[PATCH 0/2] clk: qcom: gcc-{sm8550/sm8650}: Fix UFS resume from suspend issue

[PATCH 0/2] clk: qcom: gcc-{sm8550/sm8650}: Fix UFS resume from suspend issue

[Manivannan Sadhasivam via B4 Relay]

Hi,

This series fixes the UFS resume from suspend issue by marking the UFS PHY GDSCs
as ALWAYS_ON. Starting from SM8550, UFS PHY GDSCs doesn't support retention
state. So we should keep them always on so that they don't loose the state
during suspend.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
Manivannan Sadhasivam (2):
      clk: qcom: gcc-sm8550: Keep UFS PHY GDSCs ALWAYS_ON
      clk: qcom: gcc-sm8650: Keep UFS PHY GDSCs ALWAYS_ON

 drivers/clk/qcom/gcc-sm8550.c | 4 ++--
 drivers/clk/qcom/gcc-sm8650.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20241107-ufs-clk-fix-e49ee2097594

Best regards,
-- 
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

[PATCH 1/2] clk: qcom: gcc-sm8550: Keep UFS PHY GDSCs ALWAYS_ON

[Manivannan Sadhasivam via B4 Relay]

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Starting from SM8550, UFS PHY GDSCs doesn't support hardware retention. So
using RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs
will get powered down during suspend, causing the UFS PHY to loose its
state. And this will lead to below UFS error during resume as observed on
SM8550-QRD:

ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5

Cc: stable@vger.kernel.org # 6.8
Fixes: 1fe8273c8d40 ("clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/clk/qcom/gcc-sm8550.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8550.c b/drivers/clk/qcom/gcc-sm8550.c
index 5abaeddd6afc..7dd08e175820 100644
--- a/drivers/clk/qcom/gcc-sm8550.c
+++ b/drivers/clk/qcom/gcc-sm8550.c
@@ -3046,7 +3046,7 @@ static struct gdsc ufs_phy_gdsc = {
 		.name = "ufs_phy_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
 };
 
 static struct gdsc ufs_mem_phy_gdsc = {
@@ -3055,7 +3055,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
 		.name = "ufs_mem_phy_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
 };
 
 static struct gdsc usb30_prim_gdsc = {

-- 
2.25.1

Re: [PATCH 1/2] clk: qcom: gcc-sm8550: Keep UFS PHY GDSCs ALWAYS_ON

[Neil Armstrong]

On 07/11/2024 12:58, Manivannan Sadhasivam via B4 Relay wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> 
> Starting from SM8550, UFS PHY GDSCs doesn't support hardware retention. So
> using RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs
> will get powered down during suspend, causing the UFS PHY to loose its
> state. And this will lead to below UFS error during resume as observed on
> SM8550-QRD:
> 
> ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
> ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
> ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
> ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
> ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5
> 
> Cc: stable@vger.kernel.org # 6.8
> Fixes: 1fe8273c8d40 ("clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag")
> Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
> Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>   drivers/clk/qcom/gcc-sm8550.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-sm8550.c b/drivers/clk/qcom/gcc-sm8550.c
> index 5abaeddd6afc..7dd08e175820 100644
> --- a/drivers/clk/qcom/gcc-sm8550.c
> +++ b/drivers/clk/qcom/gcc-sm8550.c
> @@ -3046,7 +3046,7 @@ static struct gdsc ufs_phy_gdsc = {
>   		.name = "ufs_phy_gdsc",
>   	},
>   	.pwrsts = PWRSTS_OFF_ON,
> -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
>   };
>   
>   static struct gdsc ufs_mem_phy_gdsc = {
> @@ -3055,7 +3055,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
>   		.name = "ufs_mem_phy_gdsc",
>   	},
>   	.pwrsts = PWRSTS_OFF_ON,
> -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
>   };
>   
>   static struct gdsc usb30_prim_gdsc = {
> 

Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK

Thanks,
Neil

Re: [PATCH 1/2] clk: qcom: gcc-sm8550: Keep UFS PHY GDSCs ALWAYS_ON

[Bjorn Andersson]

On Thu, Nov 07, 2024 at 11:58:09AM +0000, Manivannan Sadhasivam via B4 Relay wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> 
> Starting from SM8550, UFS PHY GDSCs doesn't support hardware retention. So
> using RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs
> will get powered down during suspend, causing the UFS PHY to loose its
> state. And this will lead to below UFS error during resume as observed on
> SM8550-QRD:
> 

Unless I'm mistaken, ALWAYS_ON makes GDSC keep the gendpd ALWAYS_ON as
well, which in turn would ensure that any parent power-domain is kept
active - which in the case of GCC would imply CX.

The way we've dealt with this elsewhere is to use the PWRSTS_RET_ON flag
in pwrsts; we then keep the GDSC active, but release any votes to the
parent and rely on hardware to kick in MX when we're shutting down CX.
Perhaps this can't be done for some reason?


PS. In contrast to other platforms where we've dealt with issues of
under voltage crashes, I see &gcc in sm8550.dtsi doesn't specify a
parent power-domain, which would mean that the required-opps = <&nom> of
&ufs_mem_hc is voting for nothing.

Regards,
Bjorn

> ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
> ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
> ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
> ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
> ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5
> 
> Cc: stable@vger.kernel.org # 6.8
> Fixes: 1fe8273c8d40 ("clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag")
> Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
> Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/clk/qcom/gcc-sm8550.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-sm8550.c b/drivers/clk/qcom/gcc-sm8550.c
> index 5abaeddd6afc..7dd08e175820 100644
> --- a/drivers/clk/qcom/gcc-sm8550.c
> +++ b/drivers/clk/qcom/gcc-sm8550.c
> @@ -3046,7 +3046,7 @@ static struct gdsc ufs_phy_gdsc = {
>  		.name = "ufs_phy_gdsc",
>  	},
>  	.pwrsts = PWRSTS_OFF_ON,
> -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
>  };
>  
>  static struct gdsc ufs_mem_phy_gdsc = {
> @@ -3055,7 +3055,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
>  		.name = "ufs_mem_phy_gdsc",
>  	},
>  	.pwrsts = PWRSTS_OFF_ON,
> -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
>  };
>  
>  static struct gdsc usb30_prim_gdsc = {
> 
> -- 
> 2.25.1
> 
> 

Re: [PATCH 1/2] clk: qcom: gcc-sm8550: Keep UFS PHY GDSCs ALWAYS_ON

[Manivannan Sadhasivam]

On Tue, Nov 26, 2024 at 10:21:10PM -0600, Bjorn Andersson wrote:
> On Thu, Nov 07, 2024 at 11:58:09AM +0000, Manivannan Sadhasivam via B4 Relay wrote:
> > From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > 
> > Starting from SM8550, UFS PHY GDSCs doesn't support hardware retention. So
> > using RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs
> > will get powered down during suspend, causing the UFS PHY to loose its
> > state. And this will lead to below UFS error during resume as observed on
> > SM8550-QRD:
> > 
> 
> Unless I'm mistaken, ALWAYS_ON makes GDSC keep the gendpd ALWAYS_ON as
> well, which in turn would ensure that any parent power-domain is kept
> active - which in the case of GCC would imply CX.
> 

That's correct. But there is one more way to fix this issue. We can powerdown
UFS (controller and device) during suspend and the ufs-qcom driver can specify
the default suspend level based on platform. I think that would be more
appropriate than forbidding CX power collapse for the whole SoC.

Let me cook up a patch.

> The way we've dealt with this elsewhere is to use the PWRSTS_RET_ON flag
> in pwrsts; we then keep the GDSC active, but release any votes to the
> parent and rely on hardware to kick in MX when we're shutting down CX.
> Perhaps this can't be done for some reason?
> 

UFS team told me that there is no 'hardware retention' for UFS PHYs starting
from SM8550 and asked to keep GDSCs ALWAYS_ON. So that would mean, there is no
MX backing also.

- Mani

> 
> PS. In contrast to other platforms where we've dealt with issues of
> under voltage crashes, I see &gcc in sm8550.dtsi doesn't specify a
> parent power-domain, which would mean that the required-opps = <&nom> of
> &ufs_mem_hc is voting for nothing.
> 
> Regards,
> Bjorn
> 
> > ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
> > ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
> > ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
> > ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
> > ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5
> > 
> > Cc: stable@vger.kernel.org # 6.8
> > Fixes: 1fe8273c8d40 ("clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag")
> > Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
> > Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  drivers/clk/qcom/gcc-sm8550.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/clk/qcom/gcc-sm8550.c b/drivers/clk/qcom/gcc-sm8550.c
> > index 5abaeddd6afc..7dd08e175820 100644
> > --- a/drivers/clk/qcom/gcc-sm8550.c
> > +++ b/drivers/clk/qcom/gcc-sm8550.c
> > @@ -3046,7 +3046,7 @@ static struct gdsc ufs_phy_gdsc = {
> >  		.name = "ufs_phy_gdsc",
> >  	},
> >  	.pwrsts = PWRSTS_OFF_ON,
> > -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> > +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
> >  };
> >  
> >  static struct gdsc ufs_mem_phy_gdsc = {
> > @@ -3055,7 +3055,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
> >  		.name = "ufs_mem_phy_gdsc",
> >  	},
> >  	.pwrsts = PWRSTS_OFF_ON,
> > -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> > +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
> >  };
> >  
> >  static struct gdsc usb30_prim_gdsc = {
> > 
> > -- 
> > 2.25.1
> > 
> > 

-- 
மணிவண்ணன் சதாசிவம்

[PATCH 2/2] clk: qcom: gcc-sm8650: Keep UFS PHY GDSCs ALWAYS_ON

[Manivannan Sadhasivam via B4 Relay]

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

In SM8650, UFS PHY GDSCs doesn't support hardware retention. So using
RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs will get
powered down during suspend, causing the UFS PHY to loose its state. And
this will lead to UFS error similar to below during resume:

ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5

Cc: stable@vger.kernel.org # 6.8
Fixes: c58225b7e3d7 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/clk/qcom/gcc-sm8650.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8650.c b/drivers/clk/qcom/gcc-sm8650.c
index fd9d6544bdd5..ddc38caf7160 100644
--- a/drivers/clk/qcom/gcc-sm8650.c
+++ b/drivers/clk/qcom/gcc-sm8650.c
@@ -3480,7 +3480,7 @@ static struct gdsc ufs_phy_gdsc = {
 		.name = "ufs_phy_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
 };
 
 static struct gdsc ufs_mem_phy_gdsc = {
@@ -3489,7 +3489,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
 		.name = "ufs_mem_phy_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
 };
 
 static struct gdsc usb30_prim_gdsc = {

-- 
2.25.1

Re: [PATCH 2/2] clk: qcom: gcc-sm8650: Keep UFS PHY GDSCs ALWAYS_ON

[Neil Armstrong]

On 07/11/2024 12:58, Manivannan Sadhasivam via B4 Relay wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> 
> In SM8650, UFS PHY GDSCs doesn't support hardware retention. So using
> RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs will get
> powered down during suspend, causing the UFS PHY to loose its state. And
> this will lead to UFS error similar to below during resume:
> 
> ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
> ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
> ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
> ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
> ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5
> 
> Cc: stable@vger.kernel.org # 6.8
> Fixes: c58225b7e3d7 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
> Suggested-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>   drivers/clk/qcom/gcc-sm8650.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-sm8650.c b/drivers/clk/qcom/gcc-sm8650.c
> index fd9d6544bdd5..ddc38caf7160 100644
> --- a/drivers/clk/qcom/gcc-sm8650.c
> +++ b/drivers/clk/qcom/gcc-sm8650.c
> @@ -3480,7 +3480,7 @@ static struct gdsc ufs_phy_gdsc = {
>   		.name = "ufs_phy_gdsc",
>   	},
>   	.pwrsts = PWRSTS_OFF_ON,
> -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
>   };
>   
>   static struct gdsc ufs_mem_phy_gdsc = {
> @@ -3489,7 +3489,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
>   		.name = "ufs_mem_phy_gdsc",
>   	},
>   	.pwrsts = PWRSTS_OFF_ON,
> -	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> +	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
>   };
>   
>   static struct gdsc usb30_prim_gdsc = {
> 

Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK

Thanks!
Neil