[PATCH v3 0/7] clk: qcom: Add sane defaults and drop defconfig

[PATCH v3 0/7] clk: qcom: Add sane defaults and drop defconfig

[Krzysztof Kozlowski]

Merging, Bjorn:
===============
All clock changes via Qualcomm clock tree. The defconfig can wait a
cycle or could be applied via the same branch on Qualcomm tree. In case
of the latter, keep it on separate branch in case this needs to be
shared with soc@ tree.

Changes in v3:
- Add tags
- Make SDM_GCC_660 builtin
- Link to v2: https://patch.msgid.link/20260609-clk-qcom-defaults-v2-0-0c67c06dca11@oss.qualcomm.com

Changes in v2:
- Significant rework:
- Add more commits, also for arm32 drivers
- Split defconfig changes to separate commits, so clock can still go
  this cycle and defconfig later. Also, less conflicts.
- Link to v1: https://patch.msgid.link/20260416-clk-qcom-defaults-v1-0-579e75c4cfe5@oss.qualcomm.com
- Dropped most review tags, due to changes.

We should not be really asking whether to enable clock controller
drivers. This is obvious choice.

And if it does not seem obvious, then consider [1].

[1] https://lore.kernel.org/all/CAHk-%3Dwhigg3hvOy7c1j1MXFy6o6CHp0g4Tc3Y-MAk%2BXDssHU0A@mail.gmail.com/

If the approach is fine, I will do similarly with inteconnect and
pinctrl (and maybe others).

Best regards,
Krzysztof

---
Krzysztof Kozlowski (7):
      clk: qcom: Restrict IPQ5424, IPQ6018,IPQ9574, QCM2290 and others to ARM64
      clk: qcom: Restrict A7PLL and IPQ4019 GCC to ARM
      clk: qcom: Make important ARM64 drivers default
      clk: qcom: Make important ARM32 drivers default
      clk: qcom: Add defaults for desired arm64 drivers
      ARM/arm64: defconfig: Drop redundant Qualcomm clock entries
      arm64: defconfig: Switch Qualcomm SDM845, SM8150 and SM8250 drivers to modules

 arch/arm/configs/multi_v7_defconfig |   9 --
 arch/arm/configs/qcom_defconfig     |  14 ---
 arch/arm64/configs/defconfig        | 119 -----------------------
 drivers/clk/qcom/Kconfig            | 186 ++++++++++++++++++++++++++++++++++++
 4 files changed, 186 insertions(+), 142 deletions(-)
---
base-commit: efa85f42554564c3ed7e6ef611ba21025e58c28c
change-id: 20260416-clk-qcom-defaults-8c8d956fb0cd

Best regards,
--  
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

[PATCH v3 1/7] clk: qcom: Restrict IPQ5424, IPQ6018,IPQ9574, QCM2290 and others to ARM64

[Krzysztof Kozlowski]

Some clock drivers for IPQ5424, IPQ9574, QCM2290, QDU1000 and SA8775
already depend on ARM64.  IPQ6018 is ARM64 only SoC (at least upstream)
so should not be a choice for ARM 32-bit builds, to make kernels smaller
and user choices easier.

IPQ_CMN_PLL is used only by the SoCs already having clock controllers
restricted to ARM64

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 drivers/clk/qcom/Kconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 7d84c2f1d911..d4f80c6953e3 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -363,6 +363,7 @@ config IPQ_APSS_PLL
 
 config IPQ_APSS_5424
 	tristate "IPQ5424 APSS Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select IPQ_APSS_PLL
 	default y if IPQ_GCC_5424
 	help
@@ -373,6 +374,7 @@ config IPQ_APSS_5424
 config IPQ_APSS_6018
 	tristate "IPQ6018 APSS Clock Controller"
 	select IPQ_APSS_PLL
+	depends on ARM64 || COMPILE_TEST
 	depends on QCOM_APCS_IPC || COMPILE_TEST
 	depends on QCOM_SMEM
 	help
@@ -384,6 +386,7 @@ config IPQ_APSS_6018
 
 config IPQ_CMN_PLL
 	tristate "IPQ CMN PLL Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for CMN PLL clock controller on IPQ platform. The
 	  CMN PLL consumes the AHB/SYS clocks from GCC and supplies
@@ -432,6 +435,7 @@ config IPQ_GCC_5424
 
 config IPQ_GCC_6018
 	tristate "IPQ6018 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for global clock controller on ipq6018 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -457,6 +461,7 @@ config IPQ_LCC_806X
 
 config IPQ_GCC_8074
 	tristate "IPQ8074 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for global clock controller on ipq8074 devices.
@@ -466,6 +471,7 @@ config IPQ_GCC_8074
 
 config IPQ_GCC_9574
 	tristate "IPQ9574 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	help
 	  Support for global clock controller on ipq9574 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -690,6 +696,7 @@ config MSM_MMCC_8998
 
 config QCM_GCC_2290
 	tristate "QCM2290 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on QCM2290 devices.
@@ -698,6 +705,7 @@ config QCM_GCC_2290
 
 config QCM_DISPCC_2290
 	tristate "QCM2290 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCM_GCC_2290
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
@@ -869,6 +877,7 @@ config SC_DISPCC_8280XP
 config SA_GCC_8775P
 	tristate "SA8775 Global Clock Controller"
 	select QCOM_GDSC
+	depends on ARM64 || COMPILE_TEST
 	depends on COMMON_CLK_QCOM
 	help
 	  Support for the global clock controller on SA8775 devices.
@@ -877,6 +886,7 @@ config SA_GCC_8775P
 
 config SA_GPUCC_8775P
 	tristate "SA8775P Graphics clock controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	select SA_GCC_8775P
 	help
@@ -1079,6 +1089,7 @@ config QCS_Q6SSTOP_404
 
 config QDU_GCC_1000
 	tristate "QDU1000/QRU1000 Global Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
 	  Support for the global clock controller on QDU1000 and

-- 
2.53.0

[PATCH v3 2/7] clk: qcom: Restrict A7PLL and IPQ4019 GCC to ARM

[Krzysztof Kozlowski]

IPQ4019 is ARM 32-bit only SoC and QCOM_A7PLL is used only on SDX55 and
SDX65, which are 32-bit as well.

Do not allow building them for ARM64 to make built kernels smaller and
user choices easier.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
Changes in v2:
1. New patch
---
 drivers/clk/qcom/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d4f80c6953e3..f07455328e5c 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -250,6 +250,7 @@ config QCOM_A53PLL
 
 config QCOM_A7PLL
 	tristate "A7 PLL driver for SDX55 and SDX65"
+	depends on ARM || COMPILE_TEST
 	help
 	  Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with
 	  frequencies above 1GHz.
@@ -396,6 +397,7 @@ config IPQ_CMN_PLL
 
 config IPQ_GCC_4019
 	tristate "IPQ4019 Global Clock Controller"
+	depends on ARM || COMPILE_TEST
 	help
 	  Support for the global clock controller on ipq4019 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,

-- 
2.53.0

[PATCH v3 3/7] clk: qcom: Make important ARM64 drivers default

[Krzysztof Kozlowski]

Clock controller drivers are essential for booting up SoCs and are not
really optional for a given platform.  Kernel should not ask users
choice of drivers when that choice is obvious and known to the
developers that answer should be 'yes' or 'module'.

Switch all Qualcomm clock controller drivers which are chosen in
defconfig to respective default 'yes' or 'module'.

This has no impact on ARM64 defconfig include/generated/autoconf.h,
however changes few drivers for ARM 32-bit:

1. multi_v7_defconfig: Enable QCOM_CLK_RPMH as module, because SDX55
   (ARM 32-bit) uses it.

2. qcom_defconfig: Enable QCOM_A53PLL, QCOM_CLK_APCS_MSM8916 and
   MSM_GCC_8916 as built-in, because MSM8916 is also used ARM 32-bit.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
Changes in v2:
1. Add defaults for msm8994-8996-8998.
2. Move defconfig change to separate commit.
3. Drop Rb tag becauase of above.
---
 drivers/clk/qcom/Kconfig | 122 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index f07455328e5c..db3b67fafbc3 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -23,6 +23,7 @@ config CLK_ELIZA_DISPCC
 	tristate "Eliza Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_ELIZA_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controllers on Eliza SoCs.
 	  Say Y if you want to support display devices and functionality such as
@@ -32,6 +33,7 @@ config CLK_ELIZA_GCC
 	tristate "Eliza Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on Eliza devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -41,6 +43,7 @@ config CLK_ELIZA_TCSRCC
 	tristate "Eliza TCSR Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the TCSR clock controller on Eliza devices.
 	  Say Y if you want to use peripheral devices such as USB/PCIe/UFS.
@@ -49,6 +52,7 @@ config CLK_GLYMUR_DISPCC
 	tristate "Glymur Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_GLYMUR_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controllers on Qualcomm
 	  Technologies, Inc. Glymur devices.
@@ -59,6 +63,7 @@ config CLK_GLYMUR_GCC
 	tristate "Glymur Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on Glymur devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -77,6 +82,7 @@ config CLK_GLYMUR_TCSRCC
 	tristate "Glymur TCSR Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the TCSR clock controller on Glymur devices.
 	  Say Y if you want to use peripheral devices such as USB/PCIe/EDP.
@@ -94,6 +100,7 @@ config CLK_KAANAPALI_CAMCC
 	tristate "Kaanapali Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_KAANAPALI_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
 	  Kaanapali devices.
@@ -104,6 +111,7 @@ config CLK_KAANAPALI_DISPCC
 	tristate "Kaanapali Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_KAANAPALI_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  Kaanapali devices.
@@ -114,6 +122,7 @@ config CLK_KAANAPALI_GCC
 	tristate "Kaanapali Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on Kaanapali devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -123,6 +132,7 @@ config CLK_KAANAPALI_GPUCC
 	tristate "Kaanapali Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_KAANAPALI_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on Kaanapali devices.
 	  Say Y if you want to support graphics controller devices and
@@ -132,6 +142,7 @@ config CLK_KAANAPALI_TCSRCC
 	tristate "Kaanapali TCSR Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the TCSR clock controller on Kaanapali devices.
 	  Say Y if you want to use peripheral devices such as PCIe, USB, UFS.
@@ -140,6 +151,7 @@ config CLK_KAANAPALI_VIDEOCC
 	tristate "Kaanapali Video Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_KAANAPALI_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on Kaanapali devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -159,6 +171,7 @@ config CLK_X1E80100_CAMCC
 	tristate "X1E80100 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_X1E80100_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on X1E80100 devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -167,6 +180,7 @@ config CLK_X1E80100_DISPCC
 	tristate "X1E80100 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_X1E80100_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the two display clock controllers on Qualcomm
 	  Technologies, Inc. X1E80100 devices.
@@ -177,6 +191,7 @@ config CLK_X1E80100_GCC
 	tristate "X1E80100 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on Qualcomm Technologies, Inc
 	  X1E80100 devices.
@@ -187,6 +202,7 @@ config CLK_X1E80100_GPUCC
 	tristate "X1E80100 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_X1E80100_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on X1E80100 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -196,6 +212,7 @@ config CLK_X1E80100_TCSRCC
 	tristate "X1E80100 TCSR Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the TCSR clock controller on X1E80100 devices.
 	  Say Y if you want to use peripheral devices such as SD/UFS.
@@ -215,6 +232,7 @@ config CLK_X1P42100_GPUCC
 	tristate "X1P42100 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_X1E80100_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on X1P42100 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -235,6 +253,7 @@ config CLK_QCM2290_GPUCC
 	tristate "QCM2290 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCM_GCC_2290
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on QCM2290 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -242,6 +261,7 @@ config CLK_QCM2290_GPUCC
 
 config QCOM_A53PLL
 	tristate "MSM8916 A53 PLL"
+	default ARCH_QCOM
 	help
 	  Support for the A53 PLL on MSM8916 devices. It provides
 	  the CPU with frequencies above 1GHz.
@@ -260,6 +280,7 @@ config QCOM_A7PLL
 config QCOM_CLK_APCS_MSM8916
 	tristate "MSM8916 APCS Clock Controller"
 	depends on QCOM_APCS_IPC || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the APCS Clock Controller on msm8916 devices. The
 	  APCS is managing the mux and divider which feeds the CPUs.
@@ -271,6 +292,7 @@ config QCOM_CLK_APCC_MSM8996
 	select QCOM_KRYO_L2_ACCESSORS
 	select INTERCONNECT_CLK if INTERCONNECT
 	depends on ARM64
+	default ARCH_QCOM
 	help
 	  Support for the CPU clock controller on msm8996 devices.
 	  Say Y if you want to support CPU clock scaling using CPUfreq
@@ -301,6 +323,7 @@ config QCOM_CLK_RPM
 config QCOM_CLK_SMD_RPM
 	tristate "RPM over SMD based Clock Controller"
 	depends on QCOM_SMD_RPM
+	default ARCH_QCOM
 	help
 	  The RPM (Resource Power Manager) is a dedicated hardware engine for
 	  managing the shared SoC resources in order to keep the lowest power
@@ -313,6 +336,7 @@ config QCOM_CLK_SMD_RPM
 config QCOM_CLK_RPMH
 	tristate "RPMh Clock Driver"
 	depends on QCOM_RPMH
+	default ARCH_QCOM
 	help
 	 RPMh manages shared resources on some Qualcomm Technologies, Inc.
 	 SoCs. It accepts requests from other hardware subsystems via RSC.
@@ -378,6 +402,7 @@ config IPQ_APSS_6018
 	depends on ARM64 || COMPILE_TEST
 	depends on QCOM_APCS_IPC || COMPILE_TEST
 	depends on QCOM_SMEM
+	default ARCH_QCOM
 	help
 	  Support for APSS clock controller on IPQ platforms. The
 	  APSS clock controller manages the Mux and enable block that feeds the
@@ -388,6 +413,7 @@ config IPQ_APSS_6018
 config IPQ_CMN_PLL
 	tristate "IPQ CMN PLL Clock Controller"
 	depends on ARM64 || COMPILE_TEST
+	default m if ARCH_QCOM
 	help
 	  Support for CMN PLL clock controller on IPQ platform. The
 	  CMN PLL consumes the AHB/SYS clocks from GCC and supplies
@@ -406,6 +432,7 @@ config IPQ_GCC_4019
 config IPQ_GCC_5018
 	tristate "IPQ5018 Global Clock Controller"
 	depends on ARM || ARM64 || COMPILE_TEST
+	default ARCH_QCOM && ARM64
 	help
 	  Support for global clock controller on ipq5018 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -414,6 +441,7 @@ config IPQ_GCC_5018
 config IPQ_GCC_5210
 	tristate "IPQ5210 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on ipq5210 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -422,6 +450,7 @@ config IPQ_GCC_5210
 config IPQ_GCC_5332
 	tristate "IPQ5332 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on ipq5332 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -430,6 +459,7 @@ config IPQ_GCC_5332
 config IPQ_GCC_5424
 	tristate "IPQ5424 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on ipq5424 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -438,6 +468,7 @@ config IPQ_GCC_5424
 config IPQ_GCC_6018
 	tristate "IPQ6018 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for global clock controller on ipq6018 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -465,6 +496,7 @@ config IPQ_GCC_8074
 	tristate "IPQ8074 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for global clock controller on ipq8074 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -474,6 +506,7 @@ config IPQ_GCC_8074
 config IPQ_GCC_9574
 	tristate "IPQ9574 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for global clock controller on ipq9574 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -494,6 +527,7 @@ config IPQ_NSSCC_5424
 	tristate "IPQ5424 NSS Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on IPQ_GCC_5424
+	default m if ARCH_QCOM
 	help
 	  Support for NSS clock controller on ipq5424 devices.
 	  NSSCC receives the clock sources from GCC, CMN PLL and UNIPHY (PCS).
@@ -505,6 +539,7 @@ config IPQ_NSSCC_9574
         tristate "IPQ9574 NSS Clock Controller"
         depends on ARM64 || COMPILE_TEST
         depends on IPQ_GCC_9574
+	default m if ARCH_QCOM
         help
           Support for NSS clock controller on ipq9574 devices.
 
@@ -537,6 +572,7 @@ config MSM_GCC_8909
 config MSM_GCC_8916
 	tristate "MSM8916 Global Clock Controller"
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on msm8916 devices.
 	  Say Y if you want to use devices such as UART, SPI i2c, USB,
@@ -605,6 +641,7 @@ config MSM_MMCC_8960
 config MSM_GCC_8953
 	tristate "MSM8953 Global Clock Controller"
 	select QCOM_GDSC
+	default ARCH_QCOM if ARM64
 	help
 	  Support for the global clock controller on msm8953 devices.
 	  Say Y if you want to use devices such as UART, SPI i2c, USB,
@@ -641,6 +678,7 @@ config MSM_MMCC_8994
 	tristate "MSM8994 Multimedia Clock Controller"
 	select MSM_GCC_8994
 	select QCOM_GDSC
+	default m if ARCH_QCOM && ARM64
 	help
 	  Support for the multimedia clock controller on msm8994 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -648,6 +686,7 @@ config MSM_MMCC_8994
 
 config MSM_GCC_8994
 	tristate "MSM8994 Global Clock Controller"
+	default ARCH_QCOM if ARM64
 	help
 	  Support for the global clock controller on msm8994 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -656,6 +695,7 @@ config MSM_GCC_8994
 config MSM_GCC_8996
 	tristate "MSM8996 Global Clock Controller"
 	select QCOM_GDSC
+	default ARCH_QCOM if ARM64
 	help
 	  Support for the global clock controller on msm8996 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -665,6 +705,7 @@ config MSM_MMCC_8996
 	tristate "MSM8996 Multimedia Clock Controller"
 	select MSM_GCC_8996
 	select QCOM_GDSC
+	default m if ARCH_QCOM && ARM64
 	help
 	  Support for the multimedia clock controller on msm8996 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -673,6 +714,7 @@ config MSM_MMCC_8996
 config MSM_GCC_8998
 	tristate "MSM8998 Global Clock Controller"
 	select QCOM_GDSC
+	default ARCH_QCOM if ARM64
 	help
 	  Support for the global clock controller on msm8998 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -691,6 +733,7 @@ config MSM_MMCC_8998
 	tristate "MSM8998 Multimedia Clock Controller"
 	select MSM_GCC_8998
 	select QCOM_GDSC
+	default m if ARCH_QCOM && ARM64
 	help
 	  Support for the multimedia clock controller on msm8998 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -700,6 +743,7 @@ config QCM_GCC_2290
 	tristate "QCM2290 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on QCM2290 devices.
 	  Say Y if you want to use multimedia devices or peripheral
@@ -709,6 +753,7 @@ config QCM_DISPCC_2290
 	tristate "QCM2290 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCM_GCC_2290
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  QCM2290 devices.
@@ -719,6 +764,7 @@ config QCS_DISPCC_615
 	tristate "QCS615 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCS_GCC_615
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  QCS615 devices.
@@ -729,6 +775,7 @@ config QCS_CAMCC_615
 	tristate "QCS615 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCS_GCC_615
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
 	  QCS615 devices.
@@ -737,6 +784,7 @@ config QCS_CAMCC_615
 
 config QCS_GCC_404
 	tristate "QCS404 Global Clock Controller"
+	default y if ARCH_QCOM && ARM64
 	help
 	  Support for the global clock controller on QCS404 devices.
 	  Say Y if you want to use multimedia devices or peripheral
@@ -753,6 +801,7 @@ config SA_CAMCC_8775P
 	tristate "SA8775P Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SA_GCC_8775P
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
 	  SA8775P devices.
@@ -763,6 +812,7 @@ config QCS_GCC_8300
 	tristate "QCS8300 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on Qualcomm Technologies, Inc
 	  QCS8300 devices.
@@ -773,6 +823,7 @@ config QCS_GCC_615
 	tristate "QCS615 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on QCS615 devices.
 	  Say Y if you want to use multimedia devices or peripheral
@@ -782,6 +833,7 @@ config QCS_GPUCC_615
 	tristate "QCS615 Graphics clock controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCS_GCC_615
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on QCS615 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -791,6 +843,7 @@ config QCS_VIDEOCC_615
 	tristate "QCS615 Video Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCS_GCC_615
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on QCS615 devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -810,6 +863,7 @@ config SC_CAMCC_7280
 	tristate "SC7280 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
 	  SC7280 devices.
@@ -830,6 +884,7 @@ config SC_CAMCC_8280XP
 	tristate "SC8280XP Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_8280XP
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
 	  SC8280XP devices.
@@ -840,6 +895,7 @@ config SA_DISPCC_8775P
 	tristate "SA8775P Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SA_GCC_8775P
+	default m if ARCH_QCOM
 	help
 	  Support for the two display clock controllers on Qualcomm
 	  Technologies, Inc. SA8775P devices.
@@ -860,6 +916,7 @@ config SC_DISPCC_7280
 	tristate "SC7280 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc.
 	  SC7280 devices.
@@ -870,6 +927,7 @@ config SC_DISPCC_8280XP
 	tristate "SC8280XP Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_8280XP
+	default m if ARCH_QCOM
 	help
 	  Support for the two display clock controllers on Qualcomm
 	  Technologies, Inc. SC8280XP devices.
@@ -881,6 +939,7 @@ config SA_GCC_8775P
 	select QCOM_GDSC
 	depends on ARM64 || COMPILE_TEST
 	depends on COMMON_CLK_QCOM
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SA8775 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -891,6 +950,7 @@ config SA_GPUCC_8775P
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	select SA_GCC_8775P
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SA8775P devices.
 	  Say Y if you want to support graphics controller devices and
@@ -919,6 +979,7 @@ config SC_GCC_7180
 	select QCOM_GDSC
 	depends on COMMON_CLK_QCOM
 	depends on ARM64 || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SC7180 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -929,6 +990,7 @@ config SC_GCC_7280
 	select QCOM_GDSC
 	depends on COMMON_CLK_QCOM
 	depends on ARM64 || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SC7280 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -939,6 +1001,7 @@ config SC_GCC_8180X
 	select QCOM_GDSC
 	depends on COMMON_CLK_QCOM
 	depends on ARM64 || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SC8180X devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -949,6 +1012,7 @@ config SC_GCC_8280XP
 	select QCOM_GDSC
 	depends on COMMON_CLK_QCOM
 	depends on ARM64 || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SC8280XP devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -967,6 +1031,7 @@ config SC_GPUCC_7280
 	tristate "SC7280 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SC7280 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -976,6 +1041,7 @@ config SC_GPUCC_8280XP
 	tristate "SC8280XP Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_8280XP
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SC8280XP devices.
 	  Say Y if you want to support graphics controller devices and
@@ -994,6 +1060,7 @@ config SC_LPASSCC_8280XP
 	tristate "SC8280 Low Power Audio Subsystem (LPASS) Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_8280XP
+	default m if ARCH_QCOM
 	help
 	  Support for the LPASS clock controller on SC8280XP devices.
 	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
@@ -1014,6 +1081,7 @@ config SC_LPASS_CORECC_7280
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the LPASS(Low Power Audio Subsystem) core and audio clock
 	  controller on SC7280 devices.
@@ -1033,6 +1101,7 @@ config SC_VIDEOCC_7280
 	tristate "SC7280 Video Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on SC7280 devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -1042,6 +1111,7 @@ config SDM_CAMCC_845
 	tristate "SDM845 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on SDM845 devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -1093,6 +1163,7 @@ config QDU_GCC_1000
 	tristate "QDU1000/QRU1000 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on QDU1000 and
 	  QRU1000 devices. Say Y if you want to use peripheral
@@ -1111,6 +1182,7 @@ config SDM_GCC_845
 	tristate "SDM845/SDM670 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SDM845 and SDM670 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -1120,6 +1192,7 @@ config SDM_GPUCC_845
 	tristate "SDM845 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SDM845 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1130,6 +1203,7 @@ config SDM_VIDEOCC_845
 	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on SDM845 devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -1139,6 +1213,7 @@ config SDM_DISPCC_845
 	tristate "SDM845 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SDM845 devices.
@@ -1149,6 +1224,7 @@ config SDM_LPASSCC_845
 	tristate "SDM845 Low Power Audio Subsystem (LPAAS) Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_845
+	default m if ARCH_QCOM
 	help
 	  Support for the LPASS clock controller on SDM845 devices.
 	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
@@ -1175,6 +1251,7 @@ config SDX_GCC_65
 config SDX_GCC_75
 	tristate "SDX75 Global Clock Controller"
 	select QCOM_GDSC
+	default ARCH_QCOM if ARM64
 	help
 	  Support for the global clock controller on SDX75 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1192,6 +1269,7 @@ config SM_CAMCC_6350
 	tristate "SM6350 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_6350
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on SM6350 devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -1208,6 +1286,7 @@ config SM_CAMCC_MILOS
 	tristate "Milos Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_MILOS
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on Milos devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -1226,6 +1305,7 @@ config SM_CAMCC_8250
 	tristate "SM8250 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8250
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on SM8250 devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -1242,6 +1322,7 @@ config SM_CAMCC_8550
 	tristate "SM8550 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8550
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on SM8550 devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -1250,6 +1331,7 @@ config SM_CAMCC_8650
 	tristate "SM8650 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8650
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on SM8650 devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -1258,6 +1340,7 @@ config SM_CAMCC_8750
 	tristate "SM8750 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8750
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on SM8750 devices.
 	  The camera clock controller has a separate cambist controller which
@@ -1278,6 +1361,7 @@ config SM_DISPCC_6115
 	tristate "SM6115 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_6115
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SM6115/SM4250 devices.
@@ -1308,6 +1392,7 @@ config SM_DISPCC_8250
 	tristate "SM8150/SM8250/SM8350 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_8150 || SM_GCC_8250 || SM_GCC_8350
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SM8150/SM8250/SM8350 devices.
@@ -1318,6 +1403,7 @@ config SM_DISPCC_6350
 	tristate "SM6350 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_6350
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SM6350 devices.
@@ -1338,6 +1424,7 @@ config SM_DISPCC_MILOS
 	tristate "Milos Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_MILOS
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  Milos devices.
@@ -1348,6 +1435,7 @@ config SM_DISPCC_8450
 	tristate "SM8450 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_8450
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SM8450 or SM8475 devices.
@@ -1358,6 +1446,7 @@ config SM_DISPCC_8550
 	tristate "SM8550 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_8550 || SM_GCC_8650 || SAR_GCC_2130P
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SAR2130P, SM8550 or SM8650 devices.
@@ -1369,6 +1458,7 @@ config SM_DISPCC_8750
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_8750
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SM8750 devices.
@@ -1379,6 +1469,7 @@ config SM_GCC_4450
 	tristate "SM4450 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM4450 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -1388,6 +1479,7 @@ config SM_GCC_6115
 	tristate "SM6115 and SM4250 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM6115 and SM4250 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -1406,6 +1498,7 @@ config SM_GCC_6350
 	tristate "SM6350 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM6350 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1433,6 +1526,7 @@ config SM_GCC_MILOS
 	tristate "Milos Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on Milos devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1442,6 +1536,7 @@ config SM_GCC_8150
 	tristate "SM8150 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM8150 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1451,6 +1546,7 @@ config SM_GCC_8250
 	tristate "SM8250 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM8250 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1460,6 +1556,7 @@ config SM_GCC_8350
 	tristate "SM8350 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM8350 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1469,6 +1566,7 @@ config SM_GCC_8450
 	tristate "SM8450 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM8450 or SM8475
 	  devices.
@@ -1479,6 +1577,7 @@ config SM_GCC_8550
 	tristate "SM8550 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM8550 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1488,6 +1587,7 @@ config SM_GCC_8650
 	tristate "SM8650 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM8650 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1497,6 +1597,7 @@ config SM_GCC_8750
 	tristate "SM8750 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM8750 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1515,6 +1616,7 @@ config SM_GPUCC_6115
 	tristate "SM6115 Graphics Clock Controller"
 	select SM_GCC_6115
 	depends on ARM64 || COMPILE_TEST
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM6115 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1542,6 +1644,7 @@ config SM_GPUCC_6350
 	tristate "SM6350 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_6350
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM6350 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1551,6 +1654,7 @@ config SM_GPUCC_MILOS
 	tristate "Milos Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_MILOS
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on Milos devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1560,6 +1664,7 @@ config SM_GPUCC_8150
 	tristate "SM8150 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8150
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM8150 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1569,6 +1674,7 @@ config SM_GPUCC_8250
 	tristate "SM8250 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8250
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM8250 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1578,6 +1684,7 @@ config SM_GPUCC_8350
 	tristate "SM8350 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8350
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM8350 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1587,6 +1694,7 @@ config SM_GPUCC_8450
 	tristate "SM8450 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8450
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM8450 or SM8475
 	  devices.
@@ -1597,6 +1705,7 @@ config SM_GPUCC_8550
 	tristate "SM8550 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8550
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM8550 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1606,6 +1715,7 @@ config SM_GPUCC_8650
 	tristate "SM8650 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8650
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM8650 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1615,6 +1725,7 @@ config SM_GPUCC_8750
 	tristate "SM8750 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8750
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM8750 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1633,6 +1744,7 @@ config SM_TCSRCC_8550
 	tristate "SM8550 TCSR Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the TCSR clock controller on SM8550 devices.
 	  Say Y if you want to use peripheral devices such as SD/UFS.
@@ -1641,6 +1753,7 @@ config SM_TCSRCC_8650
 	tristate "SM8650 TCSR Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the TCSR clock controller on SM8650 devices.
 	  Say Y if you want to use peripheral devices such as SD/UFS.
@@ -1649,6 +1762,7 @@ config SM_TCSRCC_8750
 	tristate "SM8750 TCSR Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the TCSR clock controller on SM8750 devices.
 	  Say Y if you want to use peripheral devices such as UFS/USB/PCIe.
@@ -1658,6 +1772,7 @@ config SA_VIDEOCC_8775P
 	depends on ARM64 || COMPILE_TEST
 	select SA_GCC_8775P
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on Qualcomm Technologies, Inc.
 	  SA8775P devices.
@@ -1669,6 +1784,7 @@ config SM_VIDEOCC_6350
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_6350
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on SM6350 devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -1689,6 +1805,7 @@ config SM_VIDEOCC_MILOS
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_MILOS
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on Qualcomm Technologies, Inc.
 	  Milos devices.
@@ -1710,6 +1827,7 @@ config SM_VIDEOCC_8250
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8250
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on SM8250 devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -1729,6 +1847,7 @@ config SM_VIDEOCC_8550
 	tristate "SM8550 Video Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on Qualcomm Technologies, Inc.
 	  SM8550 or SM8650 or X1E80100 devices.
@@ -1740,6 +1859,7 @@ config SM_VIDEOCC_8750
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8750
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on Qualcomm Technologies, Inc.
 	  SM8750 devices.
@@ -1780,6 +1900,7 @@ config KRAITCC
 config CLK_GFM_LPASS_SM8250
 	tristate "SM8250 GFM LPASS Clocks"
 	depends on ARM64 || COMPILE_TEST
+	default m if ARCH_QCOM
 	help
 	  Support for the Glitch Free Mux (GFM) Low power audio
           subsystem (LPASS) clocks found on SM8250 SoCs.
@@ -1789,6 +1910,7 @@ config SM_VIDEOCC_8450
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8450
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on Qualcomm Technologies, Inc.
 	  SM8450 or SM8475 devices.

-- 
2.53.0

[PATCH v3 4/7] clk: qcom: Make important ARM32 drivers default

[Krzysztof Kozlowski]

Clock controller drivers are essential for booting up SoCs and are not
really optional for a given platform.  Kernel should not ask users
choice of drivers when that choice is obvious and known to the
developers that answer should be 'yes' or 'module'.

Switch all Qualcomm clock controller drivers which are chosen in
ARM 32-bit qcom defconfig to a default 'yes'.

This has no impact on ARM32 qcom defconfig and ARM64 defconfig
include/generated/autoconf.h, however enables a few drivers for ARM32
multi_v7 defconfig: IPQ_GCC_4019, QCOM_CLK_APCS_SDX55, MSM_LCC_8960,
SDX_GCC_55, QCOM_CLK_RPMH as module, IPQ_GCC_806X, IPQ_LCC_806X and
QCOM_A7PLL.  Enabling these on multi_v7 is expected to properly boot
these SoCs with defconfig.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

---

Changes in v2:
1. New patch
---
 drivers/clk/qcom/Kconfig | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index db3b67fafbc3..11adab354eb1 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -271,6 +271,7 @@ config QCOM_A53PLL
 config QCOM_A7PLL
 	tristate "A7 PLL driver for SDX55 and SDX65"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with
 	  frequencies above 1GHz.
@@ -302,6 +303,7 @@ config QCOM_CLK_APCS_SDX55
 	tristate "SDX55 and SDX65 APCS Clock Controller"
 	depends on QCOM_APCS_IPC || COMPILE_TEST
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the APCS Clock Controller on SDX55, SDX65 platforms. The
 	  APCS is managing the mux and divider which feeds the CPUs.
@@ -311,6 +313,7 @@ config QCOM_CLK_APCS_SDX55
 config QCOM_CLK_RPM
 	tristate "RPM based Clock Controller"
 	depends on MFD_QCOM_RPM
+	default ARCH_QCOM
 	help
 	  The RPM (Resource Power Manager) is a dedicated hardware engine for
 	  managing the shared SoC resources in order to keep the lowest power
@@ -363,6 +366,7 @@ config APQ_GCC_8084
 	tristate "APQ8084 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on apq8084 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -373,6 +377,7 @@ config APQ_MMCC_8084
 	depends on ARM || COMPILE_TEST
 	select APQ_GCC_8084
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the multimedia clock controller on apq8084 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -424,6 +429,7 @@ config IPQ_CMN_PLL
 config IPQ_GCC_4019
 	tristate "IPQ4019 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on ipq4019 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -478,6 +484,7 @@ config IPQ_GCC_6018
 config IPQ_GCC_806X
 	tristate "IPQ806x Global Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on ipq806x devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -487,6 +494,7 @@ config IPQ_LCC_806X
 	tristate "IPQ806x LPASS Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select IPQ_GCC_806X
+	default ARCH_QCOM
 	help
 	  Support for the LPASS clock controller on ipq806x devices.
 	  Say Y if you want to use audio devices such as i2s, pcm,
@@ -555,6 +563,7 @@ config IPQ_NSSCC_QCA8K
 config MSM_GCC_8660
 	tristate "MSM8660 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on msm8660 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -599,6 +608,7 @@ config MSM_GCC_8939
 config MSM_GCC_8960
 	tristate "APQ8064/MSM8960 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on apq8064/msm8960 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -607,6 +617,7 @@ config MSM_GCC_8960
 config MSM_LCC_8960
 	tristate "APQ8064/MSM8960/MDM9650 LPASS Clock Controller"
 	depends on ARM || COMPILE_TEST
+	default ARCH_QCOM
 	help
 	  Support for the LPASS clock controller on apq8064/msm8960/mdm9650
 	  devices.
@@ -633,6 +644,7 @@ config MSM_MMCC_8960
 	tristate "MSM8960 Multimedia Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select MSM_GCC_8960
+	default ARCH_QCOM
 	help
 	  Support for the multimedia clock controller on msm8960 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -651,6 +663,7 @@ config MSM_GCC_8974
 	tristate "MSM8974 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on msm8974 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -661,6 +674,7 @@ config MSM_MMCC_8974
 	depends on ARM || COMPILE_TEST
 	select MSM_GCC_8974
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the multimedia clock controller on msm8974 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -1234,6 +1248,7 @@ config SDX_GCC_55
 	tristate "SDX55 Global Clock Controller"
 	depends on ARM || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SDX55 devices.
 	  Say Y if you want to use peripheral devices such as UART,

-- 
2.53.0

Re: [PATCH v3 4/7] clk: qcom: Make important ARM32 drivers default

[Konrad Dybcio]

On 7/3/26 12:04 PM, Krzysztof Kozlowski wrote:
> Clock controller drivers are essential for booting up SoCs and are not
> really optional for a given platform.  Kernel should not ask users
> choice of drivers when that choice is obvious and known to the
> developers that answer should be 'yes' or 'module'.
> 
> Switch all Qualcomm clock controller drivers which are chosen in
> ARM 32-bit qcom defconfig to a default 'yes'.
> 
> This has no impact on ARM32 qcom defconfig and ARM64 defconfig
> include/generated/autoconf.h, however enables a few drivers for ARM32
> multi_v7 defconfig: IPQ_GCC_4019, QCOM_CLK_APCS_SDX55, MSM_LCC_8960,
> SDX_GCC_55, QCOM_CLK_RPMH as module, IPQ_GCC_806X, IPQ_LCC_806X and
> QCOM_A7PLL.  Enabling these on multi_v7 is expected to properly boot
> these SoCs with defconfig.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> 
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

[PATCH v3 5/7] clk: qcom: Add defaults for desired arm64 drivers

[Krzysztof Kozlowski]

Clock controller drivers are essential for booting up SoCs and are not
really optional for a given platform.  Kernel should not ask users
choice of drivers when that choice is obvious and known to the
developers that answer should be 'yes' or 'module'.

Enable drivers for upstreamed or being upstreamed SoCs, which are not
yed enabled in defconfig: Glymur, Hawi, Nord, MSM8976, MSM8998 (GPU CC),
SC7180, SC8180X, SC8280XP, SC7280, SDM660, QDU1000, SM4450, SM7150,
SM8150, SM8450, SM6125, SM6375.  Note that main GCC clock controller
drivers are usually already enabled for these.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
Changes in v3:
1. Make builtin SDM_GCC_660 (Konrad)

Changes in v2:
1. Add defaults for: MSM_GCC_8976, MSM_GPUCC_8998, SDM_GCC_660,
   SDM_MMCC_660, SDM_GPUCC_660, HAWI

2. Drop the Konrad RB tag, considering above a significant change.
---
 drivers/clk/qcom/Kconfig | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 11adab354eb1..5b421bee001e 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -73,6 +73,7 @@ config CLK_GLYMUR_GPUCC
 	tristate "GLYMUR Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_GLYMUR_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on GLYMUR devices.
 	  Say Y if you want to support graphics controller devices and
@@ -91,6 +92,7 @@ config CLK_GLYMUR_VIDEOCC
 	tristate "Glymur Video Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select CLK_GLYMUR_GCC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on Glymur devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -161,6 +163,7 @@ config CLK_NORD_GCC
 	tristate "Nord Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on Nord devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -350,6 +353,7 @@ config CLK_HAWI_GCC
 	tristate "Hawi Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on Hawi devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -358,6 +362,7 @@ config CLK_HAWI_GCC
 config CLK_HAWI_TCSRCC
 	tristate "Hawi TCSR Clock Controller"
 	depends on ARM64 || COMPILE_TEST
+	default m if ARCH_QCOM
 	help
 	  Support for the TCSR clock controller on Hawi devices.
 	  Say Y if you want to use peripheral devices such as PCIe, USB, UFS.
@@ -683,6 +688,7 @@ config MSM_MMCC_8974
 config MSM_GCC_8976
 	tristate "MSM8956/76 Global Clock Controller"
 	select QCOM_GDSC
+	default ARCH_QCOM if ARM64
 	help
 	  Support for the global clock controller on msm8956/76 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -738,6 +744,7 @@ config MSM_GPUCC_8998
 	tristate "MSM8998 Graphics Clock Controller"
 	select MSM_GCC_8998
 	select QCOM_GDSC
+	default m if ARCH_QCOM && ARM64
 	help
 	  Support for the graphics clock controller on MSM8998 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -807,6 +814,7 @@ config QCS_GCC_404
 config CLK_NORD_TCSRCC
 	tristate "Nord TCSR Clock Controller"
 	depends on ARM64 || COMPILE_TEST
+	default m if ARCH_QCOM
 	help
 	  Support for the TCSR clock controller on Nord devices.
 	  Say Y if you want to use peripheral devices such as PCIe, USB, UFS etc.
@@ -867,6 +875,7 @@ config SC_CAMCC_7180
 	tristate "SC7180 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
 	  SC7180 devices.
@@ -888,6 +897,7 @@ config SC_CAMCC_8180X
 	tristate "SC8180X Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_8180X
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
 	  SC8180X devices.
@@ -920,6 +930,7 @@ config SC_DISPCC_7180
 	tristate "SC7180 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SC7180 devices.
@@ -1036,6 +1047,7 @@ config SC_GPUCC_7180
 	tristate "SC7180 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SC7180 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1065,6 +1077,7 @@ config SC_LPASSCC_7280
 	tristate "SC7280 Low Power Audio Subsystem (LPASS) Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7280
+	default m if ARCH_QCOM
 	help
 	  Support for the LPASS clock controller on SC7280 devices.
 	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
@@ -1106,6 +1119,7 @@ config SC_VIDEOCC_7180
 	tristate "SC7180 Video Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_7180
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on SC7180 devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -1134,6 +1148,7 @@ config SDM_GCC_660
 	tristate "SDM660 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SDM660 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
@@ -1144,6 +1159,7 @@ config SDM_MMCC_660
 	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_660
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the multimedia clock controller on SDM660 devices.
 	  Say Y if you want to support multimedia devices such as display,
@@ -1154,6 +1170,7 @@ config SDM_GPUCC_660
 	depends on ARM64 || COMPILE_TEST
 	select SDM_GCC_660
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SDM630/636/660 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1187,6 +1204,7 @@ config QDU_ECPRICC_1000
 	tristate "QDU1000/QRU1000 ECPRI Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QDU_GCC_1000
+	default m if ARCH_QCOM
 	help
 	  Support for the ECPRI clock controller on QDU1000 and
 	  QRU1000 devices. Say Y if you want to support the ECPRI
@@ -1276,6 +1294,7 @@ config SM_CAMCC_4450
 	tristate "SM4450 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_4450
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on SM4450 devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -1293,6 +1312,7 @@ config SM_CAMCC_7150
 	tristate "SM7150 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_7150
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on SM7150 devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -1310,6 +1330,7 @@ config SM_CAMCC_8150
 	tristate "SM8150 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8150
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
 	  SM8150 devices.
@@ -1329,6 +1350,7 @@ config SM_CAMCC_8450
 	tristate "SM8450 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8450
+	default m if ARCH_QCOM
 	help
 	  Support for the camera clock controller on SM8450 or SM8475 devices.
 	  Say Y if you want to support camera devices and camera functionality.
@@ -1366,6 +1388,7 @@ config SM_DISPCC_4450
 	tristate "SM4450 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_4450
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SM4450 devices.
@@ -1387,6 +1410,7 @@ config SM_DISPCC_6125
 	tristate "SM6125 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_6125
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SM6125 devices.
@@ -1397,6 +1421,7 @@ config SM_DISPCC_7150
 	tristate "SM7150 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_7150
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SM7150 devices.
@@ -1429,6 +1454,7 @@ config SM_DISPCC_6375
 	tristate "SM6375 Display Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_6375
+	default m if ARCH_QCOM
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
 	  SM6375 devices.
@@ -1504,6 +1530,7 @@ config SM_GCC_6125
 	tristate "SM6125 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM6125 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1523,6 +1550,7 @@ config SM_GCC_6375
 	tristate "SM6375 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM6375 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1532,6 +1560,7 @@ config SM_GCC_7150
 	tristate "SM7150 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
+	default ARCH_QCOM
 	help
 	  Support for the global clock controller on SM7150 devices.
 	  Say Y if you want to use peripheral devices such as UART,
@@ -1622,6 +1651,7 @@ config SM_GPUCC_4450
 	tristate "SM4450 Graphics Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_4450
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM4450 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1641,6 +1671,7 @@ config SM_GPUCC_6125
 	tristate "SM6125 Graphics Clock Controller"
 	select SM_GCC_6125
 	depends on ARM64 || COMPILE_TEST
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM6125 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1650,6 +1681,7 @@ config SM_GPUCC_6375
 	tristate "SM6375 Graphics Clock Controller"
 	select SM_GCC_6375
 	depends on ARM64 || COMPILE_TEST
+	default m if ARCH_QCOM
 	help
 	  Support for the graphics clock controller on SM6375 devices.
 	  Say Y if you want to support graphics controller devices and
@@ -1750,6 +1782,7 @@ config SM_LPASSCC_6115
 	tristate "SM6115 Low Power Audio Subsystem (LPASS) Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_6115
+	default m if ARCH_QCOM
 	help
 	  Support for the LPASS clock controller on SM6115 devices.
 	  Say Y if you want to toggle LPASS-adjacent resets within
@@ -1810,6 +1843,7 @@ config SM_VIDEOCC_7150
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_7150
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on SM7150 devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -1832,6 +1866,7 @@ config SM_VIDEOCC_8150
 	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8150
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on SM8150 devices.
 	  Say Y if you want to support video devices and functionality such as
@@ -1853,6 +1888,7 @@ config SM_VIDEOCC_8350
 	depends on ARM64 || COMPILE_TEST
 	depends on SM_GCC_8350 || SC_GCC_8280XP
 	select QCOM_GDSC
+	default m if ARCH_QCOM
 	help
 	  Support for the video clock controller on SM8350 or SC8280XP devices.
 	  Say Y if you want to support video devices and functionality such as

-- 
2.53.0

[PATCH v3 6/7] ARM/arm64: defconfig: Drop redundant Qualcomm clock entries

[Krzysztof Kozlowski]

Drop all drivers from defconfig which have defaults in Kconfig.  Drop
also MDM_LCC_9615 which is gone since commit bac4675a4d1b ("clk: qcom:
drop lcc-mdm9615 in favour of lcc-msm8960").

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

---

Depends on clock patches - this can wait a cycle.

Changes in v2:
1. New patch (split from previous)
---
 arch/arm/configs/multi_v7_defconfig |   9 ---
 arch/arm/configs/qcom_defconfig     |  14 -----
 arch/arm64/configs/defconfig        | 112 ------------------------------------
 3 files changed, 135 deletions(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 6131cec01b0c..a0067d2280d4 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1100,15 +1100,6 @@ CONFIG_COMMON_CLK_S2MPS11=m
 CONFIG_CLK_TWL=m
 CONFIG_CLK_RASPBERRYPI=y
 CONFIG_COMMON_CLK_QCOM=y
-CONFIG_QCOM_A53PLL=y
-CONFIG_QCOM_CLK_APCS_MSM8916=y
-CONFIG_QCOM_CLK_RPM=y
-CONFIG_QCOM_CLK_SMD_RPM=y
-CONFIG_APQ_MMCC_8084=y
-CONFIG_MSM_GCC_8660=y
-CONFIG_MSM_GCC_8916=y
-CONFIG_MSM_MMCC_8960=y
-CONFIG_MSM_MMCC_8974=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_OMAP=y
 CONFIG_HWSPINLOCK_QCOM=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 03309b89ea4c..5316126fb41e 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -205,20 +205,6 @@ CONFIG_DMADEVICES=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_STAGING=y
 CONFIG_COMMON_CLK_QCOM=y
-CONFIG_QCOM_A7PLL=y
-CONFIG_QCOM_CLK_APCS_SDX55=y
-CONFIG_QCOM_CLK_RPM=y
-CONFIG_QCOM_CLK_SMD_RPM=y
-CONFIG_QCOM_CLK_RPMH=y
-CONFIG_APQ_MMCC_8084=y
-CONFIG_IPQ_GCC_4019=y
-CONFIG_IPQ_LCC_806X=y
-CONFIG_MSM_GCC_8660=y
-CONFIG_MSM_LCC_8960=y
-CONFIG_MDM_LCC_9615=y
-CONFIG_MSM_MMCC_8960=y
-CONFIG_MSM_MMCC_8974=y
-CONFIG_SDX_GCC_55=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_MAILBOX=y
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f2e6ae93e533..c9560f0851b2 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1462,126 +1462,14 @@ CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
 CONFIG_COMMON_CLK_MT8192_VDECSYS=y
 CONFIG_COMMON_CLK_MT8192_VENCSYS=y
 CONFIG_COMMON_CLK_QCOM=y
-CONFIG_CLK_ELIZA_DISPCC=m
-CONFIG_CLK_ELIZA_GCC=y
-CONFIG_CLK_ELIZA_TCSRCC=m
-CONFIG_CLK_GLYMUR_DISPCC=m
-CONFIG_CLK_GLYMUR_GCC=y
-CONFIG_CLK_GLYMUR_TCSRCC=m
-CONFIG_CLK_KAANAPALI_CAMCC=m
-CONFIG_CLK_KAANAPALI_DISPCC=m
-CONFIG_CLK_KAANAPALI_GCC=y
-CONFIG_CLK_KAANAPALI_GPUCC=m
-CONFIG_CLK_KAANAPALI_TCSRCC=m
-CONFIG_CLK_KAANAPALI_VIDEOCC=m
-CONFIG_CLK_X1E80100_CAMCC=m
-CONFIG_CLK_X1E80100_DISPCC=m
-CONFIG_CLK_X1E80100_GCC=y
-CONFIG_CLK_X1E80100_GPUCC=m
-CONFIG_CLK_X1E80100_TCSRCC=y
-CONFIG_CLK_X1P42100_GPUCC=m
-CONFIG_CLK_QCM2290_GPUCC=m
-CONFIG_QCOM_A53PLL=y
-CONFIG_QCOM_CLK_APCS_MSM8916=y
-CONFIG_QCOM_CLK_APCC_MSM8996=y
-CONFIG_QCOM_CLK_SMD_RPM=y
-CONFIG_QCOM_CLK_RPMH=y
-CONFIG_IPQ_APSS_6018=y
-CONFIG_IPQ_CMN_PLL=m
-CONFIG_IPQ_GCC_5018=y
-CONFIG_IPQ_GCC_5210=y
-CONFIG_IPQ_GCC_5332=y
-CONFIG_IPQ_GCC_5424=y
-CONFIG_IPQ_GCC_6018=y
-CONFIG_IPQ_GCC_8074=y
-CONFIG_IPQ_GCC_9574=y
-CONFIG_IPQ_NSSCC_5424=m
-CONFIG_IPQ_NSSCC_9574=m
-CONFIG_MSM_GCC_8916=y
-CONFIG_MSM_GCC_8953=y
-CONFIG_MSM_MMCC_8994=m
-CONFIG_MSM_GCC_8994=y
-CONFIG_MSM_GCC_8996=y
-CONFIG_MSM_MMCC_8996=m
-CONFIG_MSM_GCC_8998=y
-CONFIG_MSM_MMCC_8998=m
-CONFIG_QCM_GCC_2290=y
-CONFIG_QCM_DISPCC_2290=m
-CONFIG_QCS_DISPCC_615=m
-CONFIG_QCS_CAMCC_615=m
-CONFIG_QCS_GCC_404=y
-CONFIG_SA_CAMCC_8775P=m
-CONFIG_QCS_GCC_8300=y
-CONFIG_QCS_GCC_615=y
-CONFIG_QCS_GPUCC_615=m
-CONFIG_QCS_VIDEOCC_615=m
-CONFIG_SC_CAMCC_7280=m
-CONFIG_SC_CAMCC_8280XP=m
-CONFIG_SA_DISPCC_8775P=m
-CONFIG_SC_DISPCC_7280=m
-CONFIG_SC_DISPCC_8280XP=m
-CONFIG_SA_GCC_8775P=y
-CONFIG_SA_GPUCC_8775P=m
-CONFIG_SC_GCC_7180=y
-CONFIG_SC_GCC_7280=y
-CONFIG_SC_GCC_8180X=y
-CONFIG_SC_GCC_8280XP=y
-CONFIG_SC_GPUCC_7280=m
-CONFIG_SC_GPUCC_8280XP=m
-CONFIG_SC_LPASSCC_8280XP=m
-CONFIG_SC_LPASS_CORECC_7280=m
-CONFIG_SC_VIDEOCC_7280=m
-CONFIG_SDM_CAMCC_845=m
-CONFIG_QDU_GCC_1000=y
 CONFIG_SDM_GPUCC_845=y
 CONFIG_SDM_VIDEOCC_845=y
 CONFIG_SDM_DISPCC_845=y
-CONFIG_SDM_LPASSCC_845=m
-CONFIG_SDX_GCC_75=y
-CONFIG_SM_CAMCC_6350=m
-CONFIG_SM_CAMCC_MILOS=m
-CONFIG_SM_CAMCC_8250=m
-CONFIG_SM_CAMCC_8550=m
-CONFIG_SM_CAMCC_8650=m
-CONFIG_SM_CAMCC_8750=m
-CONFIG_SM_DISPCC_6115=m
 CONFIG_SM_DISPCC_8250=y
-CONFIG_SM_DISPCC_6350=m
-CONFIG_SM_DISPCC_MILOS=m
-CONFIG_SM_DISPCC_8450=m
-CONFIG_SM_DISPCC_8550=m
-CONFIG_SM_DISPCC_8750=m
-CONFIG_SM_GCC_4450=y
-CONFIG_SM_GCC_6115=y
-CONFIG_SM_GCC_6350=y
-CONFIG_SM_GCC_MILOS=y
-CONFIG_SM_GCC_8350=y
-CONFIG_SM_GCC_8450=y
-CONFIG_SM_GCC_8550=y
-CONFIG_SM_GCC_8650=y
-CONFIG_SM_GCC_8750=y
-CONFIG_SM_GPUCC_6115=m
-CONFIG_SM_GPUCC_6350=m
-CONFIG_SM_GPUCC_MILOS=m
 CONFIG_SM_GPUCC_8150=y
 CONFIG_SM_GPUCC_8250=y
-CONFIG_SM_GPUCC_8350=m
-CONFIG_SM_GPUCC_8450=m
-CONFIG_SM_GPUCC_8550=m
-CONFIG_SM_GPUCC_8650=m
-CONFIG_SM_GPUCC_8750=m
-CONFIG_SM_TCSRCC_8550=y
-CONFIG_SM_TCSRCC_8650=y
-CONFIG_SM_TCSRCC_8750=m
-CONFIG_SA_VIDEOCC_8775P=m
-CONFIG_SM_VIDEOCC_6350=m
-CONFIG_SM_VIDEOCC_MILOS=m
 CONFIG_SM_VIDEOCC_8250=y
-CONFIG_SM_VIDEOCC_8550=m
-CONFIG_SM_VIDEOCC_8750=m
 CONFIG_QCOM_HFPLL=y
-CONFIG_CLK_GFM_LPASS_SM8250=m
-CONFIG_SM_VIDEOCC_8450=m
 CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
 CONFIG_CLK_RENESAS_VBATTB=m
 CONFIG_EXYNOS_ACPM_CLK=m

-- 
2.53.0

Re: [PATCH v3 6/7] ARM/arm64: defconfig: Drop redundant Qualcomm clock entries

[Konrad Dybcio]

On 7/3/26 12:04 PM, Krzysztof Kozlowski wrote:
> Drop all drivers from defconfig which have defaults in Kconfig.  Drop
> also MDM_LCC_9615 which is gone since commit bac4675a4d1b ("clk: qcom:
> drop lcc-mdm9615 in favour of lcc-msm8960").
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> 
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

[PATCH v3 7/7] arm64: defconfig: Switch Qualcomm SDM845, SM8150 and SM8250 drivers to modules

[Krzysztof Kozlowski]

Display, GPU and video clock controllers on Qualcomm SDM845, SM8150 and
SM8250 SoCs should not be built-in because they are not necessary for
platform bring-up to shell or even mounting rootfs.  Drop their explicit
selection in defconfig, relying on defaults which makes them modules.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
Depends on previous patches.

Changes in v2:
1. Rebase
---
 arch/arm64/configs/defconfig | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c9560f0851b2..386a0ad3fe3d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1462,13 +1462,6 @@ CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
 CONFIG_COMMON_CLK_MT8192_VDECSYS=y
 CONFIG_COMMON_CLK_MT8192_VENCSYS=y
 CONFIG_COMMON_CLK_QCOM=y
-CONFIG_SDM_GPUCC_845=y
-CONFIG_SDM_VIDEOCC_845=y
-CONFIG_SDM_DISPCC_845=y
-CONFIG_SM_DISPCC_8250=y
-CONFIG_SM_GPUCC_8150=y
-CONFIG_SM_GPUCC_8250=y
-CONFIG_SM_VIDEOCC_8250=y
 CONFIG_QCOM_HFPLL=y
 CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
 CONFIG_CLK_RENESAS_VBATTB=m

-- 
2.53.0