* [PATCH v6 13/16] drivers: iommu: arm-smmu: add IORT configuration
From: Tomasz Nowicki @ 2016-11-09 13:24 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161018160414.1228-14-lorenzo.pieralisi@arm.com>
Hi Lorenzo,
On 18.10.2016 18:04, Lorenzo Pieralisi wrote:
> In ACPI bases systems, in order to be able to create platform
> devices and initialize them for ARM SMMU components, the IORT
> kernel implementation requires a set of static functions to be
> used by the IORT kernel layer to configure platform devices for
> ARM SMMU components.
>
> Add static configuration functions to the IORT kernel layer for
> the ARM SMMU components, so that the ARM SMMU driver can
> initialize its respective platform device by relying on the IORT
> kernel infrastructure and by adding a corresponding ACPI device
> early probe section entry.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Joerg Roedel <joro@8bytes.org>
> ---
> drivers/acpi/arm64/iort.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/iommu/arm-smmu.c | 84 ++++++++++++++++++++++++++++++++++++++++++++++-
> include/linux/acpi_iort.h | 3 ++
> 3 files changed, 167 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index ea90bc8..04cc5f7 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -548,6 +548,78 @@ static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
> return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
> }
>
[...]
> +
> +static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
> + struct arm_smmu_device *smmu)
> +{
> + struct device *dev = smmu->dev;
> + struct acpi_iort_node *node =
> + *(struct acpi_iort_node **)dev_get_platdata(dev);
> + struct acpi_iort_smmu *iort_smmu;
> + u64 *glb_irq;
> + int ret;
> +
> + /* Retrieve SMMU1/2 specific data */
> + iort_smmu = (struct acpi_iort_smmu *)node->node_data;
> +
> + ret = acpi_smmu_get_data(iort_smmu->model, &smmu->version,
> + &smmu->model);
> + if (ret < 0)
> + return ret;
> +
> + glb_irq = ACPI_ADD_PTR(u64, iort_smmu,
> + iort_smmu->global_interrupt_offset);
One bug that I found:
- glb_irq = ACPI_ADD_PTR(u64, iort_smmu,
- iort_smmu->global_interrupt_offset);
+ glb_irq = ACPI_ADD_PTR(u64, node,
+ iort_smmu->global_interrupt_offset);
With this fix, I run VM with several PCI devices (NIC, SATA) in
passthrough mode successfully on ACPI host using ThunderX 1-socket board.
Also, for my tests I used Eric's patches:
https://github.com/eauger/linux/commits/v4.9-rc3-reserved-rfc-v2
Including bug fix above:
Tested-by: Tomasz Nowicki <tn@semihalf.com> for all series.
> +
> + if (!IORT_IRQ_MASK(glb_irq[1])) /* 0 means not implemented */
> + smmu->num_global_irqs = 1;
> + else
> + smmu->num_global_irqs = 2;
> +
> + if (iort_smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK)
> + smmu->features |= ARM_SMMU_FEAT_COHERENT_WALK;
> +
> + return 0;
> +}
> +#else
> +static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
> + struct arm_smmu_device *smmu)
> +{
> + return -ENODEV;
> +}
> +#endif
> +
Thanks,
Tomasz
^ permalink raw reply
* [PATCH v2 0/7] soc: renesas: Identify SoC and register with the SoC bus
From: Geert Uytterhoeven @ 2016-11-09 13:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAMuHMdV4HG0aOr4Qp_OZXU=3jLeOJ2QaMKp09a3v4489ABbRcA@mail.gmail.com>
Hi Arnd,
On Mon, Nov 7, 2016 at 10:35 AM, Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
> On Mon, Oct 31, 2016 at 12:30 PM, Geert Uytterhoeven
> <geert+renesas@glider.be> wrote:
>> Some Renesas SoCs may exist in different revisions, providing slightly
>> different functionalities (e.g. R-Car H3 ES1.x and ES2.0), and behavior
>> (errate and quirks). This needs to be catered for by drivers and/or
>> platform code. The recently proposed soc_device_match() API seems like
>> a good fit to handle this.
>>
>> This patch series implements the core infrastructure to provide SoC and
>> revision information through the SoC bus for Renesas ARM SoCs. It
>> consists of 7 patches:
>> - Patches 1-4 provide soc_device_match(), with some related fixes,
>> - Patches 5-7 implement identification of Renesas SoCs and
>> registration with the SoC bus,
>>
>> Changes compared to v1:
>> - Add Acked-by,
>> - New patches:
>> - "[4/7] base: soc: Provide a dummy implementation of
>> soc_device_match()",
>> - "[5/7] ARM: shmobile: Document DT bindings for CCCR and PRR",
>> - "[6/7] arm64: dts: r8a7795: Add device node for PRR"
>> (more similar patches available, I'm not yet spamming you all
>> with them),
>> - Drop SoC families and family names; use fixed "Renesas" instead,
>> - Drop EMEV2, which doesn't have a chip ID register, and doesn't share
>> devices with other SoCs,
>> - Drop RZ/A1H and R-CAR M1A, which don't have chip ID registers (for
>> M1A: not accessible from the ARM core?),
>> - On arm, move "select SOC_BUS" from ARCH_RENESAS to Kconfig symbols
>> for SoCs that provide a chip ID register,
>> - Build renesas-soc only if SOC_BUS is enabled,
>> - Use "renesas,prr" and "renesas,cccr" device nodes in DT if
>> available, else fall back to hardcoded addresses for compatibility
>> with existing DTBs,
>> - Remove verification of product IDs; just print the ID instead,
>> - Don't register the SoC bus if the chip ID register is missing,
>> - Change R-Mobile APE6 fallback to use PRR instead of CCCR (it has
>> both).
>>
>> Merge strategy:
>> - In theory, patches 1-4 should go through Greg's driver core tree.
>> But it's a hard dependency for all users.
>> If people agree, I can provide an immutable branch in my
>> renesas-drivers repository, to be merged by all interested parties.
>> So far I'm aware of Freescale/NXP, and Renesas.
>
> And Samsung.
> Shall I create the immutable branch now?
Arnd: are you happy with the new patches and changes?
Thanks again!
>> - Patches 5-7 obviously have to go through Simon's Renesas tree (after
>> merging the soc_device_match() core), and arm-soc.
>>
>> Tested on (machine, soc_id, optional revision):
>> EMEV2 KZM9D Board, emev2
>> Genmai, r7s72100
>> APE6EVM, r8a73a4, ES1.0
>> armadillo 800 eva, r8a7740, ES2.0
>> bockw, r8a7778
>> marzen, r8a7779, ES1.0
>> Lager, r8a7790, ES1.0
>> Koelsch, r8a7791, ES1.0
>> Porter, r8a7791, ES3.0
>> Blanche, r8a7792, ES1.1
>> Gose, r8a7793, ES1.0
>> Alt, r8a7794, ES1.0
>> Renesas Salvator-X board based on r8a7795, r8a7795, ES1.0
>> Renesas Salvator-X board based on r8a7795, r8a7795, ES1.1
>> Renesas Salvator-X board based on r8a7796, r8a7796, ES1.0
>> KZM-A9-GT, sh73a0, ES2.0
>>
>> For your convenience, this series (incl. more DT updates to add device
>> nodes for CCCR and PRR to all other Renesas ARM SoCs) is also available
>> in the topic/renesas-soc-id-v2 branch of my renesas-drivers git
>> repository at
>> git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git
>> Its first user is support for R-Car H3 ES2.0 in branch
>> topic/r8a7795-es2-v1-rebased2.
>>
>> Thanks for your comments!
>>
>> Arnd Bergmann (1):
>> base: soc: Introduce soc_device_match() interface
>>
>> Geert Uytterhoeven (6):
>> base: soc: Early register bus when needed
>> base: soc: Check for NULL SoC device attributes
>> base: soc: Provide a dummy implementation of soc_device_match()
>> ARM: shmobile: Document DT bindings for CCCR and PRR
>> arm64: dts: r8a7795: Add device node for PRR
>> soc: renesas: Identify SoC and register with the SoC bus
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
From: One Thousand Gnomes @ 2016-11-09 13:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <2368890.jTbyGqYR0M@wuerfel>
> I think it is a relatively safe assumption that there is only one
> ISA bridge. A lot of old drivers hardcode PIO or memory addresses
It's not a safe assumption for x86 at least. There are a few systems with
multiple ISA busses particularly older laptops with a docking station.
> when talking to an ISA device, so having multiple instances is
> already problematic.
PCMCIA devices handle it themselves so are ok. I'm not clear how the dual
PIIX4 configuration used in the older IBM laptop docks actually worked so
I assume the transaction went out of both bridges and providing one of
them responded the other kept silent as you simply stuffed the card into
the dock and it worked.
Alan
^ permalink raw reply
* [PATCH 11/13] ARM: dts: rockchip: replace to "max-frequency" instead of "clock-freq-min-max"
From: Heiko Stuebner @ 2016-11-09 14:05 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161103062135.10697-12-jh80.chung@samsung.com>
Am Donnerstag, 3. November 2016, 15:21:33 CET schrieb Jaehoon Chung:
> In drivers/mmc/core/host.c, there is "max-frequency" property.
> It should be same behavior. So use the "max-frequency" instead of
> "clock-freq-min-max".
>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
looks good, my veyron-pinky and rk3036-kylin still seem to work and hopefully
I haven't missed any spelling errors in the properties :-), so applied to my
dts32 branch for 4.10
Thanks
Heiko
^ permalink raw reply
* [PATCH] drm/rockchip: analogix_dp: add supports for regulators in edp IP
From: ayaka @ 2016-11-09 14:08 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <16dfbe16-eae7-8da9-4108-07e623210d35@rock-chips.com>
On 10/28/2016 05:29 PM, Randy Li wrote:
>
>
> On 10/28/2016 05:11 PM, Shawn Lin wrote:
>> On 2016/10/23 3:18, Randy Li wrote:
>>> I found if eDP_AVDD_1V0 and eDP_AVDD_1V8 are not been power at
>>> RK3288, once trying to enable the pclk clock, the kernel would dead.
>>> This patch would try to enable them first. The eDP_AVDD_1V8 more
>>> likely to be applied to eDP phy, but I have no time to confirmed
>>> it yet.
>>
>> Comfirm it or at least someone should be able to answer your
>> question, Mark?
> I just forget to ask the IC department, the TRM didn't cover that.
The IC staff have told me that the AVDD_1V8 is for phy, but AVDD_1V0 is
for both of them. I should find a way to make the power sequence correctly.
I am a little busy recently, a new patch would not be available in a
short time.
>>
>> Have you considered to add some details about vcc-supply and vccio-
>> supply for your analogix_dp-rockchip.txt ?
>>
>> From your commit msg, these two properties are more likely to be
>> required but the code itself tell me them should be optional(from the
>> point of backward compatibility, it should also be optinoal).
> Yes, I keep it optional for the same reason. Most of boards won't turn
> off those power supply and may use some fixed regulators.
>>
>>>
>>> Signed-off-by: Randy Li <ayaka@soulik.info>
>>> ---
>>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 25
>>> +++++++++++++++++++++++++
>>> 1 file changed, 25 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> index 8548e82..6bf0441 100644
>>> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> @@ -17,6 +17,7 @@
>>> #include <linux/of_device.h>
>>> #include <linux/of_graph.h>
>>> #include <linux/regmap.h>
>>> +#include <linux/regulator/consumer.h>
>>> #include <linux/reset.h>
>>> #include <linux/clk.h>
>>>
>>> @@ -70,6 +71,7 @@ struct rockchip_dp_device {
>>> struct clk *grfclk;
>>> struct regmap *grf;
>>> struct reset_control *rst;
>>> + struct regulator_bulk_data supplies[2];
>>>
>>> struct work_struct psr_work;
>>> spinlock_t psr_lock;
>>> @@ -146,6 +148,13 @@ static int rockchip_dp_poweron(struct
>>> analogix_dp_plat_data *plat_data)
>>>
>>> cancel_work_sync(&dp->psr_work);
>>>
>>> + ret = regulator_bulk_enable(ARRAY_SIZE(dp->supplies),
>>> + dp->supplies);
>>> + if (ret) {
>>> + dev_err(dp->dev, "failed to enable vdd supply %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> ret = clk_prepare_enable(dp->pclk);
>>> if (ret < 0) {
>>> dev_err(dp->dev, "failed to enable pclk %d\n", ret);
>>> @@ -168,6 +177,9 @@ static int rockchip_dp_powerdown(struct
>>> analogix_dp_plat_data *plat_data)
>>>
>>> clk_disable_unprepare(dp->pclk);
>>>
>>> + regulator_bulk_disable(ARRAY_SIZE(dp->supplies),
>>> + dp->supplies);
>>> +
>>> return 0;
>>> }
>>>
>>> @@ -323,6 +335,19 @@ static int rockchip_dp_init(struct
>>> rockchip_dp_device *dp)
>>> return PTR_ERR(dp->rst);
>>> }
>>>
>>> + dp->supplies[0].supply = "vcc";
>>> + dp->supplies[1].supply = "vccio";
>>> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dp->supplies),
>>> + dp->supplies);
>>> + if (ret < 0) {
>>> + dev_err(dev, "failed to get regulators: %d\n", ret);
>>> + }
>>> + ret = regulator_bulk_enable(ARRAY_SIZE(dp->supplies),
>>> + dp->supplies);
>>> + if (ret < 0) {
>>> + dev_err(dev, "failed to enable regulators: %d\n", ret);
>>> + }
>>> +
>>> ret = clk_prepare_enable(dp->pclk);
>>> if (ret < 0) {
>>> dev_err(dp->dev, "failed to enable pclk %d\n", ret);
>>>
>>
>>
>
^ permalink raw reply
* [PATCH 1/5] iommu: Allow taking a reference on a group directly
From: Sricharan @ 2016-11-09 14:10 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <3922e1f14d8ecb50440b2d9b0d1123f3c9307fc5.1478695557.git.robin.murphy@arm.com>
Hi,
>-----Original Message-----
>From: Robin Murphy [mailto:robin.murphy at arm.com]
>Sent: Wednesday, November 09, 2016 6:17 PM
>To: joro at 8bytes.org
>Cc: will.deacon at arm.com; sricharan at codeaurora.org; iommu at lists.linux-foundation.org; linux-arm-kernel at lists.infradead.org
>Subject: [PATCH 1/5] iommu: Allow taking a reference on a group directly
>
>iommu_group_get_for_dev() expects that the IOMMU driver's device_group
>callback return a group with a reference held for the given device.
>Whilst allocating a new group is fine, and pci_device_group() correctly
>handles reusing an existing group, there is no general means for IOMMU
>drivers doing their own group lookup to take additional references on an
>existing group pointer without having to also store device pointers or
>resort to elaborate trickery.
>
>Add an IOMMU-driver-specific function to fill the hole.
>
>Signed-off-by: Robin Murphy <robin.murphy@arm.com>
>---
> drivers/iommu/iommu.c | 14 ++++++++++++++
> include/linux/iommu.h | 1 +
> 2 files changed, 15 insertions(+)
>
>diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>index 9a2f1960873b..b0b052bc6bb5 100644
>--- a/drivers/iommu/iommu.c
>+++ b/drivers/iommu/iommu.c
>@@ -552,6 +552,20 @@ struct iommu_group *iommu_group_get(struct device *dev)
> EXPORT_SYMBOL_GPL(iommu_group_get);
>
> /**
>+ * __iommu_group_get - Increment reference on a group
>+ * @group: the group to use, must not be NULL
>+ *
>+ * This function may be called by internal iommu driver group management
>+ * when the context of a struct device pointer is not available. It is
>+ * not for general use. Returns the given group for convenience.
>+ */
>+struct iommu_group *__iommu_group_get(struct iommu_group *group)
>+{
>+ kobject_get(group->devices_kobj);
>+ return group;
>+}
>+
>+/**
Acked-by: sricharan at codeaurora.org
Regards,
Sricharan
^ permalink raw reply
* [PATCH] drm/rockchip: analogix_dp: add supports for regulators in edp IP
From: ayaka @ 2016-11-09 14:10 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <16dfbe16-eae7-8da9-4108-07e623210d35@rock-chips.com>
On 10/28/2016 05:29 PM, Randy Li wrote:
>
>
> On 10/28/2016 05:11 PM, Shawn Lin wrote:
>> On 2016/10/23 3:18, Randy Li wrote:
>>> I found if eDP_AVDD_1V0 and eDP_AVDD_1V8 are not been power at
>>> RK3288, once trying to enable the pclk clock, the kernel would dead.
>>> This patch would try to enable them first. The eDP_AVDD_1V8 more
>>> likely to be applied to eDP phy, but I have no time to confirmed
>>> it yet.
>>
>> Comfirm it or at least someone should be able to answer your
>> question, Mark?
> I just forget to ask the IC department, the TRM didn't cover that.
The IC staff have told me that the AVDD_1V8 is for phy, but AVDD_1V0 is
for both of them. I should find a way to make the power sequence correctly.
I am a little busy recently, a new patch would not be available in a
short time.
>>
>> Have you considered to add some details about vcc-supply and vccio-
>> supply for your analogix_dp-rockchip.txt ?
>>
>> From your commit msg, these two properties are more likely to be
>> required but the code itself tell me them should be optional(from the
>> point of backward compatibility, it should also be optinoal).
> Yes, I keep it optional for the same reason. Most of boards won't turn
> off those power supply and may use some fixed regulators.
>>
>>>
>>> Signed-off-by: Randy Li <ayaka@soulik.info>
>>> ---
>>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 25
>>> +++++++++++++++++++++++++
>>> 1 file changed, 25 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> index 8548e82..6bf0441 100644
>>> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> @@ -17,6 +17,7 @@
>>> #include <linux/of_device.h>
>>> #include <linux/of_graph.h>
>>> #include <linux/regmap.h>
>>> +#include <linux/regulator/consumer.h>
>>> #include <linux/reset.h>
>>> #include <linux/clk.h>
>>>
>>> @@ -70,6 +71,7 @@ struct rockchip_dp_device {
>>> struct clk *grfclk;
>>> struct regmap *grf;
>>> struct reset_control *rst;
>>> + struct regulator_bulk_data supplies[2];
>>>
>>> struct work_struct psr_work;
>>> spinlock_t psr_lock;
>>> @@ -146,6 +148,13 @@ static int rockchip_dp_poweron(struct
>>> analogix_dp_plat_data *plat_data)
>>>
>>> cancel_work_sync(&dp->psr_work);
>>>
>>> + ret = regulator_bulk_enable(ARRAY_SIZE(dp->supplies),
>>> + dp->supplies);
>>> + if (ret) {
>>> + dev_err(dp->dev, "failed to enable vdd supply %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> ret = clk_prepare_enable(dp->pclk);
>>> if (ret < 0) {
>>> dev_err(dp->dev, "failed to enable pclk %d\n", ret);
>>> @@ -168,6 +177,9 @@ static int rockchip_dp_powerdown(struct
>>> analogix_dp_plat_data *plat_data)
>>>
>>> clk_disable_unprepare(dp->pclk);
>>>
>>> + regulator_bulk_disable(ARRAY_SIZE(dp->supplies),
>>> + dp->supplies);
>>> +
>>> return 0;
>>> }
>>>
>>> @@ -323,6 +335,19 @@ static int rockchip_dp_init(struct
>>> rockchip_dp_device *dp)
>>> return PTR_ERR(dp->rst);
>>> }
>>>
>>> + dp->supplies[0].supply = "vcc";
>>> + dp->supplies[1].supply = "vccio";
>>> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dp->supplies),
>>> + dp->supplies);
>>> + if (ret < 0) {
>>> + dev_err(dev, "failed to get regulators: %d\n", ret);
>>> + }
>>> + ret = regulator_bulk_enable(ARRAY_SIZE(dp->supplies),
>>> + dp->supplies);
>>> + if (ret < 0) {
>>> + dev_err(dev, "failed to enable regulators: %d\n", ret);
>>> + }
>>> +
>>> ret = clk_prepare_enable(dp->pclk);
>>> if (ret < 0) {
>>> dev_err(dp->dev, "failed to enable pclk %d\n", ret);
>>>
>>
>>
>
^ permalink raw reply
* [PATCHv2] ARM: socfpga_defconfig: enable FS configs to support Angstrom filesystem
From: Dinh Nguyen @ 2016-11-09 14:15 UTC (permalink / raw)
To: linux-arm-kernel
systemd on the Angstrom root file system expects AUTOFS to be configured
as a module and NFSD to be statically linked into the kernel. This patch
adds the necessary configuration to get rid two "FAILED" error messages
during systemd startup.
Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: provide a more descriptive changelog
---
arch/arm/configs/socfpga_defconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 18d3ec1..2e1d254 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -116,13 +116,18 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
+CONFIG_AUTOFS4_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
--
2.8.3
^ permalink raw reply related
* [PATCH] pinctrl: single: check for any error when getting rows
From: Axel Haslam @ 2016-11-09 14:17 UTC (permalink / raw)
To: linux-arm-kernel
pinctrl_count_index_with_args returns -ENOENT not
-EINVAL. The return check would pass, and we would
try to kzalloc with a negative error size throwing
a warning.
Instead of checking for -EINVAL specifically, lets
check for any error and avoid negative size allocations.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
drivers/pinctrl/pinctrl-single.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 539f31c..56e22be 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -1228,7 +1228,7 @@ static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs,
struct pcs_function *function;
rows = pinctrl_count_index_with_args(np, name);
- if (rows == -EINVAL)
+ if (rows < 0)
return rows;
npins_in_row = pcs->width / pcs->bits_per_pin;
--
2.10.1
^ permalink raw reply related
* [PATCH v7 00/16] ACPI IORT ARM SMMU support
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
This patch series is v7 of a previous posting:
https://lkml.org/lkml/2016/10/18/506
v6 -> v7
- Rebased against v4.9-rc4
- Fixed IORT probing on ACPI systems with missing IORT table
- Fixed SMMUv1/v2 global interrupt detection
- Updated iommu_ops firmware look-up
v5 -> v6
- Rebased against v4.9-rc1
- Changed FWNODE_IOMMU to FWNODE_ACPI_STATIC
- Moved platform devices creation into IORT code
- Updated fwnode handling
- Added default dma masks initialization
v4 -> v5
- Added SMMUv1/v2 support
- Rebased against v4.8-rc5 and dependencies series
- Consolidated IORT platform devices creation
v3 -> v4
- Added single mapping API (for IORT named components)
- Fixed arm_smmu_iort_xlate() return value
- Reworked fwnode registration and platform device creation
ordering to fix probe ordering dependencies
- Added code to keep device_node ref count with new iommu
fwspec API
- Added patch to make iommu_fwspec arch agnostic
- Dropped RFC status
- Rebased against v4.8-rc2
v2 -> v3
- Rebased on top of dependencies series [1][2][3](v4.7-rc3)
- Added back reliance on ACPI early probing infrastructure
- Patch[1-3] merged through other dependent series
- Added back IOMMU fwnode generalization
- Move SMMU v3 static functions configuration to IORT code
- Implemented generic IOMMU fwspec API
- Added code to implement fwnode platform device look-up
v1 -> v2:
- Rebased on top of dependencies series [1][2][3](v4.7-rc1)
- Removed IOMMU fwnode generalization
- Implemented ARM SMMU v3 ACPI probing instead of ARM SMMU v2
owing to patch series dependencies [1]
- Moved platform device creation logic to IORT code to
generalize its usage for ARM SMMU v1-v2-v3 components
- Removed reliance on ACPI early device probing
- Created IORT specific iommu_xlate() translation hook leaving
OF code unchanged according to v1 reviews
The ACPI IORT table provides information that allows instantiating
ARM SMMU devices and carrying out id mappings between components on
ARM based systems (devices, IOMMUs, interrupt controllers).
http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
Building on basic IORT support, this patchset enables ARM SMMUs support
on ACPI systems.
Most of the code is aimed at building the required generic ACPI
infrastructure to create and enable IOMMU components and to bring
the IOMMU infrastructure for ACPI on par with DT, which is going to
make future ARM SMMU components easier to integrate.
PATCH (1) adds a FWNODE_ACPI_STATIC type to the struct fwnode_handle type.
It is required to attach a fwnode identifier to platform
devices allocated/detected through static ACPI table entries
(ie IORT tables entries).
IOMMU devices have to have an identifier to look them up
eg IOMMU core layer carrying out id translation. This can be
done through a fwnode_handle (ie IOMMU platform devices created
out of IORT tables are not ACPI devices hence they can't be
allocated as such, otherwise they would have a fwnode_handle of
type FWNODE_ACPI).
PATCH (2) makes use of the ACPI early probing API to add a linker script
section for probing devices via IORT ACPI kernel code.
PATCH (3) provides IORT support for registering IOMMU IORT node through
their fwnode handle.
PATCH (4) make of_iommu_{set/get}_ops() functions DT agnostic.
PATCH (5) convert ARM SMMU driver to use fwnode instead of of_node as
look-up and iommu_ops retrieval token.
PATCH (6) convert ARM SMMU v3 driver to use fwnode instead of of_node as
look-up and iommu_ops retrieval token.
PATCH (7) implements the of_dma_configure() API in ACPI world -
acpi_dma_configure() - and patches PCI and ACPI core code to
start making use of it.
PATCH (8) provides an IORT function to detect existence of specific type
of IORT components.
PATCH (9) creates the kernel infrastructure required to create ARM SMMU
platform devices for IORT nodes.
PATCH (10) refactors the ARM SMMU v3 driver so that the init functions are
split in a way that groups together code that probes through DT
and code that carries out HW registers FW agnostic probing, in
preparation for adding the ACPI probing path.
PATCH (11) adds ARM SMMU v3 IORT IOMMU operations to create and probe
ARM SMMU v3 components.
PATCH (12) refactors the ARM SMMU v1/v2 driver so that the init functions
are split in a way that groups together code that probes
through DT and code that carries out HW registers FW agnostic
probing, in preparation for adding the ACPI probing path.
PATCH (13) adds ARM SMMU v1/v2 IORT IOMMU operations to create and
probe ARM SMMU v1/v2 components.
PATCH (14) Extend the IORT iort_node_map_rid() to work on a type mask
instead of a single type so that the translation API can
be used on a range of components.
PATCH (15) Add IORT API to carry out id mappings for components that do
do not have an input identifier/RIDs (ie named components).
PATCH (16) provides IORT infrastructure to carry out IOMMU configuration
for devices and hook it up to the previously introduced ACPI
DMA configure API.
This patchset is provided for review/testing purposes here:
git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git acpi/iort-smmu-v7
Tested on Juno and FVP models for ARM SMMU v1 and v3 probing path.
Lorenzo Pieralisi (16):
drivers: acpi: add FWNODE_ACPI_STATIC fwnode type
drivers: acpi: iort: introduce linker section for IORT entries probing
drivers: acpi: iort: add support for IOMMU fwnode registration
drivers: iommu: make of_iommu_set/get_ops() DT agnostic
drivers: iommu: arm-smmu: convert struct device of_node to fwnode
usage
drivers: iommu: arm-smmu-v3: convert struct device of_node to fwnode
usage
drivers: acpi: implement acpi_dma_configure
drivers: acpi: iort: add node match function
drivers: acpi: iort: add support for ARM SMMU platform devices
creation
drivers: iommu: arm-smmu-v3: split probe functions into DT/generic
portions
drivers: iommu: arm-smmu-v3: add IORT configuration
drivers: iommu: arm-smmu: split probe functions into DT/generic
portions
drivers: iommu: arm-smmu: add IORT configuration
drivers: acpi: iort: replace rid map type with type mask
drivers: acpi: iort: add single mapping function
drivers: acpi: iort: introduce iort_iommu_configure
drivers/acpi/arm64/iort.c | 596 +++++++++++++++++++++++++++++++++++++-
drivers/acpi/glue.c | 4 +-
drivers/acpi/scan.c | 45 +++
drivers/iommu/arm-smmu-v3.c | 105 +++++--
drivers/iommu/arm-smmu.c | 154 ++++++++--
drivers/iommu/iommu.c | 42 +++
drivers/iommu/of_iommu.c | 39 ---
drivers/pci/probe.c | 3 +-
include/acpi/acpi_bus.h | 2 +
include/asm-generic/vmlinux.lds.h | 1 +
include/linux/acpi.h | 26 ++
include/linux/acpi_iort.h | 14 +
include/linux/fwnode.h | 3 +-
include/linux/iommu.h | 14 +
include/linux/of_iommu.h | 12 +-
15 files changed, 956 insertions(+), 104 deletions(-)
--
2.10.0
^ permalink raw reply
* [PATCH v7 01/16] drivers: acpi: add FWNODE_ACPI_STATIC fwnode type
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
On systems booting with a device tree, every struct device is associated
with a struct device_node, that provides its DT firmware representation.
The device node can be used in generic kernel contexts (eg IRQ
translation, IOMMU streamid mapping), to retrieve the properties
associated with the device and carry out kernel operations accordingly.
Owing to the 1:1 relationship between the device and its device_node,
the device_node can also be used as a look-up token for the device (eg
looking up a device through its device_node), to retrieve the device in
kernel paths where the device_node is available.
On systems booting with ACPI, the same abstraction provided by
the device_node is required to provide look-up functionality.
The struct acpi_device, that represents firmware objects in the
ACPI namespace already includes a struct fwnode_handle of
type FWNODE_ACPI as their member; the same abstraction is missing
though for devices that are instantiated out of static ACPI tables
entries (eg ARM SMMU devices).
Add a new fwnode_handle type to associate devices created out
of static ACPI table entries to the respective firmware components
and create a simple ACPI core layer interface to dynamically allocate
and free the corresponding firmware nodes so that kernel subsystems
can use it to instantiate the nodes and associate them with the
respective devices.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
---
include/linux/acpi.h | 21 +++++++++++++++++++++
include/linux/fwnode.h | 3 ++-
2 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 689a8b9..6efb13c 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -56,6 +56,27 @@ static inline acpi_handle acpi_device_handle(struct acpi_device *adev)
acpi_fwnode_handle(adev) : NULL)
#define ACPI_HANDLE(dev) acpi_device_handle(ACPI_COMPANION(dev))
+static inline struct fwnode_handle *acpi_alloc_fwnode_static(void)
+{
+ struct fwnode_handle *fwnode;
+
+ fwnode = kzalloc(sizeof(struct fwnode_handle), GFP_KERNEL);
+ if (!fwnode)
+ return NULL;
+
+ fwnode->type = FWNODE_ACPI_STATIC;
+
+ return fwnode;
+}
+
+static inline void acpi_free_fwnode_static(struct fwnode_handle *fwnode)
+{
+ if (WARN_ON(!fwnode || fwnode->type != FWNODE_ACPI_STATIC))
+ return;
+
+ kfree(fwnode);
+}
+
/**
* ACPI_DEVICE_CLASS - macro used to describe an ACPI device with
* the PCI-defined class-code information
diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h
index 8516717..8bd28ce 100644
--- a/include/linux/fwnode.h
+++ b/include/linux/fwnode.h
@@ -17,8 +17,9 @@ enum fwnode_type {
FWNODE_OF,
FWNODE_ACPI,
FWNODE_ACPI_DATA,
+ FWNODE_ACPI_STATIC,
FWNODE_PDATA,
- FWNODE_IRQCHIP,
+ FWNODE_IRQCHIP
};
struct fwnode_handle {
--
2.10.0
^ permalink raw reply related
* [PATCH v7 02/16] drivers: acpi: iort: introduce linker section for IORT entries probing
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
Since commit e647b532275b ("ACPI: Add early device probing
infrastructure") the kernel has gained the infrastructure that allows
adding linker script section entries to execute ACPI driver callbacks
(ie probe routines) for all subsystems that register a table entry
in the respective kernel section (eg clocksource, irqchip).
Since ARM IOMMU devices data is described through IORT tables when
booting with ACPI, the ARM IOMMU drivers must be made able to hook ACPI
callback routines that are called to probe IORT entries and initialize
the respective IOMMU devices.
To avoid adding driver specific hooks into IORT table initialization
code (breaking therefore code modularity - ie ACPI IORT code must be made
aware of ARM SMMU drivers ACPI init callbacks), this patch adds code
that allows ARM SMMU drivers to take advantage of the ACPI early probing
infrastructure, so that they can add linker script section entries
containing drivers callback to be executed on IORT tables detection.
Since IORT nodes are differentiated by a type, the callback routines
can easily parse the IORT table entries, check the IORT nodes and
carry out some actions whenever the IORT node type associated with
the driver specific callback is matched.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/acpi/arm64/iort.c | 13 ++++++++++---
include/asm-generic/vmlinux.lds.h | 1 +
include/linux/acpi_iort.h | 3 +++
3 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 6b81746..2c46ebc 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -361,8 +361,15 @@ void __init acpi_iort_init(void)
acpi_status status;
status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- const char *msg = acpi_format_exception(status);
- pr_err("Failed to get table, %s\n", msg);
+ if (ACPI_FAILURE(status)) {
+ if (status != AE_NOT_FOUND) {
+ const char *msg = acpi_format_exception(status);
+
+ pr_err("Failed to get table, %s\n", msg);
+ }
+
+ return;
}
+
+ acpi_probe_device_table(iort);
}
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 3074796..f9c9f3c 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -563,6 +563,7 @@
IRQCHIP_OF_MATCH_TABLE() \
ACPI_PROBE_TABLE(irqchip) \
ACPI_PROBE_TABLE(clksrc) \
+ ACPI_PROBE_TABLE(iort) \
EARLYCON_TABLE()
#define INIT_TEXT \
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index 0e32dac..d16fdda 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -39,4 +39,7 @@ static inline struct irq_domain *iort_get_device_domain(struct device *dev,
{ return NULL; }
#endif
+#define IORT_ACPI_DECLARE(name, table_id, fn) \
+ ACPI_DECLARE_PROBE_ENTRY(iort, name, table_id, 0, NULL, 0, fn)
+
#endif /* __ACPI_IORT_H__ */
--
2.10.0
^ permalink raw reply related
* [PATCH v7 03/16] drivers: acpi: iort: add support for IOMMU fwnode registration
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
The ACPI IORT table provide entries for IOMMU (aka SMMU in ARM world)
components that allow creating the kernel data structures required to
probe and initialize the IOMMU devices.
This patch provides support in the IORT kernel code to register IOMMU
components and their respective fwnode.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
---
drivers/acpi/arm64/iort.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 2c46ebc..1ac2720 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -20,7 +20,9 @@
#include <linux/acpi_iort.h>
#include <linux/kernel.h>
+#include <linux/list.h>
#include <linux/pci.h>
+#include <linux/slab.h>
struct iort_its_msi_chip {
struct list_head list;
@@ -28,6 +30,90 @@ struct iort_its_msi_chip {
u32 translation_id;
};
+struct iort_fwnode {
+ struct list_head list;
+ struct acpi_iort_node *iort_node;
+ struct fwnode_handle *fwnode;
+};
+static LIST_HEAD(iort_fwnode_list);
+static DEFINE_SPINLOCK(iort_fwnode_lock);
+
+/**
+ * iort_set_fwnode() - Create iort_fwnode and use it to register
+ * iommu data in the iort_fwnode_list
+ *
+ * @node: IORT table node associated with the IOMMU
+ * @fwnode: fwnode associated with the IORT node
+ *
+ * Returns: 0 on success
+ * <0 on failure
+ */
+static inline int iort_set_fwnode(struct acpi_iort_node *iort_node,
+ struct fwnode_handle *fwnode)
+{
+ struct iort_fwnode *np;
+
+ np = kzalloc(sizeof(struct iort_fwnode), GFP_ATOMIC);
+
+ if (WARN_ON(!np))
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&np->list);
+ np->iort_node = iort_node;
+ np->fwnode = fwnode;
+
+ spin_lock(&iort_fwnode_lock);
+ list_add_tail(&np->list, &iort_fwnode_list);
+ spin_unlock(&iort_fwnode_lock);
+
+ return 0;
+}
+
+/**
+ * iort_get_fwnode() - Retrieve fwnode associated with an IORT node
+ *
+ * @node: IORT table node to be looked-up
+ *
+ * Returns: fwnode_handle pointer on success, NULL on failure
+ */
+static inline
+struct fwnode_handle *iort_get_fwnode(struct acpi_iort_node *node)
+{
+ struct iort_fwnode *curr;
+ struct fwnode_handle *fwnode = NULL;
+
+ spin_lock(&iort_fwnode_lock);
+ list_for_each_entry(curr, &iort_fwnode_list, list) {
+ if (curr->iort_node == node) {
+ fwnode = curr->fwnode;
+ break;
+ }
+ }
+ spin_unlock(&iort_fwnode_lock);
+
+ return fwnode;
+}
+
+/**
+ * iort_delete_fwnode() - Delete fwnode associated with an IORT node
+ *
+ * @node: IORT table node associated with fwnode to delete
+ */
+static inline void iort_delete_fwnode(struct acpi_iort_node *node)
+{
+ struct iort_fwnode *curr, *tmp;
+
+ spin_lock(&iort_fwnode_lock);
+ list_for_each_entry_safe(curr, tmp, &iort_fwnode_list, list) {
+ if (curr->iort_node == node) {
+ list_del(&curr->list);
+ kfree(curr);
+ break;
+ }
+ }
+ spin_unlock(&iort_fwnode_lock);
+}
+
typedef acpi_status (*iort_find_node_callback)
(struct acpi_iort_node *node, void *context);
--
2.10.0
^ permalink raw reply related
* [PATCH v7 04/16] drivers: iommu: make of_iommu_set/get_ops() DT agnostic
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
The of_iommu_{set/get}_ops() API is used to associate a device
tree node with a specific set of IOMMU operations. The same
kernel interface is required on systems booting with ACPI, where
devices are not associated with a device tree node, therefore
the interface requires generalization.
The struct device fwnode member represents the fwnode token
associated with the device and the struct it points at is firmware
specific; regardless, it is initialized on both ACPI and DT systems
and makes an ideal candidate to use it to associate a set of IOMMU
operations to a given device, through its struct device.fwnode member
pointer.
Convert the DT specific of_iommu_{set/get}_ops() interface to
use struct device.fwnode as a look-up token, making the interface
usable on ACPI systems.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
---
drivers/iommu/iommu.c | 42 ++++++++++++++++++++++++++++++++++++++++++
drivers/iommu/of_iommu.c | 39 ---------------------------------------
include/linux/iommu.h | 14 ++++++++++++++
include/linux/of_iommu.h | 12 ++++++++++--
4 files changed, 66 insertions(+), 41 deletions(-)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 9a2f196..5c97c01 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -1615,6 +1615,48 @@ int iommu_request_dm_for_dev(struct device *dev)
return ret;
}
+struct iommu_fwentry {
+ struct list_head list;
+ struct fwnode_handle *fwnode;
+ const struct iommu_ops *ops;
+};
+static LIST_HEAD(iommu_fwentry_list);
+static DEFINE_SPINLOCK(iommu_fwentry_lock);
+
+void fwnode_iommu_set_ops(struct fwnode_handle *fwnode,
+ const struct iommu_ops *ops)
+{
+ struct iommu_fwentry *iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
+
+ if (WARN_ON(!iommu))
+ return;
+
+ if (is_of_node(fwnode))
+ of_node_get(to_of_node(fwnode));
+
+ INIT_LIST_HEAD(&iommu->list);
+ iommu->fwnode = fwnode;
+ iommu->ops = ops;
+ spin_lock(&iommu_fwentry_lock);
+ list_add_tail(&iommu->list, &iommu_fwentry_list);
+ spin_unlock(&iommu_fwentry_lock);
+}
+
+const struct iommu_ops *fwnode_iommu_get_ops(struct fwnode_handle *fwnode)
+{
+ struct iommu_fwentry *node;
+ const struct iommu_ops *ops = NULL;
+
+ spin_lock(&iommu_fwentry_lock);
+ list_for_each_entry(node, &iommu_fwentry_list, list)
+ if (node->fwnode == fwnode) {
+ ops = node->ops;
+ break;
+ }
+ spin_unlock(&iommu_fwentry_lock);
+ return ops;
+}
+
int iommu_fwspec_init(struct device *dev, struct fwnode_handle *iommu_fwnode,
const struct iommu_ops *ops)
{
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index 5b82862..0f57ddc 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -96,45 +96,6 @@ int of_get_dma_window(struct device_node *dn, const char *prefix, int index,
}
EXPORT_SYMBOL_GPL(of_get_dma_window);
-struct of_iommu_node {
- struct list_head list;
- struct device_node *np;
- const struct iommu_ops *ops;
-};
-static LIST_HEAD(of_iommu_list);
-static DEFINE_SPINLOCK(of_iommu_lock);
-
-void of_iommu_set_ops(struct device_node *np, const struct iommu_ops *ops)
-{
- struct of_iommu_node *iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
-
- if (WARN_ON(!iommu))
- return;
-
- of_node_get(np);
- INIT_LIST_HEAD(&iommu->list);
- iommu->np = np;
- iommu->ops = ops;
- spin_lock(&of_iommu_lock);
- list_add_tail(&iommu->list, &of_iommu_list);
- spin_unlock(&of_iommu_lock);
-}
-
-const struct iommu_ops *of_iommu_get_ops(struct device_node *np)
-{
- struct of_iommu_node *node;
- const struct iommu_ops *ops = NULL;
-
- spin_lock(&of_iommu_lock);
- list_for_each_entry(node, &of_iommu_list, list)
- if (node->np == np) {
- ops = node->ops;
- break;
- }
- spin_unlock(&of_iommu_lock);
- return ops;
-}
-
static int __get_pci_rid(struct pci_dev *pdev, u16 alias, void *data)
{
struct of_phandle_args *iommu_spec = data;
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 436dc21..15d5478 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -351,6 +351,9 @@ int iommu_fwspec_init(struct device *dev, struct fwnode_handle *iommu_fwnode,
const struct iommu_ops *ops);
void iommu_fwspec_free(struct device *dev);
int iommu_fwspec_add_ids(struct device *dev, u32 *ids, int num_ids);
+void fwnode_iommu_set_ops(struct fwnode_handle *fwnode,
+ const struct iommu_ops *ops);
+const struct iommu_ops *fwnode_iommu_get_ops(struct fwnode_handle *fwnode);
#else /* CONFIG_IOMMU_API */
@@ -580,6 +583,17 @@ static inline int iommu_fwspec_add_ids(struct device *dev, u32 *ids,
return -ENODEV;
}
+static inline void fwnode_iommu_set_ops(struct fwnode_handle *fwnode,
+ const struct iommu_ops *ops)
+{
+}
+
+static inline
+const struct iommu_ops *fwnode_iommu_get_ops(struct fwnode_handle *fwnode)
+{
+ return NULL;
+}
+
#endif /* CONFIG_IOMMU_API */
#endif /* __LINUX_IOMMU_H */
diff --git a/include/linux/of_iommu.h b/include/linux/of_iommu.h
index e80b9c7..7681007 100644
--- a/include/linux/of_iommu.h
+++ b/include/linux/of_iommu.h
@@ -31,8 +31,16 @@ static inline const struct iommu_ops *of_iommu_configure(struct device *dev,
#endif /* CONFIG_OF_IOMMU */
-void of_iommu_set_ops(struct device_node *np, const struct iommu_ops *ops);
-const struct iommu_ops *of_iommu_get_ops(struct device_node *np);
+static inline void of_iommu_set_ops(struct device_node *np,
+ const struct iommu_ops *ops)
+{
+ fwnode_iommu_set_ops(&np->fwnode, ops);
+}
+
+static inline const struct iommu_ops *of_iommu_get_ops(struct device_node *np)
+{
+ return fwnode_iommu_get_ops(&np->fwnode);
+}
extern struct of_device_id __iommu_of_table;
--
2.10.0
^ permalink raw reply related
* [PATCH v7 05/16] drivers: iommu: arm-smmu: convert struct device of_node to fwnode usage
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
Current ARM SMMU driver rely on the struct device.of_node pointer for
device look-up and iommu_ops retrieval.
In preparation for ACPI probing enablement, convert the driver to use
the struct device.fwnode member for device and iommu_ops look-up so that
the driver infrastructure can be used also on systems that do not
associate an of_node pointer to a struct device (eg ACPI), making the
device look-up and iommu_ops retrieval firmware agnostic.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
---
drivers/iommu/arm-smmu.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 8f72814..8a3c2a4 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -1379,13 +1379,14 @@ static bool arm_smmu_capable(enum iommu_cap cap)
static int arm_smmu_match_node(struct device *dev, void *data)
{
- return dev->of_node == data;
+ return dev->fwnode == data;
}
-static struct arm_smmu_device *arm_smmu_get_by_node(struct device_node *np)
+static
+struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
{
struct device *dev = driver_find_device(&arm_smmu_driver.driver, NULL,
- np, arm_smmu_match_node);
+ fwnode, arm_smmu_match_node);
put_device(dev);
return dev ? dev_get_drvdata(dev) : NULL;
}
@@ -1403,7 +1404,7 @@ static int arm_smmu_add_device(struct device *dev)
if (ret)
goto out_free;
} else if (fwspec && fwspec->ops == &arm_smmu_ops) {
- smmu = arm_smmu_get_by_node(to_of_node(fwspec->iommu_fwnode));
+ smmu = arm_smmu_get_by_fwnode(fwspec->iommu_fwnode);
} else {
return -ENODEV;
}
@@ -2007,7 +2008,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
}
}
- of_iommu_set_ops(dev->of_node, &arm_smmu_ops);
+ fwnode_iommu_set_ops(dev->fwnode, &arm_smmu_ops);
platform_set_drvdata(pdev, smmu);
arm_smmu_device_reset(smmu);
--
2.10.0
^ permalink raw reply related
* [PATCH v7 06/16] drivers: iommu: arm-smmu-v3: convert struct device of_node to fwnode usage
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
Current ARM SMMU v3 driver rely on the struct device.of_node pointer for
device look-up and iommu_ops retrieval.
In preparation for ACPI probing enablement, convert the driver to use
the struct device.fwnode member for device and iommu_ops look-up so that
the driver infrastructure can be used also on systems that do not
associate an of_node pointer to a struct device (eg ACPI), making the
device look-up and iommu_ops retrieval firmware agnostic.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
---
drivers/iommu/arm-smmu-v3.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index e6f9b2d..fef9f60 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -1723,13 +1723,14 @@ static struct platform_driver arm_smmu_driver;
static int arm_smmu_match_node(struct device *dev, void *data)
{
- return dev->of_node == data;
+ return dev->fwnode == data;
}
-static struct arm_smmu_device *arm_smmu_get_by_node(struct device_node *np)
+static
+struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
{
struct device *dev = driver_find_device(&arm_smmu_driver.driver, NULL,
- np, arm_smmu_match_node);
+ fwnode, arm_smmu_match_node);
put_device(dev);
return dev ? dev_get_drvdata(dev) : NULL;
}
@@ -1765,7 +1766,7 @@ static int arm_smmu_add_device(struct device *dev)
master = fwspec->iommu_priv;
smmu = master->smmu;
} else {
- smmu = arm_smmu_get_by_node(to_of_node(fwspec->iommu_fwnode));
+ smmu = arm_smmu_get_by_fwnode(fwspec->iommu_fwnode);
if (!smmu)
return -ENODEV;
master = kzalloc(sizeof(*master), GFP_KERNEL);
@@ -2634,7 +2635,8 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
return ret;
/* And we're up. Go go go! */
- of_iommu_set_ops(dev->of_node, &arm_smmu_ops);
+ fwnode_iommu_set_ops(dev->fwnode, &arm_smmu_ops);
+
#ifdef CONFIG_PCI
if (pci_bus_type.iommu_ops != &arm_smmu_ops) {
pci_request_acs();
--
2.10.0
^ permalink raw reply related
* [PATCH v7 07/16] drivers: acpi: implement acpi_dma_configure
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
On DT based systems, the of_dma_configure() API implements DMA
configuration for a given device. On ACPI systems an API equivalent to
of_dma_configure() is missing which implies that it is currently not
possible to set-up DMA operations for devices through the ACPI generic
kernel layer.
This patch fills the gap by introducing acpi_dma_configure/deconfigure()
calls that for now are just wrappers around arch_setup_dma_ops() and
arch_teardown_dma_ops() and also updates ACPI and PCI core code to use
the newly introduced acpi_dma_configure/acpi_dma_deconfigure functions.
Since acpi_dma_configure() is used to configure DMA operations, the
function initializes the dma/coherent_dma masks to sane default values
if the current masks are uninitialized (also to keep the default values
consistent with DT systems) to make sure the device has a complete
default DMA set-up.
The DMA range size passed to arch_setup_dma_ops() is sized according
to the device coherent_dma_mask (starting at address 0x0), mirroring the
DT probing path behaviour when a dma-ranges property is not provided
for the device being probed; this changes the current arch_setup_dma_ops()
call parameters in the ACPI probing case, but since arch_setup_dma_ops()
is a NOP on all architectures but ARM/ARM64 this patch does not change
the current kernel behaviour on them.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [pci]
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
---
drivers/acpi/glue.c | 4 ++--
drivers/acpi/scan.c | 40 ++++++++++++++++++++++++++++++++++++++++
drivers/pci/probe.c | 3 +--
include/acpi/acpi_bus.h | 2 ++
include/linux/acpi.h | 5 +++++
5 files changed, 50 insertions(+), 4 deletions(-)
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 5ea5dc2..f8d6564 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -227,8 +227,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
attr = acpi_get_dma_attr(acpi_dev);
if (attr != DEV_DMA_NOT_SUPPORTED)
- arch_setup_dma_ops(dev, 0, 0, NULL,
- attr == DEV_DMA_COHERENT);
+ acpi_dma_configure(dev, attr);
acpi_physnode_link_name(physical_node_name, node_id);
retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
@@ -251,6 +250,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev)
return 0;
err:
+ acpi_dma_deconfigure(dev);
ACPI_COMPANION_SET(dev, NULL);
put_device(dev);
put_device(&acpi_dev->dev);
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 035ac64..694e0b6 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1370,6 +1370,46 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
return DEV_DMA_NON_COHERENT;
}
+/**
+ * acpi_dma_configure - Set-up DMA configuration for the device.
+ * @dev: The pointer to the device
+ * @attr: device dma attributes
+ */
+void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr)
+{
+ /*
+ * Set default coherent_dma_mask to 32 bit. Drivers are expected to
+ * setup the correct supported mask.
+ */
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+ /*
+ * Set it to coherent_dma_mask by default if the architecture
+ * code has not set it.
+ */
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+
+ /*
+ * Assume dma valid range starts at 0 and covers the whole
+ * coherent_dma_mask.
+ */
+ arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, NULL,
+ attr == DEV_DMA_COHERENT);
+}
+EXPORT_SYMBOL_GPL(acpi_dma_configure);
+
+/**
+ * acpi_dma_deconfigure - Tear-down DMA configuration for the device.
+ * @dev: The pointer to the device
+ */
+void acpi_dma_deconfigure(struct device *dev)
+{
+ arch_teardown_dma_ops(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_dma_deconfigure);
+
static void acpi_init_coherency(struct acpi_device *adev)
{
unsigned long long cca = 0;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ab00267..c29e07a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1738,8 +1738,7 @@ static void pci_dma_configure(struct pci_dev *dev)
if (attr == DEV_DMA_NOT_SUPPORTED)
dev_warn(&dev->dev, "DMA not supported.\n");
else
- arch_setup_dma_ops(&dev->dev, 0, 0, NULL,
- attr == DEV_DMA_COHERENT);
+ acpi_dma_configure(&dev->dev, attr);
}
pci_put_host_bridge_device(bridge);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index c1a524d..4242c31 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -573,6 +573,8 @@ struct acpi_pci_root {
bool acpi_dma_supported(struct acpi_device *adev);
enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
+void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr);
+void acpi_dma_deconfigure(struct device *dev);
struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
u64 address, bool check_children);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 6efb13c..df961f4 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -764,6 +764,11 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
return DEV_DMA_NOT_SUPPORTED;
}
+static inline void acpi_dma_configure(struct device *dev,
+ enum dev_dma_attr attr) { }
+
+static inline void acpi_dma_deconfigure(struct device *dev) { }
+
#define ACPI_PTR(_ptr) (NULL)
static inline void acpi_device_set_enumerated(struct acpi_device *adev)
--
2.10.0
^ permalink raw reply related
* [PATCH v7 08/16] drivers: acpi: iort: add node match function
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
Device drivers (eg ARM SMMU) need to know if a specific component
is part of the IORT table, so that kernel data structures are not
initialized at initcalls time if the respective component is not
part of the IORT table.
To this end, this patch adds a trivial function that allows detecting
if a given IORT node type is present or not in the ACPI table, providing
an ACPI IORT equivalent for of_find_matching_node().
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
---
drivers/acpi/arm64/iort.c | 15 +++++++++++++++
include/linux/acpi_iort.h | 2 ++
2 files changed, 17 insertions(+)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 1ac2720..4bb6acb 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -227,6 +227,21 @@ static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type,
return NULL;
}
+static acpi_status
+iort_match_type_callback(struct acpi_iort_node *node, void *context)
+{
+ return AE_OK;
+}
+
+bool iort_node_match(u8 type)
+{
+ struct acpi_iort_node *node;
+
+ node = iort_scan_node(type, iort_match_type_callback, NULL);
+
+ return node != NULL;
+}
+
static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
void *context)
{
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index d16fdda..17bb078 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -28,10 +28,12 @@ void iort_deregister_domain_token(int trans_id);
struct fwnode_handle *iort_find_domain_token(int trans_id);
#ifdef CONFIG_ACPI_IORT
void acpi_iort_init(void);
+bool iort_node_match(u8 type);
u32 iort_msi_map_rid(struct device *dev, u32 req_id);
struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id);
#else
static inline void acpi_iort_init(void) { }
+static inline bool iort_node_match(u8 type) { return false; }
static inline u32 iort_msi_map_rid(struct device *dev, u32 req_id)
{ return req_id; }
static inline struct irq_domain *iort_get_device_domain(struct device *dev,
--
2.10.0
^ permalink raw reply related
* [PATCH v7 09/16] drivers: acpi: iort: add support for ARM SMMU platform devices creation
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
In ARM ACPI systems, IOMMU components are specified through static
IORT table entries. In order to create platform devices for the
corresponding ARM SMMU components, IORT kernel code should be made
able to parse IORT table entries and create platform devices
dynamically.
This patch adds the generic IORT infrastructure required to create
platform devices for ARM SMMUs.
ARM SMMU versions have different resources requirement therefore this
patch also introduces an IORT specific structure (ie iort_iommu_config)
that contains hooks (to be defined when the corresponding ARM SMMU
driver support is added to the kernel) to be used to define the
platform devices names, init the IOMMUs, count their resources and
finally initialize them.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
---
drivers/acpi/arm64/iort.c | 151 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 151 insertions(+)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 4bb6acb..ddf83b5 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -19,9 +19,11 @@
#define pr_fmt(fmt) "ACPI: IORT: " fmt
#include <linux/acpi_iort.h>
+#include <linux/iommu.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/pci.h>
+#include <linux/platform_device.h>
#include <linux/slab.h>
struct iort_its_msi_chip {
@@ -457,6 +459,153 @@ struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id)
return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI);
}
+struct iort_iommu_config {
+ const char *name;
+ int (*iommu_init)(struct acpi_iort_node *node);
+ bool (*iommu_is_coherent)(struct acpi_iort_node *node);
+ int (*iommu_count_resources)(struct acpi_iort_node *node);
+ void (*iommu_init_resources)(struct resource *res,
+ struct acpi_iort_node *node);
+};
+
+static __init
+const struct iort_iommu_config *iort_get_iommu_cfg(struct acpi_iort_node *node)
+{
+ return NULL;
+}
+
+/**
+ * iort_add_smmu_platform_device() - Allocate a platform device for SMMU
+ * @node: Pointer to SMMU ACPI IORT node
+ *
+ * Returns: 0 on success, <0 failure
+ */
+static int __init iort_add_smmu_platform_device(struct acpi_iort_node *node)
+{
+ struct fwnode_handle *fwnode;
+ struct platform_device *pdev;
+ struct resource *r;
+ enum dev_dma_attr attr;
+ int ret, count;
+ const struct iort_iommu_config *ops = iort_get_iommu_cfg(node);
+
+ if (!ops)
+ return -ENODEV;
+
+ pdev = platform_device_alloc(ops->name, PLATFORM_DEVID_AUTO);
+ if (!pdev)
+ return PTR_ERR(pdev);
+
+ count = ops->iommu_count_resources(node);
+
+ r = kcalloc(count, sizeof(*r), GFP_KERNEL);
+ if (!r) {
+ ret = -ENOMEM;
+ goto dev_put;
+ }
+
+ ops->iommu_init_resources(r, node);
+
+ ret = platform_device_add_resources(pdev, r, count);
+ /*
+ * Resources are duplicated in platform_device_add_resources,
+ * free their allocated memory
+ */
+ kfree(r);
+
+ if (ret)
+ goto dev_put;
+
+ /*
+ * Add a copy of IORT node pointer to platform_data to
+ * be used to retrieve IORT data information.
+ */
+ ret = platform_device_add_data(pdev, &node, sizeof(node));
+ if (ret)
+ goto dev_put;
+
+ /*
+ * We expect the dma masks to be equivalent for
+ * all SMMUs set-ups
+ */
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+
+ fwnode = iort_get_fwnode(node);
+
+ if (!fwnode) {
+ ret = -ENODEV;
+ goto dev_put;
+ }
+
+ pdev->dev.fwnode = fwnode;
+
+ attr = ops->iommu_is_coherent(node) ?
+ DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
+
+ /* Configure DMA for the page table walker */
+ acpi_dma_configure(&pdev->dev, attr);
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto dma_deconfigure;
+
+ return 0;
+
+dma_deconfigure:
+ acpi_dma_deconfigure(&pdev->dev);
+dev_put:
+ platform_device_put(pdev);
+
+ return ret;
+}
+
+static void __init iort_init_platform_devices(void)
+{
+ struct acpi_iort_node *iort_node, *iort_end;
+ struct acpi_table_iort *iort;
+ struct fwnode_handle *fwnode;
+ int i, ret;
+
+ /*
+ * iort_table and iort both point to the start of IORT table, but
+ * have different struct types
+ */
+ iort = (struct acpi_table_iort *)iort_table;
+
+ /* Get the first IORT node */
+ iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
+ iort->node_offset);
+ iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort,
+ iort_table->length);
+
+ for (i = 0; i < iort->node_count; i++) {
+ if (iort_node >= iort_end) {
+ pr_err("iort node pointer overflows, bad table\n");
+ return;
+ }
+
+ if ((iort_node->type == ACPI_IORT_NODE_SMMU) ||
+ (iort_node->type == ACPI_IORT_NODE_SMMU_V3)) {
+
+ fwnode = acpi_alloc_fwnode_static();
+ if (!fwnode)
+ return;
+
+ iort_set_fwnode(iort_node, fwnode);
+
+ ret = iort_add_smmu_platform_device(iort_node);
+ if (ret) {
+ iort_delete_fwnode(iort_node);
+ acpi_free_fwnode_static(fwnode);
+ return;
+ }
+ }
+
+ iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
+ iort_node->length);
+ }
+}
+
void __init acpi_iort_init(void)
{
acpi_status status;
@@ -472,5 +621,7 @@ void __init acpi_iort_init(void)
return;
}
+ iort_init_platform_devices();
+
acpi_probe_device_table(iort);
}
--
2.10.0
^ permalink raw reply related
* [PATCH v7 10/16] drivers: iommu: arm-smmu-v3: split probe functions into DT/generic portions
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
Current ARM SMMUv3 probe functions intermingle HW and DT probing in the
initialization functions to detect and programme the ARM SMMU v3 driver
features. In order to allow probing the ARM SMMUv3 with other firmwares
than DT, this patch splits the ARM SMMUv3 init functions into DT and HW
specific portions so that other FW interfaces (ie ACPI) can reuse the HW
probing functions and skip the DT portion accordingly.
This patch implements no functional change, only code reshuffling.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
---
drivers/iommu/arm-smmu-v3.c | 46 +++++++++++++++++++++++++++++----------------
1 file changed, 30 insertions(+), 16 deletions(-)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index fef9f60..f970acd 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -2381,10 +2381,10 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
return 0;
}
-static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
+static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
{
u32 reg;
- bool coherent;
+ bool coherent = smmu->features & ARM_SMMU_FEAT_COHERENCY;
/* IDR0 */
reg = readl_relaxed(smmu->base + ARM_SMMU_IDR0);
@@ -2436,13 +2436,9 @@ static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
smmu->features |= ARM_SMMU_FEAT_HYP;
/*
- * The dma-coherent property is used in preference to the ID
+ * The coherency feature as set by FW is used in preference to the ID
* register, but warn on mismatch.
*/
- coherent = of_dma_is_coherent(smmu->dev->of_node);
- if (coherent)
- smmu->features |= ARM_SMMU_FEAT_COHERENCY;
-
if (!!(reg & IDR0_COHACC) != coherent)
dev_warn(smmu->dev, "IDR0.COHACC overridden by dma-coherent property (%s)\n",
coherent ? "true" : "false");
@@ -2563,21 +2559,37 @@ static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
return 0;
}
-static int arm_smmu_device_dt_probe(struct platform_device *pdev)
+static int arm_smmu_device_dt_probe(struct platform_device *pdev,
+ struct arm_smmu_device *smmu,
+ bool *bypass)
{
- int irq, ret;
- struct resource *res;
- struct arm_smmu_device *smmu;
struct device *dev = &pdev->dev;
- bool bypass = true;
u32 cells;
+ *bypass = true;
+
if (of_property_read_u32(dev->of_node, "#iommu-cells", &cells))
dev_err(dev, "missing #iommu-cells property\n");
else if (cells != 1)
dev_err(dev, "invalid #iommu-cells value (%d)\n", cells);
else
- bypass = false;
+ *bypass = false;
+
+ parse_driver_options(smmu);
+
+ if (of_dma_is_coherent(smmu->dev->of_node))
+ smmu->features |= ARM_SMMU_FEAT_COHERENCY;
+
+ return 0;
+}
+
+static int arm_smmu_device_probe(struct platform_device *pdev)
+{
+ int irq, ret;
+ struct resource *res;
+ struct arm_smmu_device *smmu;
+ struct device *dev = &pdev->dev;
+ bool bypass;
smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
if (!smmu) {
@@ -2614,10 +2626,12 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
if (irq > 0)
smmu->gerr_irq = irq;
- parse_driver_options(smmu);
+ ret = arm_smmu_device_dt_probe(pdev, smmu, &bypass);
+ if (ret)
+ return ret;
/* Probe the h/w */
- ret = arm_smmu_device_probe(smmu);
+ ret = arm_smmu_device_hw_probe(smmu);
if (ret)
return ret;
@@ -2679,7 +2693,7 @@ static struct platform_driver arm_smmu_driver = {
.name = "arm-smmu-v3",
.of_match_table = of_match_ptr(arm_smmu_of_match),
},
- .probe = arm_smmu_device_dt_probe,
+ .probe = arm_smmu_device_probe,
.remove = arm_smmu_device_remove,
};
--
2.10.0
^ permalink raw reply related
* [PATCH v7 11/16] drivers: iommu: arm-smmu-v3: add IORT configuration
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
In ACPI bases systems, in order to be able to create platform
devices and initialize them for ARM SMMU v3 components, the IORT
kernel implementation requires a set of static functions to be
used by the IORT kernel layer to configure platform devices for
ARM SMMU v3 components.
Add static configuration functions to the IORT kernel layer for
the ARM SMMU v3 components, so that the ARM SMMU v3 driver can
initialize its respective platform device by relying on the IORT
kernel infrastructure and by adding a corresponding ACPI device
early probe section entry.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
---
drivers/acpi/arm64/iort.c | 103 +++++++++++++++++++++++++++++++++++++++++++-
drivers/iommu/arm-smmu-v3.c | 49 ++++++++++++++++++++-
2 files changed, 150 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index ddf83b5..fd52e4c 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -459,6 +459,95 @@ struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id)
return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI);
}
+static void __init acpi_iort_register_irq(int hwirq, const char *name,
+ int trigger,
+ struct resource *res)
+{
+ int irq = acpi_register_gsi(NULL, hwirq, trigger,
+ ACPI_ACTIVE_HIGH);
+
+ if (irq <= 0) {
+ pr_err("could not register gsi hwirq %d name [%s]\n", hwirq,
+ name);
+ return;
+ }
+
+ res->start = irq;
+ res->end = irq;
+ res->flags = IORESOURCE_IRQ;
+ res->name = name;
+}
+
+static int __init arm_smmu_v3_count_resources(struct acpi_iort_node *node)
+{
+ struct acpi_iort_smmu_v3 *smmu;
+ /* Always present mem resource */
+ int num_res = 1;
+
+ /* Retrieve SMMUv3 specific data */
+ smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+ if (smmu->event_gsiv)
+ num_res++;
+
+ if (smmu->pri_gsiv)
+ num_res++;
+
+ if (smmu->gerr_gsiv)
+ num_res++;
+
+ if (smmu->sync_gsiv)
+ num_res++;
+
+ return num_res;
+}
+
+static void __init arm_smmu_v3_init_resources(struct resource *res,
+ struct acpi_iort_node *node)
+{
+ struct acpi_iort_smmu_v3 *smmu;
+ int num_res = 0;
+
+ /* Retrieve SMMUv3 specific data */
+ smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+ res[num_res].start = smmu->base_address;
+ res[num_res].end = smmu->base_address + SZ_128K - 1;
+ res[num_res].flags = IORESOURCE_MEM;
+
+ num_res++;
+
+ if (smmu->event_gsiv)
+ acpi_iort_register_irq(smmu->event_gsiv, "eventq",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+
+ if (smmu->pri_gsiv)
+ acpi_iort_register_irq(smmu->pri_gsiv, "priq",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+
+ if (smmu->gerr_gsiv)
+ acpi_iort_register_irq(smmu->gerr_gsiv, "gerror",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+
+ if (smmu->sync_gsiv)
+ acpi_iort_register_irq(smmu->sync_gsiv, "cmdq-sync",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+}
+
+static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
+{
+ struct acpi_iort_smmu_v3 *smmu;
+
+ /* Retrieve SMMUv3 specific data */
+ smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+ return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
+}
+
struct iort_iommu_config {
const char *name;
int (*iommu_init)(struct acpi_iort_node *node);
@@ -468,10 +557,22 @@ struct iort_iommu_config {
struct acpi_iort_node *node);
};
+static const struct iort_iommu_config iort_arm_smmu_v3_cfg __initconst = {
+ .name = "arm-smmu-v3",
+ .iommu_is_coherent = arm_smmu_v3_is_coherent,
+ .iommu_count_resources = arm_smmu_v3_count_resources,
+ .iommu_init_resources = arm_smmu_v3_init_resources
+};
+
static __init
const struct iort_iommu_config *iort_get_iommu_cfg(struct acpi_iort_node *node)
{
- return NULL;
+ switch (node->type) {
+ case ACPI_IORT_NODE_SMMU_V3:
+ return &iort_arm_smmu_v3_cfg;
+ default:
+ return NULL;
+ }
}
/**
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index f970acd..f2401a05 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -20,6 +20,8 @@
* This driver is powered by bad coffee and bombay mix.
*/
+#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
#include <linux/delay.h>
#include <linux/dma-iommu.h>
#include <linux/err.h>
@@ -2559,6 +2561,36 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
return 0;
}
+#ifdef CONFIG_ACPI
+static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+ struct arm_smmu_device *smmu,
+ bool *bypass)
+{
+ struct acpi_iort_smmu_v3 *iort_smmu;
+ struct device *dev = smmu->dev;
+ struct acpi_iort_node *node;
+
+ node = *(struct acpi_iort_node **)dev_get_platdata(dev);
+
+ /* Retrieve SMMUv3 specific data */
+ iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+ if (iort_smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE)
+ smmu->features |= ARM_SMMU_FEAT_COHERENCY;
+
+ *bypass = false;
+
+ return 0;
+}
+#else
+static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+ struct arm_smmu_device *smmu,
+ bool *bypass)
+{
+ return -ENODEV;
+}
+#endif
+
static int arm_smmu_device_dt_probe(struct platform_device *pdev,
struct arm_smmu_device *smmu,
bool *bypass)
@@ -2626,7 +2658,11 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
if (irq > 0)
smmu->gerr_irq = irq;
- ret = arm_smmu_device_dt_probe(pdev, smmu, &bypass);
+ if (dev->of_node)
+ ret = arm_smmu_device_dt_probe(pdev, smmu, &bypass);
+ else
+ ret = arm_smmu_device_acpi_probe(pdev, smmu, &bypass);
+
if (ret)
return ret;
@@ -2731,6 +2767,17 @@ static int __init arm_smmu_of_init(struct device_node *np)
}
IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", arm_smmu_of_init);
+#ifdef CONFIG_ACPI
+static int __init acpi_smmu_v3_init(struct acpi_table_header *table)
+{
+ if (iort_node_match(ACPI_IORT_NODE_SMMU_V3))
+ return arm_smmu_init();
+
+ return 0;
+}
+IORT_ACPI_DECLARE(arm_smmu_v3, ACPI_SIG_IORT, acpi_smmu_v3_init);
+#endif
+
MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
MODULE_LICENSE("GPL v2");
--
2.10.0
^ permalink raw reply related
* [PATCH v7 12/16] drivers: iommu: arm-smmu: split probe functions into DT/generic portions
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
Current ARM SMMU probe functions intermingle HW and DT probing
in the initialization functions to detect and programme the ARM SMMU
driver features. In order to allow probing the ARM SMMU with other
firmwares than DT, this patch splits the ARM SMMU init functions into
DT and HW specific portions so that other FW interfaces (ie ACPI) can
reuse the HW probing functions and skip the DT portion accordingly.
This patch implements no functional change, only code reshuffling.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Robin Murphy <robin.murphy@arm.com>
---
drivers/iommu/arm-smmu.c | 62 +++++++++++++++++++++++++++++-------------------
1 file changed, 37 insertions(+), 25 deletions(-)
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 8a3c2a4..e1b6951 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -1668,7 +1668,7 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
unsigned long size;
void __iomem *gr0_base = ARM_SMMU_GR0(smmu);
u32 id;
- bool cttw_dt, cttw_reg;
+ bool cttw_reg, cttw_fw = smmu->features & ARM_SMMU_FEAT_COHERENT_WALK;
int i;
dev_notice(smmu->dev, "probing hardware configuration...\n");
@@ -1713,20 +1713,17 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
/*
* In order for DMA API calls to work properly, we must defer to what
- * the DT says about coherency, regardless of what the hardware claims.
+ * the FW says about coherency, regardless of what the hardware claims.
* Fortunately, this also opens up a workaround for systems where the
* ID register value has ended up configured incorrectly.
*/
- cttw_dt = of_dma_is_coherent(smmu->dev->of_node);
cttw_reg = !!(id & ID0_CTTW);
- if (cttw_dt)
- smmu->features |= ARM_SMMU_FEAT_COHERENT_WALK;
- if (cttw_dt || cttw_reg)
+ if (cttw_fw || cttw_reg)
dev_notice(smmu->dev, "\t%scoherent table walk\n",
- cttw_dt ? "" : "non-");
- if (cttw_dt != cttw_reg)
+ cttw_fw ? "" : "non-");
+ if (cttw_fw != cttw_reg)
dev_notice(smmu->dev,
- "\t(IDR0.CTTW overridden by dma-coherent property)\n");
+ "\t(IDR0.CTTW overridden by FW configuration)\n");
/* Max. number of entries we have for stream matching/indexing */
size = 1 << ((id >> ID0_NUMSIDB_SHIFT) & ID0_NUMSIDB_MASK);
@@ -1907,15 +1904,25 @@ static const struct of_device_id arm_smmu_of_match[] = {
};
MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
-static int arm_smmu_device_dt_probe(struct platform_device *pdev)
+static int arm_smmu_device_dt_probe(struct platform_device *pdev,
+ struct arm_smmu_device *smmu)
{
const struct arm_smmu_match_data *data;
- struct resource *res;
- struct arm_smmu_device *smmu;
struct device *dev = &pdev->dev;
- int num_irqs, i, err;
bool legacy_binding;
+ if (of_property_read_u32(dev->of_node, "#global-interrupts",
+ &smmu->num_global_irqs)) {
+ dev_err(dev, "missing #global-interrupts property\n");
+ return -ENODEV;
+ }
+
+ data = of_device_get_match_data(dev);
+ smmu->version = data->version;
+ smmu->model = data->model;
+
+ parse_driver_options(smmu);
+
legacy_binding = of_find_property(dev->of_node, "mmu-masters", NULL);
if (legacy_binding && !using_generic_binding) {
if (!using_legacy_binding)
@@ -1928,6 +1935,19 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
return -ENODEV;
}
+ if (of_dma_is_coherent(smmu->dev->of_node))
+ smmu->features |= ARM_SMMU_FEAT_COHERENT_WALK;
+
+ return 0;
+}
+
+static int arm_smmu_device_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct arm_smmu_device *smmu;
+ struct device *dev = &pdev->dev;
+ int num_irqs, i, err;
+
smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
if (!smmu) {
dev_err(dev, "failed to allocate arm_smmu_device\n");
@@ -1935,9 +1955,9 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
}
smmu->dev = dev;
- data = of_device_get_match_data(dev);
- smmu->version = data->version;
- smmu->model = data->model;
+ err = arm_smmu_device_dt_probe(pdev, smmu);
+ if (err)
+ return err;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
smmu->base = devm_ioremap_resource(dev, res);
@@ -1945,12 +1965,6 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
return PTR_ERR(smmu->base);
smmu->size = resource_size(res);
- if (of_property_read_u32(dev->of_node, "#global-interrupts",
- &smmu->num_global_irqs)) {
- dev_err(dev, "missing #global-interrupts property\n");
- return -ENODEV;
- }
-
num_irqs = 0;
while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, num_irqs))) {
num_irqs++;
@@ -1985,8 +1999,6 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
if (err)
return err;
- parse_driver_options(smmu);
-
if (smmu->version == ARM_SMMU_V2 &&
smmu->num_context_banks != smmu->num_context_irqs) {
dev_err(dev,
@@ -2048,7 +2060,7 @@ static struct platform_driver arm_smmu_driver = {
.name = "arm-smmu",
.of_match_table = of_match_ptr(arm_smmu_of_match),
},
- .probe = arm_smmu_device_dt_probe,
+ .probe = arm_smmu_device_probe,
.remove = arm_smmu_device_remove,
};
--
2.10.0
^ permalink raw reply related
* [PATCH v7 13/16] drivers: iommu: arm-smmu: add IORT configuration
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
In ACPI bases systems, in order to be able to create platform
devices and initialize them for ARM SMMU components, the IORT
kernel implementation requires a set of static functions to be
used by the IORT kernel layer to configure platform devices for
ARM SMMU components.
Add static configuration functions to the IORT kernel layer for
the ARM SMMU components, so that the ARM SMMU driver can
initialize its respective platform device by relying on the IORT
kernel infrastructure and by adding a corresponding ACPI device
early probe section entry.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
---
drivers/acpi/arm64/iort.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
drivers/iommu/arm-smmu.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++-
include/linux/acpi_iort.h | 3 ++
3 files changed, 166 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index fd52e4c..4708806 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -548,6 +548,78 @@ static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
}
+static int __init arm_smmu_count_resources(struct acpi_iort_node *node)
+{
+ struct acpi_iort_smmu *smmu;
+ int num_irqs;
+ u64 *glb_irq;
+
+ /* Retrieve SMMU specific data */
+ smmu = (struct acpi_iort_smmu *)node->node_data;
+
+ glb_irq = ACPI_ADD_PTR(u64, node, smmu->global_interrupt_offset);
+ if (!IORT_IRQ_MASK(glb_irq[1])) /* 0 means not implemented */
+ num_irqs = 1;
+ else
+ num_irqs = 2;
+
+ num_irqs += smmu->context_interrupt_count;
+
+ return num_irqs + 1;
+}
+
+static void __init arm_smmu_init_resources(struct resource *res,
+ struct acpi_iort_node *node)
+{
+ struct acpi_iort_smmu *smmu;
+ int i, hw_irq, trigger, num_res = 0;
+ u64 *ctx_irq, *glb_irq;
+
+ /* Retrieve SMMU specific data */
+ smmu = (struct acpi_iort_smmu *)node->node_data;
+
+ res[num_res].start = smmu->base_address;
+ res[num_res].end = smmu->base_address + smmu->span - 1;
+ res[num_res].flags = IORESOURCE_MEM;
+ num_res++;
+
+ glb_irq = ACPI_ADD_PTR(u64, node, smmu->global_interrupt_offset);
+ /* Global IRQs */
+ hw_irq = IORT_IRQ_MASK(glb_irq[0]);
+ trigger = IORT_IRQ_TRIGGER_MASK(glb_irq[0]);
+
+ acpi_iort_register_irq(hw_irq, "arm-smmu-global", trigger,
+ &res[num_res++]);
+
+ /* Global IRQs */
+ hw_irq = IORT_IRQ_MASK(glb_irq[1]);
+ if (hw_irq) {
+ trigger = IORT_IRQ_TRIGGER_MASK(glb_irq[1]);
+ acpi_iort_register_irq(hw_irq, "arm-smmu-global", trigger,
+ &res[num_res++]);
+ }
+
+ /* Context IRQs */
+ ctx_irq = ACPI_ADD_PTR(u64, node, smmu->context_interrupt_offset);
+ for (i = 0; i < smmu->context_interrupt_count; i++) {
+ hw_irq = IORT_IRQ_MASK(ctx_irq[i]);
+ trigger = IORT_IRQ_TRIGGER_MASK(ctx_irq[i]);
+
+ acpi_iort_register_irq(hw_irq, "arm-smmu-context", trigger,
+ &res[num_res++]);
+ }
+}
+
+static bool __init arm_smmu_is_coherent(struct acpi_iort_node *node)
+{
+ struct acpi_iort_smmu *smmu;
+
+ /* Retrieve SMMU specific data */
+ smmu = (struct acpi_iort_smmu *)node->node_data;
+
+ return smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK;
+}
+
struct iort_iommu_config {
const char *name;
int (*iommu_init)(struct acpi_iort_node *node);
@@ -564,12 +636,21 @@ static const struct iort_iommu_config iort_arm_smmu_v3_cfg __initconst = {
.iommu_init_resources = arm_smmu_v3_init_resources
};
+static const struct iort_iommu_config iort_arm_smmu_cfg __initconst = {
+ .name = "arm-smmu",
+ .iommu_is_coherent = arm_smmu_is_coherent,
+ .iommu_count_resources = arm_smmu_count_resources,
+ .iommu_init_resources = arm_smmu_init_resources
+};
+
static __init
const struct iort_iommu_config *iort_get_iommu_cfg(struct acpi_iort_node *node)
{
switch (node->type) {
case ACPI_IORT_NODE_SMMU_V3:
return &iort_arm_smmu_v3_cfg;
+ case ACPI_IORT_NODE_SMMU:
+ return &iort_arm_smmu_cfg;
default:
return NULL;
}
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index e1b6951..2e86cbf 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -28,6 +28,8 @@
#define pr_fmt(fmt) "arm-smmu: " fmt
+#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
#include <linux/atomic.h>
#include <linux/delay.h>
#include <linux/dma-iommu.h>
@@ -1904,6 +1906,70 @@ static const struct of_device_id arm_smmu_of_match[] = {
};
MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
+#ifdef CONFIG_ACPI
+static int acpi_smmu_get_data(u32 model, u32 *version, u32 *impl)
+{
+ int ret = 0;
+
+ switch (model) {
+ case ACPI_IORT_SMMU_V1:
+ case ACPI_IORT_SMMU_CORELINK_MMU400:
+ *version = ARM_SMMU_V1;
+ *impl = GENERIC_SMMU;
+ break;
+ case ACPI_IORT_SMMU_V2:
+ *version = ARM_SMMU_V2;
+ *impl = GENERIC_SMMU;
+ break;
+ case ACPI_IORT_SMMU_CORELINK_MMU500:
+ *version = ARM_SMMU_V2;
+ *impl = ARM_MMU500;
+ break;
+ default:
+ ret = -ENODEV;
+ }
+
+ return ret;
+}
+
+static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+ struct arm_smmu_device *smmu)
+{
+ struct device *dev = smmu->dev;
+ struct acpi_iort_node *node =
+ *(struct acpi_iort_node **)dev_get_platdata(dev);
+ struct acpi_iort_smmu *iort_smmu;
+ u64 *glb_irq;
+ int ret;
+
+ /* Retrieve SMMU1/2 specific data */
+ iort_smmu = (struct acpi_iort_smmu *)node->node_data;
+
+ ret = acpi_smmu_get_data(iort_smmu->model, &smmu->version,
+ &smmu->model);
+ if (ret < 0)
+ return ret;
+
+ glb_irq = ACPI_ADD_PTR(u64, node, iort_smmu->global_interrupt_offset);
+
+ if (!IORT_IRQ_MASK(glb_irq[1])) /* 0 means not implemented */
+ smmu->num_global_irqs = 1;
+ else
+ smmu->num_global_irqs = 2;
+
+ if (iort_smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK)
+ smmu->features |= ARM_SMMU_FEAT_COHERENT_WALK;
+
+ return 0;
+}
+#else
+static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+ struct arm_smmu_device *smmu)
+{
+ return -ENODEV;
+}
+#endif
+
static int arm_smmu_device_dt_probe(struct platform_device *pdev,
struct arm_smmu_device *smmu)
{
@@ -1955,7 +2021,11 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
}
smmu->dev = dev;
- err = arm_smmu_device_dt_probe(pdev, smmu);
+ if (dev->of_node)
+ err = arm_smmu_device_dt_probe(pdev, smmu);
+ else
+ err = arm_smmu_device_acpi_probe(pdev, smmu);
+
if (err)
return err;
@@ -2103,6 +2173,17 @@ IOMMU_OF_DECLARE(arm_mmu401, "arm,mmu-401", arm_smmu_of_init);
IOMMU_OF_DECLARE(arm_mmu500, "arm,mmu-500", arm_smmu_of_init);
IOMMU_OF_DECLARE(cavium_smmuv2, "cavium,smmu-v2", arm_smmu_of_init);
+#ifdef CONFIG_ACPI
+static int __init arm_smmu_acpi_init(struct acpi_table_header *table)
+{
+ if (iort_node_match(ACPI_IORT_NODE_SMMU))
+ return arm_smmu_init();
+
+ return 0;
+}
+IORT_ACPI_DECLARE(arm_smmu, ACPI_SIG_IORT, arm_smmu_acpi_init);
+#endif
+
MODULE_DESCRIPTION("IOMMU API for ARM architected SMMU implementations");
MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
MODULE_LICENSE("GPL v2");
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index 17bb078..79ba1bb 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -23,6 +23,9 @@
#include <linux/fwnode.h>
#include <linux/irqdomain.h>
+#define IORT_IRQ_MASK(irq) (irq & 0xffffffffULL)
+#define IORT_IRQ_TRIGGER_MASK(irq) ((irq >> 32) & 0xffffffffULL)
+
int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node);
void iort_deregister_domain_token(int trans_id);
struct fwnode_handle *iort_find_domain_token(int trans_id);
--
2.10.0
^ permalink raw reply related
* [PATCH v7 14/16] drivers: acpi: iort: replace rid map type with type mask
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
IORT tables provide data that allow the kernel to carry out
device ID mappings between endpoints and system components
(eg interrupt controllers, IOMMUs). When the mapping for a
given device ID is carried out, the translation mechanism
is done on a per-subsystem basis rather than a component
subtype (ie the IOMMU kernel layer will look for mappings
from a device to all IORT node types corresponding to IOMMU
components), therefore the corresponding mapping API should
work on a range (ie mask) of IORT node types corresponding
to a common set of components (eg IOMMUs) rather than a
specific node type.
Upgrade the IORT iort_node_map_rid() API to work with a
type mask instead of a single node type so that it can
be used for mappings that span multiple components types
(ie IOMMUs).
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
---
drivers/acpi/arm64/iort.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 4708806..62057c6 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -26,6 +26,9 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
+#define IORT_TYPE_MASK(type) (1 << (type))
+#define IORT_MSI_TYPE (1 << ACPI_IORT_NODE_ITS_GROUP)
+
struct iort_its_msi_chip {
struct list_head list;
struct fwnode_handle *fw_node;
@@ -317,7 +320,7 @@ static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node,
u32 rid_in, u32 *rid_out,
- u8 type)
+ u8 type_mask)
{
u32 rid = rid_in;
@@ -326,7 +329,7 @@ static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node,
struct acpi_iort_id_mapping *map;
int i;
- if (node->type == type) {
+ if (IORT_TYPE_MASK(node->type) & type_mask) {
if (rid_out)
*rid_out = rid;
return node;
@@ -399,7 +402,7 @@ u32 iort_msi_map_rid(struct device *dev, u32 req_id)
if (!node)
return req_id;
- iort_node_map_rid(node, req_id, &dev_id, ACPI_IORT_NODE_ITS_GROUP);
+ iort_node_map_rid(node, req_id, &dev_id, IORT_MSI_TYPE);
return dev_id;
}
@@ -421,7 +424,7 @@ static int iort_dev_find_its_id(struct device *dev, u32 req_id,
if (!node)
return -ENXIO;
- node = iort_node_map_rid(node, req_id, NULL, ACPI_IORT_NODE_ITS_GROUP);
+ node = iort_node_map_rid(node, req_id, NULL, IORT_MSI_TYPE);
if (!node)
return -ENXIO;
--
2.10.0
^ permalink raw reply related
* [PATCH v7 15/16] drivers: acpi: iort: add single mapping function
From: Lorenzo Pieralisi @ 2016-11-09 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
The current IORT id mapping API requires components to provide
an input requester ID (a Bus-Device-Function (BDF) identifier for
PCI devices) to translate an input identifier to an output
identifier through an IORT range mapping.
Named components do not have an identifiable source ID therefore
their respective input/output mapping can only be defined in
IORT tables through single mappings, that provide a translation
that does not require any input identifier.
Current IORT interface for requester id mappings (iort_node_map_rid())
is not suitable for components that do not provide a requester id,
so it cannot be used for IORT named components.
Add an interface to the IORT API to enable retrieval of id
by allowing an indexed walk of the single mappings array for
a given component, therefore completing the IORT mapping API.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Tomasz Nowicki <tn@semihalf.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
---
drivers/acpi/arm64/iort.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 62057c6..7d30605 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -318,6 +318,45 @@ static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
return 0;
}
+static
+struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
+ u32 *id_out, u8 type_mask,
+ int index)
+{
+ struct acpi_iort_node *parent;
+ struct acpi_iort_id_mapping *map;
+
+ if (!node->mapping_offset || !node->mapping_count ||
+ index >= node->mapping_count)
+ return NULL;
+
+ map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
+ node->mapping_offset);
+
+ /* Firmware bug! */
+ if (!map->output_reference) {
+ pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
+ node, node->type);
+ return NULL;
+ }
+
+ parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
+ map->output_reference);
+
+ if (!(IORT_TYPE_MASK(parent->type) & type_mask))
+ return NULL;
+
+ if (map[index].flags & ACPI_IORT_ID_SINGLE_MAPPING) {
+ if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT ||
+ node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
+ *id_out = map[index].output_base;
+ return parent;
+ }
+ }
+
+ return NULL;
+}
+
static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node *node,
u32 rid_in, u32 *rid_out,
u8 type_mask)
--
2.10.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox