public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Meghana Malladi <m-malladi@ti.com>,
	vigneshr@ti.com, horms@kernel.org, jan.kiszka@siemens.com,
	diogo.ivo@siemens.com, pabeni@redhat.com, kuba@kernel.org,
	edumazet@google.com, davem@davemloft.net, andrew+netdev@lunn.ch
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, srk@ti.com,
	Roger Quadros <rogerq@kernel.org>,
	danishanwar@ti.com
Subject: Re: [PATCH net v2] net: ti: icssg-prueth: Fix 1 PPS sync
Date: Thu, 24 Oct 2024 14:16:30 +0100	[thread overview]
Message-ID: <ff454a9b-5e60-49cb-8590-a2535f851057@linux.dev> (raw)
In-Reply-To: <20241024113140.973928-1-m-malladi@ti.com>

On 24/10/2024 12:31, Meghana Malladi wrote:
> The first PPS latch time needs to be calculated by the driver
> (in rounded off seconds) and configured as the start time
> offset for the cycle. After synchronizing two PTP clocks
> running as master/slave, missing this would cause master
> and slave to start immediately with some milliseconds
> drift which causes the PPS signal to never synchronize with
> the PTP master.
> 
> Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support")
> Signed-off-by: Meghana Malladi <m-malladi@ti.com>
> ---
> 
> Hello,
> 
> This patch is based on net-next tagged next-20241023.
> v1:https://lore.kernel.org/all/20241023091213.593351-1-m-malladi@ti.com/
> Changes since v1 (v2-v1):
> - Use roundup() instead of open coding as suggested by Vadim Fedorenko
> 
> Regards,
> Meghana.
> 
>   drivers/net/ethernet/ti/icssg/icssg_prueth.c | 12 ++++++++++--
>   drivers/net/ethernet/ti/icssg/icssg_prueth.h | 11 +++++++++++
>   2 files changed, 21 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> index 0556910938fa..6876e8181066 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> @@ -411,6 +411,8 @@ static int prueth_perout_enable(void *clockops_data,
>   	struct prueth_emac *emac = clockops_data;
>   	u32 reduction_factor = 0, offset = 0;
>   	struct timespec64 ts;
> +	u64 current_cycle;
> +	u64 start_offset;
>   	u64 ns_period;
>   
>   	if (!on)
> @@ -449,8 +451,14 @@ static int prueth_perout_enable(void *clockops_data,
>   	writel(reduction_factor, emac->prueth->shram.va +
>   		TIMESYNC_FW_WC_SYNCOUT_REDUCTION_FACTOR_OFFSET);
>   
> -	writel(0, emac->prueth->shram.va +
> -		TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET);
> +	current_cycle = icssg_readq(emac->prueth->shram.va +
> +				    TIMESYNC_FW_WC_CYCLECOUNT_OFFSET);
> +
> +	/* Rounding of current_cycle count to next second */
> +	start_offset = roundup(current_cycle, MSEC_PER_SEC);
> +
> +	icssg_writeq(start_offset, emac->prueth->shram.va +
> +		     TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET);
>   
>   	return 0;
>   }
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> index 8722bb4a268a..a4af2dbcca31 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> @@ -330,6 +330,17 @@ static inline int prueth_emac_slice(struct prueth_emac *emac)
>   extern const struct ethtool_ops icssg_ethtool_ops;
>   extern const struct dev_pm_ops prueth_dev_pm_ops;
>   
> +static inline u64 icssg_readq(const void __iomem *addr)
> +{
> +	return readl(addr) + ((u64)readl(addr + 4) << 32);
> +}
> +
> +static inline void icssg_writeq(u64 val, void __iomem *addr)
> +{
> +	writel(lower_32_bits(val), addr);
> +	writel(upper_32_bits(val), addr + 4);
> +}
> +
>   /* Classifier helpers */
>   void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac);
>   void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac);
> 
> base-commit: 73840ca5ef361f143b89edd5368a1aa8c2979241

Thanks,

Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>


  reply	other threads:[~2024-10-24 13:18 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-24 11:31 [PATCH net v2] net: ti: icssg-prueth: Fix 1 PPS sync Meghana Malladi
2024-10-24 13:16 ` Vadim Fedorenko [this message]
2024-10-24 13:33 ` Anwar, Md Danish
2024-10-24 19:55 ` Andrew Lunn
2024-10-25  5:47   ` Meghana Malladi
2024-10-25 13:22     ` Andrew Lunn
2024-10-28 11:05       ` Meghana Malladi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ff454a9b-5e60-49cb-8590-a2535f851057@linux.dev \
    --to=vadim.fedorenko@linux.dev \
    --cc=andrew+netdev@lunn.ch \
    --cc=danishanwar@ti.com \
    --cc=davem@davemloft.net \
    --cc=diogo.ivo@siemens.com \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=jan.kiszka@siemens.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m-malladi@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=rogerq@kernel.org \
    --cc=srk@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox