Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Long Zhao via B4 Relay <devnull+longzhao.ambarella.com@kernel.org>
To: Arnd Bergmann <arnd@arndb.de>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	 Alexandre Belloni <alexandre.belloni@bootlin.com>,
	soc@lists.linux.dev,  linux-arm-kernel@lists.infradead.org
Cc: "Long Zhao" <longzhao@ambarella.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Jerome Brunet" <jbrunet@baylibre.com>,
	"Linus Walleij" <linusw@kernel.org>,
	"Bartosz Golaszewski" <brgl@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Jiri Slaby" <jirislaby@kernel.org>,
	"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
	"Catalin Marinas" <catalin.marinas@arm.com>,
	"Will Deacon" <will@kernel.org>, "Long Zhao" <zl020895@163.com>,
	"Lee Jones" <lee@kernel.org>,
	mfd@lists.linux.dev, devicetree@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Krzysztof Kozlowski" <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v8 03/18] dt-bindings: clock: add Ambarella CV75 RCT
Date: Mon, 21 Sep 2026 12:23:22 +0800	[thread overview]
Message-ID: <20260921-cv75-v5-v8-3-282ff5d98dda@ambarella.com> (raw)
In-Reply-To: <20260921-cv75-v5-v8-0-282ff5d98dda@ambarella.com>

From: Long Zhao <longzhao@ambarella.com>

Document the CV75 RCT clock controller and the clock ID header used by
DT consumers.

Document #reset-cells for the RCT reset-provider role. Soft-reset line
IDs and the reset provider driver are deferred; this series has no
resets= consumers.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Long Zhao <longzhao@ambarella.com>
---
 .../bindings/clock/ambarella,cv75-rct.yaml         | 64 ++++++++++++++++++++++
 include/dt-bindings/clock/ambarella,cv75-rct.h     | 14 +++++
 2 files changed, 78 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml b/Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml
new file mode 100644
index 000000000000..be89bd75f9e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ambarella,cv75-rct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ambarella CV75 RCT Clock Controller
+
+maintainers:
+  - Long Zhao <longzhao@ambarella.com>
+
+description: |
+  The RCT (Reset and Clock Tree) block on the Ambarella CV75 SoC provides
+  PLLs, clock muxes, dividers and soft-reset controls for on-chip
+  peripherals.
+
+  The same register region is also exposed as a syscon for other SoC
+  blocks (e.g. pin drive-strength), hence the "syscon" compatible.
+
+  Clock indices are defined in include/dt-bindings/clock/ambarella,cv75-rct.h.
+
+properties:
+
+  compatible:
+    items:
+      - const: ambarella,cv75-rct
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Reference crystal oscillator (typically 24 MHz)
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ed080000 {
+        compatible = "ambarella,cv75-rct", "syscon";
+        reg = <0xed080000 0x1000>;
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/ambarella,cv75-rct.h b/include/dt-bindings/clock/ambarella,cv75-rct.h
new file mode 100644
index 000000000000..b3e965b4ff2e
--- /dev/null
+++ b/include/dt-bindings/clock/ambarella,cv75-rct.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2026 Ambarella, Inc.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_AMBARELLA_CV75_RCT_H
+#define _DT_BINDINGS_CLOCK_AMBARELLA_CV75_RCT_H
+
+#define CV75_GCLK_UART0		0
+#define CV75_GCLK_CORE		1
+#define CV75_GCLK_AHB		2
+#define CV75_GCLK_APB		3
+
+#endif

-- 
2.34.1




  parent reply	other threads:[~2026-09-21  4:30 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-21  4:23 [PATCH v8 00/18] Ambarella CV75 SoC minimal bring-up Long Zhao via B4 Relay
2026-09-21  4:23 ` [PATCH v8 01/18] dt-bindings: arm: add Ambarella CV75 platforms Long Zhao via B4 Relay
2026-09-21  4:23 ` [PATCH v8 02/18] dt-bindings: mfd: syscon: add Ambarella CV75 secure scratchpad Long Zhao via B4 Relay
2026-09-21  4:23 ` Long Zhao via B4 Relay [this message]
2026-09-21  4:23 ` [PATCH v8 04/18] dt-bindings: pinctrl: add Ambarella CV75 pinctrl Long Zhao via B4 Relay
2026-09-22  7:11   ` Linus Walleij
2026-09-22  8:28     ` zl020895
2026-10-01  7:03   ` Linus Walleij
2026-09-21  4:23 ` [PATCH v8 05/18] dt-bindings: gpio: pl061: add Ambarella CV75 variant Long Zhao via B4 Relay
2026-09-21  4:23 ` [PATCH v8 06/18] dt-bindings: serial: snps-dw-apb-uart: add ambarella,cv75-uart Long Zhao via B4 Relay
2026-09-21  4:23 ` [PATCH v8 07/18] clk: ambarella: add CV75 RCT clock controller Long Zhao via B4 Relay
2026-09-21  4:23 ` [PATCH v8 08/18] gpiolib: regmap: add write_data_after_dir quirk Long Zhao via B4 Relay
2026-09-22  7:17   ` Linus Walleij
2026-09-22  8:45     ` zl020895
2026-09-21  4:23 ` [PATCH v8 09/18] gpiolib: regmap: add gpio_regmap_get_chip() Long Zhao via B4 Relay
2026-09-21 10:35   ` Bartosz Golaszewski
2026-09-21 12:19     ` zl020895
2026-09-21 13:05       ` Bartosz Golaszewski
2026-09-21  4:23 ` [PATCH v8 10/18] gpio: pl061: convert register access to regmap Long Zhao via B4 Relay
2026-09-22  7:23   ` Linus Walleij
2026-10-02  7:48     ` Chanho Min
2026-10-02  8:03       ` Andy Shevchenko
2026-10-08  9:04     ` Wei Xu
2026-09-21  4:23 ` [PATCH v8 11/18] gpio: pl061: use IRQ_TYPE_LEVEL_MASK and IRQ_TYPE_EDGE_BOTH Long Zhao via B4 Relay
2026-09-22  7:24   ` Linus Walleij
2026-09-21  4:23 ` [PATCH v8 12/18] gpio: pl061: use cleanup helpers for locks Long Zhao via B4 Relay
2026-09-22  7:24   ` Linus Walleij
2026-09-21  4:23 ` [PATCH v8 13/18] gpio: pl061: switch data path to gpio-regmap Long Zhao via B4 Relay
2026-09-22  7:25   ` Linus Walleij
2026-09-21  4:23 ` [PATCH v8 14/18] gpio: pl061: add Ambarella register-layout variant Long Zhao via B4 Relay
2026-09-21  4:23 ` [PATCH v8 15/18] pinctrl: ambarella: add CV75 pin controller Long Zhao via B4 Relay
2026-09-22  7:28   ` Linus Walleij
2026-10-01  7:05   ` Linus Walleij
2026-09-21  4:23 ` [PATCH v8 16/18] serial: 8250_dw: add Ambarella CV75 quirks Long Zhao via B4 Relay
2026-09-21  4:23 ` [PATCH v8 17/18] arm64: ambarella: add ARCH_AMBARELLA and CV75 EVK DT Long Zhao via B4 Relay
2026-09-21  4:23 ` [PATCH v8 18/18] MAINTAINERS: add ARM/AMBARELLA SoC support Long Zhao via B4 Relay
2026-09-21 10:31 ` [PATCH v8 00/18] Ambarella CV75 SoC minimal bring-up Bartosz Golaszewski
2026-09-21 11:08   ` zl020895

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260921-cv75-v5-v8-3-282ff5d98dda@ambarella.com \
    --to=devnull+longzhao.ambarella.com@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=brgl@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=jbrunet@baylibre.com \
    --cc=jirislaby@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=krzysztof.kozlowski@oss.qualcomm.com \
    --cc=lee@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=longzhao@ambarella.com \
    --cc=mfd@lists.linux.dev \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=soc@lists.linux.dev \
    --cc=will@kernel.org \
    --cc=zl020895@163.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox