* [PATCH v2 1/7] arm: put types.h in uapi
From: Nicolas Dichtel @ 2017-01-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483695839-18660-1-git-send-email-nicolas.dichtel@6wind.com>
This header file is exported, thus move it to uapi.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---
arch/arm/include/asm/types.h | 36 +----------------------------------
arch/arm/include/uapi/asm/types.h | 40 +++++++++++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+), 35 deletions(-)
create mode 100644 arch/arm/include/uapi/asm/types.h
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
index a53cdb8f068c..c48fee3d7b3b 100644
--- a/arch/arm/include/asm/types.h
+++ b/arch/arm/include/asm/types.h
@@ -1,40 +1,6 @@
#ifndef _ASM_TYPES_H
#define _ASM_TYPES_H
-#include <asm-generic/int-ll64.h>
-
-/*
- * The C99 types uintXX_t that are usually defined in 'stdint.h' are not as
- * unambiguous on ARM as you would expect. For the types below, there is a
- * difference on ARM between GCC built for bare metal ARM, GCC built for glibc
- * and the kernel itself, which results in build errors if you try to build with
- * -ffreestanding and include 'stdint.h' (such as when you include 'arm_neon.h'
- * in order to use NEON intrinsics)
- *
- * As the typedefs for these types in 'stdint.h' are based on builtin defines
- * supplied by GCC, we can tweak these to align with the kernel's idea of those
- * types, so 'linux/types.h' and 'stdint.h' can be safely included from the same
- * source file (provided that -ffreestanding is used).
- *
- * int32_t uint32_t uintptr_t
- * bare metal GCC long unsigned long unsigned int
- * glibc GCC int unsigned int unsigned int
- * kernel int unsigned int unsigned long
- */
-
-#ifdef __INT32_TYPE__
-#undef __INT32_TYPE__
-#define __INT32_TYPE__ int
-#endif
-
-#ifdef __UINT32_TYPE__
-#undef __UINT32_TYPE__
-#define __UINT32_TYPE__ unsigned int
-#endif
-
-#ifdef __UINTPTR_TYPE__
-#undef __UINTPTR_TYPE__
-#define __UINTPTR_TYPE__ unsigned long
-#endif
+#include <uapi/asm/types.h>
#endif /* _ASM_TYPES_H */
diff --git a/arch/arm/include/uapi/asm/types.h b/arch/arm/include/uapi/asm/types.h
new file mode 100644
index 000000000000..9435a42f575e
--- /dev/null
+++ b/arch/arm/include/uapi/asm/types.h
@@ -0,0 +1,40 @@
+#ifndef _UAPI_ASM_TYPES_H
+#define _UAPI_ASM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+/*
+ * The C99 types uintXX_t that are usually defined in 'stdint.h' are not as
+ * unambiguous on ARM as you would expect. For the types below, there is a
+ * difference on ARM between GCC built for bare metal ARM, GCC built for glibc
+ * and the kernel itself, which results in build errors if you try to build with
+ * -ffreestanding and include 'stdint.h' (such as when you include 'arm_neon.h'
+ * in order to use NEON intrinsics)
+ *
+ * As the typedefs for these types in 'stdint.h' are based on builtin defines
+ * supplied by GCC, we can tweak these to align with the kernel's idea of those
+ * types, so 'linux/types.h' and 'stdint.h' can be safely included from the same
+ * source file (provided that -ffreestanding is used).
+ *
+ * int32_t uint32_t uintptr_t
+ * bare metal GCC long unsigned long unsigned int
+ * glibc GCC int unsigned int unsigned int
+ * kernel int unsigned int unsigned long
+ */
+
+#ifdef __INT32_TYPE__
+#undef __INT32_TYPE__
+#define __INT32_TYPE__ int
+#endif
+
+#ifdef __UINT32_TYPE__
+#undef __UINT32_TYPE__
+#define __UINT32_TYPE__ unsigned int
+#endif
+
+#ifdef __UINTPTR_TYPE__
+#undef __UINTPTR_TYPE__
+#define __UINTPTR_TYPE__ unsigned long
+#endif
+
+#endif /* _UAPI_ASM_TYPES_H */
--
2.8.1
^ permalink raw reply related
* [PATCH v2 2/7] h8300: put bitsperlong.h in uapi
From: Nicolas Dichtel @ 2017-01-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483695839-18660-1-git-send-email-nicolas.dichtel@6wind.com>
This header file is exported, thus move it to uapi.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---
arch/h8300/include/asm/bitsperlong.h | 10 +---------
arch/h8300/include/uapi/asm/bitsperlong.h | 14 ++++++++++++++
2 files changed, 15 insertions(+), 9 deletions(-)
create mode 100644 arch/h8300/include/uapi/asm/bitsperlong.h
diff --git a/arch/h8300/include/asm/bitsperlong.h b/arch/h8300/include/asm/bitsperlong.h
index e140e46729ac..c0a8e2ee531e 100644
--- a/arch/h8300/include/asm/bitsperlong.h
+++ b/arch/h8300/include/asm/bitsperlong.h
@@ -1,14 +1,6 @@
#ifndef __ASM_H8300_BITS_PER_LONG
#define __ASM_H8300_BITS_PER_LONG
-#include <asm-generic/bitsperlong.h>
-
-#if !defined(__ASSEMBLY__)
-/* h8300-unknown-linux required long */
-#define __kernel_size_t __kernel_size_t
-typedef unsigned long __kernel_size_t;
-typedef long __kernel_ssize_t;
-typedef long __kernel_ptrdiff_t;
-#endif
+#include <uapi/asm/bitsperlong.h>
#endif /* __ASM_H8300_BITS_PER_LONG */
diff --git a/arch/h8300/include/uapi/asm/bitsperlong.h b/arch/h8300/include/uapi/asm/bitsperlong.h
new file mode 100644
index 000000000000..e56cf72369b6
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/bitsperlong.h
@@ -0,0 +1,14 @@
+#ifndef _UAPI_ASM_H8300_BITS_PER_LONG
+#define _UAPI_ASM_H8300_BITS_PER_LONG
+
+#include <asm-generic/bitsperlong.h>
+
+#if !defined(__ASSEMBLY__)
+/* h8300-unknown-linux required long */
+#define __kernel_size_t __kernel_size_t
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#endif
+
+#endif /* _UAPI_ASM_H8300_BITS_PER_LONG */
--
2.8.1
^ permalink raw reply related
* [PATCH v2 3/7] nios2: put setup.h in uapi
From: Nicolas Dichtel @ 2017-01-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483695839-18660-1-git-send-email-nicolas.dichtel@6wind.com>
This header file is exported, thus move it to uapi.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---
arch/nios2/include/asm/setup.h | 2 +-
arch/nios2/include/uapi/asm/setup.h | 6 ++++++
2 files changed, 7 insertions(+), 1 deletion(-)
create mode 100644 arch/nios2/include/uapi/asm/setup.h
diff --git a/arch/nios2/include/asm/setup.h b/arch/nios2/include/asm/setup.h
index dcbf8cf1a344..d49e9e91bf55 100644
--- a/arch/nios2/include/asm/setup.h
+++ b/arch/nios2/include/asm/setup.h
@@ -19,7 +19,7 @@
#ifndef _ASM_NIOS2_SETUP_H
#define _ASM_NIOS2_SETUP_H
-#include <asm-generic/setup.h>
+#include <uapi/asm/setup.h>
#ifndef __ASSEMBLY__
#ifdef __KERNEL__
diff --git a/arch/nios2/include/uapi/asm/setup.h b/arch/nios2/include/uapi/asm/setup.h
new file mode 100644
index 000000000000..8d8285997ba8
--- /dev/null
+++ b/arch/nios2/include/uapi/asm/setup.h
@@ -0,0 +1,6 @@
+#ifndef _UAPI_ASM_NIOS2_SETUP_H
+#define _UAPI_ASM_NIOS2_SETUP_H
+
+#include <asm-generic/setup.h>
+
+#endif /* _UAPI_ASM_NIOS2_SETUP_H */
--
2.8.1
^ permalink raw reply related
* [PATCH v2 4/7] x86: put msr-index.h in uapi
From: Nicolas Dichtel @ 2017-01-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483695839-18660-1-git-send-email-nicolas.dichtel@6wind.com>
This header file is exported, thus move it to uapi.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---
arch/x86/include/asm/msr-index.h | 694 +--------------------------------
arch/x86/include/uapi/asm/msr-index.h | 698 ++++++++++++++++++++++++++++++++++
2 files changed, 699 insertions(+), 693 deletions(-)
create mode 100644 arch/x86/include/uapi/asm/msr-index.h
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 710273c617b8..1baa0628da74 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -1,698 +1,6 @@
#ifndef _ASM_X86_MSR_INDEX_H
#define _ASM_X86_MSR_INDEX_H
-/*
- * CPU model specific register (MSR) numbers.
- *
- * Do not add new entries to this file unless the definitions are shared
- * between multiple compilation units.
- */
-
-/* x86-64 specific MSRs */
-#define MSR_EFER 0xc0000080 /* extended feature register */
-#define MSR_STAR 0xc0000081 /* legacy mode SYSCALL target */
-#define MSR_LSTAR 0xc0000082 /* long mode SYSCALL target */
-#define MSR_CSTAR 0xc0000083 /* compat mode SYSCALL target */
-#define MSR_SYSCALL_MASK 0xc0000084 /* EFLAGS mask for syscall */
-#define MSR_FS_BASE 0xc0000100 /* 64bit FS base */
-#define MSR_GS_BASE 0xc0000101 /* 64bit GS base */
-#define MSR_KERNEL_GS_BASE 0xc0000102 /* SwapGS GS shadow */
-#define MSR_TSC_AUX 0xc0000103 /* Auxiliary TSC */
-
-/* EFER bits: */
-#define _EFER_SCE 0 /* SYSCALL/SYSRET */
-#define _EFER_LME 8 /* Long mode enable */
-#define _EFER_LMA 10 /* Long mode active (read-only) */
-#define _EFER_NX 11 /* No execute enable */
-#define _EFER_SVME 12 /* Enable virtualization */
-#define _EFER_LMSLE 13 /* Long Mode Segment Limit Enable */
-#define _EFER_FFXSR 14 /* Enable Fast FXSAVE/FXRSTOR */
-
-#define EFER_SCE (1<<_EFER_SCE)
-#define EFER_LME (1<<_EFER_LME)
-#define EFER_LMA (1<<_EFER_LMA)
-#define EFER_NX (1<<_EFER_NX)
-#define EFER_SVME (1<<_EFER_SVME)
-#define EFER_LMSLE (1<<_EFER_LMSLE)
-#define EFER_FFXSR (1<<_EFER_FFXSR)
-
-/* Intel MSRs. Some also available on other CPUs */
-
-#define MSR_PPIN_CTL 0x0000004e
-#define MSR_PPIN 0x0000004f
-
-#define MSR_IA32_PERFCTR0 0x000000c1
-#define MSR_IA32_PERFCTR1 0x000000c2
-#define MSR_FSB_FREQ 0x000000cd
-#define MSR_PLATFORM_INFO 0x000000ce
-
-#define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2
-#define NHM_C3_AUTO_DEMOTE (1UL << 25)
-#define NHM_C1_AUTO_DEMOTE (1UL << 26)
-#define ATM_LNC_C6_AUTO_DEMOTE (1UL << 25)
-#define SNB_C1_AUTO_UNDEMOTE (1UL << 27)
-#define SNB_C3_AUTO_UNDEMOTE (1UL << 28)
-
-#define MSR_MTRRcap 0x000000fe
-#define MSR_IA32_BBL_CR_CTL 0x00000119
-#define MSR_IA32_BBL_CR_CTL3 0x0000011e
-
-#define MSR_IA32_SYSENTER_CS 0x00000174
-#define MSR_IA32_SYSENTER_ESP 0x00000175
-#define MSR_IA32_SYSENTER_EIP 0x00000176
-
-#define MSR_IA32_MCG_CAP 0x00000179
-#define MSR_IA32_MCG_STATUS 0x0000017a
-#define MSR_IA32_MCG_CTL 0x0000017b
-#define MSR_IA32_MCG_EXT_CTL 0x000004d0
-
-#define MSR_OFFCORE_RSP_0 0x000001a6
-#define MSR_OFFCORE_RSP_1 0x000001a7
-#define MSR_TURBO_RATIO_LIMIT 0x000001ad
-#define MSR_TURBO_RATIO_LIMIT1 0x000001ae
-#define MSR_TURBO_RATIO_LIMIT2 0x000001af
-
-#define MSR_LBR_SELECT 0x000001c8
-#define MSR_LBR_TOS 0x000001c9
-#define MSR_LBR_NHM_FROM 0x00000680
-#define MSR_LBR_NHM_TO 0x000006c0
-#define MSR_LBR_CORE_FROM 0x00000040
-#define MSR_LBR_CORE_TO 0x00000060
-
-#define MSR_LBR_INFO_0 0x00000dc0 /* ... 0xddf for _31 */
-#define LBR_INFO_MISPRED BIT_ULL(63)
-#define LBR_INFO_IN_TX BIT_ULL(62)
-#define LBR_INFO_ABORT BIT_ULL(61)
-#define LBR_INFO_CYCLES 0xffff
-
-#define MSR_IA32_PEBS_ENABLE 0x000003f1
-#define MSR_IA32_DS_AREA 0x00000600
-#define MSR_IA32_PERF_CAPABILITIES 0x00000345
-#define MSR_PEBS_LD_LAT_THRESHOLD 0x000003f6
-
-#define MSR_IA32_RTIT_CTL 0x00000570
-#define MSR_IA32_RTIT_STATUS 0x00000571
-#define MSR_IA32_RTIT_ADDR0_A 0x00000580
-#define MSR_IA32_RTIT_ADDR0_B 0x00000581
-#define MSR_IA32_RTIT_ADDR1_A 0x00000582
-#define MSR_IA32_RTIT_ADDR1_B 0x00000583
-#define MSR_IA32_RTIT_ADDR2_A 0x00000584
-#define MSR_IA32_RTIT_ADDR2_B 0x00000585
-#define MSR_IA32_RTIT_ADDR3_A 0x00000586
-#define MSR_IA32_RTIT_ADDR3_B 0x00000587
-#define MSR_IA32_RTIT_CR3_MATCH 0x00000572
-#define MSR_IA32_RTIT_OUTPUT_BASE 0x00000560
-#define MSR_IA32_RTIT_OUTPUT_MASK 0x00000561
-
-#define MSR_MTRRfix64K_00000 0x00000250
-#define MSR_MTRRfix16K_80000 0x00000258
-#define MSR_MTRRfix16K_A0000 0x00000259
-#define MSR_MTRRfix4K_C0000 0x00000268
-#define MSR_MTRRfix4K_C8000 0x00000269
-#define MSR_MTRRfix4K_D0000 0x0000026a
-#define MSR_MTRRfix4K_D8000 0x0000026b
-#define MSR_MTRRfix4K_E0000 0x0000026c
-#define MSR_MTRRfix4K_E8000 0x0000026d
-#define MSR_MTRRfix4K_F0000 0x0000026e
-#define MSR_MTRRfix4K_F8000 0x0000026f
-#define MSR_MTRRdefType 0x000002ff
-
-#define MSR_IA32_CR_PAT 0x00000277
-
-#define MSR_IA32_DEBUGCTLMSR 0x000001d9
-#define MSR_IA32_LASTBRANCHFROMIP 0x000001db
-#define MSR_IA32_LASTBRANCHTOIP 0x000001dc
-#define MSR_IA32_LASTINTFROMIP 0x000001dd
-#define MSR_IA32_LASTINTTOIP 0x000001de
-
-/* DEBUGCTLMSR bits (others vary by model): */
-#define DEBUGCTLMSR_LBR (1UL << 0) /* last branch recording */
-#define DEBUGCTLMSR_BTF (1UL << 1) /* single-step on branches */
-#define DEBUGCTLMSR_TR (1UL << 6)
-#define DEBUGCTLMSR_BTS (1UL << 7)
-#define DEBUGCTLMSR_BTINT (1UL << 8)
-#define DEBUGCTLMSR_BTS_OFF_OS (1UL << 9)
-#define DEBUGCTLMSR_BTS_OFF_USR (1UL << 10)
-#define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI (1UL << 11)
-
-#define MSR_PEBS_FRONTEND 0x000003f7
-
-#define MSR_IA32_POWER_CTL 0x000001fc
-
-#define MSR_IA32_MC0_CTL 0x00000400
-#define MSR_IA32_MC0_STATUS 0x00000401
-#define MSR_IA32_MC0_ADDR 0x00000402
-#define MSR_IA32_MC0_MISC 0x00000403
-
-/* C-state Residency Counters */
-#define MSR_PKG_C3_RESIDENCY 0x000003f8
-#define MSR_PKG_C6_RESIDENCY 0x000003f9
-#define MSR_PKG_C7_RESIDENCY 0x000003fa
-#define MSR_CORE_C3_RESIDENCY 0x000003fc
-#define MSR_CORE_C6_RESIDENCY 0x000003fd
-#define MSR_CORE_C7_RESIDENCY 0x000003fe
-#define MSR_KNL_CORE_C6_RESIDENCY 0x000003ff
-#define MSR_PKG_C2_RESIDENCY 0x0000060d
-#define MSR_PKG_C8_RESIDENCY 0x00000630
-#define MSR_PKG_C9_RESIDENCY 0x00000631
-#define MSR_PKG_C10_RESIDENCY 0x00000632
-
-/* Interrupt Response Limit */
-#define MSR_PKGC3_IRTL 0x0000060a
-#define MSR_PKGC6_IRTL 0x0000060b
-#define MSR_PKGC7_IRTL 0x0000060c
-#define MSR_PKGC8_IRTL 0x00000633
-#define MSR_PKGC9_IRTL 0x00000634
-#define MSR_PKGC10_IRTL 0x00000635
-
-/* Run Time Average Power Limiting (RAPL) Interface */
-
-#define MSR_RAPL_POWER_UNIT 0x00000606
-
-#define MSR_PKG_POWER_LIMIT 0x00000610
-#define MSR_PKG_ENERGY_STATUS 0x00000611
-#define MSR_PKG_PERF_STATUS 0x00000613
-#define MSR_PKG_POWER_INFO 0x00000614
-
-#define MSR_DRAM_POWER_LIMIT 0x00000618
-#define MSR_DRAM_ENERGY_STATUS 0x00000619
-#define MSR_DRAM_PERF_STATUS 0x0000061b
-#define MSR_DRAM_POWER_INFO 0x0000061c
-
-#define MSR_PP0_POWER_LIMIT 0x00000638
-#define MSR_PP0_ENERGY_STATUS 0x00000639
-#define MSR_PP0_POLICY 0x0000063a
-#define MSR_PP0_PERF_STATUS 0x0000063b
-
-#define MSR_PP1_POWER_LIMIT 0x00000640
-#define MSR_PP1_ENERGY_STATUS 0x00000641
-#define MSR_PP1_POLICY 0x00000642
-
-/* Config TDP MSRs */
-#define MSR_CONFIG_TDP_NOMINAL 0x00000648
-#define MSR_CONFIG_TDP_LEVEL_1 0x00000649
-#define MSR_CONFIG_TDP_LEVEL_2 0x0000064A
-#define MSR_CONFIG_TDP_CONTROL 0x0000064B
-#define MSR_TURBO_ACTIVATION_RATIO 0x0000064C
-
-#define MSR_PLATFORM_ENERGY_STATUS 0x0000064D
-
-#define MSR_PKG_WEIGHTED_CORE_C0_RES 0x00000658
-#define MSR_PKG_ANY_CORE_C0_RES 0x00000659
-#define MSR_PKG_ANY_GFXE_C0_RES 0x0000065A
-#define MSR_PKG_BOTH_CORE_GFXE_C0_RES 0x0000065B
-
-#define MSR_CORE_C1_RES 0x00000660
-
-#define MSR_CC6_DEMOTION_POLICY_CONFIG 0x00000668
-#define MSR_MC6_DEMOTION_POLICY_CONFIG 0x00000669
-
-#define MSR_CORE_PERF_LIMIT_REASONS 0x00000690
-#define MSR_GFX_PERF_LIMIT_REASONS 0x000006B0
-#define MSR_RING_PERF_LIMIT_REASONS 0x000006B1
-
-/* Hardware P state interface */
-#define MSR_PPERF 0x0000064e
-#define MSR_PERF_LIMIT_REASONS 0x0000064f
-#define MSR_PM_ENABLE 0x00000770
-#define MSR_HWP_CAPABILITIES 0x00000771
-#define MSR_HWP_REQUEST_PKG 0x00000772
-#define MSR_HWP_INTERRUPT 0x00000773
-#define MSR_HWP_REQUEST 0x00000774
-#define MSR_HWP_STATUS 0x00000777
-
-/* CPUID.6.EAX */
-#define HWP_BASE_BIT (1<<7)
-#define HWP_NOTIFICATIONS_BIT (1<<8)
-#define HWP_ACTIVITY_WINDOW_BIT (1<<9)
-#define HWP_ENERGY_PERF_PREFERENCE_BIT (1<<10)
-#define HWP_PACKAGE_LEVEL_REQUEST_BIT (1<<11)
-
-/* IA32_HWP_CAPABILITIES */
-#define HWP_HIGHEST_PERF(x) (((x) >> 0) & 0xff)
-#define HWP_GUARANTEED_PERF(x) (((x) >> 8) & 0xff)
-#define HWP_MOSTEFFICIENT_PERF(x) (((x) >> 16) & 0xff)
-#define HWP_LOWEST_PERF(x) (((x) >> 24) & 0xff)
-
-/* IA32_HWP_REQUEST */
-#define HWP_MIN_PERF(x) (x & 0xff)
-#define HWP_MAX_PERF(x) ((x & 0xff) << 8)
-#define HWP_DESIRED_PERF(x) ((x & 0xff) << 16)
-#define HWP_ENERGY_PERF_PREFERENCE(x) ((x & 0xff) << 24)
-#define HWP_ACTIVITY_WINDOW(x) ((x & 0xff3) << 32)
-#define HWP_PACKAGE_CONTROL(x) ((x & 0x1) << 42)
-
-/* IA32_HWP_STATUS */
-#define HWP_GUARANTEED_CHANGE(x) (x & 0x1)
-#define HWP_EXCURSION_TO_MINIMUM(x) (x & 0x4)
-
-/* IA32_HWP_INTERRUPT */
-#define HWP_CHANGE_TO_GUARANTEED_INT(x) (x & 0x1)
-#define HWP_EXCURSION_TO_MINIMUM_INT(x) (x & 0x2)
-
-#define MSR_AMD64_MC0_MASK 0xc0010044
-
-#define MSR_IA32_MCx_CTL(x) (MSR_IA32_MC0_CTL + 4*(x))
-#define MSR_IA32_MCx_STATUS(x) (MSR_IA32_MC0_STATUS + 4*(x))
-#define MSR_IA32_MCx_ADDR(x) (MSR_IA32_MC0_ADDR + 4*(x))
-#define MSR_IA32_MCx_MISC(x) (MSR_IA32_MC0_MISC + 4*(x))
-
-#define MSR_AMD64_MCx_MASK(x) (MSR_AMD64_MC0_MASK + (x))
-
-/* These are consecutive and not in the normal 4er MCE bank block */
-#define MSR_IA32_MC0_CTL2 0x00000280
-#define MSR_IA32_MCx_CTL2(x) (MSR_IA32_MC0_CTL2 + (x))
-
-#define MSR_P6_PERFCTR0 0x000000c1
-#define MSR_P6_PERFCTR1 0x000000c2
-#define MSR_P6_EVNTSEL0 0x00000186
-#define MSR_P6_EVNTSEL1 0x00000187
-
-#define MSR_KNC_PERFCTR0 0x00000020
-#define MSR_KNC_PERFCTR1 0x00000021
-#define MSR_KNC_EVNTSEL0 0x00000028
-#define MSR_KNC_EVNTSEL1 0x00000029
-
-/* Alternative perfctr range with full access. */
-#define MSR_IA32_PMC0 0x000004c1
-
-/* AMD64 MSRs. Not complete. See the architecture manual for a more
- complete list. */
-
-#define MSR_AMD64_PATCH_LEVEL 0x0000008b
-#define MSR_AMD64_TSC_RATIO 0xc0000104
-#define MSR_AMD64_NB_CFG 0xc001001f
-#define MSR_AMD64_PATCH_LOADER 0xc0010020
-#define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140
-#define MSR_AMD64_OSVW_STATUS 0xc0010141
-#define MSR_AMD64_LS_CFG 0xc0011020
-#define MSR_AMD64_DC_CFG 0xc0011022
-#define MSR_AMD64_BU_CFG2 0xc001102a
-#define MSR_AMD64_IBSFETCHCTL 0xc0011030
-#define MSR_AMD64_IBSFETCHLINAD 0xc0011031
-#define MSR_AMD64_IBSFETCHPHYSAD 0xc0011032
-#define MSR_AMD64_IBSFETCH_REG_COUNT 3
-#define MSR_AMD64_IBSFETCH_REG_MASK ((1UL<<MSR_AMD64_IBSFETCH_REG_COUNT)-1)
-#define MSR_AMD64_IBSOPCTL 0xc0011033
-#define MSR_AMD64_IBSOPRIP 0xc0011034
-#define MSR_AMD64_IBSOPDATA 0xc0011035
-#define MSR_AMD64_IBSOPDATA2 0xc0011036
-#define MSR_AMD64_IBSOPDATA3 0xc0011037
-#define MSR_AMD64_IBSDCLINAD 0xc0011038
-#define MSR_AMD64_IBSDCPHYSAD 0xc0011039
-#define MSR_AMD64_IBSOP_REG_COUNT 7
-#define MSR_AMD64_IBSOP_REG_MASK ((1UL<<MSR_AMD64_IBSOP_REG_COUNT)-1)
-#define MSR_AMD64_IBSCTL 0xc001103a
-#define MSR_AMD64_IBSBRTARGET 0xc001103b
-#define MSR_AMD64_IBSOPDATA4 0xc001103d
-#define MSR_AMD64_IBS_REG_COUNT_MAX 8 /* includes MSR_AMD64_IBSBRTARGET */
-
-/* Fam 17h MSRs */
-#define MSR_F17H_IRPERF 0xc00000e9
-
-/* Fam 16h MSRs */
-#define MSR_F16H_L2I_PERF_CTL 0xc0010230
-#define MSR_F16H_L2I_PERF_CTR 0xc0010231
-#define MSR_F16H_DR1_ADDR_MASK 0xc0011019
-#define MSR_F16H_DR2_ADDR_MASK 0xc001101a
-#define MSR_F16H_DR3_ADDR_MASK 0xc001101b
-#define MSR_F16H_DR0_ADDR_MASK 0xc0011027
-
-/* Fam 15h MSRs */
-#define MSR_F15H_PERF_CTL 0xc0010200
-#define MSR_F15H_PERF_CTR 0xc0010201
-#define MSR_F15H_NB_PERF_CTL 0xc0010240
-#define MSR_F15H_NB_PERF_CTR 0xc0010241
-#define MSR_F15H_PTSC 0xc0010280
-#define MSR_F15H_IC_CFG 0xc0011021
-
-/* Fam 10h MSRs */
-#define MSR_FAM10H_MMIO_CONF_BASE 0xc0010058
-#define FAM10H_MMIO_CONF_ENABLE (1<<0)
-#define FAM10H_MMIO_CONF_BUSRANGE_MASK 0xf
-#define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
-#define FAM10H_MMIO_CONF_BASE_MASK 0xfffffffULL
-#define FAM10H_MMIO_CONF_BASE_SHIFT 20
-#define MSR_FAM10H_NODE_ID 0xc001100c
-
-/* K8 MSRs */
-#define MSR_K8_TOP_MEM1 0xc001001a
-#define MSR_K8_TOP_MEM2 0xc001001d
-#define MSR_K8_SYSCFG 0xc0010010
-#define MSR_K8_INT_PENDING_MSG 0xc0010055
-/* C1E active bits in int pending message */
-#define K8_INTP_C1E_ACTIVE_MASK 0x18000000
-#define MSR_K8_TSEG_ADDR 0xc0010112
-#define MSR_K8_TSEG_MASK 0xc0010113
-#define K8_MTRRFIXRANGE_DRAM_ENABLE 0x00040000 /* MtrrFixDramEn bit */
-#define K8_MTRRFIXRANGE_DRAM_MODIFY 0x00080000 /* MtrrFixDramModEn bit */
-#define K8_MTRR_RDMEM_WRMEM_MASK 0x18181818 /* Mask: RdMem|WrMem */
-
-/* K7 MSRs */
-#define MSR_K7_EVNTSEL0 0xc0010000
-#define MSR_K7_PERFCTR0 0xc0010004
-#define MSR_K7_EVNTSEL1 0xc0010001
-#define MSR_K7_PERFCTR1 0xc0010005
-#define MSR_K7_EVNTSEL2 0xc0010002
-#define MSR_K7_PERFCTR2 0xc0010006
-#define MSR_K7_EVNTSEL3 0xc0010003
-#define MSR_K7_PERFCTR3 0xc0010007
-#define MSR_K7_CLK_CTL 0xc001001b
-#define MSR_K7_HWCR 0xc0010015
-#define MSR_K7_FID_VID_CTL 0xc0010041
-#define MSR_K7_FID_VID_STATUS 0xc0010042
-
-/* K6 MSRs */
-#define MSR_K6_WHCR 0xc0000082
-#define MSR_K6_UWCCR 0xc0000085
-#define MSR_K6_EPMR 0xc0000086
-#define MSR_K6_PSOR 0xc0000087
-#define MSR_K6_PFIR 0xc0000088
-
-/* Centaur-Hauls/IDT defined MSRs. */
-#define MSR_IDT_FCR1 0x00000107
-#define MSR_IDT_FCR2 0x00000108
-#define MSR_IDT_FCR3 0x00000109
-#define MSR_IDT_FCR4 0x0000010a
-
-#define MSR_IDT_MCR0 0x00000110
-#define MSR_IDT_MCR1 0x00000111
-#define MSR_IDT_MCR2 0x00000112
-#define MSR_IDT_MCR3 0x00000113
-#define MSR_IDT_MCR4 0x00000114
-#define MSR_IDT_MCR5 0x00000115
-#define MSR_IDT_MCR6 0x00000116
-#define MSR_IDT_MCR7 0x00000117
-#define MSR_IDT_MCR_CTRL 0x00000120
-
-/* VIA Cyrix defined MSRs*/
-#define MSR_VIA_FCR 0x00001107
-#define MSR_VIA_LONGHAUL 0x0000110a
-#define MSR_VIA_RNG 0x0000110b
-#define MSR_VIA_BCR2 0x00001147
-
-/* Transmeta defined MSRs */
-#define MSR_TMTA_LONGRUN_CTRL 0x80868010
-#define MSR_TMTA_LONGRUN_FLAGS 0x80868011
-#define MSR_TMTA_LRTI_READOUT 0x80868018
-#define MSR_TMTA_LRTI_VOLT_MHZ 0x8086801a
-
-/* Intel defined MSRs. */
-#define MSR_IA32_P5_MC_ADDR 0x00000000
-#define MSR_IA32_P5_MC_TYPE 0x00000001
-#define MSR_IA32_TSC 0x00000010
-#define MSR_IA32_PLATFORM_ID 0x00000017
-#define MSR_IA32_EBL_CR_POWERON 0x0000002a
-#define MSR_EBC_FREQUENCY_ID 0x0000002c
-#define MSR_SMI_COUNT 0x00000034
-#define MSR_IA32_FEATURE_CONTROL 0x0000003a
-#define MSR_IA32_TSC_ADJUST 0x0000003b
-#define MSR_IA32_BNDCFGS 0x00000d90
-
-#define MSR_IA32_XSS 0x00000da0
-
-#define FEATURE_CONTROL_LOCKED (1<<0)
-#define FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX (1<<1)
-#define FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX (1<<2)
-#define FEATURE_CONTROL_LMCE (1<<20)
-
-#define MSR_IA32_APICBASE 0x0000001b
-#define MSR_IA32_APICBASE_BSP (1<<8)
-#define MSR_IA32_APICBASE_ENABLE (1<<11)
-#define MSR_IA32_APICBASE_BASE (0xfffff<<12)
-
-#define MSR_IA32_TSCDEADLINE 0x000006e0
-
-#define MSR_IA32_UCODE_WRITE 0x00000079
-#define MSR_IA32_UCODE_REV 0x0000008b
-
-#define MSR_IA32_SMM_MONITOR_CTL 0x0000009b
-#define MSR_IA32_SMBASE 0x0000009e
-
-#define MSR_IA32_PERF_STATUS 0x00000198
-#define MSR_IA32_PERF_CTL 0x00000199
-#define INTEL_PERF_CTL_MASK 0xffff
-#define MSR_AMD_PSTATE_DEF_BASE 0xc0010064
-#define MSR_AMD_PERF_STATUS 0xc0010063
-#define MSR_AMD_PERF_CTL 0xc0010062
-
-#define MSR_IA32_MPERF 0x000000e7
-#define MSR_IA32_APERF 0x000000e8
-
-#define MSR_IA32_THERM_CONTROL 0x0000019a
-#define MSR_IA32_THERM_INTERRUPT 0x0000019b
-
-#define THERM_INT_HIGH_ENABLE (1 << 0)
-#define THERM_INT_LOW_ENABLE (1 << 1)
-#define THERM_INT_PLN_ENABLE (1 << 24)
-
-#define MSR_IA32_THERM_STATUS 0x0000019c
-
-#define THERM_STATUS_PROCHOT (1 << 0)
-#define THERM_STATUS_POWER_LIMIT (1 << 10)
-
-#define MSR_THERM2_CTL 0x0000019d
-
-#define MSR_THERM2_CTL_TM_SELECT (1ULL << 16)
-
-#define MSR_IA32_MISC_ENABLE 0x000001a0
-
-#define MSR_IA32_TEMPERATURE_TARGET 0x000001a2
-
-#define MSR_MISC_PWR_MGMT 0x000001aa
-
-#define MSR_IA32_ENERGY_PERF_BIAS 0x000001b0
-#define ENERGY_PERF_BIAS_PERFORMANCE 0
-#define ENERGY_PERF_BIAS_NORMAL 6
-#define ENERGY_PERF_BIAS_POWERSAVE 15
-
-#define MSR_IA32_PACKAGE_THERM_STATUS 0x000001b1
-
-#define PACKAGE_THERM_STATUS_PROCHOT (1 << 0)
-#define PACKAGE_THERM_STATUS_POWER_LIMIT (1 << 10)
-
-#define MSR_IA32_PACKAGE_THERM_INTERRUPT 0x000001b2
-
-#define PACKAGE_THERM_INT_HIGH_ENABLE (1 << 0)
-#define PACKAGE_THERM_INT_LOW_ENABLE (1 << 1)
-#define PACKAGE_THERM_INT_PLN_ENABLE (1 << 24)
-
-/* Thermal Thresholds Support */
-#define THERM_INT_THRESHOLD0_ENABLE (1 << 15)
-#define THERM_SHIFT_THRESHOLD0 8
-#define THERM_MASK_THRESHOLD0 (0x7f << THERM_SHIFT_THRESHOLD0)
-#define THERM_INT_THRESHOLD1_ENABLE (1 << 23)
-#define THERM_SHIFT_THRESHOLD1 16
-#define THERM_MASK_THRESHOLD1 (0x7f << THERM_SHIFT_THRESHOLD1)
-#define THERM_STATUS_THRESHOLD0 (1 << 6)
-#define THERM_LOG_THRESHOLD0 (1 << 7)
-#define THERM_STATUS_THRESHOLD1 (1 << 8)
-#define THERM_LOG_THRESHOLD1 (1 << 9)
-
-/* MISC_ENABLE bits: architectural */
-#define MSR_IA32_MISC_ENABLE_FAST_STRING_BIT 0
-#define MSR_IA32_MISC_ENABLE_FAST_STRING (1ULL << MSR_IA32_MISC_ENABLE_FAST_STRING_BIT)
-#define MSR_IA32_MISC_ENABLE_TCC_BIT 1
-#define MSR_IA32_MISC_ENABLE_TCC (1ULL << MSR_IA32_MISC_ENABLE_TCC_BIT)
-#define MSR_IA32_MISC_ENABLE_EMON_BIT 7
-#define MSR_IA32_MISC_ENABLE_EMON (1ULL << MSR_IA32_MISC_ENABLE_EMON_BIT)
-#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL_BIT 11
-#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL (1ULL << MSR_IA32_MISC_ENABLE_BTS_UNAVAIL_BIT)
-#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL_BIT 12
-#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL (1ULL << MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL_BIT)
-#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP_BIT 16
-#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP (1ULL << MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP_BIT)
-#define MSR_IA32_MISC_ENABLE_MWAIT_BIT 18
-#define MSR_IA32_MISC_ENABLE_MWAIT (1ULL << MSR_IA32_MISC_ENABLE_MWAIT_BIT)
-#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID_BIT 22
-#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID (1ULL << MSR_IA32_MISC_ENABLE_LIMIT_CPUID_BIT)
-#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE_BIT 23
-#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_XTPR_DISABLE_BIT)
-#define MSR_IA32_MISC_ENABLE_XD_DISABLE_BIT 34
-#define MSR_IA32_MISC_ENABLE_XD_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_XD_DISABLE_BIT)
-
-/* MISC_ENABLE bits: model-specific, meaning may vary from core to core */
-#define MSR_IA32_MISC_ENABLE_X87_COMPAT_BIT 2
-#define MSR_IA32_MISC_ENABLE_X87_COMPAT (1ULL << MSR_IA32_MISC_ENABLE_X87_COMPAT_BIT)
-#define MSR_IA32_MISC_ENABLE_TM1_BIT 3
-#define MSR_IA32_MISC_ENABLE_TM1 (1ULL << MSR_IA32_MISC_ENABLE_TM1_BIT)
-#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE_BIT 4
-#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE_BIT)
-#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE_BIT 6
-#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE_BIT)
-#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK_BIT 8
-#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK (1ULL << MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK_BIT)
-#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT 9
-#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT)
-#define MSR_IA32_MISC_ENABLE_FERR_BIT 10
-#define MSR_IA32_MISC_ENABLE_FERR (1ULL << MSR_IA32_MISC_ENABLE_FERR_BIT)
-#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX_BIT 10
-#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX (1ULL << MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX_BIT)
-#define MSR_IA32_MISC_ENABLE_TM2_BIT 13
-#define MSR_IA32_MISC_ENABLE_TM2 (1ULL << MSR_IA32_MISC_ENABLE_TM2_BIT)
-#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE_BIT 19
-#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE_BIT)
-#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK_BIT 20
-#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK (1ULL << MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK_BIT)
-#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT_BIT 24
-#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT (1ULL << MSR_IA32_MISC_ENABLE_L1D_CONTEXT_BIT)
-#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE_BIT 37
-#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE_BIT)
-#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE_BIT 38
-#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_TURBO_DISABLE_BIT)
-#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE_BIT 39
-#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE_BIT)
-
-#define MSR_IA32_TSC_DEADLINE 0x000006E0
-
-/* P4/Xeon+ specific */
-#define MSR_IA32_MCG_EAX 0x00000180
-#define MSR_IA32_MCG_EBX 0x00000181
-#define MSR_IA32_MCG_ECX 0x00000182
-#define MSR_IA32_MCG_EDX 0x00000183
-#define MSR_IA32_MCG_ESI 0x00000184
-#define MSR_IA32_MCG_EDI 0x00000185
-#define MSR_IA32_MCG_EBP 0x00000186
-#define MSR_IA32_MCG_ESP 0x00000187
-#define MSR_IA32_MCG_EFLAGS 0x00000188
-#define MSR_IA32_MCG_EIP 0x00000189
-#define MSR_IA32_MCG_RESERVED 0x0000018a
-
-/* Pentium IV performance counter MSRs */
-#define MSR_P4_BPU_PERFCTR0 0x00000300
-#define MSR_P4_BPU_PERFCTR1 0x00000301
-#define MSR_P4_BPU_PERFCTR2 0x00000302
-#define MSR_P4_BPU_PERFCTR3 0x00000303
-#define MSR_P4_MS_PERFCTR0 0x00000304
-#define MSR_P4_MS_PERFCTR1 0x00000305
-#define MSR_P4_MS_PERFCTR2 0x00000306
-#define MSR_P4_MS_PERFCTR3 0x00000307
-#define MSR_P4_FLAME_PERFCTR0 0x00000308
-#define MSR_P4_FLAME_PERFCTR1 0x00000309
-#define MSR_P4_FLAME_PERFCTR2 0x0000030a
-#define MSR_P4_FLAME_PERFCTR3 0x0000030b
-#define MSR_P4_IQ_PERFCTR0 0x0000030c
-#define MSR_P4_IQ_PERFCTR1 0x0000030d
-#define MSR_P4_IQ_PERFCTR2 0x0000030e
-#define MSR_P4_IQ_PERFCTR3 0x0000030f
-#define MSR_P4_IQ_PERFCTR4 0x00000310
-#define MSR_P4_IQ_PERFCTR5 0x00000311
-#define MSR_P4_BPU_CCCR0 0x00000360
-#define MSR_P4_BPU_CCCR1 0x00000361
-#define MSR_P4_BPU_CCCR2 0x00000362
-#define MSR_P4_BPU_CCCR3 0x00000363
-#define MSR_P4_MS_CCCR0 0x00000364
-#define MSR_P4_MS_CCCR1 0x00000365
-#define MSR_P4_MS_CCCR2 0x00000366
-#define MSR_P4_MS_CCCR3 0x00000367
-#define MSR_P4_FLAME_CCCR0 0x00000368
-#define MSR_P4_FLAME_CCCR1 0x00000369
-#define MSR_P4_FLAME_CCCR2 0x0000036a
-#define MSR_P4_FLAME_CCCR3 0x0000036b
-#define MSR_P4_IQ_CCCR0 0x0000036c
-#define MSR_P4_IQ_CCCR1 0x0000036d
-#define MSR_P4_IQ_CCCR2 0x0000036e
-#define MSR_P4_IQ_CCCR3 0x0000036f
-#define MSR_P4_IQ_CCCR4 0x00000370
-#define MSR_P4_IQ_CCCR5 0x00000371
-#define MSR_P4_ALF_ESCR0 0x000003ca
-#define MSR_P4_ALF_ESCR1 0x000003cb
-#define MSR_P4_BPU_ESCR0 0x000003b2
-#define MSR_P4_BPU_ESCR1 0x000003b3
-#define MSR_P4_BSU_ESCR0 0x000003a0
-#define MSR_P4_BSU_ESCR1 0x000003a1
-#define MSR_P4_CRU_ESCR0 0x000003b8
-#define MSR_P4_CRU_ESCR1 0x000003b9
-#define MSR_P4_CRU_ESCR2 0x000003cc
-#define MSR_P4_CRU_ESCR3 0x000003cd
-#define MSR_P4_CRU_ESCR4 0x000003e0
-#define MSR_P4_CRU_ESCR5 0x000003e1
-#define MSR_P4_DAC_ESCR0 0x000003a8
-#define MSR_P4_DAC_ESCR1 0x000003a9
-#define MSR_P4_FIRM_ESCR0 0x000003a4
-#define MSR_P4_FIRM_ESCR1 0x000003a5
-#define MSR_P4_FLAME_ESCR0 0x000003a6
-#define MSR_P4_FLAME_ESCR1 0x000003a7
-#define MSR_P4_FSB_ESCR0 0x000003a2
-#define MSR_P4_FSB_ESCR1 0x000003a3
-#define MSR_P4_IQ_ESCR0 0x000003ba
-#define MSR_P4_IQ_ESCR1 0x000003bb
-#define MSR_P4_IS_ESCR0 0x000003b4
-#define MSR_P4_IS_ESCR1 0x000003b5
-#define MSR_P4_ITLB_ESCR0 0x000003b6
-#define MSR_P4_ITLB_ESCR1 0x000003b7
-#define MSR_P4_IX_ESCR0 0x000003c8
-#define MSR_P4_IX_ESCR1 0x000003c9
-#define MSR_P4_MOB_ESCR0 0x000003aa
-#define MSR_P4_MOB_ESCR1 0x000003ab
-#define MSR_P4_MS_ESCR0 0x000003c0
-#define MSR_P4_MS_ESCR1 0x000003c1
-#define MSR_P4_PMH_ESCR0 0x000003ac
-#define MSR_P4_PMH_ESCR1 0x000003ad
-#define MSR_P4_RAT_ESCR0 0x000003bc
-#define MSR_P4_RAT_ESCR1 0x000003bd
-#define MSR_P4_SAAT_ESCR0 0x000003ae
-#define MSR_P4_SAAT_ESCR1 0x000003af
-#define MSR_P4_SSU_ESCR0 0x000003be
-#define MSR_P4_SSU_ESCR1 0x000003bf /* guess: not in manual */
-
-#define MSR_P4_TBPU_ESCR0 0x000003c2
-#define MSR_P4_TBPU_ESCR1 0x000003c3
-#define MSR_P4_TC_ESCR0 0x000003c4
-#define MSR_P4_TC_ESCR1 0x000003c5
-#define MSR_P4_U2L_ESCR0 0x000003b0
-#define MSR_P4_U2L_ESCR1 0x000003b1
-
-#define MSR_P4_PEBS_MATRIX_VERT 0x000003f2
-
-/* Intel Core-based CPU performance counters */
-#define MSR_CORE_PERF_FIXED_CTR0 0x00000309
-#define MSR_CORE_PERF_FIXED_CTR1 0x0000030a
-#define MSR_CORE_PERF_FIXED_CTR2 0x0000030b
-#define MSR_CORE_PERF_FIXED_CTR_CTRL 0x0000038d
-#define MSR_CORE_PERF_GLOBAL_STATUS 0x0000038e
-#define MSR_CORE_PERF_GLOBAL_CTRL 0x0000038f
-#define MSR_CORE_PERF_GLOBAL_OVF_CTRL 0x00000390
-
-/* Geode defined MSRs */
-#define MSR_GEODE_BUSCONT_CONF0 0x00001900
-
-/* Intel VT MSRs */
-#define MSR_IA32_VMX_BASIC 0x00000480
-#define MSR_IA32_VMX_PINBASED_CTLS 0x00000481
-#define MSR_IA32_VMX_PROCBASED_CTLS 0x00000482
-#define MSR_IA32_VMX_EXIT_CTLS 0x00000483
-#define MSR_IA32_VMX_ENTRY_CTLS 0x00000484
-#define MSR_IA32_VMX_MISC 0x00000485
-#define MSR_IA32_VMX_CR0_FIXED0 0x00000486
-#define MSR_IA32_VMX_CR0_FIXED1 0x00000487
-#define MSR_IA32_VMX_CR4_FIXED0 0x00000488
-#define MSR_IA32_VMX_CR4_FIXED1 0x00000489
-#define MSR_IA32_VMX_VMCS_ENUM 0x0000048a
-#define MSR_IA32_VMX_PROCBASED_CTLS2 0x0000048b
-#define MSR_IA32_VMX_EPT_VPID_CAP 0x0000048c
-#define MSR_IA32_VMX_TRUE_PINBASED_CTLS 0x0000048d
-#define MSR_IA32_VMX_TRUE_PROCBASED_CTLS 0x0000048e
-#define MSR_IA32_VMX_TRUE_EXIT_CTLS 0x0000048f
-#define MSR_IA32_VMX_TRUE_ENTRY_CTLS 0x00000490
-#define MSR_IA32_VMX_VMFUNC 0x00000491
-
-/* VMX_BASIC bits and bitmasks */
-#define VMX_BASIC_VMCS_SIZE_SHIFT 32
-#define VMX_BASIC_TRUE_CTLS (1ULL << 55)
-#define VMX_BASIC_64 0x0001000000000000LLU
-#define VMX_BASIC_MEM_TYPE_SHIFT 50
-#define VMX_BASIC_MEM_TYPE_MASK 0x003c000000000000LLU
-#define VMX_BASIC_MEM_TYPE_WB 6LLU
-#define VMX_BASIC_INOUT 0x0040000000000000LLU
-
-/* MSR_IA32_VMX_MISC bits */
-#define MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS (1ULL << 29)
-#define MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE 0x1F
-/* AMD-V MSRs */
-
-#define MSR_VM_CR 0xc0010114
-#define MSR_VM_IGNNE 0xc0010115
-#define MSR_VM_HSAVE_PA 0xc0010117
+#include <uapi/asm/msr-index.h>
#endif /* _ASM_X86_MSR_INDEX_H */
diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h
new file mode 100644
index 000000000000..d097e832ee3c
--- /dev/null
+++ b/arch/x86/include/uapi/asm/msr-index.h
@@ -0,0 +1,698 @@
+#ifndef _UAPI_ASM_X86_MSR_INDEX_H
+#define _UAPI_ASM_X86_MSR_INDEX_H
+
+/*
+ * CPU model specific register (MSR) numbers.
+ *
+ * Do not add new entries to this file unless the definitions are shared
+ * between multiple compilation units.
+ */
+
+/* x86-64 specific MSRs */
+#define MSR_EFER 0xc0000080 /* extended feature register */
+#define MSR_STAR 0xc0000081 /* legacy mode SYSCALL target */
+#define MSR_LSTAR 0xc0000082 /* long mode SYSCALL target */
+#define MSR_CSTAR 0xc0000083 /* compat mode SYSCALL target */
+#define MSR_SYSCALL_MASK 0xc0000084 /* EFLAGS mask for syscall */
+#define MSR_FS_BASE 0xc0000100 /* 64bit FS base */
+#define MSR_GS_BASE 0xc0000101 /* 64bit GS base */
+#define MSR_KERNEL_GS_BASE 0xc0000102 /* SwapGS GS shadow */
+#define MSR_TSC_AUX 0xc0000103 /* Auxiliary TSC */
+
+/* EFER bits: */
+#define _EFER_SCE 0 /* SYSCALL/SYSRET */
+#define _EFER_LME 8 /* Long mode enable */
+#define _EFER_LMA 10 /* Long mode active (read-only) */
+#define _EFER_NX 11 /* No execute enable */
+#define _EFER_SVME 12 /* Enable virtualization */
+#define _EFER_LMSLE 13 /* Long Mode Segment Limit Enable */
+#define _EFER_FFXSR 14 /* Enable Fast FXSAVE/FXRSTOR */
+
+#define EFER_SCE (1<<_EFER_SCE)
+#define EFER_LME (1<<_EFER_LME)
+#define EFER_LMA (1<<_EFER_LMA)
+#define EFER_NX (1<<_EFER_NX)
+#define EFER_SVME (1<<_EFER_SVME)
+#define EFER_LMSLE (1<<_EFER_LMSLE)
+#define EFER_FFXSR (1<<_EFER_FFXSR)
+
+/* Intel MSRs. Some also available on other CPUs */
+
+#define MSR_PPIN_CTL 0x0000004e
+#define MSR_PPIN 0x0000004f
+
+#define MSR_IA32_PERFCTR0 0x000000c1
+#define MSR_IA32_PERFCTR1 0x000000c2
+#define MSR_FSB_FREQ 0x000000cd
+#define MSR_PLATFORM_INFO 0x000000ce
+
+#define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2
+#define NHM_C3_AUTO_DEMOTE (1UL << 25)
+#define NHM_C1_AUTO_DEMOTE (1UL << 26)
+#define ATM_LNC_C6_AUTO_DEMOTE (1UL << 25)
+#define SNB_C1_AUTO_UNDEMOTE (1UL << 27)
+#define SNB_C3_AUTO_UNDEMOTE (1UL << 28)
+
+#define MSR_MTRRcap 0x000000fe
+#define MSR_IA32_BBL_CR_CTL 0x00000119
+#define MSR_IA32_BBL_CR_CTL3 0x0000011e
+
+#define MSR_IA32_SYSENTER_CS 0x00000174
+#define MSR_IA32_SYSENTER_ESP 0x00000175
+#define MSR_IA32_SYSENTER_EIP 0x00000176
+
+#define MSR_IA32_MCG_CAP 0x00000179
+#define MSR_IA32_MCG_STATUS 0x0000017a
+#define MSR_IA32_MCG_CTL 0x0000017b
+#define MSR_IA32_MCG_EXT_CTL 0x000004d0
+
+#define MSR_OFFCORE_RSP_0 0x000001a6
+#define MSR_OFFCORE_RSP_1 0x000001a7
+#define MSR_TURBO_RATIO_LIMIT 0x000001ad
+#define MSR_TURBO_RATIO_LIMIT1 0x000001ae
+#define MSR_TURBO_RATIO_LIMIT2 0x000001af
+
+#define MSR_LBR_SELECT 0x000001c8
+#define MSR_LBR_TOS 0x000001c9
+#define MSR_LBR_NHM_FROM 0x00000680
+#define MSR_LBR_NHM_TO 0x000006c0
+#define MSR_LBR_CORE_FROM 0x00000040
+#define MSR_LBR_CORE_TO 0x00000060
+
+#define MSR_LBR_INFO_0 0x00000dc0 /* ... 0xddf for _31 */
+#define LBR_INFO_MISPRED BIT_ULL(63)
+#define LBR_INFO_IN_TX BIT_ULL(62)
+#define LBR_INFO_ABORT BIT_ULL(61)
+#define LBR_INFO_CYCLES 0xffff
+
+#define MSR_IA32_PEBS_ENABLE 0x000003f1
+#define MSR_IA32_DS_AREA 0x00000600
+#define MSR_IA32_PERF_CAPABILITIES 0x00000345
+#define MSR_PEBS_LD_LAT_THRESHOLD 0x000003f6
+
+#define MSR_IA32_RTIT_CTL 0x00000570
+#define MSR_IA32_RTIT_STATUS 0x00000571
+#define MSR_IA32_RTIT_ADDR0_A 0x00000580
+#define MSR_IA32_RTIT_ADDR0_B 0x00000581
+#define MSR_IA32_RTIT_ADDR1_A 0x00000582
+#define MSR_IA32_RTIT_ADDR1_B 0x00000583
+#define MSR_IA32_RTIT_ADDR2_A 0x00000584
+#define MSR_IA32_RTIT_ADDR2_B 0x00000585
+#define MSR_IA32_RTIT_ADDR3_A 0x00000586
+#define MSR_IA32_RTIT_ADDR3_B 0x00000587
+#define MSR_IA32_RTIT_CR3_MATCH 0x00000572
+#define MSR_IA32_RTIT_OUTPUT_BASE 0x00000560
+#define MSR_IA32_RTIT_OUTPUT_MASK 0x00000561
+
+#define MSR_MTRRfix64K_00000 0x00000250
+#define MSR_MTRRfix16K_80000 0x00000258
+#define MSR_MTRRfix16K_A0000 0x00000259
+#define MSR_MTRRfix4K_C0000 0x00000268
+#define MSR_MTRRfix4K_C8000 0x00000269
+#define MSR_MTRRfix4K_D0000 0x0000026a
+#define MSR_MTRRfix4K_D8000 0x0000026b
+#define MSR_MTRRfix4K_E0000 0x0000026c
+#define MSR_MTRRfix4K_E8000 0x0000026d
+#define MSR_MTRRfix4K_F0000 0x0000026e
+#define MSR_MTRRfix4K_F8000 0x0000026f
+#define MSR_MTRRdefType 0x000002ff
+
+#define MSR_IA32_CR_PAT 0x00000277
+
+#define MSR_IA32_DEBUGCTLMSR 0x000001d9
+#define MSR_IA32_LASTBRANCHFROMIP 0x000001db
+#define MSR_IA32_LASTBRANCHTOIP 0x000001dc
+#define MSR_IA32_LASTINTFROMIP 0x000001dd
+#define MSR_IA32_LASTINTTOIP 0x000001de
+
+/* DEBUGCTLMSR bits (others vary by model): */
+#define DEBUGCTLMSR_LBR (1UL << 0) /* last branch recording */
+#define DEBUGCTLMSR_BTF (1UL << 1) /* single-step on branches */
+#define DEBUGCTLMSR_TR (1UL << 6)
+#define DEBUGCTLMSR_BTS (1UL << 7)
+#define DEBUGCTLMSR_BTINT (1UL << 8)
+#define DEBUGCTLMSR_BTS_OFF_OS (1UL << 9)
+#define DEBUGCTLMSR_BTS_OFF_USR (1UL << 10)
+#define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI (1UL << 11)
+
+#define MSR_PEBS_FRONTEND 0x000003f7
+
+#define MSR_IA32_POWER_CTL 0x000001fc
+
+#define MSR_IA32_MC0_CTL 0x00000400
+#define MSR_IA32_MC0_STATUS 0x00000401
+#define MSR_IA32_MC0_ADDR 0x00000402
+#define MSR_IA32_MC0_MISC 0x00000403
+
+/* C-state Residency Counters */
+#define MSR_PKG_C3_RESIDENCY 0x000003f8
+#define MSR_PKG_C6_RESIDENCY 0x000003f9
+#define MSR_PKG_C7_RESIDENCY 0x000003fa
+#define MSR_CORE_C3_RESIDENCY 0x000003fc
+#define MSR_CORE_C6_RESIDENCY 0x000003fd
+#define MSR_CORE_C7_RESIDENCY 0x000003fe
+#define MSR_KNL_CORE_C6_RESIDENCY 0x000003ff
+#define MSR_PKG_C2_RESIDENCY 0x0000060d
+#define MSR_PKG_C8_RESIDENCY 0x00000630
+#define MSR_PKG_C9_RESIDENCY 0x00000631
+#define MSR_PKG_C10_RESIDENCY 0x00000632
+
+/* Interrupt Response Limit */
+#define MSR_PKGC3_IRTL 0x0000060a
+#define MSR_PKGC6_IRTL 0x0000060b
+#define MSR_PKGC7_IRTL 0x0000060c
+#define MSR_PKGC8_IRTL 0x00000633
+#define MSR_PKGC9_IRTL 0x00000634
+#define MSR_PKGC10_IRTL 0x00000635
+
+/* Run Time Average Power Limiting (RAPL) Interface */
+
+#define MSR_RAPL_POWER_UNIT 0x00000606
+
+#define MSR_PKG_POWER_LIMIT 0x00000610
+#define MSR_PKG_ENERGY_STATUS 0x00000611
+#define MSR_PKG_PERF_STATUS 0x00000613
+#define MSR_PKG_POWER_INFO 0x00000614
+
+#define MSR_DRAM_POWER_LIMIT 0x00000618
+#define MSR_DRAM_ENERGY_STATUS 0x00000619
+#define MSR_DRAM_PERF_STATUS 0x0000061b
+#define MSR_DRAM_POWER_INFO 0x0000061c
+
+#define MSR_PP0_POWER_LIMIT 0x00000638
+#define MSR_PP0_ENERGY_STATUS 0x00000639
+#define MSR_PP0_POLICY 0x0000063a
+#define MSR_PP0_PERF_STATUS 0x0000063b
+
+#define MSR_PP1_POWER_LIMIT 0x00000640
+#define MSR_PP1_ENERGY_STATUS 0x00000641
+#define MSR_PP1_POLICY 0x00000642
+
+/* Config TDP MSRs */
+#define MSR_CONFIG_TDP_NOMINAL 0x00000648
+#define MSR_CONFIG_TDP_LEVEL_1 0x00000649
+#define MSR_CONFIG_TDP_LEVEL_2 0x0000064A
+#define MSR_CONFIG_TDP_CONTROL 0x0000064B
+#define MSR_TURBO_ACTIVATION_RATIO 0x0000064C
+
+#define MSR_PLATFORM_ENERGY_STATUS 0x0000064D
+
+#define MSR_PKG_WEIGHTED_CORE_C0_RES 0x00000658
+#define MSR_PKG_ANY_CORE_C0_RES 0x00000659
+#define MSR_PKG_ANY_GFXE_C0_RES 0x0000065A
+#define MSR_PKG_BOTH_CORE_GFXE_C0_RES 0x0000065B
+
+#define MSR_CORE_C1_RES 0x00000660
+
+#define MSR_CC6_DEMOTION_POLICY_CONFIG 0x00000668
+#define MSR_MC6_DEMOTION_POLICY_CONFIG 0x00000669
+
+#define MSR_CORE_PERF_LIMIT_REASONS 0x00000690
+#define MSR_GFX_PERF_LIMIT_REASONS 0x000006B0
+#define MSR_RING_PERF_LIMIT_REASONS 0x000006B1
+
+/* Hardware P state interface */
+#define MSR_PPERF 0x0000064e
+#define MSR_PERF_LIMIT_REASONS 0x0000064f
+#define MSR_PM_ENABLE 0x00000770
+#define MSR_HWP_CAPABILITIES 0x00000771
+#define MSR_HWP_REQUEST_PKG 0x00000772
+#define MSR_HWP_INTERRUPT 0x00000773
+#define MSR_HWP_REQUEST 0x00000774
+#define MSR_HWP_STATUS 0x00000777
+
+/* CPUID.6.EAX */
+#define HWP_BASE_BIT (1<<7)
+#define HWP_NOTIFICATIONS_BIT (1<<8)
+#define HWP_ACTIVITY_WINDOW_BIT (1<<9)
+#define HWP_ENERGY_PERF_PREFERENCE_BIT (1<<10)
+#define HWP_PACKAGE_LEVEL_REQUEST_BIT (1<<11)
+
+/* IA32_HWP_CAPABILITIES */
+#define HWP_HIGHEST_PERF(x) (((x) >> 0) & 0xff)
+#define HWP_GUARANTEED_PERF(x) (((x) >> 8) & 0xff)
+#define HWP_MOSTEFFICIENT_PERF(x) (((x) >> 16) & 0xff)
+#define HWP_LOWEST_PERF(x) (((x) >> 24) & 0xff)
+
+/* IA32_HWP_REQUEST */
+#define HWP_MIN_PERF(x) (x & 0xff)
+#define HWP_MAX_PERF(x) ((x & 0xff) << 8)
+#define HWP_DESIRED_PERF(x) ((x & 0xff) << 16)
+#define HWP_ENERGY_PERF_PREFERENCE(x) ((x & 0xff) << 24)
+#define HWP_ACTIVITY_WINDOW(x) ((x & 0xff3) << 32)
+#define HWP_PACKAGE_CONTROL(x) ((x & 0x1) << 42)
+
+/* IA32_HWP_STATUS */
+#define HWP_GUARANTEED_CHANGE(x) (x & 0x1)
+#define HWP_EXCURSION_TO_MINIMUM(x) (x & 0x4)
+
+/* IA32_HWP_INTERRUPT */
+#define HWP_CHANGE_TO_GUARANTEED_INT(x) (x & 0x1)
+#define HWP_EXCURSION_TO_MINIMUM_INT(x) (x & 0x2)
+
+#define MSR_AMD64_MC0_MASK 0xc0010044
+
+#define MSR_IA32_MCx_CTL(x) (MSR_IA32_MC0_CTL + 4*(x))
+#define MSR_IA32_MCx_STATUS(x) (MSR_IA32_MC0_STATUS + 4*(x))
+#define MSR_IA32_MCx_ADDR(x) (MSR_IA32_MC0_ADDR + 4*(x))
+#define MSR_IA32_MCx_MISC(x) (MSR_IA32_MC0_MISC + 4*(x))
+
+#define MSR_AMD64_MCx_MASK(x) (MSR_AMD64_MC0_MASK + (x))
+
+/* These are consecutive and not in the normal 4er MCE bank block */
+#define MSR_IA32_MC0_CTL2 0x00000280
+#define MSR_IA32_MCx_CTL2(x) (MSR_IA32_MC0_CTL2 + (x))
+
+#define MSR_P6_PERFCTR0 0x000000c1
+#define MSR_P6_PERFCTR1 0x000000c2
+#define MSR_P6_EVNTSEL0 0x00000186
+#define MSR_P6_EVNTSEL1 0x00000187
+
+#define MSR_KNC_PERFCTR0 0x00000020
+#define MSR_KNC_PERFCTR1 0x00000021
+#define MSR_KNC_EVNTSEL0 0x00000028
+#define MSR_KNC_EVNTSEL1 0x00000029
+
+/* Alternative perfctr range with full access. */
+#define MSR_IA32_PMC0 0x000004c1
+
+/* AMD64 MSRs. Not complete. See the architecture manual for a more
+ complete list. */
+
+#define MSR_AMD64_PATCH_LEVEL 0x0000008b
+#define MSR_AMD64_TSC_RATIO 0xc0000104
+#define MSR_AMD64_NB_CFG 0xc001001f
+#define MSR_AMD64_PATCH_LOADER 0xc0010020
+#define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140
+#define MSR_AMD64_OSVW_STATUS 0xc0010141
+#define MSR_AMD64_LS_CFG 0xc0011020
+#define MSR_AMD64_DC_CFG 0xc0011022
+#define MSR_AMD64_BU_CFG2 0xc001102a
+#define MSR_AMD64_IBSFETCHCTL 0xc0011030
+#define MSR_AMD64_IBSFETCHLINAD 0xc0011031
+#define MSR_AMD64_IBSFETCHPHYSAD 0xc0011032
+#define MSR_AMD64_IBSFETCH_REG_COUNT 3
+#define MSR_AMD64_IBSFETCH_REG_MASK ((1UL<<MSR_AMD64_IBSFETCH_REG_COUNT)-1)
+#define MSR_AMD64_IBSOPCTL 0xc0011033
+#define MSR_AMD64_IBSOPRIP 0xc0011034
+#define MSR_AMD64_IBSOPDATA 0xc0011035
+#define MSR_AMD64_IBSOPDATA2 0xc0011036
+#define MSR_AMD64_IBSOPDATA3 0xc0011037
+#define MSR_AMD64_IBSDCLINAD 0xc0011038
+#define MSR_AMD64_IBSDCPHYSAD 0xc0011039
+#define MSR_AMD64_IBSOP_REG_COUNT 7
+#define MSR_AMD64_IBSOP_REG_MASK ((1UL<<MSR_AMD64_IBSOP_REG_COUNT)-1)
+#define MSR_AMD64_IBSCTL 0xc001103a
+#define MSR_AMD64_IBSBRTARGET 0xc001103b
+#define MSR_AMD64_IBSOPDATA4 0xc001103d
+#define MSR_AMD64_IBS_REG_COUNT_MAX 8 /* includes MSR_AMD64_IBSBRTARGET */
+
+/* Fam 17h MSRs */
+#define MSR_F17H_IRPERF 0xc00000e9
+
+/* Fam 16h MSRs */
+#define MSR_F16H_L2I_PERF_CTL 0xc0010230
+#define MSR_F16H_L2I_PERF_CTR 0xc0010231
+#define MSR_F16H_DR1_ADDR_MASK 0xc0011019
+#define MSR_F16H_DR2_ADDR_MASK 0xc001101a
+#define MSR_F16H_DR3_ADDR_MASK 0xc001101b
+#define MSR_F16H_DR0_ADDR_MASK 0xc0011027
+
+/* Fam 15h MSRs */
+#define MSR_F15H_PERF_CTL 0xc0010200
+#define MSR_F15H_PERF_CTR 0xc0010201
+#define MSR_F15H_NB_PERF_CTL 0xc0010240
+#define MSR_F15H_NB_PERF_CTR 0xc0010241
+#define MSR_F15H_PTSC 0xc0010280
+#define MSR_F15H_IC_CFG 0xc0011021
+
+/* Fam 10h MSRs */
+#define MSR_FAM10H_MMIO_CONF_BASE 0xc0010058
+#define FAM10H_MMIO_CONF_ENABLE (1<<0)
+#define FAM10H_MMIO_CONF_BUSRANGE_MASK 0xf
+#define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
+#define FAM10H_MMIO_CONF_BASE_MASK 0xfffffffULL
+#define FAM10H_MMIO_CONF_BASE_SHIFT 20
+#define MSR_FAM10H_NODE_ID 0xc001100c
+
+/* K8 MSRs */
+#define MSR_K8_TOP_MEM1 0xc001001a
+#define MSR_K8_TOP_MEM2 0xc001001d
+#define MSR_K8_SYSCFG 0xc0010010
+#define MSR_K8_INT_PENDING_MSG 0xc0010055
+/* C1E active bits in int pending message */
+#define K8_INTP_C1E_ACTIVE_MASK 0x18000000
+#define MSR_K8_TSEG_ADDR 0xc0010112
+#define MSR_K8_TSEG_MASK 0xc0010113
+#define K8_MTRRFIXRANGE_DRAM_ENABLE 0x00040000 /* MtrrFixDramEn bit */
+#define K8_MTRRFIXRANGE_DRAM_MODIFY 0x00080000 /* MtrrFixDramModEn bit */
+#define K8_MTRR_RDMEM_WRMEM_MASK 0x18181818 /* Mask: RdMem|WrMem */
+
+/* K7 MSRs */
+#define MSR_K7_EVNTSEL0 0xc0010000
+#define MSR_K7_PERFCTR0 0xc0010004
+#define MSR_K7_EVNTSEL1 0xc0010001
+#define MSR_K7_PERFCTR1 0xc0010005
+#define MSR_K7_EVNTSEL2 0xc0010002
+#define MSR_K7_PERFCTR2 0xc0010006
+#define MSR_K7_EVNTSEL3 0xc0010003
+#define MSR_K7_PERFCTR3 0xc0010007
+#define MSR_K7_CLK_CTL 0xc001001b
+#define MSR_K7_HWCR 0xc0010015
+#define MSR_K7_FID_VID_CTL 0xc0010041
+#define MSR_K7_FID_VID_STATUS 0xc0010042
+
+/* K6 MSRs */
+#define MSR_K6_WHCR 0xc0000082
+#define MSR_K6_UWCCR 0xc0000085
+#define MSR_K6_EPMR 0xc0000086
+#define MSR_K6_PSOR 0xc0000087
+#define MSR_K6_PFIR 0xc0000088
+
+/* Centaur-Hauls/IDT defined MSRs. */
+#define MSR_IDT_FCR1 0x00000107
+#define MSR_IDT_FCR2 0x00000108
+#define MSR_IDT_FCR3 0x00000109
+#define MSR_IDT_FCR4 0x0000010a
+
+#define MSR_IDT_MCR0 0x00000110
+#define MSR_IDT_MCR1 0x00000111
+#define MSR_IDT_MCR2 0x00000112
+#define MSR_IDT_MCR3 0x00000113
+#define MSR_IDT_MCR4 0x00000114
+#define MSR_IDT_MCR5 0x00000115
+#define MSR_IDT_MCR6 0x00000116
+#define MSR_IDT_MCR7 0x00000117
+#define MSR_IDT_MCR_CTRL 0x00000120
+
+/* VIA Cyrix defined MSRs*/
+#define MSR_VIA_FCR 0x00001107
+#define MSR_VIA_LONGHAUL 0x0000110a
+#define MSR_VIA_RNG 0x0000110b
+#define MSR_VIA_BCR2 0x00001147
+
+/* Transmeta defined MSRs */
+#define MSR_TMTA_LONGRUN_CTRL 0x80868010
+#define MSR_TMTA_LONGRUN_FLAGS 0x80868011
+#define MSR_TMTA_LRTI_READOUT 0x80868018
+#define MSR_TMTA_LRTI_VOLT_MHZ 0x8086801a
+
+/* Intel defined MSRs. */
+#define MSR_IA32_P5_MC_ADDR 0x00000000
+#define MSR_IA32_P5_MC_TYPE 0x00000001
+#define MSR_IA32_TSC 0x00000010
+#define MSR_IA32_PLATFORM_ID 0x00000017
+#define MSR_IA32_EBL_CR_POWERON 0x0000002a
+#define MSR_EBC_FREQUENCY_ID 0x0000002c
+#define MSR_SMI_COUNT 0x00000034
+#define MSR_IA32_FEATURE_CONTROL 0x0000003a
+#define MSR_IA32_TSC_ADJUST 0x0000003b
+#define MSR_IA32_BNDCFGS 0x00000d90
+
+#define MSR_IA32_XSS 0x00000da0
+
+#define FEATURE_CONTROL_LOCKED (1<<0)
+#define FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX (1<<1)
+#define FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX (1<<2)
+#define FEATURE_CONTROL_LMCE (1<<20)
+
+#define MSR_IA32_APICBASE 0x0000001b
+#define MSR_IA32_APICBASE_BSP (1<<8)
+#define MSR_IA32_APICBASE_ENABLE (1<<11)
+#define MSR_IA32_APICBASE_BASE (0xfffff<<12)
+
+#define MSR_IA32_TSCDEADLINE 0x000006e0
+
+#define MSR_IA32_UCODE_WRITE 0x00000079
+#define MSR_IA32_UCODE_REV 0x0000008b
+
+#define MSR_IA32_SMM_MONITOR_CTL 0x0000009b
+#define MSR_IA32_SMBASE 0x0000009e
+
+#define MSR_IA32_PERF_STATUS 0x00000198
+#define MSR_IA32_PERF_CTL 0x00000199
+#define INTEL_PERF_CTL_MASK 0xffff
+#define MSR_AMD_PSTATE_DEF_BASE 0xc0010064
+#define MSR_AMD_PERF_STATUS 0xc0010063
+#define MSR_AMD_PERF_CTL 0xc0010062
+
+#define MSR_IA32_MPERF 0x000000e7
+#define MSR_IA32_APERF 0x000000e8
+
+#define MSR_IA32_THERM_CONTROL 0x0000019a
+#define MSR_IA32_THERM_INTERRUPT 0x0000019b
+
+#define THERM_INT_HIGH_ENABLE (1 << 0)
+#define THERM_INT_LOW_ENABLE (1 << 1)
+#define THERM_INT_PLN_ENABLE (1 << 24)
+
+#define MSR_IA32_THERM_STATUS 0x0000019c
+
+#define THERM_STATUS_PROCHOT (1 << 0)
+#define THERM_STATUS_POWER_LIMIT (1 << 10)
+
+#define MSR_THERM2_CTL 0x0000019d
+
+#define MSR_THERM2_CTL_TM_SELECT (1ULL << 16)
+
+#define MSR_IA32_MISC_ENABLE 0x000001a0
+
+#define MSR_IA32_TEMPERATURE_TARGET 0x000001a2
+
+#define MSR_MISC_PWR_MGMT 0x000001aa
+
+#define MSR_IA32_ENERGY_PERF_BIAS 0x000001b0
+#define ENERGY_PERF_BIAS_PERFORMANCE 0
+#define ENERGY_PERF_BIAS_NORMAL 6
+#define ENERGY_PERF_BIAS_POWERSAVE 15
+
+#define MSR_IA32_PACKAGE_THERM_STATUS 0x000001b1
+
+#define PACKAGE_THERM_STATUS_PROCHOT (1 << 0)
+#define PACKAGE_THERM_STATUS_POWER_LIMIT (1 << 10)
+
+#define MSR_IA32_PACKAGE_THERM_INTERRUPT 0x000001b2
+
+#define PACKAGE_THERM_INT_HIGH_ENABLE (1 << 0)
+#define PACKAGE_THERM_INT_LOW_ENABLE (1 << 1)
+#define PACKAGE_THERM_INT_PLN_ENABLE (1 << 24)
+
+/* Thermal Thresholds Support */
+#define THERM_INT_THRESHOLD0_ENABLE (1 << 15)
+#define THERM_SHIFT_THRESHOLD0 8
+#define THERM_MASK_THRESHOLD0 (0x7f << THERM_SHIFT_THRESHOLD0)
+#define THERM_INT_THRESHOLD1_ENABLE (1 << 23)
+#define THERM_SHIFT_THRESHOLD1 16
+#define THERM_MASK_THRESHOLD1 (0x7f << THERM_SHIFT_THRESHOLD1)
+#define THERM_STATUS_THRESHOLD0 (1 << 6)
+#define THERM_LOG_THRESHOLD0 (1 << 7)
+#define THERM_STATUS_THRESHOLD1 (1 << 8)
+#define THERM_LOG_THRESHOLD1 (1 << 9)
+
+/* MISC_ENABLE bits: architectural */
+#define MSR_IA32_MISC_ENABLE_FAST_STRING_BIT 0
+#define MSR_IA32_MISC_ENABLE_FAST_STRING (1ULL << MSR_IA32_MISC_ENABLE_FAST_STRING_BIT)
+#define MSR_IA32_MISC_ENABLE_TCC_BIT 1
+#define MSR_IA32_MISC_ENABLE_TCC (1ULL << MSR_IA32_MISC_ENABLE_TCC_BIT)
+#define MSR_IA32_MISC_ENABLE_EMON_BIT 7
+#define MSR_IA32_MISC_ENABLE_EMON (1ULL << MSR_IA32_MISC_ENABLE_EMON_BIT)
+#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL_BIT 11
+#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL (1ULL << MSR_IA32_MISC_ENABLE_BTS_UNAVAIL_BIT)
+#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL_BIT 12
+#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL (1ULL << MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL_BIT)
+#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP_BIT 16
+#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP (1ULL << MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP_BIT)
+#define MSR_IA32_MISC_ENABLE_MWAIT_BIT 18
+#define MSR_IA32_MISC_ENABLE_MWAIT (1ULL << MSR_IA32_MISC_ENABLE_MWAIT_BIT)
+#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID_BIT 22
+#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID (1ULL << MSR_IA32_MISC_ENABLE_LIMIT_CPUID_BIT)
+#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE_BIT 23
+#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_XTPR_DISABLE_BIT)
+#define MSR_IA32_MISC_ENABLE_XD_DISABLE_BIT 34
+#define MSR_IA32_MISC_ENABLE_XD_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_XD_DISABLE_BIT)
+
+/* MISC_ENABLE bits: model-specific, meaning may vary from core to core */
+#define MSR_IA32_MISC_ENABLE_X87_COMPAT_BIT 2
+#define MSR_IA32_MISC_ENABLE_X87_COMPAT (1ULL << MSR_IA32_MISC_ENABLE_X87_COMPAT_BIT)
+#define MSR_IA32_MISC_ENABLE_TM1_BIT 3
+#define MSR_IA32_MISC_ENABLE_TM1 (1ULL << MSR_IA32_MISC_ENABLE_TM1_BIT)
+#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE_BIT 4
+#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE_BIT)
+#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE_BIT 6
+#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE_BIT)
+#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK_BIT 8
+#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK (1ULL << MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK_BIT)
+#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT 9
+#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT)
+#define MSR_IA32_MISC_ENABLE_FERR_BIT 10
+#define MSR_IA32_MISC_ENABLE_FERR (1ULL << MSR_IA32_MISC_ENABLE_FERR_BIT)
+#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX_BIT 10
+#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX (1ULL << MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX_BIT)
+#define MSR_IA32_MISC_ENABLE_TM2_BIT 13
+#define MSR_IA32_MISC_ENABLE_TM2 (1ULL << MSR_IA32_MISC_ENABLE_TM2_BIT)
+#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE_BIT 19
+#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE_BIT)
+#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK_BIT 20
+#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK (1ULL << MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK_BIT)
+#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT_BIT 24
+#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT (1ULL << MSR_IA32_MISC_ENABLE_L1D_CONTEXT_BIT)
+#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE_BIT 37
+#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE_BIT)
+#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE_BIT 38
+#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_TURBO_DISABLE_BIT)
+#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE_BIT 39
+#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE_BIT)
+
+#define MSR_IA32_TSC_DEADLINE 0x000006E0
+
+/* P4/Xeon+ specific */
+#define MSR_IA32_MCG_EAX 0x00000180
+#define MSR_IA32_MCG_EBX 0x00000181
+#define MSR_IA32_MCG_ECX 0x00000182
+#define MSR_IA32_MCG_EDX 0x00000183
+#define MSR_IA32_MCG_ESI 0x00000184
+#define MSR_IA32_MCG_EDI 0x00000185
+#define MSR_IA32_MCG_EBP 0x00000186
+#define MSR_IA32_MCG_ESP 0x00000187
+#define MSR_IA32_MCG_EFLAGS 0x00000188
+#define MSR_IA32_MCG_EIP 0x00000189
+#define MSR_IA32_MCG_RESERVED 0x0000018a
+
+/* Pentium IV performance counter MSRs */
+#define MSR_P4_BPU_PERFCTR0 0x00000300
+#define MSR_P4_BPU_PERFCTR1 0x00000301
+#define MSR_P4_BPU_PERFCTR2 0x00000302
+#define MSR_P4_BPU_PERFCTR3 0x00000303
+#define MSR_P4_MS_PERFCTR0 0x00000304
+#define MSR_P4_MS_PERFCTR1 0x00000305
+#define MSR_P4_MS_PERFCTR2 0x00000306
+#define MSR_P4_MS_PERFCTR3 0x00000307
+#define MSR_P4_FLAME_PERFCTR0 0x00000308
+#define MSR_P4_FLAME_PERFCTR1 0x00000309
+#define MSR_P4_FLAME_PERFCTR2 0x0000030a
+#define MSR_P4_FLAME_PERFCTR3 0x0000030b
+#define MSR_P4_IQ_PERFCTR0 0x0000030c
+#define MSR_P4_IQ_PERFCTR1 0x0000030d
+#define MSR_P4_IQ_PERFCTR2 0x0000030e
+#define MSR_P4_IQ_PERFCTR3 0x0000030f
+#define MSR_P4_IQ_PERFCTR4 0x00000310
+#define MSR_P4_IQ_PERFCTR5 0x00000311
+#define MSR_P4_BPU_CCCR0 0x00000360
+#define MSR_P4_BPU_CCCR1 0x00000361
+#define MSR_P4_BPU_CCCR2 0x00000362
+#define MSR_P4_BPU_CCCR3 0x00000363
+#define MSR_P4_MS_CCCR0 0x00000364
+#define MSR_P4_MS_CCCR1 0x00000365
+#define MSR_P4_MS_CCCR2 0x00000366
+#define MSR_P4_MS_CCCR3 0x00000367
+#define MSR_P4_FLAME_CCCR0 0x00000368
+#define MSR_P4_FLAME_CCCR1 0x00000369
+#define MSR_P4_FLAME_CCCR2 0x0000036a
+#define MSR_P4_FLAME_CCCR3 0x0000036b
+#define MSR_P4_IQ_CCCR0 0x0000036c
+#define MSR_P4_IQ_CCCR1 0x0000036d
+#define MSR_P4_IQ_CCCR2 0x0000036e
+#define MSR_P4_IQ_CCCR3 0x0000036f
+#define MSR_P4_IQ_CCCR4 0x00000370
+#define MSR_P4_IQ_CCCR5 0x00000371
+#define MSR_P4_ALF_ESCR0 0x000003ca
+#define MSR_P4_ALF_ESCR1 0x000003cb
+#define MSR_P4_BPU_ESCR0 0x000003b2
+#define MSR_P4_BPU_ESCR1 0x000003b3
+#define MSR_P4_BSU_ESCR0 0x000003a0
+#define MSR_P4_BSU_ESCR1 0x000003a1
+#define MSR_P4_CRU_ESCR0 0x000003b8
+#define MSR_P4_CRU_ESCR1 0x000003b9
+#define MSR_P4_CRU_ESCR2 0x000003cc
+#define MSR_P4_CRU_ESCR3 0x000003cd
+#define MSR_P4_CRU_ESCR4 0x000003e0
+#define MSR_P4_CRU_ESCR5 0x000003e1
+#define MSR_P4_DAC_ESCR0 0x000003a8
+#define MSR_P4_DAC_ESCR1 0x000003a9
+#define MSR_P4_FIRM_ESCR0 0x000003a4
+#define MSR_P4_FIRM_ESCR1 0x000003a5
+#define MSR_P4_FLAME_ESCR0 0x000003a6
+#define MSR_P4_FLAME_ESCR1 0x000003a7
+#define MSR_P4_FSB_ESCR0 0x000003a2
+#define MSR_P4_FSB_ESCR1 0x000003a3
+#define MSR_P4_IQ_ESCR0 0x000003ba
+#define MSR_P4_IQ_ESCR1 0x000003bb
+#define MSR_P4_IS_ESCR0 0x000003b4
+#define MSR_P4_IS_ESCR1 0x000003b5
+#define MSR_P4_ITLB_ESCR0 0x000003b6
+#define MSR_P4_ITLB_ESCR1 0x000003b7
+#define MSR_P4_IX_ESCR0 0x000003c8
+#define MSR_P4_IX_ESCR1 0x000003c9
+#define MSR_P4_MOB_ESCR0 0x000003aa
+#define MSR_P4_MOB_ESCR1 0x000003ab
+#define MSR_P4_MS_ESCR0 0x000003c0
+#define MSR_P4_MS_ESCR1 0x000003c1
+#define MSR_P4_PMH_ESCR0 0x000003ac
+#define MSR_P4_PMH_ESCR1 0x000003ad
+#define MSR_P4_RAT_ESCR0 0x000003bc
+#define MSR_P4_RAT_ESCR1 0x000003bd
+#define MSR_P4_SAAT_ESCR0 0x000003ae
+#define MSR_P4_SAAT_ESCR1 0x000003af
+#define MSR_P4_SSU_ESCR0 0x000003be
+#define MSR_P4_SSU_ESCR1 0x000003bf /* guess: not in manual */
+
+#define MSR_P4_TBPU_ESCR0 0x000003c2
+#define MSR_P4_TBPU_ESCR1 0x000003c3
+#define MSR_P4_TC_ESCR0 0x000003c4
+#define MSR_P4_TC_ESCR1 0x000003c5
+#define MSR_P4_U2L_ESCR0 0x000003b0
+#define MSR_P4_U2L_ESCR1 0x000003b1
+
+#define MSR_P4_PEBS_MATRIX_VERT 0x000003f2
+
+/* Intel Core-based CPU performance counters */
+#define MSR_CORE_PERF_FIXED_CTR0 0x00000309
+#define MSR_CORE_PERF_FIXED_CTR1 0x0000030a
+#define MSR_CORE_PERF_FIXED_CTR2 0x0000030b
+#define MSR_CORE_PERF_FIXED_CTR_CTRL 0x0000038d
+#define MSR_CORE_PERF_GLOBAL_STATUS 0x0000038e
+#define MSR_CORE_PERF_GLOBAL_CTRL 0x0000038f
+#define MSR_CORE_PERF_GLOBAL_OVF_CTRL 0x00000390
+
+/* Geode defined MSRs */
+#define MSR_GEODE_BUSCONT_CONF0 0x00001900
+
+/* Intel VT MSRs */
+#define MSR_IA32_VMX_BASIC 0x00000480
+#define MSR_IA32_VMX_PINBASED_CTLS 0x00000481
+#define MSR_IA32_VMX_PROCBASED_CTLS 0x00000482
+#define MSR_IA32_VMX_EXIT_CTLS 0x00000483
+#define MSR_IA32_VMX_ENTRY_CTLS 0x00000484
+#define MSR_IA32_VMX_MISC 0x00000485
+#define MSR_IA32_VMX_CR0_FIXED0 0x00000486
+#define MSR_IA32_VMX_CR0_FIXED1 0x00000487
+#define MSR_IA32_VMX_CR4_FIXED0 0x00000488
+#define MSR_IA32_VMX_CR4_FIXED1 0x00000489
+#define MSR_IA32_VMX_VMCS_ENUM 0x0000048a
+#define MSR_IA32_VMX_PROCBASED_CTLS2 0x0000048b
+#define MSR_IA32_VMX_EPT_VPID_CAP 0x0000048c
+#define MSR_IA32_VMX_TRUE_PINBASED_CTLS 0x0000048d
+#define MSR_IA32_VMX_TRUE_PROCBASED_CTLS 0x0000048e
+#define MSR_IA32_VMX_TRUE_EXIT_CTLS 0x0000048f
+#define MSR_IA32_VMX_TRUE_ENTRY_CTLS 0x00000490
+#define MSR_IA32_VMX_VMFUNC 0x00000491
+
+/* VMX_BASIC bits and bitmasks */
+#define VMX_BASIC_VMCS_SIZE_SHIFT 32
+#define VMX_BASIC_TRUE_CTLS (1ULL << 55)
+#define VMX_BASIC_64 0x0001000000000000LLU
+#define VMX_BASIC_MEM_TYPE_SHIFT 50
+#define VMX_BASIC_MEM_TYPE_MASK 0x003c000000000000LLU
+#define VMX_BASIC_MEM_TYPE_WB 6LLU
+#define VMX_BASIC_INOUT 0x0040000000000000LLU
+
+/* MSR_IA32_VMX_MISC bits */
+#define MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS (1ULL << 29)
+#define MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE 0x1F
+/* AMD-V MSRs */
+
+#define MSR_VM_CR 0xc0010114
+#define MSR_VM_IGNNE 0xc0010115
+#define MSR_VM_HSAVE_PA 0xc0010117
+
+#endif /* _UAPI_ASM_X86_MSR_INDEX_H */
--
2.8.1
^ permalink raw reply related
* [PATCH v2 5/7] Makefile.headersinst: cleanup input files
From: Nicolas Dichtel @ 2017-01-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483695839-18660-1-git-send-email-nicolas.dichtel@6wind.com>
After the last four patches, all exported headers are under uapi/, thus
input-files2 are not needed anymore.
The side effect is that input-files1-name is exactly header-y.
Note also that unput-files3-name is genhdr-y.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---
| 34 +++++++++++-----------------------
1 file changed, 11 insertions(+), 23 deletions(-)
--git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 1106d6ca3a38..3e20d03432d2 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -40,31 +40,20 @@ wrapper-files := $(filter $(header-y), $(generic-y))
srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
-oldsrcdir := $(srctree)/$(subst /uapi,,$(obj))
-
# all headers files for this dir
header-y := $(filter-out $(generic-y), $(header-y))
all-files := $(header-y) $(genhdr-y) $(wrapper-files)
output-files := $(addprefix $(installdir)/, $(all-files))
-input-files1 := $(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)), \
- $(wildcard $(srcdir)/$(hdr))) \
- )
-input-files1-name := $(notdir $(input-files1))
-input-files2 := $(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)),, \
- $(if $(wildcard $(oldsrcdir)/$(hdr)), \
- $(wildcard $(oldsrcdir)/$(hdr)), \
- $(error Missing UAPI file $(srcdir)/$(hdr))) \
- ))
-input-files2-name := $(notdir $(input-files2))
-input-files3 := $(foreach hdr, $(genhdr-y), \
- $(if $(wildcard $(gendir)/$(hdr)), \
- $(wildcard $(gendir)/$(hdr)), \
- $(error Missing generated UAPI file $(gendir)/$(hdr)) \
- ))
-input-files3-name := $(notdir $(input-files3))
+# Check that all expected files exist
+$(foreach hdr, $(header-y), \
+ $(if $(wildcard $(srcdir)/$(hdr)),, \
+ $(error Missing UAPI file $(srcdir)/$(hdr)) \
+ ))
+$(foreach hdr, $(genhdr-y), \
+ $(if $(wildcard $(gendir)/$(hdr)),, \
+ $(error Missing generated UAPI file $(gendir)/$(hdr)) \
+ ))
# Work out what needs to be removed
oldheaders := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
@@ -78,9 +67,8 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
cmd_install = \
- $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(input-files1-name); \
- $(CONFIG_SHELL) $< $(installdir) $(oldsrcdir) $(input-files2-name); \
- $(CONFIG_SHELL) $< $(installdir) $(gendir) $(input-files3-name); \
+ $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-y); \
+ $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-y); \
for F in $(wrapper-files); do \
echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
done; \
--
2.8.1
^ permalink raw reply related
* [PATCH v2 6/7] Makefile.headersinst: remove destination-y option
From: Nicolas Dichtel @ 2017-01-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483695839-18660-1-git-send-email-nicolas.dichtel@6wind.com>
This option was added in commit c7bb349e7c25 ("kbuild: introduce destination-y
for exported headers") but never used in-tree.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---
Documentation/kbuild/makefiles.txt | 23 ++++-------------------
| 2 +-
2 files changed, 5 insertions(+), 20 deletions(-)
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 9b9c4797fc55..37b525d329ae 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -46,9 +46,8 @@ This document describes the Linux kernel Makefiles.
=== 7 Kbuild syntax for exported headers
--- 7.1 header-y
--- 7.2 genhdr-y
- --- 7.3 destination-y
- --- 7.4 generic-y
- --- 7.5 generated-y
+ --- 7.3 generic-y
+ --- 7.4 generated-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1295,21 +1294,7 @@ See subsequent chapter for the syntax of the Kbuild file.
#include/linux/Kbuild
genhdr-y += version.h
- --- 7.3 destination-y
-
- When an architecture has a set of exported headers that needs to be
- exported to a different directory destination-y is used.
- destination-y specifies the destination directory for all exported
- headers in the file where it is present.
-
- Example:
- #arch/xtensa/platforms/s6105/include/platform/Kbuild
- destination-y := include/linux
-
- In the example above all exported headers in the Kbuild file
- will be located in the directory "include/linux" when exported.
-
- --- 7.4 generic-y
+ --- 7.3 generic-y
If an architecture uses a verbatim copy of a header from
include/asm-generic then this is listed in the file
@@ -1336,7 +1321,7 @@ See subsequent chapter for the syntax of the Kbuild file.
Example: termios.h
#include <asm-generic/termios.h>
- --- 7.5 generated-y
+ --- 7.4 generated-y
If an architecture generates other header files alongside generic-y
wrappers, and not included in genhdr-y, then generated-y specifies
--git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 3e20d03432d2..876b42cfede4 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -14,7 +14,7 @@ kbuild-file := $(srctree)/$(obj)/Kbuild
include $(kbuild-file)
# called may set destination dir (when installing to asm/)
-_dst := $(if $(destination-y),$(destination-y),$(if $(dst),$(dst),$(obj)))
+_dst := $(if $(dst),$(dst),$(obj))
old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
ifneq ($(wildcard $(old-kbuild-file)),)
--
2.8.1
^ permalink raw reply related
* [PATCH v2 7/7] uapi: export all headers under uapi directories
From: Nicolas Dichtel @ 2017-01-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483695839-18660-1-git-send-email-nicolas.dichtel@6wind.com>
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.
In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.
After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-hexagon/shmparam.h
asm-mips/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
drm/vgem_drm.h
drm/armada_drm.h
drm/omap_drm.h
drm/etnaviv_drm.h
asm-tile/shmparam.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-powerpc/perf_regs.h
rdma/qedr-abi.h
asm-parisc/kvm_para.h
asm-openrisc/shmparam.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-xtensa/kvm_para.h
asm-avr32/kvm_para.h
asm-m32r/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
linux/bcache.h
linux/kvm.h
linux/kvm_para.h
linux/kfd_ioctl.h
linux/cryptouser.h
linux/kcm.h
linux/kcov.h
linux/seg6_iptunnel.h
linux/stm.h
linux/genwqe
linux/genwqe/.install
linux/genwqe/genwqe_card.h
linux/genwqe/..install.cmd
linux/seg6.h
linux/cifs
linux/cifs/.install
linux/cifs/cifs_mount.h
linux/cifs/..install.cmd
linux/auto_dev-ioctl.h
Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---
Documentation/kbuild/makefiles.txt | 41 ++-
arch/alpha/include/uapi/asm/Kbuild | 41 ---
arch/arc/include/uapi/asm/Kbuild | 3 -
arch/arm/include/uapi/asm/Kbuild | 17 -
arch/arm64/include/uapi/asm/Kbuild | 18 --
arch/avr32/include/uapi/asm/Kbuild | 20 --
arch/blackfin/include/uapi/asm/Kbuild | 17 -
arch/c6x/include/uapi/asm/Kbuild | 8 -
arch/cris/include/uapi/arch-v10/arch/Kbuild | 5 -
arch/cris/include/uapi/arch-v32/arch/Kbuild | 3 -
arch/cris/include/uapi/asm/Kbuild | 43 +--
arch/frv/include/uapi/asm/Kbuild | 33 --
arch/h8300/include/uapi/asm/Kbuild | 28 --
arch/hexagon/include/asm/Kbuild | 3 -
arch/hexagon/include/uapi/asm/Kbuild | 13 -
arch/ia64/include/uapi/asm/Kbuild | 45 ---
arch/m32r/include/uapi/asm/Kbuild | 31 --
arch/m68k/include/uapi/asm/Kbuild | 24 --
arch/metag/include/uapi/asm/Kbuild | 8 -
arch/microblaze/include/uapi/asm/Kbuild | 32 --
arch/mips/include/uapi/asm/Kbuild | 37 ---
arch/mn10300/include/uapi/asm/Kbuild | 32 --
arch/nios2/include/uapi/asm/Kbuild | 4 +-
arch/openrisc/include/asm/Kbuild | 3 -
arch/openrisc/include/uapi/asm/Kbuild | 8 -
arch/parisc/include/uapi/asm/Kbuild | 28 --
arch/powerpc/include/uapi/asm/Kbuild | 45 ---
arch/s390/include/uapi/asm/Kbuild | 52 ---
arch/score/include/asm/Kbuild | 4 -
arch/score/include/uapi/asm/Kbuild | 32 --
arch/sh/include/uapi/asm/Kbuild | 23 --
arch/sparc/include/uapi/asm/Kbuild | 48 ---
arch/tile/include/asm/Kbuild | 3 -
arch/tile/include/uapi/arch/Kbuild | 17 -
arch/tile/include/uapi/asm/Kbuild | 19 +-
arch/unicore32/include/uapi/asm/Kbuild | 6 -
arch/x86/include/uapi/asm/Kbuild | 59 ----
arch/xtensa/include/uapi/asm/Kbuild | 23 --
include/Kbuild | 2 -
include/asm-generic/Kbuild.asm | 1 -
include/scsi/fc/Kbuild | 0
include/uapi/Kbuild | 15 -
include/uapi/asm-generic/Kbuild | 36 ---
include/uapi/asm-generic/Kbuild.asm | 62 ++--
include/uapi/drm/Kbuild | 22 --
include/uapi/linux/Kbuild | 482 ----------------------------
include/uapi/linux/android/Kbuild | 2 -
include/uapi/linux/byteorder/Kbuild | 3 -
include/uapi/linux/caif/Kbuild | 3 -
include/uapi/linux/can/Kbuild | 6 -
include/uapi/linux/dvb/Kbuild | 9 -
include/uapi/linux/hdlc/Kbuild | 2 -
include/uapi/linux/hsi/Kbuild | 2 -
include/uapi/linux/iio/Kbuild | 3 -
include/uapi/linux/isdn/Kbuild | 2 -
include/uapi/linux/mmc/Kbuild | 2 -
include/uapi/linux/netfilter/Kbuild | 89 -----
include/uapi/linux/netfilter/ipset/Kbuild | 5 -
include/uapi/linux/netfilter_arp/Kbuild | 3 -
include/uapi/linux/netfilter_bridge/Kbuild | 18 --
include/uapi/linux/netfilter_ipv4/Kbuild | 10 -
include/uapi/linux/netfilter_ipv6/Kbuild | 13 -
include/uapi/linux/nfsd/Kbuild | 6 -
include/uapi/linux/raid/Kbuild | 3 -
include/uapi/linux/spi/Kbuild | 2 -
include/uapi/linux/sunrpc/Kbuild | 2 -
include/uapi/linux/tc_act/Kbuild | 15 -
include/uapi/linux/tc_ematch/Kbuild | 5 -
include/uapi/linux/usb/Kbuild | 12 -
include/uapi/linux/wimax/Kbuild | 2 -
include/uapi/misc/Kbuild | 2 -
include/uapi/mtd/Kbuild | 6 -
include/uapi/rdma/Kbuild | 18 --
include/uapi/rdma/hfi/Kbuild | 2 -
include/uapi/scsi/Kbuild | 6 -
include/uapi/scsi/fc/Kbuild | 5 -
include/uapi/sound/Kbuild | 16 -
include/uapi/video/Kbuild | 4 -
include/uapi/xen/Kbuild | 5 -
include/video/Kbuild | 0
| 39 +--
81 files changed, 73 insertions(+), 1745 deletions(-)
delete mode 100644 arch/cris/include/uapi/arch-v10/arch/Kbuild
delete mode 100644 arch/cris/include/uapi/arch-v32/arch/Kbuild
delete mode 100644 arch/tile/include/uapi/arch/Kbuild
delete mode 100644 include/Kbuild
delete mode 100644 include/asm-generic/Kbuild.asm
delete mode 100644 include/scsi/fc/Kbuild
delete mode 100644 include/uapi/Kbuild
delete mode 100644 include/uapi/asm-generic/Kbuild
delete mode 100644 include/uapi/drm/Kbuild
delete mode 100644 include/uapi/linux/Kbuild
delete mode 100644 include/uapi/linux/android/Kbuild
delete mode 100644 include/uapi/linux/byteorder/Kbuild
delete mode 100644 include/uapi/linux/caif/Kbuild
delete mode 100644 include/uapi/linux/can/Kbuild
delete mode 100644 include/uapi/linux/dvb/Kbuild
delete mode 100644 include/uapi/linux/hdlc/Kbuild
delete mode 100644 include/uapi/linux/hsi/Kbuild
delete mode 100644 include/uapi/linux/iio/Kbuild
delete mode 100644 include/uapi/linux/isdn/Kbuild
delete mode 100644 include/uapi/linux/mmc/Kbuild
delete mode 100644 include/uapi/linux/netfilter/Kbuild
delete mode 100644 include/uapi/linux/netfilter/ipset/Kbuild
delete mode 100644 include/uapi/linux/netfilter_arp/Kbuild
delete mode 100644 include/uapi/linux/netfilter_bridge/Kbuild
delete mode 100644 include/uapi/linux/netfilter_ipv4/Kbuild
delete mode 100644 include/uapi/linux/netfilter_ipv6/Kbuild
delete mode 100644 include/uapi/linux/nfsd/Kbuild
delete mode 100644 include/uapi/linux/raid/Kbuild
delete mode 100644 include/uapi/linux/spi/Kbuild
delete mode 100644 include/uapi/linux/sunrpc/Kbuild
delete mode 100644 include/uapi/linux/tc_act/Kbuild
delete mode 100644 include/uapi/linux/tc_ematch/Kbuild
delete mode 100644 include/uapi/linux/usb/Kbuild
delete mode 100644 include/uapi/linux/wimax/Kbuild
delete mode 100644 include/uapi/misc/Kbuild
delete mode 100644 include/uapi/mtd/Kbuild
delete mode 100644 include/uapi/rdma/Kbuild
delete mode 100644 include/uapi/rdma/hfi/Kbuild
delete mode 100644 include/uapi/scsi/Kbuild
delete mode 100644 include/uapi/scsi/fc/Kbuild
delete mode 100644 include/uapi/sound/Kbuild
delete mode 100644 include/uapi/video/Kbuild
delete mode 100644 include/uapi/xen/Kbuild
delete mode 100644 include/video/Kbuild
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 37b525d329ae..53e31061ff18 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -44,7 +44,7 @@ This document describes the Linux kernel Makefiles.
--- 6.11 Post-link pass
=== 7 Kbuild syntax for exported headers
- --- 7.1 header-y
+ --- 7.1 subdir-y
--- 7.2 genhdr-y
--- 7.3 generic-y
--- 7.4 generated-y
@@ -1235,7 +1235,7 @@ When kbuild executes, the following steps are followed (roughly):
that may be shared between individual architectures.
The recommended approach how to use a generic header file is
to list the file in the Kbuild file.
- See "7.4 generic-y" for further info on syntax etc.
+ See "7.3 generic-y" for further info on syntax etc.
--- 6.11 Post-link pass
@@ -1262,37 +1262,36 @@ The pre-processing does:
- drop include of compiler.h
- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
-Each relevant directory contains a file name "Kbuild" which specifies the
-headers to be exported.
+All headers under include/uapi/, include/generated/uapi/,
+arch/<arch>/include/uapi/asm/ and arch/<arch>/include/generated/uapi/asm/
+are exported.
+
+A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
+arch/<arch>/include/asm/ to list asm files coming from asm-generic.
See subsequent chapter for the syntax of the Kbuild file.
- --- 7.1 header-y
+ --- 7.1 subdir-y
- header-y specifies header files to be exported.
+ subdir-y may be used to specify a subdirectory to be exported.
Example:
- #include/linux/Kbuild
- header-y += usb/
- header-y += aio_abi.h
+ #arch/cris/include/uapi/asm/Kbuild
+ subdir-y += ../arch-v10/arch/
+ subdir-y += ../arch-v32/arch/
- The convention is to list one file per line and
+ The convention is to list one subdir per line and
preferably in alphabetic order.
- header-y also specifies which subdirectories to visit.
- A subdirectory is identified by a trailing '/' which
- can be seen in the example above for the usb subdirectory.
-
- Subdirectories are visited before their parent directories.
-
--- 7.2 genhdr-y
- genhdr-y specifies generated files to be exported.
- Generated files are special as they need to be looked
- up in another directory when doing 'make O=...' builds.
+ genhdr-y specifies asm files to be generated.
Example:
- #include/linux/Kbuild
- genhdr-y += version.h
+ #arch/x86/include/uapi/asm/Kbuild
+ genhdr-y += unistd_32.h
+ genhdr-y += unistd_64.h
+ genhdr-y += unistd_x32.h
+
--- 7.3 generic-y
diff --git a/arch/alpha/include/uapi/asm/Kbuild b/arch/alpha/include/uapi/asm/Kbuild
index d96f2ef5b639..b15bf6bc0e94 100644
--- a/arch/alpha/include/uapi/asm/Kbuild
+++ b/arch/alpha/include/uapi/asm/Kbuild
@@ -1,43 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += a.out.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += compiler.h
-header-y += console.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += fpu.h
-header-y += gentrap.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += pal.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += reg.h
-header-y += regdef.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sysinfo.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
index f50d02df78d5..b15bf6bc0e94 100644
--- a/arch/arc/include/uapi/asm/Kbuild
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -1,5 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += elf.h
-header-y += page.h
-header-y += cachectl.h
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index 46a76cd6acb6..607f702c2d62 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -1,23 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += fcntl.h
-header-y += hwcap.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += perf_regs.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += unistd.h
genhdr-y += unistd-common.h
genhdr-y += unistd-oabi.h
genhdr-y += unistd-eabi.h
diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild
index 825b0fe51c2b..13a97aa2285f 100644
--- a/arch/arm64/include/uapi/asm/Kbuild
+++ b/arch/arm64/include/uapi/asm/Kbuild
@@ -2,21 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += fcntl.h
-header-y += hwcap.h
-header-y += kvm_para.h
-header-y += perf_regs.h
-header-y += param.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += statfs.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild
index 08d8a3d76ea8..610395083364 100644
--- a/arch/avr32/include/uapi/asm/Kbuild
+++ b/arch/avr32/include/uapi/asm/Kbuild
@@ -1,26 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
generic-y += bitsperlong.h
generic-y += errno.h
generic-y += fcntl.h
diff --git a/arch/blackfin/include/uapi/asm/Kbuild b/arch/blackfin/include/uapi/asm/Kbuild
index 0bd28f77abc3..b15bf6bc0e94 100644
--- a/arch/blackfin/include/uapi/asm/Kbuild
+++ b/arch/blackfin/include/uapi/asm/Kbuild
@@ -1,19 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += bfin_sport.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += fcntl.h
-header-y += fixed_code.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild
index e9bc2b2b8147..13a97aa2285f 100644
--- a/arch/c6x/include/uapi/asm/Kbuild
+++ b/arch/c6x/include/uapi/asm/Kbuild
@@ -2,11 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/cris/include/uapi/arch-v10/arch/Kbuild b/arch/cris/include/uapi/arch-v10/arch/Kbuild
deleted file mode 100644
index 9048c87a782b..000000000000
--- a/arch/cris/include/uapi/arch-v10/arch/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += sv_addr.agh
-header-y += sv_addr_ag.h
-header-y += svinto.h
-header-y += user.h
diff --git a/arch/cris/include/uapi/arch-v32/arch/Kbuild b/arch/cris/include/uapi/arch-v32/arch/Kbuild
deleted file mode 100644
index 59efffd16b61..000000000000
--- a/arch/cris/include/uapi/arch-v32/arch/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += cryptocop.h
-header-y += user.h
diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
index d5564a0ae66a..d0c5471856e0 100644
--- a/arch/cris/include/uapi/asm/Kbuild
+++ b/arch/cris/include/uapi/asm/Kbuild
@@ -1,44 +1,5 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += ../arch-v10/arch/
-header-y += ../arch-v32/arch/
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += elf.h
-header-y += elf_v10.h
-header-y += elf_v32.h
-header-y += errno.h
-header-y += ethernet.h
-header-y += etraxgpio.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += ptrace_v10.h
-header-y += ptrace_v32.h
-header-y += resource.h
-header-y += rs485.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sync_serial.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
+subdir-y += ../arch-v10/arch/
+subdir-y += ../arch-v32/arch/
diff --git a/arch/frv/include/uapi/asm/Kbuild b/arch/frv/include/uapi/asm/Kbuild
index 42a2b33461c0..b15bf6bc0e94 100644
--- a/arch/frv/include/uapi/asm/Kbuild
+++ b/arch/frv/include/uapi/asm/Kbuild
@@ -1,35 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += registers.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
index fb6101a5d4f1..b15bf6bc0e94 100644
--- a/arch/h8300/include/uapi/asm/Kbuild
+++ b/arch/h8300/include/uapi/asm/Kbuild
@@ -1,30 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += siginfo.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index db8ddabc6bd2..f3b1ceb5c1e4 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ucontext.h
-
generic-y += auxvec.h
generic-y += barrier.h
generic-y += bug.h
diff --git a/arch/hexagon/include/uapi/asm/Kbuild b/arch/hexagon/include/uapi/asm/Kbuild
index c31706c38631..b15bf6bc0e94 100644
--- a/arch/hexagon/include/uapi/asm/Kbuild
+++ b/arch/hexagon/include/uapi/asm/Kbuild
@@ -1,15 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += param.h
-header-y += ptrace.h
-header-y += registers.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += swab.h
-header-y += unistd.h
-header-y += user.h
diff --git a/arch/ia64/include/uapi/asm/Kbuild b/arch/ia64/include/uapi/asm/Kbuild
index 891002bbb995..13a97aa2285f 100644
--- a/arch/ia64/include/uapi/asm/Kbuild
+++ b/arch/ia64/include/uapi/asm/Kbuild
@@ -2,48 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += break.h
-header-y += byteorder.h
-header-y += cmpxchg.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += fpu.h
-header-y += gcc_intrin.h
-header-y += ia64regs.h
-header-y += intel_intrin.h
-header-y += intrinsics.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += perfmon.h
-header-y += perfmon_default_smpl.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += ptrace_offsets.h
-header-y += resource.h
-header-y += rse.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += ustack.h
diff --git a/arch/m32r/include/uapi/asm/Kbuild b/arch/m32r/include/uapi/asm/Kbuild
index 43937a61d6cf..b15bf6bc0e94 100644
--- a/arch/m32r/include/uapi/asm/Kbuild
+++ b/arch/m32r/include/uapi/asm/Kbuild
@@ -1,33 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild
index 6a2d257bdfb2..64368077235a 100644
--- a/arch/m68k/include/uapi/asm/Kbuild
+++ b/arch/m68k/include/uapi/asm/Kbuild
@@ -9,27 +9,3 @@ generic-y += socket.h
generic-y += sockios.h
generic-y += termbits.h
generic-y += termios.h
-
-header-y += a.out.h
-header-y += bootinfo.h
-header-y += bootinfo-amiga.h
-header-y += bootinfo-apollo.h
-header-y += bootinfo-atari.h
-header-y += bootinfo-hp300.h
-header-y += bootinfo-mac.h
-header-y += bootinfo-q40.h
-header-y += bootinfo-vme.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += fcntl.h
-header-y += ioctls.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/metag/include/uapi/asm/Kbuild b/arch/metag/include/uapi/asm/Kbuild
index ab78be2b6eb0..b29731ebd7a9 100644
--- a/arch/metag/include/uapi/asm/Kbuild
+++ b/arch/metag/include/uapi/asm/Kbuild
@@ -1,14 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += byteorder.h
-header-y += ech.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += swab.h
-header-y += unistd.h
-
generic-y += mman.h
generic-y += resource.h
generic-y += setup.h
diff --git a/arch/microblaze/include/uapi/asm/Kbuild b/arch/microblaze/include/uapi/asm/Kbuild
index 1aac99f87df1..2178c78c7c1a 100644
--- a/arch/microblaze/include/uapi/asm/Kbuild
+++ b/arch/microblaze/include/uapi/asm/Kbuild
@@ -2,35 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += types.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += elf.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += unistd.h
diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild
index f2cf41461146..a0266feba9e6 100644
--- a/arch/mips/include/uapi/asm/Kbuild
+++ b/arch/mips/include/uapi/asm/Kbuild
@@ -2,40 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += ipcbuf.h
-
-header-y += auxvec.h
-header-y += bitfield.h
-header-y += bitsperlong.h
-header-y += break.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += inst.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += sgidefs.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sysmips.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/mn10300/include/uapi/asm/Kbuild b/arch/mn10300/include/uapi/asm/Kbuild
index 040178cdb3eb..b15bf6bc0e94 100644
--- a/arch/mn10300/include/uapi/asm/Kbuild
+++ b/arch/mn10300/include/uapi/asm/Kbuild
@@ -1,34 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/nios2/include/uapi/asm/Kbuild b/arch/nios2/include/uapi/asm/Kbuild
index e0bb972a50d7..766455d0d291 100644
--- a/arch/nios2/include/uapi/asm/Kbuild
+++ b/arch/nios2/include/uapi/asm/Kbuild
@@ -1,5 +1,3 @@
+# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += elf.h
-
generic-y += ucontext.h
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index 2832f031fb11..561915716fd9 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ucontext.h
-
generic-y += atomic.h
generic-y += auxvec.h
generic-y += barrier.h
diff --git a/arch/openrisc/include/uapi/asm/Kbuild b/arch/openrisc/include/uapi/asm/Kbuild
index 80761eb82b5f..b15bf6bc0e94 100644
--- a/arch/openrisc/include/uapi/asm/Kbuild
+++ b/arch/openrisc/include/uapi/asm/Kbuild
@@ -1,10 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += byteorder.h
-header-y += elf.h
-header-y += kvm_para.h
-header-y += param.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += unistd.h
diff --git a/arch/parisc/include/uapi/asm/Kbuild b/arch/parisc/include/uapi/asm/Kbuild
index 348356c99514..3971c60a7e7f 100644
--- a/arch/parisc/include/uapi/asm/Kbuild
+++ b/arch/parisc/include/uapi/asm/Kbuild
@@ -2,31 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += resource.h
-
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += pdc.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
index dab3717e3ea0..b15bf6bc0e94 100644
--- a/arch/powerpc/include/uapi/asm/Kbuild
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -1,47 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += bootx.h
-header-y += byteorder.h
-header-y += cputable.h
-header-y += eeh.h
-header-y += elf.h
-header-y += epapr_hcalls.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += nvram.h
-header-y += opal-prd.h
-header-y += param.h
-header-y += perf_event.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ps3fb.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += spu_info.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += tm.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild
index bf736e764cb4..b15bf6bc0e94 100644
--- a/arch/s390/include/uapi/asm/Kbuild
+++ b/arch/s390/include/uapi/asm/Kbuild
@@ -1,54 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += chpid.h
-header-y += chsc.h
-header-y += clp.h
-header-y += cmb.h
-header-y += dasd.h
-header-y += debug.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += hypfs.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += kvm_perf.h
-header-y += kvm_virtio.h
-header-y += mman.h
-header-y += monwriter.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += qeth.h
-header-y += resource.h
-header-y += schid.h
-header-y += sclp_ctl.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sie.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += tape390.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += virtio-ccw.h
-header-y += vtoc.h
-header-y += zcrypt.h
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
index a05218ff3fe4..128ca7ec0220 100644
--- a/arch/score/include/asm/Kbuild
+++ b/arch/score/include/asm/Kbuild
@@ -1,7 +1,3 @@
-
-header-y +=
-
-
generic-y += barrier.h
generic-y += clkdev.h
generic-y += cputime.h
diff --git a/arch/score/include/uapi/asm/Kbuild b/arch/score/include/uapi/asm/Kbuild
index 040178cdb3eb..b15bf6bc0e94 100644
--- a/arch/score/include/uapi/asm/Kbuild
+++ b/arch/score/include/uapi/asm/Kbuild
@@ -1,34 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild
index 60613ae78513..b15bf6bc0e94 100644
--- a/arch/sh/include/uapi/asm/Kbuild
+++ b/arch/sh/include/uapi/asm/Kbuild
@@ -1,25 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += cpu-features.h
-header-y += hw_breakpoint.h
-header-y += ioctls.h
-header-y += posix_types.h
-header-y += posix_types_32.h
-header-y += posix_types_64.h
-header-y += ptrace.h
-header-y += ptrace_32.h
-header-y += ptrace_64.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += types.h
-header-y += unistd.h
-header-y += unistd_32.h
-header-y += unistd_64.h
diff --git a/arch/sparc/include/uapi/asm/Kbuild b/arch/sparc/include/uapi/asm/Kbuild
index b5843ee09fb5..b15bf6bc0e94 100644
--- a/arch/sparc/include/uapi/asm/Kbuild
+++ b/arch/sparc/include/uapi/asm/Kbuild
@@ -1,50 +1,2 @@
# UAPI Header export list
-# User exported sparc header files
-
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += apc.h
-header-y += asi.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += display7seg.h
-header-y += envctrl.h
-header-y += errno.h
-header-y += fbio.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += jsflash.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += openpromio.h
-header-y += param.h
-header-y += perfctr.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += psr.h
-header-y += psrcompat.h
-header-y += pstate.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += traps.h
-header-y += uctx.h
-header-y += unistd.h
-header-y += utrap.h
-header-y += watchdog.h
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index 2d1f5638974c..057eaa533877 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ../arch/
-
generic-y += bug.h
generic-y += bugs.h
generic-y += clkdev.h
diff --git a/arch/tile/include/uapi/arch/Kbuild b/arch/tile/include/uapi/arch/Kbuild
deleted file mode 100644
index 97dfbecec6b6..000000000000
--- a/arch/tile/include/uapi/arch/Kbuild
+++ /dev/null
@@ -1,17 +0,0 @@
-# UAPI Header export list
-header-y += abi.h
-header-y += chip.h
-header-y += chip_tilegx.h
-header-y += chip_tilepro.h
-header-y += icache.h
-header-y += interrupts.h
-header-y += interrupts_32.h
-header-y += interrupts_64.h
-header-y += opcode.h
-header-y += opcode_tilegx.h
-header-y += opcode_tilepro.h
-header-y += sim.h
-header-y += sim_def.h
-header-y += spr_def.h
-header-y += spr_def_32.h
-header-y += spr_def_64.h
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
index c20db8e428bf..e0a50111e07f 100644
--- a/arch/tile/include/uapi/asm/Kbuild
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -1,21 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += hardwall.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += ucontext.h
-header-y += unistd.h
-
generic-y += ucontext.h
+
+subdir-y += ../arch
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
index 0514d7ad6855..13a97aa2285f 100644
--- a/arch/unicore32/include/uapi/asm/Kbuild
+++ b/arch/unicore32/include/uapi/asm/Kbuild
@@ -1,10 +1,4 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += unistd.h
-
generic-y += kvm_para.h
diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
index 3dec769cadf7..83b6e9a0dce4 100644
--- a/arch/x86/include/uapi/asm/Kbuild
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -4,62 +4,3 @@ include include/uapi/asm-generic/Kbuild.asm
genhdr-y += unistd_32.h
genhdr-y += unistd_64.h
genhdr-y += unistd_x32.h
-header-y += a.out.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += boot.h
-header-y += bootparam.h
-header-y += byteorder.h
-header-y += debugreg.h
-header-y += e820.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += hw_breakpoint.h
-header-y += hyperv.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += ist.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += kvm_perf.h
-header-y += ldt.h
-header-y += mce.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += msr-index.h
-header-y += msr.h
-header-y += mtrr.h
-header-y += param.h
-header-y += perf_regs.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += posix_types_32.h
-header-y += posix_types_64.h
-header-y += posix_types_x32.h
-header-y += prctl.h
-header-y += processor-flags.h
-header-y += ptrace-abi.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += sigcontext32.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += svm.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += vm86.h
-header-y += vmx.h
-header-y += vsyscall.h
diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild
index 56aad54e7fb7..b15bf6bc0e94 100644
--- a/arch/xtensa/include/uapi/asm/Kbuild
+++ b/arch/xtensa/include/uapi/asm/Kbuild
@@ -1,25 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += termbits.h
-header-y += types.h
-header-y += unistd.h
diff --git a/include/Kbuild b/include/Kbuild
deleted file mode 100644
index bab1145bc7a7..000000000000
--- a/include/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# Top-level Makefile calls into asm-$(ARCH)
-# List only non-arch directories below
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
deleted file mode 100644
index d2ee86b4c091..000000000000
--- a/include/asm-generic/Kbuild.asm
+++ /dev/null
@@ -1 +0,0 @@
-include include/uapi/asm-generic/Kbuild.asm
diff --git a/include/scsi/fc/Kbuild b/include/scsi/fc/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/include/uapi/Kbuild b/include/uapi/Kbuild
deleted file mode 100644
index 245aa6e05e6a..000000000000
--- a/include/uapi/Kbuild
+++ /dev/null
@@ -1,15 +0,0 @@
-# UAPI Header export list
-# Top-level Makefile calls into asm-$(ARCH)
-# List only non-arch directories below
-
-
-header-y += asm-generic/
-header-y += linux/
-header-y += sound/
-header-y += mtd/
-header-y += rdma/
-header-y += video/
-header-y += drm/
-header-y += xen/
-header-y += scsi/
-header-y += misc/
diff --git a/include/uapi/asm-generic/Kbuild b/include/uapi/asm-generic/Kbuild
deleted file mode 100644
index b73de7bb7a62..000000000000
--- a/include/uapi/asm-generic/Kbuild
+++ /dev/null
@@ -1,36 +0,0 @@
-# UAPI Header export list
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += errno-base.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += int-l64.h
-header-y += int-ll64.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman-common.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += shmparam.h
-header-y += siginfo.h
-header-y += signal-defs.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/include/uapi/asm-generic/Kbuild.asm b/include/uapi/asm-generic/Kbuild.asm
index fcd50b759217..c13805d5a2a0 100644
--- a/include/uapi/asm-generic/Kbuild.asm
+++ b/include/uapi/asm-generic/Kbuild.asm
@@ -8,38 +8,38 @@ opt-header += a.out.h
#
# Headers that are mandatory in usr/include/asm/
#
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += byteorder.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += ptrace.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += sigcontext.h
+generic-y += siginfo.h
+generic-y += signal.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += unistd.h
-header-y += $(foreach hdr,$(opt-header), \
+generic-y += $(foreach hdr,$(opt-header), \
$(if \
$(wildcard \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/$(hdr) \
diff --git a/include/uapi/drm/Kbuild b/include/uapi/drm/Kbuild
deleted file mode 100644
index 9355dd8eff3b..000000000000
--- a/include/uapi/drm/Kbuild
+++ /dev/null
@@ -1,22 +0,0 @@
-# UAPI Header export list
-header-y += drm.h
-header-y += drm_fourcc.h
-header-y += drm_mode.h
-header-y += drm_sarea.h
-header-y += amdgpu_drm.h
-header-y += exynos_drm.h
-header-y += i810_drm.h
-header-y += i915_drm.h
-header-y += mga_drm.h
-header-y += nouveau_drm.h
-header-y += qxl_drm.h
-header-y += r128_drm.h
-header-y += radeon_drm.h
-header-y += savage_drm.h
-header-y += sis_drm.h
-header-y += tegra_drm.h
-header-y += via_drm.h
-header-y += vmwgfx_drm.h
-header-y += msm_drm.h
-header-y += vc4_drm.h
-header-y += virtgpu_drm.h
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
deleted file mode 100644
index a8b93e685239..000000000000
--- a/include/uapi/linux/Kbuild
+++ /dev/null
@@ -1,482 +0,0 @@
-# UAPI Header export list
-header-y += android/
-header-y += byteorder/
-header-y += can/
-header-y += caif/
-header-y += dvb/
-header-y += hdlc/
-header-y += hsi/
-header-y += iio/
-header-y += isdn/
-header-y += mmc/
-header-y += nfsd/
-header-y += raid/
-header-y += spi/
-header-y += sunrpc/
-header-y += tc_act/
-header-y += tc_ematch/
-header-y += netfilter/
-header-y += netfilter_arp/
-header-y += netfilter_bridge/
-header-y += netfilter_ipv4/
-header-y += netfilter_ipv6/
-header-y += usb/
-header-y += wimax/
-
-genhdr-y += version.h
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
-header-y += a.out.h
-endif
-
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += am437x-vpfe.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atm_eni.h
-header-y += atm.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atm_nicstar.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += audit.h
-header-y += auto_fs4.h
-header-y += auto_fs.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += baycom.h
-header-y += bcm933xx_hcs.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += blkzoned.h
-header-y += bpf_common.h
-header-y += bpf_perf_event.h
-header-y += bpf.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += bt-bmc.h
-header-y += btrfs.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdrom.h
-header-y += cec.h
-header-y += cec-funcs.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += devlink.h
-header-y += dlmconstants.h
-header-y += dlm_device.h
-header-y += dlm.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elfcore.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fou.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += genetlink.h
-header-y += gen_stats.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += gpio.h
-header-y += gsmmux.h
-header-y += gtp.h
-header-y += hdlcdrv.h
-header-y += hdlc.h
-header-y += hdreg.h
-header-y += hiddev.h
-header-y += hid.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hsr_netlink.h
-header-y += hyperv.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_macsec.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_slip.h
-header-y += if_team.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += igmp.h
-header-y += ila.h
-header-y += in6.h
-header-y += inet_diag.h
-header-y += in.h
-header-y += inotify.h
-header-y += input.h
-header-y += input-event-codes.h
-header-y += in_route.h
-header-y += ioctl.h
-header-y += ip6_tunnel.h
-header-y += ipc.h
-header-y += ip.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ip_vs.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn_divertif.h
-header-y += isdn.h
-header-y += isdnif.h
-header-y += isdn_ppp.h
-header-y += iso_fs.h
-header-y += ivtvfb.h
-header-y += ivtv.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kcmp.h
-header-y += kdev_t.h
-header-y += kd.h
-header-y += kernelcapi.h
-header-y += kernel.h
-header-y += kernel-page-flags.h
-header-y += kexec.h
-header-y += keyboard.h
-header-y += keyctl.h
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
-header-y += kvm.h
-endif
-
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
-header-y += kvm_para.h
-endif
-
-header-y += hw_breakpoint.h
-header-y += l2tp.h
-header-y += libc-compat.h
-header-y += lirc.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += lwtunnel.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += media-bus-format.h
-header-y += mei.h
-header-y += membarrier.h
-header-y += memfd.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mic_common.h
-header-y += mic_ioctl.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mpls.h
-header-y += mpls_iptunnel.h
-header-y += mqueue.h
-header-y += mroute6.h
-header-y += mroute.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += nbd.h
-header-y += ncp_fs.h
-header-y += ncp.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += ndctl.h
-header-y += neighbour.h
-header-y += netconf.h
-header-y += netdevice.h
-header-y += net_dropmon.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += net.h
-header-y += netlink_diag.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += net_namespace.h
-header-y += net_tstamp.h
-header-y += nfc.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfsacl.h
-header-y += nfs_fs.h
-header-y += nfs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nl80211.h
-header-y += n_r3964.h
-header-y += nubus.h
-header-y += nvme_ioctl.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += openvswitch.h
-header-y += packet_diag.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pktcdvd.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_acl.h
-header-y += posix_acl_xattr.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp_defs.h
-header-y += ppp-ioctl.h
-header-y += pps.h
-header-y += prctl.h
-header-y += psci.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += rio_cm_cdev.h
-header-y += rio_mport_cdev.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += scif_ioctl.h
-header-y += screen_info.h
-header-y += sctp.h
-header-y += sdla.h
-header-y += seccomp.h
-header-y += securebits.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial_core.h
-header-y += serial.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signalfd.h
-header-y += signal.h
-header-y += smiapp.h
-header-y += snmp.h
-header-y += sock_diag.h
-header-y += socket.h
-header-y += sockios.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += soundcard.h
-header-y += sound.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sync_file.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += target_core_user.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += tcp_metrics.h
-header-y += telephony.h
-header-y += termios.h
-header-y += thermal.h
-header-y += time.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc_config.h
-header-y += tipc_netlink.h
-header-y += tipc.h
-header-y += toshiba.h
-header-y += tty_flags.h
-header-y += tty.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += uleds.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += unix_diag.h
-header-y += usbdevice_fs.h
-header-y += usbip.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uuid.h
-header-y += uvcvideo.h
-header-y += v4l2-common.h
-header-y += v4l2-controls.h
-header-y += v4l2-dv-timings.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vfio.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_gpu.h
-header-y += virtio_ids.h
-header-y += virtio_input.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += virtio_scsi.h
-header-y += virtio_types.h
-header-y += virtio_vsock.h
-header-y += virtio_crypto.h
-header-y += vm_sockets.h
-header-y += vt.h
-header-y += vtpm_proxy.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
-header-y += xilinx-v4l2-controls.h
-header-y += zorro.h
-header-y += zorro_ids.h
-header-y += userfaultfd.h
diff --git a/include/uapi/linux/android/Kbuild b/include/uapi/linux/android/Kbuild
deleted file mode 100644
index ca011eec252a..000000000000
--- a/include/uapi/linux/android/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += binder.h
diff --git a/include/uapi/linux/byteorder/Kbuild b/include/uapi/linux/byteorder/Kbuild
deleted file mode 100644
index 619225b9ff2e..000000000000
--- a/include/uapi/linux/byteorder/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += big_endian.h
-header-y += little_endian.h
diff --git a/include/uapi/linux/caif/Kbuild b/include/uapi/linux/caif/Kbuild
deleted file mode 100644
index 43396612d3a3..000000000000
--- a/include/uapi/linux/caif/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += caif_socket.h
-header-y += if_caif.h
diff --git a/include/uapi/linux/can/Kbuild b/include/uapi/linux/can/Kbuild
deleted file mode 100644
index 21c91bf25a29..000000000000
--- a/include/uapi/linux/can/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += bcm.h
-header-y += error.h
-header-y += gw.h
-header-y += netlink.h
-header-y += raw.h
diff --git a/include/uapi/linux/dvb/Kbuild b/include/uapi/linux/dvb/Kbuild
deleted file mode 100644
index d40942cfc627..000000000000
--- a/include/uapi/linux/dvb/Kbuild
+++ /dev/null
@@ -1,9 +0,0 @@
-# UAPI Header export list
-header-y += audio.h
-header-y += ca.h
-header-y += dmx.h
-header-y += frontend.h
-header-y += net.h
-header-y += osd.h
-header-y += version.h
-header-y += video.h
diff --git a/include/uapi/linux/hdlc/Kbuild b/include/uapi/linux/hdlc/Kbuild
deleted file mode 100644
index 8c1d2cb75e33..000000000000
--- a/include/uapi/linux/hdlc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += ioctl.h
diff --git a/include/uapi/linux/hsi/Kbuild b/include/uapi/linux/hsi/Kbuild
deleted file mode 100644
index a16a00544258..000000000000
--- a/include/uapi/linux/hsi/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += hsi_char.h cs-protocol.h
diff --git a/include/uapi/linux/iio/Kbuild b/include/uapi/linux/iio/Kbuild
deleted file mode 100644
index 86f76d84c44f..000000000000
--- a/include/uapi/linux/iio/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += events.h
-header-y += types.h
diff --git a/include/uapi/linux/isdn/Kbuild b/include/uapi/linux/isdn/Kbuild
deleted file mode 100644
index 89e52850bf29..000000000000
--- a/include/uapi/linux/isdn/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += capicmd.h
diff --git a/include/uapi/linux/mmc/Kbuild b/include/uapi/linux/mmc/Kbuild
deleted file mode 100644
index 8c1d2cb75e33..000000000000
--- a/include/uapi/linux/mmc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += ioctl.h
diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild
deleted file mode 100644
index 03f194aeadc5..000000000000
--- a/include/uapi/linux/netfilter/Kbuild
+++ /dev/null
@@ -1,89 +0,0 @@
-# UAPI Header export list
-header-y += ipset/
-header-y += nf_conntrack_common.h
-header-y += nf_conntrack_ftp.h
-header-y += nf_conntrack_sctp.h
-header-y += nf_conntrack_tcp.h
-header-y += nf_conntrack_tuple_common.h
-header-y += nf_log.h
-header-y += nf_tables.h
-header-y += nf_tables_compat.h
-header-y += nf_nat.h
-header-y += nfnetlink.h
-header-y += nfnetlink_acct.h
-header-y += nfnetlink_compat.h
-header-y += nfnetlink_conntrack.h
-header-y += nfnetlink_cthelper.h
-header-y += nfnetlink_cttimeout.h
-header-y += nfnetlink_log.h
-header-y += nfnetlink_queue.h
-header-y += x_tables.h
-header-y += xt_AUDIT.h
-header-y += xt_CHECKSUM.h
-header-y += xt_CLASSIFY.h
-header-y += xt_CONNMARK.h
-header-y += xt_CONNSECMARK.h
-header-y += xt_CT.h
-header-y += xt_DSCP.h
-header-y += xt_HMARK.h
-header-y += xt_IDLETIMER.h
-header-y += xt_LED.h
-header-y += xt_LOG.h
-header-y += xt_MARK.h
-header-y += xt_NFLOG.h
-header-y += xt_NFQUEUE.h
-header-y += xt_RATEEST.h
-header-y += xt_SECMARK.h
-header-y += xt_SYNPROXY.h
-header-y += xt_TCPMSS.h
-header-y += xt_TCPOPTSTRIP.h
-header-y += xt_TEE.h
-header-y += xt_TPROXY.h
-header-y += xt_addrtype.h
-header-y += xt_bpf.h
-header-y += xt_cgroup.h
-header-y += xt_cluster.h
-header-y += xt_comment.h
-header-y += xt_connbytes.h
-header-y += xt_connlabel.h
-header-y += xt_connlimit.h
-header-y += xt_connmark.h
-header-y += xt_conntrack.h
-header-y += xt_cpu.h
-header-y += xt_dccp.h
-header-y += xt_devgroup.h
-header-y += xt_dscp.h
-header-y += xt_ecn.h
-header-y += xt_esp.h
-header-y += xt_hashlimit.h
-header-y += xt_helper.h
-header-y += xt_ipcomp.h
-header-y += xt_iprange.h
-header-y += xt_ipvs.h
-header-y += xt_l2tp.h
-header-y += xt_length.h
-header-y += xt_limit.h
-header-y += xt_mac.h
-header-y += xt_mark.h
-header-y += xt_multiport.h
-header-y += xt_nfacct.h
-header-y += xt_osf.h
-header-y += xt_owner.h
-header-y += xt_physdev.h
-header-y += xt_pkttype.h
-header-y += xt_policy.h
-header-y += xt_quota.h
-header-y += xt_rateest.h
-header-y += xt_realm.h
-header-y += xt_recent.h
-header-y += xt_rpfilter.h
-header-y += xt_sctp.h
-header-y += xt_set.h
-header-y += xt_socket.h
-header-y += xt_state.h
-header-y += xt_statistic.h
-header-y += xt_string.h
-header-y += xt_tcpmss.h
-header-y += xt_tcpudp.h
-header-y += xt_time.h
-header-y += xt_u32.h
diff --git a/include/uapi/linux/netfilter/ipset/Kbuild b/include/uapi/linux/netfilter/ipset/Kbuild
deleted file mode 100644
index d2680423d9ab..000000000000
--- a/include/uapi/linux/netfilter/ipset/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += ip_set.h
-header-y += ip_set_bitmap.h
-header-y += ip_set_hash.h
-header-y += ip_set_list.h
diff --git a/include/uapi/linux/netfilter_arp/Kbuild b/include/uapi/linux/netfilter_arp/Kbuild
deleted file mode 100644
index 62d5637cc0ac..000000000000
--- a/include/uapi/linux/netfilter_arp/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += arp_tables.h
-header-y += arpt_mangle.h
diff --git a/include/uapi/linux/netfilter_bridge/Kbuild b/include/uapi/linux/netfilter_bridge/Kbuild
deleted file mode 100644
index 0fbad8ef96de..000000000000
--- a/include/uapi/linux/netfilter_bridge/Kbuild
+++ /dev/null
@@ -1,18 +0,0 @@
-# UAPI Header export list
-header-y += ebt_802_3.h
-header-y += ebt_among.h
-header-y += ebt_arp.h
-header-y += ebt_arpreply.h
-header-y += ebt_ip.h
-header-y += ebt_ip6.h
-header-y += ebt_limit.h
-header-y += ebt_log.h
-header-y += ebt_mark_m.h
-header-y += ebt_mark_t.h
-header-y += ebt_nat.h
-header-y += ebt_nflog.h
-header-y += ebt_pkttype.h
-header-y += ebt_redirect.h
-header-y += ebt_stp.h
-header-y += ebt_vlan.h
-header-y += ebtables.h
diff --git a/include/uapi/linux/netfilter_ipv4/Kbuild b/include/uapi/linux/netfilter_ipv4/Kbuild
deleted file mode 100644
index ecb291df390e..000000000000
--- a/include/uapi/linux/netfilter_ipv4/Kbuild
+++ /dev/null
@@ -1,10 +0,0 @@
-# UAPI Header export list
-header-y += ip_tables.h
-header-y += ipt_CLUSTERIP.h
-header-y += ipt_ECN.h
-header-y += ipt_LOG.h
-header-y += ipt_REJECT.h
-header-y += ipt_TTL.h
-header-y += ipt_ah.h
-header-y += ipt_ecn.h
-header-y += ipt_ttl.h
diff --git a/include/uapi/linux/netfilter_ipv6/Kbuild b/include/uapi/linux/netfilter_ipv6/Kbuild
deleted file mode 100644
index 75a668ca2353..000000000000
--- a/include/uapi/linux/netfilter_ipv6/Kbuild
+++ /dev/null
@@ -1,13 +0,0 @@
-# UAPI Header export list
-header-y += ip6_tables.h
-header-y += ip6t_HL.h
-header-y += ip6t_LOG.h
-header-y += ip6t_NPT.h
-header-y += ip6t_REJECT.h
-header-y += ip6t_ah.h
-header-y += ip6t_frag.h
-header-y += ip6t_hl.h
-header-y += ip6t_ipv6header.h
-header-y += ip6t_mh.h
-header-y += ip6t_opts.h
-header-y += ip6t_rt.h
diff --git a/include/uapi/linux/nfsd/Kbuild b/include/uapi/linux/nfsd/Kbuild
deleted file mode 100644
index c11bc404053c..000000000000
--- a/include/uapi/linux/nfsd/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += cld.h
-header-y += debug.h
-header-y += export.h
-header-y += nfsfh.h
-header-y += stats.h
diff --git a/include/uapi/linux/raid/Kbuild b/include/uapi/linux/raid/Kbuild
deleted file mode 100644
index e2c3d25405d7..000000000000
--- a/include/uapi/linux/raid/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += md_p.h
-header-y += md_u.h
diff --git a/include/uapi/linux/spi/Kbuild b/include/uapi/linux/spi/Kbuild
deleted file mode 100644
index 0cc747eff165..000000000000
--- a/include/uapi/linux/spi/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += spidev.h
diff --git a/include/uapi/linux/sunrpc/Kbuild b/include/uapi/linux/sunrpc/Kbuild
deleted file mode 100644
index 8e02e47c20fb..000000000000
--- a/include/uapi/linux/sunrpc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += debug.h
diff --git a/include/uapi/linux/tc_act/Kbuild b/include/uapi/linux/tc_act/Kbuild
deleted file mode 100644
index e3db7403296f..000000000000
--- a/include/uapi/linux/tc_act/Kbuild
+++ /dev/null
@@ -1,15 +0,0 @@
-# UAPI Header export list
-header-y += tc_csum.h
-header-y += tc_defact.h
-header-y += tc_gact.h
-header-y += tc_ipt.h
-header-y += tc_mirred.h
-header-y += tc_nat.h
-header-y += tc_pedit.h
-header-y += tc_skbedit.h
-header-y += tc_vlan.h
-header-y += tc_bpf.h
-header-y += tc_connmark.h
-header-y += tc_ife.h
-header-y += tc_tunnel_key.h
-header-y += tc_skbmod.h
diff --git a/include/uapi/linux/tc_ematch/Kbuild b/include/uapi/linux/tc_ematch/Kbuild
deleted file mode 100644
index 53fca3925535..000000000000
--- a/include/uapi/linux/tc_ematch/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += tc_em_cmp.h
-header-y += tc_em_meta.h
-header-y += tc_em_nbyte.h
-header-y += tc_em_text.h
diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild
deleted file mode 100644
index 4cc4d6e7e523..000000000000
--- a/include/uapi/linux/usb/Kbuild
+++ /dev/null
@@ -1,12 +0,0 @@
-# UAPI Header export list
-header-y += audio.h
-header-y += cdc.h
-header-y += cdc-wdm.h
-header-y += ch11.h
-header-y += ch9.h
-header-y += functionfs.h
-header-y += g_printer.h
-header-y += gadgetfs.h
-header-y += midi.h
-header-y += tmc.h
-header-y += video.h
diff --git a/include/uapi/linux/wimax/Kbuild b/include/uapi/linux/wimax/Kbuild
deleted file mode 100644
index 1c97be49971f..000000000000
--- a/include/uapi/linux/wimax/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += i2400m.h
diff --git a/include/uapi/misc/Kbuild b/include/uapi/misc/Kbuild
deleted file mode 100644
index e96cae7d58c9..000000000000
--- a/include/uapi/misc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# misc Header export list
-header-y += cxl.h
diff --git a/include/uapi/mtd/Kbuild b/include/uapi/mtd/Kbuild
deleted file mode 100644
index 5a691e10cd0e..000000000000
--- a/include/uapi/mtd/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += inftl-user.h
-header-y += mtd-abi.h
-header-y += mtd-user.h
-header-y += nftl-user.h
-header-y += ubi-user.h
diff --git a/include/uapi/rdma/Kbuild b/include/uapi/rdma/Kbuild
deleted file mode 100644
index 82bdf5626859..000000000000
--- a/include/uapi/rdma/Kbuild
+++ /dev/null
@@ -1,18 +0,0 @@
-# UAPI Header export list
-header-y += ib_user_cm.h
-header-y += ib_user_mad.h
-header-y += ib_user_sa.h
-header-y += ib_user_verbs.h
-header-y += rdma_netlink.h
-header-y += rdma_user_cm.h
-header-y += hfi/
-header-y += rdma_user_rxe.h
-header-y += cxgb3-abi.h
-header-y += cxgb4-abi.h
-header-y += mlx4-abi.h
-header-y += mlx5-abi.h
-header-y += mthca-abi.h
-header-y += nes-abi.h
-header-y += ocrdma-abi.h
-header-y += hns-abi.h
-header-y += vmw_pvrdma-abi.h
diff --git a/include/uapi/rdma/hfi/Kbuild b/include/uapi/rdma/hfi/Kbuild
deleted file mode 100644
index ef23c294fc71..000000000000
--- a/include/uapi/rdma/hfi/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += hfi1_user.h
diff --git a/include/uapi/scsi/Kbuild b/include/uapi/scsi/Kbuild
deleted file mode 100644
index d791e0ad509d..000000000000
--- a/include/uapi/scsi/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += fc/
-header-y += scsi_bsg_fc.h
-header-y += scsi_netlink.h
-header-y += scsi_netlink_fc.h
-header-y += cxlflash_ioctl.h
diff --git a/include/uapi/scsi/fc/Kbuild b/include/uapi/scsi/fc/Kbuild
deleted file mode 100644
index 5ead9fac265c..000000000000
--- a/include/uapi/scsi/fc/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += fc_els.h
-header-y += fc_fs.h
-header-y += fc_gs.h
-header-y += fc_ns.h
diff --git a/include/uapi/sound/Kbuild b/include/uapi/sound/Kbuild
deleted file mode 100644
index 9578d8bdbf31..000000000000
--- a/include/uapi/sound/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-# UAPI Header export list
-header-y += asequencer.h
-header-y += asoc.h
-header-y += asound.h
-header-y += asound_fm.h
-header-y += compress_offload.h
-header-y += compress_params.h
-header-y += emu10k1.h
-header-y += firewire.h
-header-y += hdsp.h
-header-y += hdspm.h
-header-y += sb16_csp.h
-header-y += sfnt_info.h
-header-y += tlv.h
-header-y += usb_stream.h
-header-y += snd_sst_tokens.h
diff --git a/include/uapi/video/Kbuild b/include/uapi/video/Kbuild
deleted file mode 100644
index ac7203bb32cc..000000000000
--- a/include/uapi/video/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-# UAPI Header export list
-header-y += edid.h
-header-y += sisfb.h
-header-y += uvesafb.h
diff --git a/include/uapi/xen/Kbuild b/include/uapi/xen/Kbuild
deleted file mode 100644
index 5c459628e8c7..000000000000
--- a/include/uapi/xen/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += evtchn.h
-header-y += gntalloc.h
-header-y += gntdev.h
-header-y += privcmd.h
--git a/include/video/Kbuild b/include/video/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 876b42cfede4..bb93f8466a35 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -1,17 +1,18 @@
# ==========================================================================
# Installing headers
#
-# header-y - list files to be installed. They are preprocessed
-# to remove __KERNEL__ section of the file
-# genhdr-y - Same as header-y but in a generated/ directory
+# All headers under include/uapi, include/generated/uapi,
+# arch/<arch>/include/uapi/asm and /include/generated/uapi/asm are exported.
+# They are preprocessed to remove __KERNEL__ section of the file.
#
# ==========================================================================
# generated header directory
gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
+# Kbuild file is optional
kbuild-file := $(srctree)/$(obj)/Kbuild
-include $(kbuild-file)
+-include $(kbuild-file)
# called may set destination dir (when installing to asm/)
_dst := $(if $(dst),$(dst),$(obj))
@@ -25,9 +26,12 @@ include scripts/Kbuild.include
installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
-header-y := $(sort $(header-y))
-subdirs := $(patsubst %/,%,$(filter %/, $(header-y)))
-header-y := $(filter-out %/, $(header-y))
+subdirs := $(patsubst $(srctree)/$(obj)/%/.,%,$(wildcard $(srctree)/$(obj)/*/.))
+subdirs += $(subdir-y)
+header-files := $(notdir $(wildcard $(srctree)/$(obj)/*.h))
+header-files += $(notdir $(wildcard $(srctree)/$(obj)/*.agh))
+genhdr-files := $(notdir $(wildcard $(srctree)/$(gen)/*.h))
+genhdr-files := $(filter-out $(header-files), $(genhdr-files))
# files used to track state of install/check
install-file := $(installdir)/.install
@@ -35,26 +39,17 @@ check-file := $(installdir)/.check
# generic-y list all files an architecture uses from asm-generic
# Use this to build a list of headers which require a wrapper
-wrapper-files := $(filter $(header-y), $(generic-y))
+generic-files := $(notdir $(wildcard $(srctree)/include/uapi/asm-generic/*.h))
+wrapper-files := $(filter $(generic-files), $(generic-y))
+wrapper-files := $(filter-out $(header-files), $(wrapper-files))
srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
# all headers files for this dir
-header-y := $(filter-out $(generic-y), $(header-y))
-all-files := $(header-y) $(genhdr-y) $(wrapper-files)
+all-files := $(header-files) $(genhdr-files) $(wrapper-files)
output-files := $(addprefix $(installdir)/, $(all-files))
-# Check that all expected files exist
-$(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)),, \
- $(error Missing UAPI file $(srcdir)/$(hdr)) \
- ))
-$(foreach hdr, $(genhdr-y), \
- $(if $(wildcard $(gendir)/$(hdr)),, \
- $(error Missing generated UAPI file $(gendir)/$(hdr)) \
- ))
-
# Work out what needs to be removed
oldheaders := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
unwanted := $(filter-out $(all-files),$(oldheaders))
@@ -67,8 +62,8 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
cmd_install = \
- $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-y); \
- $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-y); \
+ $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-files); \
+ $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-files); \
for F in $(wrapper-files); do \
echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
done; \
--
2.8.1
^ permalink raw reply related
* [PATCHv2 0/2] Memblock cleanup plus memory removal fix
From: Magnus Lilja @ 2017-01-06 9:46 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483657274-11346-1-git-send-email-labbott@redhat.com>
Hi
On 6 January 2017 at 00:01, Laura Abbott <labbott@redhat.com> wrote:
> Hi,
>
> This is v2 of the series to make sanity_check_meminfo (renamed in this series)
> more readable and less error prone and fix an existing bug. v1 failed in that it
> re-introduced a previously fixed bug. Hopefully this version does better.
>
> As a reminder, During the course of
> https://marc.info/?l=linux-arm-kernel&m=148145259511248, Grygorii Strashko
> reminded me of another issue where I proposed a patch but never followed up on
> it. The patch in
> http://lists.infradead.org/pipermail/linux-arm-kernel/2014-October/296978.html
> did some cleanup and renaming of sanity_check_meminfo. I think this makes the
> code more readable so I'd like to resurect it and rebase my fix
> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-December/474060.html
> on top of it.
>
Tested the series on i.MX31 PDK board.
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
/Magnus
> Laura Abbott (2):
> arm: Cleanup sanity_check_meminfo
> arm: Adjust memory boundaries after reservations
>
> arch/arm/kernel/setup.c | 12 ++++++++--
> arch/arm/mm/mmu.c | 62 +++++++++++++++++--------------------------------
> arch/arm/mm/nommu.c | 8 +++----
> 3 files changed, 35 insertions(+), 47 deletions(-)
>
> --
> 2.7.4
>
^ permalink raw reply
* [RFC PATCH 1/7] arm64: Use physical counter for in-kernel reads
From: Christoffer Dall @ 2017-01-06 10:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <5e820613-f9f3-0035-b145-0e22e9bcfeca@arm.com>
Hi Marc,
On Thu, Jan 05, 2017 at 06:11:14PM +0000, Marc Zyngier wrote:
> [adding the arm64 maintainers, plus Mark as arch timer maintainer]
Right, sorry, I should have done that already.
>
> On 10/12/16 20:47, Christoffer Dall wrote:
> > Using the physical counter allows KVM to retain the offset between the
> > virtual and physical counter as long as it is actively running a VCPU.
> >
> > As soon as a VCPU is released, another thread is scheduled or we start
> > running userspace applications, we reset the offset to 0, so that VDSO
> > operations can still read the virtual counter and get the same view of
> > time as the kernel.
> >
> > This opens up potential improvements for KVM performance.
> >
> > VHE kernels or kernels using the virtual timer are unaffected by this.
> >
> > Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> > ---
> > arch/arm64/include/asm/arch_timer.h | 6 ++++--
> > drivers/clocksource/arm_arch_timer.c | 2 +-
> > 2 files changed, 5 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
> > index eaa5bbe..cec2549 100644
> > --- a/arch/arm64/include/asm/arch_timer.h
> > +++ b/arch/arm64/include/asm/arch_timer.h
> > @@ -139,11 +139,13 @@ static inline void arch_timer_set_cntkctl(u32 cntkctl)
> >
> > static inline u64 arch_counter_get_cntpct(void)
> > {
> > + u64 cval;
> > /*
> > * AArch64 kernel and user space mandate the use of CNTVCT.
> > */
> > - BUG();
> > - return 0;
> > + isb();
> > + asm volatile("mrs %0, cntpct_el0" : "=r" (cval));
> > + return cval;
> > }
> >
> > static inline u64 arch_counter_get_cntvct(void)
> > diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
> > index 73c487d..a5b0789 100644
> > --- a/drivers/clocksource/arm_arch_timer.c
> > +++ b/drivers/clocksource/arm_arch_timer.c
> > @@ -597,7 +597,7 @@ static void __init arch_counter_register(unsigned type)
> >
> > /* Register the CP15 based counter if we have one */
> > if (type & ARCH_CP15_TIMER) {
> > - if (IS_ENABLED(CONFIG_ARM64) || arch_timer_uses_ppi == VIRT_PPI)
> > + if (arch_timer_uses_ppi == VIRT_PPI || is_kernel_in_hyp_mode())
>
> Why do we have this is_kernel_in_hyp_mode clause? I can't think of any
> reason for a VHE kernel to use the virtual counter at all...
>
Good question. I think I just didn't want to change behavior from the
existing functionality mre than necessary.
Note that on a VHE kernel this will be the EL2 virtual counter, not the
EL1 virtual counter, due to the register redirection. Are the virtual
and physical EL2 counters always equivalent on a VHE system?
> > arch_timer_read_counter = arch_counter_get_cntvct;
> > else
> > arch_timer_read_counter = arch_counter_get_cntpct;
> >
>
Thanks,
-Christoffer
^ permalink raw reply
* [RFC PATCH 0/7] KVM: arm/arm64: Optimize arch timer register handling
From: Christoffer Dall @ 2017-01-06 10:01 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161210204712.21830-1-christoffer.dall@linaro.org>
On Sat, Dec 10, 2016 at 09:47:05PM +0100, Christoffer Dall wrote:
> We currently spend around ~400 cycles on each entry/exit to the guest
> dealing with arch timer registers, even when the timer is not pending
> and not doing anything.
>
> We can do much better by moving the arch timer save/restore to the
> vcpu_load and vcpu_put functions, but this means that if we don't read
> back the timer state on every exit from the guest, then we have to be
> able to start taking timer interrupts for the virtual timer in KVM and
> handle that properly.
>
> That has a number of funny consequences, such as having to make sure we
> don't deadlock between any of the vgic code and interrupt injection
> happening from an ISR. On the plus side, being able to inject
> virtual interrupts corresponding to a physical interrupt directly from
> an ISR is probably a good system design change.
>
> We also have to change the use of the physical vs. virtual counter in
> the arm64 kernel to avoid having to save/restore the CNTVOFF_EL2
> register on every return to the hypervisor. The only reason I could
> find for using the virtual counter for the kernel on systems with access
> to the physical counter is to detect if firmware did not properly clear
> CNTVOFF_EL2, and this change has to weighed against the existing check
> (assuming I got this right).
>
> On a non-VHE system (AMD Seattle) I have measured this to improve the
> world-switch time by about ~100 cycles, but on an EL2 kernel (emulating
> VHE behavior on the same hardware) this gives us around ~250 cycles
> worth of improvement, because we can avoid the extra configuration of
> trapping accesses to the physical timer from EL1 on every switch.
>
> I'm not sure if the benefits outweigh the complexity of this patch set,
> nor am I sure if I'm missing an overall better approach, hence the RFC
> tag on the series.
>
> I'm looking forward to overall comments on the approach.
>
FYI for anyone looking at these patches, I found some issues with the
series and will respin shortly. Patch 5 has also been split to
hopefully simplify the review, as I realized it is horrible to look at
in its current form.
Thanks,
-Christoffer
^ permalink raw reply
* [RFC PATCH 4/7] KVM: arm/arm64: Check that system supports split eoi/deactivate
From: Christoffer Dall @ 2017-01-06 10:02 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <7e44980f-d4b9-a5d0-b0a9-5424548300d8@arm.com>
On Thu, Jan 05, 2017 at 05:40:58PM +0000, Marc Zyngier wrote:
> On 10/12/16 20:47, Christoffer Dall wrote:
> > Some systems without proper firmware and/or hardware description data
> > don't support the split EOI and deactivate operation and therefore
> > don't provide an irq_set_vcpu_affinity implementation. On such
> > systems, we cannot leave the physical interrupt active after the timer
> > handler on the host has run, so we cannot support KVM with the timer
> > changes we about to introduce.
> >
> > Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> > ---
> > virt/kvm/arm/arch_timer.c | 30 ++++++++++++++++++++++++++++++
> > 1 file changed, 30 insertions(+)
> >
> > diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
> > index c7c3bfd..f27a086 100644
> > --- a/virt/kvm/arm/arch_timer.c
> > +++ b/virt/kvm/arm/arch_timer.c
> > @@ -418,6 +418,31 @@ static int kvm_timer_dying_cpu(unsigned int cpu)
> > return 0;
> > }
> >
> > +static bool has_split_eoi_deactivate_support(void)
> > +{
> > + struct irq_desc *desc;
> > + struct irq_data *data;
> > + struct irq_chip *chip;
> > +
> > + /*
> > + * Check if split EOI and deactivate is supported on this machine.
> > + */
> > + desc = irq_to_desc(host_vtimer_irq);
> > + if (!desc) {
> > + kvm_err("kvm_arch_timer: no host_vtimer_irq descriptor\n");
> > + return false;
> > + }
> > +
> > + data = irq_desc_get_irq_data(desc);
> > + chip = irq_data_get_irq_chip(data);
> > + if (!chip || !chip->irq_set_vcpu_affinity) {
> > + kvm_err("kvm_arch_timer: no split EOI/deactivate; abort\n");
> > + return false;
> > + }
> > +
> > + return true;
> > +}
>
> That feels really involved. How about reporting that we don't have a
> usable VGIC altogether from the GIC driver?
>
You mean not booting the kernel at all, or establish some communication
from the GIC driver to KVM, telling KVM if it's usable for
virtualization or not?
> > +
> > int kvm_timer_hyp_init(void)
> > {
> > struct arch_timer_kvm_info *info;
> > @@ -449,6 +474,11 @@ int kvm_timer_hyp_init(void)
> > return err;
> > }
> >
> > + if (!has_split_eoi_deactivate_support()) {
> > + disable_percpu_irq(host_vtimer_irq);
> > + return -ENODEV;
> > + }
> > +
> > kvm_info("virtual timer IRQ%d\n", host_vtimer_irq);
> >
> > cpuhp_setup_state(CPUHP_AP_KVM_ARM_TIMER_STARTING,
> >
>
Thanks,
-Christoffer
^ permalink raw reply
* ubi_io_read: error -74 (ECC error)
From: Anurag Raghavan (RBEI/ETW11) @ 2017-01-06 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Hi All,
My appdata partition could not be mounted or where the partition was not able to be used. Anyone can help me to find out the root cause of this. What are the possibilities of this ubifs corruption. Any patched are available to fix this issue.
I am using the kernel version-30.3.5
Any kernel patches are available to solve this issue...??
Error logs:
[ 1.797141] UBI error: ubi_io_read: error -74 (ECC error) while reading 253952 bytes from PEB 445:8192, read 253952 bytes
[ 1.808274] UBIFS error (pid 491): ubifs_scan: corrupt empty space at LEB 489:233760
[ 1.816037] UBIFS error (pid 491): ubifs_scanned_corruption: corruption at LEB 489:233760
[ 1.828660] UBIFS error (pid 491): ubifs_scan: LEB 489 scanning failed
[ 1.835215] UBIFS warning (pid 491): ubifs_ro_mode: switched to read-only mode, error -117
[ 1.843502] UBIFS error (pid 491): make_reservation: cannot reserve 58 bytes in jhead 2, error -117
[ 1.852569] UBIFS error (pid 491): do_writepage: cannot write page 0 of inode 76584, error -117
dpkg: error: unable to sync new file '/var/lib/dpkg/arch-new': Structure needs cleaning
Best regards
Raghavan Anurag
RBEI/ETW1
Tel. +91(422)667-4001 | Mobil 9986968950
^ permalink raw reply
* [PATCH net-next v4 0/4] Fix OdroidC2 Gigabit Tx link issue
From: Jerome Brunet @ 2017-01-06 10:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170105232508.GU14217@n2100.armlinux.org.uk>
On Thu, 2017-01-05 at 23:25 +0000, Russell King - ARM Linux wrote:
> On Mon, Nov 28, 2016 at 09:54:28AM -0800, Florian Fainelli wrote:
> >
> > If we start supporting generic "enable", "disable" type of
> > properties
> > with values that map directly to register definitions of the HW, we
> > leave too much room for these properties to be utilized to
> > implement a
> > specific policy, and this is not acceptable.
>
> Another concern with this patch is that the existing phylib "set_eee"
> code is horribly buggy - it just translates the modes from userspace
> into the register value and writes them directly to the register with
> no validation.??So it's possible to set modes in the register that
> the
> hardware doesn't support, and have them advertised to the link
> partner.
Hi Russell,
The purpose of this patch is to provide a way to mark as broken a
particular eee mode. At first, it had nothing to do with "set_eee" but,
as Florian rightly pointed out, users shouldn't be able to re-enable a
broken mode.
At first, I was thinking about returning -ENOSUP if a broken mode was
requested. Then I noticed the behavior you just described: A user can
request anything of "set_eee", he won't necessarily get what he asked
but won't get an error either.
To avoid mixing different topic in a single patch, I kept the same
behavior, not returning an error, just silently discarding broken modes
I agree with you, we should probably validate a bit more what we asked
of the hardware in set_eee.
I wonder if we should return an error though. With the current
implementation, user space application could simply ask to activate
everything, excepting the kernel to sort it out and return an error
only if something horribly wrong happened. If we start returning an
error for unsupported modes, we could break things. I guess we should
just silently filter the requested modes.
>
> I have a patch which fixes that, restricting (as we do elsewhere) the
> advert according to the EEE supported capabilities retrieved from the
> PCS
Could be interesting :)
> - maybe the problem here is that the PCS doesn't support support
> EEE in 1000baseT mode?
It does, and that's kind of the problem. EEE in ON for 100Tx and 1000T
by default with this PHY. I have several platform with the same MAC-PHY
combination. Only the OdroidC2 shows this particular issue with 1000T-
EEE
As explained in other mails in this thread. The problem does not come
from the MAC entering LPI. It actually comes from the link partner
entering LPI on the Rx path under significant Tx transfer. For some
reason, this completely mess up our PHY.
>
> Out of interest, which PHY is used on this platform?
The PHY is the Realtek RTL8211F
>
> On the SolidRun boards, they're using AR8035, and have suffered this
> occasional link drop problem.??What has been found is that it seems
> to
> be to do with the timing parameters, and it seemed to only be 1000bT
> that was affected.??I don't remember off hand exactly which or what
> the change was they made to stabilise it though, but I can probabily
> find out tomorrow.
>
Since the same combination of MAC-PHY works well on other designs, it
is also my feeling that is has something to do with some timing
parameter, maybe related to this particular PCB.
While debugging this issue, we tried to play with all the parameters we
could think of but never found anything worth mentioning.
If you have any ideas, I'd be happy to try.
Jerome
^ permalink raw reply
* [RFC PATCH 4/7] KVM: arm/arm64: Check that system supports split eoi/deactivate
From: Marc Zyngier @ 2017-01-06 10:24 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170106100257.GD21089@cbox>
On 06/01/17 10:02, Christoffer Dall wrote:
> On Thu, Jan 05, 2017 at 05:40:58PM +0000, Marc Zyngier wrote:
>> On 10/12/16 20:47, Christoffer Dall wrote:
>>> Some systems without proper firmware and/or hardware description data
>>> don't support the split EOI and deactivate operation and therefore
>>> don't provide an irq_set_vcpu_affinity implementation. On such
>>> systems, we cannot leave the physical interrupt active after the timer
>>> handler on the host has run, so we cannot support KVM with the timer
>>> changes we about to introduce.
>>>
>>> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
>>> ---
>>> virt/kvm/arm/arch_timer.c | 30 ++++++++++++++++++++++++++++++
>>> 1 file changed, 30 insertions(+)
>>>
>>> diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
>>> index c7c3bfd..f27a086 100644
>>> --- a/virt/kvm/arm/arch_timer.c
>>> +++ b/virt/kvm/arm/arch_timer.c
>>> @@ -418,6 +418,31 @@ static int kvm_timer_dying_cpu(unsigned int cpu)
>>> return 0;
>>> }
>>>
>>> +static bool has_split_eoi_deactivate_support(void)
>>> +{
>>> + struct irq_desc *desc;
>>> + struct irq_data *data;
>>> + struct irq_chip *chip;
>>> +
>>> + /*
>>> + * Check if split EOI and deactivate is supported on this machine.
>>> + */
>>> + desc = irq_to_desc(host_vtimer_irq);
>>> + if (!desc) {
>>> + kvm_err("kvm_arch_timer: no host_vtimer_irq descriptor\n");
>>> + return false;
>>> + }
>>> +
>>> + data = irq_desc_get_irq_data(desc);
>>> + chip = irq_data_get_irq_chip(data);
>>> + if (!chip || !chip->irq_set_vcpu_affinity) {
>>> + kvm_err("kvm_arch_timer: no split EOI/deactivate; abort\n");
>>> + return false;
>>> + }
>>> +
>>> + return true;
>>> +}
>>
>> That feels really involved. How about reporting that we don't have a
>> usable VGIC altogether from the GIC driver?
>>
>
> You mean not booting the kernel at all, or establish some communication
> from the GIC driver to KVM, telling KVM if it's usable for
> virtualization or not?
We already query the vgic configuration by calling gic_get_kvm_info() at
boot time. My suggestion is to make it return NULL if the GIC can't
support split EOI/deactivate, and fallback to the "no-vgic" mode, if
ever implemented.
Thoughts?
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply
* [RFC PATCH 1/7] arm64: Use physical counter for in-kernel reads
From: Marc Zyngier @ 2017-01-06 10:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170106100049.GB21089@cbox>
On 06/01/17 10:00, Christoffer Dall wrote:
> Hi Marc,
>
> On Thu, Jan 05, 2017 at 06:11:14PM +0000, Marc Zyngier wrote:
>> [adding the arm64 maintainers, plus Mark as arch timer maintainer]
>
> Right, sorry, I should have done that already.
>
>>
>> On 10/12/16 20:47, Christoffer Dall wrote:
>>> Using the physical counter allows KVM to retain the offset between the
>>> virtual and physical counter as long as it is actively running a VCPU.
>>>
>>> As soon as a VCPU is released, another thread is scheduled or we start
>>> running userspace applications, we reset the offset to 0, so that VDSO
>>> operations can still read the virtual counter and get the same view of
>>> time as the kernel.
>>>
>>> This opens up potential improvements for KVM performance.
>>>
>>> VHE kernels or kernels using the virtual timer are unaffected by this.
>>>
>>> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
>>> ---
>>> arch/arm64/include/asm/arch_timer.h | 6 ++++--
>>> drivers/clocksource/arm_arch_timer.c | 2 +-
>>> 2 files changed, 5 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
>>> index eaa5bbe..cec2549 100644
>>> --- a/arch/arm64/include/asm/arch_timer.h
>>> +++ b/arch/arm64/include/asm/arch_timer.h
>>> @@ -139,11 +139,13 @@ static inline void arch_timer_set_cntkctl(u32 cntkctl)
>>>
>>> static inline u64 arch_counter_get_cntpct(void)
>>> {
>>> + u64 cval;
>>> /*
>>> * AArch64 kernel and user space mandate the use of CNTVCT.
>>> */
>>> - BUG();
>>> - return 0;
>>> + isb();
>>> + asm volatile("mrs %0, cntpct_el0" : "=r" (cval));
>>> + return cval;
>>> }
>>>
>>> static inline u64 arch_counter_get_cntvct(void)
>>> diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
>>> index 73c487d..a5b0789 100644
>>> --- a/drivers/clocksource/arm_arch_timer.c
>>> +++ b/drivers/clocksource/arm_arch_timer.c
>>> @@ -597,7 +597,7 @@ static void __init arch_counter_register(unsigned type)
>>>
>>> /* Register the CP15 based counter if we have one */
>>> if (type & ARCH_CP15_TIMER) {
>>> - if (IS_ENABLED(CONFIG_ARM64) || arch_timer_uses_ppi == VIRT_PPI)
>>> + if (arch_timer_uses_ppi == VIRT_PPI || is_kernel_in_hyp_mode())
>>
>> Why do we have this is_kernel_in_hyp_mode clause? I can't think of any
>> reason for a VHE kernel to use the virtual counter at all...
>>
>
> Good question. I think I just didn't want to change behavior from the
> existing functionality mre than necessary.
>
> Note that on a VHE kernel this will be the EL2 virtual counter, not the
> EL1 virtual counter, due to the register redirection. Are the virtual
> and physical EL2 counters always equivalent on a VHE system?
Yes, they are. CNTVOFF_EL2 is ignored in that case, and you get an extra
interrupt for the new EL2 virtual timer as well.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply
* [PATCH V6 05/10] acpi: apei: handle SEA notification type for ARMv8
From: James Morse @ 2017-01-06 10:43 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <8b7fa162-0d44-025f-758d-d61cfa75c787@codeaurora.org>
Hi Tyler,
On 05/01/17 22:31, Baicar, Tyler wrote:
> On 12/20/2016 8:29 AM, James Morse wrote:
>> On 07/12/16 21:48, Tyler Baicar wrote:
>>> ARM APEI extension proposal added SEA (Synchrounous External
>>> Abort) notification type for ARMv8.
>>> Add a new GHES error source handling function for SEA. If an error
>>> source's notification type is SEA, then this function can be registered
>>> into the SEA exception handler. That way GHES will parse and report
>>> SEA exceptions when they occur.
>>> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
>>> index 2acbc60..66ab3fd 100644
>>> --- a/drivers/acpi/apei/ghes.c
>>> +++ b/drivers/acpi/apei/ghes.c
>>> @@ -767,6 +771,62 @@ static struct notifier_block ghes_notifier_sci = {
>>> .notifier_call = ghes_notify_sci,
>>> };
>>> +#ifdef CONFIG_HAVE_ACPI_APEI_SEA
>>> +static LIST_HEAD(ghes_sea);
>>> +
>>> +static int ghes_notify_sea(struct notifier_block *this,
>>> + unsigned long event, void *data)
>>> +{
>>> + struct ghes *ghes;
>>> + int ret = NOTIFY_DONE;
>>> +
>>> + rcu_read_lock();
>>> + list_for_each_entry_rcu(ghes, &ghes_sea, list) {
>>> + if (!ghes_proc(ghes))
>>> + ret = NOTIFY_OK;
>>> + }
>>> + rcu_read_unlock();
>>> +
>>> + return ret;
>>> +}
>> What stops this from being re-entrant?
>>
>> ghes_copy_tofrom_phs() takes the ghes_ioremap_lock_irq spinlock, but there is
>> nothing to stop a subsequent instruction fetch or memory access causing another
>> (maybe different) Synchronous External Abort which deadlocks trying to take the
>> same lock.
>>
>> ghes_notify_sea() looks to be based on ghes_notify_sci(), which (if I've found
>> the right part of the ACPI spec) is a level-low interrupt. spin_lock_irqsave()
>> would mask interrupts so there is no risk of a different notification firing on
>> the same CPU, (it looks like they are almost all ultimately an irq).
>>
>> NMI is the odd one out because its not maskable like this, but ghes_notify_nmi()
>> has:
>>> if (!atomic_add_unless(&ghes_in_nmi, 1, 1))
>>> return ret;
>> To ensure there is only ever one thread poking around in this code.
>>
>> What happens if a system describes two GHES sources, one using an irq the other
>> SEA? The SEA error can interrupt the irq error while its holding the above lock.
>> I guess this is also why all the NMI code in that file is separate.
> Let me see if I'm following you right :)
> I should use spin_lock_irqsave() in ghes_notify_sea() to avoid ghes_notify_sci()
> from
> interrupting this process and potentially causing the deadlock?
This way round you are already safe: The CPU masks interrupts when it takes the
exception, they should still be masked by the time we get in here...
The other way round is a lot more fun!
What happens if APEI is processing some error record that was notified via an
interrupt, and then takes the Synchronous External Abort, and ends up back in
this code? Masking interrupts doesn't stop the external-abort, and trying to
take the ghes_ioremap_lock_irq will deadlock.
What happens if we interrupt printk() holding all its locks is another thing I
haven't worked out yet.
> This race condition does seem valid. We are using the same acknowledgment for
> all our
> HEST table entries, so our firmware will not populate more than one entry at a
> time. That
> gets us around this race condition.
Ah, so your firmware will wait for the interrupt-signalled error to be finished
before it triggers the Synchronous External Abort. I think this would still be a
linux bug if the firmware didn't do this.
x86 could have done the same with NMI notifications, but we have all this 'if
(in_nmi)' to allow interrupts-masked GHES handling to be interrupted.
What do you think to re-using the 'if (in_nmi)' code for SEA? We can argue that
SEA is NMI-like in that it can't be masked, and it interrupts code that had
interrupts masked. It 'should' be as simple as putting 'HAVE_NMI' in arm64's
Kconfig, and wrapping the atomic notifier call with nmi_enter()/nmi_exit() from
linux/hardirq.h. (...famous last words...)
This probably answers my printk() questions too, but I need to look into it some
more.
Thanks,
James
^ permalink raw reply
* [PATCH v2 2/4] linux/const.h: move UL() macro to include/linux/const.h
From: David Howells @ 2017-01-06 10:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483582810-7046-3-git-send-email-yamada.masahiro@socionext.com>
Masahiro Yamada <yamada.masahiro@socionext.com> wrote:
> diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h
> index c872bfd..76fb0f9 100644
> --- a/include/uapi/linux/const.h
> +++ b/include/uapi/linux/const.h
> @@ -1,7 +1,7 @@
> /* const.h: Macros for dealing with constants. */
>
> -#ifndef _LINUX_CONST_H
> -#define _LINUX_CONST_H
> +#ifndef _UAPI_LINUX_CONST_H
> +#define _UAPI_LINUX_CONST_H
You need to be very careful doing this. Some userspace stuff depends on the
guard macro names on the kernel header files.
> /* Some constant macros are used in both assembler and
> * C code. Therefore we cannot annotate them always with
> @@ -21,7 +21,10 @@
> #define _AT(T,X) ((T)(X))
> #endif
>
> +#define _UL(x) (_AC(x, UL))
> +#define _ULL(x) (_AC(x, ULL))
How likely is this to collide with existing userspace code somewhere? It
looks like the sort of thing that could collide with a C library.
David
^ permalink raw reply
* [RFC PATCH 1/7] arm64: Use physical counter for in-kernel reads
From: Christoffer Dall @ 2017-01-06 10:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <89b4c1c1-3c6a-b7a1-cbcb-93a64812ebff@arm.com>
On Fri, Jan 06, 2017 at 10:38:49AM +0000, Marc Zyngier wrote:
> On 06/01/17 10:00, Christoffer Dall wrote:
> > Hi Marc,
> >
> > On Thu, Jan 05, 2017 at 06:11:14PM +0000, Marc Zyngier wrote:
> >> [adding the arm64 maintainers, plus Mark as arch timer maintainer]
> >
> > Right, sorry, I should have done that already.
> >
> >>
> >> On 10/12/16 20:47, Christoffer Dall wrote:
> >>> Using the physical counter allows KVM to retain the offset between the
> >>> virtual and physical counter as long as it is actively running a VCPU.
> >>>
> >>> As soon as a VCPU is released, another thread is scheduled or we start
> >>> running userspace applications, we reset the offset to 0, so that VDSO
> >>> operations can still read the virtual counter and get the same view of
> >>> time as the kernel.
> >>>
> >>> This opens up potential improvements for KVM performance.
> >>>
> >>> VHE kernels or kernels using the virtual timer are unaffected by this.
> >>>
> >>> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> >>> ---
> >>> arch/arm64/include/asm/arch_timer.h | 6 ++++--
> >>> drivers/clocksource/arm_arch_timer.c | 2 +-
> >>> 2 files changed, 5 insertions(+), 3 deletions(-)
> >>>
> >>> diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
> >>> index eaa5bbe..cec2549 100644
> >>> --- a/arch/arm64/include/asm/arch_timer.h
> >>> +++ b/arch/arm64/include/asm/arch_timer.h
> >>> @@ -139,11 +139,13 @@ static inline void arch_timer_set_cntkctl(u32 cntkctl)
> >>>
> >>> static inline u64 arch_counter_get_cntpct(void)
> >>> {
> >>> + u64 cval;
> >>> /*
> >>> * AArch64 kernel and user space mandate the use of CNTVCT.
> >>> */
> >>> - BUG();
> >>> - return 0;
> >>> + isb();
> >>> + asm volatile("mrs %0, cntpct_el0" : "=r" (cval));
> >>> + return cval;
> >>> }
> >>>
> >>> static inline u64 arch_counter_get_cntvct(void)
> >>> diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
> >>> index 73c487d..a5b0789 100644
> >>> --- a/drivers/clocksource/arm_arch_timer.c
> >>> +++ b/drivers/clocksource/arm_arch_timer.c
> >>> @@ -597,7 +597,7 @@ static void __init arch_counter_register(unsigned type)
> >>>
> >>> /* Register the CP15 based counter if we have one */
> >>> if (type & ARCH_CP15_TIMER) {
> >>> - if (IS_ENABLED(CONFIG_ARM64) || arch_timer_uses_ppi == VIRT_PPI)
> >>> + if (arch_timer_uses_ppi == VIRT_PPI || is_kernel_in_hyp_mode())
> >>
> >> Why do we have this is_kernel_in_hyp_mode clause? I can't think of any
> >> reason for a VHE kernel to use the virtual counter at all...
> >>
> >
> > Good question. I think I just didn't want to change behavior from the
> > existing functionality mre than necessary.
> >
> > Note that on a VHE kernel this will be the EL2 virtual counter, not the
> > EL1 virtual counter, due to the register redirection. Are the virtual
> > and physical EL2 counters always equivalent on a VHE system?
>
> Yes, they are. CNTVOFF_EL2 is ignored in that case, and you get an extra
> interrupt for the new EL2 virtual timer as well.
>
ok, in that case I suppose I can just check for arch_timer_uses_ppi ==
VIRT_PPI and be done with it.
Thanks,
-Christoffer
^ permalink raw reply
* [RFC PATCH 4/7] KVM: arm/arm64: Check that system supports split eoi/deactivate
From: Christoffer Dall @ 2017-01-06 10:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <c3f788da-4cae-76ee-d186-ad44fcf3a318@arm.com>
On Fri, Jan 06, 2017 at 10:24:04AM +0000, Marc Zyngier wrote:
> On 06/01/17 10:02, Christoffer Dall wrote:
> > On Thu, Jan 05, 2017 at 05:40:58PM +0000, Marc Zyngier wrote:
> >> On 10/12/16 20:47, Christoffer Dall wrote:
> >>> Some systems without proper firmware and/or hardware description data
> >>> don't support the split EOI and deactivate operation and therefore
> >>> don't provide an irq_set_vcpu_affinity implementation. On such
> >>> systems, we cannot leave the physical interrupt active after the timer
> >>> handler on the host has run, so we cannot support KVM with the timer
> >>> changes we about to introduce.
> >>>
> >>> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> >>> ---
> >>> virt/kvm/arm/arch_timer.c | 30 ++++++++++++++++++++++++++++++
> >>> 1 file changed, 30 insertions(+)
> >>>
> >>> diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
> >>> index c7c3bfd..f27a086 100644
> >>> --- a/virt/kvm/arm/arch_timer.c
> >>> +++ b/virt/kvm/arm/arch_timer.c
> >>> @@ -418,6 +418,31 @@ static int kvm_timer_dying_cpu(unsigned int cpu)
> >>> return 0;
> >>> }
> >>>
> >>> +static bool has_split_eoi_deactivate_support(void)
> >>> +{
> >>> + struct irq_desc *desc;
> >>> + struct irq_data *data;
> >>> + struct irq_chip *chip;
> >>> +
> >>> + /*
> >>> + * Check if split EOI and deactivate is supported on this machine.
> >>> + */
> >>> + desc = irq_to_desc(host_vtimer_irq);
> >>> + if (!desc) {
> >>> + kvm_err("kvm_arch_timer: no host_vtimer_irq descriptor\n");
> >>> + return false;
> >>> + }
> >>> +
> >>> + data = irq_desc_get_irq_data(desc);
> >>> + chip = irq_data_get_irq_chip(data);
> >>> + if (!chip || !chip->irq_set_vcpu_affinity) {
> >>> + kvm_err("kvm_arch_timer: no split EOI/deactivate; abort\n");
> >>> + return false;
> >>> + }
> >>> +
> >>> + return true;
> >>> +}
> >>
> >> That feels really involved. How about reporting that we don't have a
> >> usable VGIC altogether from the GIC driver?
> >>
> >
> > You mean not booting the kernel at all, or establish some communication
> > from the GIC driver to KVM, telling KVM if it's usable for
> > virtualization or not?
>
> We already query the vgic configuration by calling gic_get_kvm_info() at
> boot time. My suggestion is to make it return NULL if the GIC can't
> support split EOI/deactivate, and fallback to the "no-vgic" mode, if
> ever implemented.
>
That sounds good to me.
Thanks,
-Christoffer
^ permalink raw reply
* [PATCH v6 01/18] iommu/dma: Allow MSI-only cookies
From: Joerg Roedel @ 2017-01-06 10:59 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483643086-2883-2-git-send-email-eric.auger@redhat.com>
On Thu, Jan 05, 2017 at 07:04:29PM +0000, Eric Auger wrote:
> struct iommu_dma_cookie {
> - struct iova_domain iovad;
> - struct list_head msi_page_list;
> - spinlock_t msi_lock;
> + union {
> + struct iova_domain iovad;
> + dma_addr_t msi_iova;
> + };
> + struct list_head msi_page_list;
> + spinlock_t msi_lock;
> + enum iommu_dma_cookie_type type;
Please move the type to the beginning of the struct and add a comment
how the type relates to the union.
Joerg
^ permalink raw reply
* [PATCH v6 07/18] iommu: Implement reserved_regions iommu-group sysfs file
From: Joerg Roedel @ 2017-01-06 11:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483643086-2883-8-git-send-email-eric.auger@redhat.com>
On Thu, Jan 05, 2017 at 07:04:35PM +0000, Eric Auger wrote:
> + list_for_each_entry_safe(region, next, &group_resv_regions, list) {
> + str += sprintf(str, "0x%016llx 0x%016llx\n",
> + (long long int)region->start,
> + (long long int)(region->start +
> + region->length - 1));
> + kfree(region);
> + }
I think it also makes sense to report the type of the reserved region.
Joerg
^ permalink raw reply
* [PATCH v6 08/18] iommu/vt-d: Implement reserved region get/put callbacks
From: Joerg Roedel @ 2017-01-06 11:01 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483643086-2883-9-git-send-email-eric.auger@redhat.com>
On Thu, Jan 05, 2017 at 07:04:36PM +0000, Eric Auger wrote:
> +static void intel_iommu_get_resv_regions(struct device *device,
> + struct list_head *head)
> +{
> + struct iommu_resv_region *reg;
> +
> + reg = iommu_alloc_resv_region(IOAPIC_RANGE_START,
> + IOAPIC_RANGE_END - IOAPIC_RANGE_START + 1,
> + 0, IOMMU_RESV_NOMAP);
> + if (!reg)
> + return;
> + list_add_tail(®->list, head);
> +}
That is different from what AMD does, can you also report the RMRR
regions for the device here (as direct-map regions)?
Joerg
^ permalink raw reply
* [PATCH v6 00/18] KVM PCIe/MSI passthrough on ARM/ARM64 and IOVA reserved regions
From: Joerg Roedel @ 2017-01-06 11:02 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483643086-2883-1-git-send-email-eric.auger@redhat.com>
On Thu, Jan 05, 2017 at 07:04:28PM +0000, Eric Auger wrote:
> iommu/dma: Allow MSI-only cookies
> iommu: Rename iommu_dm_regions into iommu_resv_regions
> iommu: Add a new type field in iommu_resv_region
> iommu: iommu_alloc_resv_region
> iommu: Only map direct mapped regions
> iommu: iommu_get_group_resv_regions
> iommu: Implement reserved_regions iommu-group sysfs file
> iommu/vt-d: Implement reserved region get/put callbacks
> iommu/amd: Declare MSI and HT regions as reserved IOVA regions
> iommu/arm-smmu: Implement reserved region get/put callbacks
> iommu/arm-smmu-v3: Implement reserved region get/put callbacks
The iommu changes look mostly good to me. I posted a few comments to
individual patches.
Joerg
^ permalink raw reply
* [PATCH V8 1/9] iommu: add IOMMU_PRIV attribute
From: Joerg Roedel @ 2017-01-06 11:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1483362764-11990-2-git-send-email-sricharan@codeaurora.org>
On Mon, Jan 02, 2017 at 06:42:36PM +0530, Sricharan R wrote:
> From: Mitchel Humpherys <mitchelh@codeaurora.org>
>
> Add the IOMMU_PRIV attribute, which is used to indicate privileged
> mappings.
>
> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
> Tested-by: Robin Murphy <robin.murphy@arm.com>
> Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
> Acked-by: Will Deacon <will.deacon@arm.com>
> ---
> include/linux/iommu.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 0ff5111..8c15ada 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -31,6 +31,7 @@
> #define IOMMU_CACHE (1 << 2) /* DMA cache coherency */
> #define IOMMU_NOEXEC (1 << 3)
> #define IOMMU_MMIO (1 << 4) /* e.g. things like MSI doorbells */
> +#define IOMMU_PRIV (1 << 5) /* privileged */
Since this is a new generic global flag, can you please add a more
verbose comment telling what a 'privileged' mapping is about in the
iommu-case? We should have a clear defined semantic for this flag or we
might end up with different meanings for it with different
iommu-hardware.
Joerg
^ permalink raw reply
* [PATCH 1/2] arm64: dma_mapping: allow PCI host driver to limit DMA mask
From: Arnd Bergmann @ 2017-01-06 11:10 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <9d5e32d3-000c-2f95-7ea8-c64d53ab6b56@cogentembedded.com>
On Wednesday, January 4, 2017 6:29:39 PM CET Nikita Yushchenko wrote:
> > Just a guess, but if the inbound translation windows in the host
> > bridge are wider than 32-bit, the reason for setting up a single
> > 32-bit window is probably because that is what the parent bus supports.
>
> Well anyway applying patch similar to your's will fix pcie-rcar + nvme
> case - thus I don't object :) But it can break other cases ...
>
> But why do you hook at set_dma_mask() and overwrite mask inside, instead
> of hooking at dma_supported() and rejecting unsupported mask?
>
> I think later is better, because it lets drivers to handle unsupported
> high-dma case, like documented in DMA-API_HOWTO.
I think the behavior I put in there is required for swiotlb to make
sense, otherwise you would rely on the driver to handle dma_set_mask()
failure gracefully with its own bounce buffers (as network and
scsi drivers do but others don't).
Having swiotlb or iommu enabled should result in dma_set_mask() always
succeeding unless the mask is too small to cover the swiotlb
bounce buffer area or the iommu virtual address space. This behavior
is particularly important in case the bus address space is narrower
than 32-bit, as we have to guarantee that the fallback to 32-bit
DMA always succeeds. There are also a lot of drivers that try to
set a 64-bit mask but don't implement bounce buffers for streaming
mappings if that fails, and swiotlb is what we use to make those
drivers work.
And yes, the API is a horrible mess.
Arnd
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox