* [PATCH ARM32 v4.4 V2 45/47] ARM: spectre-v2: per-CPU vtables to work around big.Little systems
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit 383fb3ee8024d596f488d2dbaf45e572897acbdb upstream.
In big.Little systems, some CPUs require the Spectre workarounds in
paths such as the context switch, but other CPUs do not. In order
to handle these differences, we need per-CPU vtables.
We are unable to use the kernel's per-CPU variables to support this
as per-CPU is not initialised at times when we need access to the
vtables, so we have to use an array indexed by logical CPU number.
We use an array-of-pointers to avoid having function pointers in
the kernel's read/write .data section.
Note: Added include of linux/slab.h in arch/arm/smp.c.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/proc-fns.h | 23 +++++++++++++++++++++++
arch/arm/kernel/setup.c | 5 +++++
arch/arm/kernel/smp.c | 32 ++++++++++++++++++++++++++++++++
arch/arm/mm/proc-v7-bugs.c | 17 ++---------------
4 files changed, 62 insertions(+), 15 deletions(-)
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index a1a71b068edc..1bfcc3bcfc6d 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -104,12 +104,35 @@ extern void cpu_do_resume(void *);
#else
extern struct processor processor;
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+#include <linux/smp.h>
+/*
+ * This can't be a per-cpu variable because we need to access it before
+ * per-cpu has been initialised. We have a couple of functions that are
+ * called in a pre-emptible context, and so can't use smp_processor_id()
+ * there, hence PROC_TABLE(). We insist in init_proc_vtable() that the
+ * function pointers for these are identical across all CPUs.
+ */
+extern struct processor *cpu_vtable[];
+#define PROC_VTABLE(f) cpu_vtable[smp_processor_id()]->f
+#define PROC_TABLE(f) cpu_vtable[0]->f
+static inline void init_proc_vtable(const struct processor *p)
+{
+ unsigned int cpu = smp_processor_id();
+ *cpu_vtable[cpu] = *p;
+ WARN_ON_ONCE(cpu_vtable[cpu]->dcache_clean_area !=
+ cpu_vtable[0]->dcache_clean_area);
+ WARN_ON_ONCE(cpu_vtable[cpu]->set_pte_ext !=
+ cpu_vtable[0]->set_pte_ext);
+}
+#else
#define PROC_VTABLE(f) processor.f
#define PROC_TABLE(f) processor.f
static inline void init_proc_vtable(const struct processor *p)
{
processor = *p;
}
+#endif
#define cpu_proc_init PROC_VTABLE(_proc_init)
#define cpu_check_bugs PROC_VTABLE(check_bugs)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 8081f88bf636..f2833d7c5378 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -113,6 +113,11 @@ EXPORT_SYMBOL(elf_hwcap2);
#ifdef MULTI_CPU
struct processor processor __ro_after_init;
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+struct processor *cpu_vtable[NR_CPUS] = {
+ [0] = &processor,
+};
+#endif
#endif
#ifdef MULTI_TLB
struct cpu_tlb_fns cpu_tlb __ro_after_init;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index c92abf791aed..03c11e021962 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -27,6 +27,7 @@
#include <linux/completion.h>
#include <linux/cpufreq.h>
#include <linux/irq_work.h>
+#include <linux/slab.h>
#include <linux/atomic.h>
#include <asm/bugs.h>
@@ -40,6 +41,7 @@
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
+#include <asm/procinfo.h>
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/tlbflush.h>
@@ -96,6 +98,30 @@ static unsigned long get_arch_pgd(pgd_t *pgd)
#endif
}
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+static int secondary_biglittle_prepare(unsigned int cpu)
+{
+ if (!cpu_vtable[cpu])
+ cpu_vtable[cpu] = kzalloc(sizeof(*cpu_vtable[cpu]), GFP_KERNEL);
+
+ return cpu_vtable[cpu] ? 0 : -ENOMEM;
+}
+
+static void secondary_biglittle_init(void)
+{
+ init_proc_vtable(lookup_processor(read_cpuid_id())->proc);
+}
+#else
+static int secondary_biglittle_prepare(unsigned int cpu)
+{
+ return 0;
+}
+
+static void secondary_biglittle_init(void)
+{
+}
+#endif
+
int __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
@@ -103,6 +129,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
if (!smp_ops.smp_boot_secondary)
return -ENOSYS;
+ ret = secondary_biglittle_prepare(cpu);
+ if (ret)
+ return ret;
+
/*
* We need to tell the secondary core where to find
* its stack and the page tables.
@@ -354,6 +384,8 @@ asmlinkage void secondary_start_kernel(void)
struct mm_struct *mm = &init_mm;
unsigned int cpu;
+ secondary_biglittle_init();
+
/*
* The identity mapping is uncached (strongly ordered), so
* switch away from it before attempting any exclusive accesses.
diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c
index 5544b82a2e7a..9a07916af8dd 100644
--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -52,8 +52,6 @@ static void cpu_v7_spectre_init(void)
case ARM_CPU_PART_CORTEX_A17:
case ARM_CPU_PART_CORTEX_A73:
case ARM_CPU_PART_CORTEX_A75:
- if (processor.switch_mm != cpu_v7_bpiall_switch_mm)
- goto bl_error;
per_cpu(harden_branch_predictor_fn, cpu) =
harden_branch_predictor_bpiall;
spectre_v2_method = "BPIALL";
@@ -61,8 +59,6 @@ static void cpu_v7_spectre_init(void)
case ARM_CPU_PART_CORTEX_A15:
case ARM_CPU_PART_BRAHMA_B15:
- if (processor.switch_mm != cpu_v7_iciallu_switch_mm)
- goto bl_error;
per_cpu(harden_branch_predictor_fn, cpu) =
harden_branch_predictor_iciallu;
spectre_v2_method = "ICIALLU";
@@ -88,11 +84,9 @@ static void cpu_v7_spectre_init(void)
ARM_SMCCC_ARCH_WORKAROUND_1, &res);
if ((int)res.a0 != 0)
break;
- if (processor.switch_mm != cpu_v7_hvc_switch_mm && cpu)
- goto bl_error;
per_cpu(harden_branch_predictor_fn, cpu) =
call_hvc_arch_workaround_1;
- processor.switch_mm = cpu_v7_hvc_switch_mm;
+ cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
spectre_v2_method = "hypervisor";
break;
@@ -101,11 +95,9 @@ static void cpu_v7_spectre_init(void)
ARM_SMCCC_ARCH_WORKAROUND_1, &res);
if ((int)res.a0 != 0)
break;
- if (processor.switch_mm != cpu_v7_smc_switch_mm && cpu)
- goto bl_error;
per_cpu(harden_branch_predictor_fn, cpu) =
call_smc_arch_workaround_1;
- processor.switch_mm = cpu_v7_smc_switch_mm;
+ cpu_do_switch_mm = cpu_v7_smc_switch_mm;
spectre_v2_method = "firmware";
break;
@@ -119,11 +111,6 @@ static void cpu_v7_spectre_init(void)
if (spectre_v2_method)
pr_info("CPU%u: Spectre v2: using %s workaround\n",
smp_processor_id(), spectre_v2_method);
- return;
-
-bl_error:
- pr_err("CPU%u: Spectre v2: incorrect context switching function, system vulnerable\n",
- cpu);
}
#else
static void cpu_v7_spectre_init(void)
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 46/47] ARM: ensure that processor vtables is not lost after boot
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit 3a4d0c2172bcf15b7a3d9d498b2b355f9864286b upstream.
Marek Szyprowski reported problems with CPU hotplug in current kernels.
This was tracked down to the processor vtables being located in an
init section, and therefore discarded after kernel boot, despite being
required after boot to properly initialise the non-boot CPUs.
Arrange for these tables to end up in .rodata when required.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 383fb3ee8024 ("ARM: spectre-v2: per-CPU vtables to work around big.Little systems")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/mm/proc-macros.S | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 212147c78f4b..d36a283b4099 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -259,6 +259,13 @@
.endm
.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0, bugs=0
+/*
+ * If we are building for big.Little with branch predictor hardening,
+ * we need the processor function tables to remain available after boot.
+ */
+#if 1 // defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+ .section ".rodata"
+#endif
.type \name\()_processor_functions, #object
.align 2
ENTRY(\name\()_processor_functions)
@@ -294,6 +301,9 @@ ENTRY(\name\()_processor_functions)
.endif
.size \name\()_processor_functions, . - \name\()_processor_functions
+#if 1 // defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+ .previous
+#endif
.endm
.macro define_cache_functions name:req
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 44/47] ARM: 8595/2: apply more __ro_after_init
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Kees Cook <keescook@chromium.org>
Commit 7619751f8c900fa5fdd76db06f4caf095c56de8e upstream.
Guided by grsecurity's analogous __read_only markings in arch/arm,
this applies several uses of __ro_after_init to structures that are
only updated during __init.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/kernel/cpuidle.c | 2 +-
arch/arm/kernel/setup.c | 10 +++++-----
arch/arm/kernel/smp.c | 2 +-
arch/arm/lib/delay.c | 2 +-
arch/arm/mm/mmu.c | 2 +-
5 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
index 318da33465f4..68be7d89141d 100644
--- a/arch/arm/kernel/cpuidle.c
+++ b/arch/arm/kernel/cpuidle.c
@@ -19,7 +19,7 @@ extern struct of_cpuidle_method __cpuidle_method_of_table[];
static const struct of_cpuidle_method __cpuidle_method_of_table_sentinel
__used __section(__cpuidle_method_of_table_end);
-static struct cpuidle_ops cpuidle_ops[NR_CPUS];
+static struct cpuidle_ops cpuidle_ops[NR_CPUS] __ro_after_init;
/**
* arm_cpuidle_simple_enter() - a wrapper to cpu_do_idle()
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 13bda9574e18..8081f88bf636 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -112,19 +112,19 @@ EXPORT_SYMBOL(elf_hwcap2);
#ifdef MULTI_CPU
-struct processor processor __read_mostly;
+struct processor processor __ro_after_init;
#endif
#ifdef MULTI_TLB
-struct cpu_tlb_fns cpu_tlb __read_mostly;
+struct cpu_tlb_fns cpu_tlb __ro_after_init;
#endif
#ifdef MULTI_USER
-struct cpu_user_fns cpu_user __read_mostly;
+struct cpu_user_fns cpu_user __ro_after_init;
#endif
#ifdef MULTI_CACHE
-struct cpu_cache_fns cpu_cache __read_mostly;
+struct cpu_cache_fns cpu_cache __ro_after_init;
#endif
#ifdef CONFIG_OUTER_CACHE
-struct outer_cache_fns outer_cache __read_mostly;
+struct outer_cache_fns outer_cache __ro_after_init;
EXPORT_SYMBOL(outer_cache);
#endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index bafbd29c6e64..c92abf791aed 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -79,7 +79,7 @@ enum ipi_msg_type {
static DECLARE_COMPLETION(cpu_running);
-static struct smp_operations smp_ops;
+static struct smp_operations smp_ops __ro_after_init;
void __init smp_set_ops(const struct smp_operations *ops)
{
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 8044591dca72..2cef11884857 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -29,7 +29,7 @@
/*
* Default to the loop-based delay implementation.
*/
-struct arm_delay_ops arm_delay_ops = {
+struct arm_delay_ops arm_delay_ops __ro_after_init = {
.delay = __loop_delay,
.const_udelay = __loop_const_udelay,
.udelay = __loop_udelay,
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index aead23f15213..36f8c033714f 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -243,7 +243,7 @@ __setup("noalign", noalign_setup);
#define PROT_PTE_S2_DEVICE PROT_PTE_DEVICE
#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE
-static struct mem_type mem_types[] = {
+static struct mem_type mem_types[] __ro_after_init = {
[MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
L_PTE_SHARED,
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 43/47] arch: Introduce post-init read-only memory
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Kees Cook <keescook@chromium.org>
Commit c74ba8b3480da6ddaea17df2263ec09b869ac496 upstream.
One of the easiest ways to protect the kernel from attack is to reduce
the internal attack surface exposed when a "write" flaw is available. By
making as much of the kernel read-only as possible, we reduce the
attack surface.
Many things are written to only during __init, and never changed
again. These cannot be made "const" since the compiler will do the wrong
thing (we do actually need to write to them). Instead, move these items
into a memory region that will be made read-only during mark_rodata_ro()
which happens after all kernel __init code has finished.
This introduces __ro_after_init as a way to mark such memory, and adds
some documentation about the existing __read_mostly marking.
This improves the security of the Linux kernel by marking formerly
read-write memory regions as read-only on a fully booted up system.
Based on work by PaX Team and Brad Spengler.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455748879-21872-5-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/parisc/include/asm/cache.h | 3 +++
include/asm-generic/vmlinux.lds.h | 1 +
include/linux/cache.h | 14 ++++++++++++++
3 files changed, 18 insertions(+)
diff --git a/arch/parisc/include/asm/cache.h b/arch/parisc/include/asm/cache.h
index 3d0e17bcc8e9..df0f52bd18b4 100644
--- a/arch/parisc/include/asm/cache.h
+++ b/arch/parisc/include/asm/cache.h
@@ -22,6 +22,9 @@
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
+/* Read-only memory is marked before mark_rodata_ro() is called. */
+#define __ro_after_init __read_mostly
+
void parisc_cache_init(void); /* initializes cache-flushing */
void disable_sr_hashing_asm(int); /* low level support for above */
void disable_sr_hashing(void); /* turns off space register hashing */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index a461b6604fd9..c63f92150eda 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -256,6 +256,7 @@
.rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_rodata) = .; \
*(.rodata) *(.rodata.*) \
+ *(.data..ro_after_init) /* Read only after init */ \
*(__vermagic) /* Kernel version magic */ \
. = ALIGN(8); \
VMLINUX_SYMBOL(__start___tracepoints_ptrs) = .; \
diff --git a/include/linux/cache.h b/include/linux/cache.h
index 17e7e82d2aa7..1be04f8c563a 100644
--- a/include/linux/cache.h
+++ b/include/linux/cache.h
@@ -12,10 +12,24 @@
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#endif
+/*
+ * __read_mostly is used to keep rarely changing variables out of frequently
+ * updated cachelines. If an architecture doesn't support it, ignore the
+ * hint.
+ */
#ifndef __read_mostly
#define __read_mostly
#endif
+/*
+ * __ro_after_init is used to mark things that are read-only after init (i.e.
+ * after mark_rodata_ro() has been called). These are effectively read-only,
+ * but may get written to during init, so can't live in .rodata (via "const").
+ */
+#ifndef __ro_after_init
+#define __ro_after_init __attribute__((__section__(".data..ro_after_init")))
+#endif
+
#ifndef ____cacheline_aligned
#define ____cacheline_aligned __attribute__((__aligned__(SMP_CACHE_BYTES)))
#endif
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 42/47] ARM: add PROC_VTABLE and PROC_TABLE macros
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit e209950fdd065d2cc46e6338e47e52841b830cba upstream.
Allow the way we access members of the processor vtable to be changed
at compile time. We will need to move to per-CPU vtables to fix the
Spectre variant 2 issues on big.Little systems.
However, we have a couple of calls that do not need the vtable
treatment, and indeed cause a kernel warning due to the (later) use
of smp_processor_id(), so also introduce the PROC_TABLE macro for
these which always use CPU 0's function pointers.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/proc-fns.h | 39 ++++++++++++++++++++++-----------
arch/arm/kernel/setup.c | 4 +---
2 files changed, 27 insertions(+), 16 deletions(-)
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 19939e88efca..a1a71b068edc 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -23,7 +23,7 @@ struct mm_struct;
/*
* Don't change this structure - ASM code relies on it.
*/
-extern struct processor {
+struct processor {
/* MISC
* get data abort address/flags
*/
@@ -79,9 +79,13 @@ extern struct processor {
unsigned int suspend_size;
void (*do_suspend)(void *);
void (*do_resume)(void *);
-} processor;
+};
#ifndef MULTI_CPU
+static inline void init_proc_vtable(const struct processor *p)
+{
+}
+
extern void cpu_proc_init(void);
extern void cpu_proc_fin(void);
extern int cpu_do_idle(void);
@@ -98,18 +102,27 @@ extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
extern void cpu_do_suspend(void *);
extern void cpu_do_resume(void *);
#else
-#define cpu_proc_init processor._proc_init
-#define cpu_check_bugs processor.check_bugs
-#define cpu_proc_fin processor._proc_fin
-#define cpu_reset processor.reset
-#define cpu_do_idle processor._do_idle
-#define cpu_dcache_clean_area processor.dcache_clean_area
-#define cpu_set_pte_ext processor.set_pte_ext
-#define cpu_do_switch_mm processor.switch_mm
-/* These three are private to arch/arm/kernel/suspend.c */
-#define cpu_do_suspend processor.do_suspend
-#define cpu_do_resume processor.do_resume
+extern struct processor processor;
+#define PROC_VTABLE(f) processor.f
+#define PROC_TABLE(f) processor.f
+static inline void init_proc_vtable(const struct processor *p)
+{
+ processor = *p;
+}
+
+#define cpu_proc_init PROC_VTABLE(_proc_init)
+#define cpu_check_bugs PROC_VTABLE(check_bugs)
+#define cpu_proc_fin PROC_VTABLE(_proc_fin)
+#define cpu_reset PROC_VTABLE(reset)
+#define cpu_do_idle PROC_VTABLE(_do_idle)
+#define cpu_dcache_clean_area PROC_TABLE(dcache_clean_area)
+#define cpu_set_pte_ext PROC_TABLE(set_pte_ext)
+#define cpu_do_switch_mm PROC_VTABLE(switch_mm)
+
+/* These two are private to arch/arm/kernel/suspend.c */
+#define cpu_do_suspend PROC_VTABLE(do_suspend)
+#define cpu_do_resume PROC_VTABLE(do_resume)
#endif
extern void cpu_resume(void);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 5aa9c08de410..13bda9574e18 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -625,9 +625,7 @@ static void __init setup_processor(void)
cpu_name = list->cpu_name;
__cpu_architecture = __get_cpu_architecture();
-#ifdef MULTI_CPU
- processor = *list->proc;
-#endif
+ init_proc_vtable(list->proc);
#ifdef MULTI_TLB
cpu_tlb = *list->tlb;
#endif
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 41/47] ARM: clean up per-processor check_bugs method call
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit 945aceb1db8885d3a35790cf2e810f681db52756 upstream.
Call the per-processor type check_bugs() method in the same way as we
do other per-processor functions - move the "processor." detail into
proc-fns.h.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/proc-fns.h | 1 +
arch/arm/kernel/bugs.c | 4 ++--
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index f379f5f849a9..19939e88efca 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -99,6 +99,7 @@ extern void cpu_do_suspend(void *);
extern void cpu_do_resume(void *);
#else
#define cpu_proc_init processor._proc_init
+#define cpu_check_bugs processor.check_bugs
#define cpu_proc_fin processor._proc_fin
#define cpu_reset processor.reset
#define cpu_do_idle processor._do_idle
diff --git a/arch/arm/kernel/bugs.c b/arch/arm/kernel/bugs.c
index 7be511310191..d41d3598e5e5 100644
--- a/arch/arm/kernel/bugs.c
+++ b/arch/arm/kernel/bugs.c
@@ -6,8 +6,8 @@
void check_other_bugs(void)
{
#ifdef MULTI_CPU
- if (processor.check_bugs)
- processor.check_bugs();
+ if (cpu_check_bugs)
+ cpu_check_bugs();
#endif
}
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 40/47] ARM: split out processor lookup
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit 65987a8553061515b5851b472081aedb9837a391 upstream.
Split out the lookup of the processor type and associated error handling
from the rest of setup_processor() - we will need to use this in the
secondary CPU bringup path for big.Little Spectre variant 2 mitigation.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/cputype.h | 1 +
arch/arm/kernel/setup.c | 31 +++++++++++++++++++------------
2 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 76bb3bd060d1..53125dad6edd 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -93,6 +93,7 @@
#define ARM_CPU_PART_SCORPION 0x510002d0
extern unsigned int processor_id;
+struct proc_info_list *lookup_processor(u32 midr);
#ifdef CONFIG_CPU_CP15
#define read_cpuid(reg) \
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 20edd349d379..5aa9c08de410 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -599,22 +599,29 @@ static void __init smp_build_mpidr_hash(void)
}
#endif
-static void __init setup_processor(void)
+/*
+ * locate processor in the list of supported processor types. The linker
+ * builds this table for us from the entries in arch/arm/mm/proc-*.S
+ */
+struct proc_info_list *lookup_processor(u32 midr)
{
- struct proc_info_list *list;
+ struct proc_info_list *list = lookup_processor_type(midr);
- /*
- * locate processor in the list of supported processor
- * types. The linker builds this table for us from the
- * entries in arch/arm/mm/proc-*.S
- */
- list = lookup_processor_type(read_cpuid_id());
if (!list) {
- pr_err("CPU configuration botched (ID %08x), unable to continue.\n",
- read_cpuid_id());
- while (1);
+ pr_err("CPU%u: configuration botched (ID %08x), CPU halted\n",
+ smp_processor_id(), midr);
+ while (1)
+ /* can't use cpu_relax() here as it may require MMU setup */;
}
+ return list;
+}
+
+static void __init setup_processor(void)
+{
+ unsigned int midr = read_cpuid_id();
+ struct proc_info_list *list = lookup_processor(midr);
+
cpu_name = list->cpu_name;
__cpu_architecture = __get_cpu_architecture();
@@ -632,7 +639,7 @@ static void __init setup_processor(void)
#endif
pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
- cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
+ list->cpu_name, midr, midr & 15,
proc_arch[cpu_architecture()], get_cr());
snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 39/47] ARM: make lookup_processor_type() non-__init
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit 899a42f836678a595f7d2bc36a5a0c2b03d08cbc upstream.
Move lookup_processor_type() out of the __init section so it is callable
from (eg) the secondary startup code during hotplug.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/kernel/head-common.S | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 8733012d231f..7e662bdd5cb3 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -122,6 +122,9 @@ ENDPROC(__mmap_switched)
.long init_thread_union + THREAD_START_SP @ sp
.size __mmap_switched_data, . - __mmap_switched_data
+ __FINIT
+ .text
+
/*
* This provides a C-API version of __lookup_processor_type
*/
@@ -133,9 +136,6 @@ ENTRY(lookup_processor_type)
ldmfd sp!, {r4 - r6, r9, pc}
ENDPROC(lookup_processor_type)
- __FINIT
- .text
-
/*
* Read processor ID register (CP#15, CR0), and look up in the linker-built
* supported processor list. Note that we can't use the absolute addresses
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 38/47] ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Julien Thierry <julien.thierry@arm.com>
Commit 5df7a99bdd0de4a0480320264c44c04543c29d5a upstream.
In vfp_preserve_user_clear_hwstate, ufp_exc->fpinst2 gets assigned to
itself. It should actually be hwstate->fpinst2 that gets assigned to the
ufp_exc field.
Fixes commit 3aa2df6ec2ca6bc143a65351cca4266d03a8bc41 ("ARM: 8791/1:
vfp: use __copy_to_user() when saving VFP state").
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/vfp/vfpmodule.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f07567eedd82..f9392fb060ea 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -583,7 +583,7 @@ int vfp_preserve_user_clear_hwstate(struct user_vfp *ufp,
*/
ufp_exc->fpexc = hwstate->fpexc;
ufp_exc->fpinst = hwstate->fpinst;
- ufp_exc->fpinst2 = ufp_exc->fpinst2;
+ ufp_exc->fpinst2 = hwstate->fpinst2;
/* Ensure that VFP is disabled. */
vfp_flush_hwstate(thread);
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 37/47] ARM: 8809/1: proc-v7: fix Thumb annotation of cpu_v7_hvc_switch_mm
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 6282e916f774e37845c65d1eae9f8c649004f033 upstream.
Due to what appears to be a copy/paste error, the opening ENTRY()
of cpu_v7_hvc_switch_mm() lacks a matching ENDPROC(), and instead,
the one for cpu_v7_smc_switch_mm() is duplicated.
Given that it is ENDPROC() that emits the Thumb annotation, the
cpu_v7_hvc_switch_mm() routine will be called in ARM mode on a
Thumb2 kernel, resulting in the following splat:
Internal error: Oops - undefined instruction: 0 [#1] SMP THUMB2
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc1-00030-g4d28ad89189d-dirty #488
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
PC is at cpu_v7_hvc_switch_mm+0x12/0x18
LR is at flush_old_exec+0x31b/0x570
pc : [<c0316efe>] lr : [<c04117c7>] psr: 00000013
sp : ee899e50 ip : 00000000 fp : 00000001
r10: eda28f34 r9 : eda31800 r8 : c12470e0
r7 : eda1fc00 r6 : eda53000 r5 : 00000000 r4 : ee88c000
r3 : c0316eec r2 : 00000001 r1 : eda53000 r0 : 6da6c000
Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Note the 'ISA ARM' in the last line.
Fix this by using the correct name in ENDPROC().
Cc: <stable@vger.kernel.org>
Fixes: 10115105cb3a ("ARM: spectre-v2: add firmware based hardening")
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/mm/proc-v7.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index b6359ce39fa7..90cddff176f6 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -106,7 +106,7 @@ ENTRY(cpu_v7_hvc_switch_mm)
hvc #0
ldmfd sp!, {r0 - r3}
b cpu_v7_switch_mm
-ENDPROC(cpu_v7_smc_switch_mm)
+ENDPROC(cpu_v7_hvc_switch_mm)
#endif
ENTRY(cpu_v7_iciallu_switch_mm)
mov r3, #0
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 36/47] ARM: 8797/1: spectre-v1.1: harden __copy_to_user
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Julien Thierry <julien.thierry@arm.com>
Commit a1d09e074250fad24f1b993f327b18cc6812eb7a upstream.
Sanitize user pointer given to __copy_to_user, both for standard version
and memcopy version of the user accessor.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/lib/copy_to_user.S | 6 +++++-
arch/arm/lib/uaccess_with_memcpy.c | 3 ++-
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index caf5019d8161..970abe521197 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -94,6 +94,11 @@
ENTRY(__copy_to_user_std)
WEAK(arm_copy_to_user)
+#ifdef CONFIG_CPU_SPECTRE
+ get_thread_info r3
+ ldr r3, [r3, #TI_ADDR_LIMIT]
+ uaccess_mask_range_ptr r0, r2, r3, ip
+#endif
#include "copy_template.S"
@@ -108,4 +113,3 @@ ENDPROC(__copy_to_user_std)
rsb r0, r0, r2
copy_abort_end
.popsection
-
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 588bbc288396..0b4fe892d00b 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -153,7 +153,8 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n)
n = __copy_to_user_std(to, from, n);
uaccess_restore(ua_flags);
} else {
- n = __copy_to_user_memcpy(to, from, n);
+ n = __copy_to_user_memcpy(uaccess_mask_range_ptr(to, n),
+ from, n);
}
return n;
}
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 35/47] ARM: 8796/1: spectre-v1, v1.1: provide helpers for address sanitization
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Julien Thierry <julien.thierry@arm.com>
Commit afaf6838f4bc896a711180b702b388b8cfa638fc upstream.
Introduce C and asm helpers to sanitize user address, taking the
address range they target into account.
Use asm helper for existing sanitization in __copy_from_user().
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/assembler.h | 11 +++++++++++
arch/arm/include/asm/uaccess.h | 26 ++++++++++++++++++++++++++
arch/arm/lib/copy_from_user.S | 6 +-----
3 files changed, 38 insertions(+), 5 deletions(-)
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 483481c6937e..f2624fbd0336 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -461,6 +461,17 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
#endif
.endm
+ .macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req
+#ifdef CONFIG_CPU_SPECTRE
+ sub \tmp, \limit, #1
+ subs \tmp, \tmp, \addr @ tmp = limit - 1 - addr
+ addhs \tmp, \tmp, #1 @ if (tmp >= 0) {
+ subhss \tmp, \tmp, \size @ tmp = limit - (addr + size) }
+ movlo \addr, #0 @ if (tmp < 0) addr = NULL
+ csdb
+#endif
+ .endm
+
.macro uaccess_disable, tmp, isb=1
#ifdef CONFIG_CPU_SW_DOMAIN_PAN
/*
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 7f96a942d9a0..9a3b6de2edac 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -137,6 +137,32 @@ static inline void set_fs(mm_segment_t fs)
#define __inttype(x) \
__typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
+/*
+ * Sanitise a uaccess pointer such that it becomes NULL if addr+size
+ * is above the current addr_limit.
+ */
+#define uaccess_mask_range_ptr(ptr, size) \
+ ((__typeof__(ptr))__uaccess_mask_range_ptr(ptr, size))
+static inline void __user *__uaccess_mask_range_ptr(const void __user *ptr,
+ size_t size)
+{
+ void __user *safe_ptr = (void __user *)ptr;
+ unsigned long tmp;
+
+ asm volatile(
+ " sub %1, %3, #1\n"
+ " subs %1, %1, %0\n"
+ " addhs %1, %1, #1\n"
+ " subhss %1, %1, %2\n"
+ " movlo %0, #0\n"
+ : "+r" (safe_ptr), "=&r" (tmp)
+ : "r" (size), "r" (current_thread_info()->addr_limit)
+ : "cc");
+
+ csdb();
+ return safe_ptr;
+}
+
/*
* Single-value transfer routines. They automatically use the right
* size if we just have the right pointer type. Note that the functions
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index d36329cefedc..e32b51838439 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -93,11 +93,7 @@ ENTRY(arm_copy_from_user)
#ifdef CONFIG_CPU_SPECTRE
get_thread_info r3
ldr r3, [r3, #TI_ADDR_LIMIT]
- adds ip, r1, r2 @ ip=addr+size
- sub r3, r3, #1 @ addr_limit - 1
- cmpcc ip, r3 @ if (addr+size > addr_limit - 1)
- movcs r1, #0 @ addr = NULL
- csdb
+ uaccess_mask_range_ptr r1, r2, r3, ip
#endif
#include "copy_template.S"
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH v2 0/1] imx: Fix typo in iMQ8MQ reset names
From: Guido Günther @ 2019-08-01 8:20 UTC (permalink / raw)
To: Philipp Zabel, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, Rob Herring, Mark Rutland,
linux-arm-kernel, linux-kernel, devicetree
Some of the mipi dsi resets were called
IMX8MQ_RESET_MIPI_DIS_
instead of
IMX8MQ_RESET_MIPI_DSI_
Since they're DSI related this looks like a typo. This fixes the only in tree
user as well to not break bisecting.
Guido Günther (1):
dt-bindings: reset: Fix typo in imx8mq resets
drivers/reset/reset-imx7.c | 12 ++++++------
include/dt-bindings/reset/imx8mq-reset.h | 6 +++---
2 files changed, 9 insertions(+), 9 deletions(-)
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* [PATCH ARM32 v4.4 V2 34/47] ARM: 8795/1: spectre-v1.1: use put_user() for __put_user()
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Julien Thierry <julien.thierry@arm.com>
Commit e3aa6243434fd9a82e84bb79ab1abd14f2d9a5a7 upstream.
When Spectre mitigation is required, __put_user() needs to include
check_uaccess. This is already the case for put_user(), so just make
__put_user() an alias of put_user().
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/uaccess.h | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 94b1bf53b820..7f96a942d9a0 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -407,6 +407,14 @@ do { \
__pu_err; \
})
+#ifdef CONFIG_CPU_SPECTRE
+/*
+ * When mitigating Spectre variant 1.1, all accessors need to include
+ * verification of the address space.
+ */
+#define __put_user(x, ptr) put_user(x, ptr)
+
+#else
#define __put_user(x, ptr) \
({ \
long __pu_err = 0; \
@@ -414,12 +422,6 @@ do { \
__pu_err; \
})
-#define __put_user_error(x, ptr, err) \
-({ \
- __put_user_switch((x), (ptr), (err), __put_user_nocheck); \
- (void) 0; \
-})
-
#define __put_user_nocheck(x, __pu_ptr, __err, __size) \
do { \
unsigned long __pu_addr = (unsigned long)__pu_ptr; \
@@ -499,6 +501,7 @@ do { \
: "r" (x), "i" (-EFAULT) \
: "cc")
+#endif /* !CONFIG_CPU_SPECTRE */
#ifdef CONFIG_MMU
extern unsigned long __must_check
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH v2 1/1] dt-bindings: reset: Fix typo in imx8mq resets
From: Guido Günther @ 2019-08-01 8:20 UTC (permalink / raw)
To: Philipp Zabel, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, Rob Herring, Mark Rutland,
linux-arm-kernel, linux-kernel, devicetree
In-Reply-To: <cover.1564647612.git.agx@sigxcpu.org>
Some of the mipi dsi resets were called
IMX8MQ_RESET_MIPI_DIS__
instead of
IMX8MQ_RESET_MIPI_DSI__
Since they're DSI related this looks like a typo. This fixes the
only in tree user as well to not break bisecting.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
drivers/reset/reset-imx7.c | 12 ++++++------
include/dt-bindings/reset/imx8mq-reset.h | 6 +++---
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index 3ecd770f910b..1443a55a0c29 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -169,9 +169,9 @@ static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
[IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) },
[IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) },
[IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) },
- [IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
- [IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
- [IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
+ [IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
+ [IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
[IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR,
BIT(2) | BIT(1) },
[IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
@@ -220,9 +220,9 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev,
case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
- case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */
- case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */
- case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
value = assert ? 0 : bit;
diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h
index 57c592498aa0..bfa41b0e24f6 100644
--- a/include/dt-bindings/reset/imx8mq-reset.h
+++ b/include/dt-bindings/reset/imx8mq-reset.h
@@ -31,9 +31,9 @@
#define IMX8MQ_RESET_OTG2_PHY_RESET 20
#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21
#define IMX8MQ_RESET_MIPI_DSI_RESET_N 22
-#define IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N 23
-#define IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N 24
-#define IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N 25
+#define IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N 23
+#define IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N 24
+#define IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N 25
#define IMX8MQ_RESET_PCIEPHY 26
#define IMX8MQ_RESET_PCIEPHY_PERST 27
#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 33/47] ARM: uaccess: remove put_user() code duplication
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 9f73bd8bb445e0cbe4bcef6d4cfc788f1e184007 upstream.
Remove the code duplication between put_user() and __put_user(). The
code which selected the implementation based upon the pointer size, and
declared the local variable to hold the value to be put are common to
both implementations.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/uaccess.h | 106 +++++++++++++++------------------
1 file changed, 49 insertions(+), 57 deletions(-)
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index a782201a2629..94b1bf53b820 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -253,49 +253,23 @@ extern int __put_user_2(void *, unsigned int);
extern int __put_user_4(void *, unsigned int);
extern int __put_user_8(void *, unsigned long long);
-#define __put_user_x(__r2, __p, __e, __l, __s) \
- __asm__ __volatile__ ( \
- __asmeq("%0", "r0") __asmeq("%2", "r2") \
- __asmeq("%3", "r1") \
- "bl __put_user_" #__s \
- : "=&r" (__e) \
- : "0" (__p), "r" (__r2), "r" (__l) \
- : "ip", "lr", "cc")
-
-#define __put_user_check(x, p) \
+#define __put_user_check(__pu_val, __ptr, __err, __s) \
({ \
unsigned long __limit = current_thread_info()->addr_limit - 1; \
- const typeof(*(p)) __user *__tmp_p = (p); \
- register typeof(*(p)) __r2 asm("r2") = (x); \
- register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
+ register typeof(__pu_val) __r2 asm("r2") = __pu_val; \
+ register const void __user *__p asm("r0") = __ptr; \
register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
- unsigned int __ua_flags = uaccess_save_and_enable(); \
- switch (sizeof(*(__p))) { \
- case 1: \
- __put_user_x(__r2, __p, __e, __l, 1); \
- break; \
- case 2: \
- __put_user_x(__r2, __p, __e, __l, 2); \
- break; \
- case 4: \
- __put_user_x(__r2, __p, __e, __l, 4); \
- break; \
- case 8: \
- __put_user_x(__r2, __p, __e, __l, 8); \
- break; \
- default: __e = __put_user_bad(); break; \
- } \
- uaccess_restore(__ua_flags); \
- __e; \
+ __asm__ __volatile__ ( \
+ __asmeq("%0", "r0") __asmeq("%2", "r2") \
+ __asmeq("%3", "r1") \
+ "bl __put_user_" #__s \
+ : "=&r" (__e) \
+ : "0" (__p), "r" (__r2), "r" (__l) \
+ : "ip", "lr", "cc"); \
+ __err = __e; \
})
-#define put_user(x, p) \
- ({ \
- might_fault(); \
- __put_user_check(x, p); \
- })
-
#else /* CONFIG_MMU */
/*
@@ -313,7 +287,7 @@ static inline void set_fs(mm_segment_t fs)
}
#define get_user(x, p) __get_user(x, p)
-#define put_user(x, p) __put_user(x, p)
+#define __put_user_check __put_user_nocheck
#endif /* CONFIG_MMU */
@@ -408,36 +382,54 @@ do { \
__get_user_asm(x, addr, err, ldr)
#endif
+
+#define __put_user_switch(x, ptr, __err, __fn) \
+ do { \
+ const __typeof__(*(ptr)) __user *__pu_ptr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ unsigned int __ua_flags; \
+ might_fault(); \
+ __ua_flags = uaccess_save_and_enable(); \
+ switch (sizeof(*(ptr))) { \
+ case 1: __fn(__pu_val, __pu_ptr, __err, 1); break; \
+ case 2: __fn(__pu_val, __pu_ptr, __err, 2); break; \
+ case 4: __fn(__pu_val, __pu_ptr, __err, 4); break; \
+ case 8: __fn(__pu_val, __pu_ptr, __err, 8); break; \
+ default: __err = __put_user_bad(); break; \
+ } \
+ uaccess_restore(__ua_flags); \
+ } while (0)
+
+#define put_user(x, ptr) \
+({ \
+ int __pu_err = 0; \
+ __put_user_switch((x), (ptr), __pu_err, __put_user_check); \
+ __pu_err; \
+})
+
#define __put_user(x, ptr) \
({ \
long __pu_err = 0; \
- __put_user_err((x), (ptr), __pu_err); \
+ __put_user_switch((x), (ptr), __pu_err, __put_user_nocheck); \
__pu_err; \
})
#define __put_user_error(x, ptr, err) \
({ \
- __put_user_err((x), (ptr), err); \
+ __put_user_switch((x), (ptr), (err), __put_user_nocheck); \
(void) 0; \
})
-#define __put_user_err(x, ptr, err) \
-do { \
- unsigned long __pu_addr = (unsigned long)(ptr); \
- unsigned int __ua_flags; \
- __typeof__(*(ptr)) __pu_val = (x); \
- __chk_user_ptr(ptr); \
- might_fault(); \
- __ua_flags = uaccess_save_and_enable(); \
- switch (sizeof(*(ptr))) { \
- case 1: __put_user_asm_byte(__pu_val, __pu_addr, err); break; \
- case 2: __put_user_asm_half(__pu_val, __pu_addr, err); break; \
- case 4: __put_user_asm_word(__pu_val, __pu_addr, err); break; \
- case 8: __put_user_asm_dword(__pu_val, __pu_addr, err); break; \
- default: __put_user_bad(); \
- } \
- uaccess_restore(__ua_flags); \
-} while (0)
+#define __put_user_nocheck(x, __pu_ptr, __err, __size) \
+ do { \
+ unsigned long __pu_addr = (unsigned long)__pu_ptr; \
+ __put_user_nocheck_##__size(x, __pu_addr, __err); \
+ } while (0)
+
+#define __put_user_nocheck_1 __put_user_asm_byte
+#define __put_user_nocheck_2 __put_user_asm_half
+#define __put_user_nocheck_4 __put_user_asm_word
+#define __put_user_nocheck_8 __put_user_asm_dword
#define __put_user_asm(x, __pu_addr, err, instr) \
__asm__ __volatile__( \
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 32/47] ARM: 8794/1: uaccess: Prevent speculative use of the current addr_limit
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Julien Thierry <julien.thierry@arm.com>
Commit 621afc677465db231662ed126ae1f355bf8eac47 upstream.
A mispredicted conditional call to set_fs could result in the wrong
addr_limit being forwarded under speculation to a subsequent access_ok
check, potentially forming part of a spectre-v1 attack using uaccess
routines.
This patch prevents this forwarding from taking place, but putting heavy
barriers in set_fs after writing the addr_limit.
Porting commit c2f0ad4fc089cff8 ("arm64: uaccess: Prevent speculative use
of the current addr_limit").
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/uaccess.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index ecd159b45f12..a782201a2629 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -99,6 +99,14 @@ extern int __put_user_bad(void);
static inline void set_fs(mm_segment_t fs)
{
current_thread_info()->addr_limit = fs;
+
+ /*
+ * Prevent a mispredicted conditional call to set_fs from forwarding
+ * the wrong address limit to access_ok under speculation.
+ */
+ dsb(nsh);
+ isb();
+
modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
}
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 31/47] ARM: 8793/1: signal: replace __put_user_error with __put_user
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Julien Thierry <julien.thierry@arm.com>
Commit 18ea66bd6e7a95bdc598223d72757190916af28b upstream.
With Spectre-v1.1 mitigations, __put_user_error is pointless. In an attempt
to remove it, replace its references in frame setups with __put_user.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/kernel/signal.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 6f0bd90f6d93..4a4ab72d27ba 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -301,7 +301,7 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
if (err == 0)
err |= preserve_vfp_context(&aux->vfp);
#endif
- __put_user_error(0, &aux->end_magic, err);
+ err |= __put_user(0, &aux->end_magic);
return err;
}
@@ -433,7 +433,7 @@ setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
/*
* Set uc.uc_flags to a value which sc.trap_no would never have.
*/
- __put_user_error(0x5ac3c35a, &frame->uc.uc_flags, err);
+ err = __put_user(0x5ac3c35a, &frame->uc.uc_flags);
err |= setup_sigframe(frame, regs, set);
if (err == 0)
@@ -453,8 +453,8 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
err |= copy_siginfo_to_user(&frame->info, &ksig->info);
- __put_user_error(0, &frame->sig.uc.uc_flags, err);
- __put_user_error(NULL, &frame->sig.uc.uc_link, err);
+ err |= __put_user(0, &frame->sig.uc.uc_flags);
+ err |= __put_user(NULL, &frame->sig.uc.uc_link);
err |= __save_altstack(&frame->sig.uc.uc_stack, regs->ARM_sp);
err |= setup_sigframe(&frame->sig, regs, set);
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 30/47] ARM: 8792/1: oabi-compat: copy oabi events using __copy_to_user()
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Julien Thierry <julien.thierry@arm.com>
Commit 319508902600c2688e057750148487996396e9ca upstream.
Copy events to user using __copy_to_user() rather than copy members of
individually with __put_user_error().
This has the benefit of disabling/enabling PAN once per event intead of
once per event member.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/kernel/sys_oabi-compat.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 640748e27035..d844c5c9364b 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -276,6 +276,7 @@ asmlinkage long sys_oabi_epoll_wait(int epfd,
int maxevents, int timeout)
{
struct epoll_event *kbuf;
+ struct oabi_epoll_event e;
mm_segment_t fs;
long ret, err, i;
@@ -294,8 +295,11 @@ asmlinkage long sys_oabi_epoll_wait(int epfd,
set_fs(fs);
err = 0;
for (i = 0; i < ret; i++) {
- __put_user_error(kbuf[i].events, &events->events, err);
- __put_user_error(kbuf[i].data, &events->data, err);
+ e.events = kbuf[i].events;
+ e.data = kbuf[i].data;
+ err = __copy_to_user(events, &e, sizeof(e));
+ if (err)
+ break;
events++;
}
kfree(kbuf);
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 29/47] ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Julien Thierry <julien.thierry@arm.com>
Commit 3aa2df6ec2ca6bc143a65351cca4266d03a8bc41 upstream.
Use __copy_to_user() rather than __put_user_error() for individual
members when saving VFP state.
This has the benefit of disabling/enabling PAN once per copied struct
intead of once per write.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/thread_info.h | 4 ++--
arch/arm/kernel/signal.c | 13 +++++++------
arch/arm/vfp/vfpmodule.c | 20 ++++++++------------
3 files changed, 17 insertions(+), 20 deletions(-)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 57d2ad9c75ca..df8420672c7e 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -124,8 +124,8 @@ extern void vfp_flush_hwstate(struct thread_info *);
struct user_vfp;
struct user_vfp_exc;
-extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
- struct user_vfp_exc __user *);
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp *,
+ struct user_vfp_exc *);
extern int vfp_restore_user_hwstate(struct user_vfp *,
struct user_vfp_exc *);
#endif
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 98685e2523bf..6f0bd90f6d93 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -94,17 +94,18 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
static int preserve_vfp_context(struct vfp_sigframe __user *frame)
{
- const unsigned long magic = VFP_MAGIC;
- const unsigned long size = VFP_STORAGE_SIZE;
+ struct vfp_sigframe kframe;
int err = 0;
- __put_user_error(magic, &frame->magic, err);
- __put_user_error(size, &frame->size, err);
+ memset(&kframe, 0, sizeof(kframe));
+ kframe.magic = VFP_MAGIC;
+ kframe.size = VFP_STORAGE_SIZE;
+ err = vfp_preserve_user_clear_hwstate(&kframe.ufp, &kframe.ufp_exc);
if (err)
- return -EFAULT;
+ return err;
- return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
+ return __copy_to_user(frame, &kframe, sizeof(kframe));
}
static int restore_vfp_context(struct vfp_sigframe __user *auxp)
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 7aa6366b2a8d..f07567eedd82 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -558,12 +558,11 @@ void vfp_flush_hwstate(struct thread_info *thread)
* Save the current VFP state into the provided structures and prepare
* for entry into a new function (signal handler).
*/
-int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
- struct user_vfp_exc __user *ufp_exc)
+int vfp_preserve_user_clear_hwstate(struct user_vfp *ufp,
+ struct user_vfp_exc *ufp_exc)
{
struct thread_info *thread = current_thread_info();
struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
- int err = 0;
/* Ensure that the saved hwstate is up-to-date. */
vfp_sync_hwstate(thread);
@@ -572,22 +571,19 @@ int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
*/
- err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
- sizeof(hwstate->fpregs));
+ memcpy(&ufp->fpregs, &hwstate->fpregs, sizeof(hwstate->fpregs));
+
/*
* Copy the status and control register.
*/
- __put_user_error(hwstate->fpscr, &ufp->fpscr, err);
+ ufp->fpscr = hwstate->fpscr;
/*
* Copy the exception registers.
*/
- __put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
- __put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
- __put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
-
- if (err)
- return -EFAULT;
+ ufp_exc->fpexc = hwstate->fpexc;
+ ufp_exc->fpinst = hwstate->fpinst;
+ ufp_exc->fpinst2 = ufp_exc->fpinst2;
/* Ensure that VFP is disabled. */
vfp_flush_hwstate(thread);
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 28/47] ARM: 8789/1: signal: copy registers using __copy_to_user()
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Julien Thierry <julien.thierry@arm.com>
Commit 5ca451cf6ed04443774bbb7ee45332dafa42e99f upstream.
When saving the ARM integer registers, use __copy_to_user() to
copy them into user signal frame, rather than __put_user_error().
This has the benefit of disabling/enabling PAN once for the whole copy
intead of once per write.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/kernel/signal.c | 49 ++++++++++++++++++++++------------------
1 file changed, 27 insertions(+), 22 deletions(-)
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 76f85c38f2b8..98685e2523bf 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -255,30 +255,35 @@ static int
setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
{
struct aux_sigframe __user *aux;
+ struct sigcontext context;
int err = 0;
- __put_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err);
- __put_user_error(regs->ARM_r1, &sf->uc.uc_mcontext.arm_r1, err);
- __put_user_error(regs->ARM_r2, &sf->uc.uc_mcontext.arm_r2, err);
- __put_user_error(regs->ARM_r3, &sf->uc.uc_mcontext.arm_r3, err);
- __put_user_error(regs->ARM_r4, &sf->uc.uc_mcontext.arm_r4, err);
- __put_user_error(regs->ARM_r5, &sf->uc.uc_mcontext.arm_r5, err);
- __put_user_error(regs->ARM_r6, &sf->uc.uc_mcontext.arm_r6, err);
- __put_user_error(regs->ARM_r7, &sf->uc.uc_mcontext.arm_r7, err);
- __put_user_error(regs->ARM_r8, &sf->uc.uc_mcontext.arm_r8, err);
- __put_user_error(regs->ARM_r9, &sf->uc.uc_mcontext.arm_r9, err);
- __put_user_error(regs->ARM_r10, &sf->uc.uc_mcontext.arm_r10, err);
- __put_user_error(regs->ARM_fp, &sf->uc.uc_mcontext.arm_fp, err);
- __put_user_error(regs->ARM_ip, &sf->uc.uc_mcontext.arm_ip, err);
- __put_user_error(regs->ARM_sp, &sf->uc.uc_mcontext.arm_sp, err);
- __put_user_error(regs->ARM_lr, &sf->uc.uc_mcontext.arm_lr, err);
- __put_user_error(regs->ARM_pc, &sf->uc.uc_mcontext.arm_pc, err);
- __put_user_error(regs->ARM_cpsr, &sf->uc.uc_mcontext.arm_cpsr, err);
-
- __put_user_error(current->thread.trap_no, &sf->uc.uc_mcontext.trap_no, err);
- __put_user_error(current->thread.error_code, &sf->uc.uc_mcontext.error_code, err);
- __put_user_error(current->thread.address, &sf->uc.uc_mcontext.fault_address, err);
- __put_user_error(set->sig[0], &sf->uc.uc_mcontext.oldmask, err);
+ context = (struct sigcontext) {
+ .arm_r0 = regs->ARM_r0,
+ .arm_r1 = regs->ARM_r1,
+ .arm_r2 = regs->ARM_r2,
+ .arm_r3 = regs->ARM_r3,
+ .arm_r4 = regs->ARM_r4,
+ .arm_r5 = regs->ARM_r5,
+ .arm_r6 = regs->ARM_r6,
+ .arm_r7 = regs->ARM_r7,
+ .arm_r8 = regs->ARM_r8,
+ .arm_r9 = regs->ARM_r9,
+ .arm_r10 = regs->ARM_r10,
+ .arm_fp = regs->ARM_fp,
+ .arm_ip = regs->ARM_ip,
+ .arm_sp = regs->ARM_sp,
+ .arm_lr = regs->ARM_lr,
+ .arm_pc = regs->ARM_pc,
+ .arm_cpsr = regs->ARM_cpsr,
+
+ .trap_no = current->thread.trap_no,
+ .error_code = current->thread.error_code,
+ .fault_address = current->thread.address,
+ .oldmask = set->sig[0],
+ };
+
+ err |= __copy_to_user(&sf->uc.uc_mcontext, &context, sizeof(context));
err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 27/47] ARM: spectre-v1: mitigate user accesses
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit a3c0f84765bb429ba0fd23de1c57b5e1591c9389 upstream.
Spectre variant 1 attacks are about this sequence of pseudo-code:
index = load(user-manipulated pointer);
access(base + index * stride);
In order for the cache side-channel to work, the access() must me made
to memory which userspace can detect whether cache lines have been
loaded. On 32-bit ARM, this must be either user accessible memory, or
a kernel mapping of that same user accessible memory.
The problem occurs when the load() speculatively loads privileged data,
and the subsequent access() is made to user accessible memory.
Any load() which makes use of a user-maniplated pointer is a potential
problem if the data it has loaded is used in a subsequent access. This
also applies for the access() if the data loaded by that access is used
by a subsequent access.
Harden the get_user() accessors against Spectre attacks by forcing out
of bounds addresses to a NULL pointer. This prevents get_user() being
used as the load() step above. As a side effect, put_user() will also
be affected even though it isn't implicated.
Also harden copy_from_user() by redoing the bounds check within the
arm_copy_from_user() code, and NULLing the pointer if out of bounds.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/assembler.h | 4 ++++
arch/arm/lib/copy_from_user.S | 9 +++++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 307901f88a1e..483481c6937e 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -454,6 +454,10 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
adds \tmp, \addr, #\size - 1
sbcccs \tmp, \tmp, \limit
bcs \bad
+#ifdef CONFIG_CPU_SPECTRE
+ movcs \addr, #0
+ csdb
+#endif
#endif
.endm
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 1512bebfbf1b..d36329cefedc 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -90,6 +90,15 @@
.text
ENTRY(arm_copy_from_user)
+#ifdef CONFIG_CPU_SPECTRE
+ get_thread_info r3
+ ldr r3, [r3, #TI_ADDR_LIMIT]
+ adds ip, r1, r2 @ ip=addr+size
+ sub r3, r3, #1 @ addr_limit - 1
+ cmpcc ip, r3 @ if (addr+size > addr_limit - 1)
+ movcs r1, #0 @ addr = NULL
+ csdb
+#endif
#include "copy_template.S"
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 26/47] ARM: spectre-v1: use get_user() for __get_user()
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit b1cd0a14806321721aae45f5446ed83a3647c914 upstream.
Fixing __get_user() for spectre variant 1 is not sane: we would have to
add address space bounds checking in order to validate that the location
should be accessed, and then zero the address if found to be invalid.
Since __get_user() is supposed to avoid the bounds check, and this is
exactly what get_user() does, there's no point having two different
implementations that are doing the same thing. So, when the Spectre
workarounds are required, make __get_user() an alias of get_user().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/uaccess.h | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 968b50063431..ecd159b45f12 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -314,6 +314,15 @@ static inline void set_fs(mm_segment_t fs)
#define user_addr_max() \
(segment_eq(get_fs(), KERNEL_DS) ? ~0UL : get_fs())
+#ifdef CONFIG_CPU_SPECTRE
+/*
+ * When mitigating Spectre variant 1, it is not worth fixing the non-
+ * verifying accessors, because we need to add verification of the
+ * address space there. Force these to use the standard get_user()
+ * version instead.
+ */
+#define __get_user(x, ptr) get_user(x, ptr)
+#else
/*
* The "__xxx" versions of the user access functions do not verify the
* address space - it must have been done previously with a separate
@@ -330,12 +339,6 @@ static inline void set_fs(mm_segment_t fs)
__gu_err; \
})
-#define __get_user_error(x, ptr, err) \
-({ \
- __get_user_err((x), (ptr), err); \
- (void) 0; \
-})
-
#define __get_user_err(x, ptr, err) \
do { \
unsigned long __gu_addr = (unsigned long)(ptr); \
@@ -395,6 +398,7 @@ do { \
#define __get_user_asm_word(x, addr, err) \
__get_user_asm(x, addr, err, ldr)
+#endif
#define __put_user(x, ptr) \
({ \
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 25/47] ARM: use __inttype() in get_user()
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit d09fbb327d670737ab40fd8bbb0765ae06b8b739 upstream.
Borrow the x86 implementation of __inttype() to use in get_user() to
select an integer type suitable to temporarily hold the result value.
This is necessary to avoid propagating the volatile nature of the
result argument, which can cause the following warning:
lib/iov_iter.c:413:5: warning: optimization may eliminate reads and/or writes to register variables [-Wvolatile-register-var]
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/include/asm/uaccess.h | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index cd8b589111ba..968b50063431 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -122,6 +122,13 @@ static inline void set_fs(mm_segment_t fs)
: "cc"); \
flag; })
+/*
+ * This is a type: either unsigned long, if the argument fits into
+ * that type, or otherwise unsigned long long.
+ */
+#define __inttype(x) \
+ __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
+
/*
* Single-value transfer routines. They automatically use the right
* size if we just have the right pointer type. Note that the functions
@@ -191,7 +198,7 @@ extern int __get_user_64t_4(void *);
({ \
unsigned long __limit = current_thread_info()->addr_limit - 1; \
register const typeof(*(p)) __user *__p asm("r0") = (p);\
- register typeof(x) __r2 asm("r2"); \
+ register __inttype(x) __r2 asm("r2"); \
register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
unsigned int __ua_flags = uaccess_save_and_enable(); \
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH ARM32 v4.4 V2 24/47] ARM: oabi-compat: copy semops using __copy_from_user()
From: Viresh Kumar @ 2019-08-01 8:16 UTC (permalink / raw)
To: stable
Cc: Mark Rutland, Julien Thierry, Marc Zyngier, Viresh Kumar,
guohanjun, Will Deacon, mark.brown, Catalin Marinas, Russell King,
linux-arm-kernel
In-Reply-To: <cover.1564646727.git.viresh.kumar@linaro.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
Commit 8c8484a1c18e3231648f5ba7cc5ffb7fd70b3ca4 upstream.
__get_user_error() is used as a fast accessor to make copying structure
members as efficient as possible. However, with software PAN and the
recent Spectre variant 1, the efficiency is reduced as these are no
longer fast accessors.
In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.
Rather than using __get_user_error() to copy each semops element member,
copy each semops element in full using __copy_from_user().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/kernel/sys_oabi-compat.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 5f221acd21ae..640748e27035 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -328,9 +328,11 @@ asmlinkage long sys_oabi_semtimedop(int semid,
return -ENOMEM;
err = 0;
for (i = 0; i < nsops; i++) {
- __get_user_error(sops[i].sem_num, &tsops->sem_num, err);
- __get_user_error(sops[i].sem_op, &tsops->sem_op, err);
- __get_user_error(sops[i].sem_flg, &tsops->sem_flg, err);
+ struct oabi_sembuf osb;
+ err |= __copy_from_user(&osb, tsops, sizeof(osb));
+ sops[i].sem_num = osb.sem_num;
+ sops[i].sem_op = osb.sem_op;
+ sops[i].sem_flg = osb.sem_flg;
tsops++;
}
if (timeout) {
--
2.21.0.rc0.269.g1a574e7a288b
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox