Re: [PATCH v1 4/4] arm64: dts: qcom: ipq9574: add thermal zone nodes

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 03/05/2023 07:46, Varadarajan Narayanan wrote:
> This patch adds thermal zone nodes for the various
> sensors present in IPQ9574
> 
> Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

one nit below.


> ---
> [v1]:
> 	Fix node names
> ---
>   arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++
>   1 file changed, 208 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index b22b999..bc4d061 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -1067,6 +1067,214 @@
>   		};
>   	};
>   
> +	thermal-zones {
> +		nss-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 3>;
> +
> +			trips {
> +				nss-top-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 4>;
> +
> +			trips {
> +				ubi_0-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 5>;
> +
> +			trips {
> +				ubi_1-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 6>;
> +
> +			trips {
> +				ubi_2-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-3-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 7>;
> +
> +			trips {
> +				ubi_3-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cluster0-thermal {

I think we were usually using cpussN instead of clusterN, but this is 
really a minor issue, we don't have that standardized.

> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 8>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cluster1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 9>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 10>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 11>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 12>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu3-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 13>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		wcss-phyb-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 14>;
> +
> +			trips {
> +				wcss_phyb-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		top-glue-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 15>;
> +
> +			trips {
> +				top_glue-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>   	timer {
>   		compatible = "arm,armv8-timer";
>   		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

-- 
With best wishes
Dmitry