[PATCH v2 3/9] arm64: dts: imx8ulp: Correct SRAM node address and size to cover full SSRAM P2

["Peng Fan (OSS)" <peng.fan@oss.nxp.com>]

From: Peng Fan <peng.fan@nxp.com>

The SSRAM P2 partition starts at 0x22010000 with a size of 64 KB.
The previous node only mapped the last 4 KB (0x2201f000, 0x1000) which
was used for the SCMI shared memory buffer. Update the base address and
size to cover the full P2 region so it can also serve as a general
purpose SRAM pool.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index cb0d73327d86c..7d00fe8360948 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -154,17 +154,17 @@ sosc: clock-sosc {
 		#clock-cells = <0>;
 	};
 
-	sram@2201f000 {
+	sram@22010000 {
 		compatible = "mmio-sram";
-		reg = <0x0 0x2201f000 0x0 0x1000>;
+		reg = <0x0 0x22010000 0x0 0x10000>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0x0 0x2201f000 0x1000>;
+		ranges = <0 0x0 0x22010000 0x10000>;
 
-		scmi_buf: scmi-sram-section@0 {
+		scmi_buf: scmi-sram-section@f000 {
 			compatible = "arm,scmi-shmem";
-			reg = <0x0 0x400>;
+			reg = <0xf000 0x400>;
 		};
 	};
 

-- 
2.34.1