[PATCH 0/2] Add MIPI CSI-2 receiver support for RK3576

[PATCH 0/2] Add MIPI CSI-2 receiver support for RK3576

[Amin Gattout]

This series adds the device tree binding and the SoC nodes for the
MIPI CSI-2 receiver units of the Rockchip RK3576. The receiver is the
same Synopsys DesignWare IP as in the RK3568 and the register map is
identical, so the existing driver is used unchanged via a fallback
compatible.

Only the two receivers fed by the Innosilicon D-PHYs in full mode
(MIPI1 and MIPI3) are added; see patch 2 for the details.

This series depends on the RK3576 CSI D-PHY series [1], which provides
the csi_dphy0/csi_dphy1 nodes referenced here.

[1] https://lore.kernel.org/r/20260820-rk3576-dphy-v1-0-70e25e8d5e78@gmail.com

Signed-off-by: Amin Gattout <amin.gattout@gmail.com>
---
Amin Gattout (2):
      media: dt-bindings: rockchip,rk3568-mipi-csi2: add rk3576 compatible
      arm64: dts: rockchip: add mipi csi-2 receiver nodes to rk3576

 .../bindings/media/rockchip,rk3568-mipi-csi2.yaml  |  1 +
 arch/arm64/boot/dts/rockchip/rk3576.dtsi           | 52 ++++++++++++++++++++++
 2 files changed, 53 insertions(+)
---
base-commit: bd5f485f3f026225b86573e559af0b7254ef4184
change-id: 20260825-csi-2-rcv-dts-7712bd834de6
prerequisite-change-id: 20260819-rk3576-dphy-2304f848215b:v1
prerequisite-patch-id: fbe2d84f88709b8bf846debe6b8ce62c4392ca63
prerequisite-patch-id: 9bce33933ae69e8cc7f7ef2f0d9acb969620bc85
prerequisite-patch-id: aca697161c21e19fe3a7f62f208da0f6c3b666e1
prerequisite-patch-id: 8f45701f840680a35e044f43ebd3087282847990

Best regards,
--  
Amin Gattout <amin.gattout@gmail.com>

[PATCH 1/2] media: dt-bindings: rockchip,rk3568-mipi-csi2: add rk3576 compatible

[Amin Gattout]

The RK3576 MIPI CSI-2 receivers are compatible to the ones found in the
RK3568: the register map is identical. Add the RK3576 variant to the list
of compatible variants falling back to the RK3568 one.

Signed-off-by: Amin Gattout <amin.gattout@gmail.com>
---
 Documentation/devicetree/bindings/media/rockchip,rk3568-mipi-csi2.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-mipi-csi2.yaml
index 8bfad0fca3b7..1898f3787a98 100644
--- a/Documentation/devicetree/bindings/media/rockchip,rk3568-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-mipi-csi2.yaml
@@ -23,6 +23,7 @@ properties:
           - rockchip,rk3568-mipi-csi2
       - items:
           - enum:
+              - rockchip,rk3576-mipi-csi2
               - rockchip,rk3588-mipi-csi2
           - const: rockchip,rk3568-mipi-csi2
 

-- 
2.43.0

Re: [PATCH 1/2] media: dt-bindings: rockchip,rk3568-mipi-csi2: add rk3576 compatible

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 75 bytes --]

Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH 2/2] arm64: dts: rockchip: add mipi csi-2 receiver nodes to rk3576

[Amin Gattout]

The Rockchip RK3576 features five MIPI CSI-2 receiver units:
 - MIPI0: connected to MIPI DCPHY0 (not supported)
 - MIPI1: connected to MIPI DPHY0
 - MIPI2: connected to MIPI DPHY0 lanes 2-3 in split mode (not supported)
 - MIPI3: connected to MIPI DPHY1
 - MIPI4: connected to MIPI DPHY1 lanes 2-3 in split mode (not supported)

The PHY to receiver routing is fixed. Only the full/split mode of each
DPHY is selectable, via SYS_GRF_SOC_CON5 bits 1 and 2, whose reset value
selects full mode, so no software configuration is required.

As the MIPI DCPHY as well as the split DPHY mode are not yet supported,
add only the device tree nodes for the MIPI1 and MIPI3 units.

Signed-off-by: Amin Gattout <amin.gattout@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3576.dtsi | 52 ++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index b7a527614243..cbf8b70cc15a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1324,6 +1324,58 @@ vdec_mmu: iommu@27b00800 {
 			#iommu-cells = <0>;
 		};
 
+		csi1: csi@27c90000 {
+			compatible = "rockchip,rk3576-mipi-csi2", "rockchip,rk3568-mipi-csi2";
+			reg = <0x0 0x27c90000 0x0 0x10000>;
+			interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "err1", "err2";
+			clocks = <&cru PCLK_CSI_HOST_1>;
+			phys = <&csi_dphy0>;
+			power-domains = <&power RK3576_PD_VI>;
+			resets = <&cru SRST_P_CSI_HOST_1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi1_in: port@0 {
+					reg = <0>;
+				};
+
+				csi1_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csi3: csi@27cb0000 {
+			compatible = "rockchip,rk3576-mipi-csi2", "rockchip,rk3568-mipi-csi2";
+			reg = <0x0 0x27cb0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "err1", "err2";
+			clocks = <&cru PCLK_CSI_HOST_3>;
+			phys = <&csi_dphy1>;
+			power-domains = <&power RK3576_PD_VI>;
+			resets = <&cru SRST_P_CSI_HOST_3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi3_in: port@0 {
+					reg = <0>;
+				};
+
+				csi3_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		vop: vop@27d00000 {
 			compatible = "rockchip,rk3576-vop";
 			reg = <0x0 0x27d00000 0x0 0x3000>, <0x0 0x27d05000 0x0 0x1000>;

-- 
2.43.0