* Applied "ASoC: cirrus: i2s: Stop enabling I2S2 and I2S3 FIFOs" to the asoc tree
From: Mark Brown @ 2018-05-11 2:37 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180428205142.31921-4-alexander.sverdlin@gmail.com>
The patch
ASoC: cirrus: i2s: Stop enabling I2S2 and I2S3 FIFOs
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From cc27062b3eee3beb2e3830641b23ba9a52a8a04a Mon Sep 17 00:00:00 2001
From: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Date: Sat, 28 Apr 2018 22:51:40 +0200
Subject: [PATCH] ASoC: cirrus: i2s: Stop enabling I2S2 and I2S3 FIFOs
The driver never supported more than 2 channels because of
ep93xx_i2s_dma_data[] supporting only 1 DMA channel in each
direction.
Stop enabling two unused I2S controller FIFOs, this will simplify
future interrupt support.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/cirrus/ep93xx-i2s.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/sound/soc/cirrus/ep93xx-i2s.c b/sound/soc/cirrus/ep93xx-i2s.c
index 0dc3852c4621..42cc6d22baac 100644
--- a/sound/soc/cirrus/ep93xx-i2s.c
+++ b/sound/soc/cirrus/ep93xx-i2s.c
@@ -98,7 +98,6 @@ static inline unsigned ep93xx_i2s_read_reg(struct ep93xx_i2s_info *info,
static void ep93xx_i2s_enable(struct ep93xx_i2s_info *info, int stream)
{
unsigned base_reg;
- int i;
if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
(ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
@@ -111,27 +110,24 @@ static void ep93xx_i2s_enable(struct ep93xx_i2s_info *info, int stream)
ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 1);
}
- /* Enable fifos */
+ /* Enable fifo */
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
base_reg = EP93XX_I2S_TX0EN;
else
base_reg = EP93XX_I2S_RX0EN;
- for (i = 0; i < 3; i++)
- ep93xx_i2s_write_reg(info, base_reg + (i * 4), 1);
+ ep93xx_i2s_write_reg(info, base_reg, 1);
}
static void ep93xx_i2s_disable(struct ep93xx_i2s_info *info, int stream)
{
unsigned base_reg;
- int i;
- /* Disable fifos */
+ /* Disable fifo */
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
base_reg = EP93XX_I2S_TX0EN;
else
base_reg = EP93XX_I2S_RX0EN;
- for (i = 0; i < 3; i++)
- ep93xx_i2s_write_reg(info, base_reg + (i * 4), 0);
+ ep93xx_i2s_write_reg(info, base_reg, 0);
if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
(ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
--
2.17.0
^ permalink raw reply related
* [PATCH 1/2] arm64: defconfig: sync it with savedefconfig
From: Shawn Guo @ 2018-05-11 2:50 UTC (permalink / raw)
To: linux-arm-kernel
Sync the defconfig with savedefconfig with the following commands:
make defconfig
make savedefconfig
cp defconfig arch/arm64/configs/defconfig
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/configs/defconfig | 80 +++++++++++++++++---------------------------
1 file changed, 30 insertions(+), 50 deletions(-)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index ecf613761e78..af0992f2fee7 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -47,6 +47,7 @@ CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_SYNQUACER=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_R8A7795=y
CONFIG_ARCH_R8A7796=y
@@ -57,7 +58,6 @@ CONFIG_ARCH_R8A77995=y
CONFIG_ARCH_STRATIX10=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_SPRD=y
-CONFIG_ARCH_SYNQUACER=y
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_THUNDER2=y
CONFIG_ARCH_UNIPHIER=y
@@ -73,16 +73,16 @@ CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
-CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCIE_KIRIN=y
CONFIG_PCI_AARDVARK=y
CONFIG_PCI_TEGRA=y
CONFIG_PCIE_RCAR=y
-CONFIG_PCIE_ROCKCHIP=m
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_PCI_HOST_THUNDER_PEM=y
CONFIG_PCI_HOST_THUNDER_ECAM=y
+CONFIG_PCIE_ROCKCHIP=m
CONFIG_ARM64_VA_BITS_48=y
CONFIG_SCHED_MC=y
CONFIG_NUMA=y
@@ -101,8 +101,6 @@ CONFIG_HIBERNATION=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARM_CPUIDLE=y
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -110,11 +108,11 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_CPUFREQ_DT=y
+CONFIG_ACPI_CPPC_CPUFREQ=m
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
CONFIG_ARM_SCPI_CPUFREQ=y
CONFIG_ARM_TEGRA186_CPUFREQ=y
-CONFIG_ACPI_CPPC_CPUFREQ=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -223,11 +221,6 @@ CONFIG_SMSC911X=y
CONFIG_SNI_AVE=y
CONFIG_SNI_NETSEC=y
CONFIG_STMMAC_ETH=m
-CONFIG_DWMAC_IPQ806X=m
-CONFIG_DWMAC_MESON=m
-CONFIG_DWMAC_ROCKCHIP=m
-CONFIG_DWMAC_SUNXI=m
-CONFIG_DWMAC_SUN8I=m
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_AT803X_PHY=m
CONFIG_MARVELL_PHY=m
@@ -251,8 +244,8 @@ CONFIG_WL18XX=m
CONFIG_WLCORE_SDIO=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_ADC=m
-CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_CROS_EC=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
CONFIG_INPUT_HISI_POWERKEY=y
@@ -276,15 +269,12 @@ CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=11
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
@@ -303,20 +293,20 @@ CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
-CONFIG_SPI_MESON_SPICC=m
-CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_MESON_SPICC=m
+CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
-CONFIG_SPI_QUP=y
CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_QUP=y
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SPIDEV=m
CONFIG_SPMI=y
-CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8994=y
CONFIG_PINCTRL_MSM8996=y
@@ -343,12 +333,12 @@ CONFIG_SENSORS_INA2XX=m
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
+CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_RCAR_GEN3_THERMAL=y
CONFIG_BRCMSTB_THERMAL=m
CONFIG_EXYNOS_THERMAL=y
-CONFIG_RCAR_GEN3_THERMAL=y
-CONFIG_QCOM_TSENS=y
-CONFIG_ROCKCHIP_THERMAL=m
CONFIG_TEGRA_BPMP_THERMAL=m
+CONFIG_QCOM_TSENS=y
CONFIG_UNIPHIER_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
@@ -368,9 +358,9 @@ CONFIG_MFD_MAX77620=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=y
@@ -380,16 +370,15 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_S2MPS11=y
+CONFIG_RC_CORE=m
+CONFIG_RC_DECODERS=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_MESON=m
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
-CONFIG_MEDIA_RC_SUPPORT=y
-CONFIG_RC_CORE=m
-CONFIG_RC_DEVICES=y
-CONFIG_RC_DECODERS=y
-CONFIG_IR_MESON=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_DVB_NET is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
@@ -414,8 +403,7 @@ CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_LVDS=y
-CONFIG_DRM_RCAR_VSP=y
+CONFIG_DRM_RCAR_LVDS=m
CONFIG_DRM_TEGRA=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
@@ -428,7 +416,6 @@ CONFIG_FB_ARMCLCD=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_LP855X=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -473,12 +460,12 @@ CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_MESON_GX=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_SPI=y
@@ -495,11 +482,11 @@ CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_PANIC=y
-CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_EDAC=y
CONFIG_EDAC_GHES=y
CONFIG_RTC_CLASS=y
@@ -569,7 +556,6 @@ CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_ARCH_TEGRA_194_SOC=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_MEMORY=y
-CONFIG_TEGRA_MC=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_ROCKCHIP_SARADC=m
@@ -581,22 +567,22 @@ CONFIG_PWM_RCAR=m
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_TEGRA=m
-CONFIG_PHY_RCAR_GEN3_USB2=y
-CONFIG_PHY_RCAR_GEN3_USB3=m
-CONFIG_PHY_HI6220_USB=y
-CONFIG_PHY_QCOM_USB_HS=y
+CONFIG_PHY_XGENE=y
CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_MVEBU_CP110_COMPHY=y
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_QCOM_USB_HS=y
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_RCAR_GEN3_USB3=m
CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_PCIE=m
-CONFIG_PHY_XGENE=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
-CONFIG_MESON_EFUSE=m
CONFIG_QCOM_QFPROM=y
CONFIG_UNIPHIER_EFUSE=y
+CONFIG_MESON_EFUSE=m
CONFIG_TEE=y
CONFIG_OPTEE=y
CONFIG_ARM_SCPI_PROTOCOL=y
@@ -640,7 +626,6 @@ CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
@@ -649,20 +634,15 @@ CONFIG_SECURITY=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_ARM64_CRYPTO=y
-CONFIG_CRYPTO_SHA256_ARM64=m
-CONFIG_CRYPTO_SHA512_ARM64=m
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA512_ARM64_CE=m
+CONFIG_CRYPTO_SHA3_ARM64=m
+CONFIG_CRYPTO_SM3_ARM64_CE=m
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
CONFIG_CRYPTO_CRC32_ARM64_CE=m
-CONFIG_CRYPTO_AES_ARM64=m
-CONFIG_CRYPTO_AES_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_AES_ARM64_BS=m
-CONFIG_CRYPTO_SHA512_ARM64_CE=m
-CONFIG_CRYPTO_SHA3_ARM64=m
-CONFIG_CRYPTO_SM3_ARM64_CE=m
--
1.9.1
^ permalink raw reply related
* [PATCH 2/2] arm64: defconfig: enable drivers for Poplar support
From: Shawn Guo @ 2018-05-11 2:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526007049-27884-1-git-send-email-shawn.guo@linaro.org>
It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe
for Hi3798CV200 Poplar platform.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm64/configs/defconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index af0992f2fee7..78e3f1492b9b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -75,6 +75,7 @@ CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_KIRIN=y
+CONFIG_PCIE_HISI_STB=y
CONFIG_PCI_AARDVARK=y
CONFIG_PCI_TEGRA=y
CONFIG_PCIE_RCAR=y
@@ -206,6 +207,7 @@ CONFIG_AMD_XGBE=y
CONFIG_NET_XGENE=y
CONFIG_MACB=y
CONFIG_THUNDER_NIC_PF=y
+CONFIG_HIX5HD2_GMAC=y
CONFIG_HNS_DSAF=y
CONFIG_HNS_ENET=y
CONFIG_E1000E=y
@@ -472,6 +474,7 @@ CONFIG_MMC_SPI=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_HI3798CV200=y
CONFIG_MMC_DW_K3=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SUNXI=y
@@ -570,6 +573,8 @@ CONFIG_PWM_TEGRA=m
CONFIG_PHY_XGENE=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_HISTB_COMBPHY=y
+CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_MVEBU_CP110_COMPHY=y
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_RCAR_GEN3_USB2=y
--
1.9.1
^ permalink raw reply related
* [PATCH v2] bpf, arm32: Fix inconsistent naming about emit_a32_lsr_r64|emit_a32_lsr_i64
From: Wang YanQing @ 2018-05-11 2:52 UTC (permalink / raw)
To: linux-arm-kernel
The names for BPF_ALU64 | BPF_ARSH are emit_a32_arsh_*,
the names for BPF_ALU64 | BPF_LSH are emit_a32_lsh_*, but
the names for BPF_ALU64 | BPF_RSH are emit_a32_lsr_*.
For consistence reason, let's rename emit_a32_lsr_* to
emit_a32_rsh_*.
This patch also correct a wrong comment.
Signed-off-by: Wang YanQing <udknight@gmail.com>
---
Changes v1-v2:
1:Rewords the changelog.
arch/arm/net/bpf_jit_32.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index b5030e1..caccc78 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -708,7 +708,7 @@ static inline void emit_a32_arsh_r64(const u8 dst[], const u8 src[], bool dstk,
}
/* dst = dst >> src */
-static inline void emit_a32_lsr_r64(const u8 dst[], const u8 src[], bool dstk,
+static inline void emit_a32_rsh_r64(const u8 dst[], const u8 src[], bool dstk,
bool sstk, struct jit_ctx *ctx) {
const u8 *tmp = bpf2a32[TMP_REG_1];
const u8 *tmp2 = bpf2a32[TMP_REG_2];
@@ -724,7 +724,7 @@ static inline void emit_a32_lsr_r64(const u8 dst[], const u8 src[], bool dstk,
emit(ARM_LDR_I(rm, ARM_SP, STACK_VAR(dst_hi)), ctx);
}
- /* Do LSH operation */
+ /* Do RSH operation */
emit(ARM_RSB_I(ARM_IP, rt, 32), ctx);
emit(ARM_SUBS_I(tmp2[0], rt, 32), ctx);
emit(ARM_MOV_SR(ARM_LR, rd, SRTYPE_LSR, rt), ctx);
@@ -774,7 +774,7 @@ static inline void emit_a32_lsh_i64(const u8 dst[], bool dstk,
}
/* dst = dst >> val */
-static inline void emit_a32_lsr_i64(const u8 dst[], bool dstk,
+static inline void emit_a32_rsh_i64(const u8 dst[], bool dstk,
const u32 val, struct jit_ctx *ctx) {
const u8 *tmp = bpf2a32[TMP_REG_1];
const u8 *tmp2 = bpf2a32[TMP_REG_2];
@@ -1330,7 +1330,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
case BPF_ALU64 | BPF_RSH | BPF_K:
if (unlikely(imm > 63))
return -EINVAL;
- emit_a32_lsr_i64(dst, dstk, imm, ctx);
+ emit_a32_rsh_i64(dst, dstk, imm, ctx);
break;
/* dst = dst << src */
case BPF_ALU64 | BPF_LSH | BPF_X:
@@ -1338,7 +1338,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
break;
/* dst = dst >> src */
case BPF_ALU64 | BPF_RSH | BPF_X:
- emit_a32_lsr_r64(dst, src, dstk, sstk, ctx);
+ emit_a32_rsh_r64(dst, src, dstk, sstk, ctx);
break;
/* dst = dst >> src (signed) */
case BPF_ALU64 | BPF_ARSH | BPF_X:
--
1.8.5.6.2.g3d8a54e.dirty
^ permalink raw reply related
* Applied "ASoC: zx-i2s: fix spelling mistake: "timeing" -> "timing"" to the asoc tree
From: Mark Brown @ 2018-05-11 2:55 UTC (permalink / raw)
To: linux-arm-kernel
The patch
ASoC: zx-i2s: fix spelling mistake: "timeing" -> "timing"
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From d165b5a86fcad715aea1f164186224fe0c2f57f3 Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Thu, 10 May 2018 15:58:38 +0100
Subject: [PATCH] ASoC: zx-i2s: fix spelling mistake: "timeing" -> "timing"
Trivial fix to spelling mistake in dev_err message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/zte/zx-i2s.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/zte/zx-i2s.c b/sound/soc/zte/zx-i2s.c
index 9a0565937d1f..b6b056c607fa 100644
--- a/sound/soc/zte/zx-i2s.c
+++ b/sound/soc/zte/zx-i2s.c
@@ -197,7 +197,7 @@ static int zx_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
val |= (ZX_I2S_TIMING_I2S | ZX_I2S_TIMING_LSB_JUSTIF);
break;
default:
- dev_err(cpu_dai->dev, "Unknown i2s timeing\n");
+ dev_err(cpu_dai->dev, "Unknown i2s timing\n");
return -EINVAL;
}
--
2.17.0
^ permalink raw reply related
* [PATCH 1/2] arm64: dts: allwinner: a64: Update Orange Pi Win/Win Plus
From: Samuel Holland @ 2018-05-11 3:01 UTC (permalink / raw)
To: linux-arm-kernel
Enable the following board hardware features:
- Gigabit Ethernet
- SDIO Wi-Fi on mmc1
- SPI flash on spi0
- Status LED
- Dual-role micro-USB connection
Also provide nodes for the UARTs exposed by the 40-pin GPIO header.
A couple of fixes were made:
- Updating a couple of regulators from the schematic
- Marking the CPU's power supply as such
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 141 ++++++++++++++++++++-
1 file changed, 134 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index bf42690a3361..fd0636381d7f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -51,23 +52,97 @@
compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "orangepi:green:status";
+ gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
+ status = "okay";
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
+ status = "okay";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
};
&ehci1 {
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy at 1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <®_dcdc1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dldo2>;
+ vqmmc-supply = <®_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
status = "okay";
};
@@ -89,10 +164,9 @@
#include "axp803.dtsi"
®_aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "afvcc-csi";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-csi";
};
®_aldo2 {
@@ -166,7 +240,13 @@
®_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "cpvdd";
+ regulator-name = "vcc-pc";
+};
+
+®_eldo3 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-csi";
};
®_fldo1 {
@@ -191,13 +271,60 @@
regulator-name = "vcc-rtc";
};
+&spi0 {
+ status = "okay";
+
+ spi-flash at 0 {
+ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+ status = "okay";
+ };
+};
+
+/* On debug connector */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
-&usbphy {
+/* Wi-Fi/BT */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "otg";
status = "okay";
};
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
--
2.16.1
^ permalink raw reply related
* [PATCH 2/2] arm64: dts: allwinner: h5: Update Orange Pi Zero Plus
From: Samuel Holland @ 2018-05-11 3:01 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180511030124.9356-1-samuel@sholland.org>
The Orange Pi Zero Plus has an additional LED that was missing from the
device tree, and the power sequence for the SDIO Wi-Fi was missing.
The board also has UARTs 1, 2, and 3 exposed on a 26-pin GPIO header. As
the header is not populated by the manufacturer, disable the UARTs by
default.
Additionally, fix up an incorrect comment, remove an unnecessary header
inclusion, sort existing nodes, and fix some indentation issues.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../dts/allwinner/sun50i-h5-orangepi-zero-plus.dts | 58 ++++++++++++++++------
1 file changed, 42 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index 1238de25a969..78edcb9d9167 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -10,23 +10,18 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi Zero Plus";
compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5";
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
aliases {
ethernet0 = &emac;
ethernet1 = &rtl8189ftv;
serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
};
chosen {
@@ -38,7 +33,7 @@
pwr {
label = "orangepi:green:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
default-state = "on";
};
@@ -57,6 +52,18 @@
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
};
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ };
};
&ehci0 {
@@ -92,6 +99,7 @@
&mmc1 {
vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
@@ -105,7 +113,15 @@
};
};
-&spi0 {
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&spi0 {
status = "okay";
flash at 0 {
@@ -117,18 +133,28 @@
};
};
-&ohci0 {
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
-&ohci1 {
- status = "okay";
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "disabled";
};
-&uart0 {
+&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
};
&usb_otg {
--
2.16.1
^ permalink raw reply related
* [PATCH v2] bpf, arm32: Correct check_imm24
From: Wang YanQing @ 2018-05-11 3:06 UTC (permalink / raw)
To: linux-arm-kernel
imm24 is signed, so the right range is:
[-(1<<(24 - 1)), (1<<(24 - 1)) - 1]
Note:this patch also fix a typo.
Signed-off-by: Wang YanQing <udknight@gmail.com>
---
Changes
v1-v2:
1:Rewrite the patch, I make a mistake, the v1 is wrong totally,
reported by Russell King.
I use the fix suggested by Russell King instead of myself which
use the exact number range [-8388608, 8388607].
2:Fix the error in changelog.
Thanks!
arch/arm/net/bpf_jit_32.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index caccc78..316bc08 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -84,7 +84,7 @@
*
* 1. First argument is passed using the arm 32bit registers and rest of the
* arguments are passed on stack scratch space.
- * 2. First callee-saved arugument is mapped to arm 32 bit registers and rest
+ * 2. First callee-saved argument is mapped to arm 32 bit registers and rest
* arguments are mapped to scratch space on stack.
* 3. We need two 64 bit temp registers to do complex operations on eBPF
* registers.
@@ -1199,8 +1199,8 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
s32 jmp_offset;
#define check_imm(bits, imm) do { \
- if ((((imm) > 0) && ((imm) >> (bits))) || \
- (((imm) < 0) && (~(imm) >> (bits)))) { \
+ if ((imm) >= (1 << ((bits) - 1)) || \
+ (imm) < -(1 << ((bits) - 1))) { \
pr_info("[%2d] imm=%d(0x%x) out of range\n", \
i, imm, imm); \
return -EINVAL; \
--
1.8.5.6.2.g3d8a54e.dirty
^ permalink raw reply related
* Applied "ASoC: qdsp6: q6common: Add qdsp6 helper functions" to the asoc tree
From: Mark Brown @ 2018-05-11 3:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180501120820.11016-8-srinivas.kandagatla@linaro.org>
The patch
ASoC: qdsp6: q6common: Add qdsp6 helper functions
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 4dddbddbce324dc027182ba33d6cbbaf797dfd9e Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Wed, 9 May 2018 13:56:18 +0100
Subject: [PATCH] ASoC: qdsp6: q6common: Add qdsp6 helper functions
This patch adds some common helper functions like translating dsp error
to linux error codes and channel mappings etc.
These functions are used in all the following qdsp6 drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/qcom/Kconfig | 13 ++++++
sound/soc/qcom/Makefile | 3 ++
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6dsp-common.c | 66 +++++++++++++++++++++++++++++
sound/soc/qcom/qdsp6/q6dsp-common.h | 24 +++++++++++
sound/soc/qcom/qdsp6/q6dsp-errno.h | 51 ++++++++++++++++++++++
6 files changed, 158 insertions(+)
create mode 100644 sound/soc/qcom/qdsp6/Makefile
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-common.c
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-common.h
create mode 100644 sound/soc/qcom/qdsp6/q6dsp-errno.h
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 3cc252e55468..b44a9fcd7ed3 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -40,3 +40,16 @@ config SND_SOC_APQ8016_SBC
Support for Qualcomm Technologies LPASS audio block in
APQ8016 SOC-based systems.
Say Y if you want to use audio devices on MI2S.
+
+config SND_SOC_QDSP6_COMMON
+ tristate
+
+config SND_SOC_QDSP6
+ tristate "SoC ALSA audio driver for QDSP6"
+ depends on QCOM_APR && HAS_DMA
+ select SND_SOC_QDSP6_COMMON
+ help
+ To add support for MSM QDSP6 Soc Audio.
+ This will enable sound soc platform specific
+ audio drivers. This includes q6asm, q6adm,
+ q6afe interfaces to DSP using apr.
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index d5280355c24f..0276717917c0 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -16,3 +16,6 @@ snd-soc-apq8016-sbc-objs := apq8016_sbc.o
obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
+
+#DSP lib
+obj-$(CONFIG_SND_SOC_QDSP6) += qdsp6/
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
new file mode 100644
index 000000000000..accebdb49306
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SND_SOC_QDSP6_COMMON) += q6dsp-common.o
diff --git a/sound/soc/qcom/qdsp6/q6dsp-common.c b/sound/soc/qcom/qdsp6/q6dsp-common.c
new file mode 100644
index 000000000000..d393003492c7
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6dsp-common.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2011-2017, The Linux Foundation. All rights reserved.
+// Copyright (c) 2018, Linaro Limited
+
+#include "q6dsp-common.h"
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+
+int q6dsp_map_channels(u8 ch_map[PCM_MAX_NUM_CHANNEL], int ch)
+{
+ memset(ch_map, 0, PCM_MAX_NUM_CHANNEL);
+
+ switch (ch) {
+ case 1:
+ ch_map[0] = PCM_CHANNEL_FC;
+ break;
+ case 2:
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ break;
+ case 3:
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_FC;
+ break;
+ case 4:
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_LS;
+ ch_map[3] = PCM_CHANNEL_RS;
+ break;
+ case 5:
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_FC;
+ ch_map[3] = PCM_CHANNEL_LS;
+ ch_map[4] = PCM_CHANNEL_RS;
+ break;
+ case 6:
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_LFE;
+ ch_map[3] = PCM_CHANNEL_FC;
+ ch_map[4] = PCM_CHANNEL_LS;
+ ch_map[5] = PCM_CHANNEL_RS;
+ break;
+ case 8:
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_LFE;
+ ch_map[3] = PCM_CHANNEL_FC;
+ ch_map[4] = PCM_CHANNEL_LS;
+ ch_map[5] = PCM_CHANNEL_RS;
+ ch_map[6] = PCM_CHANNEL_LB;
+ ch_map[7] = PCM_CHANNEL_RB;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(q6dsp_map_channels);
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/qcom/qdsp6/q6dsp-common.h b/sound/soc/qcom/qdsp6/q6dsp-common.h
new file mode 100644
index 000000000000..01094d108b8a
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6dsp-common.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __Q6DSP_COMMON_H__
+#define __Q6DSP_COMMON_H__
+
+#include <linux/kernel.h>
+
+#define PCM_MAX_NUM_CHANNEL 8
+#define PCM_CHANNEL_NULL 0
+
+#define PCM_CHANNEL_FL 1 /* Front left channel. */
+#define PCM_CHANNEL_FR 2 /* Front right channel. */
+#define PCM_CHANNEL_FC 3 /* Front center channel. */
+#define PCM_CHANNEL_LS 4 /* Left surround channel. */
+#define PCM_CHANNEL_RS 5 /* Right surround channel. */
+#define PCM_CHANNEL_LFE 6 /* Low frequency effect channel. */
+#define PCM_CHANNEL_CS 7 /* Center surround channel; Rear center ch */
+#define PCM_CHANNEL_LB 8 /* Left back channel; Rear left channel. */
+#define PCM_CHANNEL_RB 9 /* Right back channel; Rear right channel. */
+#define PCM_CHANNELS 10 /* Top surround channel. */
+
+int q6dsp_map_channels(u8 ch_map[PCM_MAX_NUM_CHANNEL], int ch);
+
+#endif /* __Q6DSP_COMMON_H__ */
diff --git a/sound/soc/qcom/qdsp6/q6dsp-errno.h b/sound/soc/qcom/qdsp6/q6dsp-errno.h
new file mode 100644
index 000000000000..1ec00ff8c1d2
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6dsp-errno.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __Q6DSP_ERR_NO_H__
+#define __Q6DSP_ERR_NO_H__
+#include <linux/kernel.h>
+
+/* Success. The operation completed with no errors. */
+#define ADSP_EOK 0x00000000
+/* General failure. */
+#define ADSP_EFAILED 0x00000001
+/* Bad operation parameter. */
+#define ADSP_EBADPARAM 0x00000002
+/* Unsupported routine or operation. */
+#define ADSP_EUNSUPPORTED 0x00000003
+/* Unsupported version. */
+#define ADSP_EVERSION 0x00000004
+/* Unexpected problem encountered. */
+#define ADSP_EUNEXPECTED 0x00000005
+/* Unhandled problem occurred. */
+#define ADSP_EPANIC 0x00000006
+/* Unable to allocate resource. */
+#define ADSP_ENORESOURCE 0x00000007
+/* Invalid handle. */
+#define ADSP_EHANDLE 0x00000008
+/* Operation is already processed. */
+#define ADSP_EALREADY 0x00000009
+/* Operation is not ready to be processed. */
+#define ADSP_ENOTREADY 0x0000000A
+/* Operation is pending completion. */
+#define ADSP_EPENDING 0x0000000B
+/* Operation could not be accepted or processed. */
+#define ADSP_EBUSY 0x0000000C
+/* Operation aborted due to an error. */
+#define ADSP_EABORTED 0x0000000D
+/* Operation preempted by a higher priority. */
+#define ADSP_EPREEMPTED 0x0000000E
+/* Operation requests intervention to complete. */
+#define ADSP_ECONTINUE 0x0000000F
+/* Operation requests immediate intervention to complete. */
+#define ADSP_EIMMEDIATE 0x00000010
+/* Operation is not implemented. */
+#define ADSP_ENOTIMPL 0x00000011
+/* Operation needs more data or resources. */
+#define ADSP_ENEEDMORE 0x00000012
+/* Operation does not have memory. */
+#define ADSP_ENOMEMORY 0x00000014
+/* Item does not exist. */
+#define ADSP_ENOTEXIST 0x00000015
+/* Max count for adsp error code sent to HLOS*/
+
+#endif /*__Q6DSP_ERR_NO_H__ */
--
2.17.0
^ permalink raw reply related
* Applied "ASoC: qdsp6: dt-bindings: Add q6asm dt bindings" to the asoc tree
From: Mark Brown @ 2018-05-11 3:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180426094606.4775-7-srinivas.kandagatla@linaro.org>
The patch
ASoC: qdsp6: dt-bindings: Add q6asm dt bindings
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 0e17e9820319c012c80ebba0a6df07d6a3a03ab3 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Wed, 9 May 2018 13:56:17 +0100
Subject: [PATCH] ASoC: qdsp6: dt-bindings: Add q6asm dt bindings
This patch add DT bindings for ASM (Audio Stream Manager) DSP module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/sound/qcom,q6asm.txt | 33 +++++++++++++++++++
include/dt-bindings/sound/qcom,q6asm.h | 22 +++++++++++++
2 files changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6asm.txt
create mode 100644 include/dt-bindings/sound/qcom,q6asm.h
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
new file mode 100644
index 000000000000..2178eb91146f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
@@ -0,0 +1,33 @@
+Qualcomm Audio Stream Manager (Q6ASM) binding
+
+Q6ASM is one of the APR audio service on Q6DSP.
+Please refer to qcom,apr.txt for details of the common apr service bindings
+used by the apr service device.
+
+- but must contain the following property:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
+ Or "qcom,q6asm" where the version number can be queried
+ from DSP.
+ example "qcom,q6asm-v2.0"
+
+= ASM DAIs (Digial Audio Interface)
+"dais" subnode of the ASM node represents dai specific configuration
+
+- #sound-dai-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 1
+
+= EXAMPLE
+
+q6asm at 7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ q6asmdai: dais {
+ #sound-dai-cells = <1>;
+ };
+};
diff --git a/include/dt-bindings/sound/qcom,q6asm.h b/include/dt-bindings/sound/qcom,q6asm.h
new file mode 100644
index 000000000000..1eb77d87c2e8
--- /dev/null
+++ b/include/dt-bindings/sound/qcom,q6asm.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_Q6_ASM_H__
+#define __DT_BINDINGS_Q6_ASM_H__
+
+#define MSM_FRONTEND_DAI_MULTIMEDIA1 0
+#define MSM_FRONTEND_DAI_MULTIMEDIA2 1
+#define MSM_FRONTEND_DAI_MULTIMEDIA3 2
+#define MSM_FRONTEND_DAI_MULTIMEDIA4 3
+#define MSM_FRONTEND_DAI_MULTIMEDIA5 4
+#define MSM_FRONTEND_DAI_MULTIMEDIA6 5
+#define MSM_FRONTEND_DAI_MULTIMEDIA7 6
+#define MSM_FRONTEND_DAI_MULTIMEDIA8 7
+#define MSM_FRONTEND_DAI_MULTIMEDIA9 8
+#define MSM_FRONTEND_DAI_MULTIMEDIA10 9
+#define MSM_FRONTEND_DAI_MULTIMEDIA11 10
+#define MSM_FRONTEND_DAI_MULTIMEDIA12 11
+#define MSM_FRONTEND_DAI_MULTIMEDIA13 12
+#define MSM_FRONTEND_DAI_MULTIMEDIA14 13
+#define MSM_FRONTEND_DAI_MULTIMEDIA15 14
+#define MSM_FRONTEND_DAI_MULTIMEDIA16 15
+
+#endif /* __DT_BINDINGS_Q6_ASM_H__ */
--
2.17.0
^ permalink raw reply related
* Applied "ASoC: qdsp6: dt-bindings: Add q6adm dt bindings" to the asoc tree
From: Mark Brown @ 2018-05-11 3:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180426094606.4775-6-srinivas.kandagatla@linaro.org>
The patch
ASoC: qdsp6: dt-bindings: Add q6adm dt bindings
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 364b8768182abc40603dca05cbe2bea0a0a851a0 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Wed, 9 May 2018 13:56:16 +0100
Subject: [PATCH] ASoC: qdsp6: dt-bindings: Add q6adm dt bindings
This patch add DT bindings for ADM (Audio Device Manager) DSP module.
This module implements mixer controls to setup the connections between
AFE ports and ASM streams.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/sound/qcom,q6adm.txt | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6adm.txt
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
new file mode 100644
index 000000000000..cb709e5dbc44
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
@@ -0,0 +1,33 @@
+Qualcomm Audio Device Manager (Q6ADM) binding
+
+Q6ADM is one of the APR audio service on Q6DSP.
+Please refer to qcom,apr.txt for details of the coommon apr service bindings
+used by the apr service device.
+
+- but must contain the following property:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
+ Or "qcom,q6adm" where the version number can be queried
+ from DSP.
+ example "qcom,q6adm-v2.0"
+
+
+= ADM routing
+"routing" subnode of the ADM node represents adm routing specific configuration
+
+- #sound-dai-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 0
+
+= EXAMPLE
+q6adm at 8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ q6routing: routing {
+ #sound-dai-cells = <0>;
+ };
+};
--
2.17.0
^ permalink raw reply related
* Applied "ASoC: qdsp6: dt-bindings: Add q6afe dt bindings" to the asoc tree
From: Mark Brown @ 2018-05-11 3:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180501120820.11016-5-srinivas.kandagatla@linaro.org>
The patch
ASoC: qdsp6: dt-bindings: Add q6afe dt bindings
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 6ad2ef6530bcb9ab838975c1587c527bed422fbe Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Wed, 9 May 2018 13:56:15 +0100
Subject: [PATCH] ASoC: qdsp6: dt-bindings: Add q6afe dt bindings
This patch add DT bindings for AFE (Audio Frontend) DSP module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/sound/qcom,q6afe.txt | 104 ++++++++++++++++++
include/dt-bindings/sound/qcom,q6afe.h | 31 ++++++
2 files changed, 135 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6afe.txt
create mode 100644 include/dt-bindings/sound/qcom,q6afe.h
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
new file mode 100644
index 000000000000..14335a08b963
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -0,0 +1,104 @@
+Qualcomm Audio Front End (Q6AFE) binding
+
+AFE is one of the APR audio service on Q6DSP
+Please refer to qcom,apr.txt for details of the common apr service bindings
+used by all apr services. Must contain the following properties.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>"
+ Or "qcom,q6afe" where the version number can be queried
+ from DSP.
+ example "qcom,q6afe"
+
+= AFE DAIs (Digial Audio Interface)
+"dais" subnode of the AFE node. It represents afe dais, each afe dai is a
+subnode of "dais" representing board specific dai setup.
+"dais" node should have following properties followed by dai children.
+
+- #sound-dai-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 1
+
+- #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 1
+
+- #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: Must be 0
+
+== AFE DAI is subnode of "dais" and represent a dai, it includes board specific
+configuration of each dai. Must contain the following properties.
+
+- reg
+ Usage: required
+ Value type: <u32>
+ Definition: Must be dai id
+
+- qcom,sd-lines
+ Usage: required for mi2s interface
+ Value type: <prop-encoded-array>
+ Definition: Must be list of serial data lines used by this dai.
+ should be one or more of the 1-4 sd lines.
+
+= EXAMPLE
+
+q6afe at 4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+
+ dais {
+ #sound-dai-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi at 1 {
+ reg = <1>;
+ };
+
+ prim-mi2s-rx at 16 {
+ reg = <16>;
+ qcom,sd-lines = <1 3>;
+ };
+
+ prim-mi2s-tx at 17 {
+ reg = <17>;
+ qcom,sd-lines = <2>;
+ };
+
+ sec-mi2s-rx at 18 {
+ reg = <18>;
+ qcom,sd-lines = <1 4>;
+ };
+
+ sec-mi2s-tx at 19 {
+ reg = <19>;
+ qcom,sd-lines = <2>;
+ };
+
+ tert-mi2s-rx at 20 {
+ reg = <20>;
+ qcom,sd-lines = <2 4>;
+ };
+
+ tert-mi2s-tx at 21 {
+ reg = <21>;
+ qcom,sd-lines = <1>;
+ };
+
+ quat-mi2s-rx at 22 {
+ reg = <22>;
+ qcom,sd-lines = <1>;
+ };
+
+ quat-mi2s-tx at 23 {
+ reg = <23>;
+ qcom,sd-lines = <2>;
+ };
+ };
+};
diff --git a/include/dt-bindings/sound/qcom,q6afe.h b/include/dt-bindings/sound/qcom,q6afe.h
new file mode 100644
index 000000000000..e162045f5dc9
--- /dev/null
+++ b/include/dt-bindings/sound/qcom,q6afe.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_Q6_AFE_H__
+#define __DT_BINDINGS_Q6_AFE_H__
+
+/* Audio Front End (AFE) virtual ports IDs */
+#define HDMI_RX 1
+#define SLIMBUS_0_RX 2
+#define SLIMBUS_0_TX 3
+#define SLIMBUS_1_RX 4
+#define SLIMBUS_1_TX 5
+#define SLIMBUS_2_RX 6
+#define SLIMBUS_2_TX 7
+#define SLIMBUS_3_RX 8
+#define SLIMBUS_3_TX 9
+#define SLIMBUS_4_RX 10
+#define SLIMBUS_4_TX 11
+#define SLIMBUS_5_RX 12
+#define SLIMBUS_5_TX 13
+#define SLIMBUS_6_RX 14
+#define SLIMBUS_6_TX 15
+#define PRIMARY_MI2S_RX 16
+#define PRIMARY_MI2S_TX 17
+#define SECONDARY_MI2S_RX 18
+#define SECONDARY_MI2S_TX 19
+#define TERTIARY_MI2S_RX 20
+#define TERTIARY_MI2S_TX 21
+#define QUATERNARY_MI2S_RX 22
+#define QUATERNARY_MI2S_TX 23
+
+#endif /* __DT_BINDINGS_Q6_AFE_H__ */
+
--
2.17.0
^ permalink raw reply related
* Applied "ASoC: qdsp6: dt-bindings: Add q6core dt bindings" to the asoc tree
From: Mark Brown @ 2018-05-11 3:18 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180509125635.5653-4-srinivas.kandagatla@linaro.org>
The patch
ASoC: qdsp6: dt-bindings: Add q6core dt bindings
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 8c943ef123669b0c4100d69039326696c1662d60 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Wed, 9 May 2018 13:56:14 +0100
Subject: [PATCH] ASoC: qdsp6: dt-bindings: Add q6core dt bindings
This patch add DT bindings for Q6CORE DSP module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/sound/qcom,q6core.txt | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6core.txt
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
new file mode 100644
index 000000000000..7f36ff8bec18
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
@@ -0,0 +1,21 @@
+Qualcomm ADSP Core service binding
+
+Q6CORE is one of the APR audio service on Q6DSP.
+Please refer to qcom,apr.txt for details of the common apr service bindings
+used by the apr service device.
+
+- but must contain the following property:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,q6core-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
+ Or "qcom,q6core" where the version number can be queried
+ from DSP.
+ example "qcom,q6core-v2.0"
+
+= EXAMPLE
+q6core at 3 {
+ compatible = "qcom,q6core";
+ reg = <APR_SVC_ADSP_CORE>;
+};
--
2.17.0
^ permalink raw reply related
* Applied "soc: qcom: Add APR bus driver" to the asoc tree
From: Mark Brown @ 2018-05-11 3:18 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180501120820.11016-3-srinivas.kandagatla@linaro.org>
The patch
soc: qcom: Add APR bus driver
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 6adba21eb434d8160da05507c564c2339f4afdda Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Wed, 9 May 2018 13:56:13 +0100
Subject: [PATCH] soc: qcom: Add APR bus driver
This patch adds support to APR bus (Asynchronous Packet Router) driver.
APR driver is made as a bus driver so that the apr devices can added removed
more dynamically depending on the state of the services on the dsp.
APR is used for communication between application processor and QDSP to
use services on QDSP like Audio and others.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/soc/qcom/Kconfig | 9 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/apr.c | 378 ++++++++++++++++++++++++++++++++
include/linux/mod_devicetable.h | 11 +
include/linux/soc/qcom/apr.h | 128 +++++++++++
5 files changed, 527 insertions(+)
create mode 100644 drivers/soc/qcom/apr.c
create mode 100644 include/linux/soc/qcom/apr.h
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 5c4535b545cc..d053f2634c67 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -108,4 +108,13 @@ config QCOM_WCNSS_CTRL
Client driver for the WCNSS_CTRL SMD channel, used to download nv
firmware to a newly booted WCNSS chip.
+config QCOM_APR
+ tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
+ depends on ARCH_QCOM
+ depends on RPMSG
+ help
+ Enable APR IPC protocol support between
+ application processor and QDSP6. APR is
+ used by audio driver to configure QDSP6
+ ASM, ADM and AFE modules.
endmenu
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index dcebf2814e6d..39de5dee55d9 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
+obj-$(CONFIG_QCOM_APR) += apr.o
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
new file mode 100644
index 000000000000..97f3622da535
--- /dev/null
+++ b/drivers/soc/qcom/apr.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2011-2017, The Linux Foundation. All rights reserved.
+// Copyright (c) 2018, Linaro Limited
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/soc/qcom/apr.h>
+#include <linux/rpmsg.h>
+#include <linux/of.h>
+
+struct apr {
+ struct rpmsg_endpoint *ch;
+ struct device *dev;
+ spinlock_t svcs_lock;
+ struct idr svcs_idr;
+ int dest_domain_id;
+};
+
+/**
+ * apr_send_pkt() - Send a apr message from apr device
+ *
+ * @adev: Pointer to previously registered apr device.
+ * @pkt: Pointer to apr packet to send
+ *
+ * Return: Will be an negative on packet size on success.
+ */
+int apr_send_pkt(struct apr_device *adev, struct apr_pkt *pkt)
+{
+ struct apr *apr = dev_get_drvdata(adev->dev.parent);
+ struct apr_hdr *hdr;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&adev->lock, flags);
+
+ hdr = &pkt->hdr;
+ hdr->src_domain = APR_DOMAIN_APPS;
+ hdr->src_svc = adev->svc_id;
+ hdr->dest_domain = adev->domain_id;
+ hdr->dest_svc = adev->svc_id;
+
+ ret = rpmsg_trysend(apr->ch, pkt, hdr->pkt_size);
+ spin_unlock_irqrestore(&adev->lock, flags);
+
+ return ret ? ret : hdr->pkt_size;
+}
+EXPORT_SYMBOL_GPL(apr_send_pkt);
+
+static void apr_dev_release(struct device *dev)
+{
+ struct apr_device *adev = to_apr_device(dev);
+
+ kfree(adev);
+}
+
+static int apr_callback(struct rpmsg_device *rpdev, void *buf,
+ int len, void *priv, u32 addr)
+{
+ struct apr *apr = dev_get_drvdata(&rpdev->dev);
+ uint16_t hdr_size, msg_type, ver, svc_id;
+ struct apr_device *svc = NULL;
+ struct apr_driver *adrv = NULL;
+ struct apr_resp_pkt resp;
+ struct apr_hdr *hdr;
+ unsigned long flags;
+
+ if (len <= APR_HDR_SIZE) {
+ dev_err(apr->dev, "APR: Improper apr pkt received:%p %d\n",
+ buf, len);
+ return -EINVAL;
+ }
+
+ hdr = buf;
+ ver = APR_HDR_FIELD_VER(hdr->hdr_field);
+ if (ver > APR_PKT_VER + 1)
+ return -EINVAL;
+
+ hdr_size = APR_HDR_FIELD_SIZE_BYTES(hdr->hdr_field);
+ if (hdr_size < APR_HDR_SIZE) {
+ dev_err(apr->dev, "APR: Wrong hdr size:%d\n", hdr_size);
+ return -EINVAL;
+ }
+
+ if (hdr->pkt_size < APR_HDR_SIZE || hdr->pkt_size != len) {
+ dev_err(apr->dev, "APR: Wrong paket size\n");
+ return -EINVAL;
+ }
+
+ msg_type = APR_HDR_FIELD_MT(hdr->hdr_field);
+ if (msg_type >= APR_MSG_TYPE_MAX && msg_type != APR_BASIC_RSP_RESULT) {
+ dev_err(apr->dev, "APR: Wrong message type: %d\n", msg_type);
+ return -EINVAL;
+ }
+
+ if (hdr->src_domain >= APR_DOMAIN_MAX ||
+ hdr->dest_domain >= APR_DOMAIN_MAX ||
+ hdr->src_svc >= APR_SVC_MAX ||
+ hdr->dest_svc >= APR_SVC_MAX) {
+ dev_err(apr->dev, "APR: Wrong APR header\n");
+ return -EINVAL;
+ }
+
+ svc_id = hdr->dest_svc;
+ spin_lock_irqsave(&apr->svcs_lock, flags);
+ svc = idr_find(&apr->svcs_idr, svc_id);
+ if (svc && svc->dev.driver)
+ adrv = to_apr_driver(svc->dev.driver);
+ spin_unlock_irqrestore(&apr->svcs_lock, flags);
+
+ if (!adrv) {
+ dev_err(apr->dev, "APR: service is not registered\n");
+ return -EINVAL;
+ }
+
+ resp.hdr = *hdr;
+ resp.payload_size = hdr->pkt_size - hdr_size;
+
+ /*
+ * NOTE: hdr_size is not same as APR_HDR_SIZE as remote can include
+ * optional headers in to apr_hdr which should be ignored
+ */
+ if (resp.payload_size > 0)
+ resp.payload = buf + hdr_size;
+
+ adrv->callback(svc, &resp);
+
+ return 0;
+}
+
+static int apr_device_match(struct device *dev, struct device_driver *drv)
+{
+ struct apr_device *adev = to_apr_device(dev);
+ struct apr_driver *adrv = to_apr_driver(drv);
+ const struct apr_device_id *id = adrv->id_table;
+
+ /* Attempt an OF style match first */
+ if (of_driver_match_device(dev, drv))
+ return 1;
+
+ if (!id)
+ return 0;
+
+ while (id->domain_id != 0 || id->svc_id != 0) {
+ if (id->domain_id == adev->domain_id &&
+ id->svc_id == adev->svc_id)
+ return 1;
+ id++;
+ }
+
+ return 0;
+}
+
+static int apr_device_probe(struct device *dev)
+{
+ struct apr_device *adev = to_apr_device(dev);
+ struct apr_driver *adrv = to_apr_driver(dev->driver);
+
+ return adrv->probe(adev);
+}
+
+static int apr_device_remove(struct device *dev)
+{
+ struct apr_device *adev = to_apr_device(dev);
+ struct apr_driver *adrv;
+ struct apr *apr = dev_get_drvdata(adev->dev.parent);
+
+ if (dev->driver) {
+ adrv = to_apr_driver(dev->driver);
+ if (adrv->remove)
+ adrv->remove(adev);
+ spin_lock(&apr->svcs_lock);
+ idr_remove(&apr->svcs_idr, adev->svc_id);
+ spin_unlock(&apr->svcs_lock);
+ }
+
+ return 0;
+}
+
+static int apr_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct apr_device *adev = to_apr_device(dev);
+ int ret;
+
+ ret = of_device_uevent_modalias(dev, env);
+ if (ret != -ENODEV)
+ return ret;
+
+ return add_uevent_var(env, "MODALIAS=apr:%s", adev->name);
+}
+
+struct bus_type aprbus = {
+ .name = "aprbus",
+ .match = apr_device_match,
+ .probe = apr_device_probe,
+ .uevent = apr_uevent,
+ .remove = apr_device_remove,
+};
+EXPORT_SYMBOL_GPL(aprbus);
+
+static int apr_add_device(struct device *dev, struct device_node *np,
+ const struct apr_device_id *id)
+{
+ struct apr *apr = dev_get_drvdata(dev);
+ struct apr_device *adev = NULL;
+ int ret;
+
+ adev = kzalloc(sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ spin_lock_init(&adev->lock);
+
+ adev->svc_id = id->svc_id;
+ adev->domain_id = id->domain_id;
+ adev->version = id->svc_version;
+ if (np)
+ strncpy(adev->name, np->name, APR_NAME_SIZE);
+ else
+ strncpy(adev->name, id->name, APR_NAME_SIZE);
+
+ dev_set_name(&adev->dev, "aprsvc:%s:%x:%x", adev->name,
+ id->domain_id, id->svc_id);
+
+ adev->dev.bus = &aprbus;
+ adev->dev.parent = dev;
+ adev->dev.of_node = np;
+ adev->dev.release = apr_dev_release;
+ adev->dev.driver = NULL;
+
+ spin_lock(&apr->svcs_lock);
+ idr_alloc(&apr->svcs_idr, adev, id->svc_id,
+ id->svc_id + 1, GFP_ATOMIC);
+ spin_unlock(&apr->svcs_lock);
+
+ dev_info(dev, "Adding APR dev: %s\n", dev_name(&adev->dev));
+
+ ret = device_register(&adev->dev);
+ if (ret) {
+ dev_err(dev, "device_register failed: %d\n", ret);
+ put_device(&adev->dev);
+ }
+
+ return ret;
+}
+
+static void of_register_apr_devices(struct device *dev)
+{
+ struct apr *apr = dev_get_drvdata(dev);
+ struct device_node *node;
+
+ for_each_child_of_node(dev->of_node, node) {
+ struct apr_device_id id = { {0} };
+
+ if (of_property_read_u32(node, "reg", &id.svc_id))
+ continue;
+
+ id.domain_id = apr->dest_domain_id;
+
+ if (apr_add_device(dev, node, &id))
+ dev_err(dev, "Failed to add apr %d svc\n", id.svc_id);
+ }
+}
+
+static int apr_probe(struct rpmsg_device *rpdev)
+{
+ struct device *dev = &rpdev->dev;
+ struct apr *apr;
+ int ret;
+
+ apr = devm_kzalloc(dev, sizeof(*apr), GFP_KERNEL);
+ if (!apr)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(dev->of_node, "reg", &apr->dest_domain_id);
+ if (ret) {
+ dev_err(dev, "APR Domain ID not specified in DT\n");
+ return ret;
+ }
+
+ dev_set_drvdata(dev, apr);
+ apr->ch = rpdev->ept;
+ apr->dev = dev;
+ spin_lock_init(&apr->svcs_lock);
+ idr_init(&apr->svcs_idr);
+ of_register_apr_devices(dev);
+
+ return 0;
+}
+
+static int apr_remove_device(struct device *dev, void *null)
+{
+ struct apr_device *adev = to_apr_device(dev);
+
+ device_unregister(&adev->dev);
+
+ return 0;
+}
+
+static void apr_remove(struct rpmsg_device *rpdev)
+{
+ device_for_each_child(&rpdev->dev, NULL, apr_remove_device);
+}
+
+/*
+ * __apr_driver_register() - Client driver registration with aprbus
+ *
+ * @drv:Client driver to be associated with client-device.
+ * @owner: owning module/driver
+ *
+ * This API will register the client driver with the aprbus
+ * It is called from the driver's module-init function.
+ */
+int __apr_driver_register(struct apr_driver *drv, struct module *owner)
+{
+ drv->driver.bus = &aprbus;
+ drv->driver.owner = owner;
+
+ return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__apr_driver_register);
+
+/*
+ * apr_driver_unregister() - Undo effect of apr_driver_register
+ *
+ * @drv: Client driver to be unregistered
+ */
+void apr_driver_unregister(struct apr_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(apr_driver_unregister);
+
+static const struct of_device_id apr_of_match[] = {
+ { .compatible = "qcom,apr"},
+ { .compatible = "qcom,apr-v2"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, apr_of_match);
+
+static struct rpmsg_driver apr_driver = {
+ .probe = apr_probe,
+ .remove = apr_remove,
+ .callback = apr_callback,
+ .drv = {
+ .name = "qcom,apr",
+ .of_match_table = apr_of_match,
+ },
+};
+
+static int __init apr_init(void)
+{
+ int ret;
+
+ ret = bus_register(&aprbus);
+ if (!ret)
+ ret = register_rpmsg_driver(&apr_driver);
+ else
+ bus_unregister(&aprbus);
+
+ return ret;
+}
+
+static void __exit apr_exit(void)
+{
+ bus_unregister(&aprbus);
+ unregister_rpmsg_driver(&apr_driver);
+}
+
+subsys_initcall(apr_init);
+module_exit(apr_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Qualcomm APR Bus");
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 7d361be2e24f..2014bd19f28e 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -471,6 +471,17 @@ struct slim_device_id {
kernel_ulong_t driver_data;
};
+#define APR_NAME_SIZE 32
+#define APR_MODULE_PREFIX "apr:"
+
+struct apr_device_id {
+ char name[APR_NAME_SIZE];
+ __u32 domain_id;
+ __u32 svc_id;
+ __u32 svc_version;
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
#define SPMI_NAME_SIZE 32
#define SPMI_MODULE_PREFIX "spmi:"
diff --git a/include/linux/soc/qcom/apr.h b/include/linux/soc/qcom/apr.h
new file mode 100644
index 000000000000..c5d52e2cb275
--- /dev/null
+++ b/include/linux/soc/qcom/apr.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __QCOM_APR_H_
+#define __QCOM_APR_H_
+
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <dt-bindings/soc/qcom,apr.h>
+
+extern struct bus_type aprbus;
+
+#define APR_HDR_LEN(hdr_len) ((hdr_len)/4)
+
+/*
+ * HEADER field
+ * version:0:3
+ * header_size : 4:7
+ * message_type : 8:9
+ * reserved: 10:15
+ */
+#define APR_HDR_FIELD(msg_type, hdr_len, ver)\
+ (((msg_type & 0x3) << 8) | ((hdr_len & 0xF) << 4) | (ver & 0xF))
+
+#define APR_HDR_SIZE sizeof(struct apr_hdr)
+#define APR_SEQ_CMD_HDR_FIELD APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD, \
+ APR_HDR_LEN(APR_HDR_SIZE), \
+ APR_PKT_VER)
+/* Version */
+#define APR_PKT_VER 0x0
+
+/* Command and Response Types */
+#define APR_MSG_TYPE_EVENT 0x0
+#define APR_MSG_TYPE_CMD_RSP 0x1
+#define APR_MSG_TYPE_SEQ_CMD 0x2
+#define APR_MSG_TYPE_NSEQ_CMD 0x3
+#define APR_MSG_TYPE_MAX 0x04
+
+/* APR Basic Response Message */
+#define APR_BASIC_RSP_RESULT 0x000110E8
+#define APR_RSP_ACCEPTED 0x000100BE
+
+struct aprv2_ibasic_rsp_result_t {
+ uint32_t opcode;
+ uint32_t status;
+};
+
+/* hdr field Ver [0:3], Size [4:7], Message type [8:10] */
+#define APR_HDR_FIELD_VER(h) (h & 0x000F)
+#define APR_HDR_FIELD_SIZE(h) ((h & 0x00F0) >> 4)
+#define APR_HDR_FIELD_SIZE_BYTES(h) (((h & 0x00F0) >> 4) * 4)
+#define APR_HDR_FIELD_MT(h) ((h & 0x0300) >> 8)
+
+struct apr_hdr {
+ uint16_t hdr_field;
+ uint16_t pkt_size;
+ uint8_t src_svc;
+ uint8_t src_domain;
+ uint16_t src_port;
+ uint8_t dest_svc;
+ uint8_t dest_domain;
+ uint16_t dest_port;
+ uint32_t token;
+ uint32_t opcode;
+} __packed;
+
+struct apr_pkt {
+ struct apr_hdr hdr;
+ uint8_t payload[];
+};
+
+struct apr_resp_pkt {
+ struct apr_hdr hdr;
+ void *payload;
+ int payload_size;
+};
+
+/* Bits 0 to 15 -- Minor version, Bits 16 to 31 -- Major version */
+#define APR_SVC_MAJOR_VERSION(v) ((v >> 16) & 0xFF)
+#define APR_SVC_MINOR_VERSION(v) (v & 0xFF)
+
+struct apr_device {
+ struct device dev;
+ uint16_t svc_id;
+ uint16_t domain_id;
+ uint32_t version;
+ char name[APR_NAME_SIZE];
+ spinlock_t lock;
+ struct list_head node;
+};
+
+#define to_apr_device(d) container_of(d, struct apr_device, dev)
+
+struct apr_driver {
+ int (*probe)(struct apr_device *sl);
+ int (*remove)(struct apr_device *sl);
+ int (*callback)(struct apr_device *a,
+ struct apr_resp_pkt *d);
+ struct device_driver driver;
+ const struct apr_device_id *id_table;
+};
+
+#define to_apr_driver(d) container_of(d, struct apr_driver, driver)
+
+/*
+ * use a macro to avoid include chaining to get THIS_MODULE
+ */
+#define apr_driver_register(drv) __apr_driver_register(drv, THIS_MODULE)
+
+int __apr_driver_register(struct apr_driver *drv, struct module *owner);
+void apr_driver_unregister(struct apr_driver *drv);
+
+/**
+ * module_apr_driver() - Helper macro for registering a aprbus driver
+ * @__aprbus_driver: aprbus_driver struct
+ *
+ * Helper macro for aprbus drivers which do not do anything special in
+ * module init/exit. This eliminates a lot of boilerplate. Each module
+ * may only use this macro once, and calling it replaces module_init()
+ * and module_exit()
+ */
+#define module_apr_driver(__apr_driver) \
+ module_driver(__apr_driver, apr_driver_register, \
+ apr_driver_unregister)
+
+int apr_send_pkt(struct apr_device *adev, struct apr_pkt *pkt);
+
+#endif /* __QCOM_APR_H_ */
--
2.17.0
^ permalink raw reply related
* Applied "soc: qcom dt-bindings: Add APR bus bindings" to the asoc tree
From: Mark Brown @ 2018-05-11 3:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180426094606.4775-2-srinivas.kandagatla@linaro.org>
The patch
soc: qcom dt-bindings: Add APR bus bindings
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 8675e8d3d1b413dc0e6165d2ce09de4335f7f57a Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Wed, 9 May 2018 13:56:12 +0100
Subject: [PATCH] soc: qcom dt-bindings: Add APR bus bindings
This patch add dt bindings for Qualcomm APR (Asynchronous Packet Router)
bus driver. This bus is used for communicating with DSP which provides
audio and various other services to cpu.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/soc/qcom/qcom,apr.txt | 84 +++++++++++++++++++
include/dt-bindings/soc/qcom,apr.h | 28 +++++++
2 files changed, 112 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
create mode 100644 include/dt-bindings/soc/qcom,apr.h
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
new file mode 100644
index 000000000000..bcc612cc7423
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -0,0 +1,84 @@
+Qualcomm APR (Asynchronous Packet Router) binding
+
+This binding describes the Qualcomm APR. APR is a IPC protocol for
+communication between Application processor and QDSP. APR is mainly
+used for audio/voice services on the QDSP.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
+
+- reg
+ Usage: required
+ Value type: <u32>
+ Definition: Destination processor ID.
+ Possible values are :
+ 1 - APR simulator
+ 2 - PC
+ 3 - MODEM
+ 4 - ADSP
+ 5 - APPS
+ 6 - MODEM2
+ 7 - APPS2
+
+= APR SERVICES
+Each subnode of the APR node represents service tied to this apr. The name
+of the nodes are not important. The properties of these nodes are defined
+by the individual bindings for the specific service
+- All APR services MUST contain the following property:
+
+- reg
+ Usage: required
+ Value type: <u32>
+ Definition: APR Service ID
+ Possible values are :
+ 3 - DSP Core Service
+ 4 - Audio Front End Service.
+ 5 - Voice Stream Manager Service.
+ 6 - Voice processing manager.
+ 7 - Audio Stream Manager Service.
+ 8 - Audio Device Manager Service.
+ 9 - Multimode voice manager.
+ 10 - Core voice stream.
+ 11 - Core voice processor.
+ 12 - Ultrasound stream manager.
+ 13 - Listen stream manager.
+
+= EXAMPLE
+The following example represents a QDSP based sound card on a MSM8996 device
+which uses apr as communication between Apps and QDSP.
+
+ apr at 4 {
+ compatible = "qcom,apr-v2";
+ reg = <APR_DOMAIN_ADSP>;
+
+ q6core at 3 {
+ compatible = "qcom,q6core";
+ reg = <APR_SVC_ADSP_CORE>;
+ };
+
+ q6afe at 4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+
+ dais {
+ #sound-dai-cells = <1>;
+ hdmi at 1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ q6asm at 7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ ...
+ };
+
+ q6adm at 8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ ...
+ };
+ };
diff --git a/include/dt-bindings/soc/qcom,apr.h b/include/dt-bindings/soc/qcom,apr.h
new file mode 100644
index 000000000000..006362400c0f
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,apr.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_QCOM_APR_H
+#define __DT_BINDINGS_QCOM_APR_H
+
+/* Domain IDs */
+#define APR_DOMAIN_SIM 0x1
+#define APR_DOMAIN_PC 0x2
+#define APR_DOMAIN_MODEM 0x3
+#define APR_DOMAIN_ADSP 0x4
+#define APR_DOMAIN_APPS 0x5
+#define APR_DOMAIN_MAX 0x6
+
+/* ADSP service IDs */
+#define APR_SVC_ADSP_CORE 0x3
+#define APR_SVC_AFE 0x4
+#define APR_SVC_VSM 0x5
+#define APR_SVC_VPM 0x6
+#define APR_SVC_ASM 0x7
+#define APR_SVC_ADM 0x8
+#define APR_SVC_ADSP_MVM 0x09
+#define APR_SVC_ADSP_CVS 0x0A
+#define APR_SVC_ADSP_CVP 0x0B
+#define APR_SVC_USM 0x0C
+#define APR_SVC_LSM 0x0D
+#define APR_SVC_VIDC 0x16
+#define APR_SVC_MAX 0x17
+
+#endif /* __DT_BINDINGS_QCOM_APR_H */
--
2.17.0
^ permalink raw reply related
* [PATCH v1 00/13] add power domain support for Rockchip Socs
From: Elaine Zhang @ 2018-05-11 3:30 UTC (permalink / raw)
To: linux-arm-kernel
add power domain support for RK3036/RK3128/RK3228/PX30 Soc.
fix up the wrong value when set power domain up.
Elaine Zhang (13):
dt-bindings: power: add RK3036 SoCs header for power-domain
dt-bindings: add binding for rk3036 power domains
Soc: rockchip: power-domain: add power domain support for rk3036
soc: rockchip: power-domain: Fix wrong value when power up pd
dt-bindings: power: add RK3128 SoCs header for power-domain
dt-bindings: add binding for rk3128 power domains
soc: rockchip: power-domain: add power domain support for rk3128
dt-bindings: power: add RK3228 SoCs header for power-domain
dt-bindings: add binding for rk3228 power domains
soc: rockchip: power-domain: add power domain support for rk3228
dt-bindings: power: add PX30 SoCs header for power-domain
dt-bindings: add binding for px30 power domains
soc: rockchip: power-domain: add power domain support for px30
.../bindings/soc/rockchip/power_domain.txt | 12 +++
drivers/soc/rockchip/pm_domains.c | 116 ++++++++++++++++++++-
include/dt-bindings/power/px30-power.h | 32 ++++++
include/dt-bindings/power/rk3036-power.h | 27 +++++
include/dt-bindings/power/rk3128-power.h | 28 +++++
include/dt-bindings/power/rk3228-power.h | 26 +++++
6 files changed, 240 insertions(+), 1 deletion(-)
create mode 100644 include/dt-bindings/power/px30-power.h
create mode 100644 include/dt-bindings/power/rk3036-power.h
create mode 100644 include/dt-bindings/power/rk3128-power.h
create mode 100644 include/dt-bindings/power/rk3228-power.h
--
1.9.1
^ permalink raw reply
* [PATCH v1 01/13] dt-bindings: power: add RK3036 SoCs header for power-domain
From: Elaine Zhang @ 2018-05-11 3:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526009458-28579-1-git-send-email-zhangqing@rock-chips.com>
According to a description from TRM, add all the power domains.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
include/dt-bindings/power/rk3036-power.h | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 include/dt-bindings/power/rk3036-power.h
diff --git a/include/dt-bindings/power/rk3036-power.h b/include/dt-bindings/power/rk3036-power.h
new file mode 100644
index 000000000000..59e09f1c5af7
--- /dev/null
+++ b/include/dt-bindings/power/rk3036-power.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co. Ltd.
+ * Author: Caesar Wang <wxt@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_POWER_RK3036_POWER_H__
+#define __DT_BINDINGS_POWER_RK3036_POWER_H__
+
+#define RK3036_PD_MSCH 0
+#define RK3036_PD_CORE 1
+#define RK3036_PD_PERI 2
+#define RK3036_PD_VIO 3
+#define RK3036_PD_VPU 4
+#define RK3036_PD_GPU 5
+#define RK3036_PD_SYS 6
+
+#endif
--
1.9.1
^ permalink raw reply related
* [PATCH v1 02/13] dt-bindings: add binding for rk3036 power domains
From: Elaine Zhang @ 2018-05-11 3:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526009458-28579-1-git-send-email-zhangqing@rock-chips.com>
Add binding documentation for the power domains
found on Rockchip RK3036 SoCs.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
Documentation/devicetree/bindings/soc/rockchip/power_domain.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
index 301d2a9bc1b8..79924ee9ae86 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
@@ -5,6 +5,7 @@ powered up/down by software based on different application scenes to save power.
Required properties for power domain controller:
- compatible: Should be one of the following.
+ "rockchip,rk3036-power-controller" - for RK3036 SoCs.
"rockchip,rk3288-power-controller" - for RK3288 SoCs.
"rockchip,rk3328-power-controller" - for RK3328 SoCs.
"rockchip,rk3366-power-controller" - for RK3366 SoCs.
@@ -17,6 +18,7 @@ Required properties for power domain controller:
Required properties for power domain sub nodes:
- reg: index of the power domain, should use macros in:
+ "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
"include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
@@ -93,6 +95,7 @@ Node of a device using power domains must have a power-domains property,
containing a phandle to the power device node and an index specifying which
power domain to use.
The index should use macros in:
+ "include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
"include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
--
1.9.1
^ permalink raw reply related
* [PATCH v1 03/13] Soc: rockchip: power-domain: add power domain support for rk3036
From: Elaine Zhang @ 2018-05-11 3:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526009458-28579-1-git-send-email-zhangqing@rock-chips.com>
This driver is modified to support RK3036 SoC.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
drivers/soc/rockchip/pm_domains.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/soc/rockchip/pm_domains.c b/drivers/soc/rockchip/pm_domains.c
index 53efc386b1ad..ebd7c41898c0 100644
--- a/drivers/soc/rockchip/pm_domains.c
+++ b/drivers/soc/rockchip/pm_domains.c
@@ -18,6 +18,7 @@
#include <linux/clk.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
+#include <dt-bindings/power/rk3036-power.h>
#include <dt-bindings/power/rk3288-power.h>
#include <dt-bindings/power/rk3328-power.h>
#include <dt-bindings/power/rk3366-power.h>
@@ -102,6 +103,14 @@ struct rockchip_pmu {
.ack_mask = (ack >= 0) ? BIT(ack) : 0, \
.active_wakeup = wakeup, \
}
+#define DOMAIN_RK3036(req, ack, idle, wakeup) \
+{ \
+ .req_mask = (req >= 0) ? BIT(req) : 0, \
+ .req_w_mask = (req >= 0) ? BIT(req + 16) : 0, \
+ .ack_mask = (ack >= 0) ? BIT(ack) : 0, \
+ .idle_mask = (idle >= 0) ? BIT(idle) : 0, \
+ .active_wakeup = wakeup, \
+}
#define DOMAIN_RK3288(pwr, status, req, wakeup) \
DOMAIN(pwr, status, req, req, (req) + 16, wakeup)
@@ -701,6 +710,16 @@ static int rockchip_pm_domain_probe(struct platform_device *pdev)
return error;
}
+static const struct rockchip_domain_info rk3036_pm_domains[] = {
+ [RK3036_PD_MSCH] = DOMAIN_RK3036(14, 23, 30, true),
+ [RK3036_PD_CORE] = DOMAIN_RK3036(13, 17, 24, false),
+ [RK3036_PD_PERI] = DOMAIN_RK3036(12, 18, 25, false),
+ [RK3036_PD_VIO] = DOMAIN_RK3036(11, 19, 26, false),
+ [RK3036_PD_VPU] = DOMAIN_RK3036(10, 20, 27, false),
+ [RK3036_PD_GPU] = DOMAIN_RK3036(9, 21, 28, false),
+ [RK3036_PD_SYS] = DOMAIN_RK3036(8, 22, 29, false),
+};
+
static const struct rockchip_domain_info rk3288_pm_domains[] = {
[RK3288_PD_VIO] = DOMAIN_RK3288(7, 7, 4, false),
[RK3288_PD_HEVC] = DOMAIN_RK3288(14, 10, 9, false),
@@ -768,6 +787,15 @@ static int rockchip_pm_domain_probe(struct platform_device *pdev)
[RK3399_PD_SDIOAUDIO] = DOMAIN_RK3399(31, 31, 29, true),
};
+static const struct rockchip_pmu_info rk3036_pmu = {
+ .req_offset = 0x148,
+ .idle_offset = 0x14c,
+ .ack_offset = 0x14c,
+
+ .num_domains = ARRAY_SIZE(rk3036_pm_domains),
+ .domain_info = rk3036_pm_domains,
+};
+
static const struct rockchip_pmu_info rk3288_pmu = {
.pwr_offset = 0x08,
.status_offset = 0x0c,
@@ -843,6 +871,10 @@ static int rockchip_pm_domain_probe(struct platform_device *pdev)
static const struct of_device_id rockchip_pm_domain_dt_match[] = {
{
+ .compatible = "rockchip,rk3036-power-controller",
+ .data = (void *)&rk3036_pmu,
+ },
+ {
.compatible = "rockchip,rk3288-power-controller",
.data = (void *)&rk3288_pmu,
},
--
1.9.1
^ permalink raw reply related
* [PATCH v1 04/13] soc: rockchip: power-domain: Fix wrong value when power up pd
From: Elaine Zhang @ 2018-05-11 3:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526009458-28579-1-git-send-email-zhangqing@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
---
drivers/soc/rockchip/pm_domains.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/rockchip/pm_domains.c b/drivers/soc/rockchip/pm_domains.c
index ebd7c41898c0..01d4ba26a054 100644
--- a/drivers/soc/rockchip/pm_domains.c
+++ b/drivers/soc/rockchip/pm_domains.c
@@ -264,7 +264,7 @@ static void rockchip_do_pmu_set_power_domain(struct rockchip_pm_domain *pd,
return;
else if (pd->info->pwr_w_mask)
regmap_write(pmu->regmap, pmu->info->pwr_offset,
- on ? pd->info->pwr_mask :
+ on ? pd->info->pwr_w_mask :
(pd->info->pwr_mask | pd->info->pwr_w_mask));
else
regmap_update_bits(pmu->regmap, pmu->info->pwr_offset,
--
1.9.1
^ permalink raw reply related
* [PATCH v1 05/13] dt-bindings: power: add RK3128 SoCs header for power-domain
From: Elaine Zhang @ 2018-05-11 3:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526009458-28579-1-git-send-email-zhangqing@rock-chips.com>
According to a description from TRM, add all the power domains.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
include/dt-bindings/power/rk3128-power.h | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 include/dt-bindings/power/rk3128-power.h
diff --git a/include/dt-bindings/power/rk3128-power.h b/include/dt-bindings/power/rk3128-power.h
new file mode 100644
index 000000000000..26aef519cd94
--- /dev/null
+++ b/include/dt-bindings/power/rk3128-power.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co. Ltd.
+ * Author: Elaine Zhang <zhangqing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_POWER_RK3128_POWER_H__
+#define __DT_BINDINGS_POWER_RK3128_POWER_H__
+
+/* VD_CORE */
+#define RK3128_PD_CORE 0
+
+/* VD_LOGIC */
+#define RK3128_PD_VIO 1
+#define RK3128_PD_VIDEO 2
+#define RK3128_PD_GPU 3
+#define RK3128_PD_MSCH 4
+
+#endif
--
1.9.1
^ permalink raw reply related
* [PATCH v1 06/13] dt-bindings: add binding for rk3128 power domains
From: Elaine Zhang @ 2018-05-11 3:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526009458-28579-1-git-send-email-zhangqing@rock-chips.com>
Add binding documentation for the power domains
found on Rockchip RK3128 SoCs.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
Documentation/devicetree/bindings/soc/rockchip/power_domain.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
index 79924ee9ae86..9a3f5fd36a80 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
@@ -6,6 +6,7 @@ powered up/down by software based on different application scenes to save power.
Required properties for power domain controller:
- compatible: Should be one of the following.
"rockchip,rk3036-power-controller" - for RK3036 SoCs.
+ "rockchip,rk3128-power-controller" - for RK3128 SoCs.
"rockchip,rk3288-power-controller" - for RK3288 SoCs.
"rockchip,rk3328-power-controller" - for RK3328 SoCs.
"rockchip,rk3366-power-controller" - for RK3366 SoCs.
@@ -19,6 +20,7 @@ Required properties for power domain controller:
Required properties for power domain sub nodes:
- reg: index of the power domain, should use macros in:
"include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
+ "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
"include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
@@ -96,6 +98,7 @@ containing a phandle to the power device node and an index specifying which
power domain to use.
The index should use macros in:
"include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
+ "include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
"include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
--
1.9.1
^ permalink raw reply related
* [PATCH v1 07/13] soc: rockchip: power-domain: add power domain support for rk3128
From: Elaine Zhang @ 2018-05-11 3:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526009458-28579-1-git-send-email-zhangqing@rock-chips.com>
This driver is modified to support RK3128 SoC.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
drivers/soc/rockchip/pm_domains.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/soc/rockchip/pm_domains.c b/drivers/soc/rockchip/pm_domains.c
index 01d4ba26a054..99a2dd8a7801 100644
--- a/drivers/soc/rockchip/pm_domains.c
+++ b/drivers/soc/rockchip/pm_domains.c
@@ -19,6 +19,7 @@
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <dt-bindings/power/rk3036-power.h>
+#include <dt-bindings/power/rk3128-power.h>
#include <dt-bindings/power/rk3288-power.h>
#include <dt-bindings/power/rk3328-power.h>
#include <dt-bindings/power/rk3366-power.h>
@@ -720,6 +721,14 @@ static int rockchip_pm_domain_probe(struct platform_device *pdev)
[RK3036_PD_SYS] = DOMAIN_RK3036(8, 22, 29, false),
};
+static const struct rockchip_domain_info rk3128_pm_domains[] = {
+ [RK3128_PD_CORE] = DOMAIN_RK3288(0, 0, 4, false),
+ [RK3128_PD_MSCH] = DOMAIN_RK3288(-1, -1, 6, true),
+ [RK3128_PD_VIO] = DOMAIN_RK3288(3, 3, 2, false),
+ [RK3128_PD_VIDEO] = DOMAIN_RK3288(2, 2, 1, false),
+ [RK3128_PD_GPU] = DOMAIN_RK3288(1, 1, 3, false),
+};
+
static const struct rockchip_domain_info rk3288_pm_domains[] = {
[RK3288_PD_VIO] = DOMAIN_RK3288(7, 7, 4, false),
[RK3288_PD_HEVC] = DOMAIN_RK3288(14, 10, 9, false),
@@ -796,6 +805,17 @@ static int rockchip_pm_domain_probe(struct platform_device *pdev)
.domain_info = rk3036_pm_domains,
};
+static const struct rockchip_pmu_info rk3128_pmu = {
+ .pwr_offset = 0x04,
+ .status_offset = 0x08,
+ .req_offset = 0x0c,
+ .idle_offset = 0x10,
+ .ack_offset = 0x10,
+
+ .num_domains = ARRAY_SIZE(rk3128_pm_domains),
+ .domain_info = rk3128_pm_domains,
+};
+
static const struct rockchip_pmu_info rk3288_pmu = {
.pwr_offset = 0x08,
.status_offset = 0x0c,
@@ -875,6 +895,10 @@ static int rockchip_pm_domain_probe(struct platform_device *pdev)
.data = (void *)&rk3036_pmu,
},
{
+ .compatible = "rockchip,rk3128-power-controller",
+ .data = (void *)&rk3128_pmu,
+ },
+ {
.compatible = "rockchip,rk3288-power-controller",
.data = (void *)&rk3288_pmu,
},
--
1.9.1
^ permalink raw reply related
* [PATCH v1 08/13] dt-bindings: power: add RK3228 SoCs header for power-domain
From: Elaine Zhang @ 2018-05-11 3:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526009458-28579-1-git-send-email-zhangqing@rock-chips.com>
According to a description from TRM, add all the power domains.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
include/dt-bindings/power/rk3228-power.h | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 include/dt-bindings/power/rk3228-power.h
diff --git a/include/dt-bindings/power/rk3228-power.h b/include/dt-bindings/power/rk3228-power.h
new file mode 100644
index 000000000000..fa1264d5a995
--- /dev/null
+++ b/include/dt-bindings/power/rk3228-power.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#ifndef __DT_BINDINGS_POWER_RK3228_POWER_H__
+#define __DT_BINDINGS_POWER_RK3228_POWER_H__
+
+/**
+ * RK3228 idle id Summary.
+ */
+
+#define RK3228_PD_CORE 0
+#define RK3228_PD_MSCH 1
+#define RK3228_PD_BUS 2
+#define RK3228_PD_SYS 3
+#define RK3228_PD_VIO 4
+#define RK3228_PD_VOP 5
+#define RK3228_PD_VPU 6
+#define RK3228_PD_RKVDEC 7
+#define RK3228_PD_GPU 8
+#define RK3228_PD_PERI 9
+#define RK3228_PD_GMAC 10
+
+#endif
--
1.9.1
^ permalink raw reply related
* [PATCH v1 09/13] dt-bindings: add binding for rk3228 power domains
From: Elaine Zhang @ 2018-05-11 3:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526009458-28579-1-git-send-email-zhangqing@rock-chips.com>
Add binding documentation for the power domains
found on Rockchip RK3228 SoCs.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
Documentation/devicetree/bindings/soc/rockchip/power_domain.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
index 9a3f5fd36a80..affe36dcfa17 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
@@ -7,6 +7,7 @@ Required properties for power domain controller:
- compatible: Should be one of the following.
"rockchip,rk3036-power-controller" - for RK3036 SoCs.
"rockchip,rk3128-power-controller" - for RK3128 SoCs.
+ "rockchip,rk3228-power-controller" - for RK3228 SoCs.
"rockchip,rk3288-power-controller" - for RK3288 SoCs.
"rockchip,rk3328-power-controller" - for RK3328 SoCs.
"rockchip,rk3366-power-controller" - for RK3366 SoCs.
@@ -21,6 +22,7 @@ Required properties for power domain sub nodes:
- reg: index of the power domain, should use macros in:
"include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
"include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
+ "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
"include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
@@ -99,6 +101,7 @@ power domain to use.
The index should use macros in:
"include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
"include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
+ "include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
"include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
--
1.9.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox