[PATCH v4 2/6] drm/verisilicon: add register-level macros for DC8000

[Joey Lu <a0987203069@gmail.com>]

Add register-level constants needed by the forthcoming DC8000 (DCUltraLite)
hardware ops:

  VSDC_DISP_IRQ_VSYNC(n) in vs_crtc_regs.h: bit mask for per-output
  VSYNC interrupt bits in DISP_IRQ_STA (0x147C) / DISP_IRQ_EN (0x1480),
  which are the IRQ registers used by DCUltraLite in place of the DC8200
  TOP_IRQ_ACK / TOP_IRQ_EN registers.

  VSDC_FB_CONFIG_ENABLE (bit 0), VSDC_FB_CONFIG_VALID (bit 3) and
  VSDC_FB_CONFIG_RESET (bit 4) in vs_primary_plane_regs.h: control bits
  in the FB_CONFIG register used by DCUltraLite for framebuffer enable
  and per-frame commit handshake.

No behaviour change for existing DC8200 platforms.

Signed-off-by: Joey Lu <a0987203069@gmail.com>
---
 drivers/gpu/drm/verisilicon/vs_crtc_regs.h          | 1 +
 drivers/gpu/drm/verisilicon/vs_primary_plane_regs.h | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/verisilicon/vs_crtc_regs.h b/drivers/gpu/drm/verisilicon/vs_crtc_regs.h
index c7930e817635..d4da22b08cd5 100644
--- a/drivers/gpu/drm/verisilicon/vs_crtc_regs.h
+++ b/drivers/gpu/drm/verisilicon/vs_crtc_regs.h
@@ -54,6 +54,7 @@
 #define VSDC_DISP_GAMMA_DATA(n)			(0x1460 + 0x4 * (n))
 
 #define VSDC_DISP_IRQ_STA			0x147C
+#define VSDC_DISP_IRQ_VSYNC(n)			BIT(n)
 
 #define VSDC_DISP_IRQ_EN			0x1480
 
diff --git a/drivers/gpu/drm/verisilicon/vs_primary_plane_regs.h b/drivers/gpu/drm/verisilicon/vs_primary_plane_regs.h
index cbb125c46b39..67d4b00f294e 100644
--- a/drivers/gpu/drm/verisilicon/vs_primary_plane_regs.h
+++ b/drivers/gpu/drm/verisilicon/vs_primary_plane_regs.h
@@ -16,6 +16,9 @@
 #define VSDC_FB_STRIDE(n)			(0x1408 + 0x4 * (n))
 
 #define VSDC_FB_CONFIG(n)			(0x1518 + 0x4 * (n))
+#define VSDC_FB_CONFIG_ENABLE			BIT(0)
+#define VSDC_FB_CONFIG_VALID			BIT(3)
+#define VSDC_FB_CONFIG_RESET			BIT(4)
 #define VSDC_FB_CONFIG_CLEAR_EN			BIT(8)
 #define VSDC_FB_CONFIG_ROT_MASK			GENMASK(13, 11)
 #define VSDC_FB_CONFIG_ROT(v)			((v) << 11)
-- 
2.43.0