[PATCH] spmi: pmic-arb: add missing newline in dev_err format strings

[PATCH] spmi: pmic-arb: add missing newline in dev_err format strings

[David Collins]

dev_err() format strings should end with '\n'.  Several such
format strings in the spmi-pmic-arb driver are missing it.
Add newlines where needed.

Fixes: 02922ccbb330 ("spmi: pmic-arb: Register controller for bus instead of arbiter")
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 791cdc160c51..c408ded0c00f 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -398,7 +398,7 @@ static int pmic_arb_fmt_read_cmd(struct spmi_pmic_arb_bus *bus, u8 opc, u8 sid,
 
 	*offset = rc;
 	if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
-		dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested",
+		dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested\n",
 			PMIC_ARB_MAX_TRANS_BYTES, len);
 		return  -EINVAL;
 	}
@@ -477,7 +477,7 @@ static int pmic_arb_fmt_write_cmd(struct spmi_pmic_arb_bus *bus, u8 opc,
 
 	*offset = rc;
 	if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
-		dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested",
+		dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested\n",
 			PMIC_ARB_MAX_TRANS_BYTES, len);
 		return  -EINVAL;
 	}
@@ -1702,7 +1702,7 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
 
 	index = of_property_match_string(node, "reg-names", "cnfg");
 	if (index < 0) {
-		dev_err(dev, "cnfg reg region missing");
+		dev_err(dev, "cnfg reg region missing\n");
 		return -EINVAL;
 	}
 
@@ -1712,7 +1712,7 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
 
 	index = of_property_match_string(node, "reg-names", "intr");
 	if (index < 0) {
-		dev_err(dev, "intr reg region missing");
+		dev_err(dev, "intr reg region missing\n");
 		return -EINVAL;
 	}
 
-- 
2.25.1

Re: [PATCH] spmi: pmic-arb: add missing newline in dev_err format strings

[Bjorn Andersson]

On Wed, Jul 03, 2024 at 03:12:48PM GMT, David Collins wrote:
> dev_err() format strings should end with '\n'.  Several such
> format strings in the spmi-pmic-arb driver are missing it.
> Add newlines where needed.
> 
> Fixes: 02922ccbb330 ("spmi: pmic-arb: Register controller for bus instead of arbiter")
> Signed-off-by: David Collins <quic_collinsd@quicinc.com>

Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Regards,
Bjorn

> ---
>  drivers/spmi/spmi-pmic-arb.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index 791cdc160c51..c408ded0c00f 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -398,7 +398,7 @@ static int pmic_arb_fmt_read_cmd(struct spmi_pmic_arb_bus *bus, u8 opc, u8 sid,
>  
>  	*offset = rc;
>  	if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
> -		dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested",
> +		dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested\n",
>  			PMIC_ARB_MAX_TRANS_BYTES, len);
>  		return  -EINVAL;
>  	}
> @@ -477,7 +477,7 @@ static int pmic_arb_fmt_write_cmd(struct spmi_pmic_arb_bus *bus, u8 opc,
>  
>  	*offset = rc;
>  	if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
> -		dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested",
> +		dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested\n",
>  			PMIC_ARB_MAX_TRANS_BYTES, len);
>  		return  -EINVAL;
>  	}
> @@ -1702,7 +1702,7 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
>  
>  	index = of_property_match_string(node, "reg-names", "cnfg");
>  	if (index < 0) {
> -		dev_err(dev, "cnfg reg region missing");
> +		dev_err(dev, "cnfg reg region missing\n");
>  		return -EINVAL;
>  	}
>  
> @@ -1712,7 +1712,7 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
>  
>  	index = of_property_match_string(node, "reg-names", "intr");
>  	if (index < 0) {
> -		dev_err(dev, "intr reg region missing");
> +		dev_err(dev, "intr reg region missing\n");
>  		return -EINVAL;
>  	}
>  
> -- 
> 2.25.1
> 
> 

Re: [PATCH] spmi: pmic-arb: add missing newline in dev_err format strings

[Stephen Boyd]

Quoting David Collins (2024-07-03 15:12:48)
> dev_err() format strings should end with '\n'.  Several such
> format strings in the spmi-pmic-arb driver are missing it.
> Add newlines where needed.
> 
> Fixes: 02922ccbb330 ("spmi: pmic-arb: Register controller for bus instead of arbiter")
> Signed-off-by: David Collins <quic_collinsd@quicinc.com>
> ---

Applied to spmi-next