public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>,
	Frank Li <Frank.Li@nxp.com>, Peng Fan <peng.fan@nxp.com>,
	Fabio Estevam <festevam@gmail.com>,
	Sasha Levin <sashal@kernel.org>,
	robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	shawnguo@kernel.org, l.stach@pengutronix.de, agx@sigxcpu.org,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH AUTOSEL 6.18] arm64: dts: imx8mq: Set the correct gpu_ahb clock frequency
Date: Mon, 20 Apr 2026 09:21:52 -0400	[thread overview]
Message-ID: <20260420132314.1023554-318-sashal@kernel.org> (raw)
In-Reply-To: <20260420132314.1023554-1-sashal@kernel.org>

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

[ Upstream commit 1f99b5d93d99ca17d50b386a674d0ce1f20932d8 ]

According to i.MX 8M Quad Reference Manual, GPU_AHB_CLK_ROOT's maximum
frequency is 400MHz.

Fixes: 45d2c84eb3a2 ("arm64: dts: imx8mq: add GPU node")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

LLM Generated explanations, may be completely bogus:

Error: Failed to generate final synthesis

 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 607962f807beb..6a25e219832ce 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1632,7 +1632,7 @@ gpu: gpu@38000000 {
 			                         <&clk IMX8MQ_GPU_PLL_OUT>,
 			                         <&clk IMX8MQ_GPU_PLL>;
 			assigned-clock-rates = <800000000>, <800000000>,
-			                       <800000000>, <800000000>, <0>;
+			                       <800000000>, <400000000>, <0>;
 			power-domains = <&pgc_gpu>;
 		};
 
-- 
2.53.0



  parent reply	other threads:[~2026-04-20 13:33 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20260420132314.1023554-1-sashal@kernel.org>
2026-04-20 13:17 ` [PATCH AUTOSEL 7.0-5.10] clk: spear: fix resource leak in clk_register_vco_pll() Sasha Levin
2026-04-20 13:17 ` [PATCH AUTOSEL 7.0-5.10] ARM: xen: validate hypervisor compatible before parsing its version Sasha Levin
2026-04-20 13:17 ` [PATCH AUTOSEL 7.0-6.19] wifi: mt76: avoid to set ACK for MCU command if wait_resp is not set Sasha Levin
2026-04-20 13:17 ` [PATCH AUTOSEL 7.0-6.18] phy: phy-mtk-tphy: Update names and format of kernel-doc comments Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 6.18] ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.18] drm/imx: parallel-display: add DRM_DISPLAY_HELPER for DRM_IMX_PARALLEL_DISPLAY Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.1] ASoC: mxs-sgtl5000: disable MCLK on error paths of mxs_sgtl5000_probe() Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.12] Bluetooth: btmtk: add MT7902 MCU support Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.18] wifi: mt76: flush pending TX before channel switch Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.6] wifi: mt76: fix list corruption in mt76_wcid_cleanup Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.12] wifi: mt76: add missing lock protection in mt76_sta_state for sta_event callback Sasha Levin
2026-04-20 13:18 ` [PATCH AUTOSEL 7.0-6.1] Bluetooth: btmtk: improve mt79xx firmware setup retry flow Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.18] wifi: mt76: mt7996: Disable Rx hdr_trans in monitor mode Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.12] drivers/virt: pkvm: Add Kconfig dependency on DMA_RESTRICTED_POOL Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.12] wifi: mt76: mt7925: Skip scan process during suspend Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-5.10] wifi: mt76: mt76x02: wake queues after reconfig Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.12] wifi: mt76: mt7925: resolve link after acquiring mt76 mutex Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 7.0-6.18] wifi: mt76: mt7996: fix queue pause after scan due to wrong channel switch reason Sasha Levin
2026-04-20 13:19 ` [PATCH AUTOSEL 6.18] ASoC: stm32_sai: fix incorrect BCLK polarity for DSP_A/B, LEFT_J Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 7.0-6.12] net: ethernet: mtk_eth_soc: avoid writing to ESW registers on MT7628 Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 6.18] media: rkvdec: reduce stack usage in rkvdec_init_v4l2_vp9_count_tbl() Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 6.18] soc: aspeed: socinfo: Mask table entries for accurate SoC ID matching Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 6.18] arm64: dts: imx93-9x9-qsb: change usdhc tuning step for eMMC and SD Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 7.0-6.6] wifi: mt76: mt7996: reset device after MCU message timeout Sasha Levin
2026-04-20 13:20 ` [PATCH AUTOSEL 7.0] spi: stm32: fix rx DMA request error handling Sasha Levin
2026-04-20 13:21 ` [PATCH AUTOSEL 7.0-5.10] drm/mediatek: mtk_dsi: enable hs clock during pre-enable Sasha Levin
2026-04-20 13:21 ` [PATCH AUTOSEL 7.0-6.18] wifi: mt76: mt7996: fix frequency separation for station STR mode Sasha Levin
2026-04-20 13:21 ` Sasha Levin [this message]
2026-04-20 13:22 ` [PATCH AUTOSEL 6.18] net: airoha: Fix memory leak in airoha_qdma_rx_process() Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260420132314.1023554-318-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=Frank.Li@nxp.com \
    --cc=agx@sigxcpu.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=krzk+dt@kernel.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@lists.linux.dev \
    --cc=peng.fan@nxp.com \
    --cc=robh@kernel.org \
    --cc=sebastian.krzyszkowiak@puri.sm \
    --cc=shawnguo@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox