* [RESEND PATCH V2] ARM: dts: introduce the sama5d2 ptc ek board
From: Alexandre Belloni @ 2017-12-08 15:57 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171207082453.10593-1-ludovic.desroches@microchip.com>
On 07/12/2017 at 09:24:53 +0100, Ludovic Desroches wrote:
> Add the official SAMA5D2 Peripheral Touch Controller Evaluation
> Kit board.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> ---
> Resend: Put SPDX-License-Identifier at the beginning of the file.
>
> Changes:
> - v2:
> - remove memory node
> - use SPDX-License-Identifier
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 401 ++++++++++++++++++++++++++++++
> 2 files changed, 402 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
>
Applied, thanks.
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply
* [PATCH] dt-bindings: pinctrl: stm32: fix copyright and adopt SPDX identifier
From: Alexandre Torgue @ 2017-12-08 15:53 UTC (permalink / raw)
To: linux-arm-kernel
Add missing copyright and add SPDX identifier.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
diff --git a/include/dt-bindings/pinctrl/stm32-pinfunc.h b/include/dt-bindings/pinctrl/stm32-pinfunc.h
index b8dfe31..b5a2174 100644
--- a/include/dt-bindings/pinctrl/stm32-pinfunc.h
+++ b/include/dt-bindings/pinctrl/stm32-pinfunc.h
@@ -1,3 +1,9 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Torgue Alexandre <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
#ifndef _DT_BINDINGS_STM32_PINFUNC_H
#define _DT_BINDINGS_STM32_PINFUNC_H
--
2.7.4
^ permalink raw reply related
* [Patch v6 05/12] [media] videodev2.h: Add v4l2 definition for HEVC
From: Nicolas Dufresne @ 2017-12-08 15:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512724105-1778-6-git-send-email-smitha.t@samsung.com>
Le vendredi 08 d?cembre 2017 ? 14:38 +0530, Smitha T Murthy a ?crit :
> Add V4L2 definition for HEVC compressed format
>
> Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
> include/uapi/linux/videodev2.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> index 185d6a0..bd9b5d5 100644
> --- a/include/uapi/linux/videodev2.h
> +++ b/include/uapi/linux/videodev2.h
> @@ -634,6 +634,7 @@ struct v4l2_pix_format {
> #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
> #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
> #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */
> +#define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */
Wouldn't it be more consistent to call it V4L2_PIX_FMT_H265 as we have
used H264 for the previous generation, or is there a formal rationale ?
Also, this is byte-stream right ? With start codes ?
>
> /* Vendor-specific formats */
> #define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 195 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171208/8fe4280d/attachment-0001.sig>
^ permalink raw reply
* [PATCH net-next v4 0/2] net: thunderx: add support for PTP clock
From: Richard Cochran @ 2017-12-08 15:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208103442.19354-1-aleksey.makarov@cavium.com>
On Fri, Dec 08, 2017 at 01:34:38PM +0300, Aleksey Makarov wrote:
> This series adds support for IEEE 1588 Precision Time Protocol
> to Cavium ethernet driver.
>
> The first patch adds support for the Precision Time Protocol Clocks and
> Timestamping coprocessor (PTP) found on Cavium processors.
> It registers a new PTP clock in the PTP core and provides functions
> to use the counter in BGX, TNS, GTI, and NIC blocks.
>
> The second patch introduces support for the PTP protocol to the
> Cavium ThunderX ethernet driver.
>
> v4:
> - use IS_ENABLED. This fixes compilation of the ptp as a module (David Miller)
> - select PTP_1588_CLOCK, not depend on it. This fixes a build warning.
It should be "imply" not "select".
Thanks,
Richard
^ permalink raw reply
* [RFC PATCH 2/5] perf jevents: add support for arch recommended events
From: John Garry @ 2017-12-08 15:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208122918.GE2799@krava>
On 08/12/2017 12:29, Jiri Olsa wrote:
> On Wed, Dec 06, 2017 at 03:20:14PM +0000, John Garry wrote:
>> On 06/12/2017 13:36, Jiri Olsa wrote:
>>> On Wed, Dec 06, 2017 at 12:13:16AM +0800, John Garry wrote:
>>>> For some architectures (like arm64), there are architecture-
>>>> defined recommended events. Vendors may not be obliged to
>>>> follow the recommendation and may implement their own pmu
>>>> event for a specific event code.
>>>>
>>>> This patch adds support for parsing events from arch-defined
>>>> recommended JSONs, and then fixing up vendor events when
>>>> they have implemented these events as recommended.
>>>
>>> in the previous patch you added the vendor support, so
>>> you have arch|vendor|platform key for the event list
>>> and perf have the most current/local event list
>>>
>>> why would you need to fix it? if there's new event list,
>>> the table gets updated, perf is rebuilt.. I'm clearly
>>> missing something ;-)
>>
>> The 2 patches are quite separate. In the first patch, I just added support
>> for the vendor subdirectory.
>>
>> So this patch is not related to rebuilding when adding a new event list or
>> dependency checking.
>>
>> Here we are trying to allow the vendor to just specify that an event is
>> supported as standard in their platform, without duplicating all the
>> standard event fields in their JSON. When processing the vendor JSONs, the
>> jevents tool can figure which events are standard and create the proper
>> event entries in the pmu events table, referencing the architecture JSON.
>
Hi jirka,
> I think we should keep this simple and mangle this with some pointer logic
>
> now you have arch/vendor/platform directory structure..
I'm glad that there seems to be no objection to this, as I feel that
this was a problem.
why don't
> you add events for every such directory? I understand there will
> be duplications, but we already have them for other archs and it's
> not big deal:
The amount of duplication was the concern. As mentioned earlier, it
would be anticipated that every vendor would implement these events as
recommended, so a copy for every platform from every vendor. We're
looking for a way to avoid this.
Actually having a scalable JSON standard format for pmu events, which
allows us to define common events per architecture / vendor and
reference them per platform JSON could be useful.
Here we're dealing with trade-off between duplication (simplicity) vs
complexity (or over-engineering).
>
> [jolsa at krava perf]$ grep -r L2_RQSTS.DEMAND_DATA_RD_MISS pmu-events/arch/*
> pmu-events/arch/x86/broadwell/cache.json: "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
> pmu-events/arch/x86/haswell/cache.json: "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
> pmu-events/arch/x86/broadwellde/cache.json: "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
> pmu-events/arch/x86/haswellx/cache.json: "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
> pmu-events/arch/x86/skylake/cache.json: "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
> pmu-events/arch/x86/skylakex/cache.json: "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
> pmu-events/arch/x86/broadwellx/cache.json: "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
>
> thanks,
> jirka
Cheers,
John
>
> .
>
^ permalink raw reply
* [PATCH v1 1/6] ARM: davinci: clean up map_io functions
From: Sekhar Nori @ 2017-12-08 15:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512182054-17410-2-git-send-email-david@lechnology.com>
On Saturday 02 December 2017 08:04 AM, David Lechner wrote:
> static int dm355leopard_mmc_get_cd(int module)
> {
> if (!gpio_is_valid(leopard_mmc_gpio))
> @@ -269,7 +264,7 @@ static __init void dm355_leopard_init(void)
>
> MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
> .atag_offset = 0x100,
> - .map_io = dm355_leopard_map_io,
> + .map_io = dm355_map_io,
> .init_irq = davinci_irq_init,
> .init_time = davinci_timer_init,
> .init_machine = dm355_leopard_init,
It seems like spaces were used in original code for indentation. Can you
please introduce a patch to fix that first since you are now touching
this part of the code?
Thanks,
Sekhar
^ permalink raw reply
* [RFC PATCH 2/5] perf jevents: add support for arch recommended events
From: John Garry @ 2017-12-08 15:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208123137.GF2799@krava>
On 08/12/2017 12:31, Jiri Olsa wrote:
> On Wed, Dec 06, 2017 at 02:40:10PM +0000, John Garry wrote:
>> On 06/12/2017 13:37, Jiri Olsa wrote:
>>> On Wed, Dec 06, 2017 at 12:13:16AM +0800, John Garry wrote:
>>>
>>> SNIP
>>>
>>>> ---
>>>> tools/perf/pmu-events/jevents.c | 215 ++++++++++++++++++++++++++++++++++++----
>>>> 1 file changed, 198 insertions(+), 17 deletions(-)
>>>>
>>>> diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c
>>>> index a0d489e..a820ed4 100644
>>>> --- a/tools/perf/pmu-events/jevents.c
>>>> +++ b/tools/perf/pmu-events/jevents.c
>>>> @@ -42,6 +42,7 @@
>>>> #include <dirent.h>
>>>> #include <sys/time.h> /* getrlimit */
>>>> #include <sys/resource.h> /* getrlimit */
>>>> +#include <sys/queue.h>
>>>> #include <ftw.h>
>>>> #include <sys/stat.h>
>>>> #include "jsmn.h"
>>>> @@ -366,6 +367,94 @@ static int print_events_table_entry(void *data, char *name, char *event,
>>>> return 0;
>>>> }
>>>>
>>>> +struct event_struct {
>>>> + char *name;
>>>> + char *event;
>>>> + char *desc;
>>>> + char *long_desc;
>>>> + char *pmu;
>>>> + char *unit;
>>>> + char *perpkg;
>>>> + char *metric_expr;
>>>> + char *metric_name;
>>>> + char *metric_group;
>>>> + LIST_ENTRY(event_struct) list;
>>>
>>> is there any reason you don't use the 'struct list_head' ?
>>> I dont think we want another thingie involved for lists
>>
>> Hi jirka,
>>
Hi jirka,
>> The linux kernel headers are not used for jevents tool. I would rather use
>> them if possible...
>
> should be as easy as adding #include <linux/list.h> ;-)
>
Hi jirka,
I think the issue is that jevents is a "hostprogs", which does not use
kernel headers.
FWIW, here is the symptom:
pmu-events/jevents.c:51:24: fatal error: linux/list.h: No such file or
directory
#include <linux/list.h>
^
compilation terminated.
mv: cannot stat ?pmu-events/.jevents.o.tmp?: No such file or directory
perf tool build is different.
Much appreciated,
John
> it's heavily used within perf and I'm pretty sure we want
> to keep around just one way of doing lists
>
> thanks,
> jirka
>
> .
>
^ permalink raw reply
* [PATCH v1 1/6] ARM: davinci: clean up map_io functions
From: Sekhar Nori @ 2017-12-08 15:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <2e3b9ef7-b9ee-a6b7-bc67-e3dbd6119f48@lechnology.com>
On Thursday 07 December 2017 10:44 PM, David Lechner wrote:
> On 12/07/2017 08:52 AM, Sekhar Nori wrote:
>> On Saturday 02 December 2017 08:04 AM, David Lechner wrote:
>>> This cleans up the map_io functions in the board init files for
>>> mach-davinci.
>>>
>>> Most of the boards had a wrapper function around <board>_init(). This
>>> wrapper is removed and the function is used directly. Additionally, the
>>> <board>_init() functions are renamed to <board>_map_io() to match the
>>> field name.
>>>
>>> Signed-off-by: David Lechner <david@lechnology.com>
>>
>>> diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c
>>> b/arch/arm/mach-davinci/board-dm646x-evm.c
>>> index cb0a41e..f0e2762 100644
>>> --- a/arch/arm/mach-davinci/board-dm646x-evm.c
>>> +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
>>> @@ -716,16 +716,6 @@ static void __init evm_init_i2c(void)
>>> ? }
>>> ? #endif
>>> ? -#define DM6467T_EVM_REF_FREQ??????? 33000000
>>> -
>>> -static void __init davinci_map_io(void)
>>> -{
>>> -??? dm646x_init();
>>
>> The call to dm646x_init() is dropped here, but I don't see it added
>> back, at least in this patch.
>
> dm646x_init() is renamed to dm646x_map_io(), which is used directly in
> MACHINE_START().
Ah, I missed that. But I think its a symptom of too many things going on
in the patch. How about splitting the patch to:
a) Remove trivial <board>_map_io() wrappers and use <soc>_init()
directly to initialize .map_io
b) Rename <soc>_init() to <soc>_map_io
>
>>
>>> diff --git a/arch/arm/mach-davinci/dm646x.c
>>> b/arch/arm/mach-davinci/dm646x.c
>>> index da21353..b3be5c8 100644
>>> --- a/arch/arm/mach-davinci/dm646x.c
>>> +++ b/arch/arm/mach-davinci/dm646x.c
>>> @@ -17,6 +17,7 @@
>>> ? #include <linux/platform_data/edma.h>
>>> ? #include <linux/platform_data/gpio-davinci.h>
>>> ? +#include <asm/mach-types.h>
>>> ? #include <asm/mach/map.h>
>>> ? ? #include <mach/cputype.h>
>>> @@ -952,11 +953,16 @@ int __init dm646x_init_edma(struct
>>> edma_rsv_info *rsv)
>>> ????? return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
>>> ? }
>>> ? -void __init dm646x_init(void)
>>> +#define DM6467T_EVM_REF_FREQ??????? 33000000
>>> +
>>> +void __init dm646x_map_io(void)
>>> ? {
>>> ????? davinci_common_init(&davinci_soc_info_dm646x);
>>> ????? davinci_map_sysmod();
>>> ????? davinci_clk_init(davinci_soc_info_dm646x.cpu_clks);
>>> +
>>> +??? if (machine_is_davinci_dm6467tevm())
>>> +??????? davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
>>> ? }
>>
>> I think we should leave the DM646x case out of this since there are
>> additional issues like introducing these EVM specific defines in a file
>> meant for SoC.
>
> I agree with the sentiment. This quirk gets moved around several times
> in this series just to keep things working for a git bisect even if it
> is not the ideal place for it to be.
>
> Currently, all boards use a common reference frequency from the common
> SoC files instead of the board file. I have not done so in this version
> of the series, but I could rework it so that this happens, which would
> remove the need for this quirk altogether. But even then, it would
> probably get shuffled around a bit before being eliminated.
We should avoid shuffling and modifying the same code repeatedly if we
can. I think, it will be easier to read if patch 2 and 1 are interchanged.
There is a lot going on and I wasn't sure how that will look so I tried
it briefly and pushed a branch.
Do have a look, but this seems better to me.
https://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git/log/?h=for-davidl
Thanks,
Sekhar
^ permalink raw reply
* [PATCH 0/2] acpi, x86: Add SPCR table support
From: Jeffrey Hugo @ 2017-12-08 15:31 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <f078ada7-1e30-41cc-28dc-077ed2a5986d@redhat.com>
On 12/8/2017 7:29 AM, Prarit Bhargava wrote:
>
>
> On 12/08/2017 01:29 AM, Ingo Molnar wrote:
>>
>> * Prarit Bhargava <prarit@redhat.com> wrote:
>>
>>> The SPCR (Serial Port Console Redirection) Table provides information
>>> about the configuration of serial port. This information can be used
>>> to configure the early console.
>>
>> s/about the configuration of serial port
>> /about the configuration of the serial port
>>
>>> SPCR support was added for arm64 and is made available across all arches
>>> in this patchset. The first patch adds a weak per-arch configuration function
>>> and moves the SPCR code into ACPI. The second patch adds support to x86.
>>>
>>> The existing behaviour on arm64 is maintained. If the SPCR exists the
>>> earlycon and console are automatically configured.
>>
>> s/arm64
>> /ARM64
>>
>> which is easier to read and it's also the prevalent spelling:
>>
>> triton:~/tip> for N in $(git grep -ih arm64 arch/arm64/ | sed 's/[[:punct:]]/ /g'); do echo $N | grep -iw arm64; done | sort | uniq -c
>> 412 arm64
>> 1 Arm64
>> 854 ARM64
>>
>>> The existing default behaviour on x86 is also maintained. If no console or
>>> earlycon parameter is defined and the SPCR exists , the serial port is not
>>> configured. If the earlycon parameter is used both the early console
>>> and the console are configured using the data from the SPCR.
>>
>> s/exists , the
>> /exists, the
>>
>> But, the logic to not use the SPCR looks confusing to me.
>>
>> The SPCR is only present if the user has explicitly configured a serial console
>> for that machine, either in the firmware, or remotely via IPMI, correct? I.e. SPCR
>> will not be spuriously present by default on systems that have a serial console
>> but the user never expressed any interest for them, right?
>
> If I disable "Serial Port Console Debug" in my BIOS I still see the SPCR configured:
>
> [root at prarit-lab ~]# dmesg | grep SPCR
> [ 0.000000] ACPI: SPCR 0x0000000069031000 000050 (v01
> 00000000 00000000)
>
> AFAICT the SPCR is always enabled on some systems.
"Serial Port Console Debug" sounds like DBG2 to me, although I am unsure
of the specific platform you are referencing.
>
>>
>> If so then we should pick up that serial console configuration and activate it,
>> regardless of any kernel boot options!
>
> I'm worried about someone who doesn't want a console on ttyS0 suddenly ending up
> with one. The SPCR could contain incorrect data, etc.
>
> I originally wanted this on by default, but the chances of breaking someone's
> setup seems significant doesn't it? Maybe I'm being too cautious. Anyone else
> want to weigh in? I'm not ignoring your idea Ingo, I'm just worried about being
> yelled at by a user :) because I broke their default console setup.
>
SPCR is always present on QDF2400 (ARM64 platform). Firmware will
automatically update the SPCR table to point to the correct console (IE
Serial-over-LAN or SOL if configured via IPMI). Unless a user
specifically chooses to override the SPCR via "console=", we expect that
a console will be present based on the data in SPCR.
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply
* [PATCH] pinctrl: meson-axg: adjust spicc pin naming
From: Yixun Lan @ 2017-12-08 15:29 UTC (permalink / raw)
To: linux-arm-kernel
According to datasheet, we should use numbers for the pin naming
instead of letters. The patch here try to fix this to keep
the consistency.
This patch should not bring any functional change.
Fixes: 83c566806a68 ("pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC")
Suggested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
The issue was raised by Kevin while review the SPI DT part patches, see [1]
[1] http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005641.html
Note: the 'Fixes' is coming from pinctrl's tree 'for-next' branch
---
drivers/pinctrl/meson/pinctrl-meson-axg.c | 86 +++++++++++++++----------------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg.c b/drivers/pinctrl/meson/pinctrl-meson-axg.c
index a1a7d42afd42..1fda9d6c7ea3 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-axg.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-axg.c
@@ -156,25 +156,25 @@ static const unsigned int sdio_d3_pins[] = {GPIOX_3};
static const unsigned int sdio_clk_pins[] = {GPIOX_4};
static const unsigned int sdio_cmd_pins[] = {GPIOX_5};
-/* spi_a */
-static const unsigned int spi_clk_a_pins[] = {GPIOZ_0};
-static const unsigned int spi_mosi_a_pins[] = {GPIOZ_1};
-static const unsigned int spi_miso_a_pins[] = {GPIOZ_2};
-static const unsigned int spi_ss0_a_pins[] = {GPIOZ_3};
-static const unsigned int spi_ss1_a_pins[] = {GPIOZ_4};
-static const unsigned int spi_ss2_a_pins[] = {GPIOZ_5};
-
-/* spi_b */
-static const unsigned int spi_clk_b_x_pins[] = {GPIOX_19};
-static const unsigned int spi_mosi_b_x_pins[] = {GPIOX_17};
-static const unsigned int spi_miso_b_x_pins[] = {GPIOX_18};
-static const unsigned int spi_ss0_b_x_pins[] = {GPIOX_16};
-
-static const unsigned int spi_clk_b_a_pins[] = {GPIOA_4};
-static const unsigned int spi_mosi_b_a_pins[] = {GPIOA_2};
-static const unsigned int spi_miso_b_a_pins[] = {GPIOA_3};
-static const unsigned int spi_ss0_b_a_pins[] = {GPIOA_5};
-static const unsigned int spi_ss1_b_pins[] = {GPIOA_6};
+/* spi0 */
+static const unsigned int spi0_clk_pins[] = {GPIOZ_0};
+static const unsigned int spi0_mosi_pins[] = {GPIOZ_1};
+static const unsigned int spi0_miso_pins[] = {GPIOZ_2};
+static const unsigned int spi0_ss0_pins[] = {GPIOZ_3};
+static const unsigned int spi0_ss1_pins[] = {GPIOZ_4};
+static const unsigned int spi0_ss2_pins[] = {GPIOZ_5};
+
+/* spi1 */
+static const unsigned int spi1_clk_x_pins[] = {GPIOX_19};
+static const unsigned int spi1_mosi_x_pins[] = {GPIOX_17};
+static const unsigned int spi1_miso_x_pins[] = {GPIOX_18};
+static const unsigned int spi1_ss0_x_pins[] = {GPIOX_16};
+
+static const unsigned int spi1_clk_a_pins[] = {GPIOA_4};
+static const unsigned int spi1_mosi_a_pins[] = {GPIOA_2};
+static const unsigned int spi1_miso_a_pins[] = {GPIOA_3};
+static const unsigned int spi1_ss0_a_pins[] = {GPIOA_5};
+static const unsigned int spi1_ss1_pins[] = {GPIOA_6};
/* i2c0 */
static const unsigned int i2c0_sck_pins[] = {GPIOZ_6};
@@ -429,12 +429,12 @@ static struct meson_pmx_group meson_axg_periphs_groups[] = {
GROUP(nor_cs, 3),
/* bank GPIOZ */
- GROUP(spi_clk_a, 1),
- GROUP(spi_mosi_a, 1),
- GROUP(spi_miso_a, 1),
- GROUP(spi_ss0_a, 1),
- GROUP(spi_ss1_a, 1),
- GROUP(spi_ss2_a, 1),
+ GROUP(spi0_clk, 1),
+ GROUP(spi0_mosi, 1),
+ GROUP(spi0_miso, 1),
+ GROUP(spi0_ss0, 1),
+ GROUP(spi0_ss1, 1),
+ GROUP(spi0_ss2, 1),
GROUP(i2c0_sck, 1),
GROUP(i2c0_sda, 1),
GROUP(i2c1_sck_z, 1),
@@ -475,10 +475,10 @@ static struct meson_pmx_group meson_axg_periphs_groups[] = {
GROUP(jtag_tdi_x, 2),
GROUP(jtag_clk_x, 2),
GROUP(jtag_tms_x, 2),
- GROUP(spi_clk_b_x, 4),
- GROUP(spi_mosi_b_x, 4),
- GROUP(spi_miso_b_x, 4),
- GROUP(spi_ss0_b_x, 4),
+ GROUP(spi1_clk_x, 4),
+ GROUP(spi1_mosi_x, 4),
+ GROUP(spi1_miso_x, 4),
+ GROUP(spi1_ss0_x, 4),
GROUP(pwm_a_x18, 3),
GROUP(pwm_a_x20, 1),
GROUP(pwm_b_x, 3),
@@ -521,11 +521,11 @@ static struct meson_pmx_group meson_axg_periphs_groups[] = {
GROUP(spdif_in_a7, 3),
GROUP(spdif_in_a19, 1),
GROUP(spdif_in_a20, 2),
- GROUP(spi_clk_b_a, 3),
- GROUP(spi_mosi_b_a, 3),
- GROUP(spi_miso_b_a, 3),
- GROUP(spi_ss0_b_a, 3),
- GROUP(spi_ss1_b, 3),
+ GROUP(spi1_clk_a, 3),
+ GROUP(spi1_mosi_a, 3),
+ GROUP(spi1_miso_a, 3),
+ GROUP(spi1_ss0_a, 3),
+ GROUP(spi1_ss1, 3),
GROUP(pwm_a_a, 3),
GROUP(pwm_b_a, 3),
GROUP(pwm_c_a, 3),
@@ -696,15 +696,15 @@ static const char * const sdio_groups[] = {
"sdio_cmd", "sdio_clk",
};
-static const char * const spi_a_groups[] = {
- "spi_clk_a", "spi_mosi_a", "spi_miso_a", "spi_ss0_a",
- "spi_ss1_a", "spi_ss2_a"
+static const char * const spi0_groups[] = {
+ "spi0_clk", "spi0_mosi", "spi0_miso", "spi0_ss0",
+ "spi0_ss1", "spi0_ss2"
};
-static const char * const spi_b_groups[] = {
- "spi_clk_b_x", "spi_mosi_b_x", "spi_miso_b_x", "spi_ss0_b_x",
- "spi_clk_b_a", "spi_mosi_b_a", "spi_miso_b_a", "spi_ss0_b_a",
- "spi_ss1_b"
+static const char * const spi1_groups[] = {
+ "spi1_clk_x", "spi1_mosi_x", "spi1_miso_x", "spi1_ss0_x",
+ "spi1_clk_a", "spi1_mosi_a", "spi1_miso_a", "spi1_ss0_a",
+ "spi1_ss1"
};
static const char * const uart_a_groups[] = {
@@ -849,8 +849,8 @@ static struct meson_pmx_func meson_axg_periphs_functions[] = {
FUNCTION(gpio_periphs),
FUNCTION(emmc),
FUNCTION(nor),
- FUNCTION(spi_a),
- FUNCTION(spi_b),
+ FUNCTION(spi0),
+ FUNCTION(spi1),
FUNCTION(sdio),
FUNCTION(nand),
FUNCTION(uart_a),
--
2.15.1
^ permalink raw reply related
* [PATCH V7 5/7] ACPI: properties: Implement get_match_data() callback
From: Rafael J. Wysocki @ 2017-12-08 14:51 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512681031-11343-6-git-send-email-okaya@codeaurora.org>
On Thu, Dec 7, 2017 at 10:10 PM, Sinan Kaya <okaya@codeaurora.org> wrote:
> Now that we have a get_match_data() callback as part of the firmware node,
> implement the ACPI specific piece for it.
>
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
> drivers/acpi/property.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
> index e26ea20..466d150 100644
> --- a/drivers/acpi/property.c
> +++ b/drivers/acpi/property.c
> @@ -1271,9 +1271,17 @@ static int acpi_fwnode_graph_parse_endpoint(const struct fwnode_handle *fwnode,
> return 0;
> }
>
> +static void *
> +acpi_fwnode_device_get_match_data(const struct fwnode_handle *fwnode,
> + const struct device *dev)
> +{
> + return acpi_get_match_data(dev);
> +}
> +
> #define DECLARE_ACPI_FWNODE_OPS(ops) \
> const struct fwnode_operations ops = { \
> .device_is_available = acpi_fwnode_device_is_available, \
> + .device_get_match_data = acpi_fwnode_device_get_match_data, \
> .property_present = acpi_fwnode_property_present, \
> .property_read_int_array = \
> acpi_fwnode_property_read_int_array, \
> --
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
^ permalink raw reply
* [PATCH V7 2/7] ACPI / bus: Introduce acpi_get_match_data() function
From: Rafael J. Wysocki @ 2017-12-08 14:51 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512681031-11343-3-git-send-email-okaya@codeaurora.org>
On Thu, Dec 7, 2017 at 10:10 PM, Sinan Kaya <okaya@codeaurora.org> wrote:
> OF has of_device_get_match_data() function to extract driver specific data
> structure. Add a similar function for ACPI.
>
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
> drivers/acpi/bus.c | 18 ++++++++++++++++++
> include/linux/acpi.h | 6 ++++++
> 2 files changed, 24 insertions(+)
>
> diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
> index 4d0979e..f87ed3b 100644
> --- a/drivers/acpi/bus.c
> +++ b/drivers/acpi/bus.c
> @@ -785,6 +785,24 @@ const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
> }
> EXPORT_SYMBOL_GPL(acpi_match_device);
>
> +void *acpi_get_match_data(const struct device *dev)
> +{
> + const struct acpi_device_id *match;
> +
> + if (!dev->driver)
> + return NULL;
> +
> + if (!dev->driver->acpi_match_table)
> + return NULL;
You can safely check dev->driver and this in the same statement (as
long as the first check to be made is on the left).
> +
> + match = acpi_match_device(dev->driver->acpi_match_table, dev);
> + if (!match)
> + return NULL;
> +
> + return (void *)match->driver_data;
> +}
> +EXPORT_SYMBOL_GPL(acpi_get_match_data);
> +
> int acpi_match_device_ids(struct acpi_device *device,
> const struct acpi_device_id *ids)
> {
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 502af53..a927260 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -584,6 +584,7 @@ extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
> const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
> const struct device *dev);
>
> +void *acpi_get_match_data(const struct device *dev);
> extern bool acpi_driver_match_device(struct device *dev,
> const struct device_driver *drv);
> int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *);
> @@ -755,6 +756,11 @@ static inline const struct acpi_device_id *acpi_match_device(
> return NULL;
> }
>
> +static inline void *acpi_get_match_data(const struct device *dev)
> +{
> + return NULL;
> +}
> +
> static inline bool acpi_driver_match_device(struct device *dev,
> const struct device_driver *drv)
> {
> --
But anyway
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
^ permalink raw reply
* [PATCH v4 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
From: Yixun Lan @ 2017-12-08 14:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <7ho9nbmked.fsf@baylibre.com>
On 12/07/17 08:50, Kevin Hilman wrote:
> Yixun Lan <yixun.lan@amlogic.com> writes:
>
>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>
>> Try to add Hiubus DT info, and also enable clock DT info
>> for the Amlogic's Meson-AXG SoC.
>>
>> Acked-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +++++++++++++++
>> 1 file changed, 15 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> index b932a784b02a..36a2e98338a8 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> @@ -7,6 +7,7 @@
>> #include <dt-bindings/gpio/gpio.h>
>> #include <dt-bindings/interrupt-controller/irq.h>
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/axg-clkc.h>
>
> This #include will cause an unnessary dependency from the amlogic tree
> to the clock tree even though this patch is not currently using any of
> the #defines from that header. It will simplify the dependencies if you
> drop this #include from this patch.
>
> In my comment on the cover letter, I suggested adding a patch that also
> switches the UART over to the new clock provider. That is the patch
> that should add this #include, since it will actually need #defines from
> the header.
>
ok, make sense
> Doing it in that order means that we could merge this patch
> independently of the clock driver, and then merge the UART switch-over
> patch only after the driver (and headers) are merged.
I was planing to add UART DT part as separately patches (including the
UARt's pinctrl part information)
but as follow your suggestion, I could split the UART's clock DT info
into separate patch, and send along with this series.
>
> Kevin
>
> .
>
^ permalink raw reply
* [PATCH v7 13/13] ASoC: stm32: add DFSDM DAI support
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Add driver to handle DAI interface for PDM microphones connected
to Digital Filter for Sigma Delta Modulators IP.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
V6 to V7 updates:
- SPDX-Licensing.
- Supress workaround in stm32_adfsdm_pcm_new as issue fixed in generic code in recent kernel version.
- Fix kbuild report issue on a log parameter type.
- Suppress test in stm32_adfsdm_set_sysclk on clock direction.
sound/soc/stm/Kconfig | 11 ++
sound/soc/stm/Makefile | 3 +
sound/soc/stm/stm32_adfsdm.c | 351 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 365 insertions(+)
create mode 100644 sound/soc/stm/stm32_adfsdm.c
diff --git a/sound/soc/stm/Kconfig b/sound/soc/stm/Kconfig
index 3398e6c..a78f770 100644
--- a/sound/soc/stm/Kconfig
+++ b/sound/soc/stm/Kconfig
@@ -28,4 +28,15 @@ config SND_SOC_STM32_SPDIFRX
help
Say Y if you want to enable S/PDIF capture for STM32
+config SND_SOC_STM32_DFSDM
+ tristate "SoC Audio support for STM32 DFSDM"
+ depends on (ARCH_STM32 && OF && STM32_DFSDM_ADC) || COMPILE_TEST
+ depends on SND_SOC
+ select SND_SOC_GENERIC_DMAENGINE_PCM
+ select SND_SOC_DMIC
+ select IIO_BUFFER_CB
+ help
+ Select this option to enable the STM32 Digital Filter
+ for Sigma Delta Modulators (DFSDM) driver used
+ in various STM32 series for digital microphone capture.
endmenu
diff --git a/sound/soc/stm/Makefile b/sound/soc/stm/Makefile
index 4ed22e6..53e90e6 100644
--- a/sound/soc/stm/Makefile
+++ b/sound/soc/stm/Makefile
@@ -12,3 +12,6 @@ obj-$(CONFIG_SND_SOC_STM32_I2S) += snd-soc-stm32-i2s.o
# SPDIFRX
snd-soc-stm32-spdifrx-objs := stm32_spdifrx.o
obj-$(CONFIG_SND_SOC_STM32_SPDIFRX) += snd-soc-stm32-spdifrx.o
+
+#DFSDM
+obj-$(CONFIG_SND_SOC_STM32_DFSDM) += stm32_adfsdm.o
diff --git a/sound/soc/stm/stm32_adfsdm.c b/sound/soc/stm/stm32_adfsdm.c
new file mode 100644
index 0000000..eef725e
--- /dev/null
+++ b/sound/soc/stm/stm32_adfsdm.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file is part of STM32 DFSDM ASoC DAI driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Authors: Arnaud Pouliquen <arnaud.pouliquen@st.com>
+ * Olivier Moysan <olivier.moysan@st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/adc/stm32-dfsdm-adc.h>
+
+#include <sound/pcm.h>
+#include <sound/soc.h>
+
+#define STM32_ADFSDM_DRV_NAME "stm32-adfsdm"
+
+#define DFSDM_MAX_PERIOD_SIZE (PAGE_SIZE / 2)
+#define DFSDM_MAX_PERIODS 6
+
+struct stm32_adfsdm_priv {
+ struct snd_soc_dai_driver dai_drv;
+ struct snd_pcm_substream *substream;
+ struct device *dev;
+
+ /* IIO */
+ struct iio_channel *iio_ch;
+ struct iio_cb_buffer *iio_cb;
+ bool iio_active;
+
+ /* PCM buffer */
+ unsigned char *pcm_buff;
+ unsigned int pos;
+};
+
+static const struct snd_pcm_hardware stm32_adfsdm_pcm_hw = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_PAUSE,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+
+ .rate_min = 8000,
+ .rate_max = 32000,
+
+ .channels_min = 1,
+ .channels_max = 1,
+
+ .periods_min = 2,
+ .periods_max = DFSDM_MAX_PERIODS,
+
+ .period_bytes_max = DFSDM_MAX_PERIOD_SIZE,
+ .buffer_bytes_max = DFSDM_MAX_PERIODS * DFSDM_MAX_PERIOD_SIZE
+};
+
+static void stm32_adfsdm_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(dai);
+
+ if (priv->iio_active) {
+ iio_channel_stop_all_cb(priv->iio_cb);
+ priv->iio_active = false;
+ }
+}
+
+static int stm32_adfsdm_dai_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(dai);
+ int ret;
+
+ ret = iio_write_channel_attribute(priv->iio_ch,
+ substream->runtime->rate, 0,
+ IIO_CHAN_INFO_SAMP_FREQ);
+ if (ret < 0) {
+ dev_err(dai->dev, "%s: Failed to set %d sampling rate\n",
+ __func__, substream->runtime->rate);
+ return ret;
+ }
+
+ if (!priv->iio_active) {
+ ret = iio_channel_start_all_cb(priv->iio_cb);
+ if (!ret)
+ priv->iio_active = true;
+ else
+ dev_err(dai->dev, "%s: IIO channel start failed (%d)\n",
+ __func__, ret);
+ }
+
+ return ret;
+}
+
+static int stm32_adfsdm_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(dai);
+ ssize_t size;
+ char str_freq[10];
+
+ dev_dbg(dai->dev, "%s: Enter for freq %d\n", __func__, freq);
+
+ /* Set IIO frequency if CODEC is master as clock comes from SPI_IN*/
+
+ snprintf(str_freq, sizeof(str_freq), "%d\n", freq);
+ size = iio_write_channel_ext_info(priv->iio_ch, "spi_clk_freq",
+ str_freq, sizeof(str_freq));
+ if (size != sizeof(str_freq)) {
+ dev_err(dai->dev, "%s: Failed to set SPI clock\n",
+ __func__);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct snd_soc_dai_ops stm32_adfsdm_dai_ops = {
+ .shutdown = stm32_adfsdm_shutdown,
+ .prepare = stm32_adfsdm_dai_prepare,
+ .set_sysclk = stm32_adfsdm_set_sysclk,
+};
+
+static const struct snd_soc_dai_driver stm32_adfsdm_dai = {
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 1,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
+ SNDRV_PCM_RATE_32000),
+ },
+ .ops = &stm32_adfsdm_dai_ops,
+};
+
+static const struct snd_soc_component_driver stm32_adfsdm_dai_component = {
+ .name = "stm32_dfsdm_audio",
+};
+
+static int stm32_afsdm_pcm_cb(const void *data, size_t size, void *private)
+{
+ struct stm32_adfsdm_priv *priv = private;
+ struct snd_soc_pcm_runtime *rtd = priv->substream->private_data;
+ u8 *pcm_buff = priv->pcm_buff;
+ u8 *src_buff = (u8 *)data;
+ unsigned int buff_size = snd_pcm_lib_buffer_bytes(priv->substream);
+ unsigned int period_size = snd_pcm_lib_period_bytes(priv->substream);
+ unsigned int old_pos = priv->pos;
+ unsigned int cur_size = size;
+
+ dev_dbg(rtd->dev, "%s: buff_add :%p, pos = %d, size = %zu\n",
+ __func__, &pcm_buff[priv->pos], priv->pos, size);
+
+ if ((priv->pos + size) > buff_size) {
+ memcpy(&pcm_buff[priv->pos], src_buff, buff_size - priv->pos);
+ cur_size -= buff_size - priv->pos;
+ priv->pos = 0;
+ }
+
+ memcpy(&pcm_buff[priv->pos], &src_buff[size - cur_size], cur_size);
+ priv->pos = (priv->pos + cur_size) % buff_size;
+
+ if (cur_size != size || (old_pos && (old_pos % period_size < size)))
+ snd_pcm_period_elapsed(priv->substream);
+
+ return 0;
+}
+
+static int stm32_adfsdm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct stm32_adfsdm_priv *priv =
+ snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ priv->pos = 0;
+ return stm32_dfsdm_get_buff_cb(priv->iio_ch->indio_dev,
+ stm32_afsdm_pcm_cb, priv);
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_STOP:
+ return stm32_dfsdm_release_buff_cb(priv->iio_ch->indio_dev);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int stm32_adfsdm_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct stm32_adfsdm_priv *priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+ int ret;
+
+ ret = snd_soc_set_runtime_hwparams(substream, &stm32_adfsdm_pcm_hw);
+ if (!ret)
+ priv->substream = substream;
+
+ return ret;
+}
+
+static int stm32_adfsdm_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct stm32_adfsdm_priv *priv =
+ snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+ snd_pcm_lib_free_pages(substream);
+ priv->substream = NULL;
+
+ return 0;
+}
+
+static snd_pcm_uframes_t stm32_adfsdm_pcm_pointer(
+ struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct stm32_adfsdm_priv *priv =
+ snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+ return bytes_to_frames(substream->runtime, priv->pos);
+}
+
+static int stm32_adfsdm_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct stm32_adfsdm_priv *priv =
+ snd_soc_dai_get_drvdata(rtd->cpu_dai);
+ int ret;
+
+ ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+ if (ret < 0)
+ return ret;
+ priv->pcm_buff = substream->runtime->dma_area;
+
+ return iio_channel_cb_set_buffer_watermark(priv->iio_cb,
+ params_period_size(params));
+}
+
+static int stm32_adfsdm_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ snd_pcm_lib_free_pages(substream);
+
+ return 0;
+}
+
+static struct snd_pcm_ops stm32_adfsdm_pcm_ops = {
+ .open = stm32_adfsdm_pcm_open,
+ .close = stm32_adfsdm_pcm_close,
+ .hw_params = stm32_adfsdm_pcm_hw_params,
+ .hw_free = stm32_adfsdm_pcm_hw_free,
+ .trigger = stm32_adfsdm_trigger,
+ .pointer = stm32_adfsdm_pcm_pointer,
+};
+
+static int stm32_adfsdm_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_pcm *pcm = rtd->pcm;
+ struct stm32_adfsdm_priv *priv =
+ snd_soc_dai_get_drvdata(rtd->cpu_dai);
+ unsigned int size = DFSDM_MAX_PERIODS * DFSDM_MAX_PERIOD_SIZE;
+ int ret;
+
+ ret = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+ priv->dev, size, size);
+ return ret;
+}
+
+static void stm32_adfsdm_pcm_free(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_soc_pcm_runtime *rtd;
+ struct stm32_adfsdm_priv *priv;
+
+ substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+ if (substream) {
+ rtd = substream->private_data;
+ priv = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+ snd_pcm_lib_preallocate_free_for_all(pcm);
+ }
+}
+
+static struct snd_soc_platform_driver stm32_adfsdm_soc_platform = {
+ .ops = &stm32_adfsdm_pcm_ops,
+ .pcm_new = stm32_adfsdm_pcm_new,
+ .pcm_free = stm32_adfsdm_pcm_free,
+};
+
+static const struct of_device_id stm32_adfsdm_of_match[] = {
+ {.compatible = "st,stm32h7-dfsdm-dai"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, stm32_adfsdm_of_match);
+
+static int stm32_adfsdm_probe(struct platform_device *pdev)
+{
+ struct stm32_adfsdm_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+ priv->dai_drv = stm32_adfsdm_dai;
+
+ dev_set_drvdata(&pdev->dev, priv);
+
+ ret = devm_snd_soc_register_component(&pdev->dev,
+ &stm32_adfsdm_dai_component,
+ &priv->dai_drv, 1);
+ if (ret < 0)
+ return ret;
+
+ /* Associate iio channel */
+ priv->iio_ch = devm_iio_channel_get_all(&pdev->dev);
+ if (IS_ERR(priv->iio_ch))
+ return PTR_ERR(priv->iio_ch);
+
+ priv->iio_cb = iio_channel_get_all_cb(&pdev->dev, NULL, NULL);
+ if (IS_ERR(priv->iio_cb))
+ return PTR_ERR(priv->iio_ch);
+
+ ret = devm_snd_soc_register_platform(&pdev->dev,
+ &stm32_adfsdm_soc_platform);
+ if (ret < 0)
+ dev_err(&pdev->dev, "%s: Failed to register PCM platform\n",
+ __func__);
+
+ return ret;
+}
+
+static struct platform_driver stm32_adfsdm_driver = {
+ .driver = {
+ .name = STM32_ADFSDM_DRV_NAME,
+ .of_match_table = stm32_adfsdm_of_match,
+ },
+ .probe = stm32_adfsdm_probe,
+};
+
+module_platform_driver(stm32_adfsdm_driver);
+
+MODULE_DESCRIPTION("stm32 DFSDM DAI driver");
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" STM32_ADFSDM_DRV_NAME);
--
2.7.4
^ permalink raw reply related
* [PATCH v7 12/13] ASoC: add bindings for stm32 DFSDM filter
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Add bindings that describes audio settings to support
Digital Filter for pulse density modulation(PDM) microphone.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
V6 to V7 update:
- Minor update to add missing interrupt-cells in example.
.../devicetree/bindings/sound/st,stm32-adfsdm.txt | 63 ++++++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt b/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt
new file mode 100644
index 0000000..864f5b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt
@@ -0,0 +1,63 @@
+STMicroelectronics Audio Digital Filter Sigma Delta modulators(DFSDM)
+
+The DFSDM allows PDM microphones capture through SPI interface. The Audio
+interface is seems as a sub block of the DFSDM device.
+For details on DFSDM bindings refer to ../iio/adc/st,stm32-dfsdm-adc.txt
+
+Required properties:
+ - compatible: "st,stm32h7-dfsdm-dai".
+
+ - #sound-dai-cells : Must be equal to 0
+
+ - io-channels : phandle to iio dfsdm instance node.
+
+Example of a sound card using audio DFSDM node.
+
+ sound_card {
+ compatible = "audio-graph-card";
+
+ dais = <&cpu_port>;
+ };
+
+ dfsdm: dfsdm at 40017000 {
+ compatible = "st,stm32h7-dfsdm";
+ reg = <0x40017000 0x400>;
+ clocks = <&rcc DFSDM1_CK>;
+ clock-names = "dfsdm";
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dfsdm_adc0: filter at 0 {
+ compatible = "st,stm32-dfsdm-dmic";
+ reg = <0>;
+ interrupts = <110>;
+ dmas = <&dmamux1 101 0x400 0x00>;
+ dma-names = "rx";
+ st,adc-channels = <1>;
+ st,adc-channel-names = "dmic0";
+ st,adc-channel-types = "SPI_R";
+ st,adc-channel-clk-src = "CLKOUT";
+ st,filter-order = <5>;
+
+ dfsdm_dai0: dfsdm-dai {
+ compatible = "st,stm32h7-dfsdm-dai";
+ #sound-dai-cells = <0>;
+ io-channels = <&dfsdm_adc0 0>;
+ cpu_port: port {
+ dfsdm_endpoint: endpoint {
+ remote-endpoint = <&dmic0_endpoint>;
+ };
+ };
+ };
+ };
+
+ dmic0: dmic at 0 {
+ compatible = "dmic-codec";
+ #sound-dai-cells = <0>;
+ port {
+ dmic0_endpoint: endpoint {
+ remote-endpoint = <&dfsdm_endpoint>;
+ };
+ };
+ };
--
2.7.4
^ permalink raw reply related
* [PATCH v7 11/13] IIO: consumer: allow to set buffer sizes
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Add iio consumer API to set buffer size and watermark according
to sysfs API.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/iio/buffer/industrialio-buffer-cb.c | 11 +++++++++++
include/linux/iio/consumer.h | 11 +++++++++++
2 files changed, 22 insertions(+)
diff --git a/drivers/iio/buffer/industrialio-buffer-cb.c b/drivers/iio/buffer/industrialio-buffer-cb.c
index 4847534..ea63c83 100644
--- a/drivers/iio/buffer/industrialio-buffer-cb.c
+++ b/drivers/iio/buffer/industrialio-buffer-cb.c
@@ -104,6 +104,17 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
}
EXPORT_SYMBOL_GPL(iio_channel_get_all_cb);
+int iio_channel_cb_set_buffer_watermark(struct iio_cb_buffer *cb_buff,
+ size_t watermark)
+{
+ if (!watermark)
+ return -EINVAL;
+ cb_buff->buffer.watermark = watermark;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iio_channel_cb_set_buffer_watermark);
+
int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff)
{
return iio_update_buffers(cb_buff->indio_dev, &cb_buff->buffer,
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 2017f35..9887f4f 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -134,6 +134,17 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
void *private),
void *private);
/**
+ * iio_channel_cb_set_buffer_watermark() - set the buffer watermark.
+ * @cb_buffer: The callback buffer from whom we want the channel
+ * information.
+ * @watermark: buffer watermark in bytes.
+ *
+ * This function allows to configure the buffer watermark.
+ */
+int iio_channel_cb_set_buffer_watermark(struct iio_cb_buffer *cb_buffer,
+ size_t watermark);
+
+/**
* iio_channel_release_all_cb() - release and unregister the callback.
* @cb_buffer: The callback buffer that was allocated.
*/
--
2.7.4
^ permalink raw reply related
* [PATCH v7 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
This code offers a way to handle PDM audio microphones in
ASOC framework. Audio driver should use consumer API.
A specific management is implemented for DMA, with a
callback, to allows to handle audio buffers efficiently.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
V6 to V7 updates:
- SPDX-Licensing.
- Minor typo fixes.
.../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 | 16 +
drivers/iio/adc/stm32-dfsdm-adc.c | 508 ++++++++++++++++++++-
include/linux/iio/adc/stm32-dfsdm-adc.h | 18 +
3 files changed, 534 insertions(+), 8 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
new file mode 100644
index 0000000..da98223
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
@@ -0,0 +1,16 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_voltage_spi_clk_freq
+KernelVersion: 4.14
+Contact: arnaud.pouliquen at st.com
+Description:
+ For audio purpose only.
+ Used by audio driver to set/get the spi input frequency.
+ This is mandatory if DFSDM is slave on SPI bus, to
+ provide information on the SPI clock frequency during runtime
+ Notice that the SPI frequency should be a multiple of sample
+ frequency to ensure the precision.
+ if DFSDM input is SPI master
+ Reading SPI clkout frequency,
+ error on writing
+ If DFSDM input is SPI Slave:
+ Reading returns value previously set.
+ Writing value before starting conversions.
\ No newline at end of file
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 68b5920..2d6aed5 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -6,19 +6,25 @@
* Author: Arnaud Pouliquen <arnaud.pouliquen@st.com>.
*/
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/iio/buffer.h>
#include <linux/iio/hw-consumer.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include "stm32-dfsdm.h"
+#define DFSDM_DMA_BUFFER_SIZE (4 * PAGE_SIZE)
+
/* Conversion timeout */
#define DFSDM_TIMEOUT_US 100000
#define DFSDM_TIMEOUT (msecs_to_jiffies(DFSDM_TIMEOUT_US / 1000))
@@ -58,6 +64,18 @@ struct stm32_dfsdm_adc {
struct completion completion;
u32 *buffer;
+ /* Audio specific */
+ unsigned int spi_freq; /* SPI bus clock frequency */
+ unsigned int sample_freq; /* Sample frequency after filter decimation */
+ int (*cb)(const void *data, size_t size, void *cb_priv);
+ void *cb_priv;
+
+ /* DMA */
+ u8 *rx_buf;
+ unsigned int bufi; /* Buffer current position */
+ unsigned int buf_sz; /* Buffer size */
+ struct dma_chan *dma_chan;
+ dma_addr_t dma_buf;
};
struct stm32_dfsdm_str2field {
@@ -351,10 +369,63 @@ int stm32_dfsdm_channel_parse_of(struct stm32_dfsdm *dfsdm,
return 0;
}
+static ssize_t dfsdm_adc_audio_get_spiclk(struct iio_dev *indio_dev,
+ uintptr_t priv,
+ const struct iio_chan_spec *chan,
+ char *buf)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", adc->spi_freq);
+}
+
+static ssize_t dfsdm_adc_audio_set_spiclk(struct iio_dev *indio_dev,
+ uintptr_t priv,
+ const struct iio_chan_spec *chan,
+ const char *buf, size_t len)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
+ struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id];
+ unsigned int sample_freq = adc->sample_freq;
+ unsigned int spi_freq;
+ int ret;
+
+ dev_err(&indio_dev->dev, "enter %s\n", __func__);
+ /* If DFSDM is master on SPI, SPI freq can not be updated */
+ if (ch->src != DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL)
+ return -EPERM;
+
+ ret = kstrtoint(buf, 0, &spi_freq);
+ if (ret)
+ return ret;
+
+ if (!spi_freq)
+ return -EINVAL;
+
+ if (sample_freq) {
+ if (spi_freq % sample_freq)
+ dev_warn(&indio_dev->dev,
+ "Sampling rate not accurate (%d)\n",
+ spi_freq / (spi_freq / sample_freq));
+
+ ret = stm32_dfsdm_set_osrs(fl, 0, (spi_freq / sample_freq));
+ if (ret < 0) {
+ dev_err(&indio_dev->dev,
+ "No filter parameters that match!\n");
+ return ret;
+ }
+ }
+ adc->spi_freq = spi_freq;
+
+ return len;
+}
+
static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, bool dma)
{
struct regmap *regmap = adc->dfsdm->regmap;
int ret;
+ unsigned int dma_en = 0, cont_en = 0;
ret = stm32_dfsdm_start_channel(adc->dfsdm, adc->ch_id);
if (ret < 0)
@@ -365,6 +436,24 @@ static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, bool dma)
if (ret < 0)
goto stop_channels;
+ if (dma) {
+ /* Enable DMA transfer*/
+ dma_en = DFSDM_CR1_RDMAEN(1);
+ /* Enable conversion triggered by SPI clock*/
+ cont_en = DFSDM_CR1_RCONT(1);
+ }
+ /* Enable DMA transfer*/
+ ret = regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+ DFSDM_CR1_RDMAEN_MASK, dma_en);
+ if (ret < 0)
+ goto stop_channels;
+
+ /* Enable conversion triggered by SPI clock*/
+ ret = regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+ DFSDM_CR1_RCONT_MASK, cont_en);
+ if (ret < 0)
+ goto stop_channels;
+
ret = stm32_dfsdm_start_filter(adc->dfsdm, adc->fl_id);
if (ret < 0)
goto stop_channels;
@@ -398,6 +487,231 @@ static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc)
stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id);
}
+static int stm32_dfsdm_set_watermark(struct iio_dev *indio_dev,
+ unsigned int val)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ unsigned int watermark = DFSDM_DMA_BUFFER_SIZE / 2;
+
+ /*
+ * DMA cyclic transfers are used, buffer is split into two periods.
+ * There should be :
+ * - always one buffer (period) DMA is working on
+ * - one buffer (period) driver pushed to ASoC side.
+ */
+ watermark = min(watermark, val * (unsigned int)(sizeof(u32)));
+ adc->buf_sz = watermark * 2;
+
+ return 0;
+}
+
+static unsigned int stm32_dfsdm_adc_dma_residue(struct stm32_dfsdm_adc *adc)
+{
+ struct dma_tx_state state;
+ enum dma_status status;
+
+ status = dmaengine_tx_status(adc->dma_chan,
+ adc->dma_chan->cookie,
+ &state);
+ if (status == DMA_IN_PROGRESS) {
+ /* Residue is size in bytes from end of buffer */
+ unsigned int i = adc->buf_sz - state.residue;
+ unsigned int size;
+
+ /* Return available bytes */
+ if (i >= adc->bufi)
+ size = i - adc->bufi;
+ else
+ size = adc->buf_sz + i - adc->bufi;
+
+ return size;
+ }
+
+ return 0;
+}
+
+static void stm32_dfsdm_audio_dma_buffer_done(void *data)
+{
+ struct iio_dev *indio_dev = data;
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ int available = stm32_dfsdm_adc_dma_residue(adc);
+ size_t old_pos;
+
+ /*
+ * FIXME: In Kernel interface does not support cyclic DMA buffer,and
+ * offers only an interface to push data samples per samples.
+ * For this reason IIO buffer interface is not used and interface is
+ * bypassed using a private callback registered by ASoC.
+ * This should be a temporary solution waiting a cyclic DMA engine
+ * support in IIO.
+ */
+
+ dev_dbg(&indio_dev->dev, "%s: pos = %d, available = %d\n", __func__,
+ adc->bufi, available);
+ old_pos = adc->bufi;
+
+ while (available >= indio_dev->scan_bytes) {
+ u32 *buffer = (u32 *)&adc->rx_buf[adc->bufi];
+
+ /* Mask 8 LSB that contains the channel ID */
+ *buffer = (*buffer & 0xFFFFFF00) << 8;
+ available -= indio_dev->scan_bytes;
+ adc->bufi += indio_dev->scan_bytes;
+ if (adc->bufi >= adc->buf_sz) {
+ if (adc->cb)
+ adc->cb(&adc->rx_buf[old_pos],
+ adc->buf_sz - old_pos, adc->cb_priv);
+ adc->bufi = 0;
+ old_pos = 0;
+ }
+ }
+ if (adc->cb)
+ adc->cb(&adc->rx_buf[old_pos], adc->bufi - old_pos,
+ adc->cb_priv);
+}
+
+static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ struct dma_async_tx_descriptor *desc;
+ dma_cookie_t cookie;
+ int ret;
+
+ if (!adc->dma_chan)
+ return -EINVAL;
+
+ dev_dbg(&indio_dev->dev, "%s size=%d watermark=%d\n", __func__,
+ adc->buf_sz, adc->buf_sz / 2);
+
+ /* Prepare a DMA cyclic transaction */
+ desc = dmaengine_prep_dma_cyclic(adc->dma_chan,
+ adc->dma_buf,
+ adc->buf_sz, adc->buf_sz / 2,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ if (!desc)
+ return -EBUSY;
+
+ desc->callback = stm32_dfsdm_audio_dma_buffer_done;
+ desc->callback_param = indio_dev;
+
+ cookie = dmaengine_submit(desc);
+ ret = dma_submit_error(cookie);
+ if (ret) {
+ dmaengine_terminate_all(adc->dma_chan);
+ return ret;
+ }
+
+ /* Issue pending DMA requests */
+ dma_async_issue_pending(adc->dma_chan);
+
+ return 0;
+}
+
+static int stm32_dfsdm_postenable(struct iio_dev *indio_dev)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ int ret;
+
+ /* Reset adc buffer index */
+ adc->bufi = 0;
+
+ ret = stm32_dfsdm_start_dfsdm(adc->dfsdm);
+ if (ret < 0)
+ return ret;
+
+ ret = stm32_dfsdm_start_conv(adc, true);
+ if (ret) {
+ dev_err(&indio_dev->dev, "Can't start conversion\n");
+ goto stop_dfsdm;
+ }
+
+ if (adc->dma_chan) {
+ ret = stm32_dfsdm_adc_dma_start(indio_dev);
+ if (ret) {
+ dev_err(&indio_dev->dev, "Can't start DMA\n");
+ goto err_stop_conv;
+ }
+ }
+
+ return 0;
+
+err_stop_conv:
+ stm32_dfsdm_stop_conv(adc);
+stop_dfsdm:
+ stm32_dfsdm_stop_dfsdm(adc->dfsdm);
+
+ return ret;
+}
+
+static int stm32_dfsdm_predisable(struct iio_dev *indio_dev)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+
+ if (adc->dma_chan)
+ dmaengine_terminate_all(adc->dma_chan);
+
+ stm32_dfsdm_stop_conv(adc);
+
+ stm32_dfsdm_stop_dfsdm(adc->dfsdm);
+
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops stm32_dfsdm_buffer_setup_ops = {
+ .postenable = &stm32_dfsdm_postenable,
+ .predisable = &stm32_dfsdm_predisable,
+};
+
+/**
+ * stm32_dfsdm_get_buff_cb() - register a callback that will be called when
+ * DMA transfer period is achieved.
+ *
+ * @iio_dev: Handle to IIO device.
+ * @cb: Pointer to callback function:
+ * - data: pointer to data buffer
+ * - size: size in byte of the data buffer
+ * - private: pointer to consumer private structure.
+ * @private: Pointer to consumer private structure.
+ */
+int stm32_dfsdm_get_buff_cb(struct iio_dev *iio_dev,
+ int (*cb)(const void *data, size_t size,
+ void *private),
+ void *private)
+{
+ struct stm32_dfsdm_adc *adc;
+
+ if (!iio_dev)
+ return -EINVAL;
+ adc = iio_priv(iio_dev);
+
+ adc->cb = cb;
+ adc->cb_priv = private;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_get_buff_cb);
+
+/**
+ * stm32_dfsdm_release_buff_cb - unregister buffer callback
+ *
+ * @iio_dev: Handle to IIO device.
+ */
+int stm32_dfsdm_release_buff_cb(struct iio_dev *iio_dev)
+{
+ struct stm32_dfsdm_adc *adc;
+
+ if (!iio_dev)
+ return -EINVAL;
+ adc = iio_priv(iio_dev);
+
+ adc->cb = NULL;
+ adc->cb_priv = NULL;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_release_buff_cb);
+
static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, int *res)
{
@@ -453,15 +767,41 @@ static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev,
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
+ struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id];
+ unsigned int spi_freq = adc->spi_freq;
int ret = -EINVAL;
- if (mask == IIO_CHAN_INFO_OVERSAMPLING_RATIO) {
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
ret = stm32_dfsdm_set_osrs(fl, 0, val);
if (!ret)
adc->oversamp = val;
+
+ return ret;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ if (!val)
+ return -EINVAL;
+ if (ch->src != DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL)
+ spi_freq = adc->dfsdm->spi_master_freq;
+
+ if (spi_freq % val)
+ dev_warn(&indio_dev->dev,
+ "Sampling rate not accurate (%d)\n",
+ spi_freq / (spi_freq / val));
+
+ ret = stm32_dfsdm_set_osrs(fl, 0, (spi_freq / val));
+ if (ret < 0) {
+ dev_err(&indio_dev->dev,
+ "Not able to find parameter that match!\n");
+ return ret;
+ }
+ adc->sample_freq = val;
+
+ return 0;
}
- return ret;
+ return -EINVAL;
}
static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
@@ -494,11 +834,22 @@ static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
*val = adc->oversamp;
return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = adc->sample_freq;
+
+ return IIO_VAL_INT;
}
return -EINVAL;
}
+static const struct iio_info stm32_dfsdm_info_audio = {
+ .hwfifo_set_watermark = stm32_dfsdm_set_watermark,
+ .read_raw = stm32_dfsdm_read_raw,
+ .write_raw = stm32_dfsdm_write_raw,
+};
+
static const struct iio_info stm32_dfsdm_info_adc = {
.read_raw = stm32_dfsdm_read_raw,
.write_raw = stm32_dfsdm_write_raw,
@@ -531,6 +882,60 @@ static irqreturn_t stm32_dfsdm_irq(int irq, void *arg)
return IRQ_HANDLED;
}
+/*
+ * Define external info for SPI Frequency and audio sampling rate that can be
+ * configured by ASoC driver through consumer.h API
+ */
+static const struct iio_chan_spec_ext_info dfsdm_adc_audio_ext_info[] = {
+ /* spi_clk_freq : clock freq on SPI/manchester bus used by channel */
+ {
+ .name = "spi_clk_freq",
+ .shared = IIO_SHARED_BY_TYPE,
+ .read = dfsdm_adc_audio_get_spiclk,
+ .write = dfsdm_adc_audio_set_spiclk,
+ },
+ {},
+};
+
+static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ struct dma_slave_config config;
+ int ret;
+
+ adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
+ if (!adc->dma_chan)
+ return -EINVAL;
+
+ adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev,
+ DFSDM_DMA_BUFFER_SIZE,
+ &adc->dma_buf, GFP_KERNEL);
+ if (!adc->rx_buf) {
+ ret = -ENOMEM;
+ goto err_release;
+ }
+
+ /* Configure DMA channel to read data register */
+ memset(&config, 0, sizeof(config));
+ config.src_addr = (dma_addr_t)adc->dfsdm->phys_base;
+ config.src_addr += DFSDM_RDATAR(adc->fl_id);
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+ ret = dmaengine_slave_config(adc->dma_chan, &config);
+ if (ret)
+ goto err_free;
+
+ return 0;
+
+err_free:
+ dma_free_coherent(adc->dma_chan->device->dev, DFSDM_DMA_BUFFER_SIZE,
+ adc->rx_buf, adc->dma_buf);
+err_release:
+ dma_release_channel(adc->dma_chan);
+
+ return ret;
+}
+
static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
struct iio_chan_spec *ch)
{
@@ -551,7 +956,12 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
ch->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
ch->info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO);
- ch->scan_type.sign = 'u';
+ if (adc->dev_data->type == DFSDM_AUDIO) {
+ ch->scan_type.sign = 's';
+ ch->ext_info = dfsdm_adc_audio_ext_info;
+ } else {
+ ch->scan_type.sign = 'u';
+ }
ch->scan_type.realbits = 24;
ch->scan_type.storagebits = 32;
adc->ch_id = ch->channel;
@@ -560,6 +970,64 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
&adc->dfsdm->ch_list[ch->channel]);
}
+static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
+{
+ struct iio_chan_spec *ch;
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ struct stm32_dfsdm_channel *d_ch;
+ int ret;
+
+ ret = stm32_dfsdm_dma_request(indio_dev);
+ if (ret) {
+ dev_err(&indio_dev->dev, "DMA request failed\n");
+ return ret;
+ }
+
+ indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
+
+ ret = iio_triggered_buffer_setup(indio_dev,
+ &iio_pollfunc_store_time,
+ NULL,
+ &stm32_dfsdm_buffer_setup_ops);
+ if (ret) {
+ dev_err(&indio_dev->dev, "Buffer setup failed\n");
+ goto err_dma_disable;
+ }
+
+ ch = devm_kzalloc(&indio_dev->dev, sizeof(*ch), GFP_KERNEL);
+ if (!ch)
+ return -ENOMEM;
+
+ ch->scan_index = 0;
+ ret = stm32_dfsdm_adc_chan_init_one(indio_dev, ch);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev, "channels init failed\n");
+ goto err_buffer_cleanup;
+ }
+ ch->info_mask_separate = BIT(IIO_CHAN_INFO_SAMP_FREQ);
+
+ d_ch = &adc->dfsdm->ch_list[adc->ch_id];
+ if (d_ch->src != DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL)
+ adc->spi_freq = adc->dfsdm->spi_master_freq;
+
+ indio_dev->num_channels = 1;
+ indio_dev->channels = ch;
+
+ return 0;
+
+err_buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
+
+err_dma_disable:
+ if (adc->dma_chan) {
+ dma_free_coherent(adc->dma_chan->device->dev,
+ DFSDM_DMA_BUFFER_SIZE,
+ adc->rx_buf, adc->dma_buf);
+ dma_release_channel(adc->dma_chan);
+ }
+ return ret;
+}
+
static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
{
struct iio_chan_spec *ch;
@@ -612,11 +1080,20 @@ static const struct stm32_dfsdm_dev_data stm32h7_dfsdm_adc_data = {
.init = stm32_dfsdm_adc_init,
};
+static const struct stm32_dfsdm_dev_data stm32h7_dfsdm_audio_data = {
+ .type = DFSDM_AUDIO,
+ .init = stm32_dfsdm_audio_init,
+};
+
static const struct of_device_id stm32_dfsdm_adc_match[] = {
{
.compatible = "st,stm32-dfsdm-adc",
.data = &stm32h7_dfsdm_adc_data,
},
+ {
+ .compatible = "st,stm32-dfsdm-dmic",
+ .data = &stm32h7_dfsdm_audio_data,
+ },
{}
};
@@ -667,8 +1144,13 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
name = devm_kzalloc(dev, sizeof("dfsdm-adc0"), GFP_KERNEL);
if (!name)
return -ENOMEM;
- iio->info = &stm32_dfsdm_info_adc;
- snprintf(name, sizeof("dfsdm-adc0"), "dfsdm-adc%d", adc->fl_id);
+ if (dev_data->type == DFSDM_AUDIO) {
+ iio->info = &stm32_dfsdm_info_audio;
+ snprintf(name, sizeof("dfsdm-pdm0"), "dfsdm-pdm%d", adc->fl_id);
+ } else {
+ iio->info = &stm32_dfsdm_info_adc;
+ snprintf(name, sizeof("dfsdm-adc0"), "dfsdm-adc%d", adc->fl_id);
+ }
iio->name = name;
/*
@@ -700,7 +1182,10 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- return iio_device_register(iio);
+ iio_device_register(iio);
+ if (dev_data->type == DFSDM_AUDIO)
+ return devm_of_platform_populate(&pdev->dev);
+ return 0;
}
static int stm32_dfsdm_adc_remove(struct platform_device *pdev)
@@ -709,7 +1194,14 @@ static int stm32_dfsdm_adc_remove(struct platform_device *pdev)
struct iio_dev *indio_dev = iio_priv_to_dev(adc);
iio_device_unregister(indio_dev);
-
+ if (indio_dev->pollfunc)
+ iio_triggered_buffer_cleanup(indio_dev);
+ if (adc->dma_chan) {
+ dma_free_coherent(adc->dma_chan->device->dev,
+ DFSDM_DMA_BUFFER_SIZE,
+ adc->rx_buf, adc->dma_buf);
+ dma_release_channel(adc->dma_chan);
+ }
return 0;
}
diff --git a/include/linux/iio/adc/stm32-dfsdm-adc.h b/include/linux/iio/adc/stm32-dfsdm-adc.h
new file mode 100644
index 0000000..e7dc7a5
--- /dev/null
+++ b/include/linux/iio/adc/stm32-dfsdm-adc.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file discribe the STM32 DFSDM IIO driver API for audio part
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Arnaud Pouliquen <arnaud.pouliquen@st.com>.
+ */
+
+#ifndef STM32_DFSDM_ADC_H
+#define STM32_DFSDM_ADC_H
+
+int stm32_dfsdm_get_buff_cb(struct iio_dev *iio_dev,
+ int (*cb)(const void *data, size_t size,
+ void *private),
+ void *private);
+int stm32_dfsdm_release_buff_cb(struct iio_dev *iio_dev);
+
+#endif
--
2.7.4
^ permalink raw reply related
* [PATCH v7 09/13] IIO: ADC: add STM32 DFSDM sigma delta ADC support
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Add DFSDM driver to handle sigma delta ADC.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
V6 to V7 updates:
- SPDX-Licensing.
- Minor typo fixes.
drivers/iio/adc/Kconfig | 13 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/stm32-dfsdm-adc.c | 728 ++++++++++++++++++++++++++++++++++++++
3 files changed, 742 insertions(+)
create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index b729ae0..98ca30b 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -677,6 +677,19 @@ config STM32_DFSDM_CORE
This driver can also be built as a module. If so, the module
will be called stm32-dfsdm-core.
+config STM32_DFSDM_ADC
+ tristate "STMicroelectronics STM32 dfsdm adc"
+ depends on (ARCH_STM32 && OF) || COMPILE_TEST
+ select STM32_DFSDM_CORE
+ select REGMAP_MMIO
+ select IIO_BUFFER_HW_CONSUMER
+ help
+ Select this option to support ADCSigma delta modulator for
+ STMicroelectronics STM32 digital filter for sigma delta converter.
+
+ This driver can also be built as a module. If so, the module
+ will be called stm32-dfsdm-adc.
+
config STX104
tristate "Apex Embedded Systems STX104 driver"
depends on PC104 && X86 && ISA_BUS_API
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index b52d0a0..c4f5d15 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
obj-$(CONFIG_STM32_ADC) += stm32-adc.o
obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o
+obj-$(CONFIG_STM32_DFSDM_ADC) += stm32-dfsdm-adc.o
obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
new file mode 100644
index 0000000..68b5920
--- /dev/null
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -0,0 +1,728 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file is the ADC part of the STM32 DFSDM driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author: Arnaud Pouliquen <arnaud.pouliquen@st.com>.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/hw-consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "stm32-dfsdm.h"
+
+/* Conversion timeout */
+#define DFSDM_TIMEOUT_US 100000
+#define DFSDM_TIMEOUT (msecs_to_jiffies(DFSDM_TIMEOUT_US / 1000))
+
+/* Oversampling attribute default */
+#define DFSDM_DEFAULT_OVERSAMPLING 100
+
+/* Oversampling max values */
+#define DFSDM_MAX_INT_OVERSAMPLING 256
+#define DFSDM_MAX_FL_OVERSAMPLING 1024
+
+/* Max sample resolutions */
+#define DFSDM_MAX_RES BIT(31)
+#define DFSDM_DATA_RES BIT(23)
+
+enum sd_converter_type {
+ DFSDM_AUDIO,
+ DFSDM_IIO,
+};
+
+struct stm32_dfsdm_dev_data {
+ int type;
+ int (*init)(struct iio_dev *indio_dev);
+ unsigned int num_channels;
+ const struct regmap_config *regmap_cfg;
+};
+
+struct stm32_dfsdm_adc {
+ struct stm32_dfsdm *dfsdm;
+ const struct stm32_dfsdm_dev_data *dev_data;
+ unsigned int fl_id;
+ unsigned int ch_id;
+
+ /* ADC specific */
+ unsigned int oversamp;
+ struct iio_hw_consumer *hwc;
+ struct completion completion;
+ u32 *buffer;
+
+};
+
+struct stm32_dfsdm_str2field {
+ const char *name;
+ unsigned int val;
+};
+
+/* DFSDM channel serial interface type */
+static const struct stm32_dfsdm_str2field stm32_dfsdm_chan_type[] = {
+ { "SPI_R", 0 }, /* SPI with data on rising edge */
+ { "SPI_F", 1 }, /* SPI with data on falling edge */
+ { "MANCH_R", 2 }, /* Manchester codec, rising edge = logic 0 */
+ { "MANCH_F", 3 }, /* Manchester codec, falling edge = logic 1 */
+ {},
+};
+
+/* DFSDM channel clock source */
+static const struct stm32_dfsdm_str2field stm32_dfsdm_chan_src[] = {
+ /* External SPI clock (CLKIN x) */
+ { "CLKIN", DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL },
+ /* Internal SPI clock (CLKOUT) */
+ { "CLKOUT", DFSDM_CHANNEL_SPI_CLOCK_INTERNAL },
+ /* Internal SPI clock divided by 2 (falling edge) */
+ { "CLKOUT_F", DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING },
+ /* Internal SPI clock divided by 2 (falling edge) */
+ { "CLKOUT_R", DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING },
+ {},
+};
+
+static int stm32_dfsdm_str2val(const char *str,
+ const struct stm32_dfsdm_str2field *list)
+{
+ const struct stm32_dfsdm_str2field *p = list;
+
+ for (p = list; p && p->name; p++)
+ if (!strcmp(p->name, str))
+ return p->val;
+
+ return -EINVAL;
+}
+
+static int stm32_dfsdm_set_osrs(struct stm32_dfsdm_filter *fl,
+ unsigned int fast, unsigned int oversamp)
+{
+ unsigned int i, d, fosr, iosr;
+ u64 res;
+ s64 delta;
+ unsigned int m = 1; /* multiplication factor */
+ unsigned int p = fl->ford; /* filter order (ford) */
+
+ pr_debug("%s: Requested oversampling: %d\n", __func__, oversamp);
+ /*
+ * This function tries to compute filter oversampling and integrator
+ * oversampling, base on oversampling ratio requested by user.
+ *
+ * Decimation d depends on the filter order and the oversampling ratios.
+ * ford: filter order
+ * fosr: filter over sampling ratio
+ * iosr: integrator over sampling ratio
+ */
+ if (fl->ford == DFSDM_FASTSINC_ORDER) {
+ m = 2;
+ p = 2;
+ }
+
+ /*
+ * Look for filter and integrator oversampling ratios which allows
+ * to reach 24 bits data output resolution.
+ * Leave as soon as if exact resolution if reached.
+ * Otherwise the higher resolution below 32 bits is kept.
+ */
+ for (fosr = 1; fosr <= DFSDM_MAX_FL_OVERSAMPLING; fosr++) {
+ for (iosr = 1; iosr <= DFSDM_MAX_INT_OVERSAMPLING; iosr++) {
+ if (fast)
+ d = fosr * iosr;
+ else if (fl->ford == DFSDM_FASTSINC_ORDER)
+ d = fosr * (iosr + 3) + 2;
+ else
+ d = fosr * (iosr - 1 + p) + p;
+
+ if (d > oversamp)
+ break;
+ else if (d != oversamp)
+ continue;
+ /*
+ * Check resolution (limited to signed 32 bits)
+ * res <= 2^31
+ * Sincx filters:
+ * res = m * fosr^p x iosr (with m=1, p=ford)
+ * FastSinc filter
+ * res = m * fosr^p x iosr (with m=2, p=2)
+ */
+ res = fosr;
+ for (i = p - 1; i > 0; i--) {
+ res = res * (u64)fosr;
+ if (res > DFSDM_MAX_RES)
+ break;
+ }
+ if (res > DFSDM_MAX_RES)
+ continue;
+ res = res * (u64)m * (u64)iosr;
+ if (res > DFSDM_MAX_RES)
+ continue;
+
+ delta = res - DFSDM_DATA_RES;
+
+ if (res >= fl->res) {
+ fl->res = res;
+ fl->fosr = fosr;
+ fl->iosr = iosr;
+ fl->fast = fast;
+ pr_debug("%s: fosr = %d, iosr = %d\n",
+ __func__, fl->fosr, fl->iosr);
+ }
+
+ if (!delta)
+ return 0;
+ }
+ }
+
+ if (!fl->fosr)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int stm32_dfsdm_start_channel(struct stm32_dfsdm *dfsdm,
+ unsigned int ch_id)
+{
+ return regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(ch_id),
+ DFSDM_CHCFGR1_CHEN_MASK,
+ DFSDM_CHCFGR1_CHEN(1));
+}
+
+static void stm32_dfsdm_stop_channel(struct stm32_dfsdm *dfsdm,
+ unsigned int ch_id)
+{
+ regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(ch_id),
+ DFSDM_CHCFGR1_CHEN_MASK, DFSDM_CHCFGR1_CHEN(0));
+}
+
+static int stm32_dfsdm_chan_configure(struct stm32_dfsdm *dfsdm,
+ struct stm32_dfsdm_channel *ch)
+{
+ unsigned int id = ch->id;
+ struct regmap *regmap = dfsdm->regmap;
+ int ret;
+
+ ret = regmap_update_bits(regmap, DFSDM_CHCFGR1(id),
+ DFSDM_CHCFGR1_SITP_MASK,
+ DFSDM_CHCFGR1_SITP(ch->type));
+ if (ret < 0)
+ return ret;
+ ret = regmap_update_bits(regmap, DFSDM_CHCFGR1(id),
+ DFSDM_CHCFGR1_SPICKSEL_MASK,
+ DFSDM_CHCFGR1_SPICKSEL(ch->src));
+ if (ret < 0)
+ return ret;
+ return regmap_update_bits(regmap, DFSDM_CHCFGR1(id),
+ DFSDM_CHCFGR1_CHINSEL_MASK,
+ DFSDM_CHCFGR1_CHINSEL(ch->alt_si));
+}
+
+static int stm32_dfsdm_start_filter(struct stm32_dfsdm *dfsdm,
+ unsigned int fl_id)
+{
+ int ret;
+
+ /* Enable filter */
+ ret = regmap_update_bits(dfsdm->regmap, DFSDM_CR1(fl_id),
+ DFSDM_CR1_DFEN_MASK, DFSDM_CR1_DFEN(1));
+ if (ret < 0)
+ return ret;
+
+ /* Start conversion */
+ return regmap_update_bits(dfsdm->regmap, DFSDM_CR1(fl_id),
+ DFSDM_CR1_RSWSTART_MASK,
+ DFSDM_CR1_RSWSTART(1));
+}
+
+void stm32_dfsdm_stop_filter(struct stm32_dfsdm *dfsdm, unsigned int fl_id)
+{
+ /* Disable conversion */
+ regmap_update_bits(dfsdm->regmap, DFSDM_CR1(fl_id),
+ DFSDM_CR1_DFEN_MASK, DFSDM_CR1_DFEN(0));
+}
+
+static int stm32_dfsdm_filter_configure(struct stm32_dfsdm *dfsdm,
+ unsigned int fl_id, unsigned int ch_id)
+{
+ struct regmap *regmap = dfsdm->regmap;
+ struct stm32_dfsdm_filter *fl = &dfsdm->fl_list[fl_id];
+ int ret;
+
+ /* Average integrator oversampling */
+ ret = regmap_update_bits(regmap, DFSDM_FCR(fl_id), DFSDM_FCR_IOSR_MASK,
+ DFSDM_FCR_IOSR(fl->iosr - 1));
+ if (ret)
+ return ret;
+
+ /* Filter order and Oversampling */
+ ret = regmap_update_bits(regmap, DFSDM_FCR(fl_id), DFSDM_FCR_FOSR_MASK,
+ DFSDM_FCR_FOSR(fl->fosr - 1));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(regmap, DFSDM_FCR(fl_id), DFSDM_FCR_FORD_MASK,
+ DFSDM_FCR_FORD(fl->ford));
+ if (ret)
+ return ret;
+
+ /* No scan mode supported for the moment */
+ ret = regmap_update_bits(regmap, DFSDM_CR1(fl_id), DFSDM_CR1_RCH_MASK,
+ DFSDM_CR1_RCH(ch_id));
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(regmap, DFSDM_CR1(fl_id),
+ DFSDM_CR1_RSYNC_MASK,
+ DFSDM_CR1_RSYNC(fl->sync_mode));
+}
+
+int stm32_dfsdm_channel_parse_of(struct stm32_dfsdm *dfsdm,
+ struct iio_dev *indio_dev,
+ struct iio_chan_spec *ch)
+{
+ struct stm32_dfsdm_channel *df_ch;
+ const char *of_str;
+ int chan_idx = ch->scan_index;
+ int ret, val;
+
+ ret = of_property_read_u32_index(indio_dev->dev.of_node,
+ "st,adc-channels", chan_idx,
+ &ch->channel);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev,
+ " Error parsing 'st,adc-channels' for idx %d\n",
+ chan_idx);
+ return ret;
+ }
+ if (ch->channel >= dfsdm->num_chs) {
+ dev_err(&indio_dev->dev,
+ " Error bad channel number %d (max = %d)\n",
+ ch->channel, dfsdm->num_chs);
+ return -EINVAL;
+ }
+
+ ret = of_property_read_string_index(indio_dev->dev.of_node,
+ "st,adc-channel-names", chan_idx,
+ &ch->datasheet_name);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev,
+ " Error parsing 'st,adc-channel-names' for idx %d\n",
+ chan_idx);
+ return ret;
+ }
+
+ df_ch = &dfsdm->ch_list[ch->channel];
+ df_ch->id = ch->channel;
+
+ ret = of_property_read_string_index(indio_dev->dev.of_node,
+ "st,adc-channel-types", chan_idx,
+ &of_str);
+ if (!ret) {
+ val = stm32_dfsdm_str2val(of_str, stm32_dfsdm_chan_type);
+ if (val < 0)
+ return val;
+ } else {
+ val = 0;
+ }
+ df_ch->type = val;
+
+ ret = of_property_read_string_index(indio_dev->dev.of_node,
+ "st,adc-channel-clk-src", chan_idx,
+ &of_str);
+ if (!ret) {
+ val = stm32_dfsdm_str2val(of_str, stm32_dfsdm_chan_src);
+ if (val < 0)
+ return val;
+ } else {
+ val = 0;
+ }
+ df_ch->src = val;
+
+ ret = of_property_read_u32_index(indio_dev->dev.of_node,
+ "st,adc-alt-channel", chan_idx,
+ &df_ch->alt_si);
+ if (ret < 0)
+ df_ch->alt_si = 0;
+
+ return 0;
+}
+
+static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, bool dma)
+{
+ struct regmap *regmap = adc->dfsdm->regmap;
+ int ret;
+
+ ret = stm32_dfsdm_start_channel(adc->dfsdm, adc->ch_id);
+ if (ret < 0)
+ return ret;
+
+ ret = stm32_dfsdm_filter_configure(adc->dfsdm, adc->fl_id,
+ adc->ch_id);
+ if (ret < 0)
+ goto stop_channels;
+
+ ret = stm32_dfsdm_start_filter(adc->dfsdm, adc->fl_id);
+ if (ret < 0)
+ goto stop_channels;
+
+ return 0;
+
+stop_channels:
+ regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+ DFSDM_CR1_RDMAEN_MASK, 0);
+
+ regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+ DFSDM_CR1_RCONT_MASK, 0);
+ stm32_dfsdm_stop_channel(adc->dfsdm, adc->fl_id);
+
+ return ret;
+}
+
+static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc)
+{
+ struct regmap *regmap = adc->dfsdm->regmap;
+
+ stm32_dfsdm_stop_filter(adc->dfsdm, adc->fl_id);
+
+ /* Clean conversion options */
+ regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+ DFSDM_CR1_RDMAEN_MASK, 0);
+
+ regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
+ DFSDM_CR1_RCONT_MASK, 0);
+
+ stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id);
+}
+
+static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, int *res)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ long timeout;
+ int ret;
+
+ reinit_completion(&adc->completion);
+
+ adc->buffer = res;
+
+ ret = stm32_dfsdm_start_dfsdm(adc->dfsdm);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id),
+ DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(1));
+ if (ret < 0)
+ goto stop_dfsdm;
+
+ ret = stm32_dfsdm_start_conv(adc, false);
+ if (ret < 0) {
+ regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id),
+ DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(0));
+ goto stop_dfsdm;
+ }
+
+ timeout = wait_for_completion_interruptible_timeout(&adc->completion,
+ DFSDM_TIMEOUT);
+
+ /* Mask IRQ for regular conversion achievement*/
+ regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id),
+ DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(0));
+
+ if (timeout == 0)
+ ret = -ETIMEDOUT;
+ else if (timeout < 0)
+ ret = timeout;
+ else
+ ret = IIO_VAL_INT;
+
+ stm32_dfsdm_stop_conv(adc);
+
+stop_dfsdm:
+ stm32_dfsdm_stop_dfsdm(adc->dfsdm);
+
+ return ret;
+}
+
+static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
+ int ret = -EINVAL;
+
+ if (mask == IIO_CHAN_INFO_OVERSAMPLING_RATIO) {
+ ret = stm32_dfsdm_set_osrs(fl, 0, val);
+ if (!ret)
+ adc->oversamp = val;
+ }
+
+ return ret;
+}
+
+static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = iio_hw_consumer_enable(adc->hwc);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev,
+ "%s: IIO enable failed (channel %d)\n",
+ __func__, chan->channel);
+ return ret;
+ }
+ ret = stm32_dfsdm_single_conv(indio_dev, chan, val);
+ iio_hw_consumer_disable(adc->hwc);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev,
+ "%s: Conversion failed (channel %d)\n",
+ __func__, chan->channel);
+ return ret;
+ }
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *val = adc->oversamp;
+
+ return IIO_VAL_INT;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info stm32_dfsdm_info_adc = {
+ .read_raw = stm32_dfsdm_read_raw,
+ .write_raw = stm32_dfsdm_write_raw,
+};
+
+static irqreturn_t stm32_dfsdm_irq(int irq, void *arg)
+{
+ struct stm32_dfsdm_adc *adc = arg;
+ struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+ struct regmap *regmap = adc->dfsdm->regmap;
+ unsigned int status, int_en;
+
+ regmap_read(regmap, DFSDM_ISR(adc->fl_id), &status);
+ regmap_read(regmap, DFSDM_CR2(adc->fl_id), &int_en);
+
+ if (status & DFSDM_ISR_REOCF_MASK) {
+ /* Read the data register clean the IRQ status */
+ regmap_read(regmap, DFSDM_RDATAR(adc->fl_id), adc->buffer);
+ complete(&adc->completion);
+ }
+
+ if (status & DFSDM_ISR_ROVRF_MASK) {
+ if (int_en & DFSDM_CR2_ROVRIE_MASK)
+ dev_warn(&indio_dev->dev, "Overrun detected\n");
+ regmap_update_bits(regmap, DFSDM_ICR(adc->fl_id),
+ DFSDM_ICR_CLRROVRF_MASK,
+ DFSDM_ICR_CLRROVRF_MASK);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
+ struct iio_chan_spec *ch)
+{
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ int ret;
+
+ ret = stm32_dfsdm_channel_parse_of(adc->dfsdm, indio_dev, ch);
+ if (ret < 0)
+ return ret;
+
+ ch->type = IIO_VOLTAGE;
+ ch->indexed = 1;
+
+ /*
+ * IIO_CHAN_INFO_RAW: used to compute regular conversion
+ * IIO_CHAN_INFO_OVERSAMPLING_RATIO: used to set oversampling
+ */
+ ch->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+ ch->info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO);
+
+ ch->scan_type.sign = 'u';
+ ch->scan_type.realbits = 24;
+ ch->scan_type.storagebits = 32;
+ adc->ch_id = ch->channel;
+
+ return stm32_dfsdm_chan_configure(adc->dfsdm,
+ &adc->dfsdm->ch_list[ch->channel]);
+}
+
+static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
+{
+ struct iio_chan_spec *ch;
+ struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ int num_ch;
+ int ret, chan_idx;
+
+ adc->oversamp = DFSDM_DEFAULT_OVERSAMPLING;
+ ret = stm32_dfsdm_set_osrs(&adc->dfsdm->fl_list[adc->fl_id], 0,
+ adc->oversamp);
+ if (ret < 0)
+ return ret;
+
+ num_ch = of_property_count_u32_elems(indio_dev->dev.of_node,
+ "st,adc-channels");
+ if (num_ch < 0 || num_ch > adc->dfsdm->num_chs) {
+ dev_err(&indio_dev->dev, "Bad st,adc-channels\n");
+ return num_ch < 0 ? num_ch : -EINVAL;
+ }
+
+ /* Bind to SD modulator IIO device */
+ adc->hwc = devm_iio_hw_consumer_alloc(&indio_dev->dev);
+ if (IS_ERR(adc->hwc))
+ return -EPROBE_DEFER;
+
+ ch = devm_kcalloc(&indio_dev->dev, num_ch, sizeof(*ch),
+ GFP_KERNEL);
+ if (!ch)
+ return -ENOMEM;
+
+ for (chan_idx = 0; chan_idx < num_ch; chan_idx++) {
+ ch->scan_index = chan_idx;
+ ret = stm32_dfsdm_adc_chan_init_one(indio_dev, ch);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev, "Channels init failed\n");
+ return ret;
+ }
+ }
+
+ indio_dev->num_channels = num_ch;
+ indio_dev->channels = ch;
+
+ init_completion(&adc->completion);
+
+ return 0;
+}
+
+static const struct stm32_dfsdm_dev_data stm32h7_dfsdm_adc_data = {
+ .type = DFSDM_IIO,
+ .init = stm32_dfsdm_adc_init,
+};
+
+static const struct of_device_id stm32_dfsdm_adc_match[] = {
+ {
+ .compatible = "st,stm32-dfsdm-adc",
+ .data = &stm32h7_dfsdm_adc_data,
+ },
+ {}
+};
+
+static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct stm32_dfsdm_adc *adc;
+ struct device_node *np = dev->of_node;
+ const struct stm32_dfsdm_dev_data *dev_data;
+ struct iio_dev *iio;
+ const struct of_device_id *of_id;
+ char *name;
+ int ret, irq, val;
+
+ of_id = of_match_node(stm32_dfsdm_adc_match, np);
+ if (!of_id->data) {
+ dev_err(&pdev->dev, "Data associated to device is missing\n");
+ return -EINVAL;
+ }
+
+ dev_data = (const struct stm32_dfsdm_dev_data *)of_id->data;
+
+ iio = devm_iio_device_alloc(dev, sizeof(*adc));
+ if (IS_ERR(iio)) {
+ dev_err(dev, "%s: Failed to allocate IIO\n", __func__);
+ return PTR_ERR(iio);
+ }
+
+ adc = iio_priv(iio);
+ if (IS_ERR(adc)) {
+ dev_err(dev, "%s: Failed to allocate ADC\n", __func__);
+ return PTR_ERR(adc);
+ }
+ adc->dfsdm = dev_get_drvdata(dev->parent);
+
+ iio->dev.parent = dev;
+ iio->dev.of_node = np;
+ iio->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+
+ platform_set_drvdata(pdev, adc);
+
+ ret = of_property_read_u32(dev->of_node, "reg", &adc->fl_id);
+ if (ret != 0) {
+ dev_err(dev, "Missing reg property\n");
+ return -EINVAL;
+ }
+
+ name = devm_kzalloc(dev, sizeof("dfsdm-adc0"), GFP_KERNEL);
+ if (!name)
+ return -ENOMEM;
+ iio->info = &stm32_dfsdm_info_adc;
+ snprintf(name, sizeof("dfsdm-adc0"), "dfsdm-adc%d", adc->fl_id);
+ iio->name = name;
+
+ /*
+ * In a first step IRQs generated for channels are not treated.
+ * So IRQ associated to filter instance 0 is dedicated to the Filter 0.
+ */
+ irq = platform_get_irq(pdev, 0);
+ ret = devm_request_irq(dev, irq, stm32_dfsdm_irq,
+ 0, pdev->name, adc);
+ if (ret < 0) {
+ dev_err(dev, "Failed to request IRQ\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(dev->of_node, "st,filter-order", &val);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set filter order\n");
+ return ret;
+ }
+
+ adc->dfsdm->fl_list[adc->fl_id].ford = val;
+
+ ret = of_property_read_u32(dev->of_node, "st,filter0-sync", &val);
+ if (!ret)
+ adc->dfsdm->fl_list[adc->fl_id].sync_mode = val;
+
+ adc->dev_data = dev_data;
+ ret = dev_data->init(iio);
+ if (ret < 0)
+ return ret;
+
+ return iio_device_register(iio);
+}
+
+static int stm32_dfsdm_adc_remove(struct platform_device *pdev)
+{
+ struct stm32_dfsdm_adc *adc = platform_get_drvdata(pdev);
+ struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+
+ iio_device_unregister(indio_dev);
+
+ return 0;
+}
+
+static struct platform_driver stm32_dfsdm_adc_driver = {
+ .driver = {
+ .name = "stm32-dfsdm-adc",
+ .of_match_table = stm32_dfsdm_adc_match,
+ },
+ .probe = stm32_dfsdm_adc_probe,
+ .remove = stm32_dfsdm_adc_remove,
+};
+module_platform_driver(stm32_dfsdm_adc_driver);
+
+MODULE_DESCRIPTION("STM32 sigma delta ADC");
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
+MODULE_LICENSE("GPL v2");
--
2.7.4
^ permalink raw reply related
* [PATCH v7 08/13] IIO: ADC: add stm32 DFSDM core support
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Add driver for stm32 DFSDM pheripheral. Its converts a sigma delta
stream in n bit samples through a low pass filter and an integrator.
stm32-dfsdm-core driver is the core part supporting the filter
instances dedicated to sigma-delta ADC or audio PDM microphone purpose.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
---
V6 to V7 updates:
- SPDX-Licensing.
- Fix return value when optional property "spi-max-frequency" not defined.
- Use devm_regmap_init_mmio_clk instead of devm_regmap_init_mmio.
drivers/iio/adc/Kconfig | 12 ++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/stm32-dfsdm-core.c | 309 ++++++++++++++++++++++++++++++++++++
drivers/iio/adc/stm32-dfsdm.h | 310 +++++++++++++++++++++++++++++++++++++
4 files changed, 632 insertions(+)
create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c
create mode 100644 drivers/iio/adc/stm32-dfsdm.h
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index c5db62f..b729ae0 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -665,6 +665,18 @@ config STM32_ADC
This driver can also be built as a module. If so, the module
will be called stm32-adc.
+config STM32_DFSDM_CORE
+ tristate "STMicroelectronics STM32 DFSDM core"
+ depends on (ARCH_STM32 && OF) || COMPILE_TEST
+ select REGMAP
+ select REGMAP_MMIO
+ help
+ Select this option to enable the driver for STMicroelectronics
+ STM32 digital filter for sigma delta converter.
+
+ This driver can also be built as a module. If so, the module
+ will be called stm32-dfsdm-core.
+
config STX104
tristate "Apex Embedded Systems STX104 driver"
depends on PC104 && X86 && ISA_BUS_API
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index d800325..b52d0a0 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_STX104) += stx104.o
obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
obj-$(CONFIG_STM32_ADC) += stm32-adc.o
+obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o
obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o
diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c
new file mode 100644
index 0000000..7242741
--- /dev/null
+++ b/drivers/iio/adc/stm32-dfsdm-core.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file is part the core part STM32 DFSDM driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Arnaud Pouliquen <arnaud.pouliquen@st.com> for STMicroelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "stm32-dfsdm.h"
+
+struct stm32_dfsdm_dev_data {
+ unsigned int num_filters;
+ unsigned int num_channels;
+ const struct regmap_config *regmap_cfg;
+};
+
+#define STM32H7_DFSDM_NUM_FILTERS 4
+#define STM32H7_DFSDM_NUM_CHANNELS 8
+
+static bool stm32_dfsdm_volatile_reg(struct device *dev, unsigned int reg)
+{
+ if (reg < DFSDM_FILTER_BASE_ADR)
+ return false;
+
+ /*
+ * Mask is done on register to avoid to list registers of all
+ * filter instances.
+ */
+ switch (reg & DFSDM_FILTER_REG_MASK) {
+ case DFSDM_CR1(0) & DFSDM_FILTER_REG_MASK:
+ case DFSDM_ISR(0) & DFSDM_FILTER_REG_MASK:
+ case DFSDM_JDATAR(0) & DFSDM_FILTER_REG_MASK:
+ case DFSDM_RDATAR(0) & DFSDM_FILTER_REG_MASK:
+ return true;
+ }
+
+ return false;
+}
+
+static const struct regmap_config stm32h7_dfsdm_regmap_cfg = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = sizeof(u32),
+ .max_register = 0x2B8,
+ .volatile_reg = stm32_dfsdm_volatile_reg,
+ .fast_io = true,
+};
+
+static const struct stm32_dfsdm_dev_data stm32h7_dfsdm_data = {
+ .num_filters = STM32H7_DFSDM_NUM_FILTERS,
+ .num_channels = STM32H7_DFSDM_NUM_CHANNELS,
+ .regmap_cfg = &stm32h7_dfsdm_regmap_cfg,
+};
+
+struct dfsdm_priv {
+ struct platform_device *pdev; /* platform device */
+
+ struct stm32_dfsdm dfsdm; /* common data exported for all instances */
+
+ unsigned int spi_clk_out_div; /* SPI clkout divider value */
+ atomic_t n_active_ch; /* number of current active channels */
+
+ struct clk *clk; /* DFSDM clock */
+ struct clk *aclk; /* audio clock */
+};
+
+/**
+ * stm32_dfsdm_start_dfsdm - start global dfsdm interface.
+ *
+ * Enable interface if n_active_ch is not null.
+ * @dfsdm: Handle used to retrieve dfsdm context.
+ */
+int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm)
+{
+ struct dfsdm_priv *priv = container_of(dfsdm, struct dfsdm_priv, dfsdm);
+ struct device *dev = &priv->pdev->dev;
+ unsigned int clk_div = priv->spi_clk_out_div;
+ int ret;
+
+ if (atomic_inc_return(&priv->n_active_ch) == 1) {
+ ret = clk_prepare_enable(priv->clk);
+ if (ret < 0) {
+ dev_err(dev, "Failed to start clock\n");
+ goto error_ret;
+ }
+ if (priv->aclk) {
+ ret = clk_prepare_enable(priv->aclk);
+ if (ret < 0) {
+ dev_err(dev, "Failed to start audio clock\n");
+ goto disable_clk;
+ }
+ }
+
+ /* Output the SPI CLKOUT (if clk_div == 0 clock if OFF) */
+ ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+ DFSDM_CHCFGR1_CKOUTDIV_MASK,
+ DFSDM_CHCFGR1_CKOUTDIV(clk_div));
+ if (ret < 0)
+ goto disable_aclk;
+
+ /* Global enable of DFSDM interface */
+ ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+ DFSDM_CHCFGR1_DFSDMEN_MASK,
+ DFSDM_CHCFGR1_DFSDMEN(1));
+ if (ret < 0)
+ goto disable_aclk;
+ }
+
+ dev_dbg(dev, "%s: n_active_ch %d\n", __func__,
+ atomic_read(&priv->n_active_ch));
+
+ return 0;
+
+disable_aclk:
+ clk_disable_unprepare(priv->aclk);
+disable_clk:
+ clk_disable_unprepare(priv->clk);
+
+error_ret:
+ atomic_dec(&priv->n_active_ch);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_start_dfsdm);
+
+/**
+ * stm32_dfsdm_stop_dfsdm - stop global DFSDM interface.
+ *
+ * Disable interface if n_active_ch is null
+ * @dfsdm: Handle used to retrieve dfsdm context.
+ */
+int stm32_dfsdm_stop_dfsdm(struct stm32_dfsdm *dfsdm)
+{
+ struct dfsdm_priv *priv = container_of(dfsdm, struct dfsdm_priv, dfsdm);
+ int ret;
+
+ if (atomic_dec_and_test(&priv->n_active_ch)) {
+ /* Global disable of DFSDM interface */
+ ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+ DFSDM_CHCFGR1_DFSDMEN_MASK,
+ DFSDM_CHCFGR1_DFSDMEN(0));
+ if (ret < 0)
+ return ret;
+
+ /* Stop SPI CLKOUT */
+ ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+ DFSDM_CHCFGR1_CKOUTDIV_MASK,
+ DFSDM_CHCFGR1_CKOUTDIV(0));
+ if (ret < 0)
+ return ret;
+
+ clk_disable_unprepare(priv->clk);
+ if (priv->aclk)
+ clk_disable_unprepare(priv->aclk);
+ }
+ dev_dbg(&priv->pdev->dev, "%s: n_active_ch %d\n", __func__,
+ atomic_read(&priv->n_active_ch));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(stm32_dfsdm_stop_dfsdm);
+
+static int stm32_dfsdm_parse_of(struct platform_device *pdev,
+ struct dfsdm_priv *priv)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct resource *res;
+ unsigned long clk_freq;
+ unsigned int spi_freq, rem;
+ int ret;
+
+ if (!node)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get memory resource\n");
+ return -ENODEV;
+ }
+ priv->dfsdm.phys_base = res->start;
+ priv->dfsdm.base = devm_ioremap_resource(&pdev->dev, res);
+
+ /*
+ * "dfsdm" clock is mandatory for DFSDM peripheral clocking.
+ * "dfsdm" or "audio" clocks can be used as source clock for
+ * the SPI clock out signal and internal processing, depending
+ * on use case.
+ */
+ priv->clk = devm_clk_get(&pdev->dev, "dfsdm");
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "No stm32_dfsdm_clk clock found\n");
+ return -EINVAL;
+ }
+
+ priv->aclk = devm_clk_get(&pdev->dev, "audio");
+ if (IS_ERR(priv->aclk))
+ priv->aclk = NULL;
+
+ if (priv->aclk)
+ clk_freq = clk_get_rate(priv->aclk);
+ else
+ clk_freq = clk_get_rate(priv->clk);
+
+ /* SPI clock out frequency */
+ ret = of_property_read_u32(pdev->dev.of_node, "spi-max-frequency",
+ &spi_freq);
+ if (ret < 0) {
+ /* No SPI master mode */
+ return 0;
+ }
+
+ priv->spi_clk_out_div = div_u64_rem(clk_freq, spi_freq, &rem) - 1;
+ priv->dfsdm.spi_master_freq = spi_freq;
+
+ if (rem) {
+ dev_warn(&pdev->dev, "SPI clock not accurate\n");
+ dev_warn(&pdev->dev, "%ld = %d * %d + %d\n",
+ clk_freq, spi_freq, priv->spi_clk_out_div + 1, rem);
+ }
+
+ return 0;
+};
+
+static const struct of_device_id stm32_dfsdm_of_match[] = {
+ {
+ .compatible = "st,stm32h7-dfsdm",
+ .data = &stm32h7_dfsdm_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, stm32_dfsdm_of_match);
+
+static int stm32_dfsdm_probe(struct platform_device *pdev)
+{
+ struct dfsdm_priv *priv;
+ struct device_node *pnode = pdev->dev.of_node;
+ const struct of_device_id *of_id;
+ const struct stm32_dfsdm_dev_data *dev_data;
+ struct stm32_dfsdm *dfsdm;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->pdev = pdev;
+
+ of_id = of_match_node(stm32_dfsdm_of_match, pnode);
+ if (!of_id->data) {
+ dev_err(&pdev->dev, "Data associated to device is missing\n");
+ return -EINVAL;
+ }
+
+ dev_data = (const struct stm32_dfsdm_dev_data *)of_id->data;
+ dfsdm = &priv->dfsdm;
+ dfsdm->fl_list = devm_kcalloc(&pdev->dev, dev_data->num_filters,
+ sizeof(*dfsdm->fl_list), GFP_KERNEL);
+ if (!dfsdm->fl_list)
+ return -ENOMEM;
+
+ dfsdm->num_fls = dev_data->num_filters;
+ dfsdm->ch_list = devm_kcalloc(&pdev->dev, dev_data->num_channels,
+ sizeof(*dfsdm->ch_list),
+ GFP_KERNEL);
+ if (!dfsdm->ch_list)
+ return -ENOMEM;
+ dfsdm->num_chs = dev_data->num_channels;
+
+ ret = stm32_dfsdm_parse_of(pdev, priv);
+ if (ret < 0)
+ return ret;
+
+ dfsdm->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dfsdm",
+ dfsdm->base,
+ &stm32h7_dfsdm_regmap_cfg);
+ if (IS_ERR(dfsdm->regmap)) {
+ ret = PTR_ERR(dfsdm->regmap);
+ dev_err(&pdev->dev, "%s: Failed to allocate regmap: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, dfsdm);
+
+ return devm_of_platform_populate(&pdev->dev);
+}
+
+static struct platform_driver stm32_dfsdm_driver = {
+ .probe = stm32_dfsdm_probe,
+ .driver = {
+ .name = "stm32-dfsdm",
+ .of_match_table = stm32_dfsdm_of_match,
+ },
+};
+
+module_platform_driver(stm32_dfsdm_driver);
+
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 dfsdm driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/stm32-dfsdm.h b/drivers/iio/adc/stm32-dfsdm.h
new file mode 100644
index 0000000..8708394
--- /dev/null
+++ b/drivers/iio/adc/stm32-dfsdm.h
@@ -0,0 +1,310 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file is part of STM32 DFSDM driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Arnaud Pouliquen <arnaud.pouliquen@st.com>.
+ */
+
+#ifndef MDF_STM32_DFSDM__H
+#define MDF_STM32_DFSDM__H
+
+#include <linux/bitfield.h>
+
+/*
+ * STM32 DFSDM - global register map
+ * ________________________________________________________
+ * | Offset | Registers block |
+ * --------------------------------------------------------
+ * | 0x000 | CHANNEL 0 + COMMON CHANNEL FIELDS |
+ * --------------------------------------------------------
+ * | 0x020 | CHANNEL 1 |
+ * --------------------------------------------------------
+ * | ... | ..... |
+ * --------------------------------------------------------
+ * | 0x0E0 | CHANNEL 7 |
+ * --------------------------------------------------------
+ * | 0x100 | FILTER 0 + COMMON FILTER FIELDs |
+ * --------------------------------------------------------
+ * | 0x200 | FILTER 1 |
+ * --------------------------------------------------------
+ * | 0x300 | FILTER 2 |
+ * --------------------------------------------------------
+ * | 0x400 | FILTER 3 |
+ * --------------------------------------------------------
+ */
+
+/*
+ * Channels register definitions
+ */
+#define DFSDM_CHCFGR1(y) ((y) * 0x20 + 0x00)
+#define DFSDM_CHCFGR2(y) ((y) * 0x20 + 0x04)
+#define DFSDM_AWSCDR(y) ((y) * 0x20 + 0x08)
+#define DFSDM_CHWDATR(y) ((y) * 0x20 + 0x0C)
+#define DFSDM_CHDATINR(y) ((y) * 0x20 + 0x10)
+
+/* CHCFGR1: Channel configuration register 1 */
+#define DFSDM_CHCFGR1_SITP_MASK GENMASK(1, 0)
+#define DFSDM_CHCFGR1_SITP(v) FIELD_PREP(DFSDM_CHCFGR1_SITP_MASK, v)
+#define DFSDM_CHCFGR1_SPICKSEL_MASK GENMASK(3, 2)
+#define DFSDM_CHCFGR1_SPICKSEL(v) FIELD_PREP(DFSDM_CHCFGR1_SPICKSEL_MASK, v)
+#define DFSDM_CHCFGR1_SCDEN_MASK BIT(5)
+#define DFSDM_CHCFGR1_SCDEN(v) FIELD_PREP(DFSDM_CHCFGR1_SCDEN_MASK, v)
+#define DFSDM_CHCFGR1_CKABEN_MASK BIT(6)
+#define DFSDM_CHCFGR1_CKABEN(v) FIELD_PREP(DFSDM_CHCFGR1_CKABEN_MASK, v)
+#define DFSDM_CHCFGR1_CHEN_MASK BIT(7)
+#define DFSDM_CHCFGR1_CHEN(v) FIELD_PREP(DFSDM_CHCFGR1_CHEN_MASK, v)
+#define DFSDM_CHCFGR1_CHINSEL_MASK BIT(8)
+#define DFSDM_CHCFGR1_CHINSEL(v) FIELD_PREP(DFSDM_CHCFGR1_CHINSEL_MASK, v)
+#define DFSDM_CHCFGR1_DATMPX_MASK GENMASK(13, 12)
+#define DFSDM_CHCFGR1_DATMPX(v) FIELD_PREP(DFSDM_CHCFGR1_DATMPX_MASK, v)
+#define DFSDM_CHCFGR1_DATPACK_MASK GENMASK(15, 14)
+#define DFSDM_CHCFGR1_DATPACK(v) FIELD_PREP(DFSDM_CHCFGR1_DATPACK_MASK, v)
+#define DFSDM_CHCFGR1_CKOUTDIV_MASK GENMASK(23, 16)
+#define DFSDM_CHCFGR1_CKOUTDIV(v) FIELD_PREP(DFSDM_CHCFGR1_CKOUTDIV_MASK, v)
+#define DFSDM_CHCFGR1_CKOUTSRC_MASK BIT(30)
+#define DFSDM_CHCFGR1_CKOUTSRC(v) FIELD_PREP(DFSDM_CHCFGR1_CKOUTSRC_MASK, v)
+#define DFSDM_CHCFGR1_DFSDMEN_MASK BIT(31)
+#define DFSDM_CHCFGR1_DFSDMEN(v) FIELD_PREP(DFSDM_CHCFGR1_DFSDMEN_MASK, v)
+
+/* CHCFGR2: Channel configuration register 2 */
+#define DFSDM_CHCFGR2_DTRBS_MASK GENMASK(7, 3)
+#define DFSDM_CHCFGR2_DTRBS(v) FIELD_PREP(DFSDM_CHCFGR2_DTRBS_MASK, v)
+#define DFSDM_CHCFGR2_OFFSET_MASK GENMASK(31, 8)
+#define DFSDM_CHCFGR2_OFFSET(v) FIELD_PREP(DFSDM_CHCFGR2_OFFSET_MASK, v)
+
+/* AWSCDR: Channel analog watchdog and short circuit detector */
+#define DFSDM_AWSCDR_SCDT_MASK GENMASK(7, 0)
+#define DFSDM_AWSCDR_SCDT(v) FIELD_PREP(DFSDM_AWSCDR_SCDT_MASK, v)
+#define DFSDM_AWSCDR_BKSCD_MASK GENMASK(15, 12)
+#define DFSDM_AWSCDR_BKSCD(v) FIELD_PREP(DFSDM_AWSCDR_BKSCD_MASK, v)
+#define DFSDM_AWSCDR_AWFOSR_MASK GENMASK(20, 16)
+#define DFSDM_AWSCDR_AWFOSR(v) FIELD_PREP(DFSDM_AWSCDR_AWFOSR_MASK, v)
+#define DFSDM_AWSCDR_AWFORD_MASK GENMASK(23, 22)
+#define DFSDM_AWSCDR_AWFORD(v) FIELD_PREP(DFSDM_AWSCDR_AWFORD_MASK, v)
+
+/*
+ * Filters register definitions
+ */
+#define DFSDM_FILTER_BASE_ADR 0x100
+#define DFSDM_FILTER_REG_MASK 0x7F
+#define DFSDM_FILTER_X_BASE_ADR(x) ((x) * 0x80 + DFSDM_FILTER_BASE_ADR)
+
+#define DFSDM_CR1(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x00)
+#define DFSDM_CR2(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x04)
+#define DFSDM_ISR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x08)
+#define DFSDM_ICR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x0C)
+#define DFSDM_JCHGR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x10)
+#define DFSDM_FCR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x14)
+#define DFSDM_JDATAR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x18)
+#define DFSDM_RDATAR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x1C)
+#define DFSDM_AWHTR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x20)
+#define DFSDM_AWLTR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x24)
+#define DFSDM_AWSR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x28)
+#define DFSDM_AWCFR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x2C)
+#define DFSDM_EXMAX(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x30)
+#define DFSDM_EXMIN(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x34)
+#define DFSDM_CNVTIMR(x) (DFSDM_FILTER_X_BASE_ADR(x) + 0x38)
+
+/* CR1 Control register 1 */
+#define DFSDM_CR1_DFEN_MASK BIT(0)
+#define DFSDM_CR1_DFEN(v) FIELD_PREP(DFSDM_CR1_DFEN_MASK, v)
+#define DFSDM_CR1_JSWSTART_MASK BIT(1)
+#define DFSDM_CR1_JSWSTART(v) FIELD_PREP(DFSDM_CR1_JSWSTART_MASK, v)
+#define DFSDM_CR1_JSYNC_MASK BIT(3)
+#define DFSDM_CR1_JSYNC(v) FIELD_PREP(DFSDM_CR1_JSYNC_MASK, v)
+#define DFSDM_CR1_JSCAN_MASK BIT(4)
+#define DFSDM_CR1_JSCAN(v) FIELD_PREP(DFSDM_CR1_JSCAN_MASK, v)
+#define DFSDM_CR1_JDMAEN_MASK BIT(5)
+#define DFSDM_CR1_JDMAEN(v) FIELD_PREP(DFSDM_CR1_JDMAEN_MASK, v)
+#define DFSDM_CR1_JEXTSEL_MASK GENMASK(12, 8)
+#define DFSDM_CR1_JEXTSEL(v) FIELD_PREP(DFSDM_CR1_JEXTSEL_MASK, v)
+#define DFSDM_CR1_JEXTEN_MASK GENMASK(14, 13)
+#define DFSDM_CR1_JEXTEN(v) FIELD_PREP(DFSDM_CR1_JEXTEN_MASK, v)
+#define DFSDM_CR1_RSWSTART_MASK BIT(17)
+#define DFSDM_CR1_RSWSTART(v) FIELD_PREP(DFSDM_CR1_RSWSTART_MASK, v)
+#define DFSDM_CR1_RCONT_MASK BIT(18)
+#define DFSDM_CR1_RCONT(v) FIELD_PREP(DFSDM_CR1_RCONT_MASK, v)
+#define DFSDM_CR1_RSYNC_MASK BIT(19)
+#define DFSDM_CR1_RSYNC(v) FIELD_PREP(DFSDM_CR1_RSYNC_MASK, v)
+#define DFSDM_CR1_RDMAEN_MASK BIT(21)
+#define DFSDM_CR1_RDMAEN(v) FIELD_PREP(DFSDM_CR1_RDMAEN_MASK, v)
+#define DFSDM_CR1_RCH_MASK GENMASK(26, 24)
+#define DFSDM_CR1_RCH(v) FIELD_PREP(DFSDM_CR1_RCH_MASK, v)
+#define DFSDM_CR1_FAST_MASK BIT(29)
+#define DFSDM_CR1_FAST(v) FIELD_PREP(DFSDM_CR1_FAST_MASK, v)
+#define DFSDM_CR1_AWFSEL_MASK BIT(30)
+#define DFSDM_CR1_AWFSEL(v) FIELD_PREP(DFSDM_CR1_AWFSEL_MASK, v)
+
+/* CR2: Control register 2 */
+#define DFSDM_CR2_IE_MASK GENMASK(6, 0)
+#define DFSDM_CR2_IE(v) FIELD_PREP(DFSDM_CR2_IE_MASK, v)
+#define DFSDM_CR2_JEOCIE_MASK BIT(0)
+#define DFSDM_CR2_JEOCIE(v) FIELD_PREP(DFSDM_CR2_JEOCIE_MASK, v)
+#define DFSDM_CR2_REOCIE_MASK BIT(1)
+#define DFSDM_CR2_REOCIE(v) FIELD_PREP(DFSDM_CR2_REOCIE_MASK, v)
+#define DFSDM_CR2_JOVRIE_MASK BIT(2)
+#define DFSDM_CR2_JOVRIE(v) FIELD_PREP(DFSDM_CR2_JOVRIE_MASK, v)
+#define DFSDM_CR2_ROVRIE_MASK BIT(3)
+#define DFSDM_CR2_ROVRIE(v) FIELD_PREP(DFSDM_CR2_ROVRIE_MASK, v)
+#define DFSDM_CR2_AWDIE_MASK BIT(4)
+#define DFSDM_CR2_AWDIE(v) FIELD_PREP(DFSDM_CR2_AWDIE_MASK, v)
+#define DFSDM_CR2_SCDIE_MASK BIT(5)
+#define DFSDM_CR2_SCDIE(v) FIELD_PREP(DFSDM_CR2_SCDIE_MASK, v)
+#define DFSDM_CR2_CKABIE_MASK BIT(6)
+#define DFSDM_CR2_CKABIE(v) FIELD_PREP(DFSDM_CR2_CKABIE_MASK, v)
+#define DFSDM_CR2_EXCH_MASK GENMASK(15, 8)
+#define DFSDM_CR2_EXCH(v) FIELD_PREP(DFSDM_CR2_EXCH_MASK, v)
+#define DFSDM_CR2_AWDCH_MASK GENMASK(23, 16)
+#define DFSDM_CR2_AWDCH(v) FIELD_PREP(DFSDM_CR2_AWDCH_MASK, v)
+
+/* ISR: Interrupt status register */
+#define DFSDM_ISR_JEOCF_MASK BIT(0)
+#define DFSDM_ISR_JEOCF(v) FIELD_PREP(DFSDM_ISR_JEOCF_MASK, v)
+#define DFSDM_ISR_REOCF_MASK BIT(1)
+#define DFSDM_ISR_REOCF(v) FIELD_PREP(DFSDM_ISR_REOCF_MASK, v)
+#define DFSDM_ISR_JOVRF_MASK BIT(2)
+#define DFSDM_ISR_JOVRF(v) FIELD_PREP(DFSDM_ISR_JOVRF_MASK, v)
+#define DFSDM_ISR_ROVRF_MASK BIT(3)
+#define DFSDM_ISR_ROVRF(v) FIELD_PREP(DFSDM_ISR_ROVRF_MASK, v)
+#define DFSDM_ISR_AWDF_MASK BIT(4)
+#define DFSDM_ISR_AWDF(v) FIELD_PREP(DFSDM_ISR_AWDF_MASK, v)
+#define DFSDM_ISR_JCIP_MASK BIT(13)
+#define DFSDM_ISR_JCIP(v) FIELD_PREP(DFSDM_ISR_JCIP_MASK, v)
+#define DFSDM_ISR_RCIP_MASK BIT(14)
+#define DFSDM_ISR_RCIP(v) FIELD_PREP(DFSDM_ISR_RCIP, v)
+#define DFSDM_ISR_CKABF_MASK GENMASK(23, 16)
+#define DFSDM_ISR_CKABF(v) FIELD_PREP(DFSDM_ISR_CKABF_MASK, v)
+#define DFSDM_ISR_SCDF_MASK GENMASK(31, 24)
+#define DFSDM_ISR_SCDF(v) FIELD_PREP(DFSDM_ISR_SCDF_MASK, v)
+
+/* ICR: Interrupt flag clear register */
+#define DFSDM_ICR_CLRJOVRF_MASK BIT(2)
+#define DFSDM_ICR_CLRJOVRF(v) FIELD_PREP(DFSDM_ICR_CLRJOVRF_MASK, v)
+#define DFSDM_ICR_CLRROVRF_MASK BIT(3)
+#define DFSDM_ICR_CLRROVRF(v) FIELD_PREP(DFSDM_ICR_CLRROVRF_MASK, v)
+#define DFSDM_ICR_CLRCKABF_MASK GENMASK(23, 16)
+#define DFSDM_ICR_CLRCKABF(v) FIELD_PREP(DFSDM_ICR_CLRCKABF_MASK, v)
+#define DFSDM_ICR_CLRCKABF_CH_MASK(y) BIT(16 + (y))
+#define DFSDM_ICR_CLRCKABF_CH(v, y) \
+ (((v) << (16 + (y))) & DFSDM_ICR_CLRCKABF_CH_MASK(y))
+#define DFSDM_ICR_CLRSCDF_MASK GENMASK(31, 24)
+#define DFSDM_ICR_CLRSCDF(v) FIELD_PREP(DFSDM_ICR_CLRSCDF_MASK, v)
+#define DFSDM_ICR_CLRSCDF_CH_MASK(y) BIT(24 + (y))
+#define DFSDM_ICR_CLRSCDF_CH(v, y) \
+ (((v) << (24 + (y))) & DFSDM_ICR_CLRSCDF_MASK(y))
+
+/* FCR: Filter control register */
+#define DFSDM_FCR_IOSR_MASK GENMASK(7, 0)
+#define DFSDM_FCR_IOSR(v) FIELD_PREP(DFSDM_FCR_IOSR_MASK, v)
+#define DFSDM_FCR_FOSR_MASK GENMASK(25, 16)
+#define DFSDM_FCR_FOSR(v) FIELD_PREP(DFSDM_FCR_FOSR_MASK, v)
+#define DFSDM_FCR_FORD_MASK GENMASK(31, 29)
+#define DFSDM_FCR_FORD(v) FIELD_PREP(DFSDM_FCR_FORD_MASK, v)
+
+/* RDATAR: Filter data register for regular channel */
+#define DFSDM_DATAR_CH_MASK GENMASK(2, 0)
+#define DFSDM_DATAR_DATA_OFFSET 8
+#define DFSDM_DATAR_DATA_MASK GENMASK(31, DFSDM_DATAR_DATA_OFFSET)
+
+/* AWLTR: Filter analog watchdog low threshold register */
+#define DFSDM_AWLTR_BKAWL_MASK GENMASK(3, 0)
+#define DFSDM_AWLTR_BKAWL(v) FIELD_PREP(DFSDM_AWLTR_BKAWL_MASK, v)
+#define DFSDM_AWLTR_AWLT_MASK GENMASK(31, 8)
+#define DFSDM_AWLTR_AWLT(v) FIELD_PREP(DFSDM_AWLTR_AWLT_MASK, v)
+
+/* AWHTR: Filter analog watchdog low threshold register */
+#define DFSDM_AWHTR_BKAWH_MASK GENMASK(3, 0)
+#define DFSDM_AWHTR_BKAWH(v) FIELD_PREP(DFSDM_AWHTR_BKAWH_MASK, v)
+#define DFSDM_AWHTR_AWHT_MASK GENMASK(31, 8)
+#define DFSDM_AWHTR_AWHT(v) FIELD_PREP(DFSDM_AWHTR_AWHT_MASK, v)
+
+/* AWSR: Filter watchdog status register */
+#define DFSDM_AWSR_AWLTF_MASK GENMASK(7, 0)
+#define DFSDM_AWSR_AWLTF(v) FIELD_PREP(DFSDM_AWSR_AWLTF_MASK, v)
+#define DFSDM_AWSR_AWHTF_MASK GENMASK(15, 8)
+#define DFSDM_AWSR_AWHTF(v) FIELD_PREP(DFSDM_AWSR_AWHTF_MASK, v)
+
+/* AWCFR: Filter watchdog status register */
+#define DFSDM_AWCFR_AWLTF_MASK GENMASK(7, 0)
+#define DFSDM_AWCFR_AWLTF(v) FIELD_PREP(DFSDM_AWCFR_AWLTF_MASK, v)
+#define DFSDM_AWCFR_AWHTF_MASK GENMASK(15, 8)
+#define DFSDM_AWCFR_AWHTF(v) FIELD_PREP(DFSDM_AWCFR_AWHTF_MASK, v)
+
+/* DFSDM filter order */
+enum stm32_dfsdm_sinc_order {
+ DFSDM_FASTSINC_ORDER, /* FastSinc filter type */
+ DFSDM_SINC1_ORDER, /* Sinc 1 filter type */
+ DFSDM_SINC2_ORDER, /* Sinc 2 filter type */
+ DFSDM_SINC3_ORDER, /* Sinc 3 filter type */
+ DFSDM_SINC4_ORDER, /* Sinc 4 filter type (N.A. for watchdog) */
+ DFSDM_SINC5_ORDER, /* Sinc 5 filter type (N.A. for watchdog) */
+ DFSDM_NB_SINC_ORDER,
+};
+
+/**
+ * struct stm32_dfsdm_filter - structure relative to stm32 FDSDM filter
+ * @iosr: integrator oversampling
+ * @fosr: filter oversampling
+ * @ford: filter order
+ * @res: output sample resolution
+ * @sync_mode: filter synchronized with filter 0
+ * @fast: filter fast mode
+ */
+struct stm32_dfsdm_filter {
+ unsigned int iosr;
+ unsigned int fosr;
+ enum stm32_dfsdm_sinc_order ford;
+ u64 res;
+ unsigned int sync_mode;
+ unsigned int fast;
+};
+
+/**
+ * struct stm32_dfsdm_channel - structure relative to stm32 FDSDM channel
+ * @id: id of the channel
+ * @type: interface type linked to stm32_dfsdm_chan_type
+ * @src: interface type linked to stm32_dfsdm_chan_src
+ * @alt_si: alternative serial input interface
+ */
+struct stm32_dfsdm_channel {
+ unsigned int id;
+ unsigned int type;
+ unsigned int src;
+ unsigned int alt_si;
+};
+
+/**
+ * struct stm32_dfsdm - stm32 FDSDM driver common data (for all instances)
+ * @base: control registers base cpu addr
+ * @phys_base: DFSDM IP register physical address
+ * @regmap: regmap for register read/write
+ * @fl_list: filter resources list
+ * @num_fls: number of filter resources available
+ * @ch_list: channel resources list
+ * @num_chs: number of channel resources available
+ * @spi_master_freq: SPI clock out frequency
+ */
+struct stm32_dfsdm {
+ void __iomem *base;
+ phys_addr_t phys_base;
+ struct regmap *regmap;
+ struct stm32_dfsdm_filter *fl_list;
+ unsigned int num_fls;
+ struct stm32_dfsdm_channel *ch_list;
+ unsigned int num_chs;
+ unsigned int spi_master_freq;
+};
+
+/* DFSDM channel serial spi clock source */
+enum stm32_dfsdm_spi_clk_src {
+ DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL,
+ DFSDM_CHANNEL_SPI_CLOCK_INTERNAL,
+ DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING,
+ DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING
+};
+
+int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm);
+int stm32_dfsdm_stop_dfsdm(struct stm32_dfsdm *dfsdm);
+
+#endif
--
2.7.4
^ permalink raw reply related
* [PATCH v7 07/13] IIO: add DT bindings for stm32 DFSDM filter
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Add bindings that describes STM32 Digital Filter for Sigma Delta
Modulators. DFSDM allows to connect sigma delta
modulators.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
V6 to V7 update:
- Add missing #interrupt-cells in example.
.../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 128 +++++++++++++++++++++
1 file changed, 128 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
new file mode 100644
index 0000000..911492da
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
@@ -0,0 +1,128 @@
+STMicroelectronics STM32 DFSDM ADC device driver
+
+
+STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
+interface external sigma delta modulators to STM32 micro controllers.
+It is mainly targeted for:
+- Sigma delta modulators (motor control, metering...)
+- PDM microphones (audio digital microphone)
+
+It features up to 8 serial digital interfaces (SPI or Manchester) and
+up to 4 filters on stm32h7.
+
+Each child node match with a filter instance.
+
+Contents of a STM32 DFSDM root node:
+------------------------------------
+Required properties:
+- compatible: Should be "st,stm32h7-dfsdm".
+- reg: Offset and length of the DFSDM block register set.
+- clocks: IP and serial interfaces clocking. Should be set according
+ to rcc clock ID and "clock-names".
+- clock-names: Input clock name "dfsdm" must be defined,
+ "audio" is optional. If defined CLKOUT is based on the audio
+ clock, else "dfsdm" is used.
+- #interrupt-cells = <1>;
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- spi-max-frequency: Requested only for SPI master mode.
+ SPI clock OUT frequency (Hz). This clock must be set according
+ to "clock" property. Frequency must be a multiple of the rcc
+ clock frequency. If not, SPI CLKOUT frequency will not be
+ accurate.
+
+Contents of a STM32 DFSDM child nodes:
+--------------------------------------
+
+Required properties:
+- compatible: Must be:
+ "st,stm32-dfsdm-adc" for sigma delta ADCs
+ "st,stm32-dfsdm-dmic" for audio digital microphone.
+- reg: Specifies the DFSDM filter instance used.
+- interrupts: IRQ lines connected to each DFSDM filter instance.
+- st,adc-channels: List of single-ended channels muxed for this ADC.
+ valid values:
+ "st,stm32h7-dfsdm" compatibility: 0 to 7.
+- st,adc-channel-names: List of single-ended channel names.
+- st,filter-order: SinC filter order from 0 to 5.
+ 0: FastSinC
+ [1-5]: order 1 to 5.
+ For audio purpose it is recommended to use order 3 to 5.
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+
+Required properties for "st,stm32-dfsdm-adc" compatibility:
+- io-channels: From common IIO binding. Used to pipe external sigma delta
+ modulator or internal ADC output to DFSDM channel.
+ This is not required for "st,stm32-dfsdm-pdm" compatibility as
+ PDM microphone is binded in Audio DT node.
+
+Required properties for "st,stm32-dfsdm-pdm" compatibility:
+- #sound-dai-cells: Must be set to 0.
+- dma: DMA controller phandle and DMA request line associated to the
+ filter instance (specified by the field "reg")
+- dma-names: Must be "rx"
+
+Optional properties:
+- st,adc-channel-types: Single-ended channel input type.
+ - "SPI_R": SPI with data on rising edge (default)
+ - "SPI_F": SPI with data on falling edge
+ - "MANCH_R": manchester codec, rising edge = logic 0
+ - "MANCH_F": manchester codec, falling edge = logic 1
+- st,adc-channel-clk-src: Conversion clock source.
+ - "CLKIN": external SPI clock (CLKIN x)
+ - "CLKOUT": internal SPI clock (CLKOUT) (default)
+ - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
+ - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
+
+- st,adc-alt-channel: Must be defined if two sigma delta modulator are
+ connected on same SPI input.
+ If not set, channel n is connected to SPI input n.
+ If set, channel n is connected to SPI input n + 1.
+
+- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0.
+ Used for multi microphones synchronization.
+
+Example of a sigma delta adc connected on DFSDM SPI port 0
+and a pdm microphone connected on DFSDM SPI port 1:
+
+ ads1202: simple_sd_adc at 0 {
+ compatible = "ads1202";
+ #io-channel-cells = <1>;
+ };
+
+ dfsdm: dfsdm at 40017000 {
+ compatible = "st,stm32h7-dfsdm";
+ reg = <0x40017000 0x400>;
+ clocks = <&rcc DFSDM1_CK>;
+ clock-names = "dfsdm";
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dfsdm_adc0: filter at 0 {
+ compatible = "st,stm32-dfsdm-adc";
+ #io-channel-cells = <1>;
+ reg = <0>;
+ interrupts = <110>;
+ st,adc-channels = <0>;
+ st,adc-channel-names = "sd_adc0";
+ st,adc-channel-types = "SPI_F";
+ st,adc-channel-clk-src = "CLKOUT";
+ io-channels = <&ads1202 0>;
+ st,filter-order = <3>;
+ };
+ dfsdm_pdm1: filter at 1 {
+ compatible = "st,stm32-dfsdm-dmic";
+ reg = <1>;
+ interrupts = <111>;
+ dmas = <&dmamux1 102 0x400 0x00>;
+ dma-names = "rx";
+ st,adc-channels = <1>;
+ st,adc-channel-names = "dmic1";
+ st,adc-channel-types = "SPI_R";
+ st,adc-channel-clk-src = "CLKOUT";
+ st,filter-order = <5>;
+ };
+ }
--
2.7.4
^ permalink raw reply related
* [PATCH v7 06/13] IIO: ADC: add sigma delta modulator support
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Add generic driver to support sigma delta modulators.
Typically, this device is hardware connected to
an IIO device in charge of the conversion. Devices are
bonded through the hardware consumer API.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
V6 to V7 update:
- SPDX-Licensing
drivers/iio/adc/Kconfig | 12 +++++++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/sd_adc_modulator.c | 68 ++++++++++++++++++++++++++++++++++++++
3 files changed, 81 insertions(+)
create mode 100644 drivers/iio/adc/sd_adc_modulator.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 5762565..c5db62f 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -626,6 +626,18 @@ config SPEAR_ADC
To compile this driver as a module, choose M here: the
module will be called spear_adc.
+config SD_ADC_MODULATOR
+ tristate "Generic sigma delta modulator"
+ depends on OF
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Select this option to enables sigma delta modulator. This driver can
+ support generic sigma delta modulators.
+
+ This driver can also be built as a module. If so, the module
+ will be called sd_adc_modulator.
+
config STM32_ADC_CORE
tristate "STMicroelectronics STM32 adc core"
depends on ARCH_STM32 || COMPILE_TEST
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 9874e05..d800325 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -81,3 +81,4 @@ obj-$(CONFIG_VF610_ADC) += vf610_adc.o
obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
xilinx-xadc-y := xilinx-xadc-core.o xilinx-xadc-events.o
obj-$(CONFIG_XILINX_XADC) += xilinx-xadc.o
+obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o
diff --git a/drivers/iio/adc/sd_adc_modulator.c b/drivers/iio/adc/sd_adc_modulator.c
new file mode 100644
index 0000000..560d8c7
--- /dev/null
+++ b/drivers/iio/adc/sd_adc_modulator.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic sigma delta modulator driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author: Arnaud Pouliquen <arnaud.pouliquen@st.com>.
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+static const struct iio_info iio_sd_mod_iio_info;
+
+static const struct iio_chan_spec iio_sd_mod_ch = {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 1,
+ .shift = 0,
+ },
+};
+
+static int iio_sd_mod_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct iio_dev *iio;
+
+ iio = devm_iio_device_alloc(dev, 0);
+ if (!iio)
+ return -ENOMEM;
+
+ iio->dev.parent = dev;
+ iio->dev.of_node = dev->of_node;
+ iio->name = dev_name(dev);
+ iio->info = &iio_sd_mod_iio_info;
+ iio->modes = INDIO_BUFFER_HARDWARE;
+
+ iio->num_channels = 1;
+ iio->channels = &iio_sd_mod_ch;
+
+ platform_set_drvdata(pdev, iio);
+
+ return devm_iio_device_register(&pdev->dev, iio);
+}
+
+static const struct of_device_id sd_adc_of_match[] = {
+ { .compatible = "sd-modulator" },
+ { .compatible = "ads1201" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sd_adc_of_match);
+
+static struct platform_driver iio_sd_mod_adc = {
+ .driver = {
+ .name = "iio_sd_adc_mod",
+ .of_match_table = of_match_ptr(sd_adc_of_match),
+ },
+ .probe = iio_sd_mod_probe,
+};
+
+module_platform_driver(iio_sd_mod_adc);
+
+MODULE_DESCRIPTION("Basic sigma delta modulator");
+MODULE_AUTHOR("Arnaud Pouliquen <arnaud.pouliquen@st.com>");
+MODULE_LICENSE("GPL v2");
--
2.7.4
^ permalink raw reply related
* [PATCH v7 05/13] IIO: Add DT bindings for sigma delta adc modulator
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Add documentation of device tree bindings to support
sigma delta modulator in IIO framework.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
.../devicetree/bindings/iio/adc/sigma-delta-modulator.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
new file mode 100644
index 0000000..e9ebb8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
@@ -0,0 +1,13 @@
+Device-Tree bindings for sigma delta modulator
+
+Required properties:
+- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
+ as a generic SD modulator if modulator not specified in compatible list.
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+
+Example node:
+
+ ads1202: adc at 0 {
+ compatible = "sd-modulator";
+ #io-channel-cells = <1>;
+ };
--
2.7.4
^ permalink raw reply related
* [PATCH v7 04/13] IIO: inkern: API for manipulating channel attributes
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Extend the inkern API with functions for reading and writing
attribute of iio channels.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
V6 to V7 update:
- Move iio_chan_info_enum from iio.h to types.h.
drivers/iio/inkern.c | 18 +++++++++++++-----
include/linux/iio/consumer.h | 26 ++++++++++++++++++++++++++
include/linux/iio/iio.h | 28 ----------------------------
include/linux/iio/types.h | 28 ++++++++++++++++++++++++++++
4 files changed, 67 insertions(+), 33 deletions(-)
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index 069defc..f2e7824 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -664,9 +664,8 @@ int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
}
EXPORT_SYMBOL_GPL(iio_convert_raw_to_processed);
-static int iio_read_channel_attribute(struct iio_channel *chan,
- int *val, int *val2,
- enum iio_chan_info_enum attribute)
+int iio_read_channel_attribute(struct iio_channel *chan, int *val, int *val2,
+ enum iio_chan_info_enum attribute)
{
int ret;
@@ -682,6 +681,8 @@ static int iio_read_channel_attribute(struct iio_channel *chan,
return ret;
}
+EXPORT_SYMBOL_GPL(iio_read_channel_attribute);
+
int iio_read_channel_offset(struct iio_channel *chan, int *val, int *val2)
{
@@ -850,7 +851,8 @@ static int iio_channel_write(struct iio_channel *chan, int val, int val2,
chan->channel, val, val2, info);
}
-int iio_write_channel_raw(struct iio_channel *chan, int val)
+int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2,
+ enum iio_chan_info_enum attribute)
{
int ret;
@@ -860,12 +862,18 @@ int iio_write_channel_raw(struct iio_channel *chan, int val)
goto err_unlock;
}
- ret = iio_channel_write(chan, val, 0, IIO_CHAN_INFO_RAW);
+ ret = iio_channel_write(chan, val, val2, attribute);
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
}
+EXPORT_SYMBOL_GPL(iio_write_channel_attribute);
+
+int iio_write_channel_raw(struct iio_channel *chan, int val)
+{
+ return iio_write_channel_attribute(chan, val, 0, IIO_CHAN_INFO_RAW);
+}
EXPORT_SYMBOL_GPL(iio_write_channel_raw);
unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan)
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 5e347a9..2017f35 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -216,6 +216,32 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val);
int iio_read_channel_processed(struct iio_channel *chan, int *val);
/**
+ * iio_write_channel_attribute() - Write values to the device attribute.
+ * @chan: The channel being queried.
+ * @val: Value being written.
+ * @val2: Value being written.val2 use depends on attribute type.
+ * @attribute: info attribute to be read.
+ *
+ * Returns an error code or 0.
+ */
+int iio_write_channel_attribute(struct iio_channel *chan, int val,
+ int val2, enum iio_chan_info_enum attribute);
+
+/**
+ * iio_read_channel_attribute() - Read values from the device attribute.
+ * @chan: The channel being queried.
+ * @val: Value being written.
+ * @val2: Value being written.Val2 use depends on attribute type.
+ * @attribute: info attribute to be written.
+ *
+ * Returns an error code if failed. Else returns a description of what is in val
+ * and val2, such as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val
+ * + val2/1e6
+ */
+int iio_read_channel_attribute(struct iio_channel *chan, int *val,
+ int *val2, enum iio_chan_info_enum attribute);
+
+/**
* iio_write_channel_raw() - write to a given channel
* @chan: The channel being queried.
* @val: Value being written.
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index c380daa..007caf7 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -20,34 +20,6 @@
* Currently assumes nano seconds.
*/
-enum iio_chan_info_enum {
- IIO_CHAN_INFO_RAW = 0,
- IIO_CHAN_INFO_PROCESSED,
- IIO_CHAN_INFO_SCALE,
- IIO_CHAN_INFO_OFFSET,
- IIO_CHAN_INFO_CALIBSCALE,
- IIO_CHAN_INFO_CALIBBIAS,
- IIO_CHAN_INFO_PEAK,
- IIO_CHAN_INFO_PEAK_SCALE,
- IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
- IIO_CHAN_INFO_AVERAGE_RAW,
- IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
- IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY,
- IIO_CHAN_INFO_SAMP_FREQ,
- IIO_CHAN_INFO_FREQUENCY,
- IIO_CHAN_INFO_PHASE,
- IIO_CHAN_INFO_HARDWAREGAIN,
- IIO_CHAN_INFO_HYSTERESIS,
- IIO_CHAN_INFO_INT_TIME,
- IIO_CHAN_INFO_ENABLE,
- IIO_CHAN_INFO_CALIBHEIGHT,
- IIO_CHAN_INFO_CALIBWEIGHT,
- IIO_CHAN_INFO_DEBOUNCE_COUNT,
- IIO_CHAN_INFO_DEBOUNCE_TIME,
- IIO_CHAN_INFO_CALIBEMISSIVITY,
- IIO_CHAN_INFO_OVERSAMPLING_RATIO,
-};
-
enum iio_shared_by {
IIO_SEPARATE,
IIO_SHARED_BY_TYPE,
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index 2aa7b63..6eb3d683 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -34,4 +34,32 @@ enum iio_available_type {
IIO_AVAIL_RANGE,
};
+enum iio_chan_info_enum {
+ IIO_CHAN_INFO_RAW = 0,
+ IIO_CHAN_INFO_PROCESSED,
+ IIO_CHAN_INFO_SCALE,
+ IIO_CHAN_INFO_OFFSET,
+ IIO_CHAN_INFO_CALIBSCALE,
+ IIO_CHAN_INFO_CALIBBIAS,
+ IIO_CHAN_INFO_PEAK,
+ IIO_CHAN_INFO_PEAK_SCALE,
+ IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
+ IIO_CHAN_INFO_AVERAGE_RAW,
+ IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
+ IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY,
+ IIO_CHAN_INFO_SAMP_FREQ,
+ IIO_CHAN_INFO_FREQUENCY,
+ IIO_CHAN_INFO_PHASE,
+ IIO_CHAN_INFO_HARDWAREGAIN,
+ IIO_CHAN_INFO_HYSTERESIS,
+ IIO_CHAN_INFO_INT_TIME,
+ IIO_CHAN_INFO_ENABLE,
+ IIO_CHAN_INFO_CALIBHEIGHT,
+ IIO_CHAN_INFO_CALIBWEIGHT,
+ IIO_CHAN_INFO_DEBOUNCE_COUNT,
+ IIO_CHAN_INFO_DEBOUNCE_TIME,
+ IIO_CHAN_INFO_CALIBEMISSIVITY,
+ IIO_CHAN_INFO_OVERSAMPLING_RATIO,
+};
+
#endif /* _IIO_TYPES_H_ */
--
2.7.4
^ permalink raw reply related
* [PATCH v7 03/13] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
Add devm_iio_hw_consumer_alloc function that calls iio_hw_consumer_free
when the device is unbound from the bus.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/iio/buffer/industrialio-hw-consumer.c | 66 +++++++++++++++++++++++++++
include/linux/iio/hw-consumer.h | 2 +
2 files changed, 68 insertions(+)
diff --git a/drivers/iio/buffer/industrialio-hw-consumer.c b/drivers/iio/buffer/industrialio-hw-consumer.c
index 993ecdc..9516569 100644
--- a/drivers/iio/buffer/industrialio-hw-consumer.c
+++ b/drivers/iio/buffer/industrialio-hw-consumer.c
@@ -137,6 +137,72 @@ void iio_hw_consumer_free(struct iio_hw_consumer *hwc)
}
EXPORT_SYMBOL_GPL(iio_hw_consumer_free);
+static void devm_iio_hw_consumer_release(struct device *dev, void *res)
+{
+ iio_hw_consumer_free(*(struct iio_hw_consumer **)res);
+}
+
+static int devm_iio_hw_consumer_match(struct device *dev, void *res, void *data)
+{
+ struct iio_hw_consumer **r = res;
+
+ if (!r || !*r) {
+ WARN_ON(!r || !*r);
+ return 0;
+ }
+ return *r == data;
+}
+
+/**
+ * devm_iio_hw_consumer_alloc - Resource-managed iio_hw_consumer_alloc()
+ * @dev: Pointer to consumer device.
+ *
+ * Managed iio_hw_consumer_alloc. iio_hw_consumer allocated with this function
+ * is automatically freed on driver detach.
+ *
+ * If an iio_hw_consumer allocated with this function needs to be freed
+ * separately, devm_iio_hw_consumer_free() must be used.
+ *
+ * returns pointer to allocated iio_hw_consumer on success, NULL on failure.
+ */
+struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev)
+{
+ struct iio_hw_consumer **ptr, *iio_hwc;
+
+ ptr = devres_alloc(devm_iio_hw_consumer_release, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return NULL;
+
+ iio_hwc = iio_hw_consumer_alloc(dev);
+ if (IS_ERR(iio_hwc)) {
+ devres_free(ptr);
+ } else {
+ *ptr = iio_hwc;
+ devres_add(dev, ptr);
+ }
+
+ return iio_hwc;
+}
+EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_alloc);
+
+/**
+ * devm_iio_hw_consumer_free - Resource-managed iio_hw_consumer_free()
+ * @dev: Pointer to consumer device.
+ * @hwc: iio_hw_consumer to free.
+ *
+ * Free iio_hw_consumer allocated with devm_iio_hw_consumer_alloc().
+ */
+void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc)
+{
+ int rc;
+
+ rc = devres_release(dev, devm_iio_hw_consumer_release,
+ devm_iio_hw_consumer_match, hwc);
+ WARN_ON(rc);
+}
+EXPORT_SYMBOL_GPL(devm_iio_hw_consumer_free);
+
/**
* iio_hw_consumer_enable() - Enable IIO hardware consumer
* @hwc: iio_hw_consumer to enable.
diff --git a/include/linux/iio/hw-consumer.h b/include/linux/iio/hw-consumer.h
index db8c00b..44d48bb 100644
--- a/include/linux/iio/hw-consumer.h
+++ b/include/linux/iio/hw-consumer.h
@@ -13,6 +13,8 @@ struct iio_hw_consumer;
struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev);
void iio_hw_consumer_free(struct iio_hw_consumer *hwc);
+struct iio_hw_consumer *devm_iio_hw_consumer_alloc(struct device *dev);
+void devm_iio_hw_consumer_free(struct device *dev, struct iio_hw_consumer *hwc);
int iio_hw_consumer_enable(struct iio_hw_consumer *hwc);
void iio_hw_consumer_disable(struct iio_hw_consumer *hwc);
--
2.7.4
^ permalink raw reply related
* [PATCH v7 02/13] docs: driver-api: add iio hw consumer section
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
This adds a section about the Hardware consumer
API of the IIO subsystem to the driver API
documentation.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
Documentation/driver-api/iio/hw-consumer.rst | 51 ++++++++++++++++++++++++++++
Documentation/driver-api/iio/index.rst | 1 +
2 files changed, 52 insertions(+)
create mode 100644 Documentation/driver-api/iio/hw-consumer.rst
diff --git a/Documentation/driver-api/iio/hw-consumer.rst b/Documentation/driver-api/iio/hw-consumer.rst
new file mode 100644
index 0000000..8facce6
--- /dev/null
+++ b/Documentation/driver-api/iio/hw-consumer.rst
@@ -0,0 +1,51 @@
+===========
+HW consumer
+===========
+An IIO device can be directly connected to another device in hardware. in this
+case the buffers between IIO provider and IIO consumer are handled by hardware.
+The Industrial I/O HW consumer offers a way to bond these IIO devices without
+software buffer for data. The implementation can be found under
+:file:`drivers/iio/buffer/hw-consumer.c`
+
+
+* struct :c:type:`iio_hw_consumer` ? Hardware consumer structure
+* :c:func:`iio_hw_consumer_alloc` ? Allocate IIO hardware consumer
+* :c:func:`iio_hw_consumer_free` ? Free IIO hardware consumer
+* :c:func:`iio_hw_consumer_enable` ? Enable IIO hardware consumer
+* :c:func:`iio_hw_consumer_disable` ? Disable IIO hardware consumer
+
+
+HW consumer setup
+=================
+
+As standard IIO device the implementation is based on IIO provider/consumer.
+A typical IIO HW consumer setup looks like this::
+
+ static struct iio_hw_consumer *hwc;
+
+ static const struct iio_info adc_info = {
+ .read_raw = adc_read_raw,
+ };
+
+ static int adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+ {
+ ret = iio_hw_consumer_enable(hwc);
+
+ /* Acquire data */
+
+ ret = iio_hw_consumer_disable(hwc);
+ }
+
+ static int adc_probe(struct platform_device *pdev)
+ {
+ hwc = devm_iio_hw_consumer_alloc(&iio->dev);
+ }
+
+More details
+============
+.. kernel-doc:: include/linux/iio/hw-consumer.h
+.. kernel-doc:: drivers/iio/buffer/industrialio-hw-consumer.c
+ :export:
+
diff --git a/Documentation/driver-api/iio/index.rst b/Documentation/driver-api/iio/index.rst
index e5c3922..7fba341 100644
--- a/Documentation/driver-api/iio/index.rst
+++ b/Documentation/driver-api/iio/index.rst
@@ -15,3 +15,4 @@ Contents:
buffers
triggers
triggered-buffers
+ hw-consumer
--
2.7.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox