Linux-ARM-Kernel Archive on lore.kernel.org

* [PATCH v4 09/21] ARM: dts: imx6qdl-colibri: add phy to fec
From: Philippe Schenker @ 2019-08-12 14:21 UTC (permalink / raw)
  To: Marcel Ziswiler, Max Krummenacher, stefan@agner.ch,
	devicetree@vger.kernel.org, Rob Herring, Shawn Guo, Mark Rutland,
	Michal Vokáč, Fabio Estevam
  Cc: Sascha Hauer, linux-kernel@vger.kernel.org, Philippe Schenker,
	NXP Linux Team, Pengutronix Kernel Team,
	linux-arm-kernel@lists.infradead.org
In-Reply-To: <20190812142105.1995-1-philippe.schenker@toradex.com>

Add the phy-node and mdio bus to the fec-node, represented as is on
hardware.
This commit includes micrel,led-mode that is set to the default
value, prepared for someone who wants to change this.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

Changes in v4:
- Add Marcel Ziswiler's Ack

Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 1beac22266ed..019dda6b88ad 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -140,7 +140,18 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			micrel,led-mode = <0>;
+		};
+	};
 };
 
 &hdmi {
-- 
2.22.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related