* [PATCH 03/12] arm64: dts: r8a7795: salvator-x: Add DU LVDS output endpoint
From: Simon Horman @ 2016-11-04 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478251192.git.horms+renesas@verge.net.au>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Declaring the endpoint makes LVDS enablement easier by just including
the corresponding panel's dtsi file.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index ff4e4fe843ed..c8f6023c4667 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -191,6 +191,10 @@
remote-endpoint = <&adv7123_in>;
};
};
+ port at 3 {
+ lvds_connector: endpoint {
+ };
+ };
};
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 02/12] arm64: dts: r8a7796: salvator-x: Populate EXTALR
From: Simon Horman @ 2016-11-04 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478251192.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
It can be used for the watchdog.
Based on similar work for r8a7795/salvator-x by Wolfram Sang.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index 13db7d61c26c..90e9a76c8b30 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -49,6 +49,10 @@
clock-frequency = <16666666>;
};
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 01/12] arm64: dts: r8a7795: salvator-x: enable UHS for SDHI 0 & 3
From: Simon Horman @ 2016-11-04 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478251192.git.horms+renesas@verge.net.au>
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index b1eab6876f8c..ff4e4fe843ed 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -237,11 +237,25 @@
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
};
sdhi3_pins: sd3 {
groups = "sdhi3_data4", "sdhi3_ctrl";
function = "sdhi3";
+ power-source = <3300>;
+ };
+
+ sdhi3_pins_uhs: sd3_uhs {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <1800>;
};
sound_pins: sound {
@@ -371,25 +385,29 @@
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
+ sd-uhs-sdr50;
status = "okay";
};
&sdhi3 {
pinctrl-0 = <&sdhi3_pins>;
- pinctrl-names = "default";
+ pinctrl-1 = <&sdhi3_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi3>;
vqmmc-supply = <&vccq_sdhi3>;
cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
+ sd-uhs-sdr50;
status = "okay";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [RFC PATCH 1/3] ARM64: meson: Add Amlogic Meson GX PM Suspend
From: Neil Armstrong @ 2016-11-04 9:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161103215347.GA23902@e106835-lin.cambridge.arm.com>
On 11/03/2016 10:53 PM, Sudeep Holla wrote:
>
> Short response to this patch: NAK
>
> To be constructive, since this system lacks PSCI system suspend, it just
> can't support. Alternatively, this can be normal cpuidle state and you
> can use suspend to idle to achieve the same and you need not hack/work
> around using platform specific driver.
>
> --
> Regards,
> Sudeep
>
Hi Mark, Sudeep,
Thanks for your replies.
First of all, I never intended to have this patchset Acked, I certainly know this is a bad hack !
But, in the current Linux PSCI implementation, there is no way to handle System Suspend when the
SoC FW implements PSCI 0.2, except idle-to-suspend which is quite different since the FW does not handle the wakeup.
Don't worry, I'll prefer Amlogic to conform to PSCI 1.0, but like the SCPI, the GXBB was implemented
using an early version of these FW protocols... and the SoC is here and should be supported somehow.
I have a simple question : Could it be possible to declare an idle-state to be used exclusively by suspend-to-mem ?
For example while parsing the idle-states, if we encounter a particular property, the we save the state, don't
add it to the cpuidle states and register a platform_suspend_ops using this state.
Would it be accepted to be able to select a declared DT idle-state and reserve it to suspend-to-mem state ?
In the Amlogic case, their CPU_SUSPEND is partially conform, but since the power_state parameter was left as
implementation defined, they added a deeper cluster sleep state.
But potentially, we could need to handle system suspend on PSCI0.2 systems using a particular idle-state ?
Yes, Sudeep mentioned suspend-to-idle, but in our tests the kernel enters each idle-state at boot time and when
we declare this deep sleep idle state, it makes the whole system enter this system suspend state.
Neil
^ permalink raw reply
* [PATCH v2] ARM: DTS: r8a7794: alt: Fix PFC names for DU
From: Simon Horman @ 2016-11-04 9:02 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478201686-25488-1-git-send-email-jacopo@jmondi.org>
Hi,
On Thu, Nov 03, 2016 at 08:34:46PM +0100, Jacopo Mondi wrote:
> Update the PFC pin groups and function names of DU interface for
> r8a7794 ALT board.
>
> The currently specified pin groups and function names prevented PFC and
> DU interfaces from being correctly configured:
>
> sh-pfc e6060000.pin-controller: function 'du' not supported
> sh-pfc e6060000.pin-controller: invalid function du in map table
> sh-pfc e6060000.pin-controller: function 'du' not supported
> sh-pfc e6060000.pin-controller: invalid function du in map table
> sh-pfc e6060000.pin-controller: function 'du' not supported
> sh-pfc e6060000.pin-controller: invalid function du in map table
> sh-pfc e6060000.pin-controller: function 'du' not supported
> sh-pfc e6060000.pin-controller: invalid function du in map table
> rcar-du: probe of feb00000.display failed with error -22
>
> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
> ---
>
> v1->v2:
> - s/PCF/PFC/ in commit message according to Sergei Shtylyov's comment
>
> Patch applied against Simon Horman's renesas/master branch.
> The PCF pin groups and function renaming was introduced by commit 56ed4bb9 and
> DTS for ALT board has never been update accordingly.
> Tested displaying frames on VGA interface: the rcar-du driver loads correctly.
Thanks for noticing this.
There is no need to repost to update the subject, but for reference I would
prefer the prefix to be "ARM: dts: alt:". Assuming there are no other
changes I can fix that up when queuing up this change.
I am wondering if this should be queued up as a fix for v4.9 and in turn
v4.8-stable. Or if it should just be queued up for v4.10.
In the case of the former I'd advocate adding the following tag
(again no need to repost just to update this):
Fixes: 56ed4bb984ac ("pinctrl: sh-pfc: r8a7794: Add DU pin groups")
> arch/arm/boot/dts/r8a7794-alt.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
> index 8d1b35a..9d65fb3 100644
> --- a/arch/arm/boot/dts/r8a7794-alt.dts
> +++ b/arch/arm/boot/dts/r8a7794-alt.dts
> @@ -165,8 +165,8 @@
> pinctrl-names = "default";
>
> du_pins: du {
> - groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
> - function = "du";
> + groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
> + function = "du1";
> };
>
> scif2_pins: scif2 {
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply
* [PATCH] MAINTAINERS: Update Broadcom Vulcan maintainer email
From: Jayachandran C @ 2016-11-04 8:54 UTC (permalink / raw)
To: linux-arm-kernel
Update Broadcom Vulcan maintainer's email address, the broadcom.com
address is no longer valid.
Signed-off-by: Jayachandran C <c.jayachandran@gmail.com>
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d838cf..8bb97e2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2753,7 +2753,7 @@ S: Supported
F: drivers/net/ethernet/broadcom/bcmsysport.*
BROADCOM VULCAN ARM64 SOC
-M: Jayachandran C. <jchandra@broadcom.com>
+M: Jayachandran C. <c.jayachandran@gmail.com>
M: bcm-kernel-feedback-list at broadcom.com
L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
S: Maintained
--
2.7.4
^ permalink raw reply related
* [PATCH 2/2] ARM: dts: stm32f429: Add QSPI clock
From: gabriel.fernandez at st.com @ 2016-11-04 8:52 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478249577-25999-1-git-send-email-gabriel.fernandez@st.com>
From: Gabriel Fernandez <gabriel.fernandez@st.com>
This patch adds the QSPI clock for stm32f469 discovery board.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
arch/arm/boot/dts/stm32f469-disco.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index e911af8..c43a484 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -66,6 +66,10 @@
};
};
+&rcc {
+ compatible = "st,stm32f469-rcc", "st,stm32f42xx-rcc", "st,stm32-rcc";
+};
+
&clk_hse {
clock-frequency = <8000000>;
};
--
1.9.1
^ permalink raw reply related
* [PATCH 1/2] ARM: dts: stm32f429: add LSI and LSE clocks
From: gabriel.fernandez at st.com @ 2016-11-04 8:52 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478249577-25999-1-git-send-email-gabriel.fernandez@st.com>
From: Gabriel Fernandez <gabriel.fernandez@st.com>
This patch adds lsi / lse oscillators. These clocks can be use by
RTC clocks.
The clock drivers needs to disable the power domain write protection using
syscon / regmap to enable these clocks.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
arch/arm/boot/dts/stm32f429.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 336ee4f..2700449 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -56,6 +56,18 @@
compatible = "fixed-clock";
clock-frequency = <0>;
};
+
+ clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
};
soc {
@@ -185,6 +197,11 @@
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
};
+ pwrcfg: power-config at 40007000 {
+ compatible = "syscon";
+ reg = <0x40007000 0x400>;
+ };
+
pin-controller {
#address-cells = <1>;
#size-cells = <1>;
@@ -340,6 +357,7 @@
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
reg = <0x40023800 0x400>;
clocks = <&clk_hse>;
+ st,syscfg = <&pwrcfg>;
};
dma1: dma-controller at 40026000 {
--
1.9.1
^ permalink raw reply related
* [PATCH 0/2] STM32F4 Enable RTC & QSPI clocks
From: gabriel.fernandez at st.com @ 2016-11-04 8:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Gabriel Fernandez <gabriel.fernandez@st.com>
This patch-set enables RTC & QSPI clocks.
Gabriel Fernandez (2):
ARM: dts: stm32f429: add LSI and LSE clocks
ARM: dts: stm32f429: Add QSPI clock
arch/arm/boot/dts/stm32f429.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/stm32f469-disco.dts | 4 ++++
2 files changed, 22 insertions(+)
--
1.9.1
^ permalink raw reply
* arm64 build failure with CONFIG_ARM64_LSE_ATOMICS=y
From: Artem Savkov @ 2016-11-04 8:35 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161103184624.GA695@e104818-lin.cambridge.arm.com>
On Thu, Nov 03, 2016 at 06:46:25PM +0000, Catalin Marinas wrote:
> On Thu, Nov 03, 2016 at 12:12:38PM +0100, Artem Savkov wrote:
> > On Thu, Nov 03, 2016 at 10:39:43AM +0000, Suzuki K Poulose wrote:
> > > On 02/11/16 23:28, Will Deacon wrote:
> > > > On Wed, Nov 02, 2016 at 05:44:27PM +0100, Artem Savkov wrote:
> > > > > Looks like your patch "efd9e03 arm64: Use static keys for CPU features"
> > > > > breaks arm64 build with "CONFIG_ARM64_LSE_ATOMICS=y" because it creates a
> > > > > circular dependency for asm/lse.h through jump_label.h:
> [...]
> > Apparently it fails with an older gcc (4.8.5), but doesn't with 6.2.0.
> > The different bit is that with 4.8.5 I don't have CC_HAVE_ASM_GOTO set.
> > It is reproducible with 6.2.0 if you manually remove CC_HAVE_ASM_GOTO.
>
> -----------8<----------------
> From e27eb40cd5af38f1a5e64553a367220f00a1b5d8 Mon Sep 17 00:00:00 2001
> From: Catalin Marinas <catalin.marinas@arm.com>
> Date: Thu, 3 Nov 2016 18:34:34 +0000
> Subject: [PATCH] arm64: Fix circular include of asm/lse.h through
> linux/jump_label.h
>
> Commit efd9e03facd0 ("arm64: Use static keys for CPU features")
> introduced support for static keys in asm/cpufeature.h, including
> linux/jump_label.h. When CC_HAVE_ASM_GOTO is not defined, this causes a
> circular dependency via linux/atomic.h, asm/lse.h and asm/cpufeature.h.
>
> This patch moves the capability macros out out of asm/cpufeature.h into
> a separate asm/cpucaps.h and modifies some of the #includes accordingly.
>
> Fixes: efd9e03facd0 ("arm64: Use static keys for CPU features")
> Reported-by: Artem Savkov <asavkov@redhat.com>
> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
> ---
> arch/arm64/include/asm/alternative.h | 2 +-
> arch/arm64/include/asm/cpucaps.h | 40 ++++++++++++++++++++++++++++++++++++
> arch/arm64/include/asm/cpufeature.h | 20 +-----------------
> arch/arm64/include/asm/lse.h | 1 -
> 4 files changed, 42 insertions(+), 21 deletions(-)
> create mode 100644 arch/arm64/include/asm/cpucaps.h
Tested-by: Artem Savkov <asavkov@redhat.com>
The patch fixes the issue. Thanks.
--
Regards,
Artem
^ permalink raw reply
* [PATCH v2 13/14] ARM: dts: sun6i: hummingbird: Enable internal audio codec
From: Chen-Yu Tsai @ 2016-11-04 8:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161103084543.m4zvwhscpaa3y5ay@lukather>
On Thu, Nov 3, 2016 at 4:45 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Thu, Nov 03, 2016 at 03:55:55PM +0800, Chen-Yu Tsai wrote:
>> The Hummingbird A31 has headset and line in audio jacks and an onboard
>> mic routed to the pins for the SoC's internal codec. The line out pins
>> are routed to an onboard speaker amp, whose output is available on a
>> pin header.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>> arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 20 ++++++++++++++++++++
>> 1 file changed, 20 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
>> index 9a74637f677f..48c041b75aab 100644
>> --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
>> +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
>> @@ -69,6 +69,19 @@
>> };
>> };
>>
>> +&codec {
>> + allwinner,audio-routing =
>> + "Headphone", "HP",
>> + "Speaker", "LINEOUT",
>> + "LINEIN", "Line In",
>> + "MIC1", "Mic",
>> + "MIC2", "Headset Mic",
>> + "Mic", "MBIAS",
>> + "Headset Mic", "HBIAS";
>> + allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
>> + status = "okay";
>> +};
>> +
>> &cpu0 {
>> cpu-supply = <®_dcdc3>;
>> };
>> @@ -152,6 +165,13 @@
>> };
>>
>> &pio {
>> + codec_pa_pin: codec_pa_pin at 0 {
>> + allwinner,pins = "PH22";
>> + allwinner,function = "gpio_out";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>
> This pin group isn't used anywhere. Because of the strict thing in
> pinctrl, I'd say it's better to not set it, but then, the pin group is
> useless.
I'll drop the pinmux setting then.
ChenYu
^ permalink raw reply
* [PATCH 4/6] ARM: dts: add basic support for Rockchip RK1108 SOC
From: Heiko Stuebner @ 2016-11-04 8:07 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478176848-12132-1-git-send-email-andy.yan@rock-chips.com>
Am Donnerstag, 3. November 2016, 20:40:48 CET schrieb Andy Yan:
> RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
> It is designed for varies application scenario such as car DVR, sports
> DV, secure camera and UAV camera.
>
> This patch add basic support for it with DMAC / UART / CRU / pinctrl
> enabled.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>
> arch/arm/boot/dts/rk1108.dtsi | 420
> ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-rockchip/rockchip.c |
> 1 +
> 2 files changed, 421 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk1108.dtsi
>
> diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
> new file mode 100644
> index 0000000..9dccfea
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk1108.dtsi
[...]
> + pinctrl: pinctrl {
> + compatible = "rockchip,rk1108-pinctrl";
> + rockchip,grf = <&grf>;
missing rockchip,pmu phandle for gpio0 iomuxes and also syscon declaration for
said pmugrf syscon in this file.
Heiko
^ permalink raw reply
* [PATCH 5/6] ARM: add low level debug uart for rk1108
From: Heiko Stuebner @ 2016-11-04 8:03 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <56bcae77-3aed-c183-5e9f-3581cc187a7d@rock-chips.com>
Am Freitag, 4. November 2016, 15:58:35 CET schrieb Andy Yan:
> Hi Heiko:
>
> On 2016?11?04? 15:36, Heiko Stuebner wrote:
> > Am Donnerstag, 3. November 2016, 20:42:21 CET schrieb Andy Yan:
> >> RK1108 UARTs are Synopsis DesignWare 8250 compatible.
> >> Only with different register addresses.
> >>
> >> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> >> ---
> >>
> >> arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++++
> >> 1 file changed, 30 insertions(+)
> >>
> >> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> >> index d83f7c3..408540f 100644
> >> --- a/arch/arm/Kconfig.debug
> >> +++ b/arch/arm/Kconfig.debug
> >> @@ -776,6 +776,30 @@ choice
> >>
> >> their output to the standard serial port on the RealView
> >> PB1176 platform.
> >>
> >> + config DEBUG_RK1108_UART0
> >> + bool "Kernel low-level debugging messages via Rockchip RK1108
UART0"
> >> + depends on ARCH_ROCKCHIP
> >> + select DEBUG_UART_8250
> >> + help
> >> + Say Y here if you want kernel low-level debugging support
> >> + on Rockchip RK1108 based platforms.
> >> +
> >> + config DEBUG_RK1108_UART1
> >> + bool "Kernel low-level debugging messages via Rockchip RK1108
UART1"
> >> + depends on ARCH_ROCKCHIP
> >> + select DEBUG_UART_8250
> >> + help
> >> + Say Y here if you want kernel low-level debugging support
> >> + on Rockchip RK1108 based platforms.
> >> +
> >> + config DEBUG_RK1108_UART2
> >> + bool "Kernel low-level debugging messages via Rockchip RK1108
UART2"
> >> + depends on ARCH_ROCKCHIP
> >> + select DEBUG_UART_8250
> >> + help
> >> + Say Y here if you want kernel low-level debugging support
> >> + on Rockchip RK1108 based platforms.
> >> +
> >
> > are you sure, you need all 3 of them?
> >
> > I.e. most Rockchip SoCs so far had one uart somewhat designated as debug
> > uart. Most likely due to it not having rts/cts and being used in
> > reference schematics, but no one ever used another uart than uart2 on
> > previous socs. So ideally we could check and only add uarts we actually
> > need for now. More can be added later anyway once boards try to use them.
> >
> >
> > Heiko
>
> Actually, I have two boards on my hand, one uses uart0 as debug
> port and the another uses uart2, so I add all of them here.
ok, then this is fine.
> I have a question here, I not very clear how to get the
> DEBUG_UART_VIRT value here, I now set the value I got from uart driver
> and it works , is there some rule or method to calculate this
> DEBUG_UART_VIRT value on different platform?
I don't really know. When I added the old uarts, I always just took the value
from the vendor-kernel :-) .
In any case, arm32 now also supports earlycon (like arm64) not needing the
bootloader setup of the uart. The one thing debug_ll can do that earlycon
cannot is outputting stuff from the kernel decompressor.
Heiko
^ permalink raw reply
* [PATCH 4/6] ARM: dts: add basic support for Rockchip RK1108 SOC
From: Heiko Stuebner @ 2016-11-04 8:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478176848-12132-1-git-send-email-andy.yan@rock-chips.com>
Am Donnerstag, 3. November 2016, 20:40:48 CET schrieb Andy Yan:
> RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
> It is designed for varies application scenario such as car DVR, sports
> DV, secure camera and UAV camera.
>
> This patch add basic support for it with DMAC / UART / CRU / pinctrl
> enabled.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>
> arch/arm/boot/dts/rk1108.dtsi | 420
> ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-rockchip/rockchip.c |
> 1 +
> 2 files changed, 421 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk1108.dtsi
>
> diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
> new file mode 100644
> index 0000000..9dccfea
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk1108.dtsi
> @@ -0,0 +1,420 @@
> +/*
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/rk1108-cru.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + compatible = "rockchip,rk1108";
> +
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at f00 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0xf00>;
> + };
> +
unnecessary empty line
> + };
> +
> + amba {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + pdma: pdma at 102a0000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x102a0000 0x4000>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + arm,pl330-broken-no-flushp;
> + clocks = <&cru ACLK_DMAC>;
> + clock-names = "apb_pclk";
> + };
> + };
> +
> + arm-pmu {
> + compatible = "arm,cortex-a7-pmu";
> + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
CPU_MASK_SIMPLE(4)? You only have one core, not 4.
> + clock-frequency = <24000000>;
> + };
> +
> + xin24m: oscillator {
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "xin24m";
> + #clock-cells = <0>;
> + };
> +
> + bus_intmem at 10080000 {
> + compatible = "mmio-sram";
> + reg = <0x10080000 0x2000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x10080000 0x2000>;
> + };
> +
> + grf: syscon at 10300000 {
> + compatible = "rockchip,rk1108-grf", "syscon";
> + reg = <0x10300000 0x1000>;
> + };
> +
> + emmc: dwmmc at 30110000 {
> + compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
> + clock-freq-min-max = <400000 150000000>;
> + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
> + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + fifo-depth = <0x100>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x30110000 0x4000>;
> + status = "disabled";
> + };
> +
> + sdio: dwmmc at 30120000 {
> + compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
> + clock-freq-min-max = <400000 150000000>;
> + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
> + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + fifo-depth = <0x100>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x30120000 0x4000>;
> + status = "disabled";
> + };
> +
> + sdmmc: dwmmc at 30130000 {
ordering by register address please (uart2 before sdmmc etc; same for
everything else)
> + compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
> + clock-freq-min-max = <400000 100000000>;
> + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
> + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
> + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + fifo-depth = <0x100>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x30130000 0x4000>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 10210000 {
> + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
> + reg = <0x10210000 0x100>;
> + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <24000000>;
> + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
> + clock-names = "baudclk", "apb_pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2m0_xfer>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 10220000 {
> + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
> + reg = <0x10220000 0x100>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <24000000>;
> + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
> + clock-names = "baudclk", "apb_pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_xfer>;
> + status = "disabled";
> + };
> +
> + uart0: serial at 10230000 {
> + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
> + reg = <0x10230000 0x100>;
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <24000000>;
> + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
> + clock-names = "baudclk", "apb_pclk";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> + status = "disabled";
> + };
> +
> + cru: clock-controller at 20200000 {
> + compatible = "rockchip,rk1108-cru";
> + reg = <0x20200000 0x1000>;
> + rockchip,grf = <&grf>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + gic: interrupt-controller at 32010000 {
> + compatible = "arm,cortex-a15-gic";
compatible = "arm,gic-400"; ?
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> +
> + reg = <0x32011000 0x1000>,
> + <0x32012000 0x1000>;
please provide all 4 register areas and also the interrupt (
> + };
> +
[...]
> diff --git a/arch/arm/mach-rockchip/rockchip.c
> b/arch/arm/mach-rockchip/rockchip.c index a7ab9ec..e7fdf06 100644
> --- a/arch/arm/mach-rockchip/rockchip.c
> +++ b/arch/arm/mach-rockchip/rockchip.c
> @@ -76,6 +76,7 @@ static void __init rockchip_dt_init(void)
> }
>
> static const char * const rockchip_board_dt_compat[] = {
> + "rockchip,rk1108",
> "rockchip,rk2928",
> "rockchip,rk3066a",
> "rockchip,rk3066b",
please split this into a separate patch, as code and dts changes need to go
through different branches.
Thanks
Heiko
^ permalink raw reply
* [PATCH 5/6] ARM: add low level debug uart for rk1108
From: Andy Yan @ 2016-11-04 7:58 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <12034481.WHiLii4Pov@phil>
Hi Heiko:
On 2016?11?04? 15:36, Heiko Stuebner wrote:
> Am Donnerstag, 3. November 2016, 20:42:21 CET schrieb Andy Yan:
>> RK1108 UARTs are Synopsis DesignWare 8250 compatible.
>> Only with different register addresses.
>>
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>> ---
>>
>> arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++++
>> 1 file changed, 30 insertions(+)
>>
>> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
>> index d83f7c3..408540f 100644
>> --- a/arch/arm/Kconfig.debug
>> +++ b/arch/arm/Kconfig.debug
>> @@ -776,6 +776,30 @@ choice
>> their output to the standard serial port on the RealView
>> PB1176 platform.
>>
>> + config DEBUG_RK1108_UART0
>> + bool "Kernel low-level debugging messages via Rockchip RK1108 UART0"
>> + depends on ARCH_ROCKCHIP
>> + select DEBUG_UART_8250
>> + help
>> + Say Y here if you want kernel low-level debugging support
>> + on Rockchip RK1108 based platforms.
>> +
>> + config DEBUG_RK1108_UART1
>> + bool "Kernel low-level debugging messages via Rockchip RK1108 UART1"
>> + depends on ARCH_ROCKCHIP
>> + select DEBUG_UART_8250
>> + help
>> + Say Y here if you want kernel low-level debugging support
>> + on Rockchip RK1108 based platforms.
>> +
>> + config DEBUG_RK1108_UART2
>> + bool "Kernel low-level debugging messages via Rockchip RK1108 UART2"
>> + depends on ARCH_ROCKCHIP
>> + select DEBUG_UART_8250
>> + help
>> + Say Y here if you want kernel low-level debugging support
>> + on Rockchip RK1108 based platforms.
>> +
> are you sure, you need all 3 of them?
>
> I.e. most Rockchip SoCs so far had one uart somewhat designated as debug uart.
> Most likely due to it not having rts/cts and being used in reference
> schematics, but no one ever used another uart than uart2 on previous socs. So
> ideally we could check and only add uarts we actually need for now. More can
> be added later anyway once boards try to use them.
>
>
> Heiko
>
Actually, I have two boards on my hand, one uses uart0 as debug
port and the another uses uart2, so I add all of them here.
I have a question here, I not very clear how to get the
DEBUG_UART_VIRT value here, I now set the value I got from uart driver
and it works , is there some rule or method to calculate this
DEBUG_UART_VIRT value on different platform?
>
^ permalink raw reply
* [PATCH] clk: sunxi: Fix M factor computation for APB1
From: Maxime Ripard @ 2016-11-04 7:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478217236-12831-1-git-send-email-stephan@soliotek.com>
On Fri, Nov 04, 2016 at 12:53:56AM +0100, St?phan Rafin wrote:
> commit cfa636886033 ("clk: sunxi: factors: Consolidate get_factors
> parameters into a struct") introduced a regression for m factor
> computation in sun4i_get_apb1_factors function.
>
> The old code reassigned the "parent_rate" parameter to the targeted
> divisor value and was buggy for the returned frequency but not for the
> computed factors. Now, returned frequency is good but m factor is
> incorrectly computed (its max value 31 is always set resulting in a
> significantly slower frequency than the requested one...)
>
> This patch simply restores the original proper computation for m while
> keeping the good changes for returned rate.
>
> Signed-off-by: St?phan Rafin <stephan@soliotek.com>
Applied (added a Fixes tag), thanks
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161104/a56fa6c0/attachment.sig>
^ permalink raw reply
* [PATCH] drm/sun4i: Propagate error to the caller
From: Maxime Ripard @ 2016-11-04 7:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161104061352.12596-1-christophe.jaillet@wanadoo.fr>
On Fri, Nov 04, 2016 at 07:13:52AM +0100, Christophe JAILLET wrote:
> If 'sun4i_layers_init()' returns an error, propagate it instead of
> returning -EINVAL unconditionally.
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Applied, thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161104/873dafd5/attachment.sig>
^ permalink raw reply
* [PATCHv6] support for AD5820 camera auto-focus coil
From: Pavel Machek @ 2016-11-04 7:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161103214900.GH3217@valkosipuli.retiisi.org.uk>
Hi!
> > > I have to admit I mostly use an N9.
> >
> > Well, if you compare that to development on PC, I prefer PC.
> >
> > Even arm development boards are usually easier, as they don't need too
> > complex userspace, and do have working serial ports.
> >
> > But I do have a serial adapter for N900 now (thanks, sre), so my main
> > problem now is that N900 takes a lot of time to boot into usable
> > state.
>
> Yeah... I just upgraded my Debian installation (armel over NFS) a few major
> numbers and I find it a lot slower than it used to do. I presume that's
> mostly because of systemd...
I'm not sure if systemd is to blame. (I'm booting into full GUI...)
And yes, I noticed the slowdown in Debian 7 -> 8 transition, so I'm
basically staying at Debian 7 as far as I can.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161104/7f029ae6/attachment.sig>
^ permalink raw reply
* [PATCH v15 4/4] arm: dts: mt2701: Use real clock for UARTs
From: Erin Lo @ 2016-11-04 7:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478245388-1412-1-git-send-email-erin.lo@mediatek.com>
We used to use a fixed rate clock for the UARTs. Now that we have clock
support we can associate the correct clocks to the UARTs and drop the
26MHz fixed rate UART clock.
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
arch/arm/boot/dts/mt2701.dtsi | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index c9a8dbf..7eab6f4 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -73,12 +73,6 @@
#clock-cells = <0>;
};
- uart_clk: dummy26m {
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
- #clock-cells = <0>;
- };
-
clk26m: oscillator at 0 {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -186,7 +180,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -195,7 +190,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -204,7 +200,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -213,7 +210,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+ clock-names = "baud", "bus";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related
* [PATCH v15 3/4] arm: dts: mt2701: Add clock controller device nodes
From: Erin Lo @ 2016-11-04 7:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478245388-1412-1-git-send-email-erin.lo@mediatek.com>
From: James Liao <jamesjj.liao@mediatek.com>
Add clock controller nodes for MT2701, include topckgen, infracfg,
pericfg and apmixedsys. This patch also add two oscillators that
provide clocks for MT2701.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
arch/arm/boot/dts/mt2701.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 18596a2..c9a8dbf 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -12,8 +12,10 @@
* GNU General Public License for more details.
*/
+#include <dt-bindings/clock/mt2701-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt2701-resets.h>
#include "skeleton64.dtsi"
#include "mt2701-pinfunc.h"
@@ -77,6 +79,20 @@
#clock-cells = <0>;
};
+ clk26m: oscillator at 0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ rtc32k: oscillator at 1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "rtc32k";
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
@@ -104,6 +120,26 @@
reg = <0 0x10005000 0 0x1000>;
};
+ topckgen: syscon at 10000000 {
+ compatible = "mediatek,mt2701-topckgen", "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: syscon at 10001000 {
+ compatible = "mediatek,mt2701-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pericfg: syscon at 10003000 {
+ compatible = "mediatek,mt2701-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
watchdog: watchdog at 10007000 {
compatible = "mediatek,mt2701-wdt",
"mediatek,mt6589-wdt";
@@ -128,6 +164,12 @@
reg = <0 0x10200100 0 0x1c>;
};
+ apmixedsys: syscon at 10209000 {
+ compatible = "mediatek,mt2701-apmixedsys", "syscon";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller at 10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
--
1.9.1
^ permalink raw reply related
* [PATCH v15 2/4] reset: mediatek: Add MT2701 reset driver
From: Erin Lo @ 2016-11-04 7:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478245388-1412-1-git-send-email-erin.lo@mediatek.com>
From: Shunli Wang <shunli.wang@mediatek.com>
In infrasys and perifsys, there are many reset
control bits for kinds of modules. These bits are
used as actual reset controllers to be registered
into kernel's generic reset controller framework.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/clk/mediatek/clk-mt2701-hif.c | 8 ++++++--
drivers/clk/mediatek/clk-mt2701.c | 12 ++++++++++--
2 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt2701-hif.c b/drivers/clk/mediatek/clk-mt2701-hif.c
index 452581c..18f3723 100644
--- a/drivers/clk/mediatek/clk-mt2701-hif.c
+++ b/drivers/clk/mediatek/clk-mt2701-hif.c
@@ -58,12 +58,16 @@ static int clk_mt2701_hif_probe(struct platform_device *pdev)
clk_data);
r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
- if (r)
+ if (r) {
dev_err(&pdev->dev,
"could not register clock provider: %s: %d\n",
pdev->name, r);
+ return r;
+ }
+
+ mtk_register_reset_controller(node, 1, 0x34);
- return r;
+ return 0;
}
static struct platform_driver clk_mt2701_hif_drv = {
diff --git a/drivers/clk/mediatek/clk-mt2701.c b/drivers/clk/mediatek/clk-mt2701.c
index 6d2f82f..6f26e6a 100644
--- a/drivers/clk/mediatek/clk-mt2701.c
+++ b/drivers/clk/mediatek/clk-mt2701.c
@@ -787,8 +787,12 @@ static int mtk_infrasys_init(struct platform_device *pdev)
infra_clk_data);
r = of_clk_add_provider(node, of_clk_src_onecell_get, infra_clk_data);
+ if (r)
+ return r;
- return r;
+ mtk_register_reset_controller(node, 2, 0x30);
+
+ return 0;
}
static const struct mtk_gate_regs peri0_cg_regs = {
@@ -906,8 +910,12 @@ static int mtk_pericfg_init(struct platform_device *pdev)
&mt2701_clk_lock, clk_data);
r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ return r;
- return r;
+ mtk_register_reset_controller(node, 2, 0x0);
+
+ return 0;
}
#define MT8590_PLL_FMAX (2000 * MHZ)
--
1.9.1
^ permalink raw reply related
* [PATCH v15 1/4] clk: mediatek: Add MT2701 clock support
From: Erin Lo @ 2016-11-04 7:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478245388-1412-1-git-send-email-erin.lo@mediatek.com>
From: Shunli Wang <shunli.wang@mediatek.com>
Add MT2701 clock support, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
---
drivers/clk/mediatek/Kconfig | 43 ++
drivers/clk/mediatek/Makefile | 7 +
drivers/clk/mediatek/clk-gate.c | 52 ++
drivers/clk/mediatek/clk-gate.h | 2 +
drivers/clk/mediatek/clk-mt2701-bdp.c | 138 +++++
drivers/clk/mediatek/clk-mt2701-eth.c | 80 +++
drivers/clk/mediatek/clk-mt2701-hif.c | 77 +++
drivers/clk/mediatek/clk-mt2701-img.c | 80 +++
drivers/clk/mediatek/clk-mt2701-mm.c | 123 ++++
drivers/clk/mediatek/clk-mt2701-vdec.c | 91 +++
drivers/clk/mediatek/clk-mt2701.c | 1027 ++++++++++++++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.c | 40 ++
drivers/clk/mediatek/clk-mtk.h | 41 +-
drivers/clk/mediatek/clk-pll.c | 1 +
14 files changed, 1797 insertions(+), 5 deletions(-)
create mode 100644 drivers/clk/mediatek/clk-mt2701-bdp.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-eth.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-hif.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-img.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-mm.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-vdec.c
create mode 100644 drivers/clk/mediatek/clk-mt2701.c
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 380c372..7202db5 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -6,6 +6,49 @@ config COMMON_CLK_MEDIATEK
---help---
Mediatek SoCs' clock support.
+config COMMON_CLK_MT2701
+ bool "Clock driver for Mediatek MT2701"
+ select COMMON_CLK_MEDIATEK
+ default ARCH_MEDIATEK
+ ---help---
+ This driver supports Mediatek MT2701 basic clocks.
+
+config COMMON_CLK_MT2701_MMSYS
+ bool "Clock driver for Mediatek MT2701 mmsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 mmsys clocks.
+
+config COMMON_CLK_MT2701_IMGSYS
+ bool "Clock driver for Mediatek MT2701 imgsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 imgsys clocks.
+
+config COMMON_CLK_MT2701_VDECSYS
+ bool "Clock driver for Mediatek MT2701 vdecsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 vdecsys clocks.
+
+config COMMON_CLK_MT2701_HIFSYS
+ bool "Clock driver for Mediatek MT2701 hifsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 hifsys clocks.
+
+config COMMON_CLK_MT2701_ETHSYS
+ bool "Clock driver for Mediatek MT2701 ethsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 ethsys clocks.
+
+config COMMON_CLK_MT2701_BDPSYS
+ bool "Clock driver for Mediatek MT2701 bdpsys"
+ select COMMON_CLK_MT2701
+ ---help---
+ This driver supports Mediatek MT2701 bdpsys clocks.
+
config COMMON_CLK_MT8135
bool "Clock driver for Mediatek MT8135"
select COMMON_CLK_MEDIATEK
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 32e7222..19ae7ef 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1,4 +1,11 @@
obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
+obj-$(CONFIG_COMMON_CLK_MT2701) += clk-mt2701.o
+obj-$(CONFIG_COMMON_CLK_MT2701_BDPSYS) += clk-mt2701-bdp.o
+obj-$(CONFIG_COMMON_CLK_MT2701_ETHSYS) += clk-mt2701-eth.o
+obj-$(CONFIG_COMMON_CLK_MT2701_HIFSYS) += clk-mt2701-hif.o
+obj-$(CONFIG_COMMON_CLK_MT2701_IMGSYS) += clk-mt2701-img.o
+obj-$(CONFIG_COMMON_CLK_MT2701_MMSYS) += clk-mt2701-mm.o
+obj-$(CONFIG_COMMON_CLK_MT2701_VDECSYS) += clk-mt2701-vdec.o
obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o
diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c
index d8787bf..934bf0e 100644
--- a/drivers/clk/mediatek/clk-gate.c
+++ b/drivers/clk/mediatek/clk-gate.c
@@ -61,6 +61,22 @@ static void mtk_cg_clr_bit(struct clk_hw *hw)
regmap_write(cg->regmap, cg->clr_ofs, BIT(cg->bit));
}
+static void mtk_cg_set_bit_no_setclr(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_mtk_clk_gate(hw);
+ u32 cgbit = BIT(cg->bit);
+
+ regmap_update_bits(cg->regmap, cg->sta_ofs, cgbit, cgbit);
+}
+
+static void mtk_cg_clr_bit_no_setclr(struct clk_hw *hw)
+{
+ struct mtk_clk_gate *cg = to_mtk_clk_gate(hw);
+ u32 cgbit = BIT(cg->bit);
+
+ regmap_update_bits(cg->regmap, cg->sta_ofs, cgbit, 0);
+}
+
static int mtk_cg_enable(struct clk_hw *hw)
{
mtk_cg_clr_bit(hw);
@@ -85,6 +101,30 @@ static void mtk_cg_disable_inv(struct clk_hw *hw)
mtk_cg_clr_bit(hw);
}
+static int mtk_cg_enable_no_setclr(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit_no_setclr(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable_no_setclr(struct clk_hw *hw)
+{
+ mtk_cg_set_bit_no_setclr(hw);
+}
+
+static int mtk_cg_enable_inv_no_setclr(struct clk_hw *hw)
+{
+ mtk_cg_set_bit_no_setclr(hw);
+
+ return 0;
+}
+
+static void mtk_cg_disable_inv_no_setclr(struct clk_hw *hw)
+{
+ mtk_cg_clr_bit_no_setclr(hw);
+}
+
const struct clk_ops mtk_clk_gate_ops_setclr = {
.is_enabled = mtk_cg_bit_is_cleared,
.enable = mtk_cg_enable,
@@ -97,6 +137,18 @@ static void mtk_cg_disable_inv(struct clk_hw *hw)
.disable = mtk_cg_disable_inv,
};
+const struct clk_ops mtk_clk_gate_ops_no_setclr = {
+ .is_enabled = mtk_cg_bit_is_cleared,
+ .enable = mtk_cg_enable_no_setclr,
+ .disable = mtk_cg_disable_no_setclr,
+};
+
+const struct clk_ops mtk_clk_gate_ops_no_setclr_inv = {
+ .is_enabled = mtk_cg_bit_is_set,
+ .enable = mtk_cg_enable_inv_no_setclr,
+ .disable = mtk_cg_disable_inv_no_setclr,
+};
+
struct clk *mtk_clk_register_gate(
const char *name,
const char *parent_name,
diff --git a/drivers/clk/mediatek/clk-gate.h b/drivers/clk/mediatek/clk-gate.h
index b182160..72ef89b 100644
--- a/drivers/clk/mediatek/clk-gate.h
+++ b/drivers/clk/mediatek/clk-gate.h
@@ -36,6 +36,8 @@ static inline struct mtk_clk_gate *to_mtk_clk_gate(struct clk_hw *hw)
extern const struct clk_ops mtk_clk_gate_ops_setclr;
extern const struct clk_ops mtk_clk_gate_ops_setclr_inv;
+extern const struct clk_ops mtk_clk_gate_ops_no_setclr;
+extern const struct clk_ops mtk_clk_gate_ops_no_setclr_inv;
struct clk *mtk_clk_register_gate(
const char *name,
diff --git a/drivers/clk/mediatek/clk-mt2701-bdp.c b/drivers/clk/mediatek/clk-mt2701-bdp.c
new file mode 100644
index 0000000..fe4964d
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-bdp.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs bdp0_cg_regs = {
+ .set_ofs = 0x0104,
+ .clr_ofs = 0x0108,
+ .sta_ofs = 0x0100,
+};
+
+static const struct mtk_gate_regs bdp1_cg_regs = {
+ .set_ofs = 0x0114,
+ .clr_ofs = 0x0118,
+ .sta_ofs = 0x0110,
+};
+
+#define GATE_BDP0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &bdp0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+#define GATE_BDP1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &bdp1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+static const struct mtk_gate bdp_clks[] = {
+ GATE_BDP0(CLK_BDP_BRG_BA, "brg_baclk", "mm_sel", 0),
+ GATE_BDP0(CLK_BDP_BRG_DRAM, "brg_dram", "mm_sel", 1),
+ GATE_BDP0(CLK_BDP_LARB_DRAM, "larb_dram", "mm_sel", 2),
+ GATE_BDP0(CLK_BDP_WR_VDI_PXL, "wr_vdi_pxl", "hdmi_0_deep340m", 3),
+ GATE_BDP0(CLK_BDP_WR_VDI_DRAM, "wr_vdi_dram", "mm_sel", 4),
+ GATE_BDP0(CLK_BDP_WR_B, "wr_bclk", "mm_sel", 5),
+ GATE_BDP0(CLK_BDP_DGI_IN, "dgi_in", "dpi1_sel", 6),
+ GATE_BDP0(CLK_BDP_DGI_OUT, "dgi_out", "dpi1_sel", 7),
+ GATE_BDP0(CLK_BDP_FMT_MAST_27, "fmt_mast_27", "dpi1_sel", 8),
+ GATE_BDP0(CLK_BDP_FMT_B, "fmt_bclk", "mm_sel", 9),
+ GATE_BDP0(CLK_BDP_OSD_B, "osd_bclk", "mm_sel", 10),
+ GATE_BDP0(CLK_BDP_OSD_DRAM, "osd_dram", "mm_sel", 11),
+ GATE_BDP0(CLK_BDP_OSD_AGENT, "osd_agent", "osd_sel", 12),
+ GATE_BDP0(CLK_BDP_OSD_PXL, "osd_pxl", "dpi1_sel", 13),
+ GATE_BDP0(CLK_BDP_RLE_B, "rle_bclk", "mm_sel", 14),
+ GATE_BDP0(CLK_BDP_RLE_AGENT, "rle_agent", "mm_sel", 15),
+ GATE_BDP0(CLK_BDP_RLE_DRAM, "rle_dram", "mm_sel", 16),
+ GATE_BDP0(CLK_BDP_F27M, "f27m", "di_sel", 17),
+ GATE_BDP0(CLK_BDP_F27M_VDOUT, "f27m_vdout", "di_sel", 18),
+ GATE_BDP0(CLK_BDP_F27_74_74, "f27_74_74", "di_sel", 19),
+ GATE_BDP0(CLK_BDP_F2FS, "f2fs", "di_sel", 20),
+ GATE_BDP0(CLK_BDP_F2FS74_148, "f2fs74_148", "di_sel", 21),
+ GATE_BDP0(CLK_BDP_FB, "fbclk", "mm_sel", 22),
+ GATE_BDP0(CLK_BDP_VDO_DRAM, "vdo_dram", "mm_sel", 23),
+ GATE_BDP0(CLK_BDP_VDO_2FS, "vdo_2fs", "di_sel", 24),
+ GATE_BDP0(CLK_BDP_VDO_B, "vdo_bclk", "mm_sel", 25),
+ GATE_BDP0(CLK_BDP_WR_DI_PXL, "wr_di_pxl", "di_sel", 26),
+ GATE_BDP0(CLK_BDP_WR_DI_DRAM, "wr_di_dram", "mm_sel", 27),
+ GATE_BDP0(CLK_BDP_WR_DI_B, "wr_di_bclk", "mm_sel", 28),
+ GATE_BDP0(CLK_BDP_NR_PXL, "nr_pxl", "nr_sel", 29),
+ GATE_BDP0(CLK_BDP_NR_DRAM, "nr_dram", "mm_sel", 30),
+ GATE_BDP0(CLK_BDP_NR_B, "nr_bclk", "mm_sel", 31),
+ GATE_BDP1(CLK_BDP_RX_F, "rx_fclk", "hadds2_fbclk", 0),
+ GATE_BDP1(CLK_BDP_RX_X, "rx_xclk", "clk26m", 1),
+ GATE_BDP1(CLK_BDP_RXPDT, "rxpdtclk", "hdmi_0_pix340m", 2),
+ GATE_BDP1(CLK_BDP_RX_CSCL_N, "rx_cscl_n", "clk26m", 3),
+ GATE_BDP1(CLK_BDP_RX_CSCL, "rx_cscl", "clk26m", 4),
+ GATE_BDP1(CLK_BDP_RX_DDCSCL_N, "rx_ddcscl_n", "hdmi_scl_rx", 5),
+ GATE_BDP1(CLK_BDP_RX_DDCSCL, "rx_ddcscl", "hdmi_scl_rx", 6),
+ GATE_BDP1(CLK_BDP_RX_VCO, "rx_vcoclk", "hadds2pll_294m", 7),
+ GATE_BDP1(CLK_BDP_RX_DP, "rx_dpclk", "hdmi_0_pll340m", 8),
+ GATE_BDP1(CLK_BDP_RX_P, "rx_pclk", "hdmi_0_pll340m", 9),
+ GATE_BDP1(CLK_BDP_RX_M, "rx_mclk", "hadds2pll_294m", 10),
+ GATE_BDP1(CLK_BDP_RX_PLL, "rx_pllclk", "hdmi_0_pix340m", 11),
+ GATE_BDP1(CLK_BDP_BRG_RT_B, "brg_rt_bclk", "mm_sel", 12),
+ GATE_BDP1(CLK_BDP_BRG_RT_DRAM, "brg_rt_dram", "mm_sel", 13),
+ GATE_BDP1(CLK_BDP_LARBRT_DRAM, "larbrt_dram", "mm_sel", 14),
+ GATE_BDP1(CLK_BDP_TMDS_SYN, "tmds_syn", "hdmi_0_pll340m", 15),
+ GATE_BDP1(CLK_BDP_HDMI_MON, "hdmi_mon", "hdmi_0_pll340m", 16),
+};
+
+static const struct of_device_id of_match_clk_mt2701_bdp[] = {
+ { .compatible = "mediatek,mt2701-bdpsys", },
+ {}
+};
+
+static int clk_mt2701_bdp_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_BDP_NR);
+
+ mtk_clk_register_gates(node, bdp_clks, ARRAY_SIZE(bdp_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_bdp_drv = {
+ .probe = clk_mt2701_bdp_probe,
+ .driver = {
+ .name = "clk-mt2701-bdp",
+ .of_match_table = of_match_clk_mt2701_bdp,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_bdp_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-eth.c b/drivers/clk/mediatek/clk-mt2701-eth.c
new file mode 100644
index 0000000..877be87
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-eth.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs eth_cg_regs = {
+ .sta_ofs = 0x0030,
+};
+
+#define GATE_ETH(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = ð_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
+ }
+
+static const struct mtk_gate eth_clks[] = {
+ GATE_ETH(CLK_ETHSYS_HSDMA, "hsdma_clk", "ethif_sel", 5),
+ GATE_ETH(CLK_ETHSYS_ESW, "esw_clk", "ethpll_500m_ck", 6),
+ GATE_ETH(CLK_ETHSYS_GP2, "gp2_clk", "trgpll", 7),
+ GATE_ETH(CLK_ETHSYS_GP1, "gp1_clk", "ethpll_500m_ck", 8),
+ GATE_ETH(CLK_ETHSYS_PCM, "pcm_clk", "ethif_sel", 11),
+ GATE_ETH(CLK_ETHSYS_GDMA, "gdma_clk", "ethif_sel", 14),
+ GATE_ETH(CLK_ETHSYS_I2S, "i2s_clk", "ethif_sel", 17),
+ GATE_ETH(CLK_ETHSYS_CRYPTO, "crypto_clk", "ethif_sel", 29),
+};
+
+static const struct of_device_id of_match_clk_mt2701_eth[] = {
+ { .compatible = "mediatek,mt2701-ethsys", },
+ {}
+};
+
+static int clk_mt2701_eth_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_ETHSYS_NR);
+
+ mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_eth_drv = {
+ .probe = clk_mt2701_eth_probe,
+ .driver = {
+ .name = "clk-mt2701-eth",
+ .of_match_table = of_match_clk_mt2701_eth,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_eth_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-hif.c b/drivers/clk/mediatek/clk-mt2701-hif.c
new file mode 100644
index 0000000..452581c
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-hif.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs hif_cg_regs = {
+ .sta_ofs = 0x0030,
+};
+
+#define GATE_HIF(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &hif_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
+ }
+
+static const struct mtk_gate hif_clks[] = {
+ GATE_HIF(CLK_HIFSYS_USB0PHY, "usb0_phy_clk", "ethpll_500m_ck", 21),
+ GATE_HIF(CLK_HIFSYS_USB1PHY, "usb1_phy_clk", "ethpll_500m_ck", 22),
+ GATE_HIF(CLK_HIFSYS_PCIE0, "pcie0_clk", "ethpll_500m_ck", 24),
+ GATE_HIF(CLK_HIFSYS_PCIE1, "pcie1_clk", "ethpll_500m_ck", 25),
+ GATE_HIF(CLK_HIFSYS_PCIE2, "pcie2_clk", "ethpll_500m_ck", 26),
+};
+
+static const struct of_device_id of_match_clk_mt2701_hif[] = {
+ { .compatible = "mediatek,mt2701-hifsys", },
+ {}
+};
+
+static int clk_mt2701_hif_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_HIFSYS_NR);
+
+ mtk_clk_register_gates(node, hif_clks, ARRAY_SIZE(hif_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_hif_drv = {
+ .probe = clk_mt2701_hif_probe,
+ .driver = {
+ .name = "clk-mt2701-hif",
+ .of_match_table = of_match_clk_mt2701_hif,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_hif_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-img.c b/drivers/clk/mediatek/clk-mt2701-img.c
new file mode 100644
index 0000000..b7441c9
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-img.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs img_cg_regs = {
+ .set_ofs = 0x0004,
+ .clr_ofs = 0x0008,
+ .sta_ofs = 0x0000,
+};
+
+#define GATE_IMG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &img_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate img_clks[] = {
+ GATE_IMG(CLK_IMG_SMI_COMM, "img_smi_comm", "mm_sel", 0),
+ GATE_IMG(CLK_IMG_RESZ, "img_resz", "mm_sel", 1),
+ GATE_IMG(CLK_IMG_JPGDEC_SMI, "img_jpgdec_smi", "mm_sel", 5),
+ GATE_IMG(CLK_IMG_JPGDEC, "img_jpgdec", "mm_sel", 6),
+ GATE_IMG(CLK_IMG_VENC_LT, "img_venc_lt", "mm_sel", 8),
+ GATE_IMG(CLK_IMG_VENC, "img_venc", "mm_sel", 9),
+};
+
+static const struct of_device_id of_match_clk_mt2701_img[] = {
+ { .compatible = "mediatek,mt2701-imgsys", },
+ {}
+};
+
+static int clk_mt2701_img_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_IMG_NR);
+
+ mtk_clk_register_gates(node, img_clks, ARRAY_SIZE(img_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_img_drv = {
+ .probe = clk_mt2701_img_probe,
+ .driver = {
+ .name = "clk-mt2701-img",
+ .of_match_table = of_match_clk_mt2701_img,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_img_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-mm.c b/drivers/clk/mediatek/clk-mt2701-mm.c
new file mode 100644
index 0000000..fe1f850
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-mm.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs disp0_cg_regs = {
+ .set_ofs = 0x0104,
+ .clr_ofs = 0x0108,
+ .sta_ofs = 0x0100,
+};
+
+static const struct mtk_gate_regs disp1_cg_regs = {
+ .set_ofs = 0x0114,
+ .clr_ofs = 0x0118,
+ .sta_ofs = 0x0110,
+};
+
+#define GATE_DISP0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &disp0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_DISP1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &disp1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate mm_clks[] = {
+ GATE_DISP0(CLK_MM_SMI_COMMON, "mm_smi_comm", "mm_sel", 0),
+ GATE_DISP0(CLK_MM_SMI_LARB0, "mm_smi_larb0", "mm_sel", 1),
+ GATE_DISP0(CLK_MM_CMDQ, "mm_cmdq", "mm_sel", 2),
+ GATE_DISP0(CLK_MM_MUTEX, "mm_mutex", "mm_sel", 3),
+ GATE_DISP0(CLK_MM_DISP_COLOR, "mm_disp_color", "mm_sel", 4),
+ GATE_DISP0(CLK_MM_DISP_BLS, "mm_disp_bls", "mm_sel", 5),
+ GATE_DISP0(CLK_MM_DISP_WDMA, "mm_disp_wdma", "mm_sel", 6),
+ GATE_DISP0(CLK_MM_DISP_RDMA, "mm_disp_rdma", "mm_sel", 7),
+ GATE_DISP0(CLK_MM_DISP_OVL, "mm_disp_ovl", "mm_sel", 8),
+ GATE_DISP0(CLK_MM_MDP_TDSHP, "mm_mdp_tdshp", "mm_sel", 9),
+ GATE_DISP0(CLK_MM_MDP_WROT, "mm_mdp_wrot", "mm_sel", 10),
+ GATE_DISP0(CLK_MM_MDP_WDMA, "mm_mdp_wdma", "mm_sel", 11),
+ GATE_DISP0(CLK_MM_MDP_RSZ1, "mm_mdp_rsz1", "mm_sel", 12),
+ GATE_DISP0(CLK_MM_MDP_RSZ0, "mm_mdp_rsz0", "mm_sel", 13),
+ GATE_DISP0(CLK_MM_MDP_RDMA, "mm_mdp_rdma", "mm_sel", 14),
+ GATE_DISP0(CLK_MM_MDP_BLS_26M, "mm_mdp_bls_26m", "pwm_sel", 15),
+ GATE_DISP0(CLK_MM_CAM_MDP, "mm_cam_mdp", "mm_sel", 16),
+ GATE_DISP0(CLK_MM_FAKE_ENG, "mm_fake_eng", "mm_sel", 17),
+ GATE_DISP0(CLK_MM_MUTEX_32K, "mm_mutex_32k", "rtc_sel", 18),
+ GATE_DISP0(CLK_MM_DISP_RDMA1, "mm_disp_rdma1", "mm_sel", 19),
+ GATE_DISP0(CLK_MM_DISP_UFOE, "mm_disp_ufoe", "mm_sel", 20),
+ GATE_DISP1(CLK_MM_DSI_ENGINE, "mm_dsi_eng", "mm_sel", 0),
+ GATE_DISP1(CLK_MM_DSI_DIG, "mm_dsi_dig", "dsi0_lntc_dsi", 1),
+ GATE_DISP1(CLK_MM_DPI_DIGL, "mm_dpi_digl", "dpi0_sel", 2),
+ GATE_DISP1(CLK_MM_DPI_ENGINE, "mm_dpi_eng", "mm_sel", 3),
+ GATE_DISP1(CLK_MM_DPI1_DIGL, "mm_dpi1_digl", "dpi1_sel", 4),
+ GATE_DISP1(CLK_MM_DPI1_ENGINE, "mm_dpi1_eng", "mm_sel", 5),
+ GATE_DISP1(CLK_MM_TVE_OUTPUT, "mm_tve_output", "tve_sel", 6),
+ GATE_DISP1(CLK_MM_TVE_INPUT, "mm_tve_input", "dpi0_sel", 7),
+ GATE_DISP1(CLK_MM_HDMI_PIXEL, "mm_hdmi_pixel", "dpi1_sel", 8),
+ GATE_DISP1(CLK_MM_HDMI_PLL, "mm_hdmi_pll", "hdmi_sel", 9),
+ GATE_DISP1(CLK_MM_HDMI_AUDIO, "mm_hdmi_audio", "apll_sel", 10),
+ GATE_DISP1(CLK_MM_HDMI_SPDIF, "mm_hdmi_spdif", "apll_sel", 11),
+ GATE_DISP1(CLK_MM_TVE_FMM, "mm_tve_fmm", "mm_sel", 14),
+};
+
+static const struct of_device_id of_match_clk_mt2701_mm[] = {
+ { .compatible = "mediatek,mt2701-mmsys", },
+ {}
+};
+
+static int clk_mt2701_mm_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_MM_NR);
+
+ mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_mm_drv = {
+ .probe = clk_mt2701_mm_probe,
+ .driver = {
+ .name = "clk-mt2701-mm",
+ .of_match_table = of_match_clk_mt2701_mm,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_mm_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701-vdec.c b/drivers/clk/mediatek/clk-mt2701-vdec.c
new file mode 100644
index 0000000..d3c0fc9
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701-vdec.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+static const struct mtk_gate_regs vdec0_cg_regs = {
+ .set_ofs = 0x0000,
+ .clr_ofs = 0x0004,
+ .sta_ofs = 0x0000,
+};
+
+static const struct mtk_gate_regs vdec1_cg_regs = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x000c,
+ .sta_ofs = 0x0008,
+};
+
+#define GATE_VDEC0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &vdec0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+#define GATE_VDEC1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &vdec1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+static const struct mtk_gate vdec_clks[] = {
+ GATE_VDEC0(CLK_VDEC_CKGEN, "vdec_cken", "vdec_sel", 0),
+ GATE_VDEC1(CLK_VDEC_LARB, "vdec_larb_cken", "mm_sel", 0),
+};
+
+static const struct of_device_id of_match_clk_mt2701_vdec[] = {
+ { .compatible = "mediatek,mt2701-vdecsys", },
+ {}
+};
+
+static int clk_mt2701_vdec_probe(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_VDEC_NR);
+
+ mtk_clk_register_gates(node, vdec_clks, ARRAY_SIZE(vdec_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_vdec_drv = {
+ .probe = clk_mt2701_vdec_probe,
+ .driver = {
+ .name = "clk-mt2701-vdec",
+ .of_match_table = of_match_clk_mt2701_vdec,
+ },
+};
+
+builtin_platform_driver(clk_mt2701_vdec_drv);
diff --git a/drivers/clk/mediatek/clk-mt2701.c b/drivers/clk/mediatek/clk-mt2701.c
new file mode 100644
index 0000000..6d2f82f
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt2701.c
@@ -0,0 +1,1027 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt2701-clk.h>
+
+/*
+ * For some clocks, we don't care what their actual rates are. And these
+ * clocks may change their rate on different products or different scenarios.
+ * So we model these clocks' rate as 0, to denote it's not an actual rate.
+ */
+#define DUMMY_RATE 0
+
+static DEFINE_SPINLOCK(mt2701_clk_lock);
+
+static const struct mtk_fixed_clk top_fixed_clks[] = {
+ FIXED_CLK(CLK_TOP_DPI, "dpi_ck", "clk26m",
+ 108 * MHZ),
+ FIXED_CLK(CLK_TOP_DMPLL, "dmpll_ck", "clk26m",
+ 400 * MHZ),
+ FIXED_CLK(CLK_TOP_VENCPLL, "vencpll_ck", "clk26m",
+ 295750000),
+ FIXED_CLK(CLK_TOP_HDMI_0_PIX340M, "hdmi_0_pix340m", "clk26m",
+ 340 * MHZ),
+ FIXED_CLK(CLK_TOP_HDMI_0_DEEP340M, "hdmi_0_deep340m", "clk26m",
+ 340 * MHZ),
+ FIXED_CLK(CLK_TOP_HDMI_0_PLL340M, "hdmi_0_pll340m", "clk26m",
+ 340 * MHZ),
+ FIXED_CLK(CLK_TOP_HDMITX_CLKDIG_CTS, "hdmitx_dig_cts", "clk26m",
+ 300 * MHZ),
+ FIXED_CLK(CLK_TOP_HADDS2_FB, "hadds2_fbclk", "clk26m",
+ 27 * MHZ),
+ FIXED_CLK(CLK_TOP_WBG_DIG_416M, "wbg_dig_ck_416m", "clk26m",
+ 416 * MHZ),
+ FIXED_CLK(CLK_TOP_DSI0_LNTC_DSI, "dsi0_lntc_dsi", "clk26m",
+ 143 * MHZ),
+ FIXED_CLK(CLK_TOP_HDMI_SCL_RX, "hdmi_scl_rx", "clk26m",
+ 27 * MHZ),
+ FIXED_CLK(CLK_TOP_AUD_EXT1, "aud_ext1", "clk26m",
+ DUMMY_RATE),
+ FIXED_CLK(CLK_TOP_AUD_EXT2, "aud_ext2", "clk26m",
+ DUMMY_RATE),
+ FIXED_CLK(CLK_TOP_NFI1X_PAD, "nfi1x_pad", "clk26m",
+ DUMMY_RATE),
+};
+
+static const struct mtk_fixed_factor top_fixed_divs[] = {
+ FACTOR(CLK_TOP_SYSPLL, "syspll_ck", "mainpll", 1, 1),
+ FACTOR(CLK_TOP_SYSPLL_D2, "syspll_d2", "mainpll", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL_D3, "syspll_d3", "mainpll", 1, 3),
+ FACTOR(CLK_TOP_SYSPLL_D5, "syspll_d5", "mainpll", 1, 5),
+ FACTOR(CLK_TOP_SYSPLL_D7, "syspll_d7", "mainpll", 1, 7),
+ FACTOR(CLK_TOP_SYSPLL1_D2, "syspll1_d2", "syspll_d2", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL1_D4, "syspll1_d4", "syspll_d2", 1, 4),
+ FACTOR(CLK_TOP_SYSPLL1_D8, "syspll1_d8", "syspll_d2", 1, 8),
+ FACTOR(CLK_TOP_SYSPLL1_D16, "syspll1_d16", "syspll_d2", 1, 16),
+ FACTOR(CLK_TOP_SYSPLL2_D2, "syspll2_d2", "syspll_d3", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL2_D4, "syspll2_d4", "syspll_d3", 1, 4),
+ FACTOR(CLK_TOP_SYSPLL2_D8, "syspll2_d8", "syspll_d3", 1, 8),
+ FACTOR(CLK_TOP_SYSPLL3_D2, "syspll3_d2", "syspll_d5", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL3_D4, "syspll3_d4", "syspll_d5", 1, 4),
+ FACTOR(CLK_TOP_SYSPLL4_D2, "syspll4_d2", "syspll_d7", 1, 2),
+ FACTOR(CLK_TOP_SYSPLL4_D4, "syspll4_d4", "syspll_d7", 1, 4),
+
+ FACTOR(CLK_TOP_UNIVPLL, "univpll_ck", "univpll", 1, 1),
+ FACTOR(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univpll", 1, 2),
+ FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll", 1, 3),
+ FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll", 1, 5),
+ FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll", 1, 7),
+ FACTOR(CLK_TOP_UNIVPLL_D26, "univpll_d26", "univpll", 1, 26),
+ FACTOR(CLK_TOP_UNIVPLL_D52, "univpll_d52", "univpll", 1, 52),
+ FACTOR(CLK_TOP_UNIVPLL_D108, "univpll_d108", "univpll", 1, 108),
+ FACTOR(CLK_TOP_USB_PHY48M, "usb_phy48m_ck", "univpll", 1, 26),
+ FACTOR(CLK_TOP_UNIVPLL1_D2, "univpll1_d2", "univpll_d2", 1, 2),
+ FACTOR(CLK_TOP_UNIVPLL1_D4, "univpll1_d4", "univpll_d2", 1, 4),
+ FACTOR(CLK_TOP_UNIVPLL1_D8, "univpll1_d8", "univpll_d2", 1, 8),
+ FACTOR(CLK_TOP_8BDAC, "8bdac_ck", "univpll_d2", 1, 1),
+ FACTOR(CLK_TOP_UNIVPLL2_D2, "univpll2_d2", "univpll_d3", 1, 2),
+ FACTOR(CLK_TOP_UNIVPLL2_D4, "univpll2_d4", "univpll_d3", 1, 4),
+ FACTOR(CLK_TOP_UNIVPLL2_D8, "univpll2_d8", "univpll_d3", 1, 8),
+ FACTOR(CLK_TOP_UNIVPLL2_D16, "univpll2_d16", "univpll_d3", 1, 16),
+ FACTOR(CLK_TOP_UNIVPLL2_D32, "univpll2_d32", "univpll_d3", 1, 32),
+ FACTOR(CLK_TOP_UNIVPLL3_D2, "univpll3_d2", "univpll_d5", 1, 2),
+ FACTOR(CLK_TOP_UNIVPLL3_D4, "univpll3_d4", "univpll_d5", 1, 4),
+ FACTOR(CLK_TOP_UNIVPLL3_D8, "univpll3_d8", "univpll_d5", 1, 8),
+
+ FACTOR(CLK_TOP_MSDCPLL, "msdcpll_ck", "msdcpll", 1, 1),
+ FACTOR(CLK_TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll", 1, 2),
+ FACTOR(CLK_TOP_MSDCPLL_D4, "msdcpll_d4", "msdcpll", 1, 4),
+ FACTOR(CLK_TOP_MSDCPLL_D8, "msdcpll_d8", "msdcpll", 1, 8),
+
+ FACTOR(CLK_TOP_MMPLL, "mmpll_ck", "mmpll", 1, 1),
+ FACTOR(CLK_TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2),
+
+ FACTOR(CLK_TOP_DMPLL_D2, "dmpll_d2", "dmpll_ck", 1, 2),
+ FACTOR(CLK_TOP_DMPLL_D4, "dmpll_d4", "dmpll_ck", 1, 4),
+ FACTOR(CLK_TOP_DMPLL_X2, "dmpll_x2", "dmpll_ck", 1, 1),
+
+ FACTOR(CLK_TOP_TVDPLL, "tvdpll_ck", "tvdpll", 1, 1),
+ FACTOR(CLK_TOP_TVDPLL_D2, "tvdpll_d2", "tvdpll", 1, 2),
+ FACTOR(CLK_TOP_TVDPLL_D4, "tvdpll_d4", "tvdpll", 1, 4),
+
+ FACTOR(CLK_TOP_VDECPLL, "vdecpll_ck", "vdecpll", 1, 1),
+ FACTOR(CLK_TOP_TVD2PLL, "tvd2pll_ck", "tvd2pll", 1, 1),
+ FACTOR(CLK_TOP_TVD2PLL_D2, "tvd2pll_d2", "tvd2pll", 1, 2),
+
+ FACTOR(CLK_TOP_MIPIPLL, "mipipll", "dpi_ck", 1, 1),
+ FACTOR(CLK_TOP_MIPIPLL_D2, "mipipll_d2", "dpi_ck", 1, 2),
+ FACTOR(CLK_TOP_MIPIPLL_D4, "mipipll_d4", "dpi_ck", 1, 4),
+
+ FACTOR(CLK_TOP_HDMIPLL, "hdmipll_ck", "hdmitx_dig_cts", 1, 1),
+ FACTOR(CLK_TOP_HDMIPLL_D2, "hdmipll_d2", "hdmitx_dig_cts", 1, 2),
+ FACTOR(CLK_TOP_HDMIPLL_D3, "hdmipll_d3", "hdmitx_dig_cts", 1, 3),
+
+ FACTOR(CLK_TOP_ARMPLL_1P3G, "armpll_1p3g_ck", "armpll", 1, 1),
+
+ FACTOR(CLK_TOP_AUDPLL, "audpll", "audpll_sel", 1, 1),
+ FACTOR(CLK_TOP_AUDPLL_D4, "audpll_d4", "audpll_sel", 1, 4),
+ FACTOR(CLK_TOP_AUDPLL_D8, "audpll_d8", "audpll_sel", 1, 8),
+ FACTOR(CLK_TOP_AUDPLL_D16, "audpll_d16", "audpll_sel", 1, 16),
+ FACTOR(CLK_TOP_AUDPLL_D24, "audpll_d24", "audpll_sel", 1, 24),
+
+ FACTOR(CLK_TOP_AUD1PLL_98M, "aud1pll_98m_ck", "aud1pll", 1, 3),
+ FACTOR(CLK_TOP_AUD2PLL_90M, "aud2pll_90m_ck", "aud2pll", 1, 3),
+ FACTOR(CLK_TOP_HADDS2PLL_98M, "hadds2pll_98m", "hadds2pll", 1, 3),
+ FACTOR(CLK_TOP_HADDS2PLL_294M, "hadds2pll_294m", "hadds2pll", 1, 1),
+ FACTOR(CLK_TOP_ETHPLL_500M, "ethpll_500m_ck", "ethpll", 1, 1),
+ FACTOR(CLK_TOP_CLK26M_D8, "clk26m_d8", "clk26m", 1, 8),
+ FACTOR(CLK_TOP_32K_INTERNAL, "32k_internal", "clk26m", 1, 793),
+ FACTOR(CLK_TOP_32K_EXTERNAL, "32k_external", "rtc32k", 1, 1),
+};
+
+static const char * const axi_parents[] = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll2_d2",
+ "mmpll_d2",
+ "dmpll_d2"
+};
+
+static const char * const mem_parents[] = {
+ "clk26m",
+ "dmpll_ck"
+};
+
+static const char * const ddrphycfg_parents[] = {
+ "clk26m",
+ "syspll1_d8"
+};
+
+static const char * const mm_parents[] = {
+ "clk26m",
+ "vencpll_ck",
+ "syspll1_d2",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_ck"
+};
+
+static const char * const pwm_parents[] = {
+ "clk26m",
+ "univpll2_d4",
+ "univpll3_d2",
+ "univpll1_d4",
+};
+
+static const char * const vdec_parents[] = {
+ "clk26m",
+ "vdecpll_ck",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll2_d2",
+ "vencpll_ck",
+ "msdcpll_d2",
+ "mmpll_d2"
+};
+
+static const char * const mfg_parents[] = {
+ "clk26m",
+ "mmpll_ck",
+ "dmpll_x2_ck",
+ "msdcpll_ck",
+ "clk26m",
+ "syspll_d3",
+ "univpll_d3",
+ "univpll1_d2"
+};
+
+static const char * const camtg_parents[] = {
+ "clk26m",
+ "univpll_d26",
+ "univpll2_d2",
+ "syspll3_d2",
+ "syspll3_d4",
+ "msdcpll_d2",
+ "mmpll_d2"
+};
+
+static const char * const uart_parents[] = {
+ "clk26m",
+ "univpll2_d8"
+};
+
+static const char * const spi_parents[] = {
+ "clk26m",
+ "syspll3_d2",
+ "syspll4_d2",
+ "univpll2_d4",
+ "univpll1_d8"
+};
+
+static const char * const usb20_parents[] = {
+ "clk26m",
+ "univpll1_d8",
+ "univpll3_d4"
+};
+
+static const char * const msdc30_parents[] = {
+ "clk26m",
+ "msdcpll_d2",
+ "syspll2_d2",
+ "syspll1_d4",
+ "univpll1_d4",
+ "univpll2_d4"
+};
+
+static const char * const audio_parents[] = {
+ "clk26m",
+ "syspll1_d16"
+};
+
+static const char * const aud_intbus_parents[] = {
+ "clk26m",
+ "syspll1_d4",
+ "syspll3_d2",
+ "syspll4_d2",
+ "univpll3_d2",
+ "univpll2_d4"
+};
+
+static const char * const pmicspi_parents[] = {
+ "clk26m",
+ "syspll1_d8",
+ "syspll2_d4",
+ "syspll4_d2",
+ "syspll3_d4",
+ "syspll2_d8",
+ "syspll1_d16",
+ "univpll3_d4",
+ "univpll_d26",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const scp_parents[] = {
+ "clk26m",
+ "syspll1_d8",
+ "dmpll_d2",
+ "dmpll_d4"
+};
+
+static const char * const dpi0_parents[] = {
+ "clk26m",
+ "mipipll",
+ "mipipll_d2",
+ "mipipll_d4",
+ "clk26m",
+ "tvdpll_ck",
+ "tvdpll_d2",
+ "tvdpll_d4"
+};
+
+static const char * const dpi1_parents[] = {
+ "clk26m",
+ "tvdpll_ck",
+ "tvdpll_d2",
+ "tvdpll_d4"
+};
+
+static const char * const tve_parents[] = {
+ "clk26m",
+ "mipipll",
+ "mipipll_d2",
+ "mipipll_d4",
+ "clk26m",
+ "tvdpll_ck",
+ "tvdpll_d2",
+ "tvdpll_d4"
+};
+
+static const char * const hdmi_parents[] = {
+ "clk26m",
+ "hdmipll_ck",
+ "hdmipll_d2",
+ "hdmipll_d3"
+};
+
+static const char * const apll_parents[] = {
+ "clk26m",
+ "audpll",
+ "audpll_d4",
+ "audpll_d8",
+ "audpll_d16",
+ "audpll_d24",
+ "clk26m",
+ "clk26m"
+};
+
+static const char * const rtc_parents[] = {
+ "32k_internal",
+ "32k_external",
+ "clk26m",
+ "univpll3_d8"
+};
+
+static const char * const nfi2x_parents[] = {
+ "clk26m",
+ "syspll2_d2",
+ "syspll_d7",
+ "univpll3_d2",
+ "syspll2_d4",
+ "univpll3_d4",
+ "syspll4_d4",
+ "clk26m"
+};
+
+static const char * const emmc_hclk_parents[] = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll1_d4",
+ "syspll2_d2"
+};
+
+static const char * const flash_parents[] = {
+ "clk26m_d8",
+ "clk26m",
+ "syspll2_d8",
+ "syspll3_d4",
+ "univpll3_d4",
+ "syspll4_d2",
+ "syspll2_d4",
+ "univpll2_d4"
+};
+
+static const char * const di_parents[] = {
+ "clk26m",
+ "tvd2pll_ck",
+ "tvd2pll_d2",
+ "clk26m"
+};
+
+static const char * const nr_osd_parents[] = {
+ "clk26m",
+ "vencpll_ck",
+ "syspll1_d2",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll1_d2",
+ "univpll2_d2",
+ "dmpll_ck"
+};
+
+static const char * const hdmirx_bist_parents[] = {
+ "clk26m",
+ "syspll_d3",
+ "clk26m",
+ "syspll1_d16",
+ "syspll4_d2",
+ "syspll1_d4",
+ "vencpll_ck",
+ "clk26m"
+};
+
+static const char * const intdir_parents[] = {
+ "clk26m",
+ "mmpll_ck",
+ "syspll_d2",
+ "univpll_d2"
+};
+
+static const char * const asm_parents[] = {
+ "clk26m",
+ "univpll2_d4",
+ "univpll2_d2",
+ "syspll_d5"
+};
+
+static const char * const ms_card_parents[] = {
+ "clk26m",
+ "univpll3_d8",
+ "syspll4_d4"
+};
+
+static const char * const ethif_parents[] = {
+ "clk26m",
+ "syspll1_d2",
+ "syspll_d5",
+ "syspll1_d4",
+ "univpll_d5",
+ "univpll1_d2",
+ "dmpll_ck",
+ "dmpll_d2"
+};
+
+static const char * const hdmirx_parents[] = {
+ "clk26m",
+ "univpll_d52"
+};
+
+static const char * const cmsys_parents[] = {
+ "clk26m",
+ "syspll1_d2",
+ "univpll1_d2",
+ "univpll_d5",
+ "syspll_d5",
+ "syspll2_d2",
+ "syspll1_d4",
+ "syspll3_d2",
+ "syspll2_d4",
+ "syspll1_d8",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m",
+ "clk26m"
+};
+
+static const char * const clk_8bdac_parents[] = {
+ "32k_internal",
+ "8bdac_ck",
+ "clk26m",
+ "clk26m"
+};
+
+static const char * const aud2dvd_parents[] = {
+ "a1sys_hp_ck",
+ "a2sys_hp_ck"
+};
+
+static const char * const padmclk_parents[] = {
+ "clk26m",
+ "univpll_d26",
+ "univpll_d52",
+ "univpll_d108",
+ "univpll2_d8",
+ "univpll2_d16",
+ "univpll2_d32"
+};
+
+static const char * const aud_mux_parents[] = {
+ "clk26m",
+ "aud1pll_98m_ck",
+ "aud2pll_90m_ck",
+ "hadds2pll_98m",
+ "audio_ext1_ck",
+ "audio_ext2_ck"
+};
+
+static const char * const aud_src_parents[] = {
+ "aud_mux1_sel",
+ "aud_mux2_sel"
+};
+
+static const char * const cpu_parents[] = {
+ "clk26m",
+ "armpll",
+ "mainpll",
+ "mmpll"
+};
+
+static const struct mtk_composite top_muxes[] = {
+ MUX_GATE_FLAGS(CLK_TOP_AXI_SEL, "axi_sel", axi_parents,
+ 0x0040, 0, 3, 7, CLK_IS_CRITICAL),
+ MUX_GATE_FLAGS(CLK_TOP_MEM_SEL, "mem_sel", mem_parents,
+ 0x0040, 8, 1, 15, CLK_IS_CRITICAL),
+ MUX_GATE_FLAGS(CLK_TOP_DDRPHYCFG_SEL, "ddrphycfg_sel",
+ ddrphycfg_parents, 0x0040, 16, 1, 23, CLK_IS_CRITICAL),
+ MUX_GATE(CLK_TOP_MM_SEL, "mm_sel", mm_parents,
+ 0x0040, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents,
+ 0x0050, 0, 2, 7),
+ MUX_GATE(CLK_TOP_VDEC_SEL, "vdec_sel", vdec_parents,
+ 0x0050, 8, 4, 15),
+ MUX_GATE(CLK_TOP_MFG_SEL, "mfg_sel", mfg_parents,
+ 0x0050, 16, 3, 23),
+ MUX_GATE(CLK_TOP_CAMTG_SEL, "camtg_sel", camtg_parents,
+ 0x0050, 24, 3, 31),
+ MUX_GATE(CLK_TOP_UART_SEL, "uart_sel", uart_parents,
+ 0x0060, 0, 1, 7),
+
+ MUX_GATE(CLK_TOP_SPI0_SEL, "spi0_sel", spi_parents,
+ 0x0060, 8, 3, 15),
+ MUX_GATE(CLK_TOP_USB20_SEL, "usb20_sel", usb20_parents,
+ 0x0060, 16, 2, 23),
+ MUX_GATE(CLK_TOP_MSDC30_0_SEL, "msdc30_0_sel", msdc30_parents,
+ 0x0060, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_parents,
+ 0x0070, 0, 3, 7),
+ MUX_GATE(CLK_TOP_MSDC30_2_SEL, "msdc30_2_sel", msdc30_parents,
+ 0x0070, 8, 3, 15),
+ MUX_GATE(CLK_TOP_AUDIO_SEL, "audio_sel", msdc30_parents,
+ 0x0070, 16, 1, 23),
+ MUX_GATE(CLK_TOP_AUDINTBUS_SEL, "aud_intbus_sel", aud_intbus_parents,
+ 0x0070, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents,
+ 0x0080, 0, 4, 7),
+ MUX_GATE(CLK_TOP_SCP_SEL, "scp_sel", scp_parents,
+ 0x0080, 8, 2, 15),
+ MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents,
+ 0x0080, 16, 3, 23),
+ MUX_GATE(CLK_TOP_DPI1_SEL, "dpi1_sel", dpi1_parents,
+ 0x0080, 24, 2, 31),
+
+ MUX_GATE(CLK_TOP_TVE_SEL, "tve_sel", tve_parents,
+ 0x0090, 0, 3, 7),
+ MUX_GATE(CLK_TOP_HDMI_SEL, "hdmi_sel", hdmi_parents,
+ 0x0090, 8, 2, 15),
+ MUX_GATE(CLK_TOP_APLL_SEL, "apll_sel", apll_parents,
+ 0x0090, 16, 3, 23),
+
+ MUX_GATE_FLAGS(CLK_TOP_RTC_SEL, "rtc_sel", rtc_parents,
+ 0x00A0, 0, 2, 7, CLK_IS_CRITICAL),
+ MUX_GATE(CLK_TOP_NFI2X_SEL, "nfi2x_sel", nfi2x_parents,
+ 0x00A0, 8, 3, 15),
+ MUX_GATE(CLK_TOP_EMMC_HCLK_SEL, "emmc_hclk_sel", emmc_hclk_parents,
+ 0x00A0, 24, 2, 31),
+
+ MUX_GATE(CLK_TOP_FLASH_SEL, "flash_sel", flash_parents,
+ 0x00B0, 0, 3, 7),
+ MUX_GATE(CLK_TOP_DI_SEL, "di_sel", di_parents,
+ 0x00B0, 8, 2, 15),
+ MUX_GATE(CLK_TOP_NR_SEL, "nr_sel", nr_osd_parents,
+ 0x00B0, 16, 3, 23),
+ MUX_GATE(CLK_TOP_OSD_SEL, "osd_sel", nr_osd_parents,
+ 0x00B0, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_HDMIRX_BIST_SEL, "hdmirx_bist_sel",
+ hdmirx_bist_parents, 0x00C0, 0, 3, 7),
+ MUX_GATE(CLK_TOP_INTDIR_SEL, "intdir_sel", intdir_parents,
+ 0x00C0, 8, 2, 15),
+ MUX_GATE(CLK_TOP_ASM_I_SEL, "asm_i_sel", asm_parents,
+ 0x00C0, 16, 2, 23),
+ MUX_GATE(CLK_TOP_ASM_M_SEL, "asm_m_sel", asm_parents,
+ 0x00C0, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_ASM_H_SEL, "asm_h_sel", asm_parents,
+ 0x00D0, 0, 2, 7),
+ MUX_GATE(CLK_TOP_MS_CARD_SEL, "ms_card_sel", ms_card_parents,
+ 0x00D0, 16, 2, 23),
+ MUX_GATE(CLK_TOP_ETHIF_SEL, "ethif_sel", ethif_parents,
+ 0x00D0, 24, 3, 31),
+
+ MUX_GATE(CLK_TOP_HDMIRX26_24_SEL, "hdmirx26_24_sel", hdmirx_parents,
+ 0x00E0, 0, 1, 7),
+ MUX_GATE(CLK_TOP_MSDC30_3_SEL, "msdc30_3_sel", msdc30_parents,
+ 0x00E0, 8, 3, 15),
+ MUX_GATE(CLK_TOP_CMSYS_SEL, "cmsys_sel", cmsys_parents,
+ 0x00E0, 16, 4, 23),
+
+ MUX_GATE(CLK_TOP_SPI1_SEL, "spi2_sel", spi_parents,
+ 0x00E0, 24, 3, 31),
+ MUX_GATE(CLK_TOP_SPI2_SEL, "spi1_sel", spi_parents,
+ 0x00F0, 0, 3, 7),
+ MUX_GATE(CLK_TOP_8BDAC_SEL, "8bdac_sel", clk_8bdac_parents,
+ 0x00F0, 8, 2, 15),
+ MUX_GATE(CLK_TOP_AUD2DVD_SEL, "aud2dvd_sel", aud2dvd_parents,
+ 0x00F0, 16, 1, 23),
+
+ MUX(CLK_TOP_PADMCLK_SEL, "padmclk_sel", padmclk_parents,
+ 0x0100, 0, 3),
+
+ MUX(CLK_TOP_AUD_MUX1_SEL, "aud_mux1_sel", aud_mux_parents,
+ 0x012c, 0, 3),
+ MUX(CLK_TOP_AUD_MUX2_SEL, "aud_mux2_sel", aud_mux_parents,
+ 0x012c, 3, 3),
+ MUX(CLK_TOP_AUDPLL_MUX_SEL, "audpll_sel", aud_mux_parents,
+ 0x012c, 6, 3),
+ MUX_GATE(CLK_TOP_AUD_K1_SRC_SEL, "aud_k1_src_sel", aud_src_parents,
+ 0x012c, 15, 1, 23),
+ MUX_GATE(CLK_TOP_AUD_K2_SRC_SEL, "aud_k2_src_sel", aud_src_parents,
+ 0x012c, 16, 1, 24),
+ MUX_GATE(CLK_TOP_AUD_K3_SRC_SEL, "aud_k3_src_sel", aud_src_parents,
+ 0x012c, 17, 1, 25),
+ MUX_GATE(CLK_TOP_AUD_K4_SRC_SEL, "aud_k4_src_sel", aud_src_parents,
+ 0x012c, 18, 1, 26),
+ MUX_GATE(CLK_TOP_AUD_K5_SRC_SEL, "aud_k5_src_sel", aud_src_parents,
+ 0x012c, 19, 1, 27),
+ MUX_GATE(CLK_TOP_AUD_K6_SRC_SEL, "aud_k6_src_sel", aud_src_parents,
+ 0x012c, 20, 1, 28),
+};
+
+static const struct mtk_clk_divider top_adj_divs[] = {
+ DIV_ADJ(CLK_TOP_AUD_EXTCK1_DIV, "audio_ext1_ck", "aud_ext1",
+ 0x0120, 0, 8),
+ DIV_ADJ(CLK_TOP_AUD_EXTCK2_DIV, "audio_ext2_ck", "aud_ext2",
+ 0x0120, 8, 8),
+ DIV_ADJ(CLK_TOP_AUD_MUX1_DIV, "aud_mux1_div", "aud_mux1_sel",
+ 0x0120, 16, 8),
+ DIV_ADJ(CLK_TOP_AUD_MUX2_DIV, "aud_mux2_div", "aud_mux2_sel",
+ 0x0120, 24, 8),
+ DIV_ADJ(CLK_TOP_AUD_K1_SRC_DIV, "aud_k1_src_div", "aud_k1_src_sel",
+ 0x0124, 0, 8),
+ DIV_ADJ(CLK_TOP_AUD_K2_SRC_DIV, "aud_k2_src_div", "aud_k2_src_sel",
+ 0x0124, 8, 8),
+ DIV_ADJ(CLK_TOP_AUD_K3_SRC_DIV, "aud_k3_src_div", "aud_k3_src_sel",
+ 0x0124, 16, 8),
+ DIV_ADJ(CLK_TOP_AUD_K4_SRC_DIV, "aud_k4_src_div", "aud_k4_src_sel",
+ 0x0124, 24, 8),
+ DIV_ADJ(CLK_TOP_AUD_K5_SRC_DIV, "aud_k5_src_div", "aud_k5_src_sel",
+ 0x0128, 0, 8),
+ DIV_ADJ(CLK_TOP_AUD_K6_SRC_DIV, "aud_k6_src_div", "aud_k6_src_sel",
+ 0x0128, 8, 8),
+};
+
+static const struct mtk_gate_regs top_aud_cg_regs = {
+ .sta_ofs = 0x012C,
+};
+
+#define GATE_TOP_AUD(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &top_aud_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_no_setclr, \
+ }
+
+static const struct mtk_gate top_clks[] = {
+ GATE_TOP_AUD(CLK_TOP_AUD_48K_TIMING, "a1sys_hp_ck", "aud_mux1_div",
+ 21),
+ GATE_TOP_AUD(CLK_TOP_AUD_44K_TIMING, "a2sys_hp_ck", "aud_mux2_div",
+ 22),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S1_MCLK, "aud_i2s1_mclk", "aud_k1_src_div",
+ 23),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S2_MCLK, "aud_i2s2_mclk", "aud_k2_src_div",
+ 24),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S3_MCLK, "aud_i2s3_mclk", "aud_k3_src_div",
+ 25),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S4_MCLK, "aud_i2s4_mclk", "aud_k4_src_div",
+ 26),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S5_MCLK, "aud_i2s5_mclk", "aud_k5_src_div",
+ 27),
+ GATE_TOP_AUD(CLK_TOP_AUD_I2S6_MCLK, "aud_i2s6_mclk", "aud_k6_src_div",
+ 28),
+};
+
+static int mtk_topckgen_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ struct device_node *node = pdev->dev.of_node;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ clk_data = mtk_alloc_clk_data(CLK_TOP_NR);
+
+ mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
+ clk_data);
+
+ mtk_clk_register_factors(top_fixed_divs, ARRAY_SIZE(top_fixed_divs),
+ clk_data);
+
+ mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
+ base, &mt2701_clk_lock, clk_data);
+
+ mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
+ base, &mt2701_clk_lock, clk_data);
+
+ mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
+ clk_data);
+
+ return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+}
+
+static const struct mtk_gate_regs infra_cg_regs = {
+ .set_ofs = 0x0040,
+ .clr_ofs = 0x0044,
+ .sta_ofs = 0x0048,
+};
+
+#define GATE_ICG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &infra_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate infra_clks[] = {
+ GATE_ICG(CLK_INFRA_DBG, "dbgclk", "axi_sel", 0),
+ GATE_ICG(CLK_INFRA_SMI, "smi_ck", "mm_sel", 1),
+ GATE_ICG(CLK_INFRA_QAXI_CM4, "cm4_ck", "axi_sel", 2),
+ GATE_ICG(CLK_INFRA_AUD_SPLIN_B, "audio_splin_bck", "hadds2pll_294m", 4),
+ GATE_ICG(CLK_INFRA_AUDIO, "audio_ck", "clk26m", 5),
+ GATE_ICG(CLK_INFRA_EFUSE, "efuse_ck", "clk26m", 6),
+ GATE_ICG(CLK_INFRA_L2C_SRAM, "l2c_sram_ck", "mm_sel", 7),
+ GATE_ICG(CLK_INFRA_M4U, "m4u_ck", "mem_sel", 8),
+ GATE_ICG(CLK_INFRA_CONNMCU, "connsys_bus", "wbg_dig_ck_416m", 12),
+ GATE_ICG(CLK_INFRA_TRNG, "trng_ck", "axi_sel", 13),
+ GATE_ICG(CLK_INFRA_RAMBUFIF, "rambufif_ck", "mem_sel", 14),
+ GATE_ICG(CLK_INFRA_CPUM, "cpum_ck", "mem_sel", 15),
+ GATE_ICG(CLK_INFRA_KP, "kp_ck", "axi_sel", 16),
+ GATE_ICG(CLK_INFRA_CEC, "cec_ck", "rtc_sel", 18),
+ GATE_ICG(CLK_INFRA_IRRX, "irrx_ck", "axi_sel", 19),
+ GATE_ICG(CLK_INFRA_PMICSPI, "pmicspi_ck", "pmicspi_sel", 22),
+ GATE_ICG(CLK_INFRA_PMICWRAP, "pmicwrap_ck", "axi_sel", 23),
+ GATE_ICG(CLK_INFRA_DDCCI, "ddcci_ck", "axi_sel", 24),
+};
+
+static const struct mtk_fixed_factor infra_fixed_divs[] = {
+ FACTOR(CLK_INFRA_CLK_13M, "clk13m", "clk26m", 1, 2),
+};
+
+static struct clk_onecell_data *infra_clk_data;
+
+static void mtk_infrasys_init_early(struct device_node *node)
+{
+ int r, i;
+
+ if (!infra_clk_data) {
+ infra_clk_data = mtk_alloc_clk_data(CLK_INFRA_NR);
+
+ for (i = 0; i < CLK_INFRA_NR; i++)
+ infra_clk_data->clks[i] = ERR_PTR(-EPROBE_DEFER);
+ }
+
+ mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
+ infra_clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, infra_clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE_DRIVER(mtk_infra, "mediatek,mt2701-infracfg",
+ mtk_infrasys_init_early);
+
+static int mtk_infrasys_init(struct platform_device *pdev)
+{
+ int r, i;
+ struct device_node *node = pdev->dev.of_node;
+
+ if (!infra_clk_data) {
+ infra_clk_data = mtk_alloc_clk_data(CLK_INFRA_NR);
+ } else {
+ for (i = 0; i < CLK_INFRA_NR; i++) {
+ if (infra_clk_data->clks[i] == ERR_PTR(-EPROBE_DEFER))
+ infra_clk_data->clks[i] = ERR_PTR(-ENOENT);
+ }
+ }
+
+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+ infra_clk_data);
+ mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
+ infra_clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, infra_clk_data);
+
+ return r;
+}
+
+static const struct mtk_gate_regs peri0_cg_regs = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x0010,
+ .sta_ofs = 0x0018,
+};
+
+static const struct mtk_gate_regs peri1_cg_regs = {
+ .set_ofs = 0x000c,
+ .clr_ofs = 0x0014,
+ .sta_ofs = 0x001c,
+};
+
+#define GATE_PERI0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_PERI1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &peri1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate peri_clks[] = {
+ GATE_PERI0(CLK_PERI_USB0_MCU, "usb0_mcu_ck", "axi_sel", 31),
+ GATE_PERI0(CLK_PERI_ETH, "eth_ck", "clk26m", 30),
+ GATE_PERI0(CLK_PERI_SPI0, "spi0_ck", "spi0_sel", 29),
+ GATE_PERI0(CLK_PERI_AUXADC, "auxadc_ck", "clk26m", 28),
+ GATE_PERI0(CLK_PERI_I2C3, "i2c3_ck", "clk26m", 27),
+ GATE_PERI0(CLK_PERI_I2C2, "i2c2_ck", "axi_sel", 26),
+ GATE_PERI0(CLK_PERI_I2C1, "i2c1_ck", "axi_sel", 25),
+ GATE_PERI0(CLK_PERI_I2C0, "i2c0_ck", "axi_sel", 24),
+ GATE_PERI0(CLK_PERI_BTIF, "bitif_ck", "axi_sel", 23),
+ GATE_PERI0(CLK_PERI_UART3, "uart3_ck", "axi_sel", 22),
+ GATE_PERI0(CLK_PERI_UART2, "uart2_ck", "axi_sel", 21),
+ GATE_PERI0(CLK_PERI_UART1, "uart1_ck", "axi_sel", 20),
+ GATE_PERI0(CLK_PERI_UART0, "uart0_ck", "axi_sel", 19),
+ GATE_PERI0(CLK_PERI_NLI, "nli_ck", "axi_sel", 18),
+ GATE_PERI0(CLK_PERI_MSDC50_3, "msdc50_3_ck", "emmc_hclk_sel", 17),
+ GATE_PERI0(CLK_PERI_MSDC30_3, "msdc30_3_ck", "msdc30_3_sel", 16),
+ GATE_PERI0(CLK_PERI_MSDC30_2, "msdc30_2_ck", "msdc30_2_sel", 15),
+ GATE_PERI0(CLK_PERI_MSDC30_1, "msdc30_1_ck", "msdc30_1_sel", 14),
+ GATE_PERI0(CLK_PERI_MSDC30_0, "msdc30_0_ck", "msdc30_0_sel", 13),
+ GATE_PERI0(CLK_PERI_AP_DMA, "ap_dma_ck", "axi_sel", 12),
+ GATE_PERI0(CLK_PERI_USB1, "usb1_ck", "usb20_sel", 11),
+ GATE_PERI0(CLK_PERI_USB0, "usb0_ck", "usb20_sel", 10),
+ GATE_PERI0(CLK_PERI_PWM, "pwm_ck", "axi_sel", 9),
+ GATE_PERI0(CLK_PERI_PWM7, "pwm7_ck", "axi_sel", 8),
+ GATE_PERI0(CLK_PERI_PWM6, "pwm6_ck", "axi_sel", 7),
+ GATE_PERI0(CLK_PERI_PWM5, "pwm5_ck", "axi_sel", 6),
+ GATE_PERI0(CLK_PERI_PWM4, "pwm4_ck", "axi_sel", 5),
+ GATE_PERI0(CLK_PERI_PWM3, "pwm3_ck", "axi_sel", 4),
+ GATE_PERI0(CLK_PERI_PWM2, "pwm2_ck", "axi_sel", 3),
+ GATE_PERI0(CLK_PERI_PWM1, "pwm1_ck", "axi_sel", 2),
+ GATE_PERI0(CLK_PERI_THERM, "therm_ck", "axi_sel", 1),
+ GATE_PERI0(CLK_PERI_NFI, "nfi_ck", "nfi2x_sel", 0),
+
+ GATE_PERI1(CLK_PERI_FCI, "fci_ck", "ms_card_sel", 11),
+ GATE_PERI1(CLK_PERI_SPI2, "spi2_ck", "spi2_sel", 10),
+ GATE_PERI1(CLK_PERI_SPI1, "spi1_ck", "spi1_sel", 9),
+ GATE_PERI1(CLK_PERI_HOST89_DVD, "host89_dvd_ck", "aud2dvd_sel", 8),
+ GATE_PERI1(CLK_PERI_HOST89_SPI, "host89_spi_ck", "spi0_sel", 7),
+ GATE_PERI1(CLK_PERI_HOST89_INT, "host89_int_ck", "axi_sel", 6),
+ GATE_PERI1(CLK_PERI_FLASH, "flash_ck", "nfi2x_sel", 5),
+ GATE_PERI1(CLK_PERI_NFI_PAD, "nfi_pad_ck", "nfi1x_pad", 4),
+ GATE_PERI1(CLK_PERI_NFI_ECC, "nfi_ecc_ck", "nfi1x_pad", 3),
+ GATE_PERI1(CLK_PERI_GCPU, "gcpu_ck", "axi_sel", 2),
+ GATE_PERI1(CLK_PERI_USB_SLV, "usbslv_ck", "axi_sel", 1),
+ GATE_PERI1(CLK_PERI_USB1_MCU, "usb1_mcu_ck", "axi_sel", 0),
+};
+
+static const char * const uart_ck_sel_parents[] = {
+ "clk26m",
+ "uart_sel",
+};
+
+static const struct mtk_composite peri_muxs[] = {
+ MUX(CLK_PERI_UART0_SEL, "uart0_ck_sel", uart_ck_sel_parents,
+ 0x40c, 0, 1),
+ MUX(CLK_PERI_UART1_SEL, "uart1_ck_sel", uart_ck_sel_parents,
+ 0x40c, 1, 1),
+ MUX(CLK_PERI_UART2_SEL, "uart2_ck_sel", uart_ck_sel_parents,
+ 0x40c, 2, 1),
+ MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents,
+ 0x40c, 3, 1),
+};
+
+static int mtk_pericfg_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ int r;
+ struct device_node *node = pdev->dev.of_node;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ clk_data = mtk_alloc_clk_data(CLK_PERI_NR);
+
+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
+ clk_data);
+
+ mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base,
+ &mt2701_clk_lock, clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return r;
+}
+
+#define MT8590_PLL_FMAX (2000 * MHZ)
+#define CON0_MT8590_RST_BAR BIT(27)
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, \
+ _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift) { \
+ .id = _id, \
+ .name = _name, \
+ .reg = _reg, \
+ .pwr_reg = _pwr_reg, \
+ .en_mask = _en_mask, \
+ .flags = _flags, \
+ .rst_bar_mask = CON0_MT8590_RST_BAR, \
+ .fmax = MT8590_PLL_FMAX, \
+ .pcwbits = _pcwbits, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .tuner_reg = _tuner_reg, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ }
+
+static const struct mtk_pll_data apmixed_plls[] = {
+ PLL(CLK_APMIXED_ARMPLL, "armpll", 0x200, 0x20c, 0x80000001,
+ PLL_AO, 21, 0x204, 24, 0x0, 0x204, 0),
+ PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x210, 0x21c, 0xf0000001,
+ HAVE_RST_BAR, 21, 0x210, 4, 0x0, 0x214, 0),
+ PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x220, 0x22c, 0xf3000001,
+ HAVE_RST_BAR, 7, 0x220, 4, 0x0, 0x224, 14),
+ PLL(CLK_APMIXED_MMPLL, "mmpll", 0x230, 0x23c, 0x00000001, 0,
+ 21, 0x230, 4, 0x0, 0x234, 0),
+ PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x240, 0x24c, 0x00000001, 0,
+ 21, 0x240, 4, 0x0, 0x244, 0),
+ PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x250, 0x25c, 0x00000001, 0,
+ 21, 0x250, 4, 0x0, 0x254, 0),
+ PLL(CLK_APMIXED_AUD1PLL, "aud1pll", 0x270, 0x27c, 0x00000001, 0,
+ 31, 0x270, 4, 0x0, 0x274, 0),
+ PLL(CLK_APMIXED_TRGPLL, "trgpll", 0x280, 0x28c, 0x00000001, 0,
+ 31, 0x280, 4, 0x0, 0x284, 0),
+ PLL(CLK_APMIXED_ETHPLL, "ethpll", 0x290, 0x29c, 0x00000001, 0,
+ 31, 0x290, 4, 0x0, 0x294, 0),
+ PLL(CLK_APMIXED_VDECPLL, "vdecpll", 0x2a0, 0x2ac, 0x00000001, 0,
+ 31, 0x2a0, 4, 0x0, 0x2a4, 0),
+ PLL(CLK_APMIXED_HADDS2PLL, "hadds2pll", 0x2b0, 0x2bc, 0x00000001, 0,
+ 31, 0x2b0, 4, 0x0, 0x2b4, 0),
+ PLL(CLK_APMIXED_AUD2PLL, "aud2pll", 0x2c0, 0x2cc, 0x00000001, 0,
+ 31, 0x2c0, 4, 0x0, 0x2c4, 0),
+ PLL(CLK_APMIXED_TVD2PLL, "tvd2pll", 0x2d0, 0x2dc, 0x00000001, 0,
+ 21, 0x2d0, 4, 0x0, 0x2d4, 0),
+};
+
+static int mtk_apmixedsys_init(struct platform_device *pdev)
+{
+ struct clk_onecell_data *clk_data;
+ struct device_node *node = pdev->dev.of_node;
+
+ clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR);
+ if (!clk_data)
+ return -ENOMEM;
+
+ mtk_clk_register_plls(node, apmixed_plls, ARRAY_SIZE(apmixed_plls),
+ clk_data);
+
+ return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+}
+
+static const struct of_device_id of_match_clk_mt2701[] = {
+ {
+ .compatible = "mediatek,mt2701-topckgen",
+ .data = mtk_topckgen_init,
+ }, {
+ .compatible = "mediatek,mt2701-infracfg",
+ .data = mtk_infrasys_init,
+ }, {
+ .compatible = "mediatek,mt2701-pericfg",
+ .data = mtk_pericfg_init,
+ }, {
+ .compatible = "mediatek,mt2701-apmixedsys",
+ .data = mtk_apmixedsys_init,
+ }, {
+ /* sentinel */
+ }
+};
+
+static int clk_mt2701_probe(struct platform_device *pdev)
+{
+ int (*clk_init)(struct platform_device *);
+ int r;
+
+ clk_init = of_device_get_match_data(&pdev->dev);
+ if (!clk_init)
+ return -EINVAL;
+
+ r = clk_init(pdev);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_mt2701_drv = {
+ .probe = clk_mt2701_probe,
+ .driver = {
+ .name = "clk-mt2701",
+ .of_match_table = of_match_clk_mt2701,
+ },
+};
+
+static int __init clk_mt2701_init(void)
+{
+ return platform_driver_register(&clk_mt2701_drv);
+}
+
+arch_initcall(clk_mt2701_init);
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
index bb30f70..0541df7 100644
--- a/drivers/clk/mediatek/clk-mtk.c
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -58,6 +58,9 @@ void mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks,
for (i = 0; i < num; i++) {
const struct mtk_fixed_clk *rc = &clks[i];
+ if (clk_data && !IS_ERR_OR_NULL(clk_data->clks[rc->id]))
+ continue;
+
clk = clk_register_fixed_rate(NULL, rc->name, rc->parent, 0,
rc->rate);
@@ -81,6 +84,9 @@ void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
for (i = 0; i < num; i++) {
const struct mtk_fixed_factor *ff = &clks[i];
+ if (clk_data && !IS_ERR_OR_NULL(clk_data->clks[ff->id]))
+ continue;
+
clk = clk_register_fixed_factor(NULL, ff->name, ff->parent_name,
CLK_SET_RATE_PARENT, ff->mult, ff->div);
@@ -116,6 +122,9 @@ int mtk_clk_register_gates(struct device_node *node,
for (i = 0; i < num; i++) {
const struct mtk_gate *gate = &clks[i];
+ if (!IS_ERR_OR_NULL(clk_data->clks[gate->id]))
+ continue;
+
clk = mtk_clk_register_gate(gate->name, gate->parent_name,
regmap,
gate->regs->set_ofs,
@@ -232,6 +241,9 @@ void mtk_clk_register_composites(const struct mtk_composite *mcs,
for (i = 0; i < num; i++) {
const struct mtk_composite *mc = &mcs[i];
+ if (clk_data && !IS_ERR_OR_NULL(clk_data->clks[mc->id]))
+ continue;
+
clk = mtk_clk_register_composite(mc, base, lock);
if (IS_ERR(clk)) {
@@ -244,3 +256,31 @@ void mtk_clk_register_composites(const struct mtk_composite *mcs,
clk_data->clks[mc->id] = clk;
}
}
+
+void mtk_clk_register_dividers(const struct mtk_clk_divider *mcds,
+ int num, void __iomem *base, spinlock_t *lock,
+ struct clk_onecell_data *clk_data)
+{
+ struct clk *clk;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ const struct mtk_clk_divider *mcd = &mcds[i];
+
+ if (clk_data && !IS_ERR_OR_NULL(clk_data->clks[mcd->id]))
+ continue;
+
+ clk = clk_register_divider(NULL, mcd->name, mcd->parent_name,
+ mcd->flags, base + mcd->div_reg, mcd->div_shift,
+ mcd->div_width, mcd->clk_divider_flags, lock);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ mcd->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[mcd->id] = clk;
+ }
+}
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 9f24fcf..f5d6b70 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -87,7 +87,8 @@ struct mtk_composite {
* In case the rate change propagation to parent clocks is undesirable,
* this macro allows to specify the clock flags manually.
*/
-#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) { \
+#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, \
+ _gate, _flags) { \
.id = _id, \
.name = _name, \
.mux_reg = _reg, \
@@ -106,7 +107,8 @@ struct mtk_composite {
* parent clock by default.
*/
#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) \
- MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT)
+ MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, \
+ _gate, CLK_SET_RATE_PARENT)
#define MUX(_id, _name, _parents, _reg, _shift, _width) { \
.id = _id, \
@@ -121,7 +123,8 @@ struct mtk_composite {
.flags = CLK_SET_RATE_PARENT, \
}
-#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, _div_width, _div_shift) { \
+#define DIV_GATE(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, \
+ _div_width, _div_shift) { \
.id = _id, \
.parent = _parent, \
.name = _name, \
@@ -156,12 +159,40 @@ struct mtk_gate {
const struct clk_ops *ops;
};
-int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks,
- int num, struct clk_onecell_data *clk_data);
+int mtk_clk_register_gates(struct device_node *node,
+ const struct mtk_gate *clks, int num,
+ struct clk_onecell_data *clk_data);
+
+struct mtk_clk_divider {
+ int id;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+
+ u32 div_reg;
+ unsigned char div_shift;
+ unsigned char div_width;
+ unsigned char clk_divider_flags;
+ const struct clk_div_table *clk_div_table;
+};
+
+#define DIV_ADJ(_id, _name, _parent, _reg, _shift, _width) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .div_reg = _reg, \
+ .div_shift = _shift, \
+ .div_width = _width, \
+}
+
+void mtk_clk_register_dividers(const struct mtk_clk_divider *mcds,
+ int num, void __iomem *base, spinlock_t *lock,
+ struct clk_onecell_data *clk_data);
struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num);
#define HAVE_RST_BAR BIT(0)
+#define PLL_AO BIT(1)
struct mtk_pll_div_table {
u32 div;
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 0c2deac..a409142 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -301,6 +301,7 @@ static struct clk *mtk_clk_register_pll(const struct mtk_pll_data *data,
pll->data = data;
init.name = data->name;
+ init.flags = (data->flags & PLL_AO) ? CLK_IS_CRITICAL : 0;
init.ops = &mtk_pll_ops;
init.parent_names = &parent_name;
init.num_parents = 1;
--
1.9.1
^ permalink raw reply related
* [PATCH v15 0/4] Add clock support for Mediatek MT2701
From: Erin Lo @ 2016-11-04 7:43 UTC (permalink / raw)
To: linux-arm-kernel
This series is based on v4.9-rc1, add clock and reset controller support
for Mediatek MT2701.
changes since v14:
- Correct commit messages of dts.
- Refine style of init/probe functions.
- Get reg addresses from platform_get_resouce() and devm_ioremap_resource().
- Minor coding style changes.
changes since v13:
- Rebase to v4.9-rc1.
changes since v12:
- Rebase to clk-next.
- Use CLK_OF_DECLARE_DRIVER() instead of CLK_OF_DECLARE().
- Use dev_* and devm_* APIs instead of pr_* and ioremap().
- Refine init functions. Share error messages in common probe().
- Fix null pointer checking for clk_data.
changes since v11:
- Rebase to clk-next.
- Return error code from probe() if clock registration fail.
changes since v10:
- Remove COMMON_CLK dependency from clk/mediatek/Kconfig.
changes since v9:
- Rebase to v4.8-rc1.
- Drop a fix patch of parent clock initial state. It will be replaced by a new
patch from Mike/Stephen.
- Replace clk.h with clk-provider.h.
- Correct register settings of clocks.
changes since v8:
- Rebase to v4.7-rc1.
- Include mt2701-resets.h in mt2701.dtsi.
- Remove an unused property from apmixedsys DT node.
changes since v7:
- Rebase to clk-next.
- Implement subsystem clocks in seperated files.
- Replace critical clock enabling with CLK_IS_CRITICAL flag.
- Reduce most clock registrations in CLK_OF_DECLARE().
- Remove __init and __initconst from most init fucntions and data,
and replace driver registration with platform_driver_register().
- Replace some common function or variable names with unique names.
- Use real clock for UARTs.
changes since v6:
- Rebase to v4.6-rc1.
- Register subsystem clocks in probe() instead of CLK_OF_DECLARE().
- Add clocks that referred by subsystem clocks.
- Fix clk_data size of apmixedsys.
- Add config options for each subsystem clock provider.
changes since v5:
- Rebase to v4.5-rc1 and [1].
- Enable critical clocks for MT2701
- Refine dt-binding documents, add reset controller support for hifsys.
changes since v4:
- Rebase to v4.5-rc1.
- Remove CLK_SET_RATE_PARENT from divider flags.
- Add img_jpgdec_smi clock.
- Move clk/mediatek/Kconfig into menu section in clk/Kconfig.
changes since v3:
- Change the parent of mm_mdp_bls_26m from clk26m to pwm_sel.
changes since v2:
- Fix ethsys definition.
- Replace read-modify-write with regmap_update_bits() in clock operations.
- Move mt2701-resets.h to include/dt-bindings/reset/.
- Add hifsys reset patch from John Crispin.
changes since v1:
- Document MT2701 compatible strings.
[1] https://patchwork.kernel.org/patch/8147901/
Erin Lo (1):
arm: dts: mt2701: Use real clock for UARTs
James Liao (1):
arm: dts: mt2701: Add clock controller device nodes
Shunli Wang (2):
clk: mediatek: Add MT2701 clock support
reset: mediatek: Add MT2701 reset driver
arch/arm/boot/dts/mt2701.dtsi | 50 +-
drivers/clk/mediatek/Kconfig | 43 ++
drivers/clk/mediatek/Makefile | 7 +
drivers/clk/mediatek/clk-gate.c | 52 ++
drivers/clk/mediatek/clk-gate.h | 2 +
drivers/clk/mediatek/clk-mt2701-bdp.c | 138 +++++
drivers/clk/mediatek/clk-mt2701-eth.c | 80 +++
drivers/clk/mediatek/clk-mt2701-hif.c | 81 +++
drivers/clk/mediatek/clk-mt2701-img.c | 80 +++
drivers/clk/mediatek/clk-mt2701-mm.c | 123 ++++
drivers/clk/mediatek/clk-mt2701-vdec.c | 91 +++
drivers/clk/mediatek/clk-mt2701.c | 1035 ++++++++++++++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.c | 40 ++
drivers/clk/mediatek/clk-mtk.h | 41 +-
drivers/clk/mediatek/clk-pll.c | 1 +
15 files changed, 1854 insertions(+), 10 deletions(-)
create mode 100644 drivers/clk/mediatek/clk-mt2701-bdp.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-eth.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-hif.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-img.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-mm.c
create mode 100644 drivers/clk/mediatek/clk-mt2701-vdec.c
create mode 100644 drivers/clk/mediatek/clk-mt2701.c
--
1.9.1
^ permalink raw reply
* [PATCH 5/6] ARM: add low level debug uart for rk1108
From: Heiko Stuebner @ 2016-11-04 7:36 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478176941-12188-1-git-send-email-andy.yan@rock-chips.com>
Am Donnerstag, 3. November 2016, 20:42:21 CET schrieb Andy Yan:
> RK1108 UARTs are Synopsis DesignWare 8250 compatible.
> Only with different register addresses.
>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
>
> arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index d83f7c3..408540f 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -776,6 +776,30 @@ choice
> their output to the standard serial port on the RealView
> PB1176 platform.
>
> + config DEBUG_RK1108_UART0
> + bool "Kernel low-level debugging messages via Rockchip RK1108 UART0"
> + depends on ARCH_ROCKCHIP
> + select DEBUG_UART_8250
> + help
> + Say Y here if you want kernel low-level debugging support
> + on Rockchip RK1108 based platforms.
> +
> + config DEBUG_RK1108_UART1
> + bool "Kernel low-level debugging messages via Rockchip RK1108 UART1"
> + depends on ARCH_ROCKCHIP
> + select DEBUG_UART_8250
> + help
> + Say Y here if you want kernel low-level debugging support
> + on Rockchip RK1108 based platforms.
> +
> + config DEBUG_RK1108_UART2
> + bool "Kernel low-level debugging messages via Rockchip RK1108 UART2"
> + depends on ARCH_ROCKCHIP
> + select DEBUG_UART_8250
> + help
> + Say Y here if you want kernel low-level debugging support
> + on Rockchip RK1108 based platforms.
> +
are you sure, you need all 3 of them?
I.e. most Rockchip SoCs so far had one uart somewhat designated as debug uart.
Most likely due to it not having rts/cts and being used in reference
schematics, but no one ever used another uart than uart2 on previous socs. So
ideally we could check and only add uarts we actually need for now. More can
be added later anyway once boards try to use them.
Heiko
^ permalink raw reply
* [PATCH 0/4] Add SCU device node support for Exynos4
From: Marek Szyprowski @ 2016-11-04 7:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478230764-13748-1-git-send-email-pankaj.dubey@samsung.com>
Hi Pankaj,
On 2016-11-04 04:39, Pankaj Dubey wrote:
> This patch series does some cleanup for Exynos4 SoC based boards.
> We are currently statically mapping SCU SFRs in mach-exynos/exynos.c
> which can be avoided and related dependencies can be removed by introduction
> of SCU device node.
>
> This patch series is tested on Exynos4210 based Origen board for SMP boot.
>
> Pankaj Dubey (4):
> ARM: EXYNOS: Remove smp_init_cpus hook from platsmp.c
> ARM: dts: exynos: Add SCU device node to exynos4.dtsi
> ARM: EXYNOS: Remove static mapping of SCU SFR
> ARM: EXYNOS: Remove unused soc_is_exynos{4,5}
>
> arch/arm/boot/dts/exynos4.dtsi | 5 +++
> arch/arm/mach-exynos/common.h | 5 ---
> arch/arm/mach-exynos/exynos.c | 22 -------------
> arch/arm/mach-exynos/include/mach/map.h | 2 --
> arch/arm/mach-exynos/platsmp.c | 49 +++++++---------------------
> arch/arm/mach-exynos/pm.c | 14 ++++++--
> arch/arm/mach-exynos/suspend.c | 15 ++++++---
> arch/arm/plat-samsung/include/plat/map-s5p.h | 4 ---
> 8 files changed, 38 insertions(+), 78 deletions(-)
Nice cleanup! Works fine on Exynos4412-based Odroid U3 (SMP boot and S2R).
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox