* [PATCH] ARM: configs: sama5: Enable current Microchip KSZ DSA symbols
From: Pengpeng Hou @ 2026-06-24 8:12 UTC (permalink / raw)
To: Russell King; +Cc: Pengpeng Hou, linux-arm-kernel, linux-kernel
The Microchip KSZ DSA family now uses `NET_DSA_MICROCHIP_KSZ_COMMON`
for the common switch provider and `NET_DSA_MICROCHIP_KSZ_SPI` for SPI
attached switches.
The sama5 defconfig still enables the stale `KSZ9477`-specific symbols.
Those symbols no longer select the provider objects, while SAMA5 device
trees still contain Microchip KSZ SPI switch consumers such as
`microchip,ksz9477` and `microchip,ksz8563`.
Enable the current common and SPI provider symbols instead.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
---
arch/arm/configs/sama5_defconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -70,7 +70,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
-CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m
+CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m
+CONFIG_NET_DSA_MICROCHIP_KSZ_SPI=m
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_MACB=y
# CONFIG_NET_VENDOR_CIRRUS is not set
^ permalink raw reply
* [PATCH v6 5/9] media: chips-media: wave6: Add Wave6 core driver
From: Nas Chung @ 2026-06-24 7:20 UTC (permalink / raw)
To: mchehab, hverkuil, robh, krzk+dt, conor+dt, shawnguo, s.hauer
Cc: linux-media, devicetree, linux-kernel, linux-imx,
linux-arm-kernel, jackson.lee, lafley.kim, marek.vasut, Nas Chung,
Ming Qian
In-Reply-To: <20260624072043.238-1-nas.chung@chipsnmedia.com>
Add the core driver for the Chips&Media Wave6 video codec IP.
The hardware contains one control register region and four interface
register regions for a shared video processing engine. This driver
handles the interface register regions, each with its own MMIO range and
interrupt, while relying on the control driver for firmware loading and
shared resource management.
It configures the V4L2 mem2mem devices and communicates with the Wave6
hardware to perform video processing tasks.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Ming Qian <ming.qian@oss.nxp.com>
Tested-by: Marek Vasut <marek.vasut@mailbox.org>
---
.../chips-media/wave6/wave6-vpu-core.c | 437 ++++++++++++++++++
.../chips-media/wave6/wave6-vpu-core.h | 126 +++++
2 files changed, 563 insertions(+)
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-core.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-core.h
diff --git a/drivers/media/platform/chips-media/wave6/wave6-vpu-core.c b/drivers/media/platform/chips-media/wave6/wave6-vpu-core.c
new file mode 100644
index 000000000000..e54a2a39ff9a
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/wave6-vpu-core.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Wave6 series multi-standard codec IP - wave6 core driver
+ *
+ * Copyright (C) 2025 CHIPS&MEDIA INC
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/debugfs.h>
+#include <linux/iopoll.h>
+#include "wave6-vpu-core.h"
+#include "wave6-regdefine.h"
+#include "wave6-vpuconfig.h"
+#include "wave6-hw.h"
+#include "wave6-vpu-dbg.h"
+
+#define CREATE_TRACE_POINTS
+#include "wave6-trace.h"
+
+#define WAVE6_VPU_DEBUGFS_DIR "wave6"
+
+static irqreturn_t wave6_vpu_core_irq(int irq, void *dev_id)
+{
+ struct vpu_core_device *core = dev_id;
+ struct vpu_irq irq_info;
+
+ if (!vpu_read_reg(core, W6_VPU_VPU_INT_STS))
+ return IRQ_NONE;
+
+ irq_info.status = vpu_read_reg(core, W6_VPU_VINT_REASON);
+ irq_info.inst_idc = vpu_read_reg(core, W6_RET_INT_INSTANCE_INFO);
+
+ vpu_write_reg(core, W6_RET_INT_INSTANCE_INFO, INT_INSTANCE_INFO_CLEAR);
+ vpu_write_reg(core, W6_VPU_VINT_REASON_CLEAR, irq_info.status);
+ vpu_write_reg(core, W6_VPU_VINT_CLEAR, VINT_CLEAR);
+
+ trace_wave6_vpu_irq(core, irq_info.status, irq_info.inst_idc);
+
+ if (irq_info.status & BIT(W6_INT_BIT_REQ_WORK_BUF)) {
+ if (core->vpu)
+ core->vpu->req_work_buffer(core->vpu, core);
+
+ return IRQ_HANDLED;
+ }
+
+ kfifo_in(&core->irq_fifo, &irq_info, sizeof(struct vpu_irq));
+
+ return IRQ_WAKE_THREAD;
+}
+
+static struct vpu_instance *wave6_vpu_core_get_instance(struct vpu_core_device *core,
+ u32 inst_idc)
+{
+ struct vpu_instance *inst;
+
+ guard(spinlock)(&core->inst_lock);
+
+ list_for_each_entry(inst, &core->instances, list) {
+ if ((BIT(inst->id) & inst_idc) && inst->enable) {
+ atomic_inc(&inst->refcount);
+ return inst;
+ }
+ }
+
+ return NULL;
+}
+
+static void wave6_vpu_core_put_instance(struct vpu_instance *inst)
+{
+ if (!inst)
+ return;
+
+ guard(spinlock)(&inst->dev->inst_lock);
+ atomic_dec_if_positive(&inst->refcount);
+}
+
+void wave6_vpu_enable_instance(struct vpu_instance *inst)
+{
+ scoped_guard(spinlock, &inst->dev->inst_lock) {
+ atomic_set(&inst->refcount, 0);
+ inst->enable = true;
+ }
+}
+
+void wave6_vpu_disable_instance(struct vpu_instance *inst)
+{
+ int count;
+
+ scoped_guard(spinlock, &inst->dev->inst_lock)
+ inst->enable = false;
+
+ if (read_poll_timeout(atomic_read, count, !count,
+ W6_VPU_POLL_DELAY_US,
+ W6_VPU_POLL_TIMEOUT,
+ true, &inst->refcount))
+ dev_dbg(inst->dev->dev, "[%d] disable timeout\n", inst->id);
+}
+
+static irqreturn_t wave6_vpu_core_irq_thread(int irq, void *dev_id)
+{
+ struct vpu_core_device *core = dev_id;
+ struct vpu_instance *inst;
+ struct vpu_irq irq_info;
+
+ while (kfifo_len(&core->irq_fifo)) {
+ bool error = false;
+
+ if (!kfifo_out(&core->irq_fifo, &irq_info, sizeof(struct vpu_irq)))
+ break;
+
+ inst = wave6_vpu_core_get_instance(core, irq_info.inst_idc);
+ if (!inst)
+ continue;
+
+ if ((irq_info.status & BIT(W6_INT_BIT_INIT_SEQ)) ||
+ (irq_info.status & BIT(W6_INT_BIT_ENC_SET_PARAM))) {
+ complete(&inst->irq_done);
+ wave6_vpu_core_put_instance(inst);
+ continue;
+ }
+
+ if (irq_info.status & BIT(W6_INT_BIT_BSBUF_ERROR))
+ error = true;
+
+ if (inst->ops && inst->ops->finish_process)
+ inst->ops->finish_process(inst, error);
+
+ wave6_vpu_core_put_instance(inst);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void wave6_vpu_core_check_state(struct vpu_core_device *core)
+{
+ u32 val;
+ int ret;
+
+ guard(mutex)(&core->hw_lock);
+
+ ret = read_poll_timeout(vpu_read_reg, val, val != 0,
+ W6_VPU_POLL_DELAY_US, W6_VPU_POLL_TIMEOUT,
+ false, core, W6_VPU_VCPU_CUR_PC);
+ if (ret)
+ return;
+
+ wave6_vpu_enable_interrupt(core);
+ ret = wave6_vpu_get_version(core);
+ if (ret) {
+ dev_err(core->dev, "wave6_vpu_get_version fail\n");
+ return;
+ }
+
+ dev_dbg(core->dev, "product 0x%x, fw_ver %d.%d.%d(r%d), hw_ver 0x%x\n",
+ core->attr.product_code,
+ FW_VERSION_MAJOR(core->attr.fw_version),
+ FW_VERSION_MINOR(core->attr.fw_version),
+ FW_VERSION_REL(core->attr.fw_version),
+ core->attr.fw_revision,
+ core->attr.hw_version);
+
+ if (core->attr.fw_version < core->res->compatible_fw_version)
+ dev_err(core->dev, "fw version is too low (< v%d.%d.%d)\n",
+ FW_VERSION_MAJOR(core->res->compatible_fw_version),
+ FW_VERSION_MINOR(core->res->compatible_fw_version),
+ FW_VERSION_REL(core->res->compatible_fw_version));
+}
+
+void wave6_vpu_core_activate(struct vpu_core_device *core)
+{
+ core->active = true;
+}
+
+static void wave6_vpu_core_wait_activated(struct vpu_core_device *core)
+{
+ if (core->active)
+ wave6_vpu_core_check_state(core);
+}
+
+static int wave6_vpu_core_probe(struct platform_device *pdev)
+{
+ struct vpu_core_device *core;
+ const struct wave6_vpu_core_resource *res;
+ int ret;
+ int irq;
+
+ res = dev_get_platdata(&pdev->dev);
+ if (!res) {
+ dev_err(&pdev->dev, "There is no platform data\n");
+ return -ENODEV;
+ }
+
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to set DMA mask: %d\n", ret);
+ return ret;
+ }
+
+ core = devm_kzalloc(&pdev->dev, sizeof(*core), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+
+ ret = devm_mutex_init(&pdev->dev, &core->dev_lock);
+ if (ret)
+ return ret;
+
+ ret = devm_mutex_init(&pdev->dev, &core->hw_lock);
+ if (ret)
+ return ret;
+
+ spin_lock_init(&core->inst_lock);
+ INIT_LIST_HEAD(&core->instances);
+ dev_set_drvdata(&pdev->dev, core);
+ core->dev = &pdev->dev;
+ core->res = res;
+
+ if (pdev->dev.parent->driver && pdev->dev.parent->driver->name &&
+ !strcmp(pdev->dev.parent->driver->name, WAVE6_VPU_PLATFORM_DRIVER_NAME))
+ core->vpu = dev_get_drvdata(pdev->dev.parent);
+
+ core->reg_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(core->reg_base))
+ return PTR_ERR(core->reg_base);
+
+ ret = devm_clk_bulk_get_all(&pdev->dev, &core->clks);
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret, "failed to get clocks\n");
+
+ core->num_clks = ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq,
+ wave6_vpu_core_irq,
+ wave6_vpu_core_irq_thread,
+ 0, "vpu_irq", core);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request IRQ: %d\n", ret);
+ return ret;
+ }
+
+ ret = v4l2_device_register(&pdev->dev, &core->v4l2_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register v4l2_dev: %d\n", ret);
+ return ret;
+ }
+
+ ret = wave6_vpu_init_m2m_dev(core);
+ if (ret)
+ goto err_v4l2_unregister;
+
+ ret = kfifo_alloc(&core->irq_fifo,
+ MAX_NUM_INSTANCE * sizeof(struct vpu_irq),
+ GFP_KERNEL);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to allocate fifo\n");
+ goto err_m2m_dev_release;
+ }
+
+ core->temp_vbuf.size = ALIGN(W6_TEMPBUF_SIZE, 4096);
+ ret = wave6_vdi_alloc_dma(core->dev, &core->temp_vbuf);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to allocate temp_vbuf: %d\n", ret);
+ goto err_kfifo_free;
+ }
+
+ core->debugfs = debugfs_lookup(WAVE6_VPU_DEBUGFS_DIR, NULL);
+ if (!IS_ERR_OR_NULL(core->debugfs))
+ dput(core->debugfs);
+ else
+ core->debugfs = debugfs_create_dir(WAVE6_VPU_DEBUGFS_DIR, NULL);
+
+ pm_runtime_enable(&pdev->dev);
+
+ if (core->res->codec_types & WAVE6_IS_DEC) {
+ ret = wave6_vpu_dec_register_device(core);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to register video_dev_dec: %d\n", ret);
+ goto err_temp_vbuf_free;
+ }
+ }
+ if (core->res->codec_types & WAVE6_IS_ENC) {
+ ret = wave6_vpu_enc_register_device(core);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to register video_dev_enc: %d\n", ret);
+ goto err_dec_unreg;
+ }
+ }
+
+ dev_dbg(&pdev->dev, "Added wave6 driver with caps %s %s\n",
+ core->res->codec_types & WAVE6_IS_ENC ? "'ENCODE'" : "",
+ core->res->codec_types & WAVE6_IS_DEC ? "'DECODE'" : "");
+
+ return 0;
+
+err_dec_unreg:
+ if (core->res->codec_types & WAVE6_IS_DEC)
+ wave6_vpu_dec_unregister_device(core);
+err_temp_vbuf_free:
+ pm_runtime_disable(&pdev->dev);
+ wave6_vdi_free_dma(&core->temp_vbuf);
+err_kfifo_free:
+ kfifo_free(&core->irq_fifo);
+err_m2m_dev_release:
+ wave6_vpu_release_m2m_dev(core);
+err_v4l2_unregister:
+ v4l2_device_unregister(&core->v4l2_dev);
+
+ return ret;
+}
+
+static void wave6_vpu_core_remove(struct platform_device *pdev)
+{
+ struct vpu_core_device *core = dev_get_drvdata(&pdev->dev);
+
+ pm_runtime_disable(&pdev->dev);
+
+ wave6_vpu_enc_unregister_device(core);
+ wave6_vpu_dec_unregister_device(core);
+ wave6_vdi_free_dma(&core->temp_vbuf);
+ kfifo_free(&core->irq_fifo);
+ wave6_vpu_release_m2m_dev(core);
+ v4l2_device_unregister(&core->v4l2_dev);
+}
+
+static int wave6_vpu_core_runtime_suspend(struct device *dev)
+{
+ struct vpu_core_device *core = dev_get_drvdata(dev);
+
+ if (WARN_ON(!core))
+ return -ENODEV;
+
+ /*
+ * Only call parent VPU put_vpu if the core has a parent and is active.
+ * - core->vpu: prevent access in core without parent VPU.
+ * - core->active: execute sleep only after m2m streaming is started.
+ */
+ if (core->vpu && core->active)
+ core->vpu->put_vpu(core->vpu, core);
+
+ if (core->num_clks)
+ clk_bulk_disable_unprepare(core->num_clks, core->clks);
+
+ return 0;
+}
+
+static int wave6_vpu_core_runtime_resume(struct device *dev)
+{
+ struct vpu_core_device *core = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (WARN_ON(!core))
+ return -ENODEV;
+
+ if (core->num_clks) {
+ ret = clk_bulk_prepare_enable(core->num_clks, core->clks);
+ if (ret) {
+ dev_err(dev, "failed to enable clocks: %d\n", ret);
+ return ret;
+ }
+ }
+
+ /*
+ * Only call parent VPU get_vpu if the core has a parent and is active.
+ * - core->vpu: prevent access in core without parent VPU.
+ * - core->active: execute boot only after m2m streaming is started.
+ */
+ if (core->vpu && core->active)
+ ret = core->vpu->get_vpu(core->vpu, core);
+
+ if (!ret)
+ wave6_vpu_core_wait_activated(core);
+ else if (core->num_clks)
+ clk_bulk_disable_unprepare(core->num_clks, core->clks);
+
+ return ret;
+}
+
+static int wave6_vpu_core_suspend(struct device *dev)
+{
+ struct vpu_core_device *core = dev_get_drvdata(dev);
+ int ret;
+
+ v4l2_m2m_suspend(core->m2m_dev);
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ v4l2_m2m_resume(core->m2m_dev);
+
+ return ret;
+}
+
+static int wave6_vpu_core_resume(struct device *dev)
+{
+ struct vpu_core_device *core = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ v4l2_m2m_resume(core->m2m_dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops wave6_vpu_core_pm_ops = {
+ RUNTIME_PM_OPS(wave6_vpu_core_runtime_suspend,
+ wave6_vpu_core_runtime_resume, NULL)
+ SYSTEM_SLEEP_PM_OPS(wave6_vpu_core_suspend,
+ wave6_vpu_core_resume)
+};
+
+static struct platform_driver wave6_vpu_core_driver = {
+ .driver = {
+ .name = WAVE6_VPU_CORE_PLATFORM_DRIVER_NAME,
+ .pm = pm_ptr(&wave6_vpu_core_pm_ops),
+ },
+ .probe = wave6_vpu_core_probe,
+ .remove = wave6_vpu_core_remove,
+};
+
+module_platform_driver(wave6_vpu_core_driver);
+MODULE_ALIAS("platform:" WAVE6_VPU_CORE_PLATFORM_DRIVER_NAME);
+MODULE_DESCRIPTION("chips&media Wave6 VPU CORE V4L2 driver");
+MODULE_AUTHOR("CHIPS&MEDIA INC");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/media/platform/chips-media/wave6/wave6-vpu-core.h b/drivers/media/platform/chips-media/wave6/wave6-vpu-core.h
new file mode 100644
index 000000000000..779e8a132f57
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/wave6-vpu-core.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * Wave6 series multi-standard codec IP - wave6 core driver
+ *
+ * Copyright (C) 2025 CHIPS&MEDIA INC
+ */
+
+#ifndef __WAVE6_VPU_CORE_H__
+#define __WAVE6_VPU_CORE_H__
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fh.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/videobuf2-dma-contig.h>
+#include "wave6-vpuconfig.h"
+#include "wave6-vpuapi.h"
+
+#define vpu_write_reg(CORE, ADDR, DATA) wave6_vpu_writel(CORE, ADDR, DATA)
+#define vpu_read_reg(CORE, ADDR) wave6_vpu_readl(CORE, ADDR)
+
+struct vpu_buffer {
+ struct v4l2_m2m_buffer v4l2_m2m_buf;
+ bool consumed;
+ bool used;
+ bool error;
+ bool force_key_frame;
+ bool force_frame_qp;
+ u32 force_i_frame_qp;
+ u32 force_p_frame_qp;
+ u32 force_b_frame_qp;
+ ktime_t ts_input;
+ ktime_t ts_start;
+ ktime_t ts_finish;
+ ktime_t ts_output;
+ u64 hw_time;
+ u32 average_qp;
+};
+
+enum vpu_fmt_type {
+ VPU_FMT_TYPE_CODEC = 0,
+ VPU_FMT_TYPE_RAW = 1
+};
+
+#define VPU_FMT_FLAG_CBCR_INTERLEAVED BIT(0)
+#define VPU_FMT_FLAG_CRCB_ORDER BIT(1)
+#define VPU_FMT_FLAG_10BIT BIT(2)
+#define VPU_FMT_FLAG_RGB BIT(3)
+#define VPU_FMT_FLAG_SUPPORT_ROT_MIR BIT(4)
+
+struct vpu_format {
+ unsigned int v4l2_pix_fmt;
+ unsigned int max_width;
+ unsigned int min_width;
+ unsigned int max_height;
+ unsigned int min_height;
+ unsigned int num_planes;
+ enum frame_buffer_format fb_fmt;
+ enum endian_mode endian;
+ enum csc_format_order csc_fmt_order;
+ unsigned int flags;
+};
+
+static inline struct vpu_instance *wave6_fh_to_vpu_inst(struct v4l2_fh *vfh)
+{
+ return container_of(vfh, struct vpu_instance, v4l2_fh);
+}
+
+static inline struct vpu_instance *wave6_file_to_vpu_inst(struct file *filp)
+{
+ return wave6_fh_to_vpu_inst(file_to_v4l2_fh(filp));
+}
+
+static inline struct vpu_instance *wave6_ctrl_to_vpu_inst(struct v4l2_ctrl *vctrl)
+{
+ return container_of(vctrl->handler, struct vpu_instance, v4l2_ctrl_hdl);
+}
+
+static inline struct vpu_buffer *wave6_to_vpu_buf(struct vb2_v4l2_buffer *vbuf)
+{
+ return container_of(vbuf, struct vpu_buffer, v4l2_m2m_buf.vb);
+}
+
+static inline bool wave6_vpu_both_queues_are_streaming(struct vpu_instance *inst)
+{
+ struct vb2_queue *vq_cap = v4l2_m2m_get_dst_vq(inst->v4l2_fh.m2m_ctx);
+ struct vb2_queue *vq_out = v4l2_m2m_get_src_vq(inst->v4l2_fh.m2m_ctx);
+
+ return vb2_is_streaming(vq_cap) && vb2_is_streaming(vq_out);
+}
+
+u32 wave6_vpu_get_consumed_fb_num(struct vpu_instance *inst);
+void wave6_vpu_core_activate(struct vpu_core_device *core);
+void wave6_update_pix_fmt(struct v4l2_pix_format_mplane *pix_mp,
+ unsigned int width,
+ unsigned int height);
+struct vb2_v4l2_buffer *wave6_get_dst_buf_by_addr(struct vpu_instance *inst,
+ dma_addr_t addr);
+dma_addr_t wave6_get_dma_addr(struct vb2_v4l2_buffer *buf,
+ unsigned int plane_no);
+enum codec_std wave6_to_codec_std(enum vpu_instance_type type, unsigned int v4l2_pix_fmt);
+const char *wave6_vpu_instance_state_name(enum vpu_instance_state state);
+void wave6_vpu_set_instance_state(struct vpu_instance *inst,
+ enum vpu_instance_state state);
+u64 wave6_vpu_cycle_to_ns(struct vpu_core_device *core, u64 cycle);
+int wave6_vpu_wait_interrupt(struct vpu_instance *inst, unsigned int timeout);
+int wave6_vpu_dec_register_device(struct vpu_core_device *core);
+void wave6_vpu_dec_unregister_device(struct vpu_core_device *core);
+int wave6_vpu_enc_register_device(struct vpu_core_device *core);
+void wave6_vpu_enc_unregister_device(struct vpu_core_device *core);
+void wave6_vpu_finish_job(struct vpu_instance *inst);
+void wave6_vpu_record_performance_timestamps(struct vpu_instance *inst);
+void wave6_vpu_handle_performance(struct vpu_instance *inst,
+ struct vpu_buffer *vpu_buf);
+void wave6_vpu_reset_performance(struct vpu_instance *inst);
+int wave6_vpu_init_m2m_dev(struct vpu_core_device *core);
+void wave6_vpu_release_m2m_dev(struct vpu_core_device *core);
+int wave6_vpu_subscribe_event(struct v4l2_fh *fh,
+ const struct v4l2_event_subscription *sub);
+void wave6_vpu_return_buffers(struct vpu_instance *inst,
+ unsigned int type, enum vb2_buffer_state state);
+void wave6_vpu_enable_instance(struct vpu_instance *inst);
+void wave6_vpu_disable_instance(struct vpu_instance *inst);
+
+#endif /* __WAVE6_VPU_CORE_H__ */
--
2.31.1
^ permalink raw reply related
* Re: [PATCH] dt-bindings: mediatek: cec: Correct the compatibles for mt7623-mt8167
From: Krzysztof Kozlowski @ 2026-06-24 7:58 UTC (permalink / raw)
To: Luca Leonardo Scorcia
Cc: linux-mediatek, Chun-Kuang Hu, Philipp Zabel, David Airlie,
Simona Vetter, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Matthias Brugger, AngeloGioacchino Del Regno, CK Hu, Jitao shi,
dri-devel, devicetree, linux-kernel, linux-arm-kernel
In-Reply-To: <20260623135757.5111-1-l.scorcia@gmail.com>
On Tue, Jun 23, 2026 at 03:57:53PM +0200, Luca Leonardo Scorcia wrote:
> The HDMI CEC driver for both mt7623 and mt8167 is actually the same as
> mt8173-cec and the mt7623n.dtsi board include file already uses mt8173-cec
> compatible as a fallback, but the documentation lists them as separate
> entries. Correct the binding by adding the correct fallback.
>
> This change fixes a dtbs_check error.
which one? here you paste it (can be trimmed a bit)
>
> Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
> ---
> .../bindings/display/mediatek/mediatek,cec.yaml | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
> index 080cf321209e..4d741ba415e8 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
> @@ -15,10 +15,13 @@ description: |
>
> properties:
> compatible:
> - enum:
> - - mediatek,mt7623-cec
> - - mediatek,mt8167-cec
> - - mediatek,mt8173-cec
> + oneOf:
> + - const: mediatek,mt8173-cec
> + - items:
> + - enum:
"This change fixes a dtbs_check error."
... and introduces new other errors, so error count stays the same. Not
great.
It does not look like you tested the bindings, at least after quick
look. Please run 'make dt_binding_check' (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint. Don't rely on
distro packages for dtschema and be sure you are using the latest
released dtschema.
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v2] arm64: mm: Defer read-only remap of data/bss linear alias
From: Kevin Brodsky @ 2026-06-24 7:46 UTC (permalink / raw)
To: Ard Biesheuvel, linux-arm-kernel
Cc: linux-kernel, catalin.marinas, will, Ard Biesheuvel, Fuad Tabba
In-Reply-To: <20260623202817.2225495-2-ardb+git@google.com>
On 23/06/2026 22:28, Ard Biesheuvel wrote:
> From: Ard Biesheuvel <ardb@kernel.org>
>
> Since commit
>
> f2ba877402e5 ("arm64: mm: Map the kernel data/bss read-only in the linear map")
>
> the linear alias of the .data and .bss regions is remapped read-only
> early during the boot. (Note that a subsequent patch to unmap this
> region entirely was reverted just before the v7.2 merge window, and will
> be brought back in an improved form for the v7.3 cycle)
>
> Fuad reports that in some cases, the KVM init code may apply relocations
> to variables that reside in .data, and does so via the linear map. This
> means that remapping .data read-only beforehand is a bad idea, and
> results in an early boot crash.
>
> These variables in .data are only present when CONFIG_NVHE_EL2_DEBUG or
> CONFIG_NVHE_EL2_TRACING are enabled, which is why it was not spotted in
> testing.
>
> So move the remap to mark_rodata_ro(), which is a reasonable place to
> put this, and ensures that it happens much later during the boot. It
> also means that rodata=off is now taken into account, and so the linear
> alias will remain writable in that case.
>
> Fixes: f2ba877402e5 ("arm64: mm: Map the kernel data/bss read-only in the linear map")
> Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
> Tested-by: Fuad Tabba < fuad.tabba@linux.dev>
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Thanks for expanding the commit message!
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
> ---
> v2: improve changelog, add Fuad's R-b
>
> arch/arm64/mm/mmu.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
> index 9f354971b7e4..1f7eca86b5c1 100644
> --- a/arch/arm64/mm/mmu.c
> +++ b/arch/arm64/mm/mmu.c
> @@ -1198,11 +1198,6 @@ static void __init map_mem(void)
> __map_memblock(start, end, pgprot_tagged(PAGE_KERNEL),
> flags);
> }
> -
> - /* Map the kernel data/bss read-only in the linear map */
> - __map_memblock(init_end, kernel_end, PAGE_KERNEL_RO, flags);
> - flush_tlb_kernel_range((unsigned long)lm_alias(__init_end),
> - (unsigned long)lm_alias(__bss_stop));
> }
>
> void mark_rodata_ro(void)
> @@ -1221,6 +1216,12 @@ void mark_rodata_ro(void)
> update_mapping_prot(__pa_symbol(_text), (unsigned long)_text,
> (unsigned long)_stext - (unsigned long)_text,
> PAGE_KERNEL_RO);
> +
> + /* Map the kernel data/bss read-only in the linear map */
> + update_mapping_prot(__pa_symbol(__init_end),
> + (unsigned long)lm_alias(__init_end),
> + (unsigned long)__bss_stop - (unsigned long)__init_end,
> + PAGE_KERNEL_RO);
> }
>
> static void __init declare_vma(struct vm_struct *vma,
^ permalink raw reply
* Re: [PATCH v3 01/10] mailbox: imx: Forward the timeout/ error in imx_mu_generic_tx()
From: Sebastian Andrzej Siewior @ 2026-06-24 7:44 UTC (permalink / raw)
To: Peng Fan
Cc: linux-remoteproc, imx, linux-arm-kernel, linux-rt-devel,
Bjorn Andersson, Clark Williams, Fabio Estevam, Frank Li,
Jassi Brar, Mathieu Poirier, Pengutronix Kernel Team,
Sascha Hauer, Steven Rostedt
In-Reply-To: <ajkbUNkn6MSw8txc@shlinux89>
On 2026-06-22 19:24:00 [+0800], Peng Fan wrote:
> We may need to use atomic API for TXDB_V2. For the patchset itself, it
> looks good to me.
>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Thank you. Is there anything you want me to do or is this series good
as-is?
Sebastian
^ permalink raw reply
* Re: [PATCH v6 07/21] RISC-V: Add Sscfg extension CSR definition
From: Atish Patra @ 2026-06-24 7:36 UTC (permalink / raw)
To: Charlie Jenkins
Cc: James Clark, Rob Herring, Arnaldo Carvalho de Melo, Jiri Olsa,
Will Deacon, Mark Rutland, Anup Patel, Namhyung Kim,
Paul Walmsley, Krzysztof Kozlowski, Ian Rogers, linux-riscv,
linux-kernel, linux-perf-users, Conor Dooley, devicetree,
linux-arm-kernel
In-Reply-To: <ajjZkRxoh2F3vUAS@blinky>
On 6/21/26 11:43 PM, Charlie Jenkins wrote:
> On Mon, Jun 08, 2026 at 11:01:21PM -0700, Atish Patra wrote:
>> From: Kaiwen Xue <kaiwenx@rivosinc.com>
>>
>> This adds the scountinhibit CSR definition and S-mode accessible hpmevent
>> bits defined by smcdeleg/ssccfg. scountinhibit allows S-mode to start/stop
>> counters directly from S-mode without invoking SBI calls to M-mode. It is
>> also used to figure out the counters delegated to S-mode by the M-mode as
>> well.
>>
>> Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
>> Reviewed-by: Clément Léger <cleger@rivosinc.com>
>> ---
>> arch/riscv/include/asm/csr.h | 26 ++++++++++++++++++++++++++
>> 1 file changed, 26 insertions(+)
>>
>> diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
>> index b4551a6cf7cb..26cb78dee2fd 100644
>> --- a/arch/riscv/include/asm/csr.h
>> +++ b/arch/riscv/include/asm/csr.h
>> @@ -241,6 +241,31 @@
>> #define SMSTATEEN0_HSENVCFG (_ULL(1) << SMSTATEEN0_HSENVCFG_SHIFT)
>> #define SMSTATEEN0_SSTATEEN0_SHIFT 63
>> #define SMSTATEEN0_SSTATEEN0 (_ULL(1) << SMSTATEEN0_SSTATEEN0_SHIFT)
>> +/* HPMEVENT bits. These are accessible in S-mode via Smcdeleg/Ssccfg */
>> +#ifdef CONFIG_64BIT
>> +#define HPMEVENT_OF (BIT_ULL(63))
>> +#define HPMEVENT_MINH (BIT_ULL(62))
>> +#define HPMEVENT_SINH (BIT_ULL(61))
>> +#define HPMEVENT_UINH (BIT_ULL(60))
>> +#define HPMEVENT_VSINH (BIT_ULL(59))
>> +#define HPMEVENT_VUINH (BIT_ULL(58))
>> +#else
>> +#define HPMEVENTH_OF (BIT_ULL(31))
>> +#define HPMEVENTH_MINH (BIT_ULL(30))
>> +#define HPMEVENTH_SINH (BIT_ULL(29))
>> +#define HPMEVENTH_UINH (BIT_ULL(28))
>> +#define HPMEVENTH_VSINH (BIT_ULL(27))
>> +#define HPMEVENTH_VUINH (BIT_ULL(26))
> Since these are rv32 bits for a 32-bit register, I think these should be
> BIT() instead of BIT_ULL()
>
>> +
>> +#define HPMEVENT_OF (HPMEVENTH_OF << 32)
>> +#define HPMEVENT_MINH (HPMEVENTH_MINH << 32)
>> +#define HPMEVENT_SINH (HPMEVENTH_SINH << 32)
>> +#define HPMEVENT_UINH (HPMEVENTH_UINH << 32)
>> +#define HPMEVENT_VSINH (HPMEVENTH_VSINH << 32)
>> +#define HPMEVENT_VUINH (HPMEVENTH_VUINH << 32)
> These definitions are identical to the rv64 ones, can these be removed
> and can you move the rv64 definitions to be global?
Good catch. Will fix this and the above in v8.
> - Charlie
>
>> +#endif
>> +
>> +#define SISELECT_SSCCFG_BASE 0x40
>>
>> /* mseccfg bits */
>> #define MSECCFG_PMM ENVCFG_PMM
>> @@ -322,6 +347,7 @@
>> #define CSR_SCOUNTEREN 0x106
>> #define CSR_SENVCFG 0x10a
>> #define CSR_SSTATEEN0 0x10c
>> +#define CSR_SCOUNTINHIBIT 0x120
>> #define CSR_SSCRATCH 0x140
>> #define CSR_SEPC 0x141
>> #define CSR_SCAUSE 0x142
>>
>> --
>> 2.53.0-Meta
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply
* Re: [PATCH v2] dt-bindings: clock: Replace bouncing emails
From: Krzysztof Kozlowski @ 2026-06-24 7:31 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Bjorn Andersson, Michael Turquette, Stephen Boyd, Brian Masney,
Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Sylwester Nawrocki, Chanwoo Choi, Peter Griffin, Alim Akhtar,
Barnabas Czeman, Tomasz Figa, linux-arm-msm, linux-clk,
devicetree, linux-kernel, linux-samsung-soc, linux-arm-kernel
In-Reply-To: <20260623073050.36262-2-krzysztof.kozlowski@oss.qualcomm.com>
On Tue, Jun 23, 2026 at 09:30:51AM +0200, Krzysztof Kozlowski wrote:
> Replace permanently bouncing email addresses (550 5.1.1 Recipient address
> rejected) of Adam Skladowski, Chanho Park, Anusha Rao and Sireesh
> Kodali. There are no new messages from them via other email addresses,
> so drop them permanently. Add Alim Akhtar to Samsung ExynosAutov9 SoC
> clocks, because he looks at other Samsung clock hardware and drivers.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
I missed here:
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH 0/2] gpio: fix sleeping-in-atomic in shared-proxy; restore meson non-sleeping
From: Bartosz Golaszewski @ 2026-06-24 7:25 UTC (permalink / raw)
To: Robin Murphy
Cc: Neil Armstrong, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
Diederik de Haas, linux-gpio, linux-arm-kernel, linux-amlogic,
linux-kernel, linux-rockchip, Heiko Stuebner, Marek Szyprowski,
Viacheslav Bocharov, Linus Walleij, Bartosz Golaszewski
In-Reply-To: <112d2563-e650-4881-bba0-335f6a3fcb8a@arm.com>
On Tue, 23 Jun 2026 17:16:44 +0200, Robin Murphy <robin.murphy@arm.com> said:
> On 11/06/2026 9:26 am, Marek Szyprowski wrote:
>> Hi Viachesla,
>>
>> On 10.06.2026 17:32, Viacheslav Bocharov wrote:
>>> gpio-shared-proxy chooses its descriptor lock (mutex vs spinlock) from
>>> the underlying chip's can_sleep, but under that lock it calls config and
>>> direction ops that reach sleeping pinctrl paths. On a controller with
>>> non-sleeping MMIO value ops the lock is a spinlock, so a sleeping call
>>> runs from atomic context:
>>>
...
>>
>> I've checked this patchset with these two reverted and no warning was reported.
>
> If it hadn't already been fixed (...)
>
About that - Viacheslav, do you still plan to submit v2 of this?
Bart
^ permalink raw reply
* [PATCH v6 6/9] media: chips-media: wave6: Improve debugging capabilities
From: Nas Chung @ 2026-06-24 7:20 UTC (permalink / raw)
To: mchehab, hverkuil, robh, krzk+dt, conor+dt, shawnguo, s.hauer
Cc: linux-media, devicetree, linux-kernel, linux-imx,
linux-arm-kernel, jackson.lee, lafley.kim, marek.vasut, Nas Chung,
Ming Qian
In-Reply-To: <20260624072043.238-1-nas.chung@chipsnmedia.com>
Add debugfs entries and trace events to provide detailed
debugging information.
These enhancements help diagnose issues and improve debugging
capabilities for the Wave6 core driver.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Ming Qian <ming.qian@oss.nxp.com>
Tested-by: Marek Vasut <marek.vasut@mailbox.org>
---
.../platform/chips-media/wave6/wave6-trace.h | 289 ++++++++++++++++++
.../chips-media/wave6/wave6-vpu-dbg.c | 177 +++++++++++
.../chips-media/wave6/wave6-vpu-dbg.h | 14 +
3 files changed, 480 insertions(+)
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-trace.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.h
diff --git a/drivers/media/platform/chips-media/wave6/wave6-trace.h b/drivers/media/platform/chips-media/wave6/wave6-trace.h
new file mode 100644
index 000000000000..2c80923e2f29
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/wave6-trace.h
@@ -0,0 +1,289 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * Wave6 series multi-standard codec IP - wave6 driver tracer
+ *
+ * Copyright (C) 2025 CHIPS&MEDIA INC
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM wave6
+
+#if !defined(__WAVE6_TRACE_H__) || defined(TRACE_HEADER_MULTI_READ)
+#define __WAVE6_TRACE_H__
+
+#include <linux/tracepoint.h>
+#include <media/videobuf2-v4l2.h>
+
+DECLARE_EVENT_CLASS(wave6_vpu_register_access,
+ TP_PROTO(struct device *dev, u32 addr, u32 value),
+ TP_ARGS(dev, addr, value),
+ TP_STRUCT__entry(__string(name, dev_name(dev))
+ __field(u32, addr)
+ __field(u32, value)),
+ TP_fast_assign(__assign_str(name);
+ __entry->addr = addr;
+ __entry->value = value;),
+ TP_printk("%s:0x%03x 0x%08x",
+ __get_str(name), __entry->addr, __entry->value));
+
+DEFINE_EVENT(wave6_vpu_register_access, wave6_vpu_writel,
+ TP_PROTO(struct device *dev, u32 addr, u32 value),
+ TP_ARGS(dev, addr, value));
+DEFINE_EVENT(wave6_vpu_register_access, wave6_vpu_readl,
+ TP_PROTO(struct device *dev, u32 addr, u32 value),
+ TP_ARGS(dev, addr, value));
+
+TRACE_EVENT(wave6_vpu_send_command,
+ TP_PROTO(struct vpu_core_device *core, u32 id, u32 std, u32 cmd),
+ TP_ARGS(core, id, std, cmd),
+ TP_STRUCT__entry(__string(name, dev_name(core->dev))
+ __field(u32, id)
+ __field(u32, std)
+ __field(u32, cmd)),
+ TP_fast_assign(__assign_str(name);
+ __entry->id = id;
+ __entry->std = std;
+ __entry->cmd = cmd;),
+ TP_printk("%s: inst id %d, std 0x%x, cmd 0x%x",
+ __get_str(name), __entry->id,
+ __entry->std, __entry->cmd));
+
+TRACE_EVENT(wave6_vpu_irq,
+ TP_PROTO(struct vpu_core_device *core, u32 irq, u32 idc),
+ TP_ARGS(core, irq, idc),
+ TP_STRUCT__entry(__string(name, dev_name(core->dev))
+ __field(u32, irq)
+ __field(u32, idc)),
+ TP_fast_assign(__assign_str(name);
+ __entry->irq = irq;
+ __entry->idc = idc;),
+ TP_printk("%s: irq 0x%x, idc 0x%x",
+ __get_str(name), __entry->irq, __entry->idc));
+
+TRACE_EVENT(wave6_vpu_set_state,
+ TP_PROTO(struct vpu_instance *inst, u32 state),
+ TP_ARGS(inst, state),
+ TP_STRUCT__entry(__string(name, dev_name(inst->dev->dev))
+ __field(u32, id)
+ __string(cur_state, wave6_vpu_instance_state_name(inst->state))
+ __string(nxt_state, wave6_vpu_instance_state_name(state))),
+ TP_fast_assign(__assign_str(name);
+ __entry->id = inst->id;
+ __assign_str(cur_state);
+ __assign_str(nxt_state);),
+ TP_printk("%s: inst[%d] set state %s -> %s",
+ __get_str(name), __entry->id,
+ __get_str(cur_state), __get_str(nxt_state)));
+
+DECLARE_EVENT_CLASS(wave6_vpu_inst_internal,
+ TP_PROTO(struct vpu_instance *inst, bool is_out),
+ TP_ARGS(inst, is_out),
+ TP_STRUCT__entry(__string(name, dev_name(inst->dev->dev))
+ __field(u32, id)
+ __string(type, is_out ? "output" : "capture")
+ __field(u32, pixelformat)
+ __field(u32, width)
+ __field(u32, height)
+ __field(u32, buf_cnt_src)
+ __field(u32, buf_cnt_dst)
+ __field(u32, processed_cnt)
+ __field(u32, error_cnt)),
+ TP_fast_assign(__assign_str(name);
+ __entry->id = inst->id;
+ __assign_str(type);
+ __entry->pixelformat = is_out ? inst->src_fmt.pixelformat :
+ inst->dst_fmt.pixelformat;
+ __entry->width = is_out ? inst->src_fmt.width :
+ inst->dst_fmt.width;
+ __entry->height = is_out ? inst->src_fmt.height :
+ inst->dst_fmt.height;
+ __entry->buf_cnt_src = inst->queued_src_buf_num;
+ __entry->buf_cnt_dst = inst->queued_dst_buf_num;
+ __entry->processed_cnt = inst->processed_buf_num;
+ __entry->error_cnt = inst->error_buf_num;),
+ TP_printk("%s: inst[%d] %s %c%c%c%c %dx%d, input %d, %d, process %d, error %d",
+ __get_str(name), __entry->id, __get_str(type),
+ __entry->pixelformat,
+ __entry->pixelformat >> 8,
+ __entry->pixelformat >> 16,
+ __entry->pixelformat >> 24,
+ __entry->width, __entry->height,
+ __entry->buf_cnt_src, __entry->buf_cnt_dst,
+ __entry->processed_cnt, __entry->error_cnt));
+
+DEFINE_EVENT(wave6_vpu_inst_internal, wave6_vpu_start_streaming,
+ TP_PROTO(struct vpu_instance *inst, bool is_out),
+ TP_ARGS(inst, is_out));
+
+DEFINE_EVENT(wave6_vpu_inst_internal, wave6_vpu_stop_streaming,
+ TP_PROTO(struct vpu_instance *inst, bool is_out),
+ TP_ARGS(inst, is_out));
+
+TRACE_EVENT(wave6_vpu_dec_pic,
+ TP_PROTO(struct vpu_instance *inst, u32 srcidx, u32 size),
+ TP_ARGS(inst, srcidx, size),
+ TP_STRUCT__entry(__string(name, dev_name(inst->dev->dev))
+ __field(u32, id)
+ __field(u32, srcidx)
+ __field(u32, start)
+ __field(u32, size)),
+ TP_fast_assign(__assign_str(name);
+ __entry->id = inst->id;
+ __entry->srcidx = srcidx;
+ __entry->start = inst->codec_info->dec_info.stream_rd_ptr;
+ __entry->size = size;),
+ TP_printk("%s: inst[%d] src[%2d] %8x, %d",
+ __get_str(name), __entry->id,
+ __entry->srcidx, __entry->start, __entry->size));
+
+TRACE_EVENT(wave6_vpu_source_change,
+ TP_PROTO(struct vpu_instance *inst, struct dec_seq_info *info),
+ TP_ARGS(inst, info),
+ TP_STRUCT__entry(__string(name, dev_name(inst->dev->dev))
+ __field(u32, id)
+ __field(u32, width)
+ __field(u32, height)
+ __field(u32, profile)
+ __field(u32, level)
+ __field(u32, tier)
+ __field(u32, min_fb_cnt)
+ __field(u32, disp_delay)
+ __field(u32, quantization)
+ __field(u32, colorspace)
+ __field(u32, xfer_func)
+ __field(u32, ycbcr_enc)),
+ TP_fast_assign(__assign_str(name);
+ __entry->id = inst->id;
+ __entry->width = info->pic_width,
+ __entry->height = info->pic_height,
+ __entry->profile = info->profile,
+ __entry->level = info->level;
+ __entry->tier = info->tier;
+ __entry->min_fb_cnt = info->min_frame_buffer_count;
+ __entry->disp_delay = info->frame_buf_delay;
+ __entry->quantization = inst->quantization;
+ __entry->colorspace = inst->colorspace;
+ __entry->xfer_func = inst->xfer_func;
+ __entry->ycbcr_enc = inst->ycbcr_enc;),
+ TP_printk("%s: inst[%d] %dx%d profile %d %d %d min_fb %d delay %d color %d %d %d %d",
+ __get_str(name), __entry->id,
+ __entry->width, __entry->height,
+ __entry->profile, __entry->level, __entry->tier,
+ __entry->min_fb_cnt, __entry->disp_delay,
+ __entry->quantization, __entry->colorspace,
+ __entry->xfer_func, __entry->ycbcr_enc));
+
+TRACE_EVENT(wave6_vpu_dec_done,
+ TP_PROTO(struct vpu_instance *inst, struct dec_output_info *info),
+ TP_ARGS(inst, info),
+ TP_STRUCT__entry(__string(name, dev_name(inst->dev->dev))
+ __field(u32, id)
+ __field(u32, dec_flag)
+ __field(u32, dec_poc)
+ __field(u32, disp_flag)
+ __field(u32, disp_cnt)
+ __field(u32, rel_cnt)
+ __field(u32, src_ch)
+ __field(u32, eos)
+ __field(u32, error)
+ __field(u32, warn)),
+ TP_fast_assign(__assign_str(name);
+ __entry->id = inst->id;
+ __entry->dec_flag = info->frame_decoded;
+ __entry->dec_poc = info->decoded_poc;
+ __entry->disp_flag = info->frame_display;
+ __entry->disp_cnt = info->disp_frame_num;
+ __entry->rel_cnt = info->release_disp_frame_num;
+ __entry->src_ch = info->notification_flags & DEC_NOTI_FLAG_SEQ_CHANGE;
+ __entry->eos = info->stream_end;
+ __entry->error = info->error_reason;
+ __entry->warn = info->warn_info;),
+ TP_printk("%s: inst[%d] dec %d %d disp %d(%d) rel %d src_ch %d eos %d error 0x%x 0x%x",
+ __get_str(name), __entry->id,
+ __entry->dec_flag, __entry->dec_poc,
+ __entry->disp_flag, __entry->disp_cnt,
+ __entry->rel_cnt,
+ __entry->src_ch, __entry->eos,
+ __entry->error, __entry->warn));
+
+TRACE_EVENT(wave6_vpu_enc_pic,
+ TP_PROTO(struct vpu_instance *inst, struct enc_param *param),
+ TP_ARGS(inst, param),
+ TP_STRUCT__entry(__string(name, dev_name(inst->dev->dev))
+ __field(u32, id)
+ __field(u32, srcidx)
+ __field(u32, buf_y)
+ __field(u32, buf_cb)
+ __field(u32, buf_cr)
+ __field(u32, stride)
+ __field(u32, buf_strm)
+ __field(u32, size_strm)
+ __field(u32, force_type_enable)
+ __field(u32, force_type)
+ __field(u32, end_flag)),
+ TP_fast_assign(__assign_str(name);
+ __entry->id = inst->id;
+ __entry->srcidx = param->src_idx;
+ __entry->buf_y = param->source_frame->buf_y;
+ __entry->buf_cb = param->source_frame->buf_cb;
+ __entry->buf_cr = param->source_frame->buf_cr;
+ __entry->stride = param->source_frame->stride;
+ __entry->buf_strm = param->pic_stream_buffer_addr;
+ __entry->size_strm = param->pic_stream_buffer_size;
+ __entry->force_type_enable = param->force_pic;
+ __entry->force_type = param->force_pic_type;
+ __entry->end_flag = param->src_end;),
+ TP_printk("%s: inst[%d] src[%2d] %8x %8x %8x(%d) dst %8x(%d) force type %d(%d) end %d",
+ __get_str(name), __entry->id, __entry->srcidx,
+ __entry->buf_y, __entry->buf_cb, __entry->buf_cr,
+ __entry->stride, __entry->buf_strm, __entry->size_strm,
+ __entry->force_type_enable, __entry->force_type,
+ __entry->end_flag));
+
+TRACE_EVENT(wave6_vpu_enc_done,
+ TP_PROTO(struct vpu_instance *inst, struct enc_output_info *info),
+ TP_ARGS(inst, info),
+ TP_STRUCT__entry(__string(name, dev_name(inst->dev->dev))
+ __field(u32, id)
+ __field(u32, srcidx)
+ __field(u32, frmidx)
+ __field(u32, size)
+ __field(u32, type)
+ __field(u32, avg_qp)),
+ TP_fast_assign(__assign_str(name);
+ __entry->id = inst->id;
+ __entry->srcidx = info->enc_src_idx;
+ __entry->frmidx = info->recon_frame_index;
+ __entry->size = info->bitstream_size;
+ __entry->type = info->pic_type;
+ __entry->avg_qp = info->avg_ctu_qp;),
+ TP_printk("%s: inst[%d] src %d, frame %d, size %d, type %d, qp %d, eos %d",
+ __get_str(name), __entry->id,
+ __entry->srcidx, __entry->frmidx,
+ __entry->size, __entry->type, __entry->avg_qp,
+ __entry->frmidx == RECON_IDX_FLAG_ENC_END));
+
+TRACE_EVENT(wave6_vpu_s_ctrl,
+ TP_PROTO(struct vpu_instance *inst, struct v4l2_ctrl *ctrl),
+ TP_ARGS(inst, ctrl),
+ TP_STRUCT__entry(__string(name, dev_name(inst->dev->dev))
+ __field(u32, id)
+ __string(ctrl_name, ctrl->name)
+ __field(u32, val)),
+ TP_fast_assign(__assign_str(name);
+ __entry->id = inst->id;
+ __assign_str(ctrl_name);
+ __entry->val = ctrl->val;),
+ TP_printk("%s: inst[%d] %s = %d",
+ __get_str(name), __entry->id,
+ __get_str(ctrl_name), __entry->val));
+
+#endif /* __WAVE6_TRACE_H__ */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE wave6-trace
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.c b/drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.c
new file mode 100644
index 000000000000..99a68fe4f999
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Wave6 series multi-standard codec IP - debug interface
+ *
+ * Copyright (C) 2025 CHIPS&MEDIA INC
+ */
+
+#include <linux/types.h>
+#include <linux/debugfs.h>
+#include "wave6-vpu-core.h"
+#include "wave6-vpu-dbg.h"
+
+static int wave6_vpu_dbg_instance(struct seq_file *s, void *data)
+{
+ struct vpu_instance *inst = s->private;
+ struct vpu_performance_info *perf = &inst->performance;
+ struct vb2_queue *vq;
+ s64 tmp;
+ s64 fps;
+
+ if (!inst->v4l2_fh.m2m_ctx)
+ return 0;
+
+ seq_printf(s, "[%s]\n",
+ inst->type == VPU_INST_TYPE_DEC ? "Decoder" : "Encoder");
+
+ seq_printf(s, "%s : product 0x%x, fw_ver %d.%d.%d(r%d), hw_ver 0x%x\n",
+ dev_name(inst->dev->dev),
+ inst->dev->attr.product_code,
+ FW_VERSION_MAJOR(inst->dev->attr.fw_version),
+ FW_VERSION_MINOR(inst->dev->attr.fw_version),
+ FW_VERSION_REL(inst->dev->attr.fw_version),
+ inst->dev->attr.fw_revision,
+ inst->dev->attr.hw_version);
+
+ seq_printf(s, "state = %s\n",
+ wave6_vpu_instance_state_name(inst->state));
+
+ vq = v4l2_m2m_get_src_vq(inst->v4l2_fh.m2m_ctx);
+ seq_printf(s, "output (%2d, %2d): fmt = %c%c%c%c %d x %d, %d;\n",
+ vb2_is_streaming(vq),
+ vb2_get_num_buffers(vq),
+ inst->src_fmt.pixelformat,
+ inst->src_fmt.pixelformat >> 8,
+ inst->src_fmt.pixelformat >> 16,
+ inst->src_fmt.pixelformat >> 24,
+ inst->src_fmt.width,
+ inst->src_fmt.height,
+ vq->last_buffer_dequeued);
+
+ vq = v4l2_m2m_get_dst_vq(inst->v4l2_fh.m2m_ctx);
+ seq_printf(s, "capture(%2d, %2d): fmt = %c%c%c%c %d x %d, %d;\n",
+ vb2_is_streaming(vq),
+ vb2_get_num_buffers(vq),
+ inst->dst_fmt.pixelformat,
+ inst->dst_fmt.pixelformat >> 8,
+ inst->dst_fmt.pixelformat >> 16,
+ inst->dst_fmt.pixelformat >> 24,
+ inst->dst_fmt.width,
+ inst->dst_fmt.height,
+ vq->last_buffer_dequeued);
+
+ seq_printf(s, "crop: (%d, %d) %d x %d\n",
+ inst->crop.left,
+ inst->crop.top,
+ inst->crop.width,
+ inst->crop.height);
+
+ if (inst->scaler_info.enable)
+ seq_printf(s, "scale: %d x %d\n",
+ inst->scaler_info.width, inst->scaler_info.height);
+
+ seq_printf(s, "queued src %d, dst %d, process %d, sequence %d, error %d, drain %d:%d\n",
+ inst->queued_src_buf_num,
+ inst->queued_dst_buf_num,
+ inst->processed_buf_num,
+ inst->sequence,
+ inst->error_buf_num,
+ inst->v4l2_fh.m2m_ctx->out_q_ctx.buffered,
+ inst->eos);
+
+ seq_puts(s, "fps");
+ tmp = MSEC_PER_SEC * inst->processed_buf_num;
+ if (perf->ts_last > perf->ts_first + NSEC_PER_MSEC) {
+ fps = DIV_ROUND_CLOSEST(tmp, (perf->ts_last - perf->ts_first) / NSEC_PER_MSEC);
+ seq_printf(s, " actual: %lld;", fps);
+ }
+ if (perf->total_sw_time) {
+ fps = DIV_ROUND_CLOSEST(tmp, perf->total_sw_time / NSEC_PER_MSEC);
+ seq_printf(s, " sw: %lld;", fps);
+ }
+ if (perf->total_hw_time) {
+ fps = DIV_ROUND_CLOSEST(tmp, perf->total_hw_time / NSEC_PER_MSEC);
+ seq_printf(s, " hw: %lld", fps);
+ }
+ seq_putc(s, '\n');
+
+ seq_printf(s, "latency(ms) first: %llu.%06llu, max %llu.%06llu, setup %llu.%06llu\n",
+ perf->latency_first / NSEC_PER_MSEC,
+ perf->latency_first % NSEC_PER_MSEC,
+ perf->latency_max / NSEC_PER_MSEC,
+ perf->latency_max % NSEC_PER_MSEC,
+ (perf->ts_first - perf->ts_start) / NSEC_PER_MSEC,
+ (perf->ts_first - perf->ts_start) % NSEC_PER_MSEC);
+
+ seq_printf(s, "process frame time(ms) min: %llu.%06llu, max %llu.%06llu\n",
+ perf->min_process_time / NSEC_PER_MSEC,
+ perf->min_process_time % NSEC_PER_MSEC,
+ perf->max_process_time / NSEC_PER_MSEC,
+ perf->max_process_time % NSEC_PER_MSEC);
+
+ if (inst->type == VPU_INST_TYPE_DEC) {
+ seq_printf(s, "%s order\n",
+ inst->disp_mode == DISP_MODE_DISP_ORDER ? "display" : "decode");
+ } else {
+ struct enc_info *p_enc_info = &inst->codec_info->enc_info;
+ struct enc_codec_param *param = &p_enc_info->open_param.codec_param;
+
+ seq_printf(s, "profile %d, level %d, tier %d\n",
+ param->profile, param->level, param->tier);
+
+ seq_printf(s, "frame_rate %d, idr_period %d, intra_period %d\n",
+ param->frame_rate, param->idr_period, param->intra_period);
+
+ seq_printf(s, "rc %d, mode %d, bitrate %d\n",
+ param->en_rate_control,
+ param->rc_mode,
+ param->bitrate);
+
+ seq_printf(s, "qp %d, i_qp [%d, %d], p_qp [%d, %d], b_qp [%d, %d]\n",
+ param->qp,
+ param->min_qp_i, param->max_qp_i,
+ param->min_qp_p, param->max_qp_p,
+ param->min_qp_b, param->max_qp_b);
+ }
+
+ return 0;
+}
+
+static int wave6_vpu_dbg_open(struct inode *inode, struct file *filp)
+{
+ return single_open(filp, wave6_vpu_dbg_instance, inode->i_private);
+}
+
+static const struct file_operations wave6_vpu_dbg_fops = {
+ .owner = THIS_MODULE,
+ .open = wave6_vpu_dbg_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
+int wave6_vpu_create_dbgfs_file(struct vpu_instance *inst)
+{
+ char name[64];
+
+ if (WARN_ON(!inst || !inst->dev || IS_ERR_OR_NULL(inst->dev->debugfs)))
+ return -EINVAL;
+
+ scnprintf(name, sizeof(name), "instance.%d", inst->id);
+ inst->debugfs = debugfs_create_file((const char *)name,
+ 0444,
+ inst->dev->debugfs,
+ inst,
+ &wave6_vpu_dbg_fops);
+
+ return 0;
+}
+
+void wave6_vpu_remove_dbgfs_file(struct vpu_instance *inst)
+{
+ if (!inst || !inst->debugfs)
+ return;
+
+ debugfs_remove(inst->debugfs);
+ inst->debugfs = NULL;
+}
diff --git a/drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.h b/drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.h
new file mode 100644
index 000000000000..6453eb2de76f
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * Wave6 series multi-standard codec IP - debug interface
+ *
+ * Copyright (C) 2025 CHIPS&MEDIA INC
+ */
+
+#ifndef __WAVE6_VPU_DBG_H__
+#define __WAVE6_VPU_DBG_H__
+
+int wave6_vpu_create_dbgfs_file(struct vpu_instance *inst);
+void wave6_vpu_remove_dbgfs_file(struct vpu_instance *inst);
+
+#endif /* __WAVE6_VPU_DBG_H__ */
--
2.31.1
^ permalink raw reply related
* [PATCH v6 8/9] media: chips-media: wave6: Add Wave6 control driver
From: Nas Chung @ 2026-06-24 7:20 UTC (permalink / raw)
To: mchehab, hverkuil, robh, krzk+dt, conor+dt, shawnguo, s.hauer
Cc: linux-media, devicetree, linux-kernel, linux-imx,
linux-arm-kernel, jackson.lee, lafley.kim, marek.vasut, Nas Chung,
Ming Qian
In-Reply-To: <20260624072043.238-1-nas.chung@chipsnmedia.com>
Add the control driver for the Chips&Media Wave6 video codec IP.
The hardware contains one control register region and four interface
register regions for a shared video processing engine.
This driver handles the control region and manages shared resources such
as firmware loading, firmware memory allocation, and coordination required
by the interface register regions.
It also instantiates and coordinates with the `wave6-core` child devices
for firmware and power state management.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Ming Qian <ming.qian@oss.nxp.com>
Tested-by: Marek Vasut <marek.vasut@mailbox.org>
---
drivers/media/platform/chips-media/Kconfig | 1 +
drivers/media/platform/chips-media/Makefile | 1 +
.../media/platform/chips-media/wave6/Kconfig | 17 +
.../media/platform/chips-media/wave6/Makefile | 17 +
.../platform/chips-media/wave6/wave6-vpu.c | 821 ++++++++++++++++++
.../platform/chips-media/wave6/wave6-vpu.h | 143 +++
6 files changed, 1000 insertions(+)
create mode 100644 drivers/media/platform/chips-media/wave6/Kconfig
create mode 100644 drivers/media/platform/chips-media/wave6/Makefile
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu.h
diff --git a/drivers/media/platform/chips-media/Kconfig b/drivers/media/platform/chips-media/Kconfig
index ad350eb6b1fc..8ef7fc8029a4 100644
--- a/drivers/media/platform/chips-media/Kconfig
+++ b/drivers/media/platform/chips-media/Kconfig
@@ -4,3 +4,4 @@ comment "Chips&Media media platform drivers"
source "drivers/media/platform/chips-media/coda/Kconfig"
source "drivers/media/platform/chips-media/wave5/Kconfig"
+source "drivers/media/platform/chips-media/wave6/Kconfig"
diff --git a/drivers/media/platform/chips-media/Makefile b/drivers/media/platform/chips-media/Makefile
index 6b5d99de8b54..b9a07a91c9d6 100644
--- a/drivers/media/platform/chips-media/Makefile
+++ b/drivers/media/platform/chips-media/Makefile
@@ -2,3 +2,4 @@
obj-y += coda/
obj-y += wave5/
+obj-y += wave6/
diff --git a/drivers/media/platform/chips-media/wave6/Kconfig b/drivers/media/platform/chips-media/wave6/Kconfig
new file mode 100644
index 000000000000..63d79c56c7fc
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config VIDEO_WAVE6_VPU
+ tristate "Chips&Media Wave6 Codec Driver"
+ depends on V4L_MEM2MEM_DRIVERS
+ depends on VIDEO_DEV && OF
+ depends on ARCH_MXC || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ select GENERIC_ALLOCATOR
+ help
+ Chips&Media Wave6 stateful codec driver.
+ The wave6 driver manages shared resources such as firmware memory.
+ The wave6-core driver provides encoding and decoding capabilities
+ for H.264, HEVC, and other video formats.
+ To compile this driver as modules, choose M here: the
+ modules will be called wave6 and wave6-core.
diff --git a/drivers/media/platform/chips-media/wave6/Makefile b/drivers/media/platform/chips-media/wave6/Makefile
new file mode 100644
index 000000000000..06f8ac9bef14
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# tell define_trace.h where to find the trace header
+CFLAGS_wave6-vpu-core.o := -I$(src)
+
+wave6-objs += wave6-vpu.o \
+ wave6-vpu-thermal.o
+obj-$(CONFIG_VIDEO_WAVE6_VPU) += wave6.o
+
+wave6-core-objs += wave6-vpu-core.o \
+ wave6-vpu-v4l2.o \
+ wave6-vpu-dbg.o \
+ wave6-vpuapi.o \
+ wave6-vpu-dec.o \
+ wave6-vpu-enc.o \
+ wave6-hw.o
+obj-$(CONFIG_VIDEO_WAVE6_VPU) += wave6-core.o
diff --git a/drivers/media/platform/chips-media/wave6/wave6-vpu.c b/drivers/media/platform/chips-media/wave6/wave6-vpu.c
new file mode 100644
index 000000000000..c6efc4578183
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/wave6-vpu.c
@@ -0,0 +1,821 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Wave6 series multi-standard codec IP - wave6 driver
+ *
+ * Copyright (C) 2025 CHIPS&MEDIA INC
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/property.h>
+#include <linux/of_irq.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_domain.h>
+#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
+#include <linux/genalloc.h>
+
+#include "wave6-vpuconfig.h"
+#include "wave6-regdefine.h"
+#include "wave6-vpu.h"
+
+static const struct wave6_vpu_resource wave633c_data = {
+ .fw_name = "cnm/wave633c_imx9_codec_fw.bin",
+ /* For HEVC, AVC, 4096x4096, 8bit */
+ .sram_size = 0x14800,
+};
+
+static const struct wave6_vpu_core_resource wave633c_core_data = {
+ .codec_types = WAVE633_CODEC_TYPE,
+ .compatible_fw_version = WAVE633_COMPATIBLE_FW_VERSION,
+};
+
+static const char *wave6_vpu_state_name(enum wave6_vpu_state state)
+{
+ switch (state) {
+ case WAVE6_VPU_STATE_OFF:
+ return "off";
+ case WAVE6_VPU_STATE_PREPARE:
+ return "prepare";
+ case WAVE6_VPU_STATE_ON:
+ return "on";
+ case WAVE6_VPU_STATE_SLEEP:
+ return "sleep";
+ default:
+ return "unknown";
+ }
+}
+
+static bool wave6_vpu_valid_transition(struct wave6_vpu_device *vpu,
+ enum wave6_vpu_state next)
+{
+ switch (vpu->state) {
+ case WAVE6_VPU_STATE_OFF:
+ /* to PREPARE: first boot attempt */
+ /* to ON: already booted before, skipping boot */
+ if (next == WAVE6_VPU_STATE_PREPARE ||
+ next == WAVE6_VPU_STATE_ON)
+ return true;
+ break;
+ case WAVE6_VPU_STATE_PREPARE:
+ /* to OFF: boot failed */
+ /* to ON: boot successful */
+ if (next == WAVE6_VPU_STATE_OFF ||
+ next == WAVE6_VPU_STATE_ON)
+ return true;
+ break;
+ case WAVE6_VPU_STATE_ON:
+ /* to OFF: sleep failed */
+ /* to SLEEP: sleep successful */
+ if (next == WAVE6_VPU_STATE_OFF ||
+ next == WAVE6_VPU_STATE_SLEEP)
+ return true;
+ break;
+ case WAVE6_VPU_STATE_SLEEP:
+ /* to OFF: resume failed */
+ /* to ON: resume successful */
+ if (next == WAVE6_VPU_STATE_OFF ||
+ next == WAVE6_VPU_STATE_ON)
+ return true;
+ break;
+ }
+
+ dev_err(vpu->dev, "invalid transition: %s -> %s\n",
+ wave6_vpu_state_name(vpu->state), wave6_vpu_state_name(next));
+
+ return false;
+}
+
+static void wave6_vpu_set_state(struct wave6_vpu_device *vpu,
+ enum wave6_vpu_state state)
+{
+ if (!wave6_vpu_valid_transition(vpu, state))
+ return;
+
+ dev_dbg(vpu->dev, "set state: %s -> %s\n",
+ wave6_vpu_state_name(vpu->state), wave6_vpu_state_name(state));
+
+ vpu->state = state;
+}
+
+static int wave6_vpu_wait_busy(struct vpu_core_device *core)
+{
+ u32 val;
+
+ return read_poll_timeout(wave6_vdi_readl, val, !val,
+ W6_VPU_POLL_DELAY_US, W6_VPU_POLL_TIMEOUT,
+ false, core->reg_base, W6_VPU_BUSY_STATUS);
+}
+
+static int wave6_vpu_check_result(struct vpu_core_device *core)
+{
+ if (wave6_vdi_readl(core->reg_base, W6_RET_SUCCESS))
+ return 0;
+
+ return wave6_vdi_readl(core->reg_base, W6_RET_FAIL_REASON);
+}
+
+static u32 wave6_vpu_get_code_buf_size(struct wave6_vpu_device *vpu)
+{
+ return min_t(u32, vpu->code_buf.size, W6_MAX_CODE_BUF_SIZE);
+}
+
+static void wave6_vpu_remap_code_buf(struct wave6_vpu_device *vpu)
+{
+ dma_addr_t code_base = vpu->code_buf.dma_addr;
+ u32 i, reg_val;
+
+ for (i = 0; i < wave6_vpu_get_code_buf_size(vpu) / W6_MAX_REMAP_PAGE_SIZE; i++) {
+ reg_val = REMAP_CTRL_ON |
+ REMAP_CTRL_INDEX(i) |
+ REMAP_CTRL_PAGE_SIZE_ON |
+ REMAP_CTRL_PAGE_SIZE(W6_MAX_REMAP_PAGE_SIZE);
+ wave6_vdi_writel(vpu->reg_base, W6_VPU_REMAP_CTRL_GB, reg_val);
+ wave6_vdi_writel(vpu->reg_base, W6_VPU_REMAP_VADDR_GB,
+ i * W6_MAX_REMAP_PAGE_SIZE);
+ wave6_vdi_writel(vpu->reg_base, W6_VPU_REMAP_PADDR_GB,
+ code_base + i * W6_MAX_REMAP_PAGE_SIZE);
+ }
+}
+
+static void wave6_vpu_init_code_buf(struct wave6_vpu_device *vpu)
+{
+ if (vpu->code_buf.size < W6_CODE_BUF_SIZE) {
+ dev_warn(vpu->dev,
+ "code buf size (%zu) is too small\n", vpu->code_buf.size);
+ memset(&vpu->code_buf, 0, sizeof(vpu->code_buf));
+ return;
+ }
+
+ vpu->code_buf.vaddr = devm_memremap(vpu->dev,
+ vpu->code_buf.phys_addr,
+ vpu->code_buf.size,
+ MEMREMAP_WC);
+ if (!vpu->code_buf.vaddr) {
+ memset(&vpu->code_buf, 0, sizeof(vpu->code_buf));
+ return;
+ }
+
+ vpu->code_buf.dma_addr = dma_map_resource(vpu->dev,
+ vpu->code_buf.phys_addr,
+ vpu->code_buf.size,
+ DMA_BIDIRECTIONAL,
+ 0);
+ if (dma_mapping_error(vpu->dev, vpu->code_buf.dma_addr)) {
+ memset(&vpu->code_buf, 0, sizeof(vpu->code_buf));
+ return;
+ }
+}
+
+static void wave6_vpu_allocate_work_buffers(struct wave6_vpu_device *vpu)
+{
+ struct vpu_buf *buf;
+ int i;
+
+ for (i = 0; i < MAX_NUM_INSTANCE; i++) {
+ buf = &vpu->work_buffers[i];
+ buf->size = W637DEC_WORKBUF_SIZE_FOR_CQ;
+
+ if (wave6_vdi_alloc_dma(vpu->dev, buf)) {
+ dev_warn(vpu->dev, "Failed to allocate work_buffers\n");
+ return;
+ }
+
+ vpu->work_buffers_alloc++;
+ }
+}
+
+static void wave6_vpu_free_work_buffers(struct wave6_vpu_device *vpu)
+{
+ int i;
+
+ for (i = 0; i < vpu->work_buffers_alloc; i++)
+ wave6_vdi_free_dma(&vpu->work_buffers[i]);
+
+ vpu->work_buffers_alloc = 0;
+ vpu->work_buffers_avail = 0;
+}
+
+static void wave6_vpu_init_work_buf(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core)
+{
+ int ret;
+
+ lockdep_assert_held(&vpu->lock);
+
+ wave6_vdi_writel(core->reg_base, W6_VPU_BUSY_STATUS, BUSY_STATUS_SET);
+ wave6_vdi_writel(core->reg_base, W6_COMMAND, W6_CMD_INIT_WORK_BUF);
+ wave6_vdi_writel(core->reg_base, W6_VPU_HOST_INT_REQ, HOST_INT_REQ_ON);
+
+ ret = wave6_vpu_wait_busy(core);
+ if (ret) {
+ dev_err(vpu->dev, "init work buf failed\n");
+ return;
+ }
+
+ ret = wave6_vpu_check_result(core);
+ if (ret) {
+ dev_err(vpu->dev, "init work buf failed, reason 0x%x\n", ret);
+ return;
+ }
+
+ vpu->work_buffers_avail = vpu->work_buffers_alloc;
+}
+
+static int wave6_vpu_init_vpu(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core)
+{
+ int ret;
+
+ lockdep_assert_held(&vpu->lock);
+
+ /* try init directly as firmware is running */
+ if (wave6_vdi_readl(core->reg_base, W6_VPU_VCPU_CUR_PC))
+ goto init_done;
+
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_PREPARE);
+
+ wave6_vpu_remap_code_buf(vpu);
+
+ wave6_vdi_writel(core->reg_base, W6_VPU_BUSY_STATUS, BUSY_STATUS_SET);
+ wave6_vdi_writel(core->reg_base, W6_CMD_INIT_VPU_SEC_AXI_BASE_CORE0,
+ vpu->sram_buf.dma_addr);
+ wave6_vdi_writel(core->reg_base, W6_CMD_INIT_VPU_SEC_AXI_SIZE_CORE0,
+ vpu->sram_buf.size);
+ wave6_vdi_writel(vpu->reg_base, W6_COMMAND_GB, W6_CMD_INIT_VPU);
+ wave6_vdi_writel(vpu->reg_base, W6_VPU_REMAP_CORE_START_GB,
+ REMAP_CORE_START_ON);
+
+ ret = wave6_vpu_wait_busy(core);
+ if (ret) {
+ dev_err(vpu->dev, "init vpu timeout\n");
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_OFF);
+ return -EINVAL;
+ }
+
+ ret = wave6_vpu_check_result(core);
+ if (ret) {
+ dev_err(vpu->dev, "init vpu fail, reason 0x%x\n", ret);
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_OFF);
+ return -EIO;
+ }
+
+init_done:
+ wave6_vpu_init_work_buf(vpu, core);
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_ON);
+
+ return 0;
+}
+
+static int wave6_vpu_sleep(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core)
+{
+ int ret;
+
+ lockdep_assert_held(&vpu->lock);
+
+ if (!wave6_vdi_readl(core->reg_base, W6_VPU_VCPU_CUR_PC)) {
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_OFF);
+ return 0;
+ }
+
+ wave6_vdi_writel(core->reg_base, W6_VPU_BUSY_STATUS, BUSY_STATUS_SET);
+ wave6_vdi_writel(core->reg_base, W6_COMMAND, W6_CMD_SLEEP_VPU);
+ wave6_vdi_writel(core->reg_base, W6_VPU_HOST_INT_REQ, HOST_INT_REQ_ON);
+
+ ret = wave6_vpu_wait_busy(core);
+ if (ret) {
+ dev_err(vpu->dev, "sleep vpu timeout\n");
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_OFF);
+ return -EINVAL;
+ }
+
+ ret = wave6_vpu_check_result(core);
+ if (ret) {
+ dev_err(vpu->dev, "sleep vpu fail, reason 0x%x\n", ret);
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_OFF);
+ return -EIO;
+ }
+
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_SLEEP);
+
+ return 0;
+}
+
+static int wave6_vpu_wakeup(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core)
+{
+ int ret;
+
+ lockdep_assert_held(&vpu->lock);
+
+ /* try wakeup directly as firmware is running */
+ if (wave6_vdi_readl(core->reg_base, W6_VPU_VCPU_CUR_PC))
+ goto wakeup_done;
+
+ wave6_vpu_remap_code_buf(vpu);
+
+ wave6_vdi_writel(core->reg_base, W6_VPU_BUSY_STATUS, BUSY_STATUS_SET);
+ wave6_vdi_writel(core->reg_base, W6_CMD_INIT_VPU_SEC_AXI_BASE_CORE0,
+ vpu->sram_buf.dma_addr);
+ wave6_vdi_writel(core->reg_base, W6_CMD_INIT_VPU_SEC_AXI_SIZE_CORE0,
+ vpu->sram_buf.size);
+ wave6_vdi_writel(vpu->reg_base, W6_COMMAND_GB, W6_CMD_WAKEUP_VPU);
+ wave6_vdi_writel(vpu->reg_base, W6_VPU_REMAP_CORE_START_GB,
+ REMAP_CORE_START_ON);
+
+ ret = wave6_vpu_wait_busy(core);
+ if (ret) {
+ dev_err(vpu->dev, "wakeup vpu timeout\n");
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_OFF);
+ return -EINVAL;
+ }
+
+ ret = wave6_vpu_check_result(core);
+ if (ret) {
+ dev_err(vpu->dev, "wakeup vpu fail, reason 0x%x\n", ret);
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_OFF);
+ return -EIO;
+ }
+
+wakeup_done:
+ wave6_vpu_set_state(vpu, WAVE6_VPU_STATE_ON);
+
+ return 0;
+}
+
+static int wave6_vpu_try_boot(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core)
+{
+ u32 product_code;
+ int ret;
+
+ lockdep_assert_held(&vpu->lock);
+
+ if (vpu->state != WAVE6_VPU_STATE_OFF && vpu->state != WAVE6_VPU_STATE_SLEEP)
+ return 0;
+
+ product_code = wave6_vdi_readl(core->reg_base, W6_VPU_RET_PRODUCT_CODE);
+ if (!wave6_is_product_w_series(product_code)) {
+ dev_err(vpu->dev, "unknown product : %08x\n", product_code);
+ return -EINVAL;
+ }
+
+ if (vpu->state == WAVE6_VPU_STATE_SLEEP) {
+ ret = wave6_vpu_wakeup(vpu, core);
+ return ret;
+ }
+
+ ret = wave6_vpu_init_vpu(vpu, core);
+
+ return ret;
+}
+
+static int wave6_vpu_get(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core)
+{
+ int ret;
+
+ if (WARN_ON(!vpu || !core))
+ return -EINVAL;
+
+ guard(mutex)(&vpu->lock);
+
+ if (!vpu->fw_available)
+ return -EINVAL;
+
+ /* Only the first core executes boot; others return */
+ if (atomic_inc_return(&vpu->core_count) > 1)
+ return 0;
+
+ ret = pm_runtime_resume_and_get(vpu->dev);
+ if (ret)
+ goto error_pm;
+
+ ret = wave6_vpu_try_boot(vpu, core);
+ if (ret)
+ goto error_boot;
+
+ return 0;
+
+error_boot:
+ pm_runtime_put_sync(vpu->dev);
+error_pm:
+ atomic_dec(&vpu->core_count);
+
+ return ret;
+}
+
+static void wave6_vpu_put(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core)
+{
+ if (WARN_ON(!vpu || !core))
+ return;
+
+ guard(mutex)(&vpu->lock);
+
+ if (!vpu->fw_available)
+ return;
+
+ /* Only the last core executes sleep; others return */
+ if (atomic_dec_return(&vpu->core_count) > 0)
+ return;
+
+ wave6_vpu_sleep(vpu, core);
+
+ if (!pm_runtime_suspended(vpu->dev))
+ pm_runtime_put_sync(vpu->dev);
+}
+
+static void wave6_vpu_require_work_buffer(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core)
+{
+ struct vpu_buf *vb;
+ u32 size;
+
+ if (WARN_ON(!vpu || !core))
+ return;
+
+ size = wave6_vdi_readl(core->reg_base, W6_CMD_SET_WORK_BUF_SIZE);
+ if (!size)
+ return;
+
+ if (WARN_ON(size > W637DEC_WORKBUF_SIZE_FOR_CQ))
+ goto exit;
+
+ if (WARN_ON(vpu->work_buffers_avail == 0))
+ goto exit;
+
+ vpu->work_buffers_avail--;
+ vb = &vpu->work_buffers[vpu->work_buffers_avail];
+
+ wave6_vdi_writel(core->reg_base, W6_CMD_SET_WORK_BUF_ADDR, vb->daddr);
+
+exit:
+ wave6_vdi_writel(core->reg_base, W6_CMD_SET_WORK_BUF_SIZE, SET_WORK_BUF_SIZE_ACK);
+}
+
+static int wave6_vpu_create_cores(struct wave6_vpu_device *vpu)
+{
+ struct device_node *child;
+ int num_cores = 0;
+
+ for_each_available_child_of_node(vpu->dev->of_node, child) {
+ struct platform_device_info info = {};
+ struct platform_device *pdev;
+ struct resource res[2];
+ int irq;
+
+ if (num_cores >= W6_VPU_MAX_NUM_CORE) {
+ of_node_put(child);
+ break;
+ }
+
+ if (of_address_to_resource(child, 0, &res[0])) {
+ dev_warn(vpu->dev, "%pOF: missing reg property\n", child);
+ continue;
+ }
+
+ irq = of_irq_get(child, 0);
+ if (irq < 0) {
+ dev_warn(vpu->dev, "%pOF: missing interrupts property\n", child);
+ continue;
+ }
+ res[1] = DEFINE_RES_IRQ(irq);
+
+ info.fwnode = of_fwnode_handle(child);
+ info.parent = vpu->dev;
+ info.name = WAVE6_VPU_CORE_PLATFORM_DRIVER_NAME;
+ info.id = num_cores;
+ info.dma_mask = DMA_BIT_MASK(32);
+ info.res = res;
+ info.num_res = ARRAY_SIZE(res);
+ info.data = &wave633c_core_data;
+ info.size_data = sizeof(wave633c_core_data);
+
+ pdev = platform_device_register_full(&info);
+ if (IS_ERR(pdev)) {
+ dev_err(vpu->dev, "Failed to register core %d: %ld\n",
+ num_cores, PTR_ERR(pdev));
+ continue;
+ }
+
+ vpu->core_pdevs[num_cores] = pdev;
+ num_cores++;
+ }
+
+ return num_cores;
+}
+
+static void wave6_vpu_destroy_cores(struct wave6_vpu_device *vpu)
+{
+ int i;
+
+ for (i = 0; i < W6_VPU_MAX_NUM_CORE; i++) {
+ struct platform_device *pdev = vpu->core_pdevs[i];
+
+ if (!pdev)
+ continue;
+
+ platform_device_unregister(pdev);
+ vpu->core_pdevs[i] = NULL;
+ }
+}
+
+static void wave6_vpu_release(struct wave6_vpu_device *vpu)
+{
+ guard(mutex)(&vpu->lock);
+
+ vpu->fw_available = false;
+ wave6_vpu_destroy_cores(vpu);
+ wave6_vpu_free_work_buffers(vpu);
+ if (vpu->sram_pool && vpu->sram_buf.vaddr) {
+ dma_unmap_resource(vpu->dev,
+ vpu->sram_buf.dma_addr,
+ vpu->sram_buf.size,
+ DMA_BIDIRECTIONAL,
+ 0);
+ gen_pool_free(vpu->sram_pool,
+ (unsigned long)vpu->sram_buf.vaddr,
+ vpu->sram_buf.size);
+ }
+ if (vpu->code_buf.dma_addr)
+ dma_unmap_resource(vpu->dev,
+ vpu->code_buf.dma_addr,
+ vpu->code_buf.size,
+ DMA_BIDIRECTIONAL,
+ 0);
+}
+
+static void wave6_vpu_load_firmware(const struct firmware *fw, void *context)
+{
+ struct wave6_vpu_device *vpu = context;
+
+ guard(mutex)(&vpu->lock);
+
+ if (!fw || !fw->data) {
+ dev_err(vpu->dev, "No firmware.\n");
+ return;
+ }
+
+ if (!vpu->fw_available)
+ goto exit;
+
+ if (fw->size + W6_EXTRA_CODE_BUF_SIZE > wave6_vpu_get_code_buf_size(vpu)) {
+ dev_err(vpu->dev, "firmware size (%zd > %zd) is too big\n",
+ fw->size, vpu->code_buf.size);
+ vpu->fw_available = false;
+ goto exit;
+ }
+
+ memcpy(vpu->code_buf.vaddr, fw->data, fw->size);
+
+ vpu->get_vpu = wave6_vpu_get;
+ vpu->put_vpu = wave6_vpu_put;
+ vpu->req_work_buffer = wave6_vpu_require_work_buffer;
+
+ if (!wave6_vpu_create_cores(vpu)) {
+ dev_err(vpu->dev, "Failed to create VPU cores\n");
+ vpu->fw_available = false;
+ }
+
+exit:
+ release_firmware(fw);
+}
+
+static void wave6_vpu_detach_pm_domains(struct wave6_vpu_device *vpu)
+{
+ if (!vpu->num_pm_domains)
+ return;
+
+ for (int i = 0; i < vpu->num_pm_domains; i++) {
+ struct device *pd_dev = vpu->pd_list->pd_devs[i];
+
+ if (!IS_ERR_OR_NULL(pd_dev) && !pm_runtime_suspended(pd_dev))
+ pm_runtime_force_suspend(pd_dev);
+ }
+
+ dev_pm_domain_detach_list(vpu->pd_list);
+ vpu->pd_list = NULL;
+ vpu->num_pm_domains = 0;
+}
+
+static int wave6_vpu_attach_pm_domains(struct wave6_vpu_device *vpu)
+{
+ int ret;
+
+ vpu->num_pm_domains = of_count_phandle_with_args(vpu->dev->of_node,
+ "power-domains",
+ "#power-domain-cells");
+ if (vpu->num_pm_domains < 0) {
+ dev_err(vpu->dev, "No power domains defined for vpu node\n");
+ return vpu->num_pm_domains;
+ }
+
+ if (vpu->num_pm_domains == 1) {
+ /* genpd_dev_pm_attach() attach automatically if count is 1 */
+ vpu->num_pm_domains = 0;
+ return 0;
+ }
+
+ ret = dev_pm_domain_attach_list(vpu->dev, NULL, &vpu->pd_list);
+ if (ret < 0) {
+ dev_err(vpu->dev, "Can't attach pm domains, ret = %d\n", ret);
+ return ret;
+ }
+
+ vpu->num_pm_domains = ret;
+
+ return 0;
+}
+
+static struct device *wave6_vpu_get_performance_dev(struct wave6_vpu_device *vpu)
+{
+ int index;
+
+ if (!vpu->num_pm_domains)
+ return vpu->dev;
+
+ index = of_property_match_string(vpu->dev->of_node,
+ "power-domain-names", "perf");
+ if (index < 0 || index >= vpu->num_pm_domains)
+ return NULL;
+
+ return vpu->pd_list->pd_devs[index];
+}
+
+static int wave6_vpu_probe(struct platform_device *pdev)
+{
+ struct device_node *np;
+ struct wave6_vpu_device *vpu;
+ const struct wave6_vpu_resource *res;
+ int ret;
+
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to set DMA mask: %d\n", ret);
+ return ret;
+ }
+
+ res = device_get_match_data(&pdev->dev);
+ if (!res)
+ return -ENODEV;
+
+ vpu = devm_kzalloc(&pdev->dev, sizeof(*vpu), GFP_KERNEL);
+ if (!vpu)
+ return -ENOMEM;
+
+ ret = devm_mutex_init(&pdev->dev, &vpu->lock);
+ if (ret)
+ return ret;
+
+ atomic_set(&vpu->core_count, 0);
+ dev_set_drvdata(&pdev->dev, vpu);
+ vpu->dev = &pdev->dev;
+ vpu->res = res;
+ vpu->reg_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(vpu->reg_base))
+ return PTR_ERR(vpu->reg_base);
+
+ ret = devm_clk_bulk_get_all(&pdev->dev, &vpu->clks);
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret, "failed to get clocks\n");
+
+ vpu->num_clks = ret;
+
+ ret = wave6_vpu_attach_pm_domains(vpu);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "failed to attach pm domains\n");
+
+ np = of_parse_phandle(pdev->dev.of_node, "memory-region", 0);
+ if (np) {
+ struct resource mem;
+
+ ret = of_address_to_resource(np, 0, &mem);
+ of_node_put(np);
+ if (!ret) {
+ vpu->code_buf.phys_addr = mem.start;
+ vpu->code_buf.size = resource_size(&mem);
+ wave6_vpu_init_code_buf(vpu);
+ } else {
+ dev_warn(&pdev->dev, "memory-region is not available.\n");
+ }
+ }
+
+ vpu->sram_pool = of_gen_pool_get(pdev->dev.of_node, "sram", 0);
+ if (vpu->sram_pool) {
+ vpu->sram_buf.size = vpu->res->sram_size;
+ vpu->sram_buf.vaddr = gen_pool_dma_alloc(vpu->sram_pool,
+ vpu->sram_buf.size,
+ &vpu->sram_buf.phys_addr);
+ if (!vpu->sram_buf.vaddr) {
+ vpu->sram_buf.size = 0;
+ } else {
+ vpu->sram_buf.dma_addr = dma_map_resource(&pdev->dev,
+ vpu->sram_buf.phys_addr,
+ vpu->sram_buf.size,
+ DMA_BIDIRECTIONAL,
+ 0);
+ if (dma_mapping_error(&pdev->dev, vpu->sram_buf.dma_addr)) {
+ gen_pool_free(vpu->sram_pool,
+ (unsigned long)vpu->sram_buf.vaddr,
+ vpu->sram_buf.size);
+ memset(&vpu->sram_buf, 0, sizeof(vpu->sram_buf));
+ }
+ }
+ }
+
+ vpu->thermal.dev = wave6_vpu_get_performance_dev(vpu);
+ if (vpu->thermal.dev) {
+ ret = wave6_vpu_cooling_init(vpu->dev, &vpu->thermal);
+ if (ret)
+ dev_err(&pdev->dev, "failed to initialize thermal cooling, %d\n", ret);
+ }
+
+ wave6_vpu_allocate_work_buffers(vpu);
+
+ pm_runtime_enable(&pdev->dev);
+ vpu->fw_available = true;
+
+ request_module("platform:%s", WAVE6_VPU_CORE_PLATFORM_DRIVER_NAME);
+
+ ret = firmware_request_nowait_nowarn(THIS_MODULE,
+ vpu->res->fw_name,
+ &pdev->dev,
+ GFP_KERNEL,
+ vpu,
+ wave6_vpu_load_firmware);
+ if (ret) {
+ dev_err(&pdev->dev, "request firmware fail, ret = %d\n", ret);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ pm_runtime_disable(&pdev->dev);
+ wave6_vpu_release(vpu);
+ wave6_vpu_detach_pm_domains(vpu);
+
+ return ret;
+}
+
+static void wave6_vpu_remove(struct platform_device *pdev)
+{
+ struct wave6_vpu_device *vpu = dev_get_drvdata(&pdev->dev);
+
+ pm_runtime_disable(vpu->dev);
+ wave6_vpu_release(vpu);
+ wave6_vpu_detach_pm_domains(vpu);
+}
+
+static int wave6_vpu_runtime_suspend(struct device *dev)
+{
+ struct wave6_vpu_device *vpu = dev_get_drvdata(dev);
+
+ clk_bulk_disable_unprepare(vpu->num_clks, vpu->clks);
+
+ return 0;
+}
+
+static int wave6_vpu_runtime_resume(struct device *dev)
+{
+ struct wave6_vpu_device *vpu = dev_get_drvdata(dev);
+
+ return clk_bulk_prepare_enable(vpu->num_clks, vpu->clks);
+}
+
+static const struct dev_pm_ops wave6_vpu_pm_ops = {
+ RUNTIME_PM_OPS(wave6_vpu_runtime_suspend,
+ wave6_vpu_runtime_resume, NULL)
+ SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+};
+
+static const struct of_device_id wave6_vpu_ids[] = {
+ { .compatible = "nxp,imx95-vpu", .data = &wave633c_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, wave6_vpu_ids);
+
+static struct platform_driver wave6_vpu_driver = {
+ .driver = {
+ .name = WAVE6_VPU_PLATFORM_DRIVER_NAME,
+ .of_match_table = wave6_vpu_ids,
+ .pm = pm_ptr(&wave6_vpu_pm_ops),
+ },
+ .probe = wave6_vpu_probe,
+ .remove = wave6_vpu_remove,
+};
+
+module_platform_driver(wave6_vpu_driver);
+MODULE_DESCRIPTION("chips&media Wave6 VPU driver");
+MODULE_AUTHOR("CHIPS&MEDIA INC");
+MODULE_FIRMWARE("cnm/wave633c_imx9_codec_fw.bin");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/media/platform/chips-media/wave6/wave6-vpu.h b/drivers/media/platform/chips-media/wave6/wave6-vpu.h
new file mode 100644
index 000000000000..ec3c9299526b
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/wave6-vpu.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * Wave6 series multi-standard codec IP - wave6 driver
+ *
+ * Copyright (C) 2025 CHIPS&MEDIA INC
+ */
+
+#ifndef __WAVE6_VPU_H__
+#define __WAVE6_VPU_H__
+
+#include <linux/device.h>
+#include "wave6-vpu-thermal.h"
+#include "wave6-vdi.h"
+#include "wave6-vpuapi.h"
+
+#define WAVE6_VPU_PLATFORM_DRIVER_NAME "wave6-vpu"
+#define WAVE6_VPU_CORE_PLATFORM_DRIVER_NAME "wave6-vpu-core"
+
+struct wave6_vpu_device;
+struct vpu_core_device;
+
+/**
+ * enum wave6_vpu_state - VPU states
+ * @WAVE6_VPU_STATE_OFF: VPU is powered off
+ * @WAVE6_VPU_STATE_PREPARE: VPU is booting
+ * @WAVE6_VPU_STATE_ON: VPU is running
+ * @WAVE6_VPU_STATE_SLEEP: VPU is in a sleep mode
+ */
+enum wave6_vpu_state {
+ WAVE6_VPU_STATE_OFF,
+ WAVE6_VPU_STATE_PREPARE,
+ WAVE6_VPU_STATE_ON,
+ WAVE6_VPU_STATE_SLEEP
+};
+
+/**
+ * struct wave6_vpu_dma_buf - VPU buffer from reserved memory or gen_pool
+ * @size: Buffer size
+ * @dma_addr: Mapped address for device access
+ * @vaddr: Kernel virtual address
+ * @phys_addr: Physical address of the reserved memory region or gen_pool
+ *
+ * Represents a buffer allocated from pre-reserved device memory regions or
+ * SRAM via gen_pool_dma_alloc(). Used for code and SRAM buffers only.
+ * Managed by the VPU device.
+ */
+struct wave6_vpu_dma_buf {
+ size_t size;
+ dma_addr_t dma_addr;
+ void *vaddr;
+ phys_addr_t phys_addr;
+};
+
+/**
+ * struct wave6_vpu_resource - VPU device compatible data
+ * @fw_name: Firmware name for the device
+ * @sram_size: Required SRAM size
+ */
+struct wave6_vpu_resource {
+ const char *fw_name;
+ u32 sram_size;
+};
+
+#define WAVE6_IS_ENC BIT(0)
+#define WAVE6_IS_DEC BIT(1)
+
+#define WAVE633_CODEC_TYPE (WAVE6_IS_ENC | WAVE6_IS_DEC)
+#define WAVE633_COMPATIBLE_FW_VERSION 0x2010000
+
+/**
+ * struct wave6_vpu_core_resource - VPU CORE device compatible data
+ * @codec_types: Bitmask of supported codec types
+ * @compatible_fw_version: Firmware version compatible with driver
+ */
+struct wave6_vpu_core_resource {
+ int codec_types;
+ u32 compatible_fw_version;
+};
+
+/**
+ * struct wave6_vpu_device - VPU driver structure
+ * @get_vpu: Function pointer, boot or wake the device
+ * @put_vpu: Function pointer, power off or suspend the device
+ * @req_work_buffer: Function pointer, request allocation of a work buffer
+ * @dev: Platform device pointer
+ * @reg_base: Base address of MMIO registers
+ * @clks: Array of clock handles
+ * @num_clks: Number of entries in @clks
+ * @state: Device state
+ * @lock: Mutex protecting device data, register access
+ * @fw_available: Firmware availability flag
+ * @res: Device compatible data
+ * @sram_pool: Genalloc pool for SRAM allocations
+ * @sram_buf: Optional SRAM buffer
+ * @code_buf: Firmware code buffer
+ * @work_buffers: Array of work buffers
+ * @work_buffers_alloc: Number of allocated work buffers
+ * @work_buffers_avail: Number of available work buffers
+ * @thermal: Thermal cooling device
+ * @core_count: Number of available VPU core devices
+ *
+ * @get_vpu, @put_vpu, @req_work_buffer are called by VPU core devices.
+ *
+ * Buffers such as @sram_buf, @code_buf, and @work_buffers are managed
+ * by the VPU device and accessed exclusively by the firmware.
+ */
+struct wave6_vpu_device {
+ int (*get_vpu)(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core);
+ void (*put_vpu)(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core);
+ void (*req_work_buffer)(struct wave6_vpu_device *vpu,
+ struct vpu_core_device *core);
+ struct device *dev;
+ void __iomem *reg_base;
+ struct clk_bulk_data *clks;
+ int num_clks;
+ enum wave6_vpu_state state;
+ struct mutex lock; /* Protects device data, register access */
+
+ /* Prevents boot or sleep sequence if firmware is unavailable. */
+ bool fw_available;
+
+ const struct wave6_vpu_resource *res;
+ struct gen_pool *sram_pool;
+ struct wave6_vpu_dma_buf sram_buf;
+ struct wave6_vpu_dma_buf code_buf;
+
+ /* Allocates per-instance, used for storing instance-specific data. */
+ struct vpu_buf work_buffers[MAX_NUM_INSTANCE];
+ u32 work_buffers_alloc;
+ u32 work_buffers_avail;
+
+ struct vpu_thermal_cooling thermal;
+ atomic_t core_count;
+
+ int num_pm_domains;
+ struct dev_pm_domain_list *pd_list;
+
+ struct platform_device *core_pdevs[W6_VPU_MAX_NUM_CORE];
+};
+
+#endif /* __WAVE6_VPU_H__ */
--
2.31.1
^ permalink raw reply related
* [PATCH v6 9/9] arm64: dts: freescale: imx95: Add video codec node
From: Nas Chung @ 2026-06-24 7:20 UTC (permalink / raw)
To: mchehab, hverkuil, robh, krzk+dt, conor+dt, shawnguo, s.hauer
Cc: linux-media, devicetree, linux-kernel, linux-imx,
linux-arm-kernel, jackson.lee, lafley.kim, marek.vasut, Nas Chung
In-Reply-To: <20260624072043.238-1-nas.chung@chipsnmedia.com>
Add the Chips and Media wave633 video codec node on IMX95 SoCs.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
---
.../boot/dts/freescale/imx95-19x19-evk.dts | 11 ++++++
arch/arm64/boot/dts/freescale/imx95.dtsi | 36 +++++++++++++++++++
2 files changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 041fd838fabb..7edd1c69966a 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -76,6 +76,11 @@ linux_cma: linux,cma {
linux,cma-default;
reusable;
};
+
+ vpu_boot: memory@a0000000 {
+ reg = <0 0xa0000000 0 0x100000>;
+ no-map;
+ };
};
flexcan1_phy: can-phy0 {
@@ -1142,3 +1147,9 @@ &tpm6 {
pinctrl-0 = <&pinctrl_tpm6>;
status = "okay";
};
+
+&vpu {
+ memory-region = <&vpu_boot>;
+ sram = <&sram1>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 71394871d8dd..f0b2bc2be907 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -2012,6 +2012,42 @@ vpu_blk_ctrl: clock-controller@4c410000 {
assigned-clock-rates = <133333333>, <667000000>, <500000000>;
};
+ vpu: video-codec@4c4c0000 {
+ compatible = "nxp,imx95-vpu";
+ reg = <0x0 0x4c4c0000 0x0 0x10000>;
+ clocks = <&scmi_clk IMX95_CLK_VPU>,
+ <&vpu_blk_ctrl IMX95_CLK_VPUBLK_WAVE>;
+ clock-names = "core", "vpublk";
+ power-domains = <&scmi_devpd IMX95_PD_VPU>,
+ <&scmi_perf IMX95_PERF_VPU>;
+ power-domain-names = "vpu", "perf";
+ #cooling-cells = <2>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ interface@4c480000 {
+ reg = <0x0 0x4c480000 0x0 0x10000>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ interface@4c490000 {
+ reg = <0x0 0x4c490000 0x0 0x10000>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ interface@4c4a0000 {
+ reg = <0x0 0x4c4a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ interface@4c4b0000 {
+ reg = <0x0 0x4c4b0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
jpegdec: jpegdec@4c500000 {
compatible = "nxp,imx95-jpgdec", "nxp,imx8qxp-jpgdec";
reg = <0x0 0x4C500000 0x0 0x00050000>;
--
2.31.1
^ permalink raw reply related
* [PATCH v6 7/9] media: chips-media: wave6: Add Wave6 thermal cooling device
From: Nas Chung @ 2026-06-24 7:20 UTC (permalink / raw)
To: mchehab, hverkuil, robh, krzk+dt, conor+dt, shawnguo, s.hauer
Cc: linux-media, devicetree, linux-kernel, linux-imx,
linux-arm-kernel, jackson.lee, lafley.kim, marek.vasut, Nas Chung,
Ming Qian
In-Reply-To: <20260624072043.238-1-nas.chung@chipsnmedia.com>
Add a thermal cooling device for the Wave6 VPU.
The device operates within the Linux thermal framework,
adjusting the VPU performance state based on thermal conditions.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Ming Qian <ming.qian@oss.nxp.com>
Tested-by: Marek Vasut <marek.vasut@mailbox.org>
---
.../chips-media/wave6/wave6-vpu-thermal.c | 139 ++++++++++++++++++
.../chips-media/wave6/wave6-vpu-thermal.h | 24 +++
2 files changed, 163 insertions(+)
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.h
diff --git a/drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.c b/drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.c
new file mode 100644
index 000000000000..91cd826e8119
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Wave6 series multi-standard codec IP - wave6 thermal cooling interface
+ *
+ * Copyright (C) 2025 CHIPS&MEDIA INC
+ *
+ */
+
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/units.h>
+#include <linux/slab.h>
+#include "wave6-vpu-thermal.h"
+
+static int wave6_vpu_thermal_cooling_update(struct vpu_thermal_cooling *thermal,
+ int state)
+{
+ unsigned long new_clock_rate;
+ int ret;
+
+ if (state > thermal->thermal_max || !thermal->cooling)
+ return 0;
+
+ new_clock_rate = DIV_ROUND_UP(thermal->freq_table[state], HZ_PER_KHZ);
+ dev_dbg(thermal->dev, "receive cooling state: %d, new clock rate %ld\n",
+ state, new_clock_rate);
+
+ ret = dev_pm_genpd_set_performance_state(thermal->dev, new_clock_rate);
+ if (ret && !((ret == -ENODEV) || (ret == -EOPNOTSUPP))) {
+ dev_err(thermal->dev, "failed to set perf to %lu, ret = %d\n",
+ new_clock_rate, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wave6_vpu_cooling_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct vpu_thermal_cooling *thermal = cdev->devdata;
+
+ *state = thermal->thermal_max;
+
+ return 0;
+}
+
+static int wave6_vpu_cooling_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct vpu_thermal_cooling *thermal = cdev->devdata;
+
+ *state = thermal->thermal_event;
+
+ return 0;
+}
+
+static int wave6_vpu_cooling_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ struct vpu_thermal_cooling *thermal = cdev->devdata;
+
+ thermal->thermal_event = state;
+ wave6_vpu_thermal_cooling_update(thermal, state);
+
+ return 0;
+}
+
+static const struct thermal_cooling_device_ops wave6_cooling_ops = {
+ .get_max_state = wave6_vpu_cooling_get_max_state,
+ .get_cur_state = wave6_vpu_cooling_get_cur_state,
+ .set_cur_state = wave6_vpu_cooling_set_cur_state,
+};
+
+int wave6_vpu_cooling_init(struct device *dev, struct vpu_thermal_cooling *thermal)
+{
+ int i;
+ int num_opps;
+ unsigned long freq;
+ int ret = -EINVAL;
+
+ if (WARN_ON(!thermal || !thermal->dev))
+ return -EINVAL;
+
+ num_opps = dev_pm_opp_get_opp_count(thermal->dev);
+ if (num_opps < 0) {
+ dev_err(thermal->dev, "fail to get pm opp count, ret = %d\n", num_opps);
+ return num_opps;
+ }
+ if (num_opps == 0) {
+ dev_err(thermal->dev, "no OPP entries found\n");
+ return -ENODEV;
+ }
+
+ thermal->freq_table = devm_kcalloc(dev, num_opps,
+ sizeof(*thermal->freq_table),
+ GFP_KERNEL);
+ if (!thermal->freq_table) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ for (i = 0, freq = ULONG_MAX; i < num_opps; i++, freq--) {
+ struct dev_pm_opp *opp;
+
+ opp = dev_pm_opp_find_freq_floor(thermal->dev, &freq);
+ if (IS_ERR(opp))
+ break;
+
+ dev_pm_opp_put(opp);
+
+ dev_dbg(thermal->dev, "[%d] = %lu\n", i, freq);
+ if (freq < 100 * HZ_PER_MHZ)
+ break;
+
+ thermal->freq_table[i] = freq;
+ thermal->thermal_max = i;
+ }
+
+ if (!thermal->thermal_max)
+ goto error;
+
+ thermal->thermal_event = 0;
+ thermal->cooling = devm_thermal_of_cooling_device_register(dev,
+ dev->of_node,
+ dev_name(thermal->dev),
+ thermal,
+ &wave6_cooling_ops);
+ if (IS_ERR(thermal->cooling)) {
+ dev_err(thermal->dev, "register cooling device failed\n");
+ ret = PTR_ERR(thermal->cooling);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ return ret;
+}
diff --git a/drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.h b/drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.h
new file mode 100644
index 000000000000..7c5e8aed6ef7
--- /dev/null
+++ b/drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/*
+ * Wave6 series multi-standard codec IP - wave6 thermal cooling interface
+ *
+ * Copyright (C) 2025 CHIPS&MEDIA INC
+ *
+ */
+
+#ifndef __WAVE6_VPU_THERMAL_H__
+#define __WAVE6_VPU_THERMAL_H__
+
+#include <linux/thermal.h>
+
+struct vpu_thermal_cooling {
+ struct device *dev;
+ int thermal_event;
+ int thermal_max;
+ struct thermal_cooling_device *cooling;
+ unsigned long *freq_table;
+};
+
+int wave6_vpu_cooling_init(struct device *dev, struct vpu_thermal_cooling *thermal);
+
+#endif /* __WAVE6_VPU_THERMAL_H__ */
--
2.31.1
^ permalink raw reply related
* [PATCH v6 1/9] media: v4l2-common: Fix P010 format info
From: Nas Chung @ 2026-06-24 7:20 UTC (permalink / raw)
To: mchehab, hverkuil, robh, krzk+dt, conor+dt, shawnguo, s.hauer
Cc: linux-media, devicetree, linux-kernel, linux-imx,
linux-arm-kernel, jackson.lee, lafley.kim, marek.vasut, Nas Chung
In-Reply-To: <20260624072043.238-1-nas.chung@chipsnmedia.com>
V4L2_PIX_FMT_P010 is a 10-bit 4:2:0 semi-planar format, but its
v4l2_format_info() entry described a 4:2:2 layout with a half-width
chroma plane. Correct bpp and vdiv to match P010's real layout,
consistent with the other semi-planar formats.
Fixes: 5374d8fb75f3 ("media: Add P010 video format")
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
---
drivers/media/v4l2-core/v4l2-common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
index 65db7340ad38..4de8aa3ef7d2 100644
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -323,7 +323,7 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
{ .format = V4L2_PIX_FMT_NV20, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 1 },
{ .format = V4L2_PIX_FMT_NV24, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 },
{ .format = V4L2_PIX_FMT_NV42, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 },
- { .format = V4L2_PIX_FMT_P010, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 2, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 },
+ { .format = V4L2_PIX_FMT_P010, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 2, 4, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 },
{ .format = V4L2_PIX_FMT_P012, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 2, 4, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 },
{ .format = V4L2_PIX_FMT_YUV410, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 4, .vdiv = 4 },
--
2.31.1
^ permalink raw reply related
* [PATCH v6 2/9] dt-bindings: media: nxp: Add Wave6 video codec device
From: Nas Chung @ 2026-06-24 7:20 UTC (permalink / raw)
To: mchehab, hverkuil, robh, krzk+dt, conor+dt, shawnguo, s.hauer
Cc: linux-media, devicetree, linux-kernel, linux-imx,
linux-arm-kernel, jackson.lee, lafley.kim, marek.vasut, Nas Chung
In-Reply-To: <20260624072043.238-1-nas.chung@chipsnmedia.com>
Add documentation for the Chips&Media Wave6 video codec on NXP i.MX SoCs.
The hardware contains one control register region and four interface
register regions for a shared video processing engine. The control region
manages shared resources such as firmware memory, while each interface
region has its own MMIO range and interrupt.
The control region and each interface region are distinct DMA requesters
and can be associated with separate IOMMU stream IDs. Represent the
control region as the parent node and the interface register regions as
child nodes to describe these resources.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
---
.../bindings/media/nxp,imx95-vpu.yaml | 163 ++++++++++++++++++
MAINTAINERS | 7 +
2 files changed, 170 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/nxp,imx95-vpu.yaml
diff --git a/Documentation/devicetree/bindings/media/nxp,imx95-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx95-vpu.yaml
new file mode 100644
index 000000000000..9a5ca53e15a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx95-vpu.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx95-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chips&Media Wave6 Series multi-standard codec IP on NXP i.MX SoCs
+
+maintainers:
+ - Nas Chung <nas.chung@chipsnmedia.com>
+ - Jackson Lee <jackson.lee@chipsnmedia.com>
+
+description:
+ The Chips&Media Wave6 codec IP is a multi-standard video encoder/decoder.
+ On NXP i.MX SoCs, the Wave6 codec IP exposes one control register region and
+ four interface register regions for a shared video processing engine.
+ The parent node describes the control region, which has its own MMIO range and
+ manages shared resources such as firmware memory. The child nodes describe the
+ interface register regions. Each interface region has its own MMIO range and
+ interrupt.
+ The control region and the interface regions are distinct DMA requesters.
+ The control region and each interface region can be associated with separate
+ IOMMU stream IDs, allowing DMA isolation between them.
+
+properties:
+ compatible:
+ enum:
+ - nxp,imx95-vpu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: VPU core clock
+ - description: VPU associated block clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: vpublk
+
+ power-domains:
+ items:
+ - description: Main VPU power domain
+ - description: Performance power domain
+
+ power-domain-names:
+ items:
+ - const: vpu
+ - const: perf
+
+ memory-region:
+ maxItems: 1
+
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the SRAM node used to store reference data, reducing DMA
+ memory bandwidth.
+
+ iommus:
+ maxItems: 1
+
+ "#cooling-cells":
+ const: 2
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges: true
+
+patternProperties:
+ "^interface@[0-9a-f]+$":
+ type: object
+ description:
+ An interface register region within the Chips&Media Wave6 codec IP.
+ Each region has its own MMIO range and interrupt and can be associated
+ with a separate IOMMU stream ID for DMA isolation.
+ additionalProperties: false
+
+ properties:
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ required:
+ - reg
+ - interrupts
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+ - power-domain-names
+ - memory-region
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/nxp,imx95-clock.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ video-codec@4c4c0000 {
+ compatible = "nxp,imx95-vpu";
+ reg = <0x0 0x4c4c0000 0x0 0x10000>;
+ clocks = <&scmi_clk 115>,
+ <&vpu_blk_ctrl IMX95_CLK_VPUBLK_WAVE>;
+ clock-names = "core", "vpublk";
+ power-domains = <&scmi_devpd 21>,
+ <&scmi_perf 10>;
+ power-domain-names = "vpu", "perf";
+ memory-region = <&vpu_boot>;
+ sram = <&sram1>;
+ iommus = <&smmu 0x32>;
+ #cooling-cells = <2>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ interface@4c480000 {
+ reg = <0x0 0x4c480000 0x0 0x10000>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&smmu 0x33>;
+ };
+
+ interface@4c490000 {
+ reg = <0x0 0x4c490000 0x0 0x10000>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&smmu 0x34>;
+ };
+
+ interface@4c4a0000 {
+ reg = <0x0 0x4c4a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&smmu 0x35>;
+ };
+
+ interface@4c4b0000 {
+ reg = <0x0 0x4c4b0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&smmu 0x36>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index efbf808063e5..77ea3a1a966b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -28688,6 +28688,13 @@ S: Maintained
F: Documentation/devicetree/bindings/media/cnm,wave521c.yaml
F: drivers/media/platform/chips-media/wave5/
+WAVE6 VPU CODEC DRIVER
+M: Nas Chung <nas.chung@chipsnmedia.com>
+M: Jackson Lee <jackson.lee@chipsnmedia.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/media/nxp,imx95-vpu.yaml
+
WHISKEYCOVE PMIC GPIO DRIVER
M: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
L: linux-gpio@vger.kernel.org
--
2.31.1
^ permalink raw reply related
* [PATCH v6 0/9] Add support for Wave6 video codec driver
From: Nas Chung @ 2026-06-24 7:20 UTC (permalink / raw)
To: mchehab, hverkuil, robh, krzk+dt, conor+dt, shawnguo, s.hauer
Cc: linux-media, devicetree, linux-kernel, linux-imx,
linux-arm-kernel, jackson.lee, lafley.kim, marek.vasut, Nas Chung
This patch series introduces support for the Chips&Media Wave6 video
codec IP, a completely different hardware architecture compared to Wave5.
The wave6 driver is a M2M stateful encoder/decoder driver.
It supports various video formats, including H.264 and H.265, for both encoding
and decoding.
While other versions of the Wave6 IP may support VP9 decoding and AV1 decoding
and encoding those formats are not implemented or validated in this driver at
this time.
On NXP i.MX SoCs, the Wave6 hardware exposes one control register region and
four interface register regions for one shared video processing engine.
VPU Control region, Manages shared resources such as firmware memory.
VPU Core region, Provides encoding and decoding capabilities.
The control and interface regions are distinct DMA requesters and can be
associated with separate IOMMU stream IDs, allowing DMA isolation between them.
The firmware tested by this driver has been upstreamed in linux-firmware:
- Path: cnm/wave633c_imx9_codec_fw.bin
This driver has been tested with GStreamer on:
- NXP i.MX95 board
- pre-silicon FPGA environment
Test results for decoder fluster with -j2 option:
- JVT-AVC_V1, Ran 77/135 tests successfully in 24.180 secs
- JVT-FR-EXT, Ran 25/69 tests successfully in 11.157 secs
- JCT-VC-HEVC_V1, Ran 132/147 tests successfully in 45.534 secs
- All failures are due to unsupported hardware features:
-- 10bit, Resolutions higher than 4K, FMO, MBAFF
-- Extended profile, Field encoding and High422 sreams.
Test results for v4l2-compliance:
v4l2-compliance 1.31.0-5386, 64 bits, 64-bit time_t
v4l2-compliance SHA: 48316b8a20aa 2025-08-12 12:44:56
Compliance test for wave6-dec device /dev/video0:
fail: v4l2-test-controls.cpp(1204): !have_source_change || !have_eos
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
Total for wave6-dec device /dev/video0: 48, Succeeded: 47, Failed: 1, Warnings: 0
Compliance test for wave6-enc device /dev/video1:
fail: v4l2-test-controls.cpp(1193): node->codec_mask & STATEFUL_ENCODER
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
Total for wave6-enc device /dev/video1: 48, Succeeded: 47, Failed: 1, Warnings: 0
Note: the failures are all related with the eos event.
Changelog:
v6:
- Fixed the existing P010 format_info entry
- Moved all encoder parameter validation from the HW layer into the V4L2 layer
- Removed redundant HW-abstraction wrappers from the VPU API layer
- Computed frame stride and sizeimage in the V4L2 layer
- Added explicit instance lifecycle helpers to the core driver
- Enabled the VPU only on the tested imx95-19x19-evk board
RFC v5:
- Move all shared resources to the parent node
- Drop child compatible and use data-only interface child nodes
- Update the VPU driver to create child devices and load the core driver
v4:
- Fixed build issues reported by CI tools
- Updated commit messages to use imperative mood
- Avoided using the same name for both nodes and labels in devicetree
- Removed unused labels from YAML examples
- Added description for child(vpu-core) node
- Added iommus property to both parent(vpu) and child(vpu-core) nodes
- Updated probe() functions to use dev_err_probe() when returning -EPROBE_DEFER
- Added wave6_vpu prefix to trace functions
- Updated HEVC decoder profile control to report MAIN_STILL profile
- Fixed bug in multiple instance creation by pre-allocating work buffer
- Fixed interrupt handling by checking INSTANCE_INFO register and instance list
v3:
- Removed ambiguous SUPPORT_FOLLOWER feature
- Used WARN_ON() for unexpected programming errors
- Split thermal device code into wave6-vpu-thermal.c/h
- Dropped wave6_cooling_disable module parameter
- Replaced mutex_lock() with guard()
- Added lockdep_assert_held() to clarify locking regions
- Removed exported function due to dual-license and used function pointer
- Added documentation and validation for state transitions
- Added documentation for device structures
- Added patch to enable VPU device in imx95 DTS
- Updated DT bindings and driver to align with parent(vpu) and child(vpu-core)
- Replaced magic numbers with mask and offset macros when accessing registers
- Placed goto statements after an empty line
- Printed HW info (e.g. product_code) via dev_dbg() for debugging
- Replaced wave6_vpu_dec_give_command() with dedicated functions
v2:
- Refined DT bindings to better represent the hardware
- Reworked driver to align with the parent(VPU) and child(CTRL, CORE)
- Fixed build issues reported by CI tools (Smatch, Sparse, TRACE)
- Improved commit messages with clearer descriptions
- Added kernel-doc for exported functions
- Removed redundant print statements and unused code
- Reordered patches to prevent build failures
Nas Chung (9):
media: v4l2-common: Fix P010 format info
dt-bindings: media: nxp: Add Wave6 video codec device
media: chips-media: wave6: Add Wave6 VPU interface
media: chips-media: wave6: Add v4l2 m2m driver support
media: chips-media: wave6: Add Wave6 core driver
media: chips-media: wave6: Improve debugging capabilities
media: chips-media: wave6: Add Wave6 thermal cooling device
media: chips-media: wave6: Add Wave6 control driver
arm64: dts: freescale: imx95: Add video codec node
.../bindings/media/nxp,imx95-vpu.yaml | 163 +
MAINTAINERS | 8 +
.../boot/dts/freescale/imx95-19x19-evk.dts | 11 +
arch/arm64/boot/dts/freescale/imx95.dtsi | 36 +
drivers/media/platform/chips-media/Kconfig | 1 +
drivers/media/platform/chips-media/Makefile | 1 +
.../media/platform/chips-media/wave6/Kconfig | 17 +
.../media/platform/chips-media/wave6/Makefile | 17 +
.../platform/chips-media/wave6/wave6-hw.c | 2086 +++++++++++++
.../platform/chips-media/wave6/wave6-hw.h | 56 +
.../chips-media/wave6/wave6-regdefine.h | 647 ++++
.../platform/chips-media/wave6/wave6-trace.h | 289 ++
.../platform/chips-media/wave6/wave6-vdi.h | 92 +
.../chips-media/wave6/wave6-vpu-core.c | 437 +++
.../chips-media/wave6/wave6-vpu-core.h | 126 +
.../chips-media/wave6/wave6-vpu-dbg.c | 177 ++
.../chips-media/wave6/wave6-vpu-dbg.h | 14 +
.../chips-media/wave6/wave6-vpu-dec.c | 1831 +++++++++++
.../chips-media/wave6/wave6-vpu-enc.c | 2758 +++++++++++++++++
.../chips-media/wave6/wave6-vpu-thermal.c | 139 +
.../chips-media/wave6/wave6-vpu-thermal.h | 24 +
.../chips-media/wave6/wave6-vpu-v4l2.c | 516 +++
.../platform/chips-media/wave6/wave6-vpu.c | 821 +++++
.../platform/chips-media/wave6/wave6-vpu.h | 143 +
.../platform/chips-media/wave6/wave6-vpuapi.c | 343 ++
.../platform/chips-media/wave6/wave6-vpuapi.h | 1005 ++++++
.../chips-media/wave6/wave6-vpuconfig.h | 72 +
.../chips-media/wave6/wave6-vpuerror.h | 262 ++
drivers/media/v4l2-core/v4l2-common.c | 2 +-
29 files changed, 12093 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/media/nxp,imx95-vpu.yaml
create mode 100644 drivers/media/platform/chips-media/wave6/Kconfig
create mode 100644 drivers/media/platform/chips-media/wave6/Makefile
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-hw.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-hw.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-regdefine.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-trace.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vdi.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-core.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-core.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-dbg.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-dec.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-enc.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-thermal.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu-v4l2.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpu.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpuapi.c
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpuapi.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpuconfig.h
create mode 100644 drivers/media/platform/chips-media/wave6/wave6-vpuerror.h
--
2.31.1
^ permalink raw reply
* Re: [PATCH v3 6/7] ARM: dts: aspeed: g6: Change vuart compatible string for ast2600
From: Krzysztof Kozlowski @ 2026-06-24 7:19 UTC (permalink / raw)
To: Grégoire Layet
Cc: joel, andrew, lkundrak, devicetree, gregkh, jirislaby, robh,
krzk+dt, conor+dt, andrew, jacky_chou, yh_chung, ninad,
anirudhsriniv, linux-serial, linux-aspeed, linux-arm-kernel,
linux-kernel
In-Reply-To: <30aedaa9ffd5ba2d763d8802a07b77ef2d5bfcf0.1782224060.git.gregoire.layet@9elements.com>
On Tue, Jun 23, 2026 at 02:25:44PM +0000, Grégoire Layet wrote:
> Use the ast2600 compatible string.
> This makes it more precise and enables specific ast2600 properties.
> Still use the ast2500 compatible string as a fallback.
>
> Signed-off-by: Grégoire Layet <gregoire.layet@9elements.com>
> ---
> arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> index 56bb3b0444f7..7c02633f2bd6 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
> @@ -707,7 +707,7 @@ emmc: sdhci@1e750100 {
> };
>
> vuart1: serial@1e787000 {
> - compatible = "aspeed,ast2500-vuart";
> + compatible = "aspeed,ast2600-vuart", "aspeed,ast2500-vuart";
Please start testing your patches. This for sure fails tests.
It does not look like you tested the DTS against bindings. Please run
'make dtbs_check W=1' (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Maybe you need to update your dtschema and yamllint. Don't rely on
distro packages for dtschema and be sure you are using the latest
released dtschema.
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v3 1/7] dt-bindings: serial: 8250: aspeed: add compatible string for ast2600
From: Krzysztof Kozlowski @ 2026-06-24 7:15 UTC (permalink / raw)
To: Grégoire Layet
Cc: joel, andrew, lkundrak, devicetree, gregkh, jirislaby, robh,
krzk+dt, conor+dt, andrew, jacky_chou, yh_chung, ninad,
anirudhsriniv, linux-serial, linux-aspeed, linux-arm-kernel,
linux-kernel
In-Reply-To: <80d983887dfdfc7e70a6db95f8cb95b7312f3044.1782224059.git.gregoire.layet@9elements.com>
On Tue, Jun 23, 2026 at 02:25:39PM +0000, Grégoire Layet wrote:
> The ast2600 was using the ast2500 vuart compatible string.
> This change makes it possible to have ast2600-specific properties.
>
> Signed-off-by: Grégoire Layet <gregoire.layet@9elements.com>
Do not attach (thread) your patchsets to some other threads (unrelated
or older versions). This buries them deep in the mailbox and might
interfere with applying entire sets. See also:
https://elixir.bootlin.com/linux/v6.16-rc2/source/Documentation/process/submitting-patches.rst#L830
> ---
> .../devicetree/bindings/serial/8250.yaml | 20 +++++++++++--------
> 1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
> index bb7b9c87a807..3cbd0f532e15 100644
> --- a/Documentation/devicetree/bindings/serial/8250.yaml
> +++ b/Documentation/devicetree/bindings/serial/8250.yaml
> @@ -23,7 +23,9 @@ allOf:
> then:
> properties:
> compatible:
> - const: aspeed,ast2500-vuart
> + anyOf:
This should be oneOf (by convention and actually more accurate meaning).
> + - const: aspeed,ast2500-vuart
> + - const: aspeed,ast2600-vuart
> - if:
> properties:
> compatible:
> @@ -287,17 +289,19 @@ properties:
> aspeed,sirq-polarity-sense:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> description: |
> - Phandle to aspeed,ast2500-scu compatible syscon alongside register
> - offset and bit number to identify how the SIRQ polarity should be
> - configured. One possible data source is the LPC/eSPI mode bit. Only
> - applicable to aspeed,ast2500-vuart.
> + Phandle to aspeed,ast2500-scu or aspeed,ast2600-scu compatible syscon
> + alongside register offset and bit number to identify how the SIRQ
> + polarity should be configured. One possible data source is the LPC/eSPI
> + mode bit. Only applicable to aspeed,ast2500-vuart and
> + aspeed,ast2600-vuart.
> deprecated: true
>
> aspeed,lpc-io-reg:
> $ref: /schemas/types.yaml#/definitions/uint32-array
> maxItems: 1
> description: |
> - The VUART LPC address. Only applicable to aspeed,ast2500-vuart.
> + The VUART LPC address. Only applicable to aspeed,ast2500-vuart and
> + aspeed,ast2600-vuart.
>
> aspeed,lpc-interrupts:
> $ref: /schemas/types.yaml#/definitions/uint32-array
> @@ -305,8 +309,8 @@ properties:
> maxItems: 2
> description: |
> A 2-cell property describing the VUART SIRQ number and SIRQ
> - polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH). Only
> - applicable to aspeed,ast2500-vuart.
> + polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH). Only
> + applicable to aspeed,ast2500-vuart and aspeed,ast2600-vuart.
>
More important, where is documenting of the actual compatible?
Best regards,
Krzysztof
^ permalink raw reply
* RE: [PATCH V2 1/8] PCI: imx6: Add skip_pwrctrl_off flag support
From: Sherry Sun @ 2026-06-24 7:09 UTC (permalink / raw)
To: Frank Li (OSS), Sherry Sun (OSS)
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
Frank Li, s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, Amitkumar Karwar, Neeraj Sanjay Kale,
marcel@holtmann.org, luiz.dentz@gmail.com, Hongxing Zhu,
l.stach@pengutronix.de, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, bhelgaas@google.com,
brgl@kernel.org, imx@lists.linux.dev, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
linux-pm@vger.kernel.org
In-Reply-To: <ajqZBM6IkbDLiVu2@SMW015318>
> Subject: Re: [PATCH V2 1/8] PCI: imx6: Add skip_pwrctrl_off flag support
>
> On Tue, Jun 23, 2026 at 11:07:28AM +0800, Sherry Sun (OSS) wrote:
> > From: Sherry Sun <sherry.sun@nxp.com>
> >
> > Use dw_pcie_rp::skip_pwrctrl_off to avoid powering off devices during
> > suspend to preserve wakeup capability of the devices and also not to
> > power on the devices in the init path.
> > This allows controller power-off to be skipped when some devices(e.g.
> > M.2 cards key E without auxiliary power) required to support PCIe L2
> > link state and wake-up mechanisms.
> >
> > Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
> > ---
> > drivers/pci/controller/dwc/pci-imx6.c | 36
> > +++++++++++++++++----------
> > 1 file changed, 23 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index 0fa716d1ed75..ff5a9565dbbf 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -1382,16 +1382,20 @@ static int imx_pcie_host_init(struct dw_pcie_rp
> *pp)
> > }
> > }
> >
> > - ret = pci_pwrctrl_create_devices(dev);
> > - if (ret) {
> > - dev_err(dev, "failed to create pwrctrl devices\n");
> > - goto err_reg_disable;
> > + if (!pci->suspended) {
> > + ret = pci_pwrctrl_create_devices(dev);
>
> Is possible move pci_pwrctrl_create_devices() of pci_pwrctrl_create_devices
>
> and call it direct at probe() function, like other regulator_get function.
>
Hi Frank,
That makes sense. However, if we move pci_pwrctrl_create_devices () to
probe(), we may need to add the following goto err_pwrctrl_destroy path
in imx_pcie_probe() to properly handle errors from
pci_pwrctrl_power_on_devices(), is that acceptable?
@@ -1960,11 +1949,15 @@ static int imx_pcie_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = pci_pwrctrl_create_devices(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to create pwrctrl devices\n");
+
pci->use_parent_dt_ranges = true;
if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
ret = imx_add_pcie_ep(imx_pcie, pdev);
if (ret < 0)
- return ret;
+ goto err_pwrctrl_destroy;
/*
* FIXME: Only single Device (EPF) is supported due to the
@@ -1979,7 +1972,7 @@ static int imx_pcie_probe(struct platform_device *pdev)
pci->pp.use_atu_msg = true;
ret = dw_pcie_host_init(&pci->pp);
if (ret < 0)
- return ret;
+ goto err_pwrctrl_destroy;
if (pci_msi_enabled()) {
u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
@@ -1991,6 +1984,11 @@ static int imx_pcie_probe(struct platform_device *pdev)
}
return 0;
+
+err_pwrctrl_destroy:
+ if (ret != -EPROBE_DEFER)
+ pci_pwrctrl_destroy_devices(dev);
+ return ret;
}
Best Regards
Sherry
>
> > + if (ret) {
> > + dev_err(dev, "failed to create pwrctrl devices\n");
> > + goto err_reg_disable;
> > + }
> > }
> >
> > - ret = pci_pwrctrl_power_on_devices(dev);
> > - if (ret) {
> > - dev_err(dev, "failed to power on pwrctrl devices\n");
> > - goto err_pwrctrl_destroy;
> > + if (!pp->skip_pwrctrl_off) {
> > + ret = pci_pwrctrl_power_on_devices(dev);
> > + if (ret) {
> > + dev_err(dev, "failed to power on pwrctrl devices\n");
> > + goto err_pwrctrl_destroy;
> > + }
> > }
> >
> > ret = imx_pcie_clk_enable(imx_pcie); @@ -1460,9 +1464,10 @@
> static
> > int imx_pcie_host_init(struct dw_pcie_rp *pp)
> > err_clk_disable:
> > imx_pcie_clk_disable(imx_pcie);
> > err_pwrctrl_power_off:
> > - pci_pwrctrl_power_off_devices(dev);
> > + if (!pp->skip_pwrctrl_off)
> > + pci_pwrctrl_power_off_devices(dev);
> > err_pwrctrl_destroy:
> > - if (ret != -EPROBE_DEFER)
> > + if (ret != -EPROBE_DEFER && !pci->suspended)
> > pci_pwrctrl_destroy_devices(dev);
> > err_reg_disable:
> > if (imx_pcie->vpcie)
> > @@ -1482,7 +1487,8 @@ static void imx_pcie_host_exit(struct dw_pcie_rp
> *pp)
> > }
> > imx_pcie_clk_disable(imx_pcie);
> >
> > - pci_pwrctrl_power_off_devices(pci->dev);
> > + if (!pci->pp.skip_pwrctrl_off)
> > + pci_pwrctrl_power_off_devices(pci->dev);
> > if (imx_pcie->vpcie)
> > regulator_disable(imx_pcie->vpcie);
> > }
> > @@ -1990,12 +1996,16 @@ static int imx_pcie_probe(struct
> > platform_device *pdev) static void imx_pcie_shutdown(struct
> > platform_device *pdev) {
> > struct imx_pcie *imx_pcie = platform_get_drvdata(pdev);
> > + struct dw_pcie *pci = imx_pcie->pci;
> > + struct dw_pcie_rp *pp = &pci->pp;
> >
> > /* bring down link, so bootloader gets clean state in case of reboot */
> > imx_pcie_assert_core_reset(imx_pcie);
> > imx_pcie_assert_perst(imx_pcie, true);
> > - pci_pwrctrl_power_off_devices(&pdev->dev);
> > - pci_pwrctrl_destroy_devices(&pdev->dev);
> > + if (!pp->skip_pwrctrl_off)
> > + pci_pwrctrl_power_off_devices(&pdev->dev);
> > + if (!pci->suspended)
> > + pci_pwrctrl_destroy_devices(&pdev->dev);
> > }
> >
> > static const struct imx_pcie_drvdata drvdata[] = {
> > --
> > 2.50.1
> >
> >
^ permalink raw reply
* Re: [RFC PATCH] irqchip/gic-v3-its: enable dynamic MSI-X allocation
From: Marc Zyngier @ 2026-06-24 7:07 UTC (permalink / raw)
To: Jinqian Yang
Cc: lpieralisi, tglx, alex, linux-kernel, linux-arm-kernel,
liuyonglong, wangzhou1, linuxarm
In-Reply-To: <20260624025345.458387-1-yangjinqian1@huawei.com>
On Wed, 24 Jun 2026 03:53:45 +0100,
Jinqian Yang <yangjinqian1@huawei.com> wrote:
>
> On ARM64 platforms with GICv3 ITS, VFIO PCI passthrough currently
> cannot dynamically allocate MSI-X vectors after MSI-X has been
> enabled. When QEMU needs to extend the vector range, it must
> disable MSI-X, free all interrupts, then re-enable with a larger
> allocation. This creates an interrupt loss window for already-active
> vectors.
>
> Consider HNS3 with RoCE: NIC and RDMA share one PCI device and
> ITS DeviceID, with MSI-X vectors partitioned as NIC (lower range)
> then RoCE (starting at base_vector = num_nic_msi). In VFIO
> passthrough, loading hns_roce after hns3 forces QEMU to tear down
> all interrupts before re-allocating the larger range. During this
> process, NIC interrupts may be lost. Testing confirmed that this
> occasionally occurs, causing the network port reset to fail.
Well, that's what you get for not exposing differentiated functions.
Eventually, you face the reality that this is a poor design.
>
> ITS_MSI_FLAGS_SUPPORTED lacks MSI_FLAG_PCI_MSIX_ALLOC_DYN, causing
> pci_msix_can_alloc_dyn() to return false. VFIO then sets
> has_dyn_msix=false and never clears VFIO_IRQ_INFO_NORESIZE for
> MSI-X, keeping the old "disable and reallocate" behavior.
>
> The essential prerequisite for enabling this flag is the fix to
> msi_prepare() call timing (commit 1396e89e09f0 ("genirq/msi: Move
> prepare() call to per-device allocation")): msi_prepare() is
> now called once at per-device domain creation with hwsize, so ITS
> creates an ITT with sufficient capacity for all MSI-X vectors.
> Without this fix, msi_prepare() was called per-allocation with
> semi-random nvec, maybe resulting in an ITT too small for dynamic
> vector addition.
How is this paragraph relevant? The kernel has had this fix for over a
year, and backporting this series is not something I plan to ever do.
>
> With this in place, dynamic MSI-X allocation works correctly:
> msi_domain_alloc_irq_at() uses populate_alloc_info() to copy the
> pre-prepared alloc_data without re-invoking msi_prepare(), so each
> new vector simply gets a LPI entry in the already-allocated ITT,
> without affecting existing vectors.
>
> Signed-off-by: Jinqian Yang <yangjinqian1@huawei.com>
> ---
> drivers/irqchip/irq-gic-its-msi-parent.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/irqchip/irq-gic-its-msi-parent.c b/drivers/irqchip/irq-gic-its-msi-parent.c
> index b9257103a999..b2b9d2068bb1 100644
> --- a/drivers/irqchip/irq-gic-its-msi-parent.c
> +++ b/drivers/irqchip/irq-gic-its-msi-parent.c
> @@ -18,7 +18,8 @@
>
> #define ITS_MSI_FLAGS_SUPPORTED (MSI_GENERIC_FLAGS_MASK | \
> MSI_FLAG_PCI_MSIX | \
> - MSI_FLAG_MULTI_PCI_MSI)
> + MSI_FLAG_MULTI_PCI_MSI | \
> + MSI_FLAG_PCI_MSIX_ALLOC_DYN)
>
> static int its_translate_frame_address(struct fwnode_handle *msi_node, phys_addr_t *pa)
> {
What has this been tested with? In which conditions?
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
^ permalink raw reply
* Re: [PATCH v6 17/21] RISC-V: perf: Add Qemu virt machine events
From: Atish Patra @ 2026-06-24 7:00 UTC (permalink / raw)
To: Charlie Jenkins
Cc: James Clark, Rob Herring, Arnaldo Carvalho de Melo, Jiri Olsa,
Will Deacon, Mark Rutland, Anup Patel, Namhyung Kim,
Paul Walmsley, Krzysztof Kozlowski, Ian Rogers, linux-riscv,
linux-kernel, linux-perf-users, Conor Dooley, devicetree,
linux-arm-kernel
In-Reply-To: <ajjZ5NljehUXERN1@blinky>
On 6/21/26 11:44 PM, Charlie Jenkins wrote:
> On Mon, Jun 08, 2026 at 11:01:31PM -0700, Atish Patra wrote:
>> From: Atish Patra <atishp@rivosinc.com>
>>
>> Qemu virt machine supports a very minimal set of legacy perf events.
>> Add them to the vendor table so that users can use them when
>> counter delegation is enabled.
>>
>> Signed-off-by: Atish Patra <atishp@rivosinc.com>
>> ---
>> arch/riscv/include/asm/vendorid_list.h | 4 ++++
>> drivers/perf/riscv_pmu_sbi.c | 36 ++++++++++++++++++++++++++++++++++
>> 2 files changed, 40 insertions(+)
>>
>> diff --git a/arch/riscv/include/asm/vendorid_list.h b/arch/riscv/include/asm/vendorid_list.h
>> index 7f5030ee1fcf..603aa2b21c0b 100644
>> --- a/arch/riscv/include/asm/vendorid_list.h
>> +++ b/arch/riscv/include/asm/vendorid_list.h
>> @@ -11,4 +11,8 @@
>> #define SIFIVE_VENDOR_ID 0x489
>> #define THEAD_VENDOR_ID 0x5b7
>>
>> +#define QEMU_VIRT_VENDOR_ID 0x000
>> +#define QEMU_VIRT_IMPL_ID 0x000
>> +#define QEMU_VIRT_ARCH_ID 0x000
> Palmer proposed a change to this a while ago to set the archid for qemu
> as 42 but it looks like it was never merged in qemu, but it was merged
> into the riscv spec.
>
> Here is the spec PR: https://github.com/riscv/riscv-isa-manual/pull/1213
> Here is the current spec: https://github.com/riscv/riscv-isa-manual/blob/main/marchid.md
> Here is the QEMU patch: https://lore.kernel.org/all/20240131182430.20174-1-palmer@rivosinc.com/
>
> Should we follow up with this/maybe this should be accounted for here as
> an alternate id?
Ahh yes. I remember that thread now. Thanks for digging this.
Yes. We should resurrect that patch and use that archid as an alternate ID.
> - Charlie
>
>> +
>> #endif
>> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
>> index 00b84b28117a..74acac54328e 100644
>> --- a/drivers/perf/riscv_pmu_sbi.c
>> +++ b/drivers/perf/riscv_pmu_sbi.c
>> @@ -26,6 +26,7 @@
>> #include <asm/sbi.h>
>> #include <asm/cpufeature.h>
>> #include <asm/vendor_extensions.h>
>> +#include <asm/vendorid_list.h>
>> #include <asm/vendor_extensions/andes.h>
>> #include <asm/hwcap.h>
>> #include <asm/csr_ind.h>
>> @@ -453,7 +454,42 @@ struct riscv_vendor_pmu_events {
>> .hw_event_map = _hw_event_map, .cache_event_map = _cache_event_map, \
>> .attrs_events = _attrs },
>>
>> +/* QEMU virt PMU events */
>> +static const struct riscv_pmu_event qemu_virt_hw_event_map[PERF_COUNT_HW_MAX] = {
>> + PERF_MAP_ALL_UNSUPPORTED,
>> + [PERF_COUNT_HW_CPU_CYCLES] = {0x01, 0xFFFFFFF8},
>> + [PERF_COUNT_HW_INSTRUCTIONS] = {0x02, 0xFFFFFFF8}
>> +};
>> +
>> +static const struct riscv_pmu_event qemu_virt_cache_event_map[PERF_COUNT_HW_CACHE_MAX]
>> + [PERF_COUNT_HW_CACHE_OP_MAX]
>> + [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
>> + PERF_CACHE_MAP_ALL_UNSUPPORTED,
>> + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = {0x10019, 0xFFFFFFF8},
>> + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = {0x1001B, 0xFFFFFFF8},
>> +
>> + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = {0x10021, 0xFFFFFFF8},
>> +};
>> +
>> +RVPMU_EVENT_CMASK_ATTR(cycles, cycles, 0x01, 0xFFFFFFF8);
>> +RVPMU_EVENT_CMASK_ATTR(instructions, instructions, 0x02, 0xFFFFFFF8);
>> +RVPMU_EVENT_CMASK_ATTR(dTLB-load-misses, dTLB_load_miss, 0x10019, 0xFFFFFFF8);
>> +RVPMU_EVENT_CMASK_ATTR(dTLB-store-misses, dTLB_store_miss, 0x1001B, 0xFFFFFFF8);
>> +RVPMU_EVENT_CMASK_ATTR(iTLB-load-misses, iTLB_load_miss, 0x10021, 0xFFFFFFF8);
>> +
>> +static struct attribute *qemu_virt_event_group[] = {
>> + RVPMU_EVENT_ATTR_PTR(cycles),
>> + RVPMU_EVENT_ATTR_PTR(instructions),
>> + RVPMU_EVENT_ATTR_PTR(dTLB_load_miss),
>> + RVPMU_EVENT_ATTR_PTR(dTLB_store_miss),
>> + RVPMU_EVENT_ATTR_PTR(iTLB_load_miss),
>> + NULL,
>> +};
>> +
>> static struct riscv_vendor_pmu_events pmu_vendor_events_table[] = {
>> + RISCV_VENDOR_PMU_EVENTS(QEMU_VIRT_VENDOR_ID, QEMU_VIRT_ARCH_ID, QEMU_VIRT_IMPL_ID,
>> + qemu_virt_hw_event_map, qemu_virt_cache_event_map,
>> + qemu_virt_event_group)
>> };
>>
>> static const struct riscv_pmu_event *current_pmu_hw_event_map;
>>
>> --
>> 2.53.0-Meta
>>
>>
^ permalink raw reply
* [PATCH] media: meson: vdec: fix NULL pointer deref in vdec_try_fmt_common
From: Christian Hewitt @ 2026-06-24 6:58 UTC (permalink / raw)
To: Neil Armstrong, Greg Kroah-Hartman, Kevin Hilman, Jerome Brunet,
Martin Blumenstingl, linux-media, linux-amlogic, linux-staging,
linux-arm-kernel, linux-kernel
When VIDIOC_TRY_FMT is called with an unsupported pixel format on the
OUTPUT queue, vdec_try_fmt_common() falls back to V4L2_PIX_FMT_MPEG2.
However, if a distro has locally patched MPEG2 support out (as it has
been broken for some time) the platform format table does not contain
MPEG2 so find_format() returns NULL and the subsequent dereference of
fmt_out->max_width triggers a NULL pointer dereference.
Fix this by falling back to the first format in the platform's format
array instead of hardcoding V4L2_PIX_FMT_MPEG2. This is always valid
since every platform defines at least one format.
Fixes: 3e7f51bd9607 ("media: meson: add v4l2 m2m video decoder driver")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
This fixes use of v4l2-ctl and v4l2-compliance tools when MPEG2 support
has been disabled via vdec_platform.c - NB: although this is a fix it's
also a rather niche scenario so there's no need to backport it to older
stable kernels.
drivers/staging/media/meson/vdec/vdec.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/meson/vdec/vdec.c b/drivers/staging/media/meson/vdec/vdec.c
index 4b77ec1af5a7..f3e7072f221a 100644
--- a/drivers/staging/media/meson/vdec/vdec.c
+++ b/drivers/staging/media/meson/vdec/vdec.c
@@ -504,8 +504,8 @@ vdec_try_fmt_common(struct amvdec_session *sess, u32 size,
case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
fmt_out = find_format(fmts, size, pixmp->pixelformat);
if (!fmt_out) {
- pixmp->pixelformat = V4L2_PIX_FMT_MPEG2;
- fmt_out = find_format(fmts, size, pixmp->pixelformat);
+ pixmp->pixelformat = fmts[0].pixfmt;
+ fmt_out = &fmts[0];
}
break;
case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE:
--
2.43.0
^ permalink raw reply related
* Re: [PATCH v6 04/21] RISC-V: Define indirect CSR access helpers
From: Atish Patra @ 2026-06-24 6:55 UTC (permalink / raw)
To: Charlie Jenkins
Cc: James Clark, Rob Herring, Arnaldo Carvalho de Melo, Jiri Olsa,
Will Deacon, Mark Rutland, Anup Patel, Namhyung Kim,
Paul Walmsley, Krzysztof Kozlowski, Ian Rogers, linux-riscv,
linux-kernel, linux-perf-users, Conor Dooley, devicetree,
linux-arm-kernel
In-Reply-To: <ajjZR-R11yPYWuDp@blinky>
On 6/21/26 11:42 PM, Charlie Jenkins wrote:
> On Mon, Jun 08, 2026 at 11:01:18PM -0700, Atish Patra wrote:
>> From: Atish Patra <atishp@rivosinc.com>
>>
>> The indriect CSR requires multiple instructions to read/write CSR.
> indirect
>
>> Add a few helper functions for ease of usage.
>>
>> Signed-off-by: Atish Patra <atishp@rivosinc.com>
>> ---
>> arch/riscv/include/asm/csr_ind.h | 44 ++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 44 insertions(+)
>>
>> diff --git a/arch/riscv/include/asm/csr_ind.h b/arch/riscv/include/asm/csr_ind.h
>> new file mode 100644
>> index 000000000000..6fd7d44dc640
>> --- /dev/null
>> +++ b/arch/riscv/include/asm/csr_ind.h
>> @@ -0,0 +1,44 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (C) 2024 Rivos Inc.
> I don't think it makes sense to introduce this copyright in new commits.
Yeah. I will update these.
> - Charlie
>
>> + */
>> +
>> +#ifndef _ASM_RISCV_CSR_IND_H
>> +#define _ASM_RISCV_CSR_IND_H
>> +
>> +#include <linux/irqflags.h>
>> +
>> +#include <asm/csr.h>
>> +
>> +#define csr_ind_read(iregcsr, iselbase, iseloff) ({ \
>> + unsigned long __value = 0; \
>> + unsigned long __flags; \
>> + local_irq_save(__flags); \
>> + csr_write(CSR_ISELECT, (iselbase) + (iseloff)); \
>> + __value = csr_read(iregcsr); \
>> + local_irq_restore(__flags); \
>> + __value; \
>> +})
>> +
>> +#define csr_ind_write(iregcsr, iselbase, iseloff, value) ({ \
>> + unsigned long __flags; \
>> + local_irq_save(__flags); \
>> + csr_write(CSR_ISELECT, (iselbase) + (iseloff)); \
>> + csr_write(iregcsr, (value)); \
>> + local_irq_restore(__flags); \
>> +})
>> +
>> +#define csr_ind_warl(iregcsr, iselbase, iseloff, warl_val) ({ \
>> + unsigned long __old_val = 0, __value = 0; \
>> + unsigned long __flags; \
>> + local_irq_save(__flags); \
>> + csr_write(CSR_ISELECT, (iselbase) + (iseloff)); \
>> + __old_val = csr_read(iregcsr); \
>> + csr_write(iregcsr, (warl_val)); \
>> + __value = csr_read(iregcsr); \
>> + csr_write(iregcsr, __old_val); \
>> + local_irq_restore(__flags); \
>> + __value; \
>> +})
>> +
>> +#endif
>>
>> --
>> 2.53.0-Meta
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>
^ permalink raw reply
* Re: [PATCH v5 4/6] dt-bindings: input: sun4i-lradc-keys: Add A100/A133 compatible
From: Krzysztof Kozlowski @ 2026-06-24 6:51 UTC (permalink / raw)
To: Alexander Sverdlin
Cc: linux-arm-kernel, linux-sunxi, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland,
Hans de Goede, Dmitry Torokhov, Andre Przywara, Jun Yan,
Lukas Schmid, J. Neuschäfer, Eric Biggers, Michal Simek,
Luca Weiss, Sven Peter, Maxime Ripard, devicetree, linux-kernel,
linux-input
In-Reply-To: <20260623204824.691832-5-alexander.sverdlin@gmail.com>
On Tue, Jun 23, 2026 at 10:48:16PM +0200, Alexander Sverdlin wrote:
> The Allwinner A100/A133 SoCs have an LRADC which is compatible with the
> versions in existing SoCs. Add a compatible string for A100, with the R329
> fallback.
>
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> ---
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v6 1/4] dt-bindings: soc: cix: add sky1 audss cru controller
From: Krzysztof Kozlowski @ 2026-06-24 6:49 UTC (permalink / raw)
To: joakim.zhang
Cc: mturquette, sboyd, bmasney, robh, krzk+dt, conor+dt, p.zabel,
gary.yang, cix-kernel-upstream, linux-clk, devicetree,
linux-kernel, linux-arm-kernel
In-Reply-To: <20260623070805.211019-2-joakim.zhang@cixtech.com>
On Tue, Jun 23, 2026 at 03:08:02PM +0800, joakim.zhang@cixtech.com wrote:
> From: Joakim Zhang <joakim.zhang@cixtech.com>
>
> The Cix Sky1 Audio Subsystem (AUDSS) Clock and Reset Unit (CRU)
> groups clock muxing, gating and block-level software reset control
> in a single register block.
>
> Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
> ---
> .../bindings/soc/cix/cix,sky1-audss-cru.yaml | 92 +++++++++++++++++++
> .../dt-bindings/clock/cix,sky1-audss-cru.h | 60 ++++++++++++
> .../dt-bindings/reset/cix,sky1-audss-cru.h | 25 +++++
> 3 files changed, 177 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/cix/cix,sky1-audss-cru.yaml
> create mode 100644 include/dt-bindings/clock/cix,sky1-audss-cru.h
> create mode 100644 include/dt-bindings/reset/cix,sky1-audss-cru.h
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply
* [linux-next:master] BUILD REGRESSION 4e5dfb7c84012007c3c7061126491bbc92d71bf1
From: kernel test robot @ 2026-06-24 6:42 UTC (permalink / raw)
To: Andrew Morton
Cc: Linux Memory Management List, amd-gfx, imx, linux-arm-kernel,
Mark Brown
tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
branch HEAD: 4e5dfb7c84012007c3c7061126491bbc92d71bf1 Add linux-next specific files for 20260623
Error/Warning (recently discovered and may have been fixed):
https://lore.kernel.org/oe-kbuild-all/202606240749.ZFFiISB2-lkp@intel.com
https://lore.kernel.org/oe-kbuild-all/202606240753.kYjobJVl-lkp@intel.com
https://lore.kernel.org/oe-kbuild-all/202606241110.iUga5vVw-lkp@intel.com
https://lore.kernel.org/oe-kbuild-all/202606241320.9gDd2s75-lkp@intel.com
https://lore.kernel.org/oe-kbuild-all/202606241431.L9VUbAKp-lkp@intel.com
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/tests/amdgpu_dm_connector_test.c:120:1: warning: the frame size of 1384 bytes is larger than 1280 bytes [-Wframe-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/tests/amdgpu_dm_connector_test.c:120:1: warning: the frame size of 1388 bytes is larger than 1280 bytes [-Wframe-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/tests/amdgpu_dm_connector_test.c:120:1: warning: the frame size of 1424 bytes is larger than 1280 bytes [-Wframe-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/tests/amdgpu_dm_connector_test.c:120:1: warning: the frame size of 1696 bytes is larger than 1280 bytes [-Wframe-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/tests/amdgpu_dm_connector_test.c:120:1: warning: the frame size of 1696 bytes is larger than 1536 bytes [-Wframe-larger-than=]
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.o: error: objtool: amdgpu_vm_handle_fault+0x97: sibling call from callable instruction with modified stack frame
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.o: warning: objtool: amdgpu_vm_handle_fault+0x12d: sibling call from callable instruction with modified stack frame
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.o: warning: objtool: amdgpu_vm_handle_fault+0x140: sibling call from callable instruction with modified stack frame
Error/Warning ids grouped by kconfigs:
recent_errors
|-- arc-allmodconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- arc-allyesconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- arm-allyesconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- csky-allmodconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- i386-allmodconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- i386-allyesconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- loongarch-defconfig
| `-- drivers-gpu-drm-amd-amdgpu-amdgpu_vm.o:warning:objtool:amdgpu_vm_handle_fault:sibling-call-from-callable-instruction-with-modified-stack-frame
|-- microblaze-allyesconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- mips-allmodconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- mips-allyesconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- openrisc-allmodconfig
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
|-- powerpc64-randconfig-r052-20260624
| `-- drivers-firmware-imx-se_ctrl.c:WARNING:invalid-free-of-devm_-allocated-data
|-- sparc-randconfig-r133-20260624
| `-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-..-..-..-amdgpu-amdgv_sriovmsg.h:sparse:sparse:static-assertion-failed:amd_sriov_msg_vf2pf_info-must-be-KB
|-- x86_64-randconfig-003-20260622
| `-- drivers-gpu-drm-amd-amdgpu-amdgpu_vm.o:warning:objtool:amdgpu_vm_handle_fault:sibling-call-from-callable-instruction-with-modified-stack-frame
|-- x86_64-randconfig-072-20250919
| `-- drivers-gpu-drm-amd-amdgpu-amdgpu_vm.o:error:objtool:amdgpu_vm_handle_fault:sibling-call-from-callable-instruction-with-modified-stack-frame
`-- xtensa-allyesconfig
`-- drivers-gpu-drm-amd-amdgpu-..-display-amdgpu_dm-tests-amdgpu_dm_connector_test.c:warning:the-frame-size-of-bytes-is-larger-than-bytes
elapsed time: 941m
configs tested: 278
configs skipped: 4
tested configs:
alpha allnoconfig gcc-16.1.0
alpha allyesconfig gcc-16.1.0
alpha defconfig gcc-16.1.0
arc allmodconfig clang-23
arc allmodconfig gcc-16.1.0
arc allnoconfig gcc-16.1.0
arc allyesconfig clang-23
arc allyesconfig gcc-16.1.0
arc defconfig gcc-16.1.0
arc randconfig-001-20260624 gcc-15.2.0
arc randconfig-001-20260624 gcc-9.5.0
arc randconfig-002-20260624 gcc-15.2.0
arm allnoconfig clang-17
arm allnoconfig gcc-16.1.0
arm allyesconfig clang-23
arm allyesconfig gcc-16.1.0
arm defconfig clang-23
arm defconfig gcc-16.1.0
arm randconfig-001-20260624 clang-19
arm randconfig-001-20260624 gcc-15.2.0
arm randconfig-002-20260624 gcc-15.2.0
arm randconfig-002-20260624 gcc-8.5.0
arm randconfig-003-20260624 gcc-15.2.0
arm randconfig-004-20260624 clang-17
arm randconfig-004-20260624 gcc-15.2.0
arm sama5_defconfig gcc-16.1.0
arm64 allmodconfig clang-23
arm64 allnoconfig gcc-16.1.0
arm64 defconfig gcc-16.1.0
arm64 randconfig-001-20260624 clang-21
arm64 randconfig-002-20260624 clang-21
arm64 randconfig-002-20260624 gcc-15.2.0
arm64 randconfig-003-20260624 clang-21
arm64 randconfig-003-20260624 clang-23
arm64 randconfig-004-20260624 clang-21
arm64 randconfig-004-20260624 clang-23
csky allmodconfig gcc-16.1.0
csky allnoconfig gcc-16.1.0
csky defconfig gcc-16.1.0
csky randconfig-001-20260624 clang-21
csky randconfig-001-20260624 gcc-16.1.0
csky randconfig-002-20260624 clang-21
csky randconfig-002-20260624 gcc-9.5.0
hexagon allmodconfig clang-23
hexagon allmodconfig gcc-16.1.0
hexagon allnoconfig clang-23
hexagon allnoconfig gcc-16.1.0
hexagon defconfig clang-23
hexagon defconfig gcc-16.1.0
hexagon randconfig-001 gcc-11.5.0
hexagon randconfig-001-20260624 clang-20
hexagon randconfig-001-20260624 gcc-11.5.0
hexagon randconfig-002 gcc-11.5.0
hexagon randconfig-002-20260624 clang-23
hexagon randconfig-002-20260624 gcc-11.5.0
i386 allmodconfig clang-22
i386 allnoconfig gcc-14
i386 allnoconfig gcc-16.1.0
i386 allyesconfig clang-22
i386 allyesconfig gcc-14
i386 buildonly-randconfig-001 gcc-12
i386 buildonly-randconfig-001-20260624 gcc-12
i386 buildonly-randconfig-001-20260624 gcc-14
i386 buildonly-randconfig-002 gcc-12
i386 buildonly-randconfig-002-20260624 gcc-12
i386 buildonly-randconfig-002-20260624 gcc-14
i386 buildonly-randconfig-003 gcc-12
i386 buildonly-randconfig-003-20260624 gcc-12
i386 buildonly-randconfig-004 gcc-12
i386 buildonly-randconfig-004-20260624 gcc-12
i386 buildonly-randconfig-004-20260624 gcc-14
i386 buildonly-randconfig-005 gcc-12
i386 buildonly-randconfig-005-20260624 gcc-12
i386 buildonly-randconfig-005-20260624 gcc-14
i386 buildonly-randconfig-006 gcc-12
i386 buildonly-randconfig-006-20260624 gcc-12
i386 buildonly-randconfig-006-20260624 gcc-14
i386 defconfig clang-22
i386 defconfig gcc-16.1.0
i386 randconfig-001-20260624 clang-22
i386 randconfig-001-20260624 gcc-14
i386 randconfig-002-20260624 clang-22
i386 randconfig-002-20260624 gcc-14
i386 randconfig-003-20260624 clang-22
i386 randconfig-003-20260624 gcc-14
i386 randconfig-004-20260624 clang-22
i386 randconfig-004-20260624 gcc-12
i386 randconfig-005-20260624 clang-22
i386 randconfig-006-20260624 clang-22
i386 randconfig-007-20260624 clang-22
i386 randconfig-007-20260624 gcc-14
i386 randconfig-011-20260624 clang-22
i386 randconfig-012-20260624 clang-22
i386 randconfig-012-20260624 gcc-14
i386 randconfig-013-20260624 clang-22
i386 randconfig-014-20260624 clang-22
i386 randconfig-015-20260624 clang-22
i386 randconfig-015-20260624 gcc-14
i386 randconfig-016-20260624 clang-22
i386 randconfig-017-20260624 clang-22
loongarch allmodconfig clang-19
loongarch allmodconfig clang-23
loongarch allnoconfig clang-20
loongarch allnoconfig gcc-16.1.0
loongarch defconfig clang-23
loongarch randconfig-001 gcc-11.5.0
loongarch randconfig-001-20260624 gcc-11.5.0
loongarch randconfig-001-20260624 gcc-16.1.0
loongarch randconfig-002 gcc-11.5.0
loongarch randconfig-002-20260624 gcc-11.5.0
loongarch randconfig-002-20260624 gcc-15.2.0
m68k allmodconfig gcc-16.1.0
m68k allnoconfig gcc-16.1.0
m68k allyesconfig clang-23
m68k allyesconfig gcc-16.1.0
m68k defconfig clang-23
m68k defconfig gcc-16.1.0
microblaze allnoconfig gcc-16.1.0
microblaze allyesconfig gcc-16.1.0
microblaze defconfig clang-23
microblaze defconfig gcc-16.1.0
mips allmodconfig gcc-16.1.0
mips allnoconfig gcc-16.1.0
mips allyesconfig gcc-16.1.0
nios2 allmodconfig clang-20
nios2 allmodconfig gcc-11.5.0
nios2 allnoconfig clang-23
nios2 allnoconfig gcc-11.5.0
nios2 defconfig clang-23
nios2 defconfig gcc-11.5.0
nios2 randconfig-001 gcc-11.5.0
nios2 randconfig-001-20260624 gcc-11.5.0
nios2 randconfig-001-20260624 gcc-9.5.0
nios2 randconfig-002 gcc-11.5.0
nios2 randconfig-002-20260624 gcc-11.5.0
openrisc allmodconfig clang-20
openrisc allmodconfig gcc-16.1.0
openrisc allnoconfig clang-23
openrisc allnoconfig gcc-16.1.0
openrisc defconfig gcc-16.1.0
parisc allmodconfig gcc-16.1.0
parisc allnoconfig clang-23
parisc allnoconfig gcc-16.1.0
parisc allyesconfig clang-17
parisc allyesconfig gcc-16.1.0
parisc defconfig gcc-16.1.0
parisc randconfig-001-20260624 gcc-16.1.0
parisc randconfig-002-20260624 gcc-14.3.0
parisc randconfig-002-20260624 gcc-16.1.0
parisc64 defconfig clang-23
parisc64 defconfig gcc-16.1.0
powerpc allmodconfig gcc-16.1.0
powerpc allnoconfig clang-23
powerpc allnoconfig gcc-16.1.0
powerpc asp8347_defconfig clang-23
powerpc randconfig-001-20260624 clang-17
powerpc randconfig-001-20260624 gcc-16.1.0
powerpc randconfig-002-20260624 gcc-16.1.0
powerpc randconfig-002-20260624 gcc-8.5.0
powerpc64 randconfig-001-20260624 gcc-16.1.0
powerpc64 randconfig-001-20260624 gcc-8.5.0
powerpc64 randconfig-002-20260624 gcc-11.5.0
powerpc64 randconfig-002-20260624 gcc-16.1.0
riscv allmodconfig clang-23
riscv allnoconfig clang-23
riscv allnoconfig gcc-16.1.0
riscv allyesconfig clang-23
riscv defconfig clang-23
riscv defconfig gcc-16.1.0
riscv randconfig-001-20260624 clang-18
riscv randconfig-001-20260624 gcc-13.4.0
riscv randconfig-002-20260624 clang-18
s390 allmodconfig clang-17
s390 allmodconfig clang-23
s390 allnoconfig clang-23
s390 allyesconfig gcc-16.1.0
s390 defconfig clang-18
s390 defconfig gcc-16.1.0
s390 randconfig-001-20260624 clang-18
s390 randconfig-001-20260624 gcc-8.5.0
s390 randconfig-002-20260624 clang-18
s390 randconfig-002-20260624 gcc-10.5.0
sh allmodconfig gcc-16.1.0
sh allnoconfig clang-23
sh allnoconfig gcc-16.1.0
sh allyesconfig clang-17
sh allyesconfig gcc-16.1.0
sh defconfig gcc-14
sh defconfig gcc-16.1.0
sh randconfig-001-20260624 clang-18
sh randconfig-001-20260624 gcc-15.2.0
sh randconfig-002-20260624 clang-18
sh randconfig-002-20260624 gcc-9.5.0
sparc allnoconfig clang-23
sparc allnoconfig gcc-16.1.0
sparc defconfig gcc-16.1.0
sparc randconfig-001-20260624 gcc-14.3.0
sparc randconfig-001-20260624 gcc-8.5.0
sparc randconfig-002-20260624 gcc-14.3.0
sparc randconfig-002-20260624 gcc-8.5.0
sparc64 allmodconfig clang-20
sparc64 defconfig clang-23
sparc64 defconfig gcc-14
sparc64 randconfig-001-20260624 clang-20
sparc64 randconfig-001-20260624 gcc-14.3.0
sparc64 randconfig-002-20260624 clang-20
sparc64 randconfig-002-20260624 gcc-14.3.0
um allmodconfig clang-17
um allnoconfig clang-17
um allnoconfig clang-23
um allyesconfig gcc-14
um allyesconfig gcc-16.1.0
um defconfig clang-23
um defconfig gcc-14
um i386_defconfig gcc-14
um randconfig-001-20260624 clang-23
um randconfig-001-20260624 gcc-14.3.0
um randconfig-002-20260624 clang-17
um randconfig-002-20260624 gcc-14.3.0
um x86_64_defconfig clang-23
um x86_64_defconfig gcc-14
x86_64 allmodconfig clang-22
x86_64 allnoconfig clang-22
x86_64 allnoconfig clang-23
x86_64 allyesconfig clang-22
x86_64 buildonly-randconfig-001-20260624 clang-22
x86_64 buildonly-randconfig-001-20260624 gcc-14
x86_64 buildonly-randconfig-002-20260624 clang-22
x86_64 buildonly-randconfig-003-20260624 clang-22
x86_64 buildonly-randconfig-003-20260624 gcc-14
x86_64 buildonly-randconfig-004-20260624 clang-22
x86_64 buildonly-randconfig-005-20260624 clang-22
x86_64 buildonly-randconfig-005-20260624 gcc-14
x86_64 buildonly-randconfig-006-20260624 clang-22
x86_64 buildonly-randconfig-006-20260624 gcc-14
x86_64 defconfig gcc-14
x86_64 kexec clang-22
x86_64 randconfig-001-20260624 clang-22
x86_64 randconfig-002-20260624 clang-22
x86_64 randconfig-003-20260624 clang-22
x86_64 randconfig-004-20260624 clang-22
x86_64 randconfig-004-20260624 gcc-14
x86_64 randconfig-005-20260624 clang-22
x86_64 randconfig-006-20260624 clang-22
x86_64 randconfig-006-20260624 gcc-14
x86_64 randconfig-011-20260624 gcc-14
x86_64 randconfig-012-20260624 gcc-14
x86_64 randconfig-013-20260624 gcc-12
x86_64 randconfig-013-20260624 gcc-14
x86_64 randconfig-014-20260624 gcc-14
x86_64 randconfig-015-20260624 gcc-14
x86_64 randconfig-016-20260624 gcc-14
x86_64 randconfig-071-20260624 gcc-14
x86_64 randconfig-072-20260624 clang-22
x86_64 randconfig-072-20260624 gcc-14
x86_64 randconfig-073-20260624 gcc-14
x86_64 randconfig-074-20260624 clang-22
x86_64 randconfig-074-20260624 gcc-14
x86_64 randconfig-075-20260624 gcc-14
x86_64 randconfig-076-20260624 clang-22
x86_64 randconfig-076-20260624 gcc-14
x86_64 rhel-9.4 clang-22
x86_64 rhel-9.4 gcc-14
x86_64 rhel-9.4-bpf gcc-14
x86_64 rhel-9.4-func clang-22
x86_64 rhel-9.4-func gcc-14
x86_64 rhel-9.4-kselftests clang-22
x86_64 rhel-9.4-kselftests gcc-14
x86_64 rhel-9.4-kunit gcc-14
x86_64 rhel-9.4-ltp gcc-14
x86_64 rhel-9.4-rust clang-22
xtensa allnoconfig clang-23
xtensa allnoconfig gcc-16.1.0
xtensa allyesconfig clang-20
xtensa allyesconfig gcc-16.1.0
xtensa randconfig-001-20260624 gcc-14.3.0
xtensa randconfig-002-20260624 gcc-14.3.0
xtensa randconfig-002-20260624 gcc-16.1.0
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox