* [PATCH RFC 00/12] tda998x updates
From: Russell King - ARM Linux @ 2016-11-08 18:24 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478625636.27416.7.camel@linaro.org>
On Tue, Nov 08, 2016 at 05:20:36PM +0000, Jon Medhurst (Tixy) wrote:
> On Tue, 2016-11-08 at 13:34 +0000, Russell King - ARM Linux wrote:
> > On Tue, Nov 08, 2016 at 01:32:15PM +0000, Russell King - ARM Linux wrote:
> > > Unfortunately, my drm-tda998x-devel branch is slightly out of date with
> > > these patches it's the original set of 10 patches. I've not pushed
> > > these ones out to that branch yet, as I've three additional patches on
> > > top of these which aren't "ready" for pushing out.
> >
> > Here's the delta between the branch and what I just posted:
> >
> > diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> [...]
>
> I have a working setup for HDMI audio on Juno an would like to test this
> series but am struggling to work out which patches to apply in what
> order to what branch, can you be specific? (I've tried various
> combinations of patches series from the list, drm-tda998x-devel, and the
> diff you posted)
Hmm, I guess this is going to be annoyingly rather difficult then.
The structure of my git tree is:
v4.8 ---------------- mali patch ------------------ merge --- these patches
v4.7 -- tda998x audio patches (up to df0bd1e8f3c5) --^
which makes it rather difficult to send out a series that people can
apply as patches without first replicating that merge. I guess the
answer is... use the _patches_ for review, and I'll push out the
changes into drm-tda998x-devel... should be there soon. Look for
commit hash d61fa2e50f2a. (Bah, slow 'net connections.)
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply
* [PATCH 1/3] ipmi/bt-bmc: change compatible node to 'aspeed,ast2400-ibt-bmc'
From: Corey Minyard @ 2016-11-08 18:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <a886778e-a85e-758e-3a61-c4909652e39d@kaod.org>
On 11/08/2016 09:52 AM, C?dric Le Goater wrote:
> O
snip
>>>> While we're modifying the binding, should we add a compat string for
>>>> the ast2500?
>>> Well, if the change in this patch is fine for all, may be we can add
>>> the ast2500 compat string in a followup patch ?
>> Sounds good to me.
> OK. So, how do we proceed with this patch ? Who would include it in its
> tree ?
I don't have anything for 4.9 at the moment. Arnd, if you have
something, can
you take this? Otherwise I will.
And I guess I should add:
Acked-by: Corey Minyard <cminyard@mvista.com>
-corey
> Thanks,
>
> C.
>
^ permalink raw reply
* [PATCH] ARM: davinci: enable PM for DT boot
From: Kevin Hilman @ 2016-11-08 18:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <c3a69359-bcec-40fe-e25c-048b97bab726@ti.com>
Hi Sekhar,
Sekhar Nori <nsekhar@ti.com> writes:
> On Wednesday 26 October 2016 03:17 AM, Kevin Hilman wrote:
>> Currently system PM is only enabled for legacy (non-DT) boot. Enable
>> for DT boot also.
>>
>> Tested on da850-lcdk using "rtcwake -m mem -s5 -d rtc0".
>>
>> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
>> ---
>> arch/arm/mach-davinci/da8xx-dt.c | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)
>>
>> diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
>> index c9f7e9274aa8..a8089fa40d86 100644
>> --- a/arch/arm/mach-davinci/da8xx-dt.c
>> +++ b/arch/arm/mach-davinci/da8xx-dt.c
>> @@ -43,8 +43,26 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
>>
>> #ifdef CONFIG_ARCH_DAVINCI_DA850
>>
>> +static struct davinci_pm_config da850_pm_pdata = {
>> + .sleepcount = 128,
>> +};
>> +
>> +static struct platform_device da850_pm_device = {
>> + .name = "pm-davinci",
>> + .dev = {
>> + .platform_data = &da850_pm_pdata,
>> + },
>> + .id = -1,
>> +};
>> +
>> static void __init da850_init_machine(void)
>> {
>> + int ret;
>> +
>> + ret = da850_register_pm(&da850_pm_device);
>
> I am not sure if it makes sense to keep the "pm device" around anymore.
> I think for both DT and non-DT boot, we can get rid of the fake PM
> device and combine da850_register_pm() and davinci_pm_probe() into a
> single davinci_init_suspend() function which can then be called both for
> DT and non-DT boot.
Looking closer at this, where do you propose the pdata comes from for
the non-DT boot?
It seems to me that we can't currently remove the pdata dependency
without breaking the non-DT platforms, so the approach proposed here is
the least invasive.
Once other platforms are DT converted, we could clean this up a bit
more.
Kevin
^ permalink raw reply
* [PATCH v3 1/2] arm64: Add hypervisor safe helper for checking constant capabilities
From: Will Deacon @ 2016-11-08 18:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478613381-5718-2-git-send-email-suzuki.poulose@arm.com>
On Tue, Nov 08, 2016 at 01:56:20PM +0000, Suzuki K Poulose wrote:
> The hypervisor may not have full access to the kernel data structures
> and hence cannot safely use cpus_have_cap() helper for checking the
> system capability. Add a safe helper for hypervisors to check a constant
> system capability, which *doesn't* fall back to checking the bitmap
> maintained by the kernel. With this, make the cpus_have_cap() only
> check the bitmask and force constant cap checks to use the new API
> for quicker checks.
>
> Cc: Robert Ritcher <rritcher@cavium.com>
> Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> arch/arm64/include/asm/cpufeature.h | 19 ++++++++++++-------
> arch/arm64/kernel/cpufeature.c | 2 +-
> arch/arm64/kernel/process.c | 2 +-
> drivers/irqchip/irq-gic-v3.c | 13 +------------
It might be worth having the GIC changes as a separate patch, but either
way:
Reviewed-by: Will Deacon <will.deacon@arm.com>
Will
^ permalink raw reply
* [PATCH 2/2] drivers: psci: Allow PSCI node to be disabled
From: Lorenzo Pieralisi @ 2016-11-08 17:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161108175547.31146-1-lorenzo.pieralisi@arm.com>
From: Thierry Reding <treding@nvidia.com>
Allow disabling PSCI support (mostly for testing purposes) by setting
the status property to "disabled". This makes the node behave in much
the same way as proper device nodes.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
---
drivers/firmware/psci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c
index 8263429..6c60a50 100644
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -630,7 +630,7 @@ int __init psci_dt_init(void)
np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
- if (!np)
+ if (!np || !of_device_is_available(np))
return -ENODEV;
init_fn = (psci_initcall_t)matched_np->data;
--
2.10.0
^ permalink raw reply related
* [PATCH 1/2] drivers: psci: PSCI checker module
From: Lorenzo Pieralisi @ 2016-11-08 17:55 UTC (permalink / raw)
To: linux-arm-kernel
From: Kevin Brodsky <kevin.brodsky@arm.com>
On arm and arm64, PSCI is one of the possible firmware interfaces
used for power management. This includes both turning CPUs on and off,
and suspending them (entering idle states).
This patch adds a PSCI checker module that enables basic testing of
PSCI operations during startup. There are two main tests: CPU
hotplugging and suspending.
In the hotplug tests, the hotplug API is used to turn off and on again
all CPUs in the system, and then all CPUs in each cluster, checking
the consistency of the return codes.
In the suspend tests, a high-priority thread is created on each core
and uses low-level cpuidle functionalities to enter suspend, in all
the possible states and multiple times. This should allow a maximum
number of CPUs to enter the same sleep state at the same or slightly
different time.
In essence, the suspend tests use a principle similar to that of the
intel_powerclamp driver (drivers/thermal/intel_powerclamp.c), but the
threads are only kept for the duration of the test (they are already
gone when userspace is started) and it does not require to stop/start
the tick.
While in theory power management PSCI functions (CPU_{ON,OFF,SUSPEND})
could be directly called, this proved too difficult as it would imply
the duplication of all the logic used by the kernel to allow for a
clean shutdown/bringup/suspend of the CPU (the deepest sleep states
implying potentially the shutdown of the CPU).
Note that this file cannot be compiled as a loadable module, since it
uses a number of non-exported identifiers (essentially for
PSCI-specific checks and direct use of cpuidle) and relies on the
absence of userspace to avoid races when calling hotplug and cpuidle
functions.
For now at least, CONFIG_PSCI_CHECKER is mutually exclusive with
CONFIG_TORTURE_TEST, because torture tests may also use hotplug and
cause false positives in the hotplug tests.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> [torture test config]
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
[lpieralisi: added cpuidle locking, reworded commit log/kconfig entry]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
drivers/firmware/Kconfig | 11 +
drivers/firmware/Makefile | 1 +
drivers/firmware/psci_checker.c | 490 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 502 insertions(+)
create mode 100644 drivers/firmware/psci_checker.c
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index bca172d..f358ec8 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -8,6 +8,17 @@ menu "Firmware Drivers"
config ARM_PSCI_FW
bool
+config ARM_PSCI_CHECKER
+ bool "ARM PSCI checker"
+ depends on ARM_PSCI_FW && HOTPLUG_CPU && !TORTURE_TEST
+ help
+ Run the PSCI checker during startup. This checks that hotplug and
+ suspend operations work correctly when using PSCI.
+
+ The torture tests may interfere with the PSCI checker by turning CPUs
+ on and off through hotplug, so for now torture tests and PSCI checker
+ are mutually exclusive.
+
config ARM_SCPI_PROTOCOL
tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
depends on MAILBOX
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 898ac41..cfeb7ad 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -2,6 +2,7 @@
# Makefile for the linux kernel.
#
obj-$(CONFIG_ARM_PSCI_FW) += psci.o
+obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
obj-$(CONFIG_DMI) += dmi_scan.o
diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci_checker.c
new file mode 100644
index 0000000..44bdb78
--- /dev/null
+++ b/drivers/firmware/psci_checker.c
@@ -0,0 +1,490 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2016 ARM Limited
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/atomic.h>
+#include <linux/completion.h>
+#include <linux/cpu.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/preempt.h>
+#include <linux/psci.h>
+#include <linux/slab.h>
+#include <linux/tick.h>
+#include <linux/topology.h>
+
+#include <asm/cpuidle.h>
+
+#include <uapi/linux/psci.h>
+
+#define NUM_SUSPEND_CYCLE (10)
+
+static unsigned int nb_available_cpus;
+static int tos_resident_cpu = -1;
+
+static atomic_t nb_active_threads;
+static struct completion suspend_threads_started =
+ COMPLETION_INITIALIZER(suspend_threads_started);
+static struct completion suspend_threads_done =
+ COMPLETION_INITIALIZER(suspend_threads_done);
+
+/*
+ * We assume that PSCI operations are used if they are available. This is not
+ * necessarily true on arm64, since the decision is based on the
+ * "enable-method" property of each CPU in the DT, but given that there is no
+ * arch-specific way to check this, we assume that the DT is sensible.
+ */
+static int psci_ops_check(void)
+{
+ int migrate_type = -1;
+ int cpu;
+
+ if (!(psci_ops.cpu_off && psci_ops.cpu_on && psci_ops.cpu_suspend)) {
+ pr_warn("Missing PSCI operations, aborting tests\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (psci_ops.migrate_info_type)
+ migrate_type = psci_ops.migrate_info_type();
+
+ if (migrate_type == PSCI_0_2_TOS_UP_MIGRATE ||
+ migrate_type == PSCI_0_2_TOS_UP_NO_MIGRATE) {
+ /* There is a UP Trusted OS, find on which core it resides. */
+ for_each_online_cpu(cpu)
+ if (psci_tos_resident_on(cpu)) {
+ tos_resident_cpu = cpu;
+ break;
+ }
+ if (tos_resident_cpu == -1)
+ pr_warn("UP Trusted OS resides on no online CPU\n");
+ }
+
+ return 0;
+}
+
+static int find_clusters(const struct cpumask *cpus,
+ const struct cpumask **clusters)
+{
+ unsigned int nb = 0;
+ cpumask_var_t tmp;
+
+ if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
+ return -ENOMEM;
+ cpumask_copy(tmp, cpus);
+
+ while (!cpumask_empty(tmp)) {
+ const struct cpumask *cluster =
+ topology_core_cpumask(cpumask_any(tmp));
+
+ clusters[nb++] = cluster;
+ cpumask_andnot(tmp, tmp, cluster);
+ }
+
+ free_cpumask_var(tmp);
+ return nb;
+}
+
+/*
+ * offlined_cpus is a temporary array but passing it as an argument avoids
+ * multiple allocations.
+ */
+static unsigned int down_and_up_cpus(const struct cpumask *cpus,
+ struct cpumask *offlined_cpus)
+{
+ int cpu;
+ int err = 0;
+
+ cpumask_clear(offlined_cpus);
+
+ /* Try to power down all CPUs in the mask. */
+ for_each_cpu(cpu, cpus) {
+ int ret = cpu_down(cpu);
+
+ /*
+ * cpu_down() checks the number of online CPUs before the TOS
+ * resident CPU.
+ */
+ if (cpumask_weight(offlined_cpus) + 1 == nb_available_cpus) {
+ if (ret != -EBUSY) {
+ pr_err("Unexpected return code %d while trying "
+ "to power down last online CPU %d\n",
+ ret, cpu);
+ ++err;
+ }
+ } else if (cpu == tos_resident_cpu) {
+ if (ret != -EPERM) {
+ pr_err("Unexpected return code %d while trying "
+ "to power down TOS resident CPU %d\n",
+ ret, cpu);
+ ++err;
+ }
+ } else if (ret != 0) {
+ pr_err("Error occurred (%d) while trying "
+ "to power down CPU %d\n", ret, cpu);
+ ++err;
+ }
+
+ if (ret == 0)
+ cpumask_set_cpu(cpu, offlined_cpus);
+ }
+
+ /* Try to power up all the CPUs that have been offlined. */
+ for_each_cpu(cpu, offlined_cpus) {
+ int ret = cpu_up(cpu);
+
+ if (ret != 0) {
+ pr_err("Error occurred (%d) while trying "
+ "to power up CPU %d\n", ret, cpu);
+ ++err;
+ } else {
+ cpumask_clear_cpu(cpu, offlined_cpus);
+ }
+ }
+
+ /*
+ * Something went bad at some point and some CPUs could not be turned
+ * back on.
+ */
+ WARN_ON(!cpumask_empty(offlined_cpus) ||
+ num_online_cpus() != nb_available_cpus);
+
+ return err;
+}
+
+static int hotplug_tests(void)
+{
+ int err;
+ cpumask_var_t offlined_cpus;
+ int i, nb_cluster;
+ const struct cpumask **clusters;
+ char *page_buf;
+
+ err = -ENOMEM;
+ if (!alloc_cpumask_var(&offlined_cpus, GFP_KERNEL))
+ return err;
+ /* We may have up to nb_available_cpus clusters. */
+ clusters = kmalloc_array(nb_available_cpus, sizeof(*clusters),
+ GFP_KERNEL);
+ if (!clusters)
+ goto out_free_cpus;
+ page_buf = (char *)__get_free_page(GFP_KERNEL);
+ if (!page_buf)
+ goto out_free_clusters;
+
+ err = 0;
+ nb_cluster = find_clusters(cpu_online_mask, clusters);
+
+ /*
+ * Of course the last CPU cannot be powered down and cpu_down() should
+ * refuse doing that.
+ */
+ pr_info("Trying to turn off and on again all CPUs\n");
+ err += down_and_up_cpus(cpu_online_mask, offlined_cpus);
+
+ /*
+ * Take down CPUs by cluster this time. When the last CPU is turned
+ * off, the cluster itself should shut down.
+ */
+ for (i = 0; i < nb_cluster; ++i) {
+ int cluster_id =
+ topology_physical_package_id(cpumask_any(clusters[i]));
+ ssize_t len = cpumap_print_to_pagebuf(true, page_buf,
+ clusters[i]);
+ /* Remove trailing newline. */
+ page_buf[len - 1] = '\0';
+ pr_info("Trying to turn off and on again cluster %d "
+ "(CPUs %s)\n", cluster_id, page_buf);
+ err += down_and_up_cpus(clusters[i], offlined_cpus);
+ }
+
+ free_page((unsigned long)page_buf);
+out_free_clusters:
+ kfree(clusters);
+out_free_cpus:
+ free_cpumask_var(offlined_cpus);
+ return err;
+}
+
+static void dummy_callback(unsigned long ignored) {}
+
+static int suspend_cpu(int index, bool broadcast)
+{
+ int ret;
+
+ arch_cpu_idle_enter();
+
+ if (broadcast) {
+ /*
+ * The local timer will be shut down, we need to enter tick
+ * broadcast.
+ */
+ ret = tick_broadcast_enter();
+ if (ret) {
+ /*
+ * In the absence of hardware broadcast mechanism,
+ * this CPU might be used to broadcast wakeups, which
+ * may be why entering tick broadcast has failed.
+ * There is little the kernel can do to work around
+ * that, so enter WFI instead (idle state 0).
+ */
+ cpu_do_idle();
+ ret = 0;
+ goto out_arch_exit;
+ }
+ }
+
+ /*
+ * Replicate the common ARM cpuidle enter function
+ * (arm_enter_idle_state).
+ */
+ ret = CPU_PM_CPU_IDLE_ENTER(arm_cpuidle_suspend, index);
+
+ if (broadcast)
+ tick_broadcast_exit();
+
+out_arch_exit:
+ arch_cpu_idle_exit();
+
+ return ret;
+}
+
+static int suspend_test_thread(void *arg)
+{
+ int cpu = (long)arg;
+ int i, nb_suspend = 0, nb_shallow_sleep = 0, nb_err = 0;
+ struct sched_param sched_priority = { .sched_priority = MAX_RT_PRIO-1 };
+ struct cpuidle_device *dev;
+ struct cpuidle_driver *drv;
+ /* No need for an actual callback, we just want to wake up the CPU. */
+ struct timer_list wakeup_timer =
+ TIMER_INITIALIZER(dummy_callback, 0, 0);
+
+ /* Wait for the main thread to give the start signal. */
+ wait_for_completion(&suspend_threads_started);
+
+ /* Set maximum priority to preempt all other threads on this CPU. */
+ if (sched_setscheduler_nocheck(current, SCHED_FIFO, &sched_priority))
+ pr_warn("Failed to set suspend thread scheduler on CPU %d\n",
+ cpu);
+
+ dev = this_cpu_read(cpuidle_devices);
+ drv = cpuidle_get_cpu_driver(dev);
+
+ pr_info("CPU %d entering suspend cycles, states 1 through %d\n",
+ cpu, drv->state_count - 1);
+
+ for (i = 0; i < NUM_SUSPEND_CYCLE; ++i) {
+ int index;
+ /*
+ * Test all possible states, except 0 (which is usually WFI and
+ * doesn't use PSCI).
+ */
+ for (index = 1; index < drv->state_count; ++index) {
+ struct cpuidle_state *state = &drv->states[index];
+ bool broadcast = state->flags & CPUIDLE_FLAG_TIMER_STOP;
+ int ret;
+
+ /*
+ * Set the timer to wake this CPU up in some time (which
+ * should be largely sufficient for entering suspend).
+ * If the local tick is disabled when entering suspend,
+ * suspend_cpu() takes care of switching to a broadcast
+ * tick, so the timer will still wake us up.
+ */
+ mod_timer(&wakeup_timer, jiffies +
+ usecs_to_jiffies(state->target_residency));
+
+ /* IRQs must be disabled during suspend operations. */
+ local_irq_disable();
+
+ ret = suspend_cpu(index, broadcast);
+
+ /*
+ * We have woken up. Re-enable IRQs to handle any
+ * pending interrupt, do not wait until the end of the
+ * loop.
+ */
+ local_irq_enable();
+
+ if (ret == index) {
+ ++nb_suspend;
+ } else if (ret >= 0) {
+ /* We did not enter the expected state. */
+ ++nb_shallow_sleep;
+ } else {
+ pr_err("Failed to suspend CPU %d: error %d "
+ "(requested state %d, cycle %d)\n",
+ cpu, ret, index, i);
+ ++nb_err;
+ }
+ }
+ }
+
+ /*
+ * Disable the timer to make sure that the timer will not trigger
+ * later.
+ */
+ del_timer(&wakeup_timer);
+
+ if (atomic_dec_return_relaxed(&nb_active_threads) == 0)
+ complete(&suspend_threads_done);
+
+ /* Give up on RT scheduling and wait for termination. */
+ sched_priority.sched_priority = 0;
+ if (sched_setscheduler_nocheck(current, SCHED_NORMAL, &sched_priority))
+ pr_warn("Failed to set suspend thread scheduler on CPU %d\n",
+ cpu);
+ for (;;) {
+ /* Needs to be set first to avoid missing a wakeup. */
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (kthread_should_stop()) {
+ __set_current_state(TASK_RUNNING);
+ break;
+ }
+ schedule();
+ }
+
+ pr_info("CPU %d suspend test results: success %d, shallow states %d, errors %d\n",
+ cpu, nb_suspend, nb_shallow_sleep, nb_err);
+
+ return nb_err;
+}
+
+static int suspend_tests(void)
+{
+ int i, cpu, err = 0;
+ struct task_struct **threads;
+ int nb_threads = 0;
+
+ threads = kmalloc_array(nb_available_cpus, sizeof(*threads),
+ GFP_KERNEL);
+ if (!threads)
+ return -ENOMEM;
+
+ /*
+ * Stop cpuidle to prevent the idle tasks from entering a deep sleep
+ * mode, as it might interfere with the suspend threads on other CPUs.
+ * This does not prevent the suspend threads from using cpuidle (only
+ * the idle tasks check this status). Take the idle lock so that
+ * the cpuidle driver and device look-up can be carried out safely.
+ */
+ cpuidle_pause_and_lock();
+
+ for_each_online_cpu(cpu) {
+ struct task_struct *thread;
+ /* Check that cpuidle is available on that CPU. */
+ struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu);
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
+
+ if (!dev || !drv) {
+ pr_warn("cpuidle not available on CPU %d, ignoring\n",
+ cpu);
+ continue;
+ }
+
+ thread = kthread_create_on_cpu(suspend_test_thread,
+ (void *)(long)cpu, cpu,
+ "psci_suspend_test");
+ if (IS_ERR(thread))
+ pr_err("Failed to create kthread on CPU %d\n", cpu);
+ else
+ threads[nb_threads++] = thread;
+ }
+
+ if (nb_threads < 1) {
+ err = -ENODEV;
+ goto out;
+ }
+
+ atomic_set(&nb_active_threads, nb_threads);
+
+ /*
+ * Wake up the suspend threads. To avoid the main thread being preempted
+ * before all the threads have been unparked, the suspend threads will
+ * wait for the completion of suspend_threads_started.
+ */
+ for (i = 0; i < nb_threads; ++i)
+ wake_up_process(threads[i]);
+ complete_all(&suspend_threads_started);
+
+ wait_for_completion(&suspend_threads_done);
+
+
+ /* Stop and destroy all threads, get return status. */
+ for (i = 0; i < nb_threads; ++i)
+ err += kthread_stop(threads[i]);
+ out:
+ cpuidle_resume_and_unlock();
+ kfree(threads);
+ return err;
+}
+
+static int __init psci_checker(void)
+{
+ int ret;
+
+ /*
+ * Since we're in an initcall, we assume that all the CPUs that all
+ * CPUs that can be onlined have been onlined.
+ *
+ * The tests assume that hotplug is enabled but nobody else is using it,
+ * otherwise the results will be unpredictable. However, since there
+ * is no userspace yet in initcalls, that should be fine, as long as
+ * no torture test is running@the same time (see Kconfig).
+ */
+ nb_available_cpus = num_online_cpus();
+
+ /* Check PSCI operations are set up and working. */
+ ret = psci_ops_check();
+ if (ret)
+ return ret;
+
+ pr_info("PSCI checker started using %u CPUs\n", nb_available_cpus);
+
+ pr_info("Starting hotplug tests\n");
+ ret = hotplug_tests();
+ if (ret == 0)
+ pr_info("Hotplug tests passed OK\n");
+ else if (ret > 0)
+ pr_err("%d error(s) encountered in hotplug tests\n", ret);
+ else {
+ pr_err("Out of memory\n");
+ return ret;
+ }
+
+ pr_info("Starting suspend tests (%d cycles per state)\n",
+ NUM_SUSPEND_CYCLE);
+ ret = suspend_tests();
+ if (ret == 0)
+ pr_info("Suspend tests passed OK\n");
+ else if (ret > 0)
+ pr_err("%d error(s) encountered in suspend tests\n", ret);
+ else {
+ switch (ret) {
+ case -ENOMEM:
+ pr_err("Out of memory\n");
+ break;
+ case -ENODEV:
+ pr_warn("Could not start suspend tests on any CPU\n");
+ break;
+ }
+ }
+
+ pr_info("PSCI checker completed\n");
+ return ret < 0 ? ret : 0;
+}
+late_initcall(psci_checker);
--
2.10.0
^ permalink raw reply related
* Summary of LPC guest MSI discussion in Santa Fe
From: Will Deacon @ 2016-11-08 17:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <dae12190-1eb6-20a9-5740-9e5be8bb65fc@redhat.com>
On Tue, Nov 08, 2016 at 03:27:23PM +0100, Auger Eric wrote:
> On 08/11/2016 03:45, Will Deacon wrote:
> > Rather than treat these as separate problems, a better interface is to
> > tell userspace about a set of reserved regions, and have this include
> > the MSI doorbell, irrespective of whether or not it can be remapped.
> > Don suggested that we statically pick an address for the doorbell in a
> > similar way to x86, and have the kernel map it there. We could even pick
> > 0xfee00000. If it conflicts with a reserved region on the platform (due
> > to (4)), then we'd obviously have to (deterministically?) allocate it
> > somewhere else, but probably within the bottom 4G.
>
> This is tentatively achieved now with
> [1] [RFC v2 0/8] KVM PCIe/MSI passthrough on ARM/ARM64 - Alt II
> (http://www.mail-archive.com/linux-kernel at vger.kernel.org/msg1264506.html)
Yup, I saw that fly by. Hopefully some of the internals can be reused
with the current thinking on user ABI.
> > The next question is how to tell userspace about all of the reserved
> > regions. Initially, the idea was to extend VFIO, however Alex pointed
> > out a horrible scenario:
> >
> > 1. QEMU spawns a VM on system 0
> > 2. VM is migrated to system 1
> > 3. QEMU attempts to passthrough a device using PCI hotplug
> >
> > In this scenario, the guest memory map is chosen at step (1), yet there
> > is no VFIO fd available to determine the reserved regions. Furthermore,
> > the reserved regions may vary between system 0 and system 1. This pretty
> > much rules out using VFIO to determine the reserved regions.Alex suggested
> > that the SMMU driver can advertise the regions via /sys/class/iommu/. This
> > would solve part of the problem, but migration between systems with
> > different memory maps can still cause problems if the reserved regions
> > of the new system conflict with the guest memory map chosen by QEMU.
>
>
> OK so I understand we do not want anymore the VFIO chain capability API
> (patch 5 of above series) but we prefer a sysfs approach instead.
Right.
> I understand the sysfs approach which allows the userspace to get the
> info earlier and independently on VFIO. Keeping in mind current QEMU
> virt - which is not the only userspace - will not do much from this info
> until we bring upheavals in virt address space management. So if I am
> not wrong, at the moment the main action to be undertaken is the
> rejection of the PCI hotplug in case we detect a collision.
I don't think so; it should be up to userspace to reject the hotplug.
If userspace doesn't have support for the regions, then that's fine --
you just end up in a situation where the CPU page table maps memory
somewhere that the device can't see. In other words, you'll end up with
spurious DMA failures, but that's exactly what happens with current systems
if you passthrough an overlapping region (Robin demonstrated this on Juno).
Additionally, you can imagine some future support where you can tell the
guest not to use certain regions of its memory for DMA. In this case, you
wouldn't want to refuse the hotplug in the case of overlapping regions.
Really, I think the kernel side just needs to enumerate the fixed reserved
regions, place the doorbell at a fixed address and then advertise these
via sysfs.
> I can respin [1]
> - studying and taking into account Robin's comments about dm_regions
> similarities
> - removing the VFIO capability chain and replacing this by a sysfs API
Ideally, this would be reusable between different SMMU drivers so the sysfs
entries have the same format etc.
> Would that be OK?
Sounds good to me. Are you in a position to prototype something on the qemu
side once we've got kernel-side agreement?
> What about Alex comments who wanted to report the usable memory ranges
> instead of unusable memory ranges?
>
> Also did you have a chance to discuss the following items:
> 1) the VFIO irq safety assessment
The discussion really focussed on system topology, as opposed to properties
of the doorbell. Regardless of how the device talks to the doorbell, if
the doorbell can't protect against things like MSI spoofing, then it's
unsafe. My opinion is that we shouldn't allow passthrough by default on
systems with unsafe doorbells (we could piggyback on allow_unsafe_interrupts
cmdline option to VFIO).
A first step would be making all this opt-in, and only supporting GICv3
ITS for now.
> 2) the MSI reserved size computation (is an arbitrary size OK?)
If we fix the base address, we could fix a size too. However, we'd still
need to enumerate the doorbells to check that they fit in the region we
have. If not, then we can warn during boot and treat it the same way as
a resource conflict (that is, reallocate the region in some deterministic
way).
Will
^ permalink raw reply
* [PATCH v2] spi: atmel: use managed resource for gpio chip select
From: Alexandre Belloni @ 2016-11-08 17:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161108174852.14311-1-nicolas.ferre@atmel.com>
On 08/11/2016 at 18:48:52 +0100, Nicolas Ferre wrote :
> Use the managed gpio CS pin request so that we avoid having trouble
> in the cleanup code.
> In fact, if module was configured with DT, cleanup code released
> invalid pin. Since resource wasn't freed, module cannot be reinserted.
>
> This require to extract the gpio request call from the "setup" function
> and call it in the appropriate probe function.
>
> Reported-by: Alexander Morozov <linux@meltdown.ru>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
I think that's fine but I still have that item on my todo list
(discussion in july 2014 with Mark):
---
>> Mark: maybe it would make sense to do devm_gpio_request_one() in
>> of_spi_register_master(), after of_get_named_gpio.
> You need to transition all the drivers doing things manually but yes.
> As I keep saying all the GPIO handling needs to be completely
> refactored.
---
> ---
> v2: fix devm_gpio_request location: the setup code for device was not proper
> location. Move it to the probe function and add needed DT routines to
> handle all CS gpio specified.
>
> drivers/spi/spi-atmel.c | 50 ++++++++++++++++++++++++++++++++++++++-----------
> 1 file changed, 39 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
> index 32683a13dd60..a60925614480 100644
> --- a/drivers/spi/spi-atmel.c
> +++ b/drivers/spi/spi-atmel.c
> @@ -24,6 +24,7 @@
>
> #include <linux/io.h>
> #include <linux/gpio.h>
> +#include <linux/of_gpio.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/pm_runtime.h>
>
> @@ -1204,7 +1205,6 @@ static int atmel_spi_setup(struct spi_device *spi)
> u32 csr;
> unsigned int bits = spi->bits_per_word;
> unsigned int npcs_pin;
> - int ret;
>
> as = spi_master_get_devdata(spi->master);
>
> @@ -1247,16 +1247,9 @@ static int atmel_spi_setup(struct spi_device *spi)
> if (!asd)
> return -ENOMEM;
>
> - if (as->use_cs_gpios) {
> - ret = gpio_request(npcs_pin, dev_name(&spi->dev));
> - if (ret) {
> - kfree(asd);
> - return ret;
> - }
> -
> + if (as->use_cs_gpios)
> gpio_direction_output(npcs_pin,
> !(spi->mode & SPI_CS_HIGH));
> - }
>
> asd->npcs_pin = npcs_pin;
> spi->controller_state = asd;
> @@ -1471,13 +1464,11 @@ static int atmel_spi_transfer_one_message(struct spi_master *master,
> static void atmel_spi_cleanup(struct spi_device *spi)
> {
> struct atmel_spi_device *asd = spi->controller_state;
> - unsigned gpio = (unsigned long) spi->controller_data;
>
> if (!asd)
> return;
>
> spi->controller_state = NULL;
> - gpio_free(gpio);
> kfree(asd);
> }
>
> @@ -1499,6 +1490,39 @@ static void atmel_get_caps(struct atmel_spi *as)
> }
>
> /*-------------------------------------------------------------------------*/
> +static int atmel_spi_gpio_cs(struct platform_device *pdev)
> +{
> + struct spi_master *master = platform_get_drvdata(pdev);
> + struct atmel_spi *as = spi_master_get_devdata(master);
> + struct device_node *np = master->dev.of_node;
> + int i;
> + int ret = 0;
> + int nb = 0;
> +
> + if (!as->use_cs_gpios)
> + return 0;
> +
> + if (!np)
> + return 0;
> +
> + nb = of_gpio_named_count(np, "cs-gpios");
> + for (i = 0; i < nb; i++) {
> + int cs_gpio = of_get_named_gpio(pdev->dev.of_node,
> + "cs-gpios", i);
> +
> + if (cs_gpio == -EPROBE_DEFER)
> + return cs_gpio;
> +
> + if (gpio_is_valid(cs_gpio)) {
> + ret = devm_gpio_request(&pdev->dev, cs_gpio,
> + dev_name(&pdev->dev));
> + if (ret)
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
>
> static int atmel_spi_probe(struct platform_device *pdev)
> {
> @@ -1577,6 +1601,10 @@ static int atmel_spi_probe(struct platform_device *pdev)
> master->num_chipselect = 4;
> }
>
> + ret = atmel_spi_gpio_cs(pdev);
> + if (ret)
> + goto out_unmap_regs;
> +
> as->use_dma = false;
> as->use_pdc = false;
> if (as->caps.has_dma_support) {
> --
> 2.9.0
>
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply
* [PATCH v2] spi: atmel: use managed resource for gpio chip select
From: Nicolas Ferre @ 2016-11-08 17:48 UTC (permalink / raw)
To: linux-arm-kernel
Use the managed gpio CS pin request so that we avoid having trouble
in the cleanup code.
In fact, if module was configured with DT, cleanup code released
invalid pin. Since resource wasn't freed, module cannot be reinserted.
This require to extract the gpio request call from the "setup" function
and call it in the appropriate probe function.
Reported-by: Alexander Morozov <linux@meltdown.ru>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
v2: fix devm_gpio_request location: the setup code for device was not proper
location. Move it to the probe function and add needed DT routines to
handle all CS gpio specified.
drivers/spi/spi-atmel.c | 50 ++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 39 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 32683a13dd60..a60925614480 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -24,6 +24,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
@@ -1204,7 +1205,6 @@ static int atmel_spi_setup(struct spi_device *spi)
u32 csr;
unsigned int bits = spi->bits_per_word;
unsigned int npcs_pin;
- int ret;
as = spi_master_get_devdata(spi->master);
@@ -1247,16 +1247,9 @@ static int atmel_spi_setup(struct spi_device *spi)
if (!asd)
return -ENOMEM;
- if (as->use_cs_gpios) {
- ret = gpio_request(npcs_pin, dev_name(&spi->dev));
- if (ret) {
- kfree(asd);
- return ret;
- }
-
+ if (as->use_cs_gpios)
gpio_direction_output(npcs_pin,
!(spi->mode & SPI_CS_HIGH));
- }
asd->npcs_pin = npcs_pin;
spi->controller_state = asd;
@@ -1471,13 +1464,11 @@ static int atmel_spi_transfer_one_message(struct spi_master *master,
static void atmel_spi_cleanup(struct spi_device *spi)
{
struct atmel_spi_device *asd = spi->controller_state;
- unsigned gpio = (unsigned long) spi->controller_data;
if (!asd)
return;
spi->controller_state = NULL;
- gpio_free(gpio);
kfree(asd);
}
@@ -1499,6 +1490,39 @@ static void atmel_get_caps(struct atmel_spi *as)
}
/*-------------------------------------------------------------------------*/
+static int atmel_spi_gpio_cs(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ struct device_node *np = master->dev.of_node;
+ int i;
+ int ret = 0;
+ int nb = 0;
+
+ if (!as->use_cs_gpios)
+ return 0;
+
+ if (!np)
+ return 0;
+
+ nb = of_gpio_named_count(np, "cs-gpios");
+ for (i = 0; i < nb; i++) {
+ int cs_gpio = of_get_named_gpio(pdev->dev.of_node,
+ "cs-gpios", i);
+
+ if (cs_gpio == -EPROBE_DEFER)
+ return cs_gpio;
+
+ if (gpio_is_valid(cs_gpio)) {
+ ret = devm_gpio_request(&pdev->dev, cs_gpio,
+ dev_name(&pdev->dev));
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
static int atmel_spi_probe(struct platform_device *pdev)
{
@@ -1577,6 +1601,10 @@ static int atmel_spi_probe(struct platform_device *pdev)
master->num_chipselect = 4;
}
+ ret = atmel_spi_gpio_cs(pdev);
+ if (ret)
+ goto out_unmap_regs;
+
as->use_dma = false;
as->use_pdc = false;
if (as->caps.has_dma_support) {
--
2.9.0
^ permalink raw reply related
* [PATCH 01/30] usb: dwc2: Deprecate g-use-dma binding
From: John Youn @ 2016-11-08 17:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <87wpgeibdh.fsf@linux.intel.com>
On 11/8/2016 1:12 AM, Felipe Balbi wrote:
>
> Hi,
>
> John Youn <johnyoun@synopsys.com> writes:
>> Add a vendor prefix and make the name more consistent by renaming it to
>> "snps,gadget-dma-enable".
>>
>> Signed-off-by: John Youn <johnyoun@synopsys.com>
>> ---
>> Documentation/devicetree/bindings/usb/dwc2.txt | 5 ++++-
>> arch/arm/boot/dts/rk3036.dtsi | 2 +-
>> arch/arm/boot/dts/rk3288.dtsi | 2 +-
>> arch/arm/boot/dts/rk3xxx.dtsi | 2 +-
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 +-
>> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 2 +-
>> drivers/usb/dwc2/params.c | 9 ++++++++-
>> drivers/usb/dwc2/pci.c | 2 +-
>> 8 files changed, 18 insertions(+), 8 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
>> index 9472111..389a461 100644
>> --- a/Documentation/devicetree/bindings/usb/dwc2.txt
>> +++ b/Documentation/devicetree/bindings/usb/dwc2.txt
>> @@ -26,11 +26,14 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
>> - dr_mode: shall be one of "host", "peripheral" and "otg"
>> Refer to usb/generic.txt
>> - snps,host-dma-disable: disable host DMA mode.
>> -- g-use-dma: enable dma usage in gadget driver.
>> +- snps,gadget-dma-enable: enable gadget DMA mode.
>
> I don't see why you even have this binding. Looking through the code,
> you have:
>
> #define GHWCFG2_SLAVE_ONLY_ARCH 0
> #define GHWCFG2_EXT_DMA_ARCH 1
> #define GHWCFG2_INT_DMA_ARCH 2
>
> void dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val)
> {
> int valid = 1;
>
> if (val > 0 && hsotg->hw_params.arch == GHWCFG2_SLAVE_ONLY_ARCH)
> valid = 0;
> if (val < 0)
> valid = 0;
>
> if (!valid) {
> if (val >= 0)
> dev_err(hsotg->dev,
> "%d invalid for dma_enable parameter. Check HW configuration.\n",
> val);
> val = hsotg->hw_params.arch != GHWCFG2_SLAVE_ONLY_ARCH;
> dev_dbg(hsotg->dev, "Setting dma_enable to %d\n", val);
> }
>
> hsotg->core_params->dma_enable = val;
> }
>
> which seems to hint that DMA support is discoverable. If there is DMA,
> why would disable it?
>
Yes that's the case and I would prefer to make it discoverable and
enabled by default.
But the legacy behavior has always been like this because DMA was
never fully implemented in the gadget driver and it was an opt-in
feature. Periodic support was only added recently.
What do you think about enabling it by default now? I think most
platforms already use DMA.
We would still need a "disable" binding for IP validation purposes at
least.
Regards,
John
^ permalink raw reply
* [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol
From: Russell King - ARM Linux @ 2016-11-08 17:46 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <fb4348a8-197c-2219-ff01-8716e2a0b955@arm.com>
On Tue, Nov 08, 2016 at 05:37:25PM +0000, Sudeep Holla wrote:
>
>
> On 08/11/16 16:06, Russell King - ARM Linux wrote:
> >On Tue, Nov 08, 2016 at 03:40:38PM +0000, Russell King - ARM Linux wrote:
> >>As it contains a zero sized Image and .dtb files, I tried copying my
> >>Image and .dtb over, and also copied my original config.txt (only
> >>change is AUTORUN: FALSE). It still doesn't appear to boot beyond
> >>this point.
> >
> >Well, it seems that I can't even go back to my original set of firmware
> >as UEFI has stopped working:
> >
> >NOTICE: Booting Trusted Firmware
> >NOTICE: BL1: v1.0(release):14b6608
> >NOTICE: BL1: Built : 14:15:51, Sep 1 2014
> >NOTICE: BL1: Booting BL2
> >NOTICE: BL2: v1.0(release):14b6608
> >NOTICE: BL2: Built : 14:15:51, Sep 1 2014
> >NOTICE: BL1: Booting BL3-1
> >NOTICE: BL3-1: v1.0(release):14b6608
> >NOTICE: BL3-1: Built : 14:15:53, Sep 1 2014
> >UEFI firmware (version v2.1 built at 14:41:56 on Oct 23 2014)
> >Warning: Fail to load FDT file 'juno.dtb'.
> >
>
> This again because of incompatibility of the configuration data saved in
> NOR flash. The erase command I gave early is to erase that when you
> switched between the UEFI binaries. It's really horrible mess UEFI
> created in the initial days of Juno, and hopefully they have moved to
> some standard format these days.
Yea, what it means is I've no possibility to go back to what was
originally working now, since I don't understand how to get UEFI to
behave (Will set the machine up for me, I don't have any information
on how it was originally configured other than what was on the uSD
card, which appears incomplete.)
> >and UEFI is the most unfriendly thing going - the "boot manager" thing
> >doesn't let you view the configuration:
> >
>
> I completely agree. I had real bad times in past dealing with such
> things in UEFI.
>
> >[1] Linux from NOR Flash
> >[2] Shell
> >[3] Boot Manager
> >Start: 3
> >[1] Add Boot Device Entry
> >[2] Update Boot Device Entry
> >[3] Remove Boot Device Entry
> >[4] Reorder Boot Device Entries
> >[5] Update FDT path
> >[6] Set Boot Timeout
> >[7] Return to main menu
> >Choice:
> >
> >and dropping into the shell... well, I've no idea how to get a listing
> >of what it thinks is in the NOR device (or even how to refer to the
> >NOR device.) "devices" shows nothing that's even remotely English.
> >
>
> I think startup.nsh needs some edits. Just replace it with something like:
>
> "norkern dtb=board.dtb console=ttyAMA0,115200n8 root=/dev/nfs rw
> rootwait ip=dhcp systemd.log_target=null nfsroot=..." or something
> alike. Currently it just echos and stops.
>
> Regarding the new firmware stopping abruptly, I have no clue, except
> asking you to erase the flash completely when switching between the
> firmware versions. That has worked for me for all UEFI related issues in
> the past. It's really annoying I understand.
>
> flash> eraseall
I've tried that, it still stops at the same point, after:
FV2 Hob 0xFE07B000 - 0xFE8253BF
and remains unresponsive.
I do notice that the uSD card becomes visible through USB at this point
though.
Okay, well, I'm going to have to disable Juno from the nightly boots
until we get some kind of resolution on this, as my Juno is now
incapable of booting anything.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply
* [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol
From: Sudeep Holla @ 2016-11-08 17:37 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161108160625.GU1041@n2100.armlinux.org.uk>
On 08/11/16 16:06, Russell King - ARM Linux wrote:
> On Tue, Nov 08, 2016 at 03:40:38PM +0000, Russell King - ARM Linux wrote:
>> As it contains a zero sized Image and .dtb files, I tried copying my
>> Image and .dtb over, and also copied my original config.txt (only
>> change is AUTORUN: FALSE). It still doesn't appear to boot beyond
>> this point.
>
> Well, it seems that I can't even go back to my original set of firmware
> as UEFI has stopped working:
>
> NOTICE: Booting Trusted Firmware
> NOTICE: BL1: v1.0(release):14b6608
> NOTICE: BL1: Built : 14:15:51, Sep 1 2014
> NOTICE: BL1: Booting BL2
> NOTICE: BL2: v1.0(release):14b6608
> NOTICE: BL2: Built : 14:15:51, Sep 1 2014
> NOTICE: BL1: Booting BL3-1
> NOTICE: BL3-1: v1.0(release):14b6608
> NOTICE: BL3-1: Built : 14:15:53, Sep 1 2014
> UEFI firmware (version v2.1 built at 14:41:56 on Oct 23 2014)
> Warning: Fail to load FDT file 'juno.dtb'.
>
This again because of incompatibility of the configuration data saved in
NOR flash. The erase command I gave early is to erase that when you
switched between the UEFI binaries. It's really horrible mess UEFI
created in the initial days of Juno, and hopefully they have moved to
some standard format these days.
> and UEFI is the most unfriendly thing going - the "boot manager" thing
> doesn't let you view the configuration:
>
I completely agree. I had real bad times in past dealing with such
things in UEFI.
> [1] Linux from NOR Flash
> [2] Shell
> [3] Boot Manager
> Start: 3
> [1] Add Boot Device Entry
> [2] Update Boot Device Entry
> [3] Remove Boot Device Entry
> [4] Reorder Boot Device Entries
> [5] Update FDT path
> [6] Set Boot Timeout
> [7] Return to main menu
> Choice:
>
> and dropping into the shell... well, I've no idea how to get a listing
> of what it thinks is in the NOR device (or even how to refer to the
> NOR device.) "devices" shows nothing that's even remotely English.
>
I think startup.nsh needs some edits. Just replace it with something like:
"norkern dtb=board.dtb console=ttyAMA0,115200n8 root=/dev/nfs rw
rootwait ip=dhcp systemd.log_target=null nfsroot=..." or something
alike. Currently it just echos and stops.
Regarding the new firmware stopping abruptly, I have no clue, except
asking you to erase the flash completely when switching between the
firmware versions. That has worked for me for all UEFI related issues in
the past. It's really annoying I understand.
flash> eraseall
--
Regards,
Sudeep
^ permalink raw reply
* [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI
From: maitysanchayan at gmail.com @ 2016-11-08 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <3d2b6dfd-c03c-e635-8dc1-2dc9ac454f5a@mentor.com>
Hello Shawn,
On 16-10-22 15:43:04, Vladimir Zapolskiy wrote:
> Hi Shawn,
>
> On 10/22/2016 06:25 AM, Shawn Guo wrote:
> > On Mon, Sep 19, 2016 at 10:41:51AM +0530, Sanchayan Maity wrote:
> > > Remove the use of DDC I2C bus bitbang to support reading of EDID
> > > and rely on support from internal HDMI I2C master controller instead.
> > > As a result remove the device tree property ddc-i2c-bus.
> > >
> > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> >
> > I think that the dw-hdmi i2c support [1] is a prerequisite of this
> > patch. I do not see it lands on v4.9-rc1. Or am I missing something?
> >
> > Shawn
> >
> > [1] https://patchwork.kernel.org/patch/9296883/
> >
>
> I'm adding Philipp to Cc, since he is the last one who tested the change
> and helped me to push the change to the mainline:
>
> https://lists.freedesktop.org/archives/dri-devel/2016-September/118569.html
>
> The problem is that there is no official DW HDMI bridge maintainer, may be
> you can review the change, and if you find it satisfactory push it through
> ARM/iMX tree.
Shawn, is it okay if that patch goes through your ARM/iMX tree?
- Sanchayan.
^ permalink raw reply
* [PATCH 10/10] ARM: gr8: Convert to CCU
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
Now that we have a driver for the GR8, we can convert our DT to it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/ntc-gr8.dtsi | 518 +++-------------------------------
1 file changed, 55 insertions(+), 463 deletions(-)
diff --git a/arch/arm/boot/dts/ntc-gr8.dtsi b/arch/arm/boot/dts/ntc-gr8.dtsi
index ea86d4d58db6..b18f35c144d7 100644
--- a/arch/arm/boot/dts/ntc-gr8.dtsi
+++ b/arch/arm/boot/dts/ntc-gr8.dtsi
@@ -42,9 +42,10 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/clock/sun5i-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
/ {
interrupt-parent = <&intc>;
@@ -59,7 +60,7 @@
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
};
};
@@ -68,419 +69,19 @@
#size-cells = <1>;
ranges;
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
osc24M: clk at 01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
+ compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc3M: osc3M-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk at 0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
-
- pll1: clk at 01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk at 01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk at 01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2-clk {
- compatible = "allwinner,sun4i-a10-pll3-2x-clk";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll3>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk at 01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk at 01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk at 01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- pll7: clk at 01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2-clk {
- compatible = "allwinner,sun4i-a10-pll3-2x-clk";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll7>;
- clock-output-names = "pll7-2x";
- };
-
- /* dummy is 200M */
- cpu: cpu at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb: ahb at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>, <&cpu>, <&pll6 1>;
- clock-output-names = "ahb";
- /*
- * Use PLL6 as parent, instead of CPU/AXI
- * which has rate changes due to cpufreq
- */
- assigned-clocks = <&ahb>;
- assigned-clock-parents = <&pll6 1>;
- };
-
- apb0: apb0 at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb1: clk at 01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- axi_gates: clk at 01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-indices = <0>;
- clock-output-names = "axi_dram";
- };
-
- ahb_gates: clk at 01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <5>, <6>,
- <7>, <8>, <9>,
- <10>, <13>,
- <14>, <17>, <20>,
- <21>, <22>,
- <28>, <32>, <34>,
- <36>, <40>, <44>,
- <46>, <51>,
- <52>;
- clock-output-names = "ahb_usbotg", "ahb_ehci",
- "ahb_ohci", "ahb_ss", "ahb_dma",
- "ahb_bist", "ahb_mmc0", "ahb_mmc1",
- "ahb_mmc2", "ahb_nand",
- "ahb_sdram", "ahb_emac", "ahb_spi0",
- "ahb_spi1", "ahb_spi2",
- "ahb_hstimer", "ahb_ve", "ahb_tve",
- "ahb_lcd", "ahb_csi", "ahb_de_be",
- "ahb_de_fe", "ahb_iep",
- "ahb_mali400";
- };
-
- apb0_gates: clk at 01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <3>,
- <5>, <6>;
- clock-output-names = "apb0_codec", "apb0_i2s0",
- "apb0_pio", "apb0_ir";
- };
-
- apb1_gates: clk at 01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <17>,
- <18>, <19>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_uart1",
- "apb1_uart2", "apb1_uart3";
- };
-
- nand_clk: clk at 01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk at 01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk at 01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk at 01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk at 01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- ts_clk: clk at 01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk at 01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk at 01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk at 01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk at 01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- ir0_clk: clk at 01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- i2s0_clk: clk at 01c200b8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200b8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s0";
- };
-
- spdif_clk: clk at 01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- usb_clk: clk at 01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_phy";
- };
-
- dram_gates: clk at 01c20100 {
- #clock-cells = <1>;
- compatible = "nextthing,gr8-dram-gates-clk",
- "allwinner,sun4i-a10-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>,
- <25>,
- <26>,
- <29>,
- <31>;
- clock-output-names = "dram_ve",
- "dram_csi",
- "dram_de_fe",
- "dram_de_be",
- "dram_ace",
- "dram_iep";
- };
-
- de_be_clk: clk at 01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be";
- };
-
- de_fe_clk: clk at 01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe";
- };
-
- tcon_ch0_clk: clk at 01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon-ch0-sclk";
- };
-
- tcon_ch1_clk: clk at 01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon-ch1-sclk";
- };
-
- codec_clk: clk at 01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
-
- mbus_clk: clk at 01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mbus";
- };
};
display-engine {
@@ -528,7 +129,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <27>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
@@ -536,7 +137,7 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -549,7 +150,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -563,7 +164,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -576,8 +177,8 @@
tve0: tv-encoder at 01c0a000 {
compatible = "allwinner,sun4i-a10-tv-encoder";
reg = <0x01c0a000 0x1000>;
- clocks = <&ahb_gates 34>;
- resets = <&tcon_ch0_clk 0>;
+ clocks = <&ccu CLK_AHB_TVE>;
+ resets = <&ccu RST_TVE>;
status = "disabled";
port {
@@ -595,11 +196,11 @@
compatible = "allwinner,sun5i-a13-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
- resets = <&tcon_ch0_clk 1>;
+ resets = <&ccu RST_LCD>;
reset-names = "lcd";
- clocks = <&ahb_gates 36>,
- <&tcon_ch0_clk>,
- <&tcon_ch1_clk>;
+ clocks = <&ccu CLK_AHB_LCD>,
+ <&ccu CLK_TCON_CH0>,
+ <&ccu CLK_TCON_CH1>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
@@ -637,14 +238,8 @@
mmc0: mmc at 01c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
interrupts = <32>;
status = "disabled";
#address-cells = <1>;
@@ -654,14 +249,8 @@
mmc1: mmc at 01c10000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
interrupts = <33>;
status = "disabled";
#address-cells = <1>;
@@ -671,14 +260,8 @@
mmc2: mmc at 01c11000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
interrupts = <34>;
status = "disabled";
#address-cells = <1>;
@@ -688,7 +271,7 @@
usb_otg: usb at 01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <38>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -705,9 +288,9 @@
compatible = "allwinner,sun5i-a13-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4>;
reg-names = "phy_ctrl", "pmu1";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY0>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>;
+ resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
reset-names = "usb0_reset", "usb1_reset";
status = "disabled";
};
@@ -716,7 +299,7 @@
compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -726,7 +309,7 @@
compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <40>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -736,7 +319,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -746,6 +329,15 @@
#size-cells = <0>;
};
+ ccu: clock at 01c20000 {
+ compatible = "nextthing,gr8-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
intc: interrupt-controller at 01c20400 {
compatible = "allwinner,sun4i-a10-ic";
reg = <0x01c20400 0x400>;
@@ -757,7 +349,7 @@
compatible = "nextthing,gr8-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <28>;
- clocks = <&apb0_gates 5>;
+ clocks = <&ccu CLK_APB0_PIO>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
@@ -914,7 +506,7 @@
pwm: pwm at 01c20e00 {
compatible = "allwinner,sun5i-a10s-pwm";
reg = <0x01c20e00 0xc>;
- clocks = <&osc24M>;
+ clocks = <&ccu CLK_HOSC>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -923,7 +515,7 @@
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
- clocks = <&osc24M>;
+ clocks = <&ccu CLK_HOSC>;
};
wdt: watchdog at 01c20c90 {
@@ -936,7 +528,7 @@
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <13>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -946,7 +538,7 @@
ir0: ir at 01c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
clock-names = "apb", "ir";
interrupts = <5>;
reg = <0x01c21800 0x40>;
@@ -958,7 +550,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
interrupts = <16>;
- clocks = <&apb0_gates 3>, <&i2s0_clk>;
+ clocks = <&ccu CLK_APB0_I2S>, <&ccu CLK_I2S>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 3>,
<&dma SUN4I_DMA_NORMAL 3>;
@@ -978,7 +570,7 @@
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
interrupts = <30>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -999,7 +591,7 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
@@ -1009,7 +601,7 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
@@ -1027,7 +619,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1037,7 +629,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1047,7 +639,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1057,18 +649,18 @@
compatible = "allwinner,sun5i-a13-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <82>, <83>;
- clocks = <&ahb_gates 28>;
+ clocks = <&ccu CLK_AHB_HSTIMER>;
};
fe0: display-frontend at 01e00000 {
compatible = "allwinner,sun5i-a13-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <47>;
- clocks = <&ahb_gates 46>, <&de_fe_clk>,
- <&dram_gates 25>;
+ clocks = <&ccu CLK_AHB_DE_FE>, <&ccu CLK_DE_FE>,
+ <&ccu CLK_DRAM_DE_FE>;
clock-names = "ahb", "mod",
"ram";
- resets = <&de_fe_clk>;
+ resets = <&ccu RST_DE_FE>;
status = "disabled";
ports {
@@ -1091,14 +683,14 @@
be0: display-backend at 01e60000 {
compatible = "allwinner,sun5i-a13-display-backend";
reg = <0x01e60000 0x10000>;
- clocks = <&ahb_gates 44>, <&de_be_clk>,
- <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_DRAM_DE_BE>;
clock-names = "ahb", "mod",
"ram";
- resets = <&de_be_clk>;
+ resets = <&ccu RST_DE_BE>;
status = "disabled";
- assigned-clocks = <&de_be_clk>;
+ assigned-clocks = <&ccu CLK_DE_BE>;
assigned-clock-rates = <300000000>;
ports {
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 9/10] ARM: sun5i: Convert to CCU
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
Now that we have drivers for all of them, convert all the SoCs that share
the sun5i DTSI to the new CCU driver.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a10s.dtsi | 94 +-------
arch/arm/boot/dts/sun5i-a13.dtsi | 140 +-----------
arch/arm/boot/dts/sun5i-r8.dtsi | 10 +-
arch/arm/boot/dts/sun5i.dtsi | 368 ++++---------------------------
4 files changed, 90 insertions(+), 522 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 7aa8c7aa0153..1d26ae7267dc 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -61,99 +61,33 @@
#size-cells = <1>;
ranges;
- framebuffer at 0 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
- <&ahb_gates 43>, <&ahb_gates 44>;
- status = "disabled";
- };
-
framebuffer at 1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0";
- clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>,
- <&ahb_gates 44>;
+ allwinner,pipeline = "de_be0-lcd0-tve0";
+ clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
+ <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
status = "disabled";
};
framebuffer at 2 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>,
- <&ahb_gates 36>, <&ahb_gates 44>;
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+ clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>,
+ <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>,
+ <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>;
status = "disabled";
};
};
- clocks {
- ahb_gates: clk at 01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <5>, <6>,
- <7>, <8>, <9>,
- <10>, <13>,
- <14>, <17>, <18>,
- <20>, <21>, <22>,
- <26>, <28>, <32>,
- <34>, <36>, <40>,
- <43>, <44>,
- <46>, <51>,
- <52>;
- clock-output-names = "ahb_usbotg", "ahb_ehci",
- "ahb_ohci", "ahb_ss", "ahb_dma",
- "ahb_bist", "ahb_mmc0", "ahb_mmc1",
- "ahb_mmc2", "ahb_nand",
- "ahb_sdram", "ahb_emac", "ahb_ts",
- "ahb_spi0", "ahb_spi1", "ahb_spi2",
- "ahb_gps", "ahb_stimer", "ahb_ve",
- "ahb_tve", "ahb_lcd", "ahb_csi",
- "ahb_hdmi", "ahb_de_be",
- "ahb_de_fe", "ahb_iep",
- "ahb_mali400";
- };
-
- apb0_gates: clk at 01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <3>,
- <5>, <6>,
- <10>;
- clock-output-names = "apb0_codec", "apb0_iis",
- "apb0_pio", "apb0_ir",
- "apb0_keypad";
- };
-
- apb1_gates: clk at 01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <16>,
- <17>, <18>,
- <19>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_uart0",
- "apb1_uart1", "apb1_uart2",
- "apb1_uart3";
- };
- };
-
soc at 01c00000 {
emac: ethernet at 01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
@@ -169,7 +103,7 @@
pwm: pwm at 01c20e00 {
compatible = "allwinner,sun5i-a10s-pwm";
reg = <0x01c20e00 0xc>;
- clocks = <&osc24M>;
+ clocks = <&ccu CLK_HOSC>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -180,7 +114,7 @@
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
@@ -190,12 +124,16 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
};
};
+&ccu {
+ compatible = "allwinner,sun5i-a10s-ccu";
+};
+
&pio {
compatible = "allwinner,sun5i-a10s-pinctrl";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index a17ba0243db3..0330304f1d42 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -61,8 +61,8 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>,
- <&tcon_ch0_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
status = "disabled";
};
};
@@ -99,114 +99,6 @@
};
};
- clocks {
- ahb_gates: clk at 01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <5>, <6>,
- <7>, <8>, <9>,
- <10>, <13>,
- <14>, <20>,
- <21>, <22>,
- <28>, <32>, <34>,
- <36>, <40>, <44>,
- <46>, <51>,
- <52>;
- clock-output-names = "ahb_usbotg", "ahb_ehci",
- "ahb_ohci", "ahb_ss", "ahb_dma",
- "ahb_bist", "ahb_mmc0", "ahb_mmc1",
- "ahb_mmc2", "ahb_nand",
- "ahb_sdram", "ahb_spi0",
- "ahb_spi1", "ahb_spi2",
- "ahb_stimer", "ahb_ve", "ahb_tve",
- "ahb_lcd", "ahb_csi", "ahb_de_be",
- "ahb_de_fe", "ahb_iep",
- "ahb_mali400";
- };
-
- apb0_gates: clk at 01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <5>,
- <6>;
- clock-output-names = "apb0_codec", "apb0_pio",
- "apb0_ir";
- };
-
- apb1_gates: clk at 01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <17>,
- <19>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_uart1",
- "apb1_uart3";
- };
-
- dram_gates: clk at 01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-dram-gates-clk",
- "allwinner,sun4i-a10-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>,
- <25>,
- <26>,
- <29>,
- <31>;
- clock-output-names = "dram_ve",
- "dram_csi",
- "dram_de_fe",
- "dram_de_be",
- "dram_ace",
- "dram_iep";
- };
-
- de_be_clk: clk at 01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be";
- };
-
- de_fe_clk: clk at 01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe";
- };
-
- tcon_ch0_clk: clk at 01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon-ch0-sclk";
- };
-
- tcon_ch1_clk: clk at 01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon-ch1-sclk";
- };
- };
-
display-engine {
compatible = "allwinner,sun5i-a13-display-engine";
allwinner,pipelines = <&fe0>;
@@ -217,11 +109,11 @@
compatible = "allwinner,sun5i-a13-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
- resets = <&tcon_ch0_clk 1>;
+ resets = <&ccu RST_LCD>;
reset-names = "lcd";
- clocks = <&ahb_gates 36>,
- <&tcon_ch0_clk>,
- <&tcon_ch1_clk>;
+ clocks = <&ccu CLK_AHB_LCD>,
+ <&ccu CLK_TCON_CH0>,
+ <&ccu CLK_TCON_CH1>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
@@ -254,7 +146,7 @@
pwm: pwm at 01c20e00 {
compatible = "allwinner,sun5i-a13-pwm";
reg = <0x01c20e00 0xc>;
- clocks = <&osc24M>;
+ clocks = <&ccu CLK_HOSC>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -263,11 +155,11 @@
compatible = "allwinner,sun5i-a13-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <47>;
- clocks = <&ahb_gates 46>, <&de_fe_clk>,
- <&dram_gates 25>;
+ clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>,
+ <&ccu CLK_DRAM_DE_FE>;
clock-names = "ahb", "mod",
"ram";
- resets = <&de_fe_clk>;
+ resets = <&ccu RST_DE_FE>;
status = "disabled";
ports {
@@ -290,14 +182,14 @@
be0: display-backend at 01e60000 {
compatible = "allwinner,sun5i-a13-display-backend";
reg = <0x01e60000 0x10000>;
- clocks = <&ahb_gates 44>, <&de_be_clk>,
- <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_DRAM_DE_BE>;
clock-names = "ahb", "mod",
"ram";
- resets = <&de_be_clk>;
+ resets = <&ccu RST_DE_BE>;
status = "disabled";
- assigned-clocks = <&de_be_clk>;
+ assigned-clocks = <&ccu CLK_DE_BE>;
assigned-clock-rates = <300000000>;
ports {
@@ -330,6 +222,10 @@
};
};
+&ccu {
+ compatible = "allwinner,sun5i-a13-ccu";
+};
+
&cpu0 {
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi
index 8b058f53b7dc..4c1141396c99 100644
--- a/arch/arm/boot/dts/sun5i-r8.dtsi
+++ b/arch/arm/boot/dts/sun5i-r8.dtsi
@@ -51,9 +51,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>, <&de_be_clk>,
- <&tcon_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
+ <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
status = "disabled";
};
};
@@ -62,8 +62,8 @@
tve0: tv-encoder at 01c0a000 {
compatible = "allwinner,sun4i-a10-tv-encoder";
reg = <0x01c0a000 0x1000>;
- clocks = <&ahb_gates 34>;
- resets = <&tcon_ch0_clk 0>;
+ clocks = <&ccu CLK_AHB_TVE>;
+ resets = <&ccu RST_TVE>;
status = "disabled";
port {
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index b4ccee8cfb02..2dbc7623ec04 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -44,13 +44,29 @@
#include "skeleton.dtsi"
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/clock/sun5i-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
/ {
interrupt-parent = <&intc>;
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer at 0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
+ status = "disabled";
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -59,7 +75,7 @@
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
};
};
@@ -68,291 +84,19 @@
#size-cells = <1>;
ranges;
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
osc24M: clk at 01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
+ compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk at 0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
-
- pll1: clk at 01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk at 01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk at 01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll3>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk at 01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk at 01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk at 01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- pll7: clk at 01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll7>;
- clock-output-names = "pll7-2x";
- };
-
- /* dummy is 200M */
- cpu: cpu at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb: ahb at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>, <&cpu>, <&pll6 1>;
- clock-output-names = "ahb";
- /*
- * Use PLL6 as parent, instead of CPU/AXI
- * which has rate changes due to cpufreq
- */
- assigned-clocks = <&ahb>;
- assigned-clock-parents = <&pll6 1>;
- };
-
- apb0: apb0 at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb1: clk at 01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- axi_gates: clk at 01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-indices = <0>;
- clock-output-names = "axi_dram";
- };
-
- nand_clk: clk at 01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk at 01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk at 01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk at 01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk at 01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- ts_clk: clk at 01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk at 01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk at 01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk at 01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk at 01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- ir0_clk: clk at 01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- usb_clk: clk at 01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_phy";
- };
-
- codec_clk: clk at 01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
-
- mbus_clk: clk at 01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mbus";
- };
};
soc at 01c00000 {
@@ -395,7 +139,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <27>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
@@ -403,7 +147,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -417,7 +161,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -430,14 +174,8 @@
mmc0: mmc at 01c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
interrupts = <32>;
status = "disabled";
#address-cells = <1>;
@@ -447,14 +185,8 @@
mmc1: mmc at 01c10000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
interrupts = <33>;
status = "disabled";
#address-cells = <1>;
@@ -464,14 +196,8 @@
mmc2: mmc at 01c11000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
interrupts = <34>;
status = "disabled";
#address-cells = <1>;
@@ -481,7 +207,7 @@
usb_otg: usb at 01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <38>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -496,9 +222,9 @@
compatible = "allwinner,sun5i-a13-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4>;
reg-names = "phy_ctrl", "pmu1";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY0>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>;
+ resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
reset-names = "usb0_reset", "usb1_reset";
status = "disabled";
};
@@ -507,7 +233,7 @@
compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -517,7 +243,7 @@
compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <40>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -527,7 +253,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -537,6 +263,14 @@
#size-cells = <0>;
};
+ ccu: clock at 01c20000 {
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
intc: interrupt-controller at 01c20400 {
compatible = "allwinner,sun4i-a10-ic";
reg = <0x01c20400 0x400>;
@@ -547,7 +281,7 @@
pio: pinctrl at 01c20800 {
reg = <0x01c20800 0x400>;
interrupts = <28>;
- clocks = <&apb0_gates 5>;
+ clocks = <&ccu CLK_APB0_PIO>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
@@ -641,7 +375,7 @@
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
- clocks = <&osc24M>;
+ clocks = <&ccu CLK_HOSC>;
};
wdt: watchdog at 01c20c90 {
@@ -661,7 +395,7 @@
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
interrupts = <30>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -687,7 +421,7 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
@@ -697,7 +431,7 @@
interrupts = <4>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
@@ -705,7 +439,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -715,7 +449,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -725,7 +459,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -735,7 +469,7 @@
compatible = "allwinner,sun5i-a13-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <82>, <83>;
- clocks = <&ahb_gates 28>;
+ clocks = <&ccu CLK_AHB_HSTIMER>;
};
};
};
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 8/10] clk: sunxi-ng: Add GR8 driver
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/Kconfig | 10 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun5i-gr8.c | 684 ++++++++++++++++++++++++++++-
3 files changed, 695 insertions(+), 0 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i-gr8.c
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 5e62e6ad6e08..43f2096b9894 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -84,6 +84,16 @@ config SUN5I_A13_CCU
select SUNXI_CCU_PHASE
default MACH_SUN5I
+config SUN5I_GR8_CCU
+ bool "Support for the NextThing GR8 CCM"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN5I
+
config SUN6I_A31_CCU
bool "Support for the Allwinner A31/A31s CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 1f03b3d608f2..bbdce44c145b 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN5I_A10S_CCU) += ccu-sun5i-a10s.o
obj-$(CONFIG_SUN5I_A13_CCU) += ccu-sun5i-a13.o
+obj-$(CONFIG_SUN5I_GR8_CCU) += ccu-sun5i-gr8.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun5i-gr8.c b/drivers/clk/sunxi-ng/ccu-sun5i-gr8.c
new file mode 100644
index 000000000000..9c1169d0406e
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun5i-gr8.c
@@ -0,0 +1,684 @@
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun5i.h"
+
+static struct ccu_nkmp pll_core_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-core",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN5I_PLL_AUDIO_REG 0x008
+
+static struct ccu_nm pll_audio_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+ .m = _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+ .common = {
+ .reg = 0x008,
+ .hw.init = CLK_HW_INIT("pll-audio-base",
+ "hosc",
+ &ccu_nm_ops,
+ 0),
+ },
+};
+
+static struct ccu_mult pll_video0_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x010,
+ .features = CCU_FEATURE_FRACTIONAL,
+ .hw.init = CLK_HW_INIT("pll-video0",
+ "osc3M",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static struct ccu_nkmp pll_ve_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2, 0);
+
+static struct ccu_div pll_ddr_other_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_periph_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .fixed_post_div = 2,
+ .common = {
+ .reg = 0x028,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static struct ccu_mult pll_video1_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x030,
+ .features = CCU_FEATURE_FRACTIONAL,
+ .hw.init = CLK_HW_INIT("pll-video1",
+ "osc3M",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(hosc_clk, "hosc", "osc24M", 0x050, BIT(0), 0);
+
+#define SUN5I_AHB_REG 0x054
+static const char * const cpu_parents[] = { "osc32k", "hosc",
+ "pll-core" , "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+ { .index = 3, .div = 3, },
+};
+static struct ccu_mux cpu_clk = {
+ .mux = {
+ .shift = 16,
+ .width = 2,
+ .fixed_predivs = cpu_predivs,
+ .n_predivs = ARRAY_SIZE(cpu_predivs),
+ },
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("cpu",
+ cpu_parents,
+ &ccu_mux_ops,
+ CLK_IS_CRITICAL),
+ }
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static const char * const ahb_parents[] = { "axi" , "cpu", "pll-periph" };
+static struct ccu_div ahb_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(6, 2),
+
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb",
+ ahb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb0_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+ 0x054, 8, 2, apb0_div_table, 0);
+
+static const char * const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "axi",
+ 0x05c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
+ 0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci_clk, "ahb-ehci", "ahb",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci_clk, "ahb-ohci", "ahb",
+ 0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk, "ahb-mmc2", "ahb",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk, "ahb-nand", "ahb",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk, "ahb-sdram", "ahb",
+ 0x060, BIT(14), CLK_IS_CRITICAL);
+static SUNXI_CCU_GATE(ahb_spi0_clk, "ahb-spi0", "ahb",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk, "ahb-spi2", "ahb",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_hstimer_clk, "ahb-hstimer", "ahb",
+ 0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk, "ahb-ve", "ahb",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tve_clk, "ahb-tve", "ahb",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_lcd_clk, "ahb-lcd", "ahb",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_csi_clk, "ahb-csi", "ahb",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_de_be_clk, "ahb-de-be", "ahb",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_fe_clk, "ahb-de-fe", "ahb",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_iep_clk, "ahb-iep", "ahb",
+ 0x064, BIT(19), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk, "ahb-gpu", "ahb",
+ 0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk, "apb0-codec", "apb0",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_spdif_clk, "apb0-spdif", "apb0",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(apb0_i2s_clk, "apb0-i2s", "apb0",
+ 0x068, BIT(3), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk, "apb0-pio", "apb0",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir_clk, "apb0-ir", "apb0",
+ 0x068, BIT(6), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk, "apb1-i2c0", "apb1",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk, "apb1-i2c1", "apb1",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk, "apb1-i2c2", "apb1",
+ 0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk, "apb1-uart0", "apb1",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk, "apb1-uart1", "apb1",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk, "apb1-uart2", "apb1",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk, "apb1-uart3", "apb1",
+ 0x06c, BIT(19), 0);
+
+static const char * const mod0_default_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", mod0_default_parents, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s_clk, "i2s", i2s_parents,
+ 0x0b8, 16, 2, BIT(31), 0);
+
+static const char * const spdif_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", spdif_parents,
+ 0x0c0, 16, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(usb_ohci_clk, "usb-ohci", "pll-periph",
+ 0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "pll-periph",
+ 0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "pll-periph",
+ 0x0cc, BIT(9), 0);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "pll-ddr",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_tve_clk, "dram-tve", "pll-ddr",
+ 0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_de_fe_clk, "dram-de-fe", "pll-ddr",
+ 0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be_clk, "dram-de-be", "pll-ddr",
+ 0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_ace_clk, "dram-ace", "pll-ddr",
+ 0x100, BIT(29), 0);
+static SUNXI_CCU_GATE(dram_iep_clk, "dram-iep", "pll-ddr",
+ 0x100, BIT(31), 0);
+
+static const char * const de_parents[] = { "pll-video0", "pll-video1",
+ "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be_clk, "de-be", de_parents,
+ 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe_clk, "de-fe", de_parents,
+ 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon_ch0_clk, "tcon-ch0-sclk", tcon_parents,
+ 0x118, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_ch1_sclk2_clk, "tcon-ch1-sclk2",
+ tcon_parents,
+ 0x12c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(tcon_ch1_sclk1_clk, "tcon-ch1-sclk1", "tcon-ch1-sclk2",
+ 0x12c, 11, 1, BIT(15), 0);
+
+static const char * const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static const u8 csi_table[] = { 0, 1, 2, 5, 6 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_clk, "csi",
+ csi_parents, csi_table,
+ 0x134, 0, 5, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ve_clk, "ve", "pll-ve",
+ 0x13c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+ 0x140, BIT(31), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc",
+ 0x144, BIT(31), 0);
+
+static const char * const gpu_parents[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-video1",
+ "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents,
+ 0x154, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "hosc", "pll-periph", "pll-ddr" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(iep_clk, "iep", "de-be",
+ 0x160, BIT(31), 0);
+
+static struct ccu_common *sun5i_gr8_ccu_clks[] = {
+ &hosc_clk.common,
+ &pll_core_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr_base_clk.common,
+ &pll_ddr_clk.common,
+ &pll_ddr_other_clk.common,
+ &pll_periph_clk.common,
+ &pll_video1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &axi_dram_clk.common,
+ &ahb_otg_clk.common,
+ &ahb_ehci_clk.common,
+ &ahb_ohci_clk.common,
+ &ahb_ss_clk.common,
+ &ahb_dma_clk.common,
+ &ahb_bist_clk.common,
+ &ahb_mmc0_clk.common,
+ &ahb_mmc1_clk.common,
+ &ahb_mmc2_clk.common,
+ &ahb_nand_clk.common,
+ &ahb_sdram_clk.common,
+ &ahb_spi0_clk.common,
+ &ahb_spi2_clk.common,
+ &ahb_hstimer_clk.common,
+ &ahb_ve_clk.common,
+ &ahb_tve_clk.common,
+ &ahb_lcd_clk.common,
+ &ahb_csi_clk.common,
+ &ahb_de_be_clk.common,
+ &ahb_de_fe_clk.common,
+ &ahb_iep_clk.common,
+ &ahb_gpu_clk.common,
+ &apb0_codec_clk.common,
+ &apb0_spdif_clk.common,
+ &apb0_i2s_clk.common,
+ &apb0_pio_clk.common,
+ &apb0_ir_clk.common,
+ &apb1_i2c0_clk.common,
+ &apb1_i2c1_clk.common,
+ &apb1_i2c2_clk.common,
+ &apb1_uart0_clk.common,
+ &apb1_uart1_clk.common,
+ &apb1_uart2_clk.common,
+ &apb1_uart3_clk.common,
+ &nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &ss_clk.common,
+ &spi0_clk.common,
+ &spi2_clk.common,
+ &ir_clk.common,
+ &i2s_clk.common,
+ &spdif_clk.common,
+ &usb_ohci_clk.common,
+ &usb_phy0_clk.common,
+ &usb_phy1_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi_clk.common,
+ &dram_tve_clk.common,
+ &dram_de_fe_clk.common,
+ &dram_de_be_clk.common,
+ &dram_ace_clk.common,
+ &dram_iep_clk.common,
+ &de_be_clk.common,
+ &de_fe_clk.common,
+ &tcon_ch0_clk.common,
+ &tcon_ch1_sclk2_clk.common,
+ &tcon_ch1_sclk1_clk.common,
+ &csi_clk.common,
+ &ve_clk.common,
+ &codec_clk.common,
+ &avs_clk.common,
+ &gpu_clk.common,
+ &mbus_clk.common,
+ &iep_clk.common,
+};
+
+static CLK_FIXED_FACTOR(osc3M_clk, "osc3M", "hosc", 8, 1, 0);
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+static struct clk_hw_onecell_data sun5i_gr8_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_OSC3M] = &osc3M_clk.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB] = &ahb_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_DRAM_AXI] = &axi_dram_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI] = &ahb_ehci_clk.common.hw,
+ [CLK_AHB_OHCI] = &ahb_ohci_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_HSTIMER] = &ahb_hstimer_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVE] = &ahb_tve_clk.common.hw,
+ [CLK_AHB_LCD] = &ahb_lcd_clk.common.hw,
+ [CLK_AHB_CSI] = &ahb_csi_clk.common.hw,
+ [CLK_AHB_DE_BE] = &ahb_de_be_clk.common.hw,
+ [CLK_AHB_DE_FE] = &ahb_de_fe_clk.common.hw,
+ [CLK_AHB_IEP] = &ahb_iep_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_SPDIF] = &apb0_spdif_clk.common.hw,
+ [CLK_APB0_I2S] = &apb0_i2s_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR] = &apb0_ir_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_IR] = &ir_clk.common.hw,
+ [CLK_I2S] = &i2s_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_USB_OHCI] = &usb_ohci_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_TVE] = &dram_tve_clk.common.hw,
+ [CLK_DRAM_DE_FE] = &dram_de_fe_clk.common.hw,
+ [CLK_DRAM_DE_BE] = &dram_de_be_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DRAM_IEP] = &dram_iep_clk.common.hw,
+ [CLK_DE_BE] = &de_be_clk.common.hw,
+ [CLK_DE_FE] = &de_fe_clk.common.hw,
+ [CLK_TCON_CH0] = &tcon_ch0_clk.common.hw,
+ [CLK_TCON_CH1_SCLK] = &tcon_ch1_sclk2_clk.common.hw,
+ [CLK_TCON_CH1] = &tcon_ch1_sclk1_clk.common.hw,
+ [CLK_CSI] = &csi_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_IEP] = &iep_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun5i_gr8_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+
+ [RST_DE_BE] = { 0x104, BIT(30) },
+
+ [RST_DE_FE] = { 0x10c, BIT(30) },
+
+ [RST_TVE] = { 0x118, BIT(29) },
+ [RST_LCD] = { 0x118, BIT(30) },
+
+ [RST_CSI] = { 0x134, BIT(30) },
+
+ [RST_VE] = { 0x13c, BIT(0) },
+
+ [RST_GPU] = { 0x154, BIT(30) },
+
+ [RST_IEP] = { 0x160, BIT(30) },
+};
+
+static const struct sunxi_ccu_desc sun5i_gr8_ccu_desc = {
+ .ccu_clks = sun5i_gr8_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun5i_gr8_ccu_clks),
+
+ .hw_clks = &sun5i_gr8_hw_clks,
+
+ .resets = sun5i_gr8_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun5i_gr8_ccu_resets),
+};
+
+static void __init sun5i_gr8_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN5I_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN5I_PLL_AUDIO_REG);
+
+ /*
+ * Use the peripheral PLL as the AHB parent, instead of CPU /
+ * AXI which have rate changes due to cpufreq.
+ *
+ * This is especially a big deal for the HS timer whose parent
+ * clock is AHB.
+ */
+ val = readl(reg + SUN5I_AHB_REG);
+ val &= ~GENMASK(7, 6);
+ writel(val | (2 << 6), reg + SUN5I_AHB_REG);
+
+ sunxi_ccu_probe(node, reg, &sun5i_gr8_ccu_desc);
+}
+CLK_OF_DECLARE(sun5i_gr8_ccu, "nextthing,gr8-ccu",
+ sun5i_gr8_ccu_setup);
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 7/10] clk: sunxi-ng: Add A13 CCU driver
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/Kconfig | 10 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun5i-a13.c | 681 ++++++++++++++++++++++++++++-
3 files changed, 692 insertions(+), 0 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i-a13.c
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index e2becd36a1f9..5e62e6ad6e08 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -74,6 +74,16 @@ config SUN5I_A10S_CCU
select SUNXI_CCU_PHASE
default MACH_SUN5I
+config SUN5I_A13_CCU
+ bool "Support for the Allwinner A13 CCM"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN5I
+
config SUN6I_A31_CCU
bool "Support for the Allwinner A31/A31s CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 79e9a166dc83..1f03b3d608f2 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
# SoC support
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN5I_A10S_CCU) += ccu-sun5i-a10s.o
+obj-$(CONFIG_SUN5I_A13_CCU) += ccu-sun5i-a13.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun5i-a13.c b/drivers/clk/sunxi-ng/ccu-sun5i-a13.c
new file mode 100644
index 000000000000..7536d5760621
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun5i-a13.c
@@ -0,0 +1,681 @@
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun5i.h"
+
+static struct ccu_nkmp pll_core_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-core",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN5I_PLL_AUDIO_REG 0x008
+
+static struct ccu_nm pll_audio_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+ .m = _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+ .common = {
+ .reg = 0x008,
+ .hw.init = CLK_HW_INIT("pll-audio-base",
+ "hosc",
+ &ccu_nm_ops,
+ 0),
+ },
+};
+
+static struct ccu_mult pll_video0_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x010,
+ .features = CCU_FEATURE_FRACTIONAL,
+ .hw.init = CLK_HW_INIT("pll-video0",
+ "osc3M",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static struct ccu_nkmp pll_ve_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2, 0);
+
+static struct ccu_div pll_ddr_other_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_periph_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .fixed_post_div = 2,
+ .common = {
+ .reg = 0x028,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static struct ccu_mult pll_video1_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x030,
+ .features = CCU_FEATURE_FRACTIONAL,
+ .hw.init = CLK_HW_INIT("pll-video1",
+ "osc3M",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(hosc_clk, "hosc", "osc24M", 0x050, BIT(0), 0);
+
+#define SUN5I_AHB_REG 0x054
+static const char * const cpu_parents[] = { "osc32k", "hosc",
+ "pll-core" , "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+ { .index = 3, .div = 3, },
+};
+static struct ccu_mux cpu_clk = {
+ .mux = {
+ .shift = 16,
+ .width = 2,
+ .fixed_predivs = cpu_predivs,
+ .n_predivs = ARRAY_SIZE(cpu_predivs),
+ },
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("cpu",
+ cpu_parents,
+ &ccu_mux_ops,
+ CLK_IS_CRITICAL),
+ }
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static const char * const ahb_parents[] = { "axi" , "cpu", "pll-periph" };
+static struct ccu_div ahb_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(6, 2),
+
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb",
+ ahb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb0_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+ 0x054, 8, 2, apb0_div_table, 0);
+
+static const char * const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "axi",
+ 0x05c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
+ 0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci_clk, "ahb-ehci", "ahb",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci_clk, "ahb-ohci", "ahb",
+ 0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk, "ahb-mmc2", "ahb",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk, "ahb-nand", "ahb",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk, "ahb-sdram", "ahb",
+ 0x060, BIT(14), CLK_IS_CRITICAL);
+static SUNXI_CCU_GATE(ahb_emac_clk, "ahb-emac", "ahb",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_spi0_clk, "ahb-spi0", "ahb",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi1_clk, "ahb-spi1", "ahb",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk, "ahb-spi2", "ahb",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_hstimer_clk, "ahb-hstimer", "ahb",
+ 0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk, "ahb-ve", "ahb",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tve_clk, "ahb-tve", "ahb",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_lcd_clk, "ahb-lcd", "ahb",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_csi_clk, "ahb-csi", "ahb",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_de_be_clk, "ahb-de-be", "ahb",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_fe_clk, "ahb-de-fe", "ahb",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_iep_clk, "ahb-iep", "ahb",
+ 0x064, BIT(19), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk, "ahb-gpu", "ahb",
+ 0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk, "apb0-codec", "apb0",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk, "apb0-pio", "apb0",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir_clk, "apb0-ir", "apb0",
+ 0x068, BIT(6), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk, "apb1-i2c0", "apb1",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk, "apb1-i2c1", "apb1",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk, "apb1-i2c2", "apb1",
+ 0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk, "apb1-uart0", "apb1",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk, "apb1-uart1", "apb1",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk, "apb1-uart2", "apb1",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk, "apb1-uart3", "apb1",
+ 0x06c, BIT(19), 0);
+
+static const char * const mod0_default_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", mod0_default_parents, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(usb_ohci_clk, "usb-ohci", "pll-periph",
+ 0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "pll-periph",
+ 0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "pll-periph",
+ 0x0cc, BIT(9), 0);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "pll-ddr",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_tve_clk, "dram-tve", "pll-ddr",
+ 0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_de_fe_clk, "dram-de-fe", "pll-ddr",
+ 0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be_clk, "dram-de-be", "pll-ddr",
+ 0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_ace_clk, "dram-ace", "pll-ddr",
+ 0x100, BIT(29), 0);
+static SUNXI_CCU_GATE(dram_iep_clk, "dram-iep", "pll-ddr",
+ 0x100, BIT(31), 0);
+
+static const char * const de_parents[] = { "pll-video0", "pll-video1",
+ "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be_clk, "de-be", de_parents,
+ 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe_clk, "de-fe", de_parents,
+ 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon_ch0_clk, "tcon-ch0-sclk", tcon_parents,
+ 0x118, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_ch1_sclk2_clk, "tcon-ch1-sclk2",
+ tcon_parents,
+ 0x12c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(tcon_ch1_sclk1_clk, "tcon-ch1-sclk1", "tcon-ch1-sclk2",
+ 0x12c, 11, 1, BIT(15), 0);
+
+static const char * const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static const u8 csi_table[] = { 0, 1, 2, 5, 6 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_clk, "csi",
+ csi_parents, csi_table,
+ 0x134, 0, 5, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ve_clk, "ve", "pll-ve",
+ 0x13c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+ 0x140, BIT(31), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc",
+ 0x144, BIT(31), 0);
+
+static const char * const gpu_parents[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-video1",
+ "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents,
+ 0x154, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "hosc", "pll-periph", "pll-ddr" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(iep_clk, "iep", "de-be",
+ 0x160, BIT(31), 0);
+
+static struct ccu_common *sun5i_a13_ccu_clks[] = {
+ &hosc_clk.common,
+ &pll_core_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr_base_clk.common,
+ &pll_ddr_clk.common,
+ &pll_ddr_other_clk.common,
+ &pll_periph_clk.common,
+ &pll_video1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &axi_dram_clk.common,
+ &ahb_otg_clk.common,
+ &ahb_ehci_clk.common,
+ &ahb_ohci_clk.common,
+ &ahb_ss_clk.common,
+ &ahb_dma_clk.common,
+ &ahb_bist_clk.common,
+ &ahb_mmc0_clk.common,
+ &ahb_mmc1_clk.common,
+ &ahb_mmc2_clk.common,
+ &ahb_nand_clk.common,
+ &ahb_sdram_clk.common,
+ &ahb_emac_clk.common,
+ &ahb_spi0_clk.common,
+ &ahb_spi1_clk.common,
+ &ahb_spi2_clk.common,
+ &ahb_hstimer_clk.common,
+ &ahb_ve_clk.common,
+ &ahb_tve_clk.common,
+ &ahb_lcd_clk.common,
+ &ahb_csi_clk.common,
+ &ahb_de_be_clk.common,
+ &ahb_de_fe_clk.common,
+ &ahb_iep_clk.common,
+ &ahb_gpu_clk.common,
+ &apb0_codec_clk.common,
+ &apb0_pio_clk.common,
+ &apb0_ir_clk.common,
+ &apb1_i2c0_clk.common,
+ &apb1_i2c1_clk.common,
+ &apb1_i2c2_clk.common,
+ &apb1_uart0_clk.common,
+ &apb1_uart1_clk.common,
+ &apb1_uart2_clk.common,
+ &apb1_uart3_clk.common,
+ &nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &ss_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &ir_clk.common,
+ &usb_ohci_clk.common,
+ &usb_phy0_clk.common,
+ &usb_phy1_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi_clk.common,
+ &dram_tve_clk.common,
+ &dram_de_fe_clk.common,
+ &dram_de_be_clk.common,
+ &dram_ace_clk.common,
+ &dram_iep_clk.common,
+ &de_be_clk.common,
+ &de_fe_clk.common,
+ &tcon_ch0_clk.common,
+ &tcon_ch1_sclk2_clk.common,
+ &tcon_ch1_sclk1_clk.common,
+ &csi_clk.common,
+ &ve_clk.common,
+ &codec_clk.common,
+ &avs_clk.common,
+ &gpu_clk.common,
+ &mbus_clk.common,
+ &iep_clk.common,
+};
+
+static CLK_FIXED_FACTOR(osc3M_clk, "osc3M", "hosc", 8, 1, 0);
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+static struct clk_hw_onecell_data sun5i_a13_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_OSC3M] = &osc3M_clk.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB] = &ahb_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_DRAM_AXI] = &axi_dram_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI] = &ahb_ehci_clk.common.hw,
+ [CLK_AHB_OHCI] = &ahb_ohci_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_HSTIMER] = &ahb_hstimer_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVE] = &ahb_tve_clk.common.hw,
+ [CLK_AHB_LCD] = &ahb_lcd_clk.common.hw,
+ [CLK_AHB_CSI] = &ahb_csi_clk.common.hw,
+ [CLK_AHB_DE_BE] = &ahb_de_be_clk.common.hw,
+ [CLK_AHB_DE_FE] = &ahb_de_fe_clk.common.hw,
+ [CLK_AHB_IEP] = &ahb_iep_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR] = &apb0_ir_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_IR] = &ir_clk.common.hw,
+ [CLK_USB_OHCI] = &usb_ohci_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_TVE] = &dram_tve_clk.common.hw,
+ [CLK_DRAM_DE_FE] = &dram_de_fe_clk.common.hw,
+ [CLK_DRAM_DE_BE] = &dram_de_be_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DRAM_IEP] = &dram_iep_clk.common.hw,
+ [CLK_DE_BE] = &de_be_clk.common.hw,
+ [CLK_DE_FE] = &de_fe_clk.common.hw,
+ [CLK_TCON_CH0] = &tcon_ch0_clk.common.hw,
+ [CLK_TCON_CH1_SCLK] = &tcon_ch1_sclk2_clk.common.hw,
+ [CLK_TCON_CH1] = &tcon_ch1_sclk1_clk.common.hw,
+ [CLK_CSI] = &csi_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_IEP] = &iep_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun5i_a13_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+
+ [RST_GPS] = { 0x0d0, BIT(30) },
+
+ [RST_DE_BE] = { 0x104, BIT(30) },
+
+ [RST_DE_FE] = { 0x10c, BIT(30) },
+
+ [RST_TVE] = { 0x118, BIT(29) },
+ [RST_LCD] = { 0x118, BIT(30) },
+
+ [RST_CSI] = { 0x134, BIT(30) },
+
+ [RST_VE] = { 0x13c, BIT(0) },
+
+ [RST_GPU] = { 0x154, BIT(30) },
+
+ [RST_IEP] = { 0x160, BIT(30) },
+};
+
+static const struct sunxi_ccu_desc sun5i_a13_ccu_desc = {
+ .ccu_clks = sun5i_a13_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun5i_a13_ccu_clks),
+
+ .hw_clks = &sun5i_a13_hw_clks,
+
+ .resets = sun5i_a13_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun5i_a13_ccu_resets),
+};
+
+static void __init sun5i_a13_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN5I_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN5I_PLL_AUDIO_REG);
+
+ /*
+ * Use the peripheral PLL as the AHB parent, instead of CPU /
+ * AXI which have rate changes due to cpufreq.
+ *
+ * This is especially a big deal for the HS timer whose parent
+ * clock is AHB.
+ */
+ val = readl(reg + SUN5I_AHB_REG);
+ val &= ~GENMASK(7, 6);
+ writel(val | (2 << 6), reg + SUN5I_AHB_REG);
+
+ sunxi_ccu_probe(node, reg, &sun5i_a13_ccu_desc);
+}
+CLK_OF_DECLARE(sun5i_a13_ccu, "allwinner,sun5i-a13-ccu",
+ sun5i_a13_ccu_setup);
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 6/10] clk: sunxi-ng: Add A10s CCU driver
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/Kconfig | 10 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun5i-a10s.c | 755 +++++++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun5i.h | 129 +++++-
4 files changed, 895 insertions(+), 0 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i-a10s.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 8454c6e3dd65..e2becd36a1f9 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -64,6 +64,16 @@ config SUN50I_A64_CCU
select SUNXI_CCU_PHASE
default ARM64 && ARCH_SUNXI
+config SUN5I_A10S_CCU
+ bool "Support for the Allwinner A10s CCM"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN5I
+
config SUN6I_A31_CCU
bool "Support for the Allwinner A31/A31s CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 24fbc6e5deb8..79e9a166dc83 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
# SoC support
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
+obj-$(CONFIG_SUN5I_A10S_CCU) += ccu-sun5i-a10s.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun5i-a10s.c b/drivers/clk/sunxi-ng/ccu-sun5i-a10s.c
new file mode 100644
index 000000000000..94d9a5cbf60b
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun5i-a10s.c
@@ -0,0 +1,755 @@
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun5i.h"
+
+static struct ccu_nkmp pll_core_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-core",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN5I_PLL_AUDIO_REG 0x008
+
+static struct ccu_nm pll_audio_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+ .m = _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+ .common = {
+ .reg = 0x008,
+ .hw.init = CLK_HW_INIT("pll-audio-base",
+ "hosc",
+ &ccu_nm_ops,
+ 0),
+ },
+};
+
+static struct ccu_mult pll_video0_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x010,
+ .features = CCU_FEATURE_FRACTIONAL,
+ .hw.init = CLK_HW_INIT("pll-video0",
+ "osc3M",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static struct ccu_nkmp pll_ve_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2, 0);
+
+static struct ccu_div pll_ddr_other_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_periph_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .fixed_post_div = 2,
+ .common = {
+ .reg = 0x028,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static struct ccu_mult pll_video1_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x030,
+ .features = CCU_FEATURE_FRACTIONAL,
+ .hw.init = CLK_HW_INIT("pll-video1",
+ "osc3M",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(hosc_clk, "hosc", "osc24M", 0x050, BIT(0), 0);
+
+#define SUN5I_AHB_REG 0x054
+static const char * const cpu_parents[] = { "osc32k", "hosc",
+ "pll-core" , "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+ { .index = 3, .div = 3, },
+};
+static struct ccu_mux cpu_clk = {
+ .mux = {
+ .shift = 16,
+ .width = 2,
+ .fixed_predivs = cpu_predivs,
+ .n_predivs = ARRAY_SIZE(cpu_predivs),
+ },
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("cpu",
+ cpu_parents,
+ &ccu_mux_ops,
+ CLK_IS_CRITICAL),
+ }
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static const char * const ahb_parents[] = { "axi" , "cpu", "pll-periph" };
+static struct ccu_div ahb_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(6, 2),
+
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb",
+ ahb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb0_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+ 0x054, 8, 2, apb0_div_table, 0);
+
+static const char * const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "axi",
+ 0x05c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
+ 0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci_clk, "ahb-ehci", "ahb",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci_clk, "ahb-ohci", "ahb",
+ 0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk, "ahb-mmc2", "ahb",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk, "ahb-nand", "ahb",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk, "ahb-sdram", "ahb",
+ 0x060, BIT(14), CLK_IS_CRITICAL);
+static SUNXI_CCU_GATE(ahb_emac_clk, "ahb-emac", "ahb",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_ts_clk, "ahb-ts", "ahb",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_spi0_clk, "ahb-spi0", "ahb",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi1_clk, "ahb-spi1", "ahb",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk, "ahb-spi2", "ahb",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_gps_clk, "ahb-gps", "ahb",
+ 0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(ahb_hstimer_clk, "ahb-hstimer", "ahb",
+ 0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk, "ahb-ve", "ahb",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tve_clk, "ahb-tve", "ahb",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_lcd_clk, "ahb-lcd", "ahb",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_csi_clk, "ahb-csi", "ahb",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_hdmi_clk, "ahb-hdmi", "ahb",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_de_be_clk, "ahb-de-be", "ahb",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_fe_clk, "ahb-de-fe", "ahb",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_iep_clk, "ahb-iep", "ahb",
+ 0x064, BIT(19), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk, "ahb-gpu", "ahb",
+ 0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk, "apb0-codec", "apb0",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_i2s_clk, "apb0-i2s", "apb0",
+ 0x068, BIT(3), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk, "apb0-pio", "apb0",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir_clk, "apb0-ir", "apb0",
+ 0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(apb0_keypad_clk, "apb0-keypad", "apb0",
+ 0x068, BIT(10), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk, "apb1-i2c0", "apb1",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk, "apb1-i2c1", "apb1",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk, "apb1-i2c2", "apb1",
+ 0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk, "apb1-uart0", "apb1",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk, "apb1-uart1", "apb1",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk, "apb1-uart2", "apb1",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk, "apb1-uart3", "apb1",
+ 0x06c, BIT(19), 0);
+
+static const char * const mod0_default_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", mod0_default_parents, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s_clk, "i2s", i2s_parents,
+ 0x0b8, 16, 2, BIT(31), 0);
+
+static const char * const keypad_parents[] = { "hosc", "losc"};
+static const u8 keypad_table[] = { 0, 2 };
+static struct ccu_mp keypad_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(8, 5),
+ .p = _SUNXI_CCU_DIV(20, 2),
+ .mux = _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
+
+ .common = {
+ .reg = 0x0c4,
+ .hw.init = CLK_HW_INIT_PARENTS("keypad",
+ keypad_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(usb_ohci_clk, "usb-ohci", "pll-periph",
+ 0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "pll-periph",
+ 0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "pll-periph",
+ 0x0cc, BIT(9), 0);
+
+static const char * const gps_parents[] = { "hosc", "pll-periph",
+ "pll-video1", "pll-ve" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gps_clk, "gps", gps_parents,
+ 0x0d0, 0, 3, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "pll-ddr",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "pll-ddr",
+ 0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tve_clk, "dram-tve", "pll-ddr",
+ 0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_de_fe_clk, "dram-de-fe", "pll-ddr",
+ 0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be_clk, "dram-de-be", "pll-ddr",
+ 0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_ace_clk, "dram-ace", "pll-ddr",
+ 0x100, BIT(29), 0);
+static SUNXI_CCU_GATE(dram_iep_clk, "dram-iep", "pll-ddr",
+ 0x100, BIT(31), 0);
+
+static const char * const de_parents[] = { "pll-video0", "pll-video1",
+ "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be_clk, "de-be", de_parents,
+ 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe_clk, "de-fe", de_parents,
+ 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon_ch0_clk, "tcon-ch0-sclk", tcon_parents,
+ 0x118, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_ch1_sclk2_clk, "tcon-ch1-sclk2",
+ tcon_parents,
+ 0x12c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(tcon_ch1_sclk1_clk, "tcon-ch1-sclk1", "tcon-ch1-sclk2",
+ 0x12c, 11, 1, BIT(15), 0);
+
+static const char * const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static const u8 csi_table[] = { 0, 1, 2, 5, 6 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_clk, "csi",
+ csi_parents, csi_table,
+ 0x134, 0, 5, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ve_clk, "ve", "pll-ve",
+ 0x13c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+ 0x140, BIT(31), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc",
+ 0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video0-2x" };
+static const u8 hdmi_table[] = { 0, 2 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi_clk, "hdmi",
+ hdmi_parents, hdmi_table,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const gpu_parents[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-video1",
+ "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents,
+ 0x154, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "hosc", "pll-periph", "pll-ddr" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(iep_clk, "iep", "de-be",
+ 0x160, BIT(31), 0);
+
+static struct ccu_common *sun5i_a10s_ccu_clks[] = {
+ &hosc_clk.common,
+ &pll_core_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr_base_clk.common,
+ &pll_ddr_clk.common,
+ &pll_ddr_other_clk.common,
+ &pll_periph_clk.common,
+ &pll_video1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &axi_dram_clk.common,
+ &ahb_otg_clk.common,
+ &ahb_ehci_clk.common,
+ &ahb_ohci_clk.common,
+ &ahb_ss_clk.common,
+ &ahb_dma_clk.common,
+ &ahb_bist_clk.common,
+ &ahb_mmc0_clk.common,
+ &ahb_mmc1_clk.common,
+ &ahb_mmc2_clk.common,
+ &ahb_nand_clk.common,
+ &ahb_sdram_clk.common,
+ &ahb_emac_clk.common,
+ &ahb_ts_clk.common,
+ &ahb_spi0_clk.common,
+ &ahb_spi1_clk.common,
+ &ahb_spi2_clk.common,
+ &ahb_gps_clk.common,
+ &ahb_hstimer_clk.common,
+ &ahb_ve_clk.common,
+ &ahb_tve_clk.common,
+ &ahb_lcd_clk.common,
+ &ahb_csi_clk.common,
+ &ahb_hdmi_clk.common,
+ &ahb_de_be_clk.common,
+ &ahb_de_fe_clk.common,
+ &ahb_iep_clk.common,
+ &ahb_gpu_clk.common,
+ &apb0_codec_clk.common,
+ &apb0_i2s_clk.common,
+ &apb0_pio_clk.common,
+ &apb0_ir_clk.common,
+ &apb0_keypad_clk.common,
+ &apb1_i2c0_clk.common,
+ &apb1_i2c1_clk.common,
+ &apb1_i2c2_clk.common,
+ &apb1_uart0_clk.common,
+ &apb1_uart1_clk.common,
+ &apb1_uart2_clk.common,
+ &apb1_uart3_clk.common,
+ &nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &ts_clk.common,
+ &ss_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &ir_clk.common,
+ &i2s_clk.common,
+ &keypad_clk.common,
+ &usb_ohci_clk.common,
+ &usb_phy0_clk.common,
+ &usb_phy1_clk.common,
+ &gps_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi_clk.common,
+ &dram_ts_clk.common,
+ &dram_tve_clk.common,
+ &dram_de_fe_clk.common,
+ &dram_de_be_clk.common,
+ &dram_ace_clk.common,
+ &dram_iep_clk.common,
+ &de_be_clk.common,
+ &de_fe_clk.common,
+ &tcon_ch0_clk.common,
+ &tcon_ch1_sclk2_clk.common,
+ &tcon_ch1_sclk1_clk.common,
+ &csi_clk.common,
+ &ve_clk.common,
+ &codec_clk.common,
+ &avs_clk.common,
+ &hdmi_clk.common,
+ &gpu_clk.common,
+ &mbus_clk.common,
+ &iep_clk.common,
+};
+
+static CLK_FIXED_FACTOR(osc3M_clk, "osc3M", "hosc", 8, 1, 0);
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+static struct clk_hw_onecell_data sun5i_a10s_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_OSC3M] = &osc3M_clk.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB] = &ahb_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_DRAM_AXI] = &axi_dram_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI] = &ahb_ehci_clk.common.hw,
+ [CLK_AHB_OHCI] = &ahb_ohci_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_GPS] = &ahb_gps_clk.common.hw,
+ [CLK_AHB_HSTIMER] = &ahb_hstimer_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVE] = &ahb_tve_clk.common.hw,
+ [CLK_AHB_LCD] = &ahb_lcd_clk.common.hw,
+ [CLK_AHB_CSI] = &ahb_csi_clk.common.hw,
+ [CLK_AHB_HDMI] = &ahb_hdmi_clk.common.hw,
+ [CLK_AHB_DE_BE] = &ahb_de_be_clk.common.hw,
+ [CLK_AHB_DE_FE] = &ahb_de_fe_clk.common.hw,
+ [CLK_AHB_IEP] = &ahb_iep_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_I2S] = &apb0_i2s_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR] = &apb0_ir_clk.common.hw,
+ [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_IR] = &ir_clk.common.hw,
+ [CLK_I2S] = &i2s_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_USB_OHCI] = &usb_ohci_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_GPS] = &gps_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVE] = &dram_tve_clk.common.hw,
+ [CLK_DRAM_DE_FE] = &dram_de_fe_clk.common.hw,
+ [CLK_DRAM_DE_BE] = &dram_de_be_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DRAM_IEP] = &dram_iep_clk.common.hw,
+ [CLK_DE_BE] = &de_be_clk.common.hw,
+ [CLK_DE_FE] = &de_fe_clk.common.hw,
+ [CLK_TCON_CH0] = &tcon_ch0_clk.common.hw,
+ [CLK_TCON_CH1_SCLK] = &tcon_ch1_sclk2_clk.common.hw,
+ [CLK_TCON_CH1] = &tcon_ch1_sclk1_clk.common.hw,
+ [CLK_CSI] = &csi_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_IEP] = &iep_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun5i_a10s_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+
+ [RST_GPS] = { 0x0d0, BIT(30) },
+
+ [RST_DE_BE] = { 0x104, BIT(30) },
+
+ [RST_DE_FE] = { 0x10c, BIT(30) },
+
+ [RST_TVE] = { 0x118, BIT(29) },
+ [RST_LCD] = { 0x118, BIT(30) },
+
+ [RST_CSI] = { 0x134, BIT(30) },
+
+ [RST_VE] = { 0x13c, BIT(0) },
+
+ [RST_GPU] = { 0x154, BIT(30) },
+
+ [RST_IEP] = { 0x160, BIT(30) },
+};
+
+static const struct sunxi_ccu_desc sun5i_a10s_ccu_desc = {
+ .ccu_clks = sun5i_a10s_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun5i_a10s_ccu_clks),
+
+ .hw_clks = &sun5i_a10s_hw_clks,
+
+ .resets = sun5i_a10s_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun5i_a10s_ccu_resets),
+};
+
+static void __init sun5i_a10s_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN5I_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN5I_PLL_AUDIO_REG);
+
+ /*
+ * Use the peripheral PLL as the AHB parent, instead of CPU /
+ * AXI which have rate changes due to cpufreq.
+ *
+ * This is especially a big deal for the HS timer whose parent
+ * clock is AHB.
+ */
+ val = readl(reg + SUN5I_AHB_REG);
+ val &= ~GENMASK(7, 6);
+ writel(val | (2 << 6), reg + SUN5I_AHB_REG);
+
+ sunxi_ccu_probe(node, reg, &sun5i_a10s_ccu_desc);
+}
+CLK_OF_DECLARE(sun5i_a10s_ccu, "allwinner,sun5i-a10s-ccu",
+ sun5i_a10s_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun5i.h b/drivers/clk/sunxi-ng/ccu-sun5i.h
new file mode 100644
index 000000000000..43f2ce3e9e6e
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun5i.h
@@ -0,0 +1,129 @@
+/*
+ * Copyright 2016 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN5I_H_
+#define _CCU_SUN5I_H_
+
+#include <dt-bindings/clock/sun5i-ccu.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
+
+#define CLK_HOSC 1
+#define CLK_OSC3M 2
+#define CLK_PLL_CORE 3
+#define CLK_PLL_AUDIO_BASE 4
+#define CLK_PLL_AUDIO 5
+#define CLK_PLL_AUDIO_2X 6
+#define CLK_PLL_AUDIO_4X 7
+#define CLK_PLL_AUDIO_8X 8
+#define CLK_PLL_VIDEO0 9
+#define CLK_PLL_VIDEO0_2X 10
+#define CLK_PLL_VE 11
+#define CLK_PLL_DDR_BASE 12
+#define CLK_PLL_DDR 13
+#define CLK_PLL_DDR_OTHER 14
+#define CLK_PLL_PERIPH 15
+#define CLK_PLL_VIDEO1 16
+#define CLK_PLL_VIDEO1_2X 17
+#define CLK_OSC24M 18
+#define CLK_CPU 19
+#define CLK_AXI 20
+#define CLK_AHB 21
+#define CLK_APB0 22
+#define CLK_APB1 23
+#define CLK_DRAM_AXI 24
+#define CLK_AHB_OTG 25
+#define CLK_AHB_EHCI 26
+#define CLK_AHB_OHCI 27
+#define CLK_AHB_SS 28
+#define CLK_AHB_DMA 29
+#define CLK_AHB_BIST 30
+#define CLK_AHB_MMC0 31
+#define CLK_AHB_MMC1 32
+#define CLK_AHB_MMC2 33
+#define CLK_AHB_NAND 34
+#define CLK_AHB_SDRAM 35
+#define CLK_AHB_EMAC 36
+#define CLK_AHB_TS 37
+#define CLK_AHB_SPI0 38
+#define CLK_AHB_SPI1 39
+#define CLK_AHB_SPI2 40
+#define CLK_AHB_GPS 41
+#define CLK_AHB_HSTIMER 42
+#define CLK_AHB_VE 43
+#define CLK_AHB_TVE 44
+#define CLK_AHB_LCD 45
+#define CLK_AHB_CSI 46
+#define CLK_AHB_HDMI 47
+#define CLK_AHB_DE_BE 48
+#define CLK_AHB_DE_FE 49
+#define CLK_AHB_IEP 50
+#define CLK_AHB_GPU 51
+#define CLK_APB0_CODEC 52
+#define CLK_APB0_SPDIF 53
+#define CLK_APB0_I2S 54
+#define CLK_APB0_PIO 55
+#define CLK_APB0_IR 56
+#define CLK_APB0_KEYPAD 57
+#define CLK_APB1_I2C0 58
+#define CLK_APB1_I2C1 59
+#define CLK_APB1_I2C2 60
+#define CLK_APB1_UART0 61
+#define CLK_APB1_UART1 62
+#define CLK_APB1_UART2 63
+#define CLK_APB1_UART3 64
+#define CLK_NAND 65
+#define CLK_MMC0 66
+#define CLK_MMC1 67
+#define CLK_MMC2 68
+#define CLK_TS 69
+#define CLK_SS 70
+#define CLK_CE 71
+#define CLK_SPI0 72
+#define CLK_SPI1 73
+#define CLK_SPI2 74
+#define CLK_IR 75
+#define CLK_I2S 76
+#define CLK_SPDIF 77
+#define CLK_KEYPAD 78
+#define CLK_USB_OHCI 79
+#define CLK_USB_PHY0 80
+#define CLK_USB_PHY1 81
+#define CLK_GPS 82
+#define CLK_DRAM_VE 83
+#define CLK_DRAM_CSI 84
+#define CLK_DRAM_TS 85
+#define CLK_DRAM_TVE 86
+#define CLK_DRAM_DE_FE 87
+#define CLK_DRAM_DE_BE 88
+#define CLK_DRAM_ACE 89
+#define CLK_DRAM_IEP 90
+#define CLK_DE_BE 91
+#define CLK_DE_FE 92
+#define CLK_TCON_CH0 93
+#define CLK_TCON_CH1_SCLK 94
+#define CLK_TCON_CH1 95
+#define CLK_CSI 96
+#define CLK_VE 97
+#define CLK_CODEC 98
+#define CLK_AVS 99
+#define CLK_HDMI 100
+#define CLK_GPU 101
+#define CLK_MBUS 102
+#define CLK_IEP 103
+
+#define CLK_NUMBER (CLK_IEP + 1)
+
+#endif /* _CCU_SUN5I_H_ */
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 5/10] clk: sunxi-ng: Implement multiplier maximum
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/ccu_mult.h | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_mult.h b/drivers/clk/sunxi-ng/ccu_mult.h
index 84839641dfdf..524acddfcb2e 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.h
+++ b/drivers/clk/sunxi-ng/ccu_mult.h
@@ -10,24 +10,26 @@ struct ccu_mult_internal {
u8 shift;
u8 width;
u8 min;
+ u8 max;
};
-#define _SUNXI_CCU_MULT_OFFSET_MIN(_shift, _width, _offset, _min) \
+#define _SUNXI_CCU_MULT_OFFSET_MIN_MAX(_shift, _width, _offset, _min, _max) \
{ \
.min = _min, \
+ .max = _max, \
.offset = _offset, \
.shift = _shift, \
.width = _width, \
}
#define _SUNXI_CCU_MULT_MIN(_shift, _width, _min) \
- _SUNXI_CCU_MULT_OFFSET_MIN(_shift, _width, 1, _min)
+ _SUNXI_CCU_MULT_OFFSET_MIN_MAX(_shift, _width, 1, _min, 0)
#define _SUNXI_CCU_MULT_OFFSET(_shift, _width, _offset) \
- _SUNXI_CCU_MULT_OFFSET_MIN(_shift, _width, _offset, 1)
+ _SUNXI_CCU_MULT_OFFSET_MIN_MAX(_shift, _width, _offset, 1, 0)
#define _SUNXI_CCU_MULT(_shift, _width) \
- _SUNXI_CCU_MULT_OFFSET_MIN(_shift, _width, 1, 1)
+ _SUNXI_CCU_MULT_OFFSET_MIN_MAX(_shift, _width, 1, 1, 0)
struct ccu_mult {
u32 enable;
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 4/10] clk: sunxi-ng: Add clocks and resets indices for sun5i
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
The SoCs part of the sun5i family share the DTs, so we need consistant
indices in order to still share the DTs.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
include/dt-bindings/clock/sun5i-ccu.h | 126 +++++++++++++++++++++++++++-
include/dt-bindings/reset/sun5i-ccu.h | 32 +++++++-
2 files changed, 158 insertions(+), 0 deletions(-)
create mode 100644 include/dt-bindings/clock/sun5i-ccu.h
create mode 100644 include/dt-bindings/reset/sun5i-ccu.h
diff --git a/include/dt-bindings/clock/sun5i-ccu.h b/include/dt-bindings/clock/sun5i-ccu.h
new file mode 100644
index 000000000000..32735b2cf29c
--- /dev/null
+++ b/include/dt-bindings/clock/sun5i-ccu.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2016 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN5I_H_
+#define _CCU_SUN5I_H_
+
+#define CLK_HOSC 1
+#define CLK_OSC3M 2
+#define CLK_PLL_CORE 3
+#define CLK_PLL_AUDIO_BASE 4
+#define CLK_PLL_AUDIO 5
+#define CLK_PLL_AUDIO_2X 6
+#define CLK_PLL_AUDIO_4X 7
+#define CLK_PLL_AUDIO_8X 8
+#define CLK_PLL_VIDEO0 9
+#define CLK_PLL_VIDEO0_2X 10
+#define CLK_PLL_VE 11
+#define CLK_PLL_DDR_BASE 12
+#define CLK_PLL_DDR 13
+#define CLK_PLL_DDR_OTHER 14
+#define CLK_PLL_PERIPH 15
+#define CLK_PLL_VIDEO1 16
+#define CLK_PLL_VIDEO1_2X 17
+#define CLK_OSC24M 18
+#define CLK_CPU 19
+#define CLK_AXI 20
+#define CLK_AHB 21
+#define CLK_APB0 22
+#define CLK_APB1 23
+#define CLK_DRAM_AXI 24
+#define CLK_AHB_OTG 25
+#define CLK_AHB_EHCI 26
+#define CLK_AHB_OHCI 27
+#define CLK_AHB_SS 28
+#define CLK_AHB_DMA 29
+#define CLK_AHB_BIST 30
+#define CLK_AHB_MMC0 31
+#define CLK_AHB_MMC1 32
+#define CLK_AHB_MMC2 33
+#define CLK_AHB_NAND 34
+#define CLK_AHB_SDRAM 35
+#define CLK_AHB_EMAC 36
+#define CLK_AHB_TS 37
+#define CLK_AHB_SPI0 38
+#define CLK_AHB_SPI1 39
+#define CLK_AHB_SPI2 40
+#define CLK_AHB_GPS 41
+#define CLK_AHB_HSTIMER 42
+#define CLK_AHB_VE 43
+#define CLK_AHB_TVE 44
+#define CLK_AHB_LCD 45
+#define CLK_AHB_CSI 46
+#define CLK_AHB_HDMI 47
+#define CLK_AHB_DE_BE 48
+#define CLK_AHB_DE_FE 49
+#define CLK_AHB_IEP 50
+#define CLK_AHB_GPU 51
+#define CLK_APB0_CODEC 52
+#define CLK_APB0_SPDIF 53
+#define CLK_APB0_I2S 54
+#define CLK_APB0_PIO 55
+#define CLK_APB0_IR 56
+#define CLK_APB0_KEYPAD 57
+#define CLK_APB1_I2C0 58
+#define CLK_APB1_I2C1 59
+#define CLK_APB1_I2C2 60
+#define CLK_APB1_UART0 61
+#define CLK_APB1_UART1 62
+#define CLK_APB1_UART2 63
+#define CLK_APB1_UART3 64
+#define CLK_NAND 65
+#define CLK_MMC0 66
+#define CLK_MMC1 67
+#define CLK_MMC2 68
+#define CLK_TS 69
+#define CLK_SS 70
+#define CLK_CE 71
+#define CLK_SPI0 72
+#define CLK_SPI1 73
+#define CLK_SPI2 74
+#define CLK_IR 75
+#define CLK_I2S 76
+#define CLK_SPDIF 77
+#define CLK_KEYPAD 78
+#define CLK_USB_OHCI 79
+#define CLK_USB_PHY0 80
+#define CLK_USB_PHY1 81
+#define CLK_GPS 82
+#define CLK_DRAM_VE 83
+#define CLK_DRAM_CSI 84
+#define CLK_DRAM_TS 85
+#define CLK_DRAM_TVE 86
+#define CLK_DRAM_DE_FE 87
+#define CLK_DRAM_DE_BE 88
+#define CLK_DRAM_ACE 89
+#define CLK_DRAM_IEP 90
+#define CLK_DE_BE 91
+#define CLK_DE_FE 92
+#define CLK_TCON_CH0 93
+#define CLK_TCON_CH1_SCLK 94
+#define CLK_TCON_CH1 95
+#define CLK_CSI 96
+#define CLK_VE 97
+#define CLK_CODEC 98
+#define CLK_AVS 99
+#define CLK_HDMI 100
+#define CLK_GPU 101
+#define CLK_MBUS 102
+#define CLK_IEP 103
+
+#define CLK_NUMBER (CLK_IEP + 1)
+
+#endif /* _CCU_SUN5I_H_ */
diff --git a/include/dt-bindings/reset/sun5i-ccu.h b/include/dt-bindings/reset/sun5i-ccu.h
new file mode 100644
index 000000000000..c2b9726b5026
--- /dev/null
+++ b/include/dt-bindings/reset/sun5i-ccu.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2016 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _RST_SUN5I_H_
+#define _RST_SUN5I_H_
+
+#define RST_USB_PHY0 0
+#define RST_USB_PHY1 1
+#define RST_GPS 2
+#define RST_DE_BE 3
+#define RST_DE_FE 4
+#define RST_TVE 5
+#define RST_LCD 6
+#define RST_CSI 7
+#define RST_VE 8
+#define RST_GPU 9
+#define RST_IEP 10
+
+#endif /* _RST_SUN5I_H_ */
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 3/10] clk: sunxi-ng: Implement multiplier offsets
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
The multipliers we've seen so far all had an offset of one. However, on the
earlier Allwinner SoCs, the multipliers could have no offset at all.
Implement an additional field for the multipliers to specify that offset.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/ccu_div.h | 10 +++++++++-
drivers/clk/sunxi-ng/ccu_mp.c | 10 +++++++---
drivers/clk/sunxi-ng/ccu_mult.c | 4 ++--
drivers/clk/sunxi-ng/ccu_mult.h | 20 ++++++++++++++------
drivers/clk/sunxi-ng/ccu_nk.c | 14 ++++++++++----
drivers/clk/sunxi-ng/ccu_nkm.c | 18 +++++++++++++-----
drivers/clk/sunxi-ng/ccu_nkmp.c | 17 +++++++++++++----
drivers/clk/sunxi-ng/ccu_nm.c | 13 ++++++++++---
8 files changed, 78 insertions(+), 28 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index 06540f7cf41c..08d074451204 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -41,6 +41,7 @@ struct ccu_div_internal {
u8 width;
u32 max;
+ u32 offset;
u32 flags;
@@ -58,20 +59,27 @@ struct ccu_div_internal {
#define _SUNXI_CCU_DIV_TABLE(_shift, _width, _table) \
_SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, _table, 0)
-#define _SUNXI_CCU_DIV_MAX_FLAGS(_shift, _width, _max, _flags) \
+#define _SUNXI_CCU_DIV_OFFSET_MAX_FLAGS(_shift, _width, _off, _max, _flags) \
{ \
.shift = _shift, \
.width = _width, \
.flags = _flags, \
.max = _max, \
+ .offset = _off, \
}
+#define _SUNXI_CCU_DIV_MAX_FLAGS(_shift, _width, _max, _flags) \
+ _SUNXI_CCU_DIV_OFFSET_MAX_FLAGS(_shift, _width, 1, _max, _flags)
+
#define _SUNXI_CCU_DIV_FLAGS(_shift, _width, _flags) \
_SUNXI_CCU_DIV_MAX_FLAGS(_shift, _width, 0, _flags)
#define _SUNXI_CCU_DIV_MAX(_shift, _width, _max) \
_SUNXI_CCU_DIV_MAX_FLAGS(_shift, _width, _max, 0)
+#define _SUNXI_CCU_DIV_OFFSET(_shift, _width, _offset) \
+ _SUNXI_CCU_DIV_OFFSET_MAX_FLAGS(_shift, _width, _offset, 0, 0)
+
#define _SUNXI_CCU_DIV(_shift, _width) \
_SUNXI_CCU_DIV_FLAGS(_shift, _width, 0)
diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
index ebb1b31568a5..22c2ca7a2a22 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.c
+++ b/drivers/clk/sunxi-ng/ccu_mp.c
@@ -89,11 +89,14 @@ static unsigned long ccu_mp_recalc_rate(struct clk_hw *hw,
m = reg >> cmp->m.shift;
m &= (1 << cmp->m.width) - 1;
+ m += cmp->m.offset;
+ if (!m)
+ m++;
p = reg >> cmp->p.shift;
p &= (1 << cmp->p.width) - 1;
- return (parent_rate >> p) / (m + 1);
+ return (parent_rate >> p) / m;
}
static int ccu_mp_determine_rate(struct clk_hw *hw,
@@ -124,9 +127,10 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
reg = readl(cmp->common.base + cmp->common.reg);
reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
reg &= ~GENMASK(cmp->p.width + cmp->p.shift - 1, cmp->p.shift);
+ reg |= (m - cmp->m.offset) << cmp->m.shift;
+ reg |= ilog2(p) << cmp->p.shift;
- writel(reg | (ilog2(p) << cmp->p.shift) | ((m - 1) << cmp->m.shift),
- cmp->common.base + cmp->common.reg);
+ writel(reg, cmp->common.base + cmp->common.reg);
spin_unlock_irqrestore(cmp->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
index 826302464650..bf5e11c803f9 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.c
+++ b/drivers/clk/sunxi-ng/ccu_mult.c
@@ -85,7 +85,7 @@ static unsigned long ccu_mult_recalc_rate(struct clk_hw *hw,
ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
&parent_rate);
- return parent_rate * (val + 1);
+ return parent_rate * (val + cm->mult.offset);
}
static int ccu_mult_determine_rate(struct clk_hw *hw,
@@ -122,7 +122,7 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
reg = readl(cm->common.base + cm->common.reg);
reg &= ~GENMASK(cm->mult.width + cm->mult.shift - 1, cm->mult.shift);
- writel(reg | ((_cm.mult - 1) << cm->mult.shift),
+ writel(reg | ((_cm.mult - cm->mult.offset) << cm->mult.shift),
cm->common.base + cm->common.reg);
spin_unlock_irqrestore(cm->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_mult.h b/drivers/clk/sunxi-ng/ccu_mult.h
index bd2e38b5a32a..84839641dfdf 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.h
+++ b/drivers/clk/sunxi-ng/ccu_mult.h
@@ -6,20 +6,28 @@
#include "ccu_mux.h"
struct ccu_mult_internal {
+ u8 offset;
u8 shift;
u8 width;
u8 min;
};
-#define _SUNXI_CCU_MULT_MIN(_shift, _width, _min) \
- { \
- .shift = _shift, \
- .width = _width, \
- .min = _min, \
+#define _SUNXI_CCU_MULT_OFFSET_MIN(_shift, _width, _offset, _min) \
+ { \
+ .min = _min, \
+ .offset = _offset, \
+ .shift = _shift, \
+ .width = _width, \
}
+#define _SUNXI_CCU_MULT_MIN(_shift, _width, _min) \
+ _SUNXI_CCU_MULT_OFFSET_MIN(_shift, _width, 1, _min)
+
+#define _SUNXI_CCU_MULT_OFFSET(_shift, _width, _offset) \
+ _SUNXI_CCU_MULT_OFFSET_MIN(_shift, _width, _offset, 1)
+
#define _SUNXI_CCU_MULT(_shift, _width) \
- _SUNXI_CCU_MULT_MIN(_shift, _width, 1)
+ _SUNXI_CCU_MULT_OFFSET_MIN(_shift, _width, 1, 1)
struct ccu_mult {
u32 enable;
diff --git a/drivers/clk/sunxi-ng/ccu_nk.c b/drivers/clk/sunxi-ng/ccu_nk.c
index eaf0fdf78d2b..90117d3ead8c 100644
--- a/drivers/clk/sunxi-ng/ccu_nk.c
+++ b/drivers/clk/sunxi-ng/ccu_nk.c
@@ -76,12 +76,17 @@ static unsigned long ccu_nk_recalc_rate(struct clk_hw *hw,
n = reg >> nk->n.shift;
n &= (1 << nk->n.width) - 1;
+ n += nk->n.offset;
+ if (!n)
+ n++;
k = reg >> nk->k.shift;
k &= (1 << nk->k.width) - 1;
+ k += nk->k.offset;
+ if (!k)
+ k++;
- rate = parent_rate * (n + 1) * (k + 1);
-
+ rate = parent_rate * n * k;
if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate /= nk->fixed_post_div;
@@ -135,8 +140,9 @@ static int ccu_nk_set_rate(struct clk_hw *hw, unsigned long rate,
reg &= ~GENMASK(nk->n.width + nk->n.shift - 1, nk->n.shift);
reg &= ~GENMASK(nk->k.width + nk->k.shift - 1, nk->k.shift);
- writel(reg | ((_nk.k - 1) << nk->k.shift) | ((_nk.n - 1) << nk->n.shift),
- nk->common.base + nk->common.reg);
+ reg |= (_nk.k - nk->k.offset) << nk->k.shift;
+ reg |= (_nk.n - nk->n.offset) << nk->n.shift;
+ writel(reg, nk->common.base + nk->common.reg);
spin_unlock_irqrestore(nk->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
index fd3c6a9d987c..e0b4c914d7ac 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.c
+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
@@ -82,14 +82,23 @@ static unsigned long ccu_nkm_recalc_rate(struct clk_hw *hw,
n = reg >> nkm->n.shift;
n &= (1 << nkm->n.width) - 1;
+ n += nkm->n.offset;
+ if (!n)
+ n++;
k = reg >> nkm->k.shift;
k &= (1 << nkm->k.width) - 1;
+ k += nkm->k.offset;
+ if (!k)
+ k++;
m = reg >> nkm->m.shift;
m &= (1 << nkm->m.width) - 1;
+ m += nkm->m.offset;
+ if (!m)
+ m++;
- rate = parent_rate * (n + 1) * (k + 1) / (m + 1);
+ rate = parent_rate * n * k / m;
if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate /= nkm->fixed_post_div;
@@ -156,10 +165,9 @@ static int ccu_nkm_set_rate(struct clk_hw *hw, unsigned long rate,
reg &= ~GENMASK(nkm->k.width + nkm->k.shift - 1, nkm->k.shift);
reg &= ~GENMASK(nkm->m.width + nkm->m.shift - 1, nkm->m.shift);
- reg |= (_nkm.n - 1) << nkm->n.shift;
- reg |= (_nkm.k - 1) << nkm->k.shift;
- reg |= (_nkm.m - 1) << nkm->m.shift;
-
+ reg |= (_nkm.n - nkm->n.offset) << nkm->n.shift;
+ reg |= (_nkm.k - nkm->k.offset) << nkm->k.shift;
+ reg |= (_nkm.m - nkm->m.offset) << nkm->m.shift;
writel(reg, nkm->common.base + nkm->common.reg);
spin_unlock_irqrestore(nkm->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
index 684c42da3ebb..da2bba02b845 100644
--- a/drivers/clk/sunxi-ng/ccu_nkmp.c
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
@@ -88,17 +88,26 @@ static unsigned long ccu_nkmp_recalc_rate(struct clk_hw *hw,
n = reg >> nkmp->n.shift;
n &= (1 << nkmp->n.width) - 1;
+ n += nkmp->n.offset;
+ if (!n)
+ n++;
k = reg >> nkmp->k.shift;
k &= (1 << nkmp->k.width) - 1;
+ k += nkmp->k.offset;
+ if (!k)
+ k++;
m = reg >> nkmp->m.shift;
m &= (1 << nkmp->m.width) - 1;
+ m += nkmp->m.offset;
+ if (!m)
+ m++;
p = reg >> nkmp->p.shift;
p &= (1 << nkmp->p.width) - 1;
- return (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1);
+ return parent_rate * n * k >> p / m;
}
static long ccu_nkmp_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -148,9 +157,9 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
reg &= ~GENMASK(nkmp->m.width + nkmp->m.shift - 1, nkmp->m.shift);
reg &= ~GENMASK(nkmp->p.width + nkmp->p.shift - 1, nkmp->p.shift);
- reg |= (_nkmp.n - 1) << nkmp->n.shift;
- reg |= (_nkmp.k - 1) << nkmp->k.shift;
- reg |= (_nkmp.m - 1) << nkmp->m.shift;
+ reg |= (_nkmp.n - nkmp->n.offset) << nkmp->n.shift;
+ reg |= (_nkmp.k - nkmp->k.offset) << nkmp->k.shift;
+ reg |= (_nkmp.m - nkmp->m.offset) << nkmp->m.shift;
reg |= ilog2(_nkmp.p) << nkmp->p.shift;
writel(reg, nkmp->common.base + nkmp->common.reg);
diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index c9f3b6c982f0..158d74e0215f 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -80,11 +80,17 @@ static unsigned long ccu_nm_recalc_rate(struct clk_hw *hw,
n = reg >> nm->n.shift;
n &= (1 << nm->n.width) - 1;
+ n += nm->n.offset;
+ if (!n)
+ n++;
m = reg >> nm->m.shift;
m &= (1 << nm->m.width) - 1;
+ m += nm->m.offset;
+ if (!m)
+ m++;
- return parent_rate * (n + 1) / (m + 1);
+ return parent_rate * n / m;
}
static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -129,8 +135,9 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
reg &= ~GENMASK(nm->n.width + nm->n.shift - 1, nm->n.shift);
reg &= ~GENMASK(nm->m.width + nm->m.shift - 1, nm->m.shift);
- writel(reg | ((_nm.m - 1) << nm->m.shift) | ((_nm.n - 1) << nm->n.shift),
- nm->common.base + nm->common.reg);
+ reg |= (_nm.n - nm->n.offset) << nm->n.shift;
+ reg |= (_nm.m - nm->m.offset) << nm->m.shift;
+ writel(reg, nm->common.base + nm->common.reg);
spin_unlock_irqrestore(nm->common.lock, flags);
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 2/10] clk: sunxi-ng: nkm: Deal with fixed post dividers
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/ccu_nkm.c | 17 ++++++++++++++---
drivers/clk/sunxi-ng/ccu_nkm.h | 2 ++
2 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
index 9b840a47a94d..fd3c6a9d987c 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.c
+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
@@ -75,7 +75,7 @@ static unsigned long ccu_nkm_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct ccu_nkm *nkm = hw_to_ccu_nkm(hw);
- unsigned long n, m, k;
+ unsigned long rate, n, m, k;
u32 reg;
reg = readl(nkm->common.base + nkm->common.reg);
@@ -89,7 +89,11 @@ static unsigned long ccu_nkm_recalc_rate(struct clk_hw *hw,
m = reg >> nkm->m.shift;
m &= (1 << nkm->m.width) - 1;
- return parent_rate * (n + 1) * (k + 1) / (m + 1);
+ rate = parent_rate * (n + 1) * (k + 1) / (m + 1);
+ if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= nkm->fixed_post_div;
+
+ return rate;
}
static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
@@ -100,6 +104,9 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
struct ccu_nkm *nkm = data;
struct _ccu_nkm _nkm;
+ if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate *= nkm->fixed_post_div;
+
_nkm.min_n = nkm->n.min;
_nkm.max_n = 1 << nkm->n.width;
_nkm.min_k = nkm->k.min;
@@ -109,7 +116,11 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
ccu_nkm_find_best(parent_rate, rate, &_nkm);
- return parent_rate * _nkm.n * _nkm.k / _nkm.m;
+ rate = parent_rate * _nkm.n * _nkm.k / _nkm.m;
+ if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate = rate / nkm->fixed_post_div;
+
+ return rate;
}
static int ccu_nkm_determine_rate(struct clk_hw *hw,
diff --git a/drivers/clk/sunxi-ng/ccu_nkm.h b/drivers/clk/sunxi-ng/ccu_nkm.h
index 34580894f4d1..0f1dbca25719 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.h
+++ b/drivers/clk/sunxi-ng/ccu_nkm.h
@@ -32,6 +32,8 @@ struct ccu_nkm {
struct ccu_mult_internal n;
struct ccu_mult_internal k;
struct ccu_div_internal m;
+
+ unsigned int fixed_post_div;
struct ccu_mux_internal mux;
struct ccu_common common;
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 1/10] clk: sunxi-ng: multiplier: Add fractionnal support
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.326f50aecc25fbe292184527b52a1e3172aba9cf.1478625788.git-series.maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/ccu_mult.c | 8 ++++++++
drivers/clk/sunxi-ng/ccu_mult.h | 2 ++
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
index 678b6cb49f01..826302464650 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.c
+++ b/drivers/clk/sunxi-ng/ccu_mult.c
@@ -75,6 +75,9 @@ static unsigned long ccu_mult_recalc_rate(struct clk_hw *hw,
unsigned long val;
u32 reg;
+ if (ccu_frac_helper_is_enabled(&cm->common, &cm->frac))
+ return ccu_frac_helper_read_rate(&cm->common, &cm->frac);
+
reg = readl(cm->common.base + cm->common.reg);
val = reg >> cm->mult.shift;
val &= (1 << cm->mult.width) - 1;
@@ -102,6 +105,11 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long flags;
u32 reg;
+ if (ccu_frac_helper_has_rate(&cm->common, &cm->frac, rate))
+ return ccu_frac_helper_set_rate(&cm->common, &cm->frac, rate);
+ else
+ ccu_frac_helper_disable(&cm->common, &cm->frac);
+
ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
&parent_rate);
diff --git a/drivers/clk/sunxi-ng/ccu_mult.h b/drivers/clk/sunxi-ng/ccu_mult.h
index c1a2134bdc71..bd2e38b5a32a 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.h
+++ b/drivers/clk/sunxi-ng/ccu_mult.h
@@ -2,6 +2,7 @@
#define _CCU_MULT_H_
#include "ccu_common.h"
+#include "ccu_frac.h"
#include "ccu_mux.h"
struct ccu_mult_internal {
@@ -23,6 +24,7 @@ struct ccu_mult_internal {
struct ccu_mult {
u32 enable;
+ struct ccu_frac_internal frac;
struct ccu_mult_internal mult;
struct ccu_mux_internal mux;
struct ccu_common common;
--
git-series 0.8.11
^ permalink raw reply related
* [PATCH 0/10] ARM: sun5i: Convert sun5i SoCs to sunxi-ng
From: Maxime Ripard @ 2016-11-08 17:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This is yet another serie bringing more SoCs into the sunxi-ng world.
This is pretty common stuff. Dealing with more corner cases, and adding the
drivers for the SoCs. The A10 and A20 should be pretty close, and pretty
easy to support after that.
Let me know what you think,
Maxime
Maxime Ripard (10):
clk: sunxi-ng: multiplier: Add fractionnal support
clk: sunxi-ng: nkm: Deal with fixed post dividers
clk: sunxi-ng: Implement multiplier offsets
clk: sunxi-ng: Add clocks and resets indices for sun5i
clk: sunxi-ng: Implement multiplier maximum
clk: sunxi-ng: Add A10s CCU driver
clk: sunxi-ng: Add A13 CCU driver
clk: sunxi-ng: Add GR8 driver
ARM: sun5i: Convert to CCU
ARM: gr8: Convert to CCU
arch/arm/boot/dts/ntc-gr8.dtsi | 518 ++-----------------
arch/arm/boot/dts/sun5i-a10s.dtsi | 94 +---
arch/arm/boot/dts/sun5i-a13.dtsi | 140 +-----
arch/arm/boot/dts/sun5i-r8.dtsi | 10 +-
arch/arm/boot/dts/sun5i.dtsi | 368 +------------
drivers/clk/sunxi-ng/Kconfig | 30 +-
drivers/clk/sunxi-ng/Makefile | 3 +-
drivers/clk/sunxi-ng/ccu-sun5i-a10s.c | 755 +++++++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun5i-a13.c | 681 ++++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun5i-gr8.c | 684 ++++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun5i.h | 129 +++++-
drivers/clk/sunxi-ng/ccu_div.h | 10 +-
drivers/clk/sunxi-ng/ccu_mp.c | 10 +-
drivers/clk/sunxi-ng/ccu_mult.c | 12 +-
drivers/clk/sunxi-ng/ccu_mult.h | 24 +-
drivers/clk/sunxi-ng/ccu_nk.c | 14 +-
drivers/clk/sunxi-ng/ccu_nkm.c | 33 +-
drivers/clk/sunxi-ng/ccu_nkm.h | 2 +-
drivers/clk/sunxi-ng/ccu_nkmp.c | 17 +-
drivers/clk/sunxi-ng/ccu_nm.c | 13 +-
include/dt-bindings/clock/sun5i-ccu.h | 126 +++++-
include/dt-bindings/reset/sun5i-ccu.h | 32 +-
22 files changed, 2690 insertions(+), 1015 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i-a10s.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i-a13.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i-gr8.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i.h
create mode 100644 include/dt-bindings/clock/sun5i-ccu.h
create mode 100644 include/dt-bindings/reset/sun5i-ccu.h
base-commit: bc5952be2d424b75ed11ff599b70bc9604e98d42
--
git-series 0.8.11
^ permalink raw reply
* [PATCH RFC 00/12] tda998x updates
From: Jon Medhurst (Tixy) @ 2016-11-08 17:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161108133411.GA31754@n2100.armlinux.org.uk>
On Tue, 2016-11-08 at 13:34 +0000, Russell King - ARM Linux wrote:
> On Tue, Nov 08, 2016 at 01:32:15PM +0000, Russell King - ARM Linux wrote:
> > Unfortunately, my drm-tda998x-devel branch is slightly out of date with
> > these patches it's the original set of 10 patches. I've not pushed
> > these ones out to that branch yet, as I've three additional patches on
> > top of these which aren't "ready" for pushing out.
>
> Here's the delta between the branch and what I just posted:
>
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
[...]
I have a working setup for HDMI audio on Juno an would like to test this
series but am struggling to work out which patches to apply in what
order to what branch, can you be specific? (I've tried various
combinations of patches series from the list, drm-tda998x-devel, and the
diff you posted)
Thanks
--
Tixy
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox