[PATCH v9 26/38] phy: rockchip: usbdp: Add some extra debug messages

[Sebastian Reichel <sebastian.reichel@collabora.com>]

It's useful to log PHY reinit to ease debugging issues around
USB-C hotplugging.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index c874dfeeece9..6b0add354880 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -24,6 +24,7 @@
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
+#include <linux/string_choices.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/typec_dp.h>
 #include <linux/usb/typec_mux.h>
@@ -468,6 +469,8 @@ static int rk_udphy_reset_deassert(struct rk_udphy *udphy, char *name)
 			return reset_control_deassert(list[idx].rstc);
 	}
 
+	dev_err(udphy->dev, "failed to de-assert missing reset line: %s\n", name);
+
 	return -EINVAL;
 }
 
@@ -494,6 +497,8 @@ static void rk_udphy_u3_port_disable(struct rk_udphy *udphy, u8 disable)
 	const struct rk_udphy_cfg *cfg = udphy->cfgs;
 	const struct rk_udphy_grf_reg *preg;
 
+	dev_dbg(udphy->dev, "USB3 port %s\n", str_on_off(!disable));
+
 	preg = udphy->id ? &cfg->grfcfg.usb3otg1_cfg : &cfg->grfcfg.usb3otg0_cfg;
 	rk_udphy_grfreg_write(udphy->usbgrf, preg, disable);
 }
@@ -668,8 +673,10 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
 		return 0;
 	}
 
-	if (udphy->flip != flipped)
+	if (udphy->flip != flipped) {
+		dev_dbg(udphy->dev, "cable orientation changed, PHY re-init required.\n");
 		udphy->phy_needs_reinit = true;
+	}
 
 	udphy->flip = flipped;
 	rk_udphy_set_typec_default_mapping(udphy);
@@ -787,6 +794,11 @@ static int rk_udphy_init(struct rk_udphy *udphy)
 	const struct rk_udphy_cfg *cfg = udphy->cfgs;
 	int ret;
 
+	dev_dbg(udphy->dev, "reinit PHY with USB=%s and DP=%s (%u lanes) flipped=%s\n",
+		str_enabled_disabled(udphy->mode & UDPHY_MODE_USB),
+		str_enabled_disabled(udphy->mode & UDPHY_MODE_DP),
+		udphy->dp_lanes, str_yes_no(udphy->flip));
+
 	rk_udphy_reset_assert_all(udphy);
 	usleep_range(10000, 11000);
 
@@ -857,6 +869,8 @@ static int rk_udphy_setup(struct rk_udphy *udphy)
 {
 	int ret;
 
+	dev_dbg(udphy->dev, "enable PHY\n");
+
 	ret = clk_bulk_prepare_enable(udphy->num_clks, udphy->clks);
 	if (ret) {
 		dev_err(udphy->dev, "failed to enable clk\n");
@@ -875,6 +889,7 @@ static int rk_udphy_setup(struct rk_udphy *udphy)
 
 static void rk_udphy_disable(struct rk_udphy *udphy)
 {
+	dev_dbg(udphy->dev, "disable PHY\n");
 	clk_bulk_disable_unprepare(udphy->num_clks, udphy->clks);
 	rk_udphy_reset_assert_all(udphy);
 }
@@ -1346,8 +1361,12 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 	struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
 
 	/* Ignore mux events not involving USB or DP */
-	if (!rk_udphy_is_supported_mode(state))
+	if (!rk_udphy_is_supported_mode(state)) {
+		dev_dbg(udphy->dev, "ignore mux event with mode=%lu\n", state->mode);
 		return 0;
+	}
+
+	dev_dbg(udphy->dev, "new mode: %lu\n", state->mode);
 
 	guard(mutex)(&udphy->mutex);
 

-- 
2.53.0