[PATCH 0/7] dts: Add /firmware/#{address,size}-cells to Chromium-based DTs

[PATCH 0/7] dts: Add /firmware/#{address,size}-cells to Chromium-based DTs

[Brian Norris]

Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:

  ## From a RK3399 Gru/Kevin Chromebook:
  # find /sys/firmware/devicetree/base/firmware
  /sys/firmware/devicetree/base/firmware
  /sys/firmware/devicetree/base/firmware/coreboot
  /sys/firmware/devicetree/base/firmware/coreboot/ram-code
  /sys/firmware/devicetree/base/firmware/coreboot/compatible
  /sys/firmware/devicetree/base/firmware/coreboot/board-id
  /sys/firmware/devicetree/base/firmware/coreboot/reg
  /sys/firmware/devicetree/base/firmware/coreboot/name
  /sys/firmware/devicetree/base/firmware/chromeos
  /sys/firmware/devicetree/base/firmware/chromeos/readonly-firmware-version
  /sys/firmware/devicetree/base/firmware/chromeos/active-ec-firmware
  /sys/firmware/devicetree/base/firmware/chromeos/firmware-version
  /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-storage
  /sys/firmware/devicetree/base/firmware/chromeos/vboot-shared-data
  /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-size
  /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-offset
  /sys/firmware/devicetree/base/firmware/chromeos/hardware-id
  /sys/firmware/devicetree/base/firmware/chromeos/compatible
  /sys/firmware/devicetree/base/firmware/chromeos/firmware-type
  /sys/firmware/devicetree/base/firmware/chromeos/fmap-offset
  /sys/firmware/devicetree/base/firmware/chromeos/name
  /sys/firmware/devicetree/base/firmware/ranges
  /sys/firmware/devicetree/base/firmware/name

The /firmware node has an empty 'ranges', but does not have
address/size-cells.

Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:

[    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22

This series adds appropriate #{address,size}-cells to the device trees
used on Arm Chromebooks to work around the problem.

Note that Google provides bootloader updates for some devices that add
{address,size}-cells [1], but these are only delivered via Google OS
updates. Not all users receive Google software updates, and even if they
do, not all devices still receive bootloader updates from Google.

This problem was first noticed in OpenWrt, where some Chromium-based
routers ran into the same issue:

https://github.com/openwrt/openwrt/issues/21243

Relevant OpenWrt fixes: https://github.com/openwrt/openwrt/pull/22951

There is also discussion at [2].

I've currently only tested:
1) the aforementioned OpenWrt routers (with non-upstream DTS/DTB)
2) RK3399 Gru/Kevin Chromebook (patch 1)
3) Qualcomm SC7280 Herobrine (patch 7)

I assume the others should follow the same pattern. I don't know if I've
covered every relevant Depthcharge-using device, but I've made a good
attempt to identify them all.

I reviewed Depthcharge code history and found that this problematic
bootloader behavior dates back to at least 2014, with the Tegra/Nyan
device. Older devices may have similar DTB structures, but I'm not sure
if they have the same address-cells problems. In any case, these changes
shouldn't hurt even if a device was not affected.

Brian

[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
    https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
    #size-cells for firmware node")

[2] [regression] of: mis-parsing Depthcharge's /firmware
    https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/


Brian Norris (7):
  arm64: dts: rockchip: Add #{address,size}-cells to Chromium-based
    /firmware
  ARM: dts: rockchip: Add #{address,size}-cells to Chromium-based
    /firmware
  ARM: dts: nvidia: Add #{address,size}-cells to Chromium-based
    /firmware
  ARM: dts: samsung: Add #{address,size}-cells to Chromium-based
    /firmware
  arm64: dts: mediatek: Add #{address,size}-cells to Chromium-based
    /firmware
  arm64: dts: nvidia: Add #{address,size}-cells to Chromium-based
    /firmware
  arm64: dts: qcom: Add #{address,size}-cells to Chromium-based
    /firmware

 arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi           | 5 +++++
 arch/arm/boot/dts/nvidia/tegra124-venice2.dts         | 5 +++++
 arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi         | 5 +++++
 arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi | 5 +++++
 arch/arm/boot/dts/samsung/exynos5250-spring.dts       | 5 +++++
 arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts    | 5 +++++
 arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts     | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi          | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi        | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi      | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi       | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi      | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi       | 5 +++++
 arch/arm64/boot/dts/nvidia/tegra132-norrin.dts        | 5 +++++
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts         | 5 +++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi          | 5 +++++
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi        | 5 +++++
 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi          | 5 +++++
 18 files changed, 90 insertions(+)

-- 
2.54.0.545.g6539524ca2-goog

[PATCH 1/7] arm64: dts: rockchip: Add #{address,size}-cells to Chromium-based /firmware

[Brian Norris]

Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:

  ## From a RK3399 Gru/Kevin Chromebook:
  # find /sys/firmware/devicetree/base/firmware
  /sys/firmware/devicetree/base/firmware
  /sys/firmware/devicetree/base/firmware/coreboot
  /sys/firmware/devicetree/base/firmware/coreboot/ram-code
  /sys/firmware/devicetree/base/firmware/coreboot/compatible
  /sys/firmware/devicetree/base/firmware/coreboot/board-id
  /sys/firmware/devicetree/base/firmware/coreboot/reg
  /sys/firmware/devicetree/base/firmware/coreboot/name
  /sys/firmware/devicetree/base/firmware/chromeos
  /sys/firmware/devicetree/base/firmware/chromeos/readonly-firmware-version
  /sys/firmware/devicetree/base/firmware/chromeos/active-ec-firmware
  /sys/firmware/devicetree/base/firmware/chromeos/firmware-version
  /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-storage
  /sys/firmware/devicetree/base/firmware/chromeos/vboot-shared-data
  /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-size
  /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-offset
  /sys/firmware/devicetree/base/firmware/chromeos/hardware-id
  /sys/firmware/devicetree/base/firmware/chromeos/compatible
  /sys/firmware/devicetree/base/firmware/chromeos/firmware-type
  /sys/firmware/devicetree/base/firmware/chromeos/fmap-offset
  /sys/firmware/devicetree/base/firmware/chromeos/name
  /sys/firmware/devicetree/base/firmware/ranges
  /sys/firmware/devicetree/base/firmware/name

The /firmware node has an empty 'ranges', but does not have
address/size-cells.

Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:

[    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22

Add appropriate #{address,size}-cells to work around the problem.

Note that Google has also patched the Depthcharge bootloader source to
add {address,size}-cells [1], but bootloader updates are typically
delivered only via Google OS updates. Not all users install Google
software updates, and even if they do, Google may not produce updated
binaries for all/older devices.

[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
    https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
    #size-cells for firmware node")

Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
Signed-off-by: Brian Norris <briannorris@chromium.org>
---

 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 7eca1da78cff..2f9e39671efc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -18,6 +18,11 @@ chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	/*
 	 * Power Tree
 	 *
-- 
2.54.0.545.g6539524ca2-goog

[PATCH 2/7] ARM: dts: rockchip: Add #{address,size}-cells to Chromium-based /firmware

[Brian Norris]

Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:

/ {
	firmware {
		ranges;

		coreboot {
			compatible = "coreboot";
			reg = <...>;
			...;
		};
	};
};

Notably, the /firmware node has an empty 'ranges', but does not have
address/size-cells.

Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:

[    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22

Add appropriate #{address,size}-cells to work around the problem.

Note that Google has also patched the Depthcharge bootloader source to
add {address,size}-cells [1], but bootloader updates are typically
delivered only via Google OS updates. Not all users install Google
software updates, and even if they do, Google may not produce updated
binaries for all/older devices.

[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
    https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
    #size-cells for firmware node")

Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
Signed-off-by: Brian Norris <briannorris@chromium.org>
---

 arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi
index 2d6cf08d00f9..ca8e8e735078 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi
@@ -18,6 +18,11 @@ chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
+	firmware {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
 	/*
 	 * The default coreboot on veyron devices ignores memory@0 nodes
 	 * and would instead create another memory node.
-- 
2.54.0.545.g6539524ca2-goog

[PATCH 3/7] ARM: dts: nvidia: Add #{address,size}-cells to Chromium-based /firmware

[Brian Norris]

Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:

/ {
        firmware {
                ranges;

                coreboot {
                        compatible = "coreboot";
                        reg = <...>;
                        ...;
                };
        };
};

Notably, the /firmware node has an empty 'ranges', but does not have
address/size-cells.

Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:

[    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22

Add appropriate #{address,size}-cells to work around the problem.

Note that Google has also patched the Depthcharge bootloader source to
add {address,size}-cells [1], but bootloader updates are typically
delivered only via Google OS updates. Not all users install Google
software updates, and even if they do, Google may not produce updated
binaries for all/older devices.

[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
    https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
    #size-cells for firmware node")

Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
Signed-off-by: Brian Norris <briannorris@chromium.org>
---

 arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi   | 5 +++++
 arch/arm/boot/dts/nvidia/tegra124-venice2.dts | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
index 974c76f007db..89a749cb8933 100644
--- a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
@@ -14,6 +14,11 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
 	/*
 	 * Note that recent version of the device tree compiler (starting with
 	 * version 1.4.2) warn about this node containing a reg property, but
diff --git a/arch/arm/boot/dts/nvidia/tegra124-venice2.dts b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
index df98dc2a67b8..059ee6c5b13c 100644
--- a/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
@@ -18,6 +18,11 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
 	memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
-- 
2.54.0.545.g6539524ca2-goog

[PATCH 4/7] ARM: dts: samsung: Add #{address,size}-cells to Chromium-based /firmware

[Brian Norris]

Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:

/ {
        firmware {
                ranges;

                coreboot {
                        compatible = "coreboot";
                        reg = <...>;
                        ...;
                };
        };
};

Notably, the /firmware node has an empty 'ranges', but does not have
address/size-cells.

Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:

[    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22

Add appropriate #{address,size}-cells to work around the problem.

Note that Google has also patched the Depthcharge bootloader source to
add {address,size}-cells [1], but bootloader updates are typically
delivered only via Google OS updates. Not all users install Google
software updates, and even if they do, Google may not produce updated
binaries for all/older devices.

[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
    https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
    #size-cells for firmware node")

Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
Signed-off-by: Brian Norris <briannorris@chromium.org>
---

 arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi | 5 +++++
 arch/arm/boot/dts/samsung/exynos5250-spring.dts       | 5 +++++
 arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts    | 5 +++++
 arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts     | 5 +++++
 4 files changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi
index 65b000df176e..a64cdec3a2ef 100644
--- a/arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi
@@ -30,6 +30,11 @@ chosen {
 		stdout-path = "serial3:115200n8";
 	};
 
+	firmware {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/samsung/exynos5250-spring.dts b/arch/arm/boot/dts/samsung/exynos5250-spring.dts
index d126fccdcaf3..a337fd9e3473 100644
--- a/arch/arm/boot/dts/samsung/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-spring.dts
@@ -33,6 +33,11 @@ chosen {
 		stdout-path = "serial3:115200n8";
 	};
 
+	firmware {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts b/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts
index 3759742d38ca..f24356784492 100644
--- a/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts
@@ -50,6 +50,11 @@ chosen {
 		stdout-path = "serial3:115200n8";
 	};
 
+	firmware {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
 	fixed-rate-clocks {
 		oscclk {
 			compatible = "samsung,exynos5420-oscclk";
diff --git a/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts b/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts
index bb019868b996..3df27eddba15 100644
--- a/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts
@@ -49,6 +49,11 @@ chosen {
 		stdout-path = "serial3:115200n8";
 	};
 
+	firmware {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
 	fixed-rate-clocks {
 		oscclk {
 			compatible = "samsung,exynos5420-oscclk";
-- 
2.54.0.545.g6539524ca2-goog

[PATCH 5/7] arm64: dts: mediatek: Add #{address,size}-cells to Chromium-based /firmware

[Brian Norris]

Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:

/ {
        firmware {
                ranges;

                coreboot {
                        compatible = "coreboot";
                        reg = <...>;
                        ...;
                };
        };
};

Notably, the /firmware node has an empty 'ranges', but does not have
address/size-cells.

Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:

[    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22

Add appropriate #{address,size}-cells to work around the problem.

Note that Google has also patched the Depthcharge bootloader source to
add {address,size}-cells [1], but bootloader updates are typically
delivered only via Google OS updates. Not all users install Google
software updates, and even if they do, Google may not produce updated
binaries for all/older devices.

[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
    https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
    #size-cells for firmware node")

Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
Signed-off-by: Brian Norris <briannorris@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi     | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi   | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi  | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi | 5 +++++
 arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi  | 5 +++++
 6 files changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index a0573bc359fb..777da2129e77 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -16,6 +16,11 @@ aliases {
 		mmc2 = &mmc3;
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x80000000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index a8e257b21a88..a906ec1ce672 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -21,6 +21,11 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		#address-cells <2>;
+		#size-cells <2>;
+	};
+
 	backlight_lcd0: backlight_lcd0 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm0 0 500000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
index ff20376a44d7..2b327d9ef65e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -26,6 +26,11 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		/* The size should be filled in by the bootloader. */
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
index 8e423504ec05..ed63c74cf238 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
@@ -41,6 +41,11 @@ dmic-codec {
 		wakeup-delay-ms = <100>;
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		/* The size will be filled in by the bootloader */
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index eadf1b2d156f..b3850be25594 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -25,6 +25,11 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x80000000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index f1ff64a84267..4992631dd504 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -42,6 +42,11 @@ dmic-codec {
 		wakeup-delay-ms = <50>;
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x80000000>;
-- 
2.54.0.545.g6539524ca2-goog

[PATCH 6/7] arm64: dts: nvidia: Add #{address,size}-cells to Chromium-based /firmware

[Brian Norris]

Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:

/ {
        firmware {
                ranges;

                coreboot {
                        compatible = "coreboot";
                        reg = <...>;
                        ...;
                };
        };
};

Notably, the /firmware node has an empty 'ranges', but does not have
address/size-cells.

Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:

[    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22

Add appropriate #{address,size}-cells to work around the problem.

Note that Google has also patched the Depthcharge bootloader source to
add {address,size}-cells [1], but bootloader updates are typically
delivered only via Google OS updates. Not all users install Google
software updates, and even if they do, Google may not produce updated
binaries for all/older devices.

[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
    https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
    #size-cells for firmware node")

Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
Signed-off-by: Brian Norris <briannorris@chromium.org>
---

 arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 5 +++++
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts  | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index 683ac124523b..1f5222d43e62 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -18,6 +18,11 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index f0b8c2c80aa5..a6d31650245d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -25,6 +25,11 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
-- 
2.54.0.545.g6539524ca2-goog

[PATCH 7/7] arm64: dts: qcom: Add #{address,size}-cells to Chromium-based /firmware

[Brian Norris]

Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:

/ {
        firmware {
                ranges;

                coreboot {
                        compatible = "coreboot";
                        reg = <...>;
                        ...;
                };
        };
};

Notably, the /firmware node has an empty 'ranges', but does not have
address/size-cells.

Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:

[    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22

Add appropriate #{address,size}-cells to work around the problem.

Note that Google has also patched the Depthcharge bootloader source to
add {address,size}-cells [1], but bootloader updates are typically
delivered only via Google OS updates. Not all users install Google
software updates, and even if they do, Google may not produce updated
binaries for all/older devices.

[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
    https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
    #size-cells for firmware node")

Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
Signed-off-by: Brian Norris <briannorris@chromium.org>
---

 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi   | 5 +++++
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index b398f69917f0..cd4a0e281cf8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -99,6 +99,11 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	/* FIXED REGULATORS - parents above children */
 
 	/* This is the top level supply and variable voltage */
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 5c5e4f1dd221..58ea0532c0fb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -25,6 +25,11 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
 	/*
 	 * FIXED REGULATORS
 	 *
-- 
2.54.0.545.g6539524ca2-goog

Re: [PATCH 0/7] dts: Add /firmware/#{address,size}-cells to Chromium-based DTs

[Julius Werner]

> I reviewed Depthcharge code history and found that this problematic
> bootloader behavior dates back to at least 2014, with the Tegra/Nyan
> device. Older devices may have similar DTB structures, but I'm not sure
> if they have the same address-cells problems. In any case, these changes
> shouldn't hurt even if a device was not affected.

I can confirm that Nyan was the first Arm device shipping with
depthcharge. Note that the Exynos devices are all older and shipped
with an old fork of U-Boot that probably handled this very differently
(I believe they had `/firmware/chromeos` but not `/firmware/coreboot`,
so they wouldn't have had a `reg` node and should need no `ranges`).

Re: [PATCH 0/7] dts: Add /firmware/#{address,size}-cells to Chromium-based DTs

[Brian Norris]

On Tue, Apr 28, 2026 at 02:43:21PM -0700, Julius Werner wrote:
> > I reviewed Depthcharge code history and found that this problematic
> > bootloader behavior dates back to at least 2014, with the Tegra/Nyan
> > device. Older devices may have similar DTB structures, but I'm not sure
> > if they have the same address-cells problems. In any case, these changes
> > shouldn't hurt even if a device was not affected.
> 
> I can confirm that Nyan was the first Arm device shipping with
> depthcharge. Note that the Exynos devices are all older and shipped
> with an old fork of U-Boot that probably handled this very differently
> (I believe they had `/firmware/chromeos` but not `/firmware/coreboot`,
> so they wouldn't have had a `reg` node and should need no `ranges`).

OK, so that makes patch 4 unnecessary:

  [PATCH 4/7] ARM: dts: samsung: Add #{address,size}-cells to Chromium-based /firmware

If I respin this, I can drop it. Or if it otherwise looks good,
presumably folks can just skip patch 4.

Thanks,
Brian

Re: [PATCH 5/7] arm64: dts: mediatek: Add #{address,size}-cells to Chromium-based /firmware

[Chen-Yu Tsai]

On Wed, Apr 29, 2026 at 1:12 PM Brian Norris <briannorris@chromium.org> wrote:
>
> Chromium/Depthcharge bootloaders may dynamically add a few device nodes
> to a system's DTB under a /firmware node. A typical DT looks something
> like the following:
>
> / {
>         firmware {
>                 ranges;
>
>                 coreboot {
>                         compatible = "coreboot";
>                         reg = <...>;
>                         ...;
>                 };
>         };
> };
>
> Notably, the /firmware node has an empty 'ranges', but does not have
> address/size-cells.
>
> Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
> non-translatable addresses") started requiring #address-cells for a
> device's parent if we want to use the reg resource in a device node.
> This leads to errors like the following:
>
> [    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
>
> Add appropriate #{address,size}-cells to work around the problem.
>
> Note that Google has also patched the Depthcharge bootloader source to
> add {address,size}-cells [1], but bootloader updates are typically
> delivered only via Google OS updates. Not all users install Google
> software updates, and even if they do, Google may not produce updated
> binaries for all/older devices.
>
> [1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
>     https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
>     #size-cells for firmware node")
>
> Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
> Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
> Signed-off-by: Brian Norris <briannorris@chromium.org>

Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>

Re: [PATCH 1/7] arm64: dts: rockchip: Add #{address,size}-cells to Chromium-based /firmware

[Chen-Yu Tsai]

On Wed, Apr 29, 2026 at 1:12 PM Brian Norris <briannorris@chromium.org> wrote:
>
> Chromium/Depthcharge bootloaders may dynamically add a few device nodes
> to a system's DTB under a /firmware node. A typical DT looks something
> like the following:
>
>   ## From a RK3399 Gru/Kevin Chromebook:
>   # find /sys/firmware/devicetree/base/firmware
>   /sys/firmware/devicetree/base/firmware
>   /sys/firmware/devicetree/base/firmware/coreboot
>   /sys/firmware/devicetree/base/firmware/coreboot/ram-code
>   /sys/firmware/devicetree/base/firmware/coreboot/compatible
>   /sys/firmware/devicetree/base/firmware/coreboot/board-id
>   /sys/firmware/devicetree/base/firmware/coreboot/reg
>   /sys/firmware/devicetree/base/firmware/coreboot/name
>   /sys/firmware/devicetree/base/firmware/chromeos
>   /sys/firmware/devicetree/base/firmware/chromeos/readonly-firmware-version
>   /sys/firmware/devicetree/base/firmware/chromeos/active-ec-firmware
>   /sys/firmware/devicetree/base/firmware/chromeos/firmware-version
>   /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-storage
>   /sys/firmware/devicetree/base/firmware/chromeos/vboot-shared-data
>   /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-size
>   /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-offset
>   /sys/firmware/devicetree/base/firmware/chromeos/hardware-id
>   /sys/firmware/devicetree/base/firmware/chromeos/compatible
>   /sys/firmware/devicetree/base/firmware/chromeos/firmware-type
>   /sys/firmware/devicetree/base/firmware/chromeos/fmap-offset
>   /sys/firmware/devicetree/base/firmware/chromeos/name
>   /sys/firmware/devicetree/base/firmware/ranges
>   /sys/firmware/devicetree/base/firmware/name
>
> The /firmware node has an empty 'ranges', but does not have
> address/size-cells.
>
> Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
> non-translatable addresses") started requiring #address-cells for a
> device's parent if we want to use the reg resource in a device node.
> This leads to errors like the following:
>
> [    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
>
> Add appropriate #{address,size}-cells to work around the problem.
>
> Note that Google has also patched the Depthcharge bootloader source to
> add {address,size}-cells [1], but bootloader updates are typically
> delivered only via Google OS updates. Not all users install Google
> software updates, and even if they do, Google may not produce updated
> binaries for all/older devices.
>
> [1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
>     https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
>     #size-cells for firmware node")
>
> Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
> Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
> Signed-off-by: Brian Norris <briannorris@chromium.org>

Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>

Re: [PATCH 1/7] arm64: dts: rockchip: Add #{address,size}-cells to Chromium-based /firmware

[Doug Anderson]

Hi,

On Tue, Apr 28, 2026 at 1:07 PM Brian Norris <briannorris@chromium.org> wrote:
>
> Chromium/Depthcharge bootloaders may dynamically add a few device nodes
> to a system's DTB under a /firmware node. A typical DT looks something
> like the following:
>
>   ## From a RK3399 Gru/Kevin Chromebook:
>   # find /sys/firmware/devicetree/base/firmware
>   /sys/firmware/devicetree/base/firmware
>   /sys/firmware/devicetree/base/firmware/coreboot
>   /sys/firmware/devicetree/base/firmware/coreboot/ram-code
>   /sys/firmware/devicetree/base/firmware/coreboot/compatible
>   /sys/firmware/devicetree/base/firmware/coreboot/board-id
>   /sys/firmware/devicetree/base/firmware/coreboot/reg
>   /sys/firmware/devicetree/base/firmware/coreboot/name
>   /sys/firmware/devicetree/base/firmware/chromeos
>   /sys/firmware/devicetree/base/firmware/chromeos/readonly-firmware-version
>   /sys/firmware/devicetree/base/firmware/chromeos/active-ec-firmware
>   /sys/firmware/devicetree/base/firmware/chromeos/firmware-version
>   /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-storage
>   /sys/firmware/devicetree/base/firmware/chromeos/vboot-shared-data
>   /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-size
>   /sys/firmware/devicetree/base/firmware/chromeos/nonvolatile-context-offset
>   /sys/firmware/devicetree/base/firmware/chromeos/hardware-id
>   /sys/firmware/devicetree/base/firmware/chromeos/compatible
>   /sys/firmware/devicetree/base/firmware/chromeos/firmware-type
>   /sys/firmware/devicetree/base/firmware/chromeos/fmap-offset
>   /sys/firmware/devicetree/base/firmware/chromeos/name
>   /sys/firmware/devicetree/base/firmware/ranges
>   /sys/firmware/devicetree/base/firmware/name
>
> The /firmware node has an empty 'ranges', but does not have
> address/size-cells.
>
> Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
> non-translatable addresses") started requiring #address-cells for a
> device's parent if we want to use the reg resource in a device node.
> This leads to errors like the following:
>
> [    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
>
> Add appropriate #{address,size}-cells to work around the problem.
>
> Note that Google has also patched the Depthcharge bootloader source to
> add {address,size}-cells [1], but bootloader updates are typically
> delivered only via Google OS updates. Not all users install Google
> software updates, and even if they do, Google may not produce updated
> binaries for all/older devices.
>
> [1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
>     https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
>     #size-cells for firmware node")
>
> Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
> Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
> Signed-off-by: Brian Norris <briannorris@chromium.org>

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH 2/7] ARM: dts: rockchip: Add #{address,size}-cells to Chromium-based /firmware

[Doug Anderson]

Hi,

On Tue, Apr 28, 2026 at 1:07 PM Brian Norris <briannorris@chromium.org> wrote:
>
> Chromium/Depthcharge bootloaders may dynamically add a few device nodes
> to a system's DTB under a /firmware node. A typical DT looks something
> like the following:
>
> / {
>         firmware {
>                 ranges;
>
>                 coreboot {
>                         compatible = "coreboot";
>                         reg = <...>;
>                         ...;
>                 };
>         };
> };
>
> Notably, the /firmware node has an empty 'ranges', but does not have
> address/size-cells.
>
> Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
> non-translatable addresses") started requiring #address-cells for a
> device's parent if we want to use the reg resource in a device node.
> This leads to errors like the following:
>
> [    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
>
> Add appropriate #{address,size}-cells to work around the problem.
>
> Note that Google has also patched the Depthcharge bootloader source to
> add {address,size}-cells [1], but bootloader updates are typically
> delivered only via Google OS updates. Not all users install Google
> software updates, and even if they do, Google may not produce updated
> binaries for all/older devices.
>
> [1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
>     https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
>     #size-cells for firmware node")
>
> Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
> Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
>
>  arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH 3/7] ARM: dts: nvidia: Add #{address,size}-cells to Chromium-based /firmware

[Doug Anderson]

Hi,

On Tue, Apr 28, 2026 at 1:07 PM Brian Norris <briannorris@chromium.org> wrote:
>
> Chromium/Depthcharge bootloaders may dynamically add a few device nodes
> to a system's DTB under a /firmware node. A typical DT looks something
> like the following:
>
> / {
>         firmware {
>                 ranges;
>
>                 coreboot {
>                         compatible = "coreboot";
>                         reg = <...>;
>                         ...;
>                 };
>         };
> };
>
> Notably, the /firmware node has an empty 'ranges', but does not have
> address/size-cells.
>
> Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
> non-translatable addresses") started requiring #address-cells for a
> device's parent if we want to use the reg resource in a device node.
> This leads to errors like the following:
>
> [    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
>
> Add appropriate #{address,size}-cells to work around the problem.
>
> Note that Google has also patched the Depthcharge bootloader source to
> add {address,size}-cells [1], but bootloader updates are typically
> delivered only via Google OS updates. Not all users install Google
> software updates, and even if they do, Google may not produce updated
> binaries for all/older devices.
>
> [1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
>     https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
>     #size-cells for firmware node")
>
> Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
> Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
> Signed-off-by: Brian Norris <briannorris@chromium.org>

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH 4/7] ARM: dts: samsung: Add #{address,size}-cells to Chromium-based /firmware

[Doug Anderson]

Hi,

On Tue, Apr 28, 2026 at 1:07 PM Brian Norris <briannorris@chromium.org> wrote:
>
> Chromium/Depthcharge bootloaders may dynamically add a few device nodes
> to a system's DTB under a /firmware node. A typical DT looks something
> like the following:
>
> / {
>         firmware {
>                 ranges;
>
>                 coreboot {
>                         compatible = "coreboot";
>                         reg = <...>;
>                         ...;
>                 };
>         };
> };
>
> Notably, the /firmware node has an empty 'ranges', but does not have
> address/size-cells.
>
> Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
> non-translatable addresses") started requiring #address-cells for a
> device's parent if we want to use the reg resource in a device node.
> This leads to errors like the following:
>
> [    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
>
> Add appropriate #{address,size}-cells to work around the problem.
>
> Note that Google has also patched the Depthcharge bootloader source to
> add {address,size}-cells [1], but bootloader updates are typically
> delivered only via Google OS updates. Not all users install Google
> software updates, and even if they do, Google may not produce updated
> binaries for all/older devices.
>
> [1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
>     https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
>     #size-cells for firmware node")
>
> Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
> Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
>
>  arch/arm/boot/dts/samsung/exynos5250-snow-common.dtsi | 5 +++++
>  arch/arm/boot/dts/samsung/exynos5250-spring.dts       | 5 +++++
>  arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts    | 5 +++++
>  arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts     | 5 +++++
>  4 files changed, 20 insertions(+)

As per:

http://lore.kernel.org/r/afExm9HeB-FMmP4P@google.com

This patch shouldn't land.

Re: [PATCH 5/7] arm64: dts: mediatek: Add #{address,size}-cells to Chromium-based /firmware

[Doug Anderson]

Hi,

On Tue, Apr 28, 2026 at 1:07 PM Brian Norris <briannorris@chromium.org> wrote:
>
> Chromium/Depthcharge bootloaders may dynamically add a few device nodes
> to a system's DTB under a /firmware node. A typical DT looks something
> like the following:
>
> / {
>         firmware {
>                 ranges;
>
>                 coreboot {
>                         compatible = "coreboot";
>                         reg = <...>;
>                         ...;
>                 };
>         };
> };
>
> Notably, the /firmware node has an empty 'ranges', but does not have
> address/size-cells.
>
> Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
> non-translatable addresses") started requiring #address-cells for a
> device's parent if we want to use the reg resource in a device node.
> This leads to errors like the following:
>
> [    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
>
> Add appropriate #{address,size}-cells to work around the problem.
>
> Note that Google has also patched the Depthcharge bootloader source to
> add {address,size}-cells [1], but bootloader updates are typically
> delivered only via Google OS updates. Not all users install Google
> software updates, and even if they do, Google may not produce updated
> binaries for all/older devices.
>
> [1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
>     https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
>     #size-cells for firmware node")
>
> Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
> Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
>
>  arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi     | 5 +++++
>  arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi   | 5 +++++
>  arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi | 5 +++++
>  arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi  | 5 +++++
>  arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi | 5 +++++
>  arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi  | 5 +++++
>  6 files changed, 30 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH 6/7] arm64: dts: nvidia: Add #{address,size}-cells to Chromium-based /firmware

[Doug Anderson]

Hi,

On Tue, Apr 28, 2026 at 1:07 PM Brian Norris <briannorris@chromium.org> wrote:
>
> Chromium/Depthcharge bootloaders may dynamically add a few device nodes
> to a system's DTB under a /firmware node. A typical DT looks something
> like the following:
>
> / {
>         firmware {
>                 ranges;
>
>                 coreboot {
>                         compatible = "coreboot";
>                         reg = <...>;
>                         ...;
>                 };
>         };
> };
>
> Notably, the /firmware node has an empty 'ranges', but does not have
> address/size-cells.
>
> Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
> non-translatable addresses") started requiring #address-cells for a
> device's parent if we want to use the reg resource in a device node.
> This leads to errors like the following:
>
> [    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
>
> Add appropriate #{address,size}-cells to work around the problem.
>
> Note that Google has also patched the Depthcharge bootloader source to
> add {address,size}-cells [1], but bootloader updates are typically
> delivered only via Google OS updates. Not all users install Google
> software updates, and even if they do, Google may not produce updated
> binaries for all/older devices.
>
> [1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
>     https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
>     #size-cells for firmware node")
>
> Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
> Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
>
>  arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 5 +++++
>  arch/arm64/boot/dts/nvidia/tegra210-smaug.dts  | 5 +++++
>  2 files changed, 10 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Re: [PATCH 7/7] arm64: dts: qcom: Add #{address,size}-cells to Chromium-based /firmware

[Doug Anderson]

Hi,

On Tue, Apr 28, 2026 at 1:07 PM Brian Norris <briannorris@chromium.org> wrote:
>
> Chromium/Depthcharge bootloaders may dynamically add a few device nodes
> to a system's DTB under a /firmware node. A typical DT looks something
> like the following:
>
> / {
>         firmware {
>                 ranges;
>
>                 coreboot {
>                         compatible = "coreboot";
>                         reg = <...>;
>                         ...;
>                 };
>         };
> };
>
> Notably, the /firmware node has an empty 'ranges', but does not have
> address/size-cells.
>
> Commit 6e5773d52f4a ("of/address: Fix WARN when attempting translating
> non-translatable addresses") started requiring #address-cells for a
> device's parent if we want to use the reg resource in a device node.
> This leads to errors like the following:
>
> [    7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
>
> Add appropriate #{address,size}-cells to work around the problem.
>
> Note that Google has also patched the Depthcharge bootloader source to
> add {address,size}-cells [1], but bootloader updates are typically
> delivered only via Google OS updates. Not all users install Google
> software updates, and even if they do, Google may not produce updated
> binaries for all/older devices.
>
> [1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/
>     https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
>     #size-cells for firmware node")
>
> Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
> Fixes: 6e5773d52f4a ("of/address: Fix WARN when attempting translating non-translatable addresses")
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
>
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi   | 5 +++++
>  arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 5 +++++
>  2 files changed, 10 insertions(+)

Reviewed-by: Douglas Anderson <dianders@chromium.org>