[PATCH 0/8] pwm: Fix various bugs reported by Sashiko

[PATCH 0/8] pwm: Fix various bugs reported by Sashiko

[Lee Jones]

These issues were reported by Sashiko.

Lee Jones (8):
  pwm: tegra: Prevent 32-bit period truncation and division by zero
  pwm: mxs: Return early when disabling and fix error-path clock leak
  pwm: loongson: Fix 32-bit control register truncation in
    pwm_loongson_set_polarity()
  pwm: axi-pwmgen: Enable clocks before accessing hardware registers in
    probe()
  pwm: fsl-ftm: Enable ipg_clk around regcache_sync() during resume
  pwm: omap-dmtimer: Handle negative error codes from get_pwm_status()
  pwm: tiehrpwm: Enable runtime PM before registering PWM chip
  pwm: img: Unregister PWM chip before disabling runtime PM and clocks

 drivers/pwm/pwm-axi-pwmgen.c   | 20 ++++++++++----------
 drivers/pwm/pwm-fsl-ftm.c      |  7 +++++++
 drivers/pwm/pwm-img.c          |  8 ++++----
 drivers/pwm/pwm-loongson.c     |  2 +-
 drivers/pwm/pwm-mxs.c          | 32 ++++++++++++++++++--------------
 drivers/pwm/pwm-omap-dmtimer.c |  8 ++++++--
 drivers/pwm/pwm-tegra.c        | 14 +++++++-------
 drivers/pwm/pwm-tiehrpwm.c     | 15 ++++++++-------
 8 files changed, 61 insertions(+), 45 deletions(-)

Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: David Lechner <dlechner@baylibre.com>
Cc: Drew Fustini <dfustini@baylibre.com>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Grant Erickson <marathon96@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: imx@lists.linux.dev
Cc: Joachim Eastwood <manabian@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Juxin Gao <gaojuxin@loongson.cn>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pwm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Naidu Tellapati <naidu.tellapati@gmail.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: NeilBrown <neil@brown.name>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: "Philip, Avinash" <avinashphilip@ti.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sai Masarapu <Sai.Masarapu@imgtec.com>
Cc: Sandipan Patra <spatra@nvidia.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Shenwei Wang <shenwei.wang@nxp.com>
Cc: Thierry Reding <thierry.reding@kernel.org>
Cc: Trevor Gamblin <tgamblin@baylibre.com>
Cc: "Uwe Kleine-König" <ukleinek@kernel.org>
Cc: Vaibhav Bedia <vaibhav.bedia@ti.com>
Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Xiubo Li <Li.Xiubo@freescale.com>
-- 
2.56.0.398.g882cbad275-goog

[PATCH 2/8] pwm: mxs: Return early when disabling and fix error-path clock leak

[Lee Jones]

When disabling a PWM channel (!state->enabled), the PWM core permits
state->period to be zero.  mxs_pwm_apply() currently falls through into
the period and duty-cycle calculations even when !state->enabled,
causing do_div(c, state->period) to divide by zero when state->period is
zero.  In addition, if the requested period exceeds the maximum divider
(div >= PERIOD_CDIV_MAX) while the PWM channel is currently disabled,
mxs_pwm_apply() returns -EINVAL without disabling and unpreparing
mxs->clk.

Handle the !state->enabled path upfront and return early, and balance
clk_prepare_enable() on the -EINVAL error path.

Fixes: bf29c2ff82fd ("pwm: mxs: Implement ->apply()")
Closes: https://sashiko.dev/#/bug/linux-710f863f-6964-4e4f-990a-e5043dbc1a87
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---
 drivers/pwm/pwm-mxs.c | 32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
index e1a3df6549fc..16233764fd3c 100644
--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -56,6 +56,14 @@ static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long long c;
 	unsigned int pol_bits;
 
+	if (!state->enabled) {
+		if (pwm_is_enabled(pwm)) {
+			writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
+			clk_disable_unprepare(mxs->clk);
+		}
+		return 0;
+	}
+
 	/*
 	 * If the PWM channel is disabled, make sure to turn on the
 	 * clock before calling clk_get_rate() and writing to the
@@ -67,9 +75,6 @@ static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			return ret;
 	}
 
-	if (!state->enabled && pwm_is_enabled(pwm))
-		writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
-
 	rate = clk_get_rate(mxs->clk);
 	while (1) {
 		c = rate >> cdiv_shift[div];
@@ -78,8 +83,11 @@ static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		if (c < PERIOD_PERIOD_MAX)
 			break;
 		div++;
-		if (div >= PERIOD_CDIV_MAX)
+		if (div >= PERIOD_CDIV_MAX) {
+			if (!pwm_is_enabled(pwm))
+				clk_disable_unprepare(mxs->clk);
 			return -EINVAL;
+		}
 	}
 
 	period_cycles = c;
@@ -101,16 +109,12 @@ static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	writel(PERIOD_PERIOD(period_cycles) | pol_bits | PERIOD_CDIV(div),
 	       mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
 
-	if (state->enabled) {
-		if (!pwm_is_enabled(pwm)) {
-			/*
-			 * The clock was enabled above. Just enable
-			 * the channel in the control register.
-			 */
-			writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
-		}
-	} else {
-		clk_disable_unprepare(mxs->clk);
+	if (!pwm_is_enabled(pwm)) {
+		/*
+		 * The clock was enabled above. Just enable
+		 * the channel in the control register.
+		 */
+		writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
 	}
 	return 0;
 }
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
-- 
2.56.0.398.g882cbad275-goog