[PATCH] ARM: dts: exynos: Add bluetooth support to manta

[PATCH] ARM: dts: exynos: Add bluetooth support to manta

[Lukas Timmermann]

Enable the bcm4330-bt device for manta boards on serial0.
Also adds the necessary pin definitions and interrupt handling for
wakeup.

Signed-off-by: Lukas Timmermann <linux@timmermann.space>
Co-developed-by: Alexandre Marquet <tb@a-marquet.fr>
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
---
This patch depends on previous patches which are
currently only found in linux-next.
See: https://lore.kernel.org/all/177214038655.341086.4114348823043257597.b4-ty@kernel.org/
---
 arch/arm/boot/dts/samsung/exynos5250-manta.dts | 41 +++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/samsung/exynos5250-manta.dts b/arch/arm/boot/dts/samsung/exynos5250-manta.dts
index 24a27b342227..76d3657eb22f 100644
--- a/arch/arm/boot/dts/samsung/exynos5250-manta.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-manta.dts
@@ -461,6 +461,13 @@ acc_int: acc-int-pins {
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 	};
 
+	bt_host_wakeup: bt-host-wakeup-pins {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
@@ -488,6 +495,20 @@ bh1721fvc_reset: bh1721fvc-reset-pins {
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
+	bt_reg_on: bt-reg-on-pins {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_wake: bt-wake-pins {
+		samsung,pins = "gph1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
 	msense_reset: msense-reset-pins {
 		samsung,pins = "gpg2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -536,7 +557,25 @@ &sd1_cmd {
 
 /* Bluetooth */
 &serial_0 {
-	status = "disabled";
+	pinctrl-0 = <&uart0_data &uart0_fctl>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+
+		pinctrl-0 = <&bt_reg_on &bt_wake &bt_host_wakeup>;
+		pinctrl-names = "default";
+
+		shutdown-gpios = <&gph0 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gph1 3 GPIO_ACTIVE_HIGH>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
+
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "lpo";
+	};
 };
 
 /* GPS */

---
base-commit: e5f7e05a699f41275d6380c497293446034bc8af
change-id: 20260404-manta-bluetooth-836133028bb6

Best regards,
--  
Lukas Timmermann <linux@timmermann.space>

Re: [PATCH] ARM: dts: exynos: Add bluetooth support to manta

[Krzysztof Kozlowski]

On 08/04/2026 13:56, Lukas Timmermann wrote:
> Enable the bcm4330-bt device for manta boards on serial0.
> Also adds the necessary pin definitions and interrupt handling for
> wakeup.
> 
> Signed-off-by: Lukas Timmermann <linux@timmermann.space>
> Co-developed-by: Alexandre Marquet <tb@a-marquet.fr>
> Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>

Incomplete/incorrect DCO chain. Please do not reorder tags. Git does
them correctly, so you HAD to change them manually.

You send the patch or you apply the patch so you must commit with sign off.

Best regards,
Krzysztof