From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [v4 PATCH 11/12] ARM: dts: add spi nodes for atmel SoC
Date: Wed, 6 Feb 2013 10:40:49 +0100 [thread overview]
Message-ID: <51122521.2090506@atmel.com> (raw)
In-Reply-To: <B256D81BAE5131468A838E5D7A2436413A086C1E@penmbx02>
On 02/06/2013 02:35 AM, Yang, Wenyou :
>
>
>> -----Original Message-----
>> From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj at jcrosoft.com]
>> Sent: 2013?2?6? 3:51
>> To: Yang, Wenyou
>> Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Ferre,
>> Nicolas; richard.genoud at gmail.com; Lin, JM; linux at arm.linux.org.uk
>> Subject: Re: [v4 PATCH 11/12] ARM: dts: add spi nodes for atmel SoC
>>
>> On 15:34 Mon 14 Jan , Wenyou Yang wrote:
>>> From: Richard Genoud <richard.genoud@gmail.com>
>>>
>>> Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
>>> [wenyou.yang at atmel.com: add spi nodes for sam9260, sam9263, sam9g45
>> and sam9n12]
>>> [wenyou.yang at atmel.com: remove spi property "cs-gpios" to the board dts
>> files]
>>> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
>>> Cc: linux at arm.linux.org.uk
>>> ---
>>> arch/arm/boot/dts/at91sam9260.dtsi | 18 ++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9263.dtsi | 18 ++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9g45.dtsi | 18 ++++++++++++++++++
>> I alreadt have some patch in queue
>>
> Thanks
> I will remove this patch in the next version.
Well, I am not sure:
Jean Christophe, if the patches are in your own queue, I do not see why
this series has to be modified.
The "I already have a patch to address this" type of comment is not a
proper comment:
1/ either you already have submitted the patch (and the new series has
to take it into
account, obviously)
2/ or the patch is not public yet and you now have to deal with this
series posted before
your own one.
There is no a third way...
Best regards,
>>> arch/arm/boot/dts/at91sam9n12.dtsi | 18 ++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9x5.dtsi | 18 ++++++++++++++++++
>>> 5 files changed, 90 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/at91sam9260.dtsi
>> b/arch/arm/boot/dts/at91sam9260.dtsi
>>> index 68bccf4..9586fe1 100644
>>> --- a/arch/arm/boot/dts/at91sam9260.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9260.dtsi
>>> @@ -453,6 +453,24 @@
>>> status = "disabled";
>>> };
>>>
>>> + spi0: spi at fffc8000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9260-spi";
>>> + reg = <0xfffc8000 0x200>;
>>> + interrupts = <12 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi at fffcc000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9260-spi";
>>> + reg = <0xfffcc000 0x200>;
>>> + interrupts = <13 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> adc0: adc at fffe0000 {
>>> compatible = "atmel,at91sam9260-adc";
>>> reg = <0xfffe0000 0x100>;
>>> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi
>> b/arch/arm/boot/dts/at91sam9263.dtsi
>>> index 32ec62c..636b882 100644
>>> --- a/arch/arm/boot/dts/at91sam9263.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9263.dtsi
>>> @@ -426,6 +426,24 @@
>>> reg = <0xfffffd40 0x10>;
>>> status = "disabled";
>>> };
>>> +
>>> + spi0: spi at fffa4000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9260-spi";
>>> + reg = <0xfffa4000 0x200>;
>>> + interrupts = <14 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi at fffa8000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9260-spi";
>>> + reg = <0xfffa8000 0x200>;
>>> + interrupts = <15 4 3>;
>>> + status = "disabled";
>>> + };
>>> };
>>>
>>> nand0: nand at 40000000 {
>>> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi
>> b/arch/arm/boot/dts/at91sam9g45.dtsi
>>> index 231858f..0100b80 100644
>>> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
>>> @@ -495,6 +495,24 @@
>>> reg = <0xfffffd40 0x10>;
>>> status = "disabled";
>>> };
>>> +
>>> + spi0: spi at fffa4000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9g45-spi";
>>> + reg = <0xfffa4000 0x200>;
>>> + interrupts = <14 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi at fffa8000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9g45-spi";
>>> + reg = <0xfffa8000 0x200>;
>>> + interrupts = <15 4 3>;
>>> + status = "disabled";
>>> + };
>>> };
>>>
>>> nand0: nand at 40000000 {
>>> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi
>> b/arch/arm/boot/dts/at91sam9n12.dtsi
>>> index e9efb34..86d5357 100644
>>> --- a/arch/arm/boot/dts/at91sam9n12.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
>>> @@ -355,6 +355,24 @@
>>> #size-cells = <0>;
>>> status = "disabled";
>>> };
>>> +
>>> + spi0: spi at f0000000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9x5-spi";
>>> + reg = <0xf0000000 0x100>;
>>> + interrupts = <13 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi at f0004000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9x5-spi";
>>> + reg = <0xf0004000 0x100>;
>>> + interrupts = <14 4 3>;
>>> + status = "disabled";
>>> + };
>>> };
>>>
>>> nand0: nand at 40000000 {
>>> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi
>> b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> index 40ac3a4..8ea2f7d 100644
>>> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> @@ -473,6 +473,24 @@
>>> trigger-value = <0x6>;
>>> };
>>> };
>>> +
>>> + spi0: spi at f0000000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9x5-spi";
>>> + reg = <0xf0000000 0x100>;
>>> + interrupts = <13 4 3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi at f0004000 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + compatible = "atmel,at91sam9x5-spi";
>>> + reg = <0xf0004000 0x100>;
>>> + interrupts = <14 4 3>;
>>> + status = "disabled";
>>> + };
>>> };
>>>
>>> nand0: nand at 40000000 {
>>> --
>>> 1.7.9.5
>>>
>
> Best Regards,
> Wenyou Yang
>
--
Nicolas Ferre
next prev parent reply other threads:[~2013-02-06 9:40 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-14 7:34 [v4 PATCH 00/12] atmel spi controller with dmaengine and device tree support Wenyou Yang
2013-01-14 7:34 ` [v4 PATCH 01/12] spi/atmel_spi: add physical base address Wenyou Yang
2013-01-14 7:34 ` [v4 PATCH 02/12] spi/atmel_spi: call unmapping on transfers buffers Wenyou Yang
2013-01-14 7:34 ` [v4 PATCH 03/12] spi/atmel_spi: status information passed through controller data Wenyou Yang
2013-01-14 7:34 ` [v4 PATCH 04/12] spi/atmel_spi: add flag to controller data for lock operations Wenyou Yang
2013-01-14 7:34 ` [v4 PATCH 05/12] spi/atmel_spi: update the dt support Wenyou Yang
2013-02-05 20:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-06 1:19 ` Yang, Wenyou
2013-01-14 7:34 ` [v4 PATCH 06/12] spi/atmel_spi: add dmaengine support Wenyou Yang
2013-01-23 16:25 ` Richard Genoud
2013-01-24 0:44 ` Yang, Wenyou
2013-01-14 7:34 ` [v4 PATCH 07/12] spi/atmel_spi: fix spi-atmel driver to adapt to slave_config changes Wenyou Yang
2013-01-14 7:34 ` [v4 PATCH 08/12] spi/atmel_spi: correct 16 bits transfers using PIO Wenyou Yang
2013-01-14 7:34 ` [v4 PATCH 09/12] spi/atmel_spi: correct 16 bits transfer with DMA Wenyou Yang
2013-01-14 7:34 ` [v4 PATCH 10/12] ARM: at91: add clocks for spi dt entries Wenyou Yang
2013-01-14 7:34 ` [v4 PATCH 11/12] ARM: dts: add spi nodes for atmel SoC Wenyou Yang
2013-02-05 19:51 ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-06 1:35 ` Yang, Wenyou
2013-02-06 9:40 ` Nicolas Ferre [this message]
2013-01-14 7:34 ` [v4 PATCH 12/12] ARM: dts: add spi nodes for the atmel boards Wenyou Yang
2013-02-05 19:50 ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-06 1:34 ` Yang, Wenyou
2013-02-08 1:51 ` Yang, Wenyou
2013-02-08 16:55 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-18 8:46 ` [v4 PATCH 00/12] atmel spi controller with dmaengine and device tree support Richard Genoud
2013-01-18 9:31 ` Yang, Wenyou
2013-02-05 14:14 ` Grant Likely
2013-02-05 20:06 ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-06 8:33 ` Yang, Wenyou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51122521.2090506@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox