Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 1/1] pinctrl: imx1: Allow parsing DT without function nodes
@ 2026-05-05 16:09 Frank Li
  2026-05-06 15:05 ` Frank Li
  0 siblings, 1 reply; 2+ messages in thread
From: Frank Li @ 2026-05-05 16:09 UTC (permalink / raw)
  To: Sébastien Szymanski, Dong Aisheng, Fabio Estevam, Frank Li,
	Jacky Bai, Pengutronix Kernel Team, NXP S32 Linux Team,
	Linus Walleij, Sascha Hauer, open list:PIN CONTROLLER - FREESCALE,
	open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	open list
  Cc: imx

The old format to define pinctrl settings for imx in DT has two hierarchy
levels. The first level are function device nodes. The second level are
pingroups which contain a property fsl,pins. The original ntention was to
define all pin functions in a single dtsi file and just reference the
correct ones in the board files.

The commit ("5fcdf6a7ed95e pinctrl: imx: Allow parsing DT without function
nodes") already make moden i.MX chip support flatten layout.

Make legacy chipes (more than 15 years) support this flatten layout also.

Fixes: e948cbdc41d6f ("ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy")
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change in v2
- Add Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
- Use of_property_present()
---
 drivers/pinctrl/freescale/pinctrl-imx1-core.c | 48 ++++++++++++++++---
 1 file changed, 41 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/freescale/pinctrl-imx1-core.c b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
index b36c8a1461b7c..b7bd4ef9c0db5 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx1-core.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
@@ -540,10 +540,34 @@ static int imx1_pinctrl_parse_functions(struct device_node *np,
 	return 0;
 }
 
+/*
+ * Check if the DT contains pins in the direct child nodes. This indicates the
+ * newer DT format to store pins. This function returns true if the first found
+ * fsl,pins property is in a child of np. Otherwise false is returned.
+ */
+static bool imx1_pinctrl_dt_is_flat_functions(struct device_node *np)
+{
+	struct device_node *function_np;
+	struct device_node *pinctrl_np;
+
+	for_each_child_of_node(np, function_np) {
+		if (of_property_present(function_np, "fsl,pins"))
+			return true;
+
+		for_each_child_of_node(function_np, pinctrl_np) {
+			if (of_property_present(pinctrl_np, "fsl,pins"))
+				return false;
+		}
+	}
+
+	return true;
+}
+
 static int imx1_pinctrl_parse_dt(struct platform_device *pdev,
 		struct imx1_pinctrl *pctl, struct imx1_pinctrl_soc_info *info)
 {
 	struct device_node *np = pdev->dev.of_node;
+	bool flat_funcs;
 	int ret;
 	u32 nfuncs = 0;
 	u32 ngroups = 0;
@@ -552,9 +576,15 @@ static int imx1_pinctrl_parse_dt(struct platform_device *pdev,
 	if (!np)
 		return -ENODEV;
 
-	for_each_child_of_node_scoped(np, child) {
-		++nfuncs;
-		ngroups += of_get_child_count(child);
+	flat_funcs = imx1_pinctrl_dt_is_flat_functions(np);
+	if (flat_funcs) {
+		nfuncs = 1;
+		ngroups = of_get_child_count(np);
+	} else {
+		for_each_child_of_node_scoped(np, child) {
+			++nfuncs;
+			ngroups += of_get_child_count(child);
+		}
 	}
 
 	if (!nfuncs) {
@@ -574,10 +604,14 @@ static int imx1_pinctrl_parse_dt(struct platform_device *pdev,
 	if (!info->functions || !info->groups)
 		return -ENOMEM;
 
-	for_each_child_of_node_scoped(np, child) {
-		ret = imx1_pinctrl_parse_functions(child, info, ifunc++);
-		if (ret == -ENOMEM)
-			return -ENOMEM;
+	if (flat_funcs) {
+		imx1_pinctrl_parse_functions(np, info, 0);
+	} else {
+		for_each_child_of_node_scoped(np, child) {
+			ret = imx1_pinctrl_parse_functions(child, info, ifunc++);
+			if (ret == -ENOMEM)
+				return -ENOMEM;
+		}
 	}
 
 	return 0;
-- 
2.43.0



^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH v2 1/1] pinctrl: imx1: Allow parsing DT without function nodes
  2026-05-05 16:09 [PATCH v2 1/1] pinctrl: imx1: Allow parsing DT without function nodes Frank Li
@ 2026-05-06 15:05 ` Frank Li
  0 siblings, 0 replies; 2+ messages in thread
From: Frank Li @ 2026-05-06 15:05 UTC (permalink / raw)
  To: Sébastien Szymanski, Dong Aisheng, Fabio Estevam, Jacky Bai,
	Pengutronix Kernel Team, NXP S32 Linux Team, Linus Walleij,
	Sascha Hauer, open list:PIN CONTROLLER - FREESCALE,
	open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	open list

On Tue, May 05, 2026 at 12:09:02PM -0400, Frank Li wrote:
> The old format to define pinctrl settings for imx in DT has two hierarchy
> levels. The first level are function device nodes. The second level are
> pingroups which contain a property fsl,pins. The original ntention was to
> define all pin functions in a single dtsi file and just reference the
> correct ones in the board files.
>
> The commit ("5fcdf6a7ed95e pinctrl: imx: Allow parsing DT without function
> nodes") already make moden i.MX chip support flatten layout.
>
> Make legacy chipes (more than 15 years) support this flatten layout also.

Linus Walleij:

	Commit message missed an important information.

	This is fix v7.1 i.mx27 boot regression. Although it is old chip,
it'd better to get merged in v7.1 fix cycle.

Frank

>
> Fixes: e948cbdc41d6f ("ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy")
> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> Change in v2
> - Add Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> - Use of_property_present()
> ---
>  drivers/pinctrl/freescale/pinctrl-imx1-core.c | 48 ++++++++++++++++---
>  1 file changed, 41 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pinctrl/freescale/pinctrl-imx1-core.c b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
> index b36c8a1461b7c..b7bd4ef9c0db5 100644
> --- a/drivers/pinctrl/freescale/pinctrl-imx1-core.c
> +++ b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
> @@ -540,10 +540,34 @@ static int imx1_pinctrl_parse_functions(struct device_node *np,
>  	return 0;
>  }
>
> +/*
> + * Check if the DT contains pins in the direct child nodes. This indicates the
> + * newer DT format to store pins. This function returns true if the first found
> + * fsl,pins property is in a child of np. Otherwise false is returned.
> + */
> +static bool imx1_pinctrl_dt_is_flat_functions(struct device_node *np)
> +{
> +	struct device_node *function_np;
> +	struct device_node *pinctrl_np;
> +
> +	for_each_child_of_node(np, function_np) {
> +		if (of_property_present(function_np, "fsl,pins"))
> +			return true;
> +
> +		for_each_child_of_node(function_np, pinctrl_np) {
> +			if (of_property_present(pinctrl_np, "fsl,pins"))
> +				return false;
> +		}
> +	}
> +
> +	return true;
> +}
> +
>  static int imx1_pinctrl_parse_dt(struct platform_device *pdev,
>  		struct imx1_pinctrl *pctl, struct imx1_pinctrl_soc_info *info)
>  {
>  	struct device_node *np = pdev->dev.of_node;
> +	bool flat_funcs;
>  	int ret;
>  	u32 nfuncs = 0;
>  	u32 ngroups = 0;
> @@ -552,9 +576,15 @@ static int imx1_pinctrl_parse_dt(struct platform_device *pdev,
>  	if (!np)
>  		return -ENODEV;
>
> -	for_each_child_of_node_scoped(np, child) {
> -		++nfuncs;
> -		ngroups += of_get_child_count(child);
> +	flat_funcs = imx1_pinctrl_dt_is_flat_functions(np);
> +	if (flat_funcs) {
> +		nfuncs = 1;
> +		ngroups = of_get_child_count(np);
> +	} else {
> +		for_each_child_of_node_scoped(np, child) {
> +			++nfuncs;
> +			ngroups += of_get_child_count(child);
> +		}
>  	}
>
>  	if (!nfuncs) {
> @@ -574,10 +604,14 @@ static int imx1_pinctrl_parse_dt(struct platform_device *pdev,
>  	if (!info->functions || !info->groups)
>  		return -ENOMEM;
>
> -	for_each_child_of_node_scoped(np, child) {
> -		ret = imx1_pinctrl_parse_functions(child, info, ifunc++);
> -		if (ret == -ENOMEM)
> -			return -ENOMEM;
> +	if (flat_funcs) {
> +		imx1_pinctrl_parse_functions(np, info, 0);
> +	} else {
> +		for_each_child_of_node_scoped(np, child) {
> +			ret = imx1_pinctrl_parse_functions(child, info, ifunc++);
> +			if (ret == -ENOMEM)
> +				return -ENOMEM;
> +		}
>  	}
>
>  	return 0;
> --
> 2.43.0
>


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2026-05-06 15:06 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-05-05 16:09 [PATCH v2 1/1] pinctrl: imx1: Allow parsing DT without function nodes Frank Li
2026-05-06 15:05 ` Frank Li

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox