* [PATCH v4 1/6] dt-bindings: vendor-prefixes: Add AYN Technologies
2026-03-23 16:27 [PATCH v4 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices Aaron Kling via B4 Relay
@ 2026-03-23 16:27 ` Aaron Kling via B4 Relay
2026-03-24 8:50 ` Krzysztof Kozlowski
2026-03-23 16:27 ` [PATCH v4 2/6] dt-bindings: arm: qcom: Add AYN QCS8550 Devices Aaron Kling via B4 Relay
` (4 subsequent siblings)
5 siblings, 1 reply; 20+ messages in thread
From: Aaron Kling via B4 Relay @ 2026-03-23 16:27 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Aaron Kling, Xilin Wu
From: Xilin Wu <wuxilin123@gmail.com>
Add an entry for AYN Technologies (https://www.ayntec.com/)
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 306343407019fe74bccd931a78ecefc6889e3fee..e20d9dc6a8322b79a5d80e7d3f7135c2b4cfa2ff 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -221,6 +221,8 @@ patternProperties:
description: Axiado Corporation
"^axis,.*":
description: Axis Communications AB
+ "^ayntec,.*":
+ description: AYN Technologies Co., Ltd.
"^azoteq,.*":
description: Azoteq (Pty) Ltd
"^azw,.*":
--
2.53.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v4 1/6] dt-bindings: vendor-prefixes: Add AYN Technologies
2026-03-23 16:27 ` [PATCH v4 1/6] dt-bindings: vendor-prefixes: Add AYN Technologies Aaron Kling via B4 Relay
@ 2026-03-24 8:50 ` Krzysztof Kozlowski
0 siblings, 0 replies; 20+ messages in thread
From: Krzysztof Kozlowski @ 2026-03-24 8:50 UTC (permalink / raw)
To: Aaron Kling
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel, Xilin Wu
On Mon, Mar 23, 2026 at 11:27:43AM -0500, Aaron Kling wrote:
> From: Xilin Wu <wuxilin123@gmail.com>
>
> Add an entry for AYN Technologies (https://www.ayntec.com/)
>
> Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
> Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
> 1 file changed, 2 insertions(+)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 2/6] dt-bindings: arm: qcom: Add AYN QCS8550 Devices
2026-03-23 16:27 [PATCH v4 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices Aaron Kling via B4 Relay
2026-03-23 16:27 ` [PATCH v4 1/6] dt-bindings: vendor-prefixes: Add AYN Technologies Aaron Kling via B4 Relay
@ 2026-03-23 16:27 ` Aaron Kling via B4 Relay
2026-03-24 8:50 ` Krzysztof Kozlowski
2026-03-23 16:27 ` [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common Aaron Kling via B4 Relay
` (3 subsequent siblings)
5 siblings, 1 reply; 20+ messages in thread
From: Aaron Kling via B4 Relay @ 2026-03-23 16:27 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Aaron Kling
From: Aaron Kling <webgeek1234@gmail.com>
Namely:
* Odin 2
* Odin 2 Mini
* Odin 2 Portal
* Thor
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index b4c79f89b285491adcbae83017e08a5cd11da77d..179b850bdcb6715c4ffcdc6f88771c520670e8b9 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1090,6 +1090,15 @@ properties:
- const: qcom,qcs8550
- const: qcom,sm8550
+ - items:
+ - enum:
+ - ayntec,odin2
+ - ayntec,odin2mini
+ - ayntec,odin2portal
+ - ayntec,thor
+ - const: qcom,qcs8550
+ - const: qcom,sm8550
+
- items:
- enum:
- qcom,sm8650-hdk
--
2.53.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v4 2/6] dt-bindings: arm: qcom: Add AYN QCS8550 Devices
2026-03-23 16:27 ` [PATCH v4 2/6] dt-bindings: arm: qcom: Add AYN QCS8550 Devices Aaron Kling via B4 Relay
@ 2026-03-24 8:50 ` Krzysztof Kozlowski
0 siblings, 0 replies; 20+ messages in thread
From: Krzysztof Kozlowski @ 2026-03-24 8:50 UTC (permalink / raw)
To: Aaron Kling
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel
On Mon, Mar 23, 2026 at 11:27:44AM -0500, Aaron Kling wrote:
> Namely:
> * Odin 2
> * Odin 2 Mini
> * Odin 2 Portal
> * Thor
>
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common
2026-03-23 16:27 [PATCH v4 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices Aaron Kling via B4 Relay
2026-03-23 16:27 ` [PATCH v4 1/6] dt-bindings: vendor-prefixes: Add AYN Technologies Aaron Kling via B4 Relay
2026-03-23 16:27 ` [PATCH v4 2/6] dt-bindings: arm: qcom: Add AYN QCS8550 Devices Aaron Kling via B4 Relay
@ 2026-03-23 16:27 ` Aaron Kling via B4 Relay
2026-03-24 12:35 ` Konrad Dybcio
2026-03-23 16:27 ` [PATCH v4 4/6] arm64: dts: qcom: Add AYN Odin 2 Mini Aaron Kling via B4 Relay
` (2 subsequent siblings)
5 siblings, 1 reply; 20+ messages in thread
From: Aaron Kling via B4 Relay @ 2026-03-23 16:27 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Aaron Kling,
Teguh Sobirin
From: Teguh Sobirin <teguh@sobir.in>
This contains everything common between the AYN QCS8550 devices. It will
be included by device specific dts'.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
.../arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi | 1762 ++++++++++++++++++++
1 file changed, 1762 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..f46672cca66b8a37bb8c514643273a2d915049ed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi
@@ -0,0 +1,1762 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcs8550.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/delete-node/ &aop_image_mem;
+/delete-node/ &aop_config_mem;
+/delete-node/ &camera_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &mpss_dsm_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &q6_mpss_dtb_mem;
+/delete-node/ &remoteproc_mpss;
+
+/ {
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &uart7;
+ serial1 = &uart14;
+ };
+
+ // The tzlog label is required by ABL to apply a dtbo, but it can be on any node
+ qcom_tzlog: chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&volume_up_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ debounce-interval = <15>;
+ gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu: endpoint {
+ remote-endpoint = <&usb0_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ pwm_fan: pwm-fan {
+ compatible = "pwm-fan";
+
+ fan-supply = <&vdd_fan_5v0>;
+ pwms = <&pm8550_pwm 3 50000>;
+
+ pinctrl-0 = <&fan_pwm_active>, <&fan_int>;
+ pinctrl-names = "default";
+
+ pulses-per-revolution = <4>;
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+ cooling-levels = <0 40 65 75 90 100 120 150 175>;
+ #cooling-cells = <2>;
+ };
+
+ reserved-memory {
+ hyp_mem: hyp-region@80000000 {
+ reg = <0 0x80000000 0 0xa00000>;
+ no-map;
+ };
+
+ cpusys_vm_mem: cpusys-vm-region@80a00000 {
+ reg = <0 0x80a00000 0 0x400000>;
+ no-map;
+ };
+
+ hyp_tags_mem: hyp-tags-region@80e00000 {
+ reg = <0 0x80e00000 0 0x3d0000>;
+ no-map;
+ };
+
+ xbl_sc_mem: xbl-sc-region@d8100000 {
+ reg = <0 0xd8100000 0 0x40000>;
+ no-map;
+ };
+
+ hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
+ reg = <0 0x811d0000 0 0x30000>;
+ no-map;
+ };
+
+ xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
+ reg = <0 0x81a00000 0 0x260000>;
+ no-map;
+ };
+
+ aop_config_merged_mem: aop-config-merged-region@81c80000 {
+ reg = <0 0x81c80000 0 0x74000>;
+ no-map;
+ };
+
+ chipinfo_mem: chipinfo-region@81cf4000 {
+ reg = <0 0x81cf4000 0 0x1000>;
+ no-map;
+ };
+
+ global_sync_mem: global-sync-region@82600000 {
+ reg = <0 0x82600000 0 0x100000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat-region@82700000 {
+ reg = <0 0x82700000 0 0x100000>;
+ no-map;
+ };
+
+ cpucp_fw_mem: cpucp-fw-region@d8140000 {
+ reg = <0 0xd8140000 0 0x1c0000>;
+ no-map;
+ };
+
+ qtee_mem: qtee-region@d8300000 {
+ reg = <0 0xd8300000 0 0x500000>;
+ no-map;
+ };
+
+ hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+ reg = <0 0xe6440000 0 0x2dd000>;
+ no-map;
+ };
+
+ hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
+ reg = <0 0xff700000 0 0x100000>;
+ no-map;
+ };
+
+ llcc_lpi_mem: llcc_lpi_region@ff800000 {
+ reg = <0 0xff800000 0 0x600000>;
+ no-map;
+ };
+
+ hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
+ reg = <0 0xfce00000 0 0x2900000>;
+ no-map;
+ };
+ };
+
+ sound {
+ compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+ pinctrl-0 = <&lpi_i2s3_active>;
+ pinctrl-names = "default";
+
+ model = "AYN-Odin2";
+ audio-routing = "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "TX SWR_INPUT1", "ADC2_OUTPUT";
+
+ speaker-i2s-dai-link {
+ link-name = "Primary MI2S Playback";
+
+ codec {
+ sound-dai = <&spk_amp_l>, <&spk_amp_r>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ dp0-dai-link {
+ link-name = "DP0 Playback";
+
+ codec {
+ sound-dai = <&mdss_dp0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay = <200>;
+
+ trips {
+ cpuss0_active0: cpu-active0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss0_active1: cpu-active1 {
+ temperature = <55000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss0_active2: cpu-active2 {
+ temperature = <60000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss0_active3: cpu-active3 {
+ temperature = <65000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss0_active4: cpu-active4 {
+ temperature = <70000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss0_active5: cpu-active5 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss0_active6: cpu-active6 {
+ temperature = <80000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss0_active7: cpu-active7 {
+ temperature = <85000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ cooling-device = <&pwm_fan 0 1>;
+ trip = <&cpuss0_active0>;
+ };
+
+ map1 {
+ cooling-device = <&pwm_fan 1 2>;
+ trip = <&cpuss0_active1>;
+ };
+
+ map2 {
+ cooling-device = <&pwm_fan 2 3>;
+ trip = <&cpuss0_active2>;
+ };
+
+ map3 {
+ cooling-device = <&pwm_fan 3 4>;
+ trip = <&cpuss0_active3>;
+ };
+
+ map4 {
+ cooling-device = <&pwm_fan 4 5>;
+ trip = <&cpuss0_active4>;
+ };
+
+ map5 {
+ cooling-device = <&pwm_fan 5 6>;
+ trip = <&cpuss0_active5>;
+ };
+
+ map6 {
+ cooling-device = <&pwm_fan 6 7>;
+ trip = <&cpuss0_active6>;
+ };
+
+ map7 {
+ cooling-device = <&pwm_fan 7 8>;
+ trip = <&cpuss0_active7>;
+ };
+ };
+ };
+
+ cpu3-bottom-thermal {
+ polling-delay = <200>;
+
+ trips {
+ cpuss3_active0: cpu-active0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss3_active1: cpu-active1 {
+ temperature = <55000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss3_active2: cpu-active2 {
+ temperature = <60000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss3_active3: cpu-active3 {
+ temperature = <65000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss3_active4: cpu-active4 {
+ temperature = <70000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss3_active5: cpu-active5 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss3_active6: cpu-active6 {
+ temperature = <80000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss3_active7: cpu-active7 {
+ temperature = <85000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ cooling-device = <&pwm_fan 0 1>;
+ trip = <&cpuss3_active0>;
+ };
+
+ map1 {
+ cooling-device = <&pwm_fan 1 2>;
+ trip = <&cpuss3_active1>;
+ };
+
+ map2 {
+ cooling-device = <&pwm_fan 2 3>;
+ trip = <&cpuss3_active2>;
+ };
+
+ map3 {
+ cooling-device = <&pwm_fan 3 4>;
+ trip = <&cpuss3_active3>;
+ };
+
+ map4 {
+ cooling-device = <&pwm_fan 4 5>;
+ trip = <&cpuss3_active4>;
+ };
+
+ map5 {
+ cooling-device = <&pwm_fan 5 6>;
+ trip = <&cpuss3_active5>;
+ };
+
+ map6 {
+ cooling-device = <&pwm_fan 6 7>;
+ trip = <&cpuss3_active6>;
+ };
+
+ map7 {
+ cooling-device = <&pwm_fan 7 8>;
+ trip = <&cpuss3_active7>;
+ };
+ };
+ };
+
+ cpu7-bottom-thermal {
+ polling-delay = <200>;
+
+ trips {
+ cpuss7_active0: cpu-active0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss7_active1: cpu-active1 {
+ temperature = <55000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss7_active2: cpu-active2 {
+ temperature = <60000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss7_active3: cpu-active3 {
+ temperature = <65000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss7_active4: cpu-active4 {
+ temperature = <70000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss7_active5: cpu-active5 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss7_active6: cpu-active6 {
+ temperature = <80000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ cpuss7_active7: cpu-active7 {
+ temperature = <85000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ cooling-device = <&pwm_fan 0 1>;
+ trip = <&cpuss7_active0>;
+ };
+
+ map1 {
+ cooling-device = <&pwm_fan 1 2>;
+ trip = <&cpuss7_active1>;
+ };
+
+ map2 {
+ cooling-device = <&pwm_fan 2 3>;
+ trip = <&cpuss7_active2>;
+ };
+
+ map3 {
+ cooling-device = <&pwm_fan 3 4>;
+ trip = <&cpuss7_active3>;
+ };
+
+ map4 {
+ cooling-device = <&pwm_fan 4 5>;
+ trip = <&cpuss7_active4>;
+ };
+
+ map5 {
+ cooling-device = <&pwm_fan 5 6>;
+ trip = <&cpuss7_active5>;
+ };
+
+ map6 {
+ cooling-device = <&pwm_fan 6 7>;
+ trip = <&cpuss7_active6>;
+ };
+
+ map7 {
+ cooling-device = <&pwm_fan 7 8>;
+ trip = <&cpuss7_active7>;
+ };
+ };
+ };
+
+ gpuss-0-thermal {
+ polling-delay = <200>;
+
+ trips {
+ gpuss0_active0: gpu-active0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ gpuss0_active1: gpu-active1 {
+ temperature = <55000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ gpuss0_active2: gpu-active2 {
+ temperature = <60000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ gpuss0_active3: gpu-active3 {
+ temperature = <65000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ gpuss0_active4: gpu-active4 {
+ temperature = <70000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ gpuss0_active5: gpu-active5 {
+ temperature = <75000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ gpuss0_active6: gpu-active6 {
+ temperature = <80000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+
+ gpuss0_active7: gpu-active7 {
+ temperature = <85000>;
+ hysteresis = <4000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ cooling-device = <&pwm_fan 0 1>;
+ trip = <&gpuss0_active0>;
+ };
+
+ map1 {
+ cooling-device = <&pwm_fan 1 2>;
+ trip = <&gpuss0_active1>;
+ };
+
+ map2 {
+ cooling-device = <&pwm_fan 2 3>;
+ trip = <&gpuss0_active2>;
+ };
+
+ map3 {
+ cooling-device = <&pwm_fan 3 4>;
+ trip = <&gpuss0_active3>;
+ };
+
+ map4 {
+ cooling-device = <&pwm_fan 4 5>;
+ trip = <&gpuss0_active4>;
+ };
+
+ map5 {
+ cooling-device = <&pwm_fan 5 6>;
+ trip = <&gpuss0_active5>;
+ };
+
+ map6 {
+ cooling-device = <&pwm_fan 6 7>;
+ trip = <&gpuss0_active6>;
+ };
+
+ map7 {
+ cooling-device = <&pwm_fan 7 8>;
+ trip = <&gpuss0_active7>;
+ };
+ };
+ };
+ };
+
+ usb0-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 140 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 141 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb0_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb0_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu>;
+ };
+ };
+ };
+
+ vdd_fan_5v0: vdd-fan-5v0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_fan_5v0";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&fan_pwr_active>;
+ pinctrl-names = "default";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_mcu_3v3: vdd-mcu-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_mcu_3v3";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9385-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
+ 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
+ pinctrl-names = "default";
+
+ wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_s5g_0p8>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddaon-supply = <&vreg_s2g_0p8>;
+ vdddig-supply = <&vreg_s4e_0p95>;
+ vddrfa1p2-supply = <&vreg_s4g_1p3>;
+ vddrfa1p8-supply = <&vreg_s6g_1p8>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+
+ // The arch_timer label is unused here, but is required by ABL to apply a dtbo
+ arch_timer: timer { };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l3-supply = <&vreg_s4g_1p3>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob1>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l11-supply = <&vreg_s4g_1p3>;
+ vdd-l12-supply = <&vreg_s6g_1p8>;
+ vdd-l15-supply = <&vreg_s6g_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2720000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p1: ldo5 {
+ regulator-name = "vreg_l5b_3p1";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_1p8: ldo7 {
+ regulator-name = "vreg_l7b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_1p8: ldo8 {
+ regulator-name = "vreg_l8b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p2: ldo11 {
+ regulator-name = "vreg_l11b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p8: ldo12 {
+ regulator-name = "vreg_l12b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p2: ldo14 {
+ regulator-name = "vreg_l14b_3p2";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p8: ldo16 {
+ regulator-name = "vreg_l16b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s4g_1p3>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+
+ vreg_l3c_0p9: ldo3 {
+ regulator-name = "vreg_l3c_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+
+ vreg_l1d_0p88: ldo1 {
+ regulator-name = "vreg_l1d_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4g_1p3>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s4e_0p95: smps4 {
+ regulator-name = "vreg_s4e_0p95";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5e_1p08: smps5 {
+ regulator-name = "vreg_s5e_1p08";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1e_0p88: ldo1 {
+ regulator-name = "vreg_l1e_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2e_0p9: ldo2 {
+ regulator-name = "vreg_l2e_0p9";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4f_0p5: smps4 {
+ regulator-name = "vreg_s4f_0p5";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_0p9: ldo1 {
+ regulator-name = "vreg_l1f_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_0p88: ldo2 {
+ regulator-name = "vreg_l2f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_0p88: ldo3 {
+ regulator-name = "vreg_l3f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "g";
+
+ vdd-l1-supply = <&vreg_s4g_1p3>;
+ vdd-l2-supply = <&vreg_s4g_1p3>;
+ vdd-l3-supply = <&vreg_s4g_1p3>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+
+ vreg_s1g_1p2: smps1 {
+ regulator-name = "vreg_s1g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2g_0p8: smps2 {
+ regulator-name = "vreg_s2g_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3g_0p7: smps3 {
+ regulator-name = "vreg_s3g_0p7";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4g_1p3: smps4 {
+ regulator-name = "vreg_s4g_1p3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5g_0p8: smps5 {
+ regulator-name = "vreg_s5g_0p8";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6g_1p8: smps6 {
+ regulator-name = "vreg_s6g_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1g_1p2: ldo1 {
+ regulator-name = "vreg_l1g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3g_1p2: ldo3 {
+ regulator-name = "vreg_l3g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/sm8550/a740_zap.mbn";
+};
+
+&i2c_master_hub_0 {
+ status = "okay";
+};
+
+&i2c_hub_2 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ spk_amp_l: amplifier@34 {
+ compatible = "awinic,aw88166";
+ reg = <0x34>;
+ #sound-dai-cells = <0>;
+ reset-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>;
+ awinic,audio-channel = <0>;
+ awinic,sync-flag;
+ sound-name-prefix = "SPK_L";
+ };
+
+ spk_amp_r: amplifier@35 {
+ compatible = "awinic,aw88166";
+ reg = <0x35>;
+ #sound-dai-cells = <0>;
+ reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+ awinic,audio-channel = <1>;
+ awinic,sync-flag;
+ sound-name-prefix = "SPK_R";
+ };
+};
+
+&iris {
+ status = "okay";
+};
+
+&lpass_tlmm {
+ lpi_i2s3_active: lpi_i2s3-active-state {
+ sck-pins {
+ pins = "gpio12";
+ function = "i2s3_clk";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ ws-pins {
+ pins = "gpio13";
+ function = "i2s3_ws";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ data0-pins {
+ pins = "gpio17";
+ function = "i2s3_data";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ data1-pins {
+ pins = "gpio18";
+ function = "i2s3_data";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&lpass_vamacro {
+ qcom,dmic-sample-rate = <4800000>;
+};
+
+&lpass_wsamacro {
+ status = "disabled";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dsi1 {
+ vdda-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+
+ display_panel: panel@0 {
+ reg = <0>;
+
+ port {
+ panel1_in: endpoint {
+ remote-endpoint = <&mdss_dsi1_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi1_out {
+ remote-endpoint = <&panel1_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi1_phy {
+ vdds-supply = <&vreg_l1e_0p88>;
+
+ status = "okay";
+};
+
+&pcie0 {
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcieport0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l1e_0p88>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pm8550_gpios {
+ fan_pwm_active: fan-pwm-active-state {
+ pins = "gpio8";
+ function = "func1";
+ input-disable;
+ output-enable;
+ output-low;
+ bias-disable;
+ power-source = <1>;
+ };
+
+ sdc2_card_det_n: sdc2-card-det-n-state {
+ pins = "gpio12";
+ function = "normal";
+ input-enable;
+ output-disable;
+ bias-pull-up;
+ power-source = <1>;
+ };
+
+ volume_up_n: volume-up-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pm8550_pwm {
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
+&pm8550b_eusb2_repeater {
+ qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
+ qcom,tune-usb2-amplitude = /bits/ 8 <0xb>;
+ qcom,tune-usb2-preem = /bits/ 8 <0x3>;
+ vdd18-supply = <&vreg_l15b_1p8>;
+ vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pmk8550_gpios {
+ pmk8550_sleep_clk: sleep-clk-state {
+ pins = "gpio3";
+ function = "func1";
+ input-disable;
+ output-enable;
+ bias-disable;
+ power-source = <0>;
+ };
+
+ pwm_backlight_default: pwm-backlight-default-state {
+ pins = "gpio5";
+ function = "func3";
+ input-disable;
+ output-low;
+ output-enable;
+ bias-disable;
+ power-source = <0>;
+ qcom,drive-strength = <2>;
+ };
+};
+
+&pmk8550_rtc {
+ nvmem-cells = <&rtc_offset>;
+ nvmem-cell-names = "offset";
+};
+
+&pmk8550_sdam_2 {
+ rtc_offset: rtc-offset@bc {
+ reg = <0xbc 0x4>;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm8550/ayntec/cdsp.mbn",
+ "qcom/sm8550/ayntec/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+ vmmc-supply = <&vreg_l9b_2p9>;
+ vqmmc-supply = <&vreg_l8b_1p8>;
+ no-sdio;
+ no-mmc;
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32764>;
+};
+
+&swr1 {
+ status = "okay";
+
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <32 8>;
+
+ mcu_en_active: mcu-en-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ fan_int: fan-int-state {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ ts_s_rst_default: ts-s-rst-default-state {
+ pins = "gpio14";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ ts_s_rst_sleep: ts-s-rst-sleep-state {
+ pins = "gpio14";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ ts_s_int_default: ts-s-int-default-state {
+ pins = "gpio15";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ ts_s_int_sleep: ts-s-int-sleep-state {
+ pins = "gpio15";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ ts_p_rst_default: ts-p-rst-default-state {
+ pins = "gpio24";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ ts_p_rst_sleep: ts-p-rst-sleep-state {
+ pins = "gpio24";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ ts_p_int_default: ts-p-int-default-state {
+ pins = "gpio25";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ ts_p_int_sleep: ts-p-int-sleep-state {
+ pins = "gpio25";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ wlan_en: wlan-en-state {
+ pins = "gpio80";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ bt_default: bt-default-state {
+ bt-en-pins {
+ pins = "gpio81";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ sw-ctrl-pins {
+ pins = "gpio82";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
+ dsi_p_te_active: dsi-p-te-active-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ dsi_p_te_suspend: dsi-s-te-suspend-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ dsi_s_te_active: dsi-s-te-active-state {
+ pins = "gpio87";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ dsi_s_te_suspend: dsi-s-te-suspend-state {
+ pins = "gpio87";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio108";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ fan_pwr_active: fan-pwr-active-state {
+ pins = "gpio109";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ dsi_p_rst_active: dsi-p-rst-active-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ dsi_p_rst_suspend: dsi-p-rst-suspend-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ dsi_s_rst_active: dsi-s-rst-active-state {
+ pins = "gpio137";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ dsi_s_rst_suspend: dsi-s-rst-suspend-state {
+ pins = "gpio137";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ usb0_sbu_default: usb0-sbu-state {
+ oe-n-pins {
+ pins = "gpio140";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ output-high;
+ };
+
+ sel-pins {
+ pins = "gpio141";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+ max-speed = <3200000>;
+ };
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1g_1p2>;
+ vccq-max-microamp = <1200000>;
+ vdd-hba-supply = <&vreg_l3g_1p2>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1d_0p88>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+ phys = <&pm8550b_eusb2_repeater>;
+
+ vdd-supply = <&vreg_l1e_0p88>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3f_0p88>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
--
2.53.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common
2026-03-23 16:27 ` [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common Aaron Kling via B4 Relay
@ 2026-03-24 12:35 ` Konrad Dybcio
2026-03-27 21:26 ` Aaron Kling
0 siblings, 1 reply; 20+ messages in thread
From: Konrad Dybcio @ 2026-03-24 12:35 UTC (permalink / raw)
To: webgeek1234, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Teguh Sobirin
On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
> From: Teguh Sobirin <teguh@sobir.in>
>
> This contains everything common between the AYN QCS8550 devices. It will
> be included by device specific dts'.
>
> Signed-off-by: Teguh Sobirin <teguh@sobir.in>
> Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
[...]
> + sound {
> + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
> + pinctrl-0 = <&lpi_i2s3_active>;
> + pinctrl-names = "default";
> +
> + model = "AYN-Odin2";
Is this enough of a distinction? Do you need to make any changes to the
one with a HDMI bridge to get HDMI audio?
Konrad
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common
2026-03-24 12:35 ` Konrad Dybcio
@ 2026-03-27 21:26 ` Aaron Kling
2026-03-30 11:00 ` Konrad Dybcio
0 siblings, 1 reply; 20+ messages in thread
From: Aaron Kling @ 2026-03-27 21:26 UTC (permalink / raw)
To: Konrad Dybcio
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
Teguh Sobirin
On Tue, Mar 24, 2026 at 7:36 AM Konrad Dybcio
<konrad.dybcio@oss.qualcomm.com> wrote:
>
> On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
> > From: Teguh Sobirin <teguh@sobir.in>
> >
> > This contains everything common between the AYN QCS8550 devices. It will
> > be included by device specific dts'.
> >
> > Signed-off-by: Teguh Sobirin <teguh@sobir.in>
> > Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
> > Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> > ---
>
> [...]
>
> > + sound {
> > + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
> > + pinctrl-0 = <&lpi_i2s3_active>;
> > + pinctrl-names = "default";
> > +
> > + model = "AYN-Odin2";
>
> Is this enough of a distinction? Do you need to make any changes to the
> one with a HDMI bridge to get HDMI audio?
After this quesstion, I tried to verify hdmi and am unable to even get
the connector to come up. The lt8912b driver complains that the
connector doesn't support edid read. Which per the current connector
node is correct, none of the devices list a ddc node. I am trying to
investigate this further, but vendor source release unfortunately
appears to be missing pieces related to this. And no other current
qcom device uses this bridge to take a guess at which controller the
ddc is on.
On a related note, I'm not sure hdmi is covered in the audio topology.
What I'm using is here [0]. This is in a fork of the topology repo
with aosp build rules added. Speakers work, headphones out and in
work. DP works only with the pending q6dsp fixups series, which I
should probably narrow down and ask for a 6.18 backport for. The ucm
config [1] I'm basing tests on doesn't handle the built-in mic and I
haven't been able to figure that out yet, so that's also unknown.
Aaron
[0] https://github.com/LineageOS/android_hardware_qcom_audioreach-topology/blob/ad67f3777b1d4dec5289bc7117f2ec34521be7e6/AYN-Odin2.m4
[1] https://github.com/AYNTechnologies/alsa-ucm-conf/commit/d33738b93e9560e8d9e08a024cc84c8055bb7eb9
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common
2026-03-27 21:26 ` Aaron Kling
@ 2026-03-30 11:00 ` Konrad Dybcio
2026-03-30 11:01 ` Konrad Dybcio
2026-03-30 11:32 ` Dmitry Baryshkov
0 siblings, 2 replies; 20+ messages in thread
From: Konrad Dybcio @ 2026-03-30 11:00 UTC (permalink / raw)
To: Aaron Kling
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
Teguh Sobirin
On 3/27/26 10:26 PM, Aaron Kling wrote:
> On Tue, Mar 24, 2026 at 7:36 AM Konrad Dybcio
> <konrad.dybcio@oss.qualcomm.com> wrote:
>>
>> On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
>>> From: Teguh Sobirin <teguh@sobir.in>
>>>
>>> This contains everything common between the AYN QCS8550 devices. It will
>>> be included by device specific dts'.
>>>
>>> Signed-off-by: Teguh Sobirin <teguh@sobir.in>
>>> Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
>>> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
>>> ---
>>
>> [...]
>>
>>> + sound {
>>> + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
>>> + pinctrl-0 = <&lpi_i2s3_active>;
>>> + pinctrl-names = "default";
>>> +
>>> + model = "AYN-Odin2";
>>
>> Is this enough of a distinction? Do you need to make any changes to the
>> one with a HDMI bridge to get HDMI audio?
>
> After this quesstion, I tried to verify hdmi and am unable to even get
> the connector to come up. The lt8912b driver complains that the
> connector doesn't support edid read. Which per the current connector
> node is correct, none of the devices list a ddc node. I am trying to
> investigate this further, but vendor source release unfortunately
> appears to be missing pieces related to this. And no other current
> qcom device uses this bridge to take a guess at which controller the
> ddc is on.
Go through the I2C buses that are enabled on the vendor kernel and try
inspecting them with toos like i2cdetect
>
> On a related note, I'm not sure hdmi is covered in the audio topology.
Since this is a DSI bridge, I'd imagine it needs a separate connection
to the SoC's sound hardware. We've had similar occurences in the past,
e.g. this on the SM8250 RB5 board (qrb5165-rb5.dts):
https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/Qualcomm/sm8250/HDMI.conf
Maybe +Dmitry could help you out
Konrad
> What I'm using is here [0]. This is in a fork of the topology repo
> with aosp build rules added. Speakers work, headphones out and in
> work. DP works only with the pending q6dsp fixups series, which I
> should probably narrow down and ask for a 6.18 backport for. The ucm
> config [1] I'm basing tests on doesn't handle the built-in mic and I
> haven't been able to figure that out yet, so that's also unknown.
>
> Aaron
>
> [0] https://github.com/LineageOS/android_hardware_qcom_audioreach-topology/blob/ad67f3777b1d4dec5289bc7117f2ec34521be7e6/AYN-Odin2.m4
> [1] https://github.com/AYNTechnologies/alsa-ucm-conf/commit/d33738b93e9560e8d9e08a024cc84c8055bb7eb9
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common
2026-03-30 11:00 ` Konrad Dybcio
@ 2026-03-30 11:01 ` Konrad Dybcio
2026-03-30 11:32 ` Dmitry Baryshkov
1 sibling, 0 replies; 20+ messages in thread
From: Konrad Dybcio @ 2026-03-30 11:01 UTC (permalink / raw)
To: Aaron Kling, Dmitry Baryshkov
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
Teguh Sobirin
On 3/30/26 1:00 PM, Konrad Dybcio wrote:
> On 3/27/26 10:26 PM, Aaron Kling wrote:
>> On Tue, Mar 24, 2026 at 7:36 AM Konrad Dybcio
>> <konrad.dybcio@oss.qualcomm.com> wrote:
>>>
>>> On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
>>>> From: Teguh Sobirin <teguh@sobir.in>
>>>>
>>>> This contains everything common between the AYN QCS8550 devices. It will
>>>> be included by device specific dts'.
>>>>
>>>> Signed-off-by: Teguh Sobirin <teguh@sobir.in>
>>>> Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
>>>> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
>>>> ---
>>>
>>> [...]
>>>
>>>> + sound {
>>>> + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
>>>> + pinctrl-0 = <&lpi_i2s3_active>;
>>>> + pinctrl-names = "default";
>>>> +
>>>> + model = "AYN-Odin2";
>>>
>>> Is this enough of a distinction? Do you need to make any changes to the
>>> one with a HDMI bridge to get HDMI audio?
>>
>> After this quesstion, I tried to verify hdmi and am unable to even get
>> the connector to come up. The lt8912b driver complains that the
>> connector doesn't support edid read. Which per the current connector
>> node is correct, none of the devices list a ddc node. I am trying to
>> investigate this further, but vendor source release unfortunately
>> appears to be missing pieces related to this. And no other current
>> qcom device uses this bridge to take a guess at which controller the
>> ddc is on.
>
> Go through the I2C buses that are enabled on the vendor kernel and try
> inspecting them with toos like i2cdetect
>
>>
>> On a related note, I'm not sure hdmi is covered in the audio topology.
>
> Since this is a DSI bridge, I'd imagine it needs a separate connection
> to the SoC's sound hardware. We've had similar occurences in the past,
> e.g. this on the SM8250 RB5 board (qrb5165-rb5.dts):
>
> https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/Qualcomm/sm8250/HDMI.conf
>
> Maybe +Dmitry could help you out
(mentions work better when you actually add the people you intended to
- fixing that)
>
> Konrad
>
>> What I'm using is here [0]. This is in a fork of the topology repo
>> with aosp build rules added. Speakers work, headphones out and in
>> work. DP works only with the pending q6dsp fixups series, which I
>> should probably narrow down and ask for a 6.18 backport for. The ucm
>> config [1] I'm basing tests on doesn't handle the built-in mic and I
>> haven't been able to figure that out yet, so that's also unknown.
>>
>> Aaron
>>
>> [0] https://github.com/LineageOS/android_hardware_qcom_audioreach-topology/blob/ad67f3777b1d4dec5289bc7117f2ec34521be7e6/AYN-Odin2.m4
>> [1] https://github.com/AYNTechnologies/alsa-ucm-conf/commit/d33738b93e9560e8d9e08a024cc84c8055bb7eb9
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common
2026-03-30 11:00 ` Konrad Dybcio
2026-03-30 11:01 ` Konrad Dybcio
@ 2026-03-30 11:32 ` Dmitry Baryshkov
2026-04-02 22:04 ` Aaron Kling
1 sibling, 1 reply; 20+ messages in thread
From: Dmitry Baryshkov @ 2026-03-30 11:32 UTC (permalink / raw)
To: Konrad Dybcio
Cc: Aaron Kling, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel, Teguh Sobirin
On Mon, Mar 30, 2026 at 01:00:55PM +0200, Konrad Dybcio wrote:
> On 3/27/26 10:26 PM, Aaron Kling wrote:
> > On Tue, Mar 24, 2026 at 7:36 AM Konrad Dybcio
> > <konrad.dybcio@oss.qualcomm.com> wrote:
> >>
> >> On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
> >>> From: Teguh Sobirin <teguh@sobir.in>
> >>>
> >>> This contains everything common between the AYN QCS8550 devices. It will
> >>> be included by device specific dts'.
> >>>
> >>> Signed-off-by: Teguh Sobirin <teguh@sobir.in>
> >>> Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
> >>> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> >>> ---
> >>
> >> [...]
> >>
> >>> + sound {
> >>> + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
> >>> + pinctrl-0 = <&lpi_i2s3_active>;
> >>> + pinctrl-names = "default";
> >>> +
> >>> + model = "AYN-Odin2";
> >>
> >> Is this enough of a distinction? Do you need to make any changes to the
> >> one with a HDMI bridge to get HDMI audio?
> >
> > After this quesstion, I tried to verify hdmi and am unable to even get
> > the connector to come up. The lt8912b driver complains that the
> > connector doesn't support edid read.
Looking at the driver, please drop lt8912_bridge_edid_read(),
lt8912_bridge_detect() and lt->bridge.ops assignment. Those bits are
lame and useless.
> Which per the current connector
> > node is correct, none of the devices list a ddc node. I am trying to
> > investigate this further, but vendor source release unfortunately
> > appears to be missing pieces related to this. And no other current
> > qcom device uses this bridge to take a guess at which controller the
> > ddc is on.
>
> Go through the I2C buses that are enabled on the vendor kernel and try
> inspecting them with toos like i2cdetect
I'd second this suggestion. The chip doesn't support EDID reading, so it
is (hopefully) handled via some existing bus. Does downstream handle
EDID / HDMI at all?
>
> >
> > On a related note, I'm not sure hdmi is covered in the audio topology.
>
> Since this is a DSI bridge, I'd imagine it needs a separate connection
> to the SoC's sound hardware. We've had similar occurences in the past,
> e.g. this on the SM8250 RB5 board (qrb5165-rb5.dts):
Yes. Unfortunately, the driver doesn't seem to implement audio support.
I'd suggest pinging Lontium for the information regarding InfoFrame and
audio bits programming.
>
> https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/Qualcomm/sm8250/HDMI.conf
>
> Maybe +Dmitry could help you out
>
> Konrad
>
> > What I'm using is here [0]. This is in a fork of the topology repo
> > with aosp build rules added. Speakers work, headphones out and in
> > work. DP works only with the pending q6dsp fixups series, which I
> > should probably narrow down and ask for a 6.18 backport for. The ucm
> > config [1] I'm basing tests on doesn't handle the built-in mic and I
> > haven't been able to figure that out yet, so that's also unknown.
> >
> > Aaron
> >
> > [0] https://github.com/LineageOS/android_hardware_qcom_audioreach-topology/blob/ad67f3777b1d4dec5289bc7117f2ec34521be7e6/AYN-Odin2.m4
> > [1] https://github.com/AYNTechnologies/alsa-ucm-conf/commit/d33738b93e9560e8d9e08a024cc84c8055bb7eb9
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common
2026-03-30 11:32 ` Dmitry Baryshkov
@ 2026-04-02 22:04 ` Aaron Kling
2026-04-07 9:20 ` Konrad Dybcio
0 siblings, 1 reply; 20+ messages in thread
From: Aaron Kling @ 2026-04-02 22:04 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Konrad Dybcio, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
linux-kernel, Teguh Sobirin
On Mon, Mar 30, 2026 at 6:32 AM Dmitry Baryshkov
<dmitry.baryshkov@oss.qualcomm.com> wrote:
>
> On Mon, Mar 30, 2026 at 01:00:55PM +0200, Konrad Dybcio wrote:
> > On 3/27/26 10:26 PM, Aaron Kling wrote:
> > > On Tue, Mar 24, 2026 at 7:36 AM Konrad Dybcio
> > > <konrad.dybcio@oss.qualcomm.com> wrote:
> > >>
> > >> On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
> > >>> From: Teguh Sobirin <teguh@sobir.in>
> > >>>
> > >>> This contains everything common between the AYN QCS8550 devices. It will
> > >>> be included by device specific dts'.
> > >>>
> > >>> Signed-off-by: Teguh Sobirin <teguh@sobir.in>
> > >>> Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
> > >>> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> > >>> ---
> > >>
> > >> [...]
> > >>
> > >>> + sound {
> > >>> + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
> > >>> + pinctrl-0 = <&lpi_i2s3_active>;
> > >>> + pinctrl-names = "default";
> > >>> +
> > >>> + model = "AYN-Odin2";
> > >>
> > >> Is this enough of a distinction? Do you need to make any changes to the
> > >> one with a HDMI bridge to get HDMI audio?
> > >
> > > After this quesstion, I tried to verify hdmi and am unable to even get
> > > the connector to come up. The lt8912b driver complains that the
> > > connector doesn't support edid read.
>
> Looking at the driver, please drop lt8912_bridge_edid_read(),
> lt8912_bridge_detect() and lt->bridge.ops assignment. Those bits are
> lame and useless.
>
> > Which per the current connector
> > > node is correct, none of the devices list a ddc node. I am trying to
> > > investigate this further, but vendor source release unfortunately
> > > appears to be missing pieces related to this. And no other current
> > > qcom device uses this bridge to take a guess at which controller the
> > > ddc is on.
> >
> > Go through the I2C buses that are enabled on the vendor kernel and try
> > inspecting them with toos like i2cdetect
>
> I'd second this suggestion. The chip doesn't support EDID reading, so it
> is (hopefully) handled via some existing bus. Does downstream handle
> EDID / HDMI at all?
I have been unable to get the stock OS to display anything on hdmi at
all. The downstream kernel reports the head as DSI, and is hardcoded
to a 1920x1080 mode in the kernel dt. We have been unable to find any
kernel handling of this bridge at all for downstream, in the source
release or the prebuilt kernel shipped with the stock OS. Best I can
tell, they just hardcode the one mode and nothing else will work.
There are reports of hdmi audio working, though; which I'm not sure
how if the bridge has no kernel driver at all.
All i2c nodes used by downstream are already enabled. And when an hdmi
cable is plugged in, I never see the ddc address, 0x50 if I understand
correctly, show up on any of them. I tried enabling other i2c nodes to
check if anything shows up on them, but that causes kernel panics
during boot and without uart, I can't see why.
This all seems rather broken, perhaps by odm design. Given this state,
should I just drop all references to hdmi and leave a comment in the
dts where the bridge should be to explain why?
> >
> > >
> > > On a related note, I'm not sure hdmi is covered in the audio topology.
> >
> > Since this is a DSI bridge, I'd imagine it needs a separate connection
> > to the SoC's sound hardware. We've had similar occurences in the past,
> > e.g. this on the SM8250 RB5 board (qrb5165-rb5.dts):
>
> Yes. Unfortunately, the driver doesn't seem to implement audio support.
> I'd suggest pinging Lontium for the information regarding InfoFrame and
> audio bits programming.
>
> >
> > https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/Qualcomm/sm8250/HDMI.conf
> >
> > Maybe +Dmitry could help you out
> >
> > Konrad
> >
> > > What I'm using is here [0]. This is in a fork of the topology repo
> > > with aosp build rules added. Speakers work, headphones out and in
> > > work. DP works only with the pending q6dsp fixups series, which I
> > > should probably narrow down and ask for a 6.18 backport for. The ucm
> > > config [1] I'm basing tests on doesn't handle the built-in mic and I
> > > haven't been able to figure that out yet, so that's also unknown.
> > >
> > > Aaron
> > >
> > > [0] https://github.com/LineageOS/android_hardware_qcom_audioreach-topology/blob/ad67f3777b1d4dec5289bc7117f2ec34521be7e6/AYN-Odin2.m4
> > > [1] https://github.com/AYNTechnologies/alsa-ucm-conf/commit/d33738b93e9560e8d9e08a024cc84c8055bb7eb9
>
> --
> With best wishes
> Dmitry
Aaron
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common
2026-04-02 22:04 ` Aaron Kling
@ 2026-04-07 9:20 ` Konrad Dybcio
0 siblings, 0 replies; 20+ messages in thread
From: Konrad Dybcio @ 2026-04-07 9:20 UTC (permalink / raw)
To: Aaron Kling, Dmitry Baryshkov
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
Teguh Sobirin
On 4/3/26 12:04 AM, Aaron Kling wrote:
> On Mon, Mar 30, 2026 at 6:32 AM Dmitry Baryshkov
> <dmitry.baryshkov@oss.qualcomm.com> wrote:
>>
>> On Mon, Mar 30, 2026 at 01:00:55PM +0200, Konrad Dybcio wrote:
>>> On 3/27/26 10:26 PM, Aaron Kling wrote:
>>>> On Tue, Mar 24, 2026 at 7:36 AM Konrad Dybcio
>>>> <konrad.dybcio@oss.qualcomm.com> wrote:
>>>>>
>>>>> On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
>>>>>> From: Teguh Sobirin <teguh@sobir.in>
>>>>>>
>>>>>> This contains everything common between the AYN QCS8550 devices. It will
>>>>>> be included by device specific dts'.
>>>>>>
>>>>>> Signed-off-by: Teguh Sobirin <teguh@sobir.in>
>>>>>> Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
>>>>>> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
>>>>>> ---
>>>>>
>>>>> [...]
>>>>>
>>>>>> + sound {
>>>>>> + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
>>>>>> + pinctrl-0 = <&lpi_i2s3_active>;
>>>>>> + pinctrl-names = "default";
>>>>>> +
>>>>>> + model = "AYN-Odin2";
>>>>>
>>>>> Is this enough of a distinction? Do you need to make any changes to the
>>>>> one with a HDMI bridge to get HDMI audio?
>>>>
>>>> After this quesstion, I tried to verify hdmi and am unable to even get
>>>> the connector to come up. The lt8912b driver complains that the
>>>> connector doesn't support edid read.
>>
>> Looking at the driver, please drop lt8912_bridge_edid_read(),
>> lt8912_bridge_detect() and lt->bridge.ops assignment. Those bits are
>> lame and useless.
>>
>>> Which per the current connector
>>>> node is correct, none of the devices list a ddc node. I am trying to
>>>> investigate this further, but vendor source release unfortunately
>>>> appears to be missing pieces related to this. And no other current
>>>> qcom device uses this bridge to take a guess at which controller the
>>>> ddc is on.
>>>
>>> Go through the I2C buses that are enabled on the vendor kernel and try
>>> inspecting them with toos like i2cdetect
>>
>> I'd second this suggestion. The chip doesn't support EDID reading, so it
>> is (hopefully) handled via some existing bus. Does downstream handle
>> EDID / HDMI at all?
>
> I have been unable to get the stock OS to display anything on hdmi at
> all. The downstream kernel reports the head as DSI, and is hardcoded
> to a 1920x1080 mode in the kernel dt. We have been unable to find any
> kernel handling of this bridge at all for downstream, in the source
> release or the prebuilt kernel shipped with the stock OS. Best I can
> tell, they just hardcode the one mode and nothing else will work.
> There are reports of hdmi audio working, though; which I'm not sure
> how if the bridge has no kernel driver at all.
>
> All i2c nodes used by downstream are already enabled. And when an hdmi
> cable is plugged in, I never see the ddc address, 0x50 if I understand
> correctly, show up on any of them. I tried enabling other i2c nodes to
> check if anything shows up on them, but that causes kernel panics
> during boot and without uart, I can't see why.
>
> This all seems rather broken, perhaps by odm design. Given this state,
> should I just drop all references to hdmi and leave a comment in the
> dts where the bridge should be to explain why?
That's definitely better than describing (for all we know) broken hw
We can always come back to that if a fix is found
Konrad
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 4/6] arm64: dts: qcom: Add AYN Odin 2 Mini
2026-03-23 16:27 [PATCH v4 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices Aaron Kling via B4 Relay
` (2 preceding siblings ...)
2026-03-23 16:27 ` [PATCH v4 3/6] arm64: dts: qcom: Add AYN QCS8550 Common Aaron Kling via B4 Relay
@ 2026-03-23 16:27 ` Aaron Kling via B4 Relay
2026-03-24 12:36 ` Konrad Dybcio
2026-03-23 16:27 ` [PATCH v4 5/6] arm64: dts: qcom: Add AYN Odin 2 Portal Aaron Kling via B4 Relay
2026-03-23 16:27 ` [PATCH v4 6/6] arm64: dts: qcom: Add AYN Thor Aaron Kling via B4 Relay
5 siblings, 1 reply; 20+ messages in thread
From: Aaron Kling via B4 Relay @ 2026-03-23 16:27 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Aaron Kling,
Teguh Sobirin
From: Teguh Sobirin <teguh@sobir.in>
The AYN Odin 2 Mini is a high-performance Android-based handheld gaming
console powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring a
5-inch mini-led touchscreen.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/qcs8550-ayntec-odin2mini.dts | 140 +++++++++++++++++++++
2 files changed, 141 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2349cd200a61cebee9e8739422a226cd75ded3be..da534d839084ba60bc794b8f420baf06bcbfc6d8 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -171,6 +171,7 @@ qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride-el2.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2mini.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2mini.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2mini.dts
new file mode 100644
index 0000000000000000000000000000000000000000..c2a1b85b66e314e277181f0036a0988060368243
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2mini.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "qcs8550-ayntec-common.dtsi"
+
+&{/} {
+ model = "AYN Odin 2 Mini";
+ compatible = "ayntec,odin2mini", "qcom,qcs8550", "qcom,sm8550";
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "d";
+ hpd-gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+ hdmi-pwr-supply = <&vdd_hdmi_1v8>;
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <<8912_out>;
+ };
+ };
+ };
+
+ vcc_hdmi_1v8: vcc-hdmi-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_hdmi_1v8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_disp_2v8: vdd-disp-2v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_disp_2v8";
+
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_hdmi_1v8: vdd-hdmi-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_hdmi_1v8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&i2c_hub_0 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lt8912_codec: hdmi-bridge@48 {
+ compatible = "lontium,lt8912b";
+ reg = <0x48> ;
+
+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+ vdd-supply = <&vdd_hdmi_1v8>;
+ vccmipirx-supply = <&vcc_hdmi_1v8>;
+ vccsysclk-supply = <&vcc_hdmi_1v8>;
+ vcclvdstx-supply = <&vcc_hdmi_1v8>;
+ vcchdmitx-supply = <&vcc_hdmi_1v8>;
+ vcclvdspll-supply = <&vcc_hdmi_1v8>;
+ vcchdmipll-supply = <&vcc_hdmi_1v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_out_in: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lt8912_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&hdmi_out_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l1e_0p88>;
+
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8550/ayntec/odin2mini/adsp.mbn",
+ "qcom/sm8550/ayntec/odin2mini/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&spk_amp_l {
+ firmware-name = "qcom/sm8550/ayntec/odin2mini/aw883xx_acf.bin";
+};
+
+&spk_amp_r {
+ firmware-name = "qcom/sm8550/ayntec/odin2mini/aw883xx_acf.bin";
+};
+
--
2.53.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v4 4/6] arm64: dts: qcom: Add AYN Odin 2 Mini
2026-03-23 16:27 ` [PATCH v4 4/6] arm64: dts: qcom: Add AYN Odin 2 Mini Aaron Kling via B4 Relay
@ 2026-03-24 12:36 ` Konrad Dybcio
0 siblings, 0 replies; 20+ messages in thread
From: Konrad Dybcio @ 2026-03-24 12:36 UTC (permalink / raw)
To: webgeek1234, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Teguh Sobirin
On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
> From: Teguh Sobirin <teguh@sobir.in>
>
> The AYN Odin 2 Mini is a high-performance Android-based handheld gaming
> console powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring a
> 5-inch mini-led touchscreen.
>
> Signed-off-by: Teguh Sobirin <teguh@sobir.in>
> Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 5/6] arm64: dts: qcom: Add AYN Odin 2 Portal
2026-03-23 16:27 [PATCH v4 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices Aaron Kling via B4 Relay
` (3 preceding siblings ...)
2026-03-23 16:27 ` [PATCH v4 4/6] arm64: dts: qcom: Add AYN Odin 2 Mini Aaron Kling via B4 Relay
@ 2026-03-23 16:27 ` Aaron Kling via B4 Relay
2026-03-24 12:36 ` Konrad Dybcio
2026-03-23 16:27 ` [PATCH v4 6/6] arm64: dts: qcom: Add AYN Thor Aaron Kling via B4 Relay
5 siblings, 1 reply; 20+ messages in thread
From: Aaron Kling via B4 Relay @ 2026-03-23 16:27 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Aaron Kling,
Teguh Sobirin
From: Teguh Sobirin <teguh@sobir.in>
The AYN Odin 2 Portal is a high-performance Android-based handheld gaming
console powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring a
7-inch OLED touchscreen.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/qcs8550-ayntec-odin2portal.dts | 84 ++++++++++++++++++++++
2 files changed, 85 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index da534d839084ba60bc794b8f420baf06bcbfc6d8..5ed85a8843c5ac5cf943f9d0c40ad6da7cba219c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -172,6 +172,7 @@ qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride-el2.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2mini.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2portal.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2portal.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2portal.dts
new file mode 100644
index 0000000000000000000000000000000000000000..bd6ba0ab941d3325f76f53e7ed65478c67b9d028
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2portal.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "qcs8550-ayntec-common.dtsi"
+
+&{/} {
+ model = "AYN Odin 2 Portal";
+ compatible = "ayntec,odin2portal", "qcom,qcs8550", "qcom,sm8550";
+
+ vdd_bl_5v0: vdd-bl-5v0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_bl_5v0";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_disp_2v8: vdd-disp-2v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_disp_2v8";
+
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@38 {
+ compatible = "focaltech,ft5426";
+ reg = <0x38>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l14b_3p2>;
+ iovcc-supply = <&vreg_l12b_1p8>;
+
+ pinctrl-0 = <&ts_p_rst_default &ts_p_int_default>;
+ pinctrl-1 = <&ts_p_rst_sleep &ts_p_int_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ touchscreen-swapped-x-y;
+ touchscreen-inverted-y;
+ };
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8550/ayntec/odin2portal/adsp.mbn",
+ "qcom/sm8550/ayntec/odin2portal/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&spk_amp_l {
+ firmware-name = "qcom/sm8550/ayntec/odin2portal/aw883xx_acf.bin";
+};
+
+&spk_amp_r {
+ firmware-name = "qcom/sm8550/ayntec/odin2portal/aw883xx_acf.bin";
+};
+
--
2.53.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v4 5/6] arm64: dts: qcom: Add AYN Odin 2 Portal
2026-03-23 16:27 ` [PATCH v4 5/6] arm64: dts: qcom: Add AYN Odin 2 Portal Aaron Kling via B4 Relay
@ 2026-03-24 12:36 ` Konrad Dybcio
0 siblings, 0 replies; 20+ messages in thread
From: Konrad Dybcio @ 2026-03-24 12:36 UTC (permalink / raw)
To: webgeek1234, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Teguh Sobirin
On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
> From: Teguh Sobirin <teguh@sobir.in>
>
> The AYN Odin 2 Portal is a high-performance Android-based handheld gaming
> console powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring a
> 7-inch OLED touchscreen.
>
> Signed-off-by: Teguh Sobirin <teguh@sobir.in>
> Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 6/6] arm64: dts: qcom: Add AYN Thor
2026-03-23 16:27 [PATCH v4 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices Aaron Kling via B4 Relay
` (4 preceding siblings ...)
2026-03-23 16:27 ` [PATCH v4 5/6] arm64: dts: qcom: Add AYN Odin 2 Portal Aaron Kling via B4 Relay
@ 2026-03-23 16:27 ` Aaron Kling via B4 Relay
2026-03-25 11:09 ` Konrad Dybcio
5 siblings, 1 reply; 20+ messages in thread
From: Aaron Kling via B4 Relay @ 2026-03-23 16:27 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Aaron Kling,
Teguh Sobirin
From: Teguh Sobirin <teguh@sobir.in>
The AYN Thor is a high-performance Android-based handheld gaming console
powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring dual
AMOLED touchscreens.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts | 230 +++++++++++++++++++++++
2 files changed, 231 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5ed85a8843c5ac5cf943f9d0c40ad6da7cba219c..5a35c99ac44a69117cba45f06b85097d53e175b9 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride-el2.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2mini.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2portal.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-thor.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts
new file mode 100644
index 0000000000000000000000000000000000000000..00f4032628df2e8d8729a1e93f5cf6dda9420a6d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "qcs8550-ayntec-common.dtsi"
+
+&{/} {
+ model = "AYN Thor";
+ compatible = "ayntec,thor", "qcom,qcs8550", "qcom,sm8550";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&volume_up_n &key_ayn_n>;
+
+ key-ayn {
+ label = "AYN Key";
+ debounce-interval = <15>;
+ gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F24>;
+ linux,can-disable;
+ };
+
+ switch-lid {
+ label = "Hall Lid Sensor";
+ gpios = <&tlmm 17 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ vdd_bl_5v0: vdd-bl-5v0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_bl_5v0";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_disp_1v8: vdd-disp-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_disp_1v8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_disp1_2v8: vdd-disp1-2v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_disp1_2v8";
+
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_disp2_2v8: vdd-disp2-2v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_disp2_2v8";
+
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ gpio = <&tlmm 143 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_ts_3v0: vdd-ts-3v0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ts_3v0";
+
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ gpio = <&tlmm 144 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_ts_1v8: vdd-ts-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ts_1v8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@38 {
+ compatible = "focaltech,ft5426";
+ reg = <0x38>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l14b_3p2>;
+ iovcc-supply = <&vreg_l12b_1p8>;
+
+ pinctrl-0 = <&ts_p_rst_default &ts_p_int_default>;
+ pinctrl-1 = <&ts_p_rst_sleep &ts_p_int_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ touchscreen-swapped-x-y;
+ touchscreen-inverted-x;
+ };
+};
+
+&i2c_hub_3 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@38 {
+ compatible = "focaltech,ft5452";
+ reg = <0x38>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 14 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vdd_ts_3v0>;
+ iovcc-supply = <&vdd_ts_1v8>;
+
+ pinctrl-0 = <&ts_s_rst_default &ts_s_int_default>;
+ pinctrl-1 = <&ts_s_rst_sleep &ts_s_int_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1240>;
+ touchscreen-swapped-x-y;
+ touchscreen-inverted-x;
+ };
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ reg = <0>;
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l1e_0p88>;
+ status = "okay";
+};
+
+&mdss_dsi1_out {
+ qcom,te-source = "mdp_vsync_s";
+};
+
+&pm8550_pwm {
+ multi-led {
+ status = "disabled";
+ };
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8550/ayntec/thor/adsp.mbn",
+ "qcom/sm8550/ayntec/thor/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&spk_amp_l {
+ firmware-name = "qcom/sm8550/ayntec/thor/aw883xx_acf.bin";
+};
+
+&spk_amp_r {
+ firmware-name = "qcom/sm8550/ayntec/thor/aw883xx_acf.bin";
+};
+
+&tlmm {
+ key_ayn_n: key-ayn-n-state {
+ pins = "gpio41";
+ function = "gpio";
+ bias-pull-up;
+ output-disable;
+ };
+};
--
2.53.0
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH v4 6/6] arm64: dts: qcom: Add AYN Thor
2026-03-23 16:27 ` [PATCH v4 6/6] arm64: dts: qcom: Add AYN Thor Aaron Kling via B4 Relay
@ 2026-03-25 11:09 ` Konrad Dybcio
2026-03-25 16:45 ` Aaron Kling
0 siblings, 1 reply; 20+ messages in thread
From: Konrad Dybcio @ 2026-03-25 11:09 UTC (permalink / raw)
To: webgeek1234, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Teguh Sobirin
On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
> From: Teguh Sobirin <teguh@sobir.in>
>
> The AYN Thor is a high-performance Android-based handheld gaming console
> powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring dual
> AMOLED touchscreens.
>
> Signed-off-by: Teguh Sobirin <teguh@sobir.in>
> Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
[...]
> +&{/} {
> + model = "AYN Thor";
> + compatible = "ayntec,thor", "qcom,qcs8550", "qcom,sm8550";
> +
> + gpio-keys {
Please override gpio-keys from common by label reference
[...]
> +&mdss_dsi0_phy {
> + vdds-supply = <&vreg_l1e_0p88>;
> + status = "okay";
nit: Please uniformly keep a \n before status
> +};
> +
> +&mdss_dsi1_out {
> + qcom,te-source = "mdp_vsync_s";
> +};
> +
> +&pm8550_pwm {
> + multi-led {
> + status = "disabled";
> + };
Please override the multi-led node by label directly
Konrad
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH v4 6/6] arm64: dts: qcom: Add AYN Thor
2026-03-25 11:09 ` Konrad Dybcio
@ 2026-03-25 16:45 ` Aaron Kling
0 siblings, 0 replies; 20+ messages in thread
From: Aaron Kling @ 2026-03-25 16:45 UTC (permalink / raw)
To: Konrad Dybcio
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
Teguh Sobirin
On Wed, Mar 25, 2026 at 6:09 AM Konrad Dybcio
<konrad.dybcio@oss.qualcomm.com> wrote:
>
> On 3/23/26 5:27 PM, Aaron Kling via B4 Relay wrote:
> > From: Teguh Sobirin <teguh@sobir.in>
> >
> > The AYN Thor is a high-performance Android-based handheld gaming console
> > powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring dual
> > AMOLED touchscreens.
> >
> > Signed-off-by: Teguh Sobirin <teguh@sobir.in>
> > Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
> > Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> > ---
>
> [...]
>
> > +&{/} {
> > + model = "AYN Thor";
> > + compatible = "ayntec,thor", "qcom,qcs8550", "qcom,sm8550";
> > +
> > + gpio-keys {
>
> Please override gpio-keys from common by label reference
Ack
> [...]
>
> > +&mdss_dsi0_phy {
> > + vdds-supply = <&vreg_l1e_0p88>;
> > + status = "okay";
>
> nit: Please uniformly keep a \n before status
Ack. Tried to get all of these last revision, but looks like I missed one.
> > +};
> > +
> > +&mdss_dsi1_out {
> > + qcom,te-source = "mdp_vsync_s";
> > +};
> > +
> > +&pm8550_pwm {
> > + multi-led {
> > + status = "disabled";
> > + };
>
> Please override the multi-led node by label directly
Ack.
Aaron
^ permalink raw reply [flat|nested] 20+ messages in thread