Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Sascha Bischoff <Sascha.Bischoff@arm.com>
To: "linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"kvmarm@lists.linux.dev" <kvmarm@lists.linux.dev>,
	"kvm@vger.kernel.org" <kvm@vger.kernel.org>
Cc: nd <nd@arm.com>, "maz@kernel.org" <maz@kernel.org>,
	"oliver.upton@linux.dev" <oliver.upton@linux.dev>,
	Joey Gouly <Joey.Gouly@arm.com>,
	Suzuki Poulose <Suzuki.Poulose@arm.com>,
	"yuzenghui@huawei.com" <yuzenghui@huawei.com>,
	"peter.maydell@linaro.org" <peter.maydell@linaro.org>,
	"lpieralisi@kernel.org" <lpieralisi@kernel.org>,
	Timothy Hayes <Timothy.Hayes@arm.com>,
	"fuad.tabba@linux.dev" <fuad.tabba@linux.dev>
Subject: [PATCH v6 29/49] KVM: arm64: gic-v5: Add GICv5 SPI injection to irqfd
Date: Fri, 4 Sep 2026 11:49:01 +0000	[thread overview]
Message-ID: <20260904113404.4051341-30-sascha.bischoff@arm.com> (raw)
In-Reply-To: <20260904113404.4051341-1-sascha.bischoff@arm.com>

Now that there is support for GICv5 SPIs in KVM, update
vgic_irqfd_set_irq() to translate irqchip pins into GICv5 SPI IntIDs
before injecting them.

Validate IRQCHIP route pins against the GIC model. GICv2 and GICv3
only support 988 pins for SPIs 32 through 1019, while KVM supports up
to 1024 GICv5 SPI pins. The common routing table is sized for the
largest supported range.

Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
---
 arch/arm64/kvm/vgic/vgic-irqfd.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kvm/vgic/vgic-irqfd.c b/arch/arm64/kvm/vgic/vgic-irqfd.c
index 19a1094536e6a..ee1a1b214f03c 100644
--- a/arch/arm64/kvm/vgic/vgic-irqfd.c
+++ b/arch/arm64/kvm/vgic/vgic-irqfd.c
@@ -19,9 +19,14 @@ static int vgic_irqfd_set_irq(struct kvm_kernel_irq_routing_entry *e,
 			struct kvm *kvm, int irq_source_id,
 			int level, bool line_status)
 {
-	unsigned int spi_id = e->irqchip.pin + VGIC_NR_PRIVATE_IRQS;
+	unsigned int spi_id;
 	int ret;
 
+	if (kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V5)
+		spi_id = vgic_v5_make_spi(e->irqchip.pin);
+	else
+		spi_id = e->irqchip.pin + VGIC_NR_PRIVATE_IRQS;
+
 	if (!vgic_valid_spi(kvm, spi_id))
 		return -EINVAL;
 
@@ -45,6 +50,13 @@ int kvm_set_routing_entry(struct kvm *kvm,
 			  struct kvm_kernel_irq_routing_entry *e,
 			  const struct kvm_irq_routing_entry *ue)
 {
+	/*
+	 * The common routing table reserves enough entries for all GICv5 SPI
+	 * pins. KVM limits GICv5 to 1024 SPI pins, while GICv2 and GICv3
+	 * only support SPIs 32..1019, leaving 988 pins.
+	 */
+	unsigned int max_irqchip_pins = vgic_is_v5(kvm) ?
+		VGIC_V5_MAX_NR_SPIS : VGIC_MAX_SPI - VGIC_NR_PRIVATE_IRQS + 1;
 	int r = -EINVAL;
 
 	switch (ue->type) {
@@ -52,8 +64,8 @@ int kvm_set_routing_entry(struct kvm *kvm,
 		e->set = vgic_irqfd_set_irq;
 		e->irqchip.irqchip = ue->u.irqchip.irqchip;
 		e->irqchip.pin = ue->u.irqchip.pin;
-		if ((e->irqchip.pin >= KVM_IRQCHIP_NUM_PINS) ||
-		    (e->irqchip.irqchip >= KVM_NR_IRQCHIPS))
+		if (e->irqchip.pin >= max_irqchip_pins ||
+		    e->irqchip.irqchip >= KVM_NR_IRQCHIPS)
 			goto out;
 		break;
 	case KVM_IRQ_ROUTING_MSI:
-- 
2.34.1


  parent reply	other threads:[~2026-09-04 11:49 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-04 11:34 [PATCH v6 00/49] KVM: arm64: Add GICv5 IRS support Sascha Bischoff
2026-09-04 11:34 ` [PATCH v6 01/49] irqchip/gic-v5: Allow KVM setup without a maintenance IRQ Sascha Bischoff
2026-09-04 11:35 ` [PATCH v6 02/49] irqchip/gic-v5: Provide OF IRS config frame attrs to KVM Sascha Bischoff
2026-09-04 11:35 ` [PATCH v6 03/49] irqchip/gic-v5: Set up gic_kvm_info on ACPI hosts Sascha Bischoff
2026-09-04 11:36 ` [PATCH v6 04/49] KVM: arm64: gic-v5: Define remaining IRS MMIO registers Sascha Bischoff
2026-09-04 11:36 ` [PATCH v6 05/49] arm64/sysreg: Add GICv5 GIC VDPEND encoding Sascha Bischoff
2026-09-04 11:37 ` [PATCH v6 06/49] arm64/sysreg: Update ICC_CR0_EL1 with LINK and LINK_IDLE fields Sascha Bischoff
2026-09-04 11:37 ` [PATCH v6 07/49] KVM: arm64: gic-v5: Cache host IRS ID registers Sascha Bischoff
2026-09-04 11:38 ` [PATCH v6 08/49] KVM: arm64: gic-v5: Add VPE doorbell domain Sascha Bischoff
2026-09-04 11:38 ` [PATCH v6 09/49] KVM: arm64: gic-v5: Create and manage VM and VPE tables Sascha Bischoff
2026-09-04 11:39 ` [PATCH v6 10/49] KVM: arm64: gic-v5: Introduce guest IST alloc and management Sascha Bischoff
2026-09-04 11:39 ` [PATCH v6 11/49] KVM: arm64: gic-v5: Implement VMT/vIST IRS MMIO Ops Sascha Bischoff
2026-09-04 11:40 ` [PATCH v6 12/49] KVM: arm64: vgic: Enforce model-specific vCPU limits Sascha Bischoff
2026-09-04 11:40 ` [PATCH v6 13/49] KVM: arm64: gic-v5: Implement VPE IRS MMIO Ops Sascha Bischoff
2026-09-04 11:41 ` [PATCH v6 14/49] KVM: arm64: gic-v5: Set up VMTEs and VPE doorbells Sascha Bischoff
2026-09-04 11:41 ` [PATCH v6 15/49] KVM: arm64: gic-v5: Add resident/non-resident hyp calls Sascha Bischoff
2026-09-04 11:42 ` [PATCH v6 16/49] KVM: arm64: gic-v5: Request doorbells when VPEs enter WFI Sascha Bischoff
2026-09-04 11:42 ` [PATCH v6 17/49] KVM: arm64: gic-v5: Introduce struct vgic_v5_irs and IRS base address Sascha Bischoff
2026-09-04 11:43 ` [PATCH v6 18/49] KVM: arm64: gic-v5: Add IRS IODEV support to MMIO handlers Sascha Bischoff
2026-09-04 11:43 ` [PATCH v6 19/49] KVM: arm64: gic-v5: Add KVM_VGIC_V5_ADDR_TYPE_IRS to UAPI Sascha Bischoff
2026-09-04 11:44 ` [PATCH v6 20/49] KVM: arm64: gic-v5: Add GICv5 IRS IODEV and MMIO emulation Sascha Bischoff
2026-09-04 11:44 ` [PATCH v6 21/49] KVM: arm64: gic-v5: Initialise per-VM IRS state Sascha Bischoff
2026-09-04 11:45 ` [PATCH v6 22/49] KVM: arm64: gic-v5: Register the IRS IODEV Sascha Bischoff
2026-09-04 11:45 ` [PATCH v6 23/49] KVM: arm64: gic-v5: Set IRICHPPIDIS based on IRS enable state Sascha Bischoff
2026-09-04 11:46 ` [PATCH v6 24/49] KVM: arm64: selftests: Update vGICv5 selftest to set IRS address Sascha Bischoff
2026-09-04 11:46 ` [PATCH v6 25/49] KVM: arm64: gic-v5: Add GIC VDPEND hyp call Sascha Bischoff
2026-09-04 11:47 ` [PATCH v6 26/49] KVM: arm64: gic: Introduce set_pending_state() to irq_ops Sascha Bischoff
2026-09-04 11:47 ` [PATCH v6 27/49] KVM: arm64: gic-v5: Support SPI injection Sascha Bischoff
2026-09-04 11:48 ` [PATCH v6 28/49] Documentation: KVM: Extend VGICv5 device attribute docs Sascha Bischoff
2026-09-04 11:49 ` Sascha Bischoff [this message]
2026-09-04 11:49 ` [PATCH v6 30/49] KVM: arm64: gic-v5: Mask per-vCPU PPI state in vgic_v5_finalize_ppi_state() Sascha Bischoff
2026-09-04 11:50 ` [PATCH v6 31/49] KVM: arm64: gic-v5: Add GICv5 EL1 sysreg userspace accessors Sascha Bischoff
2026-09-04 11:50 ` [PATCH v6 32/49] KVM: arm64: gic-v5: Handle userspace accesses to IRS MMIO region Sascha Bischoff
2026-09-04 11:51 ` [PATCH v6 33/49] KVM: arm64: gic-v5: Add CoreSight MMIO regs to IRS Sascha Bischoff
2026-09-04 11:51 ` [PATCH v6 34/49] KVM: arm64: gic-v5: Add VGICv5 IST save/restore UAPI Sascha Bischoff
2026-09-04 11:52 ` [PATCH v6 35/49] KVM: arm64: gic-v5: Implement save/restore mechanisms for ISTs Sascha Bischoff
2026-09-04 11:52 ` [PATCH v6 36/49] Documentation: KVM: Document KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS for VGICv5 Sascha Bischoff
2026-09-04 11:53 ` [PATCH v6 37/49] Documentation: KVM: Add KVM_DEV_ARM_VGIC_GRP_IRS_REGS to VGICv5 docs Sascha Bischoff
2026-09-04 11:53 ` [PATCH v6 38/49] Documentation: KVM: Add docs for KVM_DEV_ARM_VGIC_GRP_IST Sascha Bischoff
2026-09-04 11:54 ` [PATCH v6 39/49] Documentation: KVM: Add the VGICv5 IRS save/restore sequences Sascha Bischoff
2026-09-04 11:54 ` [PATCH v6 40/49] KVM: selftests: Add VGICv5 IRS address attribute tests Sascha Bischoff
2026-09-04 11:55 ` [PATCH v6 41/49] KVM: selftests: Add VGICv5 NR_IRQS " Sascha Bischoff
2026-09-04 11:55 ` [PATCH v6 42/49] KVM: selftests: Add VGICv5 IRS_REGS " Sascha Bischoff
2026-09-04 11:56 ` [PATCH v6 43/49] KVM: selftests: Add VGICv5 IST " Sascha Bischoff
2026-09-04 11:56 ` [PATCH v6 44/49] KVM: selftests: Add VGICv5 USERSPACE_PPIS tests Sascha Bischoff
2026-09-04 11:57 ` [PATCH v6 45/49] KVM: selftests: Add VGICv5 CPU sysreg attribute tests Sascha Bischoff
2026-09-04 11:57 ` [PATCH v6 46/49] KVM: selftests: Add VGICv5 SPI injection tests Sascha Bischoff
2026-09-04 11:58 ` [PATCH v6 47/49] KVM: selftests: Add VGICv5 LPI delivery tests Sascha Bischoff
2026-09-04 11:58 ` [PATCH v6 48/49] KVM: selftests: Add VGICv5 IST save/restore coverage Sascha Bischoff
2026-09-04 11:59 ` [PATCH v6 49/49] KVM: selftests: Add VGICv5 sparse vCPU IDs test Sascha Bischoff

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260904113404.4051341-30-sascha.bischoff@arm.com \
    --to=sascha.bischoff@arm.com \
    --cc=Joey.Gouly@arm.com \
    --cc=Suzuki.Poulose@arm.com \
    --cc=Timothy.Hayes@arm.com \
    --cc=fuad.tabba@linux.dev \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=lpieralisi@kernel.org \
    --cc=maz@kernel.org \
    --cc=nd@arm.com \
    --cc=oliver.upton@linux.dev \
    --cc=peter.maydell@linaro.org \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox