[PATCH AUTOSEL 6.11 19/33] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops

[PATCH AUTOSEL 6.11 19/33] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit aec8c0e28ce4a1f89fd82fcc06a5cc73147e9817 ]

Generally SDCC clocks use clk_rcg2_floor_ops, however on SAR2130P
platform it's recommended to use rcg2_shared_ops for all Root Clock
Generators to park them instead of disabling. Implement a mix of those,
clk_rcg2_shared_floor_ops.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-6-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-rcg.h  |  1 +
 drivers/clk/qcom/clk-rcg2.c | 48 +++++++++++++++++++++++++++++++++----
 2 files changed, 44 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index 8e0f3372dc7a8..80f1f4fcd52a6 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -198,6 +198,7 @@ extern const struct clk_ops clk_byte2_ops;
 extern const struct clk_ops clk_pixel_ops;
 extern const struct clk_ops clk_gfx3d_ops;
 extern const struct clk_ops clk_rcg2_shared_ops;
+extern const struct clk_ops clk_rcg2_shared_floor_ops;
 extern const struct clk_ops clk_rcg2_shared_no_init_park_ops;
 extern const struct clk_ops clk_dp_ops;
 
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index bf26c5448f006..bf6406f5279a4 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -1186,15 +1186,23 @@ clk_rcg2_shared_force_enable_clear(struct clk_hw *hw, const struct freq_tbl *f)
 	return clk_rcg2_clear_force_enable(hw);
 }
 
-static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
-				    unsigned long parent_rate)
+static int __clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long parent_rate,
+				      enum freq_policy policy)
 {
 	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
 	const struct freq_tbl *f;
 
-	f = qcom_find_freq(rcg->freq_tbl, rate);
-	if (!f)
+	switch (policy) {
+	case FLOOR:
+		f = qcom_find_freq_floor(rcg->freq_tbl, rate);
+		break;
+	case CEIL:
+		f = qcom_find_freq(rcg->freq_tbl, rate);
+		break;
+	default:
 		return -EINVAL;
+	}
 
 	/*
 	 * In case clock is disabled, update the M, N and D registers, cache
@@ -1207,10 +1215,28 @@ static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
 	return clk_rcg2_shared_force_enable_clear(hw, f);
 }
 
+static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate)
+{
+	return __clk_rcg2_shared_set_rate(hw, rate, parent_rate, CEIL);
+}
+
 static int clk_rcg2_shared_set_rate_and_parent(struct clk_hw *hw,
 		unsigned long rate, unsigned long parent_rate, u8 index)
 {
-	return clk_rcg2_shared_set_rate(hw, rate, parent_rate);
+	return __clk_rcg2_shared_set_rate(hw, rate, parent_rate, CEIL);
+}
+
+static int clk_rcg2_shared_set_floor_rate(struct clk_hw *hw, unsigned long rate,
+					  unsigned long parent_rate)
+{
+	return __clk_rcg2_shared_set_rate(hw, rate, parent_rate, FLOOR);
+}
+
+static int clk_rcg2_shared_set_floor_rate_and_parent(struct clk_hw *hw,
+		unsigned long rate, unsigned long parent_rate, u8 index)
+{
+	return __clk_rcg2_shared_set_rate(hw, rate, parent_rate, FLOOR);
 }
 
 static int clk_rcg2_shared_enable(struct clk_hw *hw)
@@ -1348,6 +1374,18 @@ const struct clk_ops clk_rcg2_shared_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_rcg2_shared_ops);
 
+const struct clk_ops clk_rcg2_shared_floor_ops = {
+	.enable = clk_rcg2_shared_enable,
+	.disable = clk_rcg2_shared_disable,
+	.get_parent = clk_rcg2_shared_get_parent,
+	.set_parent = clk_rcg2_shared_set_parent,
+	.recalc_rate = clk_rcg2_shared_recalc_rate,
+	.determine_rate = clk_rcg2_determine_floor_rate,
+	.set_rate = clk_rcg2_shared_set_floor_rate,
+	.set_rate_and_parent = clk_rcg2_shared_set_floor_rate_and_parent,
+};
+EXPORT_SYMBOL_GPL(clk_rcg2_shared_floor_ops);
+
 static int clk_rcg2_shared_no_init_park(struct clk_hw *hw)
 {
 	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-- 
2.43.0

[PATCH AUTOSEL 6.11 20/33] clk: qcom: rpmh: add support for SAR2130P

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 2cc88de6261f01ebd4e2a3b4e29681fe87d0c089 ]

Define clocks as supported by the RPMh on the SAR2130P platform. The
msm-5.10 kernel declares just the CXO clock, the RF_CLK1 clock was added
following recommendation from Taniya Das.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-7-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-rpmh.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 4acde937114af..eefc322ce3679 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -389,6 +389,18 @@ DEFINE_CLK_RPMH_BCM(ipa, "IP0");
 DEFINE_CLK_RPMH_BCM(pka, "PKA0");
 DEFINE_CLK_RPMH_BCM(qpic_clk, "QP0");
 
+static struct clk_hw *sar2130p_rpmh_clocks[] = {
+	[RPMH_CXO_CLK]		= &clk_rpmh_bi_tcxo_div1.hw,
+	[RPMH_CXO_CLK_A]	= &clk_rpmh_bi_tcxo_div1_ao.hw,
+	[RPMH_RF_CLK1]		= &clk_rpmh_rf_clk1_a.hw,
+	[RPMH_RF_CLK1_A]	= &clk_rpmh_rf_clk1_a_ao.hw,
+};
+
+static const struct clk_rpmh_desc clk_rpmh_sar2130p = {
+	.clks = sar2130p_rpmh_clocks,
+	.num_clks = ARRAY_SIZE(sar2130p_rpmh_clocks),
+};
+
 static struct clk_hw *sdm845_rpmh_clocks[] = {
 	[RPMH_CXO_CLK]		= &clk_rpmh_bi_tcxo_div2.hw,
 	[RPMH_CXO_CLK_A]	= &clk_rpmh_bi_tcxo_div2_ao.hw,
@@ -880,6 +892,7 @@ static int clk_rpmh_probe(struct platform_device *pdev)
 static const struct of_device_id clk_rpmh_match_table[] = {
 	{ .compatible = "qcom,qdu1000-rpmh-clk", .data = &clk_rpmh_qdu1000},
 	{ .compatible = "qcom,sa8775p-rpmh-clk", .data = &clk_rpmh_sa8775p},
+	{ .compatible = "qcom,sar2130p-rpmh-clk", .data = &clk_rpmh_sar2130p},
 	{ .compatible = "qcom,sc7180-rpmh-clk", .data = &clk_rpmh_sc7180},
 	{ .compatible = "qcom,sc8180x-rpmh-clk", .data = &clk_rpmh_sc8180x},
 	{ .compatible = "qcom,sc8280xp-rpmh-clk", .data = &clk_rpmh_sc8280xp},
-- 
2.43.0

[PATCH AUTOSEL 6.11 21/33] clk: qcom: tcsrcc-sm8550: add SAR2130P support

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit d2e0a043530b9d6f37a8de8f05e0725667aba0a6 ]

The SAR2130P platform has the same TCSR Clock Controller as the SM8550,
except for the lack of the UFS clocks. Extend the SM8550 TCSRCC driver
to support SAR2130P.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-9-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/tcsrcc-sm8550.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/tcsrcc-sm8550.c b/drivers/clk/qcom/tcsrcc-sm8550.c
index e5e8f2e82b949..41d73f92a000a 100644
--- a/drivers/clk/qcom/tcsrcc-sm8550.c
+++ b/drivers/clk/qcom/tcsrcc-sm8550.c
@@ -129,6 +129,13 @@ static struct clk_branch tcsr_usb3_clkref_en = {
 	},
 };
 
+static struct clk_regmap *tcsr_cc_sar2130p_clocks[] = {
+	[TCSR_PCIE_0_CLKREF_EN] = &tcsr_pcie_0_clkref_en.clkr,
+	[TCSR_PCIE_1_CLKREF_EN] = &tcsr_pcie_1_clkref_en.clkr,
+	[TCSR_USB2_CLKREF_EN] = &tcsr_usb2_clkref_en.clkr,
+	[TCSR_USB3_CLKREF_EN] = &tcsr_usb3_clkref_en.clkr,
+};
+
 static struct clk_regmap *tcsr_cc_sm8550_clocks[] = {
 	[TCSR_PCIE_0_CLKREF_EN] = &tcsr_pcie_0_clkref_en.clkr,
 	[TCSR_PCIE_1_CLKREF_EN] = &tcsr_pcie_1_clkref_en.clkr,
@@ -146,6 +153,12 @@ static const struct regmap_config tcsr_cc_sm8550_regmap_config = {
 	.fast_io = true,
 };
 
+static const struct qcom_cc_desc tcsr_cc_sar2130p_desc = {
+	.config = &tcsr_cc_sm8550_regmap_config,
+	.clks = tcsr_cc_sar2130p_clocks,
+	.num_clks = ARRAY_SIZE(tcsr_cc_sar2130p_clocks),
+};
+
 static const struct qcom_cc_desc tcsr_cc_sm8550_desc = {
 	.config = &tcsr_cc_sm8550_regmap_config,
 	.clks = tcsr_cc_sm8550_clocks,
@@ -153,7 +166,8 @@ static const struct qcom_cc_desc tcsr_cc_sm8550_desc = {
 };
 
 static const struct of_device_id tcsr_cc_sm8550_match_table[] = {
-	{ .compatible = "qcom,sm8550-tcsr" },
+	{ .compatible = "qcom,sar2130p-tcsr", .data = &tcsr_cc_sar2130p_desc },
+	{ .compatible = "qcom,sm8550-tcsr", .data = &tcsr_cc_sm8550_desc },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tcsr_cc_sm8550_match_table);
@@ -162,7 +176,7 @@ static int tcsr_cc_sm8550_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
 
-	regmap = qcom_cc_map(pdev, &tcsr_cc_sm8550_desc);
+	regmap = qcom_cc_map(pdev, of_device_get_match_data(&pdev->dev));
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-- 
2.43.0

[PATCH AUTOSEL 6.11 22/33] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574

[Sasha Levin]

From: Devi Priya <quic_devipriy@quicinc.com>

[ Upstream commit 79dfed29aa3f714e0a94a39b2bfe9ac14ce19a6a ]

Add support for NSS Huayra alpha pll found on ipq9574 SoCs.
Programming sequence is the same as that of Huayra type Alpha PLL,
so we can re-use the same.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Link: https://lore.kernel.org/r/20241028060506.246606-2-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 11 +++++++++++
 drivers/clk/qcom/clk-alpha-pll.h |  1 +
 2 files changed, 12 insertions(+)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 8478bccd2533e..c91661921833c 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -267,6 +267,17 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_OPMODE] = 0x30,
 		[PLL_OFF_STATUS] = 0x3c,
 	},
+	[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA] =  {
+		[PLL_OFF_L_VAL] = 0x04,
+		[PLL_OFF_ALPHA_VAL] = 0x08,
+		[PLL_OFF_TEST_CTL] = 0x0c,
+		[PLL_OFF_TEST_CTL_U] = 0x10,
+		[PLL_OFF_USER_CTL] = 0x14,
+		[PLL_OFF_CONFIG_CTL] = 0x18,
+		[PLL_OFF_CONFIG_CTL_U] = 0x1c,
+		[PLL_OFF_STATUS] = 0x20,
+	},
+
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index e2cf5c7e501d0..b3ef043fdef3d 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -31,6 +31,7 @@ enum {
 	CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
 	CLK_ALPHA_PLL_TYPE_STROMER,
 	CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
+	CLK_ALPHA_PLL_TYPE_NSS_HUAYRA,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };
 
-- 
2.43.0

[PATCH AUTOSEL 6.11 26/33] pinctrl: qcom-pmic-gpio: add support for PM8937

[Sasha Levin]

From: Barnabás Czémán <barnabas.czeman@mainlining.org>

[ Upstream commit 89265a58ff24e3885c2c9ca722bc3aaa47018be9 ]

PM8937 has 8 GPIO-s with holes on GPIO3, GPIO4 and GPIO6.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-2-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index d2dd66769aa89..79ee60514372d 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1226,6 +1226,8 @@ static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pm8550ve-gpio", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8550vs-gpio", .data = (void *) 6 },
 	{ .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
+	/* pm8937 has 8 GPIOs with holes on 3, 4 and 6 */
+	{ .compatible = "qcom,pm8937-gpio", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
 	/* pm8950 has 8 GPIOs with holes on 3 */
 	{ .compatible = "qcom,pm8950-gpio", .data = (void *) 8 },
-- 
2.43.0

[PATCH AUTOSEL 6.11 27/33] pinctrl: qcom: spmi-mpp: Add PM8937 compatible

[Sasha Levin]

From: Barnabás Czémán <barnabas.czeman@mainlining.org>

[ Upstream commit f755261190e88f5d19fe0a3b762f0bbaff6bd438 ]

The PM8937 provides 4 MPPs.
Add a compatible to support them.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-4-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index d16ece90d926c..5fa04e7c1d5c4 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -983,6 +983,7 @@ static const struct of_device_id pmic_mpp_of_match[] = {
 	{ .compatible = "qcom,pm8226-mpp", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8841-mpp", .data = (void *) 4 },
 	{ .compatible = "qcom,pm8916-mpp", .data = (void *) 4 },
+	{ .compatible = "qcom,pm8937-mpp", .data = (void *) 4 },
 	{ .compatible = "qcom,pm8941-mpp", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8950-mpp", .data = (void *) 4 },
 	{ .compatible = "qcom,pmi8950-mpp", .data = (void *) 4 },
-- 
2.43.0

[PATCH AUTOSEL 6.11 28/33] thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens

[Sasha Levin]

From: Barnabás Czémán <barnabas.czeman@mainlining.org>

[ Upstream commit e2ffb6c3a40ee714160e35e61f0a984028b5d550 ]

Add support for tsens v1.4 block what can be found in
MSM8937 and MSM8917.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241113-msm8917-v6-5-c348fb599fef@mainlining.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/tsens-v1.c | 21 ++++++++++++++-------
 drivers/thermal/qcom/tsens.c    |  3 +++
 drivers/thermal/qcom/tsens.h    |  2 +-
 3 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index dc1c4ae2d8b01..1a7874676f68e 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -162,28 +162,35 @@ struct tsens_plat_data data_tsens_v1 = {
 	.fields	= tsens_v1_regfields,
 };
 
-static const struct tsens_ops ops_8956 = {
-	.init		= init_8956,
+static const struct tsens_ops ops_common = {
+	.init		= init_common,
 	.calibrate	= tsens_calibrate_common,
 	.get_temp	= get_temp_tsens_valid,
 };
 
-struct tsens_plat_data data_8956 = {
+struct tsens_plat_data data_8937 = {
 	.num_sensors	= 11,
-	.ops		= &ops_8956,
+	.ops		= &ops_common,
 	.feat		= &tsens_v1_feat,
 	.fields		= tsens_v1_regfields,
 };
 
-static const struct tsens_ops ops_8976 = {
-	.init		= init_common,
+static const struct tsens_ops ops_8956 = {
+	.init		= init_8956,
 	.calibrate	= tsens_calibrate_common,
 	.get_temp	= get_temp_tsens_valid,
 };
 
+struct tsens_plat_data data_8956 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8956,
+	.feat		= &tsens_v1_feat,
+	.fields		= tsens_v1_regfields,
+};
+
 struct tsens_plat_data data_8976 = {
 	.num_sensors	= 11,
-	.ops		= &ops_8976,
+	.ops		= &ops_common,
 	.feat		= &tsens_v1_feat,
 	.fields		= tsens_v1_regfields,
 };
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 0b4421bf47854..d2db804692f01 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -1119,6 +1119,9 @@ static const struct of_device_id tsens_table[] = {
 	}, {
 		.compatible = "qcom,msm8916-tsens",
 		.data = &data_8916,
+	}, {
+		.compatible = "qcom,msm8937-tsens",
+		.data = &data_8937,
 	}, {
 		.compatible = "qcom,msm8939-tsens",
 		.data = &data_8939,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index cab39de045b10..7b36a0318fa6a 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -647,7 +647,7 @@ extern struct tsens_plat_data data_8960;
 extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8974, data_9607;
 
 /* TSENS v1 targets */
-extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
+extern struct tsens_plat_data data_tsens_v1, data_8937, data_8976, data_8956;
 
 /* TSENS v2 targets */
 extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
-- 
2.43.0