* [PATCH v3 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
2024-10-13 11:54 [PATCH v3 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023 Jens Glathe via B4 Relay
@ 2024-10-13 11:54 ` Jens Glathe via B4 Relay
2024-10-14 7:20 ` Krzysztof Kozlowski
2024-10-13 11:54 ` [PATCH v3 2/3] firmware: qcom: scm: Allow QSEECOM for " Jens Glathe via B4 Relay
` (2 subsequent siblings)
3 siblings, 1 reply; 11+ messages in thread
From: Jens Glathe via B4 Relay @ 2024-10-13 11:54 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Jens Glathe, Merck Hung
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Add compatible values for the Microsoft Windows Dev Kit (WDK2023)
with its codename "blackrock". The Dev kit is a small desktop box
based on the mainboard of the Surface pro 9 5G, intended for
developers to test/build arm64-based Windows software.
Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 5de6290cd063a..8790c6ef768c7 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -822,6 +822,7 @@ properties:
- enum:
- lenovo,thinkpad-x13s
- microsoft,arcata
+ - microsoft,blackrock
- qcom,sc8280xp-crd
- qcom,sc8280xp-qrd
- const: qcom,sc8280xp
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v3 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
2024-10-13 11:54 ` [PATCH v3 1/3] dt-bindings: arm: qcom: Add Microsoft " Jens Glathe via B4 Relay
@ 2024-10-14 7:20 ` Krzysztof Kozlowski
0 siblings, 0 replies; 11+ messages in thread
From: Krzysztof Kozlowski @ 2024-10-14 7:20 UTC (permalink / raw)
To: Jens Glathe
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel, Merck Hung
On Sun, Oct 13, 2024 at 01:54:03PM +0200, Jens Glathe wrote:
> Add compatible values for the Microsoft Windows Dev Kit (WDK2023)
> with its codename "blackrock". The Dev kit is a small desktop box
> based on the mainboard of the Surface pro 9 5G, intended for
> developers to test/build arm64-based Windows software.
> Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
>
> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 2/3] firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
2024-10-13 11:54 [PATCH v3 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023 Jens Glathe via B4 Relay
2024-10-13 11:54 ` [PATCH v3 1/3] dt-bindings: arm: qcom: Add Microsoft " Jens Glathe via B4 Relay
@ 2024-10-13 11:54 ` Jens Glathe via B4 Relay
2024-10-13 11:54 ` [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023 Jens Glathe via B4 Relay
2024-10-14 14:05 ` [PATCH v3 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023 Rob Herring (Arm)
3 siblings, 0 replies; 11+ messages in thread
From: Jens Glathe via B4 Relay @ 2024-10-13 11:54 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Jens Glathe, Merck Hung
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
add "microsoft,blackrock" as compatible device for QSEECOM
This is required to get access to efivars and uefi boot loader support.
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
drivers/firmware/qcom/qcom_scm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index ebb58bd63edad..e98390e17b217 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -1736,6 +1736,7 @@ static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = {
{ .compatible = "lenovo,thinkpad-x13s", },
{ .compatible = "lenovo,yoga-slim7x" },
{ .compatible = "microsoft,arcata", },
+ { .compatible = "microsoft,blackrock" },
{ .compatible = "microsoft,romulus13", },
{ .compatible = "microsoft,romulus15", },
{ .compatible = "qcom,sc8180x-primus" },
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
2024-10-13 11:54 [PATCH v3 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023 Jens Glathe via B4 Relay
2024-10-13 11:54 ` [PATCH v3 1/3] dt-bindings: arm: qcom: Add Microsoft " Jens Glathe via B4 Relay
2024-10-13 11:54 ` [PATCH v3 2/3] firmware: qcom: scm: Allow QSEECOM for " Jens Glathe via B4 Relay
@ 2024-10-13 11:54 ` Jens Glathe via B4 Relay
2024-10-14 3:37 ` Krishna Kurapati
2024-10-18 14:38 ` Konrad Dybcio
2024-10-14 14:05 ` [PATCH v3 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023 Rob Herring (Arm)
3 siblings, 2 replies; 11+ messages in thread
From: Jens Glathe via B4 Relay @ 2024-10-13 11:54 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Jens Glathe, Merck Hung
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Device tree for the Microsoft Windows Dev Kit 2023. This work
is based on the initial work of Merck Hung <merckhung@gmail.com>.
The Windows Dev Kit 2023 is a nice little desktop based on sc8280xp.
Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
Supported features:
- USB type-c and type-a ports
- minidp connector
- built-in r8152 Ethernet adapter
- PCIe devices
- nvme
- ath11k WiFi (WCN6855)
- WCN6855 Bluetooth
- A690 GPU
- ADSP and CDSP
- GPIO keys
- Audio definition (works via USB)
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Merck Hung <merckhung@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sc8280xp-microsoft-blackrock.dts | 1397 ++++++++++++++++++++
2 files changed, 1398 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index aea1d69db541e..5cca5f08c8a6d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-microsoft-arcata.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-microsoft-blackrock.dtb
dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm450-lenovo-tbx605f.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
new file mode 100644
index 0000000000000..5907e9c965964
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
@@ -0,0 +1,1397 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ * Copyright (c) 2023, Merck Hung <merckhung@gmail.com>
+ * Copyright (c) 2023, 2024 Jens Glathe <jens.glathe@oldschoolsolutions.biz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+ model = "Windows Dev Kit 2023";
+ compatible = "microsoft,blackrock", "qcom,sc8280xp";
+ chassis-type = "desktop";
+
+ aliases {
+ i2c4 = &i2c4;
+ i2c21 = &i2c21;
+ serial1 = &uart2;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9380-codec";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcd_default>;
+
+ reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_s10b>;
+ vdd-rxtx-supply = <&vreg_s10b>;
+ vdd-io-supply = <&vreg_s10b>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ dp1_connector: connector {
+ compatible = "dp-connector";
+ label = "DP1";
+ type = "mini";
+
+ dp-pwr-supply = <&vreg_misc_3p3>;
+
+ port {
+ dp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp2_phy_out>;
+ };
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
+ <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "source";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_con0_hs: endpoint {
+ remote-endpoint = <&usb_0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_con0_ss: endpoint {
+ remote-endpoint = <&usb_0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_con0_sbu: endpoint {
+ remote-endpoint = <&usb0_sbu_mux>;
+ };
+ };
+ };
+ };
+
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "source";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_con1_hs: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_con1_ss: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_con1_sbu: endpoint {
+ remote-endpoint = <&usb1_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3B";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&misc_3p3_reg_en>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3_SSD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nvme_reg_en>;
+
+ regulator-boot-on;
+ };
+
+ vreg_vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VPH_VCC3R9";
+ regulator-min-microvolt = <3900000>;
+ regulator-max-microvolt = <3900000>;
+
+ regulator-always-on;
+ };
+
+ vreg_wlan: regulator-wlan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC_WLAN_3R9";
+ regulator-min-microvolt = <3900000>;
+ regulator-max-microvolt = <3900000>;
+
+ gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hastings_reg_en>;
+
+ regulator-boot-on;
+ };
+
+ vreg_wwan: regulator-wwan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3B_WAN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wwan_sw_en>;
+
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ gpu_mem: gpu-mem@8bf00000 {
+ reg = <0 0x8bf00000 0 0x2000>;
+ no-map;
+ };
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
+ usb0-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_sbu_default>;
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb0_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_con0_sbu>;
+ };
+ };
+ };
+
+ usb1-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_sbu_default>;
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb1_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_con1_sbu>;
+ };
+ };
+ };
+
+ wcn6855-pmu {
+ compatible = "qcom,wcn6855-pmu";
+
+ pinctrl-0 = <&bt_default>, <&wlan_en>;
+ pinctrl-names = "default";
+
+ wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+ vddio-supply = <&vreg_s10b>;
+ vddaon-supply = <&vreg_s12b>;
+ vddpmu-supply = <&vreg_s12b>;
+ vddrfa0p95-supply = <&vreg_s12b>;
+ vddrfa1p3-supply = <&vreg_s11b>;
+ vddrfa1p9-supply = <&vreg_s1c>;
+ vddpcie1p3-supply = <&vreg_s11b>;
+ vddpcie1p9-supply = <&vreg_s1c>;
+
+ regulators {
+ vreg_pmu_rfa_cmn_0p8: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn_0p8";
+ };
+
+ vreg_pmu_aon_0p8: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p8";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p8: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p8";
+ };
+
+ vreg_pmu_btcmx_0p8: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p8";
+ };
+
+ vreg_pmu_pcie_1p8: ldo5 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo6 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_rfa_0p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo8 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo9 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s10-supply = <&vreg_vph_pwr>;
+ vdd-s11-supply = <&vreg_vph_pwr>;
+ vdd-s12-supply = <&vreg_vph_pwr>;
+ vdd-l1-l4-supply = <&vreg_s12b>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_s11b>;
+ vdd-l6-l9-l10-supply = <&vreg_s12b>;
+ vdd-l8-supply = <&vreg_s12b>;
+
+ vreg_s10b: smps10 {
+ regulator-name = "vreg_s10b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_s11b: smps11 {
+ regulator-name = "vreg_s11b";
+ regulator-min-microvolt = <1272000>;
+ regulator-max-microvolt = <1272000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s12b: smps12 {
+ regulator-name = "vreg_s12b";
+ regulator-min-microvolt = <984000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b: ldo1 {
+ regulator-name = "vreg_l1b";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b: ldo3 {
+ regulator-name = "vreg_l3b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-boot-on;
+ };
+
+ vreg_l4b: ldo4 {
+ regulator-name = "vreg_l4b";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b: ldo6 {
+ regulator-name = "vreg_l6b";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-boot-on;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-bob-supply = <&vreg_vph_pwr>;
+ vdd-l1-l12-supply = <&vreg_s1c>;
+ vdd-l2-l8-supply = <&vreg_s1c>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&vreg_s11b>;
+
+ vreg_s1c: smps1 {
+ regulator-name = "vreg_s1c";
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c: ldo6 {
+ regulator-name = "vreg_l6c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c: ldo12 {
+ regulator-name = "vreg_l12c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c: ldo13 {
+ regulator-name = "vreg_l13c";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-always-on;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-l4-supply = <&vreg_s11b>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_s11b>;
+ vdd-l6-l9-l10-supply = <&vreg_s12b>;
+ vdd-l8-supply = <&vreg_s12b>;
+
+ vreg_l2d: ldo2 {
+ regulator-name = "vreg_l2d";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d: ldo3 {
+ regulator-name = "vreg_l3d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4d: ldo4 {
+ regulator-name = "vreg_l4d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6d: ldo6 {
+ regulator-name = "vreg_l6d";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7d: ldo7 {
+ regulator-name = "vreg_l7d";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8d: ldo8 {
+ regulator-name = "vreg_l8d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9d: ldo9 {
+ regulator-name = "vreg_l9d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10d: ldo10 {
+ regulator-name = "vreg_l10d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&dispcc0 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sc8280xp/MICROSOFT/blackrock/qcdxkmsuc8280.mbn";
+ };
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp0 {
+ status = "okay";
+};
+
+&mdss0_dp0_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+ status = "okay";
+};
+
+&mdss0_dp1_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss0_dp2 {
+ compatible = "qcom,sc8280xp-dp";
+
+ data-lanes = <0 1 2 3>;
+
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp2_phy_out: endpoint {
+ remote-endpoint = <&dp1_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp2_phy {
+ compatible = "qcom,sc8280xp-dp-phy";
+
+ vdda-phy-supply = <&vreg_l3b>;
+ phy-supply = <&vreg_l3b>;
+ vdda-pll-supply = <&vreg_l6b>;
+ pll-supply = <&vreg_l6b>;
+
+ status = "okay";
+};
+
+&pcie2a {
+ aspm-no-l0s;
+ max-link-speed = <16>;
+
+ perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+ pcie-vdda-supply = <&vreg_l7d>;
+ vdda-supply = <&vreg_l7d>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2a_default>;
+
+ status = "okay";
+};
+
+&pcie2a_phy {
+ vdda-phy-supply = <&vreg_l4d>;
+ phy-supply = <&vreg_l4d>;
+ vdda-pll-supply = <&vreg_l6d>;
+ pll-supply = <&vreg_l6d>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ aspm-no-l0s;
+ max-link-speed = <2>;
+
+ perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_wlan>;
+ pcie-vdda-supply = <&vreg_l7d>;
+ vdda-supply = <&vreg_l7d>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie4_default>;
+
+ status = "okay";
+};
+
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+ qcom,ath11k-calibration-variant = "volterra";
+ };
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l4d>;
+ phy-supply = <&vreg_l4d>;
+ vdda-pll-supply = <&vreg_l6d>;
+ pll-supply = <&vreg_l6d>;
+
+ status = "okay";
+};
+
+&pmc8280c_lpg {
+ status = "okay";
+};
+
+&pmk8280_adc_tm {
+ status = "okay";
+
+ sys-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@1 {
+ reg = <1>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@2 {
+ reg = <2>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@3 {
+ reg = <3>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@4 {
+ reg = <4>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@5 {
+ reg = <5>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@6 {
+ reg = <6>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@7 {
+ reg = <7>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+};
+
+&pmk8280_pon_pwrkey {
+ status = "okay";
+};
+
+&pmk8280_pon_resin {
+ status = "okay";
+};
+
+&pmk8280_rtc {
+ nvmem-cells = <&rtc_offset>;
+ nvmem-cell-names = "offset";
+
+ status = "okay";
+};
+
+&pmk8280_sdam_6 {
+ status = "okay";
+
+ rtc_offset: rtc-offset@bc {
+ reg = <0xbc 0x4>;
+ };
+};
+
+&pmk8280_vadc {
+ channel@144 {
+ reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm1";
+ };
+
+ channel@145 {
+ reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm2";
+ };
+
+ channel@146 {
+ reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm3";
+ };
+
+ channel@147 {
+ reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm4";
+ };
+
+ channel@344 {
+ reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm5";
+ };
+
+ channel@345 {
+ reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm6";
+ };
+
+ channel@346 {
+ reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm7";
+ };
+
+ channel@347 {
+ reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm8";
+ };
+};
+
+&qup0 {
+ status = "okay";
+};
+
+&qup1 {
+ status = "okay";
+};
+
+&qup2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sc8280xp/MICROSOFT/blackrock/qcadsp8280.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_nsp0 {
+ firmware-name = "qcom/sc8280xp/MICROSOFT/blackrock/qccdsp8280.mbn";
+
+ status = "okay";
+};
+
+&rxmacro {
+ status = "okay";
+};
+
+&sound {
+ compatible = "qcom,sc8280xp-sndcard";
+ model = "MICROSOFT/blackrock";
+ audio-routing =
+ "SpkrLeft IN", "WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC0", "VA MIC BIAS1",
+ "VA DMIC1", "VA MIC BIAS1",
+ "VA DMIC2", "VA MIC BIAS3",
+ "TX SWR_ADC1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ codec {
+ sound-dai = <&swr0 0>, <&wsamacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+
+ codec {
+ sound-dai = <&vamacro 0>;
+ };
+ };
+};
+
+&swr0 {
+ status = "okay";
+};
+
+&swr1 {
+ status = "okay";
+
+ wcd_rx: wcd9380-rx@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ wcd_tx: wcd9380-tx@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <1 1 2 3>;
+ };
+};
+
+&txmacro {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn6855-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+ max-speed = <3200000>;
+ };
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_0_hsphy {
+ vdda-pll-supply = <&vreg_l9d>;
+ vdda-phy-supply = <&vreg_l4d>;
+ phy-supply = <&vreg_l4d>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l4d>;
+ phy-supply = <&vreg_l4d>;
+ vdda-pll-supply = <&vreg_l9d>;
+ pll-supply = <&vreg_l9d>;
+
+ orientation-switch;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+ remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l4b>;
+ vdda-phy-supply = <&vreg_l3b>;
+ phy-supply = <&vreg_l3b>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l13c>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l3b>;
+ phy-supply = <&vreg_l3b>;
+ vdda-pll-supply = <&vreg_l4b>;
+ pll-supply = <&vreg_l4b>;
+
+ orientation-switch;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+ remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_en_state>;
+
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+ phy-names = "usb2-port0", "usb3-port0";
+ phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy0 {
+ vdda-pll-supply = <&vreg_l1b>;
+ vdda-phy-supply = <&vreg_l3d>;
+ phy-supply = <&vreg_l3d>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy1 {
+ vdda-pll-supply = <&vreg_l8d>;
+ vdda-phy-supply = <&vreg_l3d>;
+ phy-supply = <&vreg_l3d>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy2 {
+ vdda-pll-supply = <&vreg_l10d>;
+ vdda-phy-supply = <&vreg_l3d>;
+ phy-supply = <&vreg_l3d>;
+ vdda18-supply = <&vreg_l8c>;
+ vdda33-supply = <&vreg_l2d>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy3 {
+ vdda-pll-supply = <&vreg_l10d>;
+ vdda-phy-supply = <&vreg_l3d>;
+ phy-supply = <&vreg_l3d>;
+ vdda18-supply = <&vreg_l8c>;
+ vdda33-supply = <&vreg_l2d>;
+
+ status = "okay";
+};
+
+&usb_2_qmpphy0 {
+ vdda-phy-supply = <&vreg_l1b>;
+ phy-supply = <&vreg_l1b>;
+ vdda-pll-supply = <&vreg_l4d>;
+ pll-supply = <&vreg_l4d>;
+ status = "okay";
+};
+
+&usb_2_qmpphy1 {
+ vdda-phy-supply = <&vreg_l8d>;
+ phy-supply = <&vreg_l8d>;
+ vdda-pll-supply = <&vreg_l4d>;
+ pll-supply = <&vreg_l4d>;
+ status = "okay";
+};
+
+&vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_s10b>;
+
+ qcom,dmic-sample-rate = <4800000>;
+
+ status = "okay";
+};
+
+&wsamacro {
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+ status = "okay";
+};
+
+&pmc8280_1_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio8";
+ function = "normal";
+ };
+
+ edp_bl_reg_en: edp-bl-reg-en-state {
+ pins = "gpio9";
+ function = "normal";
+ };
+
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+};
+
+&pmc8280_2_gpios {
+ wwan_sw_en: wwan-sw-en-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+};
+
+&pmc8280c_gpios {
+ edp_bl_pwm: edp-bl-pwm-state {
+ pins = "gpio8";
+ function = "func1";
+ };
+};
+
+&pmr735a_gpios {
+ hastings_reg_en: hastings-reg-en-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>;
+
+ bt_default: bt-default-state {
+ hstp-bt-en-pins {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ hstp-sw-ctrl-pins {
+ pins = "gpio132";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio135";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie2a_default: pcie2a-default-state {
+ clkreq-n-pins {
+ pins = "gpio142";
+ function = "pcie2a_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio143";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio145";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie3a_default: pcie3a-default-state {
+ clkreq-n-pins {
+ pins = "gpio150";
+ function = "pcie3a_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio151";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio140";
+ function = "pcie4_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio141";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio139";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ uart2_default: uart2-default-state {
+ cts-pins {
+ pins = "gpio121";
+ function = "qup2";
+ bias-bus-hold;
+ };
+
+ rts-pins {
+ pins = "gpio122";
+ function = "qup2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-pins {
+ pins = "gpio124";
+ function = "qup2";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio123";
+ function = "qup2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ usb0_sbu_default: usb0-sbu-state {
+ oe-n-pins {
+ pins = "gpio101";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ output-high;
+ };
+
+ sel-pins {
+ pins = "gpio164";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ usb1_sbu_default: usb1-sbu-state {
+ oe-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ output-high;
+ };
+
+ sel-pins {
+ pins = "gpio47";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ usb2_en_state: usb2-en-state {
+ /* TS3USB221A USB2.0 mux select */
+ pins = "gpio24";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ wcd_default: wcd-default-state {
+ reset-pins {
+ pins = "gpio106";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ wlan_en: wlan-en-state {
+ pins = "gpio134";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
2024-10-13 11:54 ` [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023 Jens Glathe via B4 Relay
@ 2024-10-14 3:37 ` Krishna Kurapati
2024-10-18 14:34 ` Konrad Dybcio
2024-10-18 14:38 ` Konrad Dybcio
1 sibling, 1 reply; 11+ messages in thread
From: Krishna Kurapati @ 2024-10-14 3:37 UTC (permalink / raw)
To: jens.glathe
Cc: linux-arm-msm, devicetree, Conor Dooley, Krzysztof Kozlowski,
Rob Herring, Konrad Dybcio, Bjorn Andersson, linux-kernel,
Merck Hung
On 10/13/2024 5:24 PM, Jens Glathe via B4 Relay wrote:
> From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
>
> Device tree for the Microsoft Windows Dev Kit 2023. This work
> is based on the initial work of Merck Hung <merckhung@gmail.com>.
>
> The Windows Dev Kit 2023 is a nice little desktop based on sc8280xp.
> Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
>
> Supported features:
> - USB type-c and type-a ports
> - minidp connector
> - built-in r8152 Ethernet adapter
> - PCIe devices
> - nvme
> - ath11k WiFi (WCN6855)
> - WCN6855 Bluetooth
> - A690 GPU
> - ADSP and CDSP
> - GPIO keys
> - Audio definition (works via USB)
>
> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> Signed-off-by: Merck Hung <merckhung@gmail.com>
[...]
> +
> +&usb_0 {
> + status = "okay";
> +};
> +
> +&usb_0_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&usb_0_dwc3_hs {
> + remote-endpoint = <&pmic_glink_con0_hs>;
> +};
> +
> +&usb_0_hsphy {
> + vdda-pll-supply = <&vreg_l9d>;
> + vdda-phy-supply = <&vreg_l4d>;
> + phy-supply = <&vreg_l4d>;
> + vdda18-supply = <&vreg_l1c>;
> + vdda33-supply = <&vreg_l7d>;
> +
> + status = "okay";
> +};
> +
> +&usb_0_qmpphy {
> + vdda-phy-supply = <&vreg_l4d>;
> + phy-supply = <&vreg_l4d>;
> + vdda-pll-supply = <&vreg_l9d>;
> + pll-supply = <&vreg_l9d>;
> +
> + orientation-switch;
> +
> + status = "okay";
> +};
> +
I may be wrong but aren't only 3 supplies for femto and 2 supplies for
qmp sufficient ? I see two extra supplies in each node.
Same for all the other usb phys as well.
Regards,
Krishna,
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
2024-10-14 3:37 ` Krishna Kurapati
@ 2024-10-18 14:34 ` Konrad Dybcio
0 siblings, 0 replies; 11+ messages in thread
From: Konrad Dybcio @ 2024-10-18 14:34 UTC (permalink / raw)
To: Krishna Kurapati, jens.glathe
Cc: linux-arm-msm, devicetree, Conor Dooley, Krzysztof Kozlowski,
Rob Herring, Konrad Dybcio, Bjorn Andersson, linux-kernel,
Merck Hung
On 14.10.2024 5:37 AM, Krishna Kurapati wrote:
>
>
> On 10/13/2024 5:24 PM, Jens Glathe via B4 Relay wrote:
>> From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
>>
>> Device tree for the Microsoft Windows Dev Kit 2023. This work
>> is based on the initial work of Merck Hung <merckhung@gmail.com>.
>>
>> The Windows Dev Kit 2023 is a nice little desktop based on sc8280xp.
>> Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
[...]
>> +
>> +&usb_0_qmpphy {
>> + vdda-phy-supply = <&vreg_l4d>;
>> + phy-supply = <&vreg_l4d>;
>> + vdda-pll-supply = <&vreg_l9d>;
>> + pll-supply = <&vreg_l9d>;
>> +
>> + orientation-switch;
>> +
>> + status = "okay";
>> +};
>> +
>
> I may be wrong but aren't only 3 supplies for femto and 2 supplies for qmp sufficient ? I see two extra supplies in each node.
>
> Same for all the other usb phys as well.
Correct, drop the ones without "vdda-", Jens
Konrad
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
2024-10-13 11:54 ` [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023 Jens Glathe via B4 Relay
2024-10-14 3:37 ` Krishna Kurapati
@ 2024-10-18 14:38 ` Konrad Dybcio
2024-10-25 5:35 ` Jens Glathe
1 sibling, 1 reply; 11+ messages in thread
From: Konrad Dybcio @ 2024-10-18 14:38 UTC (permalink / raw)
To: jens.glathe, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Merck Hung
On 13.10.2024 1:54 PM, Jens Glathe via B4 Relay wrote:
> From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
>
> Device tree for the Microsoft Windows Dev Kit 2023. This work
> is based on the initial work of Merck Hung <merckhung@gmail.com>.
>
> The Windows Dev Kit 2023 is a nice little desktop based on sc8280xp.
> Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
[...]
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&wcd_default>;
property-n
property-names
(all throughout the file)
[...]
> + pmic-glink {
> + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
> + <&tlmm 49 GPIO_ACTIVE_HIGH>;
> +
> + connector@0 {
Could you add a comment describing which connector is which (see e.g.
x1e80100-microsoft-romulus.dtsi)
[...]
> +&gpu {
> + status = "okay";
> +
> + zap-shader {
> + memory-region = <&gpu_mem>;
> + firmware-name = "qcom/sc8280xp/MICROSOFT/blackrock/qcdxkmsuc8280.mbn";
"microsoft" lowercase would be consistent with other DTs in arm64/qcom
[...]
> +&sound {
> + compatible = "qcom,sc8280xp-sndcard";
> + model = "MICROSOFT/blackrock";
> + audio-routing =
> + "SpkrLeft IN", "WSA_SPK1 OUT",
> + "SpkrRight IN", "WSA_SPK2 OUT",
> + "IN1_HPHL", "HPHL_OUT",
> + "IN2_HPHR", "HPHR_OUT",
> + "AMIC2", "MIC BIAS2",
> + "VA DMIC0", "MIC BIAS1",
> + "VA DMIC1", "MIC BIAS1",
> + "VA DMIC2", "MIC BIAS3",
> + "VA DMIC0", "VA MIC BIAS1",
> + "VA DMIC1", "VA MIC BIAS1",
> + "VA DMIC2", "VA MIC BIAS3",
> + "TX SWR_ADC1", "ADC2_OUTPUT";
> +
> + wcd-playback-dai-link {
> + link-name = "WCD Playback";
> + cpu {
Please add a newline between the property and the subnodes
Konrad
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
2024-10-18 14:38 ` Konrad Dybcio
@ 2024-10-25 5:35 ` Jens Glathe
2024-10-25 8:55 ` Konrad Dybcio
0 siblings, 1 reply; 11+ messages in thread
From: Jens Glathe @ 2024-10-25 5:35 UTC (permalink / raw)
To: Konrad Dybcio, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Merck Hung
On 18.10.24 16:38, Konrad Dybcio wrote:
> On 13.10.2024 1:54 PM, Jens Glathe via B4 Relay wrote:
>> From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
>>
>> Device tree for the Microsoft Windows Dev Kit 2023. This work
>> is based on the initial work of Merck Hung <merckhung@gmail.com>.
>>
>> The Windows Dev Kit 2023 is a nice little desktop based on sc8280xp.
>> Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
> [...]
>
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&wcd_default>;
> property-n
> property-names
>
> (all throughout the file)
>
> [...]
>
>> + pmic-glink {
>> + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
>> + <&tlmm 49 GPIO_ACTIVE_HIGH>;
>> +
>> + connector@0 {
> Could you add a comment describing which connector is which (see e.g.
> x1e80100-microsoft-romulus.dtsi)
>
> [...]
>
>> +&gpu {
>> + status = "okay";
>> +
>> + zap-shader {
>> + memory-region = <&gpu_mem>;
>> + firmware-name = "qcom/sc8280xp/MICROSOFT/blackrock/qcdxkmsuc8280.mbn";
> "microsoft" lowercase would be consistent with other DTs in arm64/qcom
Hmm what about Lenovo X13s. I'll change it to lower case.
>
> [...]
>
>> +&sound {
>> + compatible = "qcom,sc8280xp-sndcard";
>> + model = "MICROSOFT/blackrock";
>> + audio-routing =
>> + "SpkrLeft IN", "WSA_SPK1 OUT",
>> + "SpkrRight IN", "WSA_SPK2 OUT",
>> + "IN1_HPHL", "HPHL_OUT",
>> + "IN2_HPHR", "HPHR_OUT",
>> + "AMIC2", "MIC BIAS2",
>> + "VA DMIC0", "MIC BIAS1",
>> + "VA DMIC1", "MIC BIAS1",
>> + "VA DMIC2", "MIC BIAS3",
>> + "VA DMIC0", "VA MIC BIAS1",
>> + "VA DMIC1", "VA MIC BIAS1",
>> + "VA DMIC2", "VA MIC BIAS3",
>> + "TX SWR_ADC1", "ADC2_OUTPUT";
>> +
>> + wcd-playback-dai-link {
>> + link-name = "WCD Playback";
>> + cpu {
> Please add a newline between the property and the subnodes
>
> Konrad
>
Will do a v4 now with all the new input.
- Jens
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
2024-10-25 5:35 ` Jens Glathe
@ 2024-10-25 8:55 ` Konrad Dybcio
0 siblings, 0 replies; 11+ messages in thread
From: Konrad Dybcio @ 2024-10-25 8:55 UTC (permalink / raw)
To: Jens Glathe, Konrad Dybcio, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Merck Hung
On 25.10.2024 7:35 AM, Jens Glathe wrote:
>
> On 18.10.24 16:38, Konrad Dybcio wrote:
>> On 13.10.2024 1:54 PM, Jens Glathe via B4 Relay wrote:
>>> From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
>>>
>>> Device tree for the Microsoft Windows Dev Kit 2023. This work
>>> is based on the initial work of Merck Hung <merckhung@gmail.com>.
>>>
>>> The Windows Dev Kit 2023 is a nice little desktop based on sc8280xp.
>>> Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
>> [...]
>>
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&wcd_default>;
>> property-n
>> property-names
>>
>> (all throughout the file)
>>
>> [...]
>>
>>> + pmic-glink {
>>> + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
>>> + <&tlmm 49 GPIO_ACTIVE_HIGH>;
>>> +
>>> + connector@0 {
>> Could you add a comment describing which connector is which (see e.g.
>> x1e80100-microsoft-romulus.dtsi)
>>
>> [...]
>>
>>> +&gpu {
>>> + status = "okay";
>>> +
>>> + zap-shader {
>>> + memory-region = <&gpu_mem>;
>>> + firmware-name = "qcom/sc8280xp/MICROSOFT/blackrock/qcdxkmsuc8280.mbn";
>> "microsoft" lowercase would be consistent with other DTs in arm64/qcom
> Hmm what about Lenovo X13s. I'll change it to lower case.
rg microsoft/ -i arch/arm64/boot/dts/qcom
yields lowercase, so let's not step out of the line
Konrad
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v3 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
2024-10-13 11:54 [PATCH v3 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023 Jens Glathe via B4 Relay
` (2 preceding siblings ...)
2024-10-13 11:54 ` [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023 Jens Glathe via B4 Relay
@ 2024-10-14 14:05 ` Rob Herring (Arm)
3 siblings, 0 replies; 11+ messages in thread
From: Rob Herring (Arm) @ 2024-10-14 14:05 UTC (permalink / raw)
To: Jens Glathe
Cc: linux-kernel, Merck Hung, linux-arm-msm, Konrad Dybcio,
Conor Dooley, devicetree, Bjorn Andersson, Krzysztof Kozlowski
On Sun, 13 Oct 2024 13:54:02 +0200, Jens Glathe wrote:
> "Microsoft Windows Dev Kit 2023" aka "Blackrock" aka "Project Volterra"
>
> Device tree for the Microsoft Windows Dev Kit 2023. This work
> is based on the initial work of Merck Hung <merckhung@gmail.com>.
>
> The Windows Dev Kit 2023 is a nice little desktop based on sc8280xp.
> Link: https://learn.microsoft.com/en-us/windows/arm/dev-kit/
>
> Supported features:
> - USB type-c and type-a ports
> - minidp connector
> - built-in r8152 Ethernet adapter
> - PCIe devices
> - nvme
> - ath11k WiFi (WCN6855)
> - WCN6855 Bluetooth
> - A690 GPU
> - Venus codec
> - ADSP and CDSP
> - GPIO keys
> - Audio definition (works via USB)
>
> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> Signed-off-by: Merck Hung <merckhung@gmail.com>
>
> Original work: https://github.com/merckhung/linux_ms_dev_kit/blob/ms-dev-kit-2023-v6.3.0/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-dev-kit-2023.dts
>
> This dt is more or less deducted from the Thinkpad X13s.
> It contains a lot of guesswork, and also a lot of research on
> what works with the Windows Dev Kit.
>
> The WiFi definition references qcom,ath11k-calibration-variant = "volterra"
> which is unfortunately not yet in the linux-firmware. You can leave it out,
> and the ath11k driver finds the default one for
> "bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2|18,qmi-board-id=255"
> which is quite sub-optimal. I have placed a pr on github/qca-swiss-army-knife:
> https://github.com/qca/qca-swiss-army-knife/pull/9 that provides an amended
> board-2.bin and a board-2.json to generate it.
>
> pcie2 (nvme) is intentionally specified as max-link-speed = <16>. The
> interface is capable of it, most current nvme ssds are capable of it,
> but the physical slot isn't. This leads to a silent downgrade to <8> instead
> of the "device is limited by bus, capable of..." message.
>
> It is in use and under development since May 2023, pretty stable now.
>
> ---
> Changes in v3:
> - tried to heed all advice and comments given - thank you
> - re-ordered patches to definition before use
> - added "microsoft,blackrock" as compatible in QSEECOM driver
> - removed the qseecom node
> - ordered nodes alphabetically {address, node name, label}
> - amended indentation
> - consistently used blackrock as identifier / directory name
> - sorted identifiers by the same order for multiple instances
> - added some explanation re WiFi
> - added definition for PMU on the WCN6855
> - added some explanation for pcie2 max-link-speed
> - Link to v2: https://lore.kernel.org/r/20240920-jg-blackrock-for-upstream-v2-0-9bf2f1b2191c@oldschoolsolutions.biz
>
> Changes in v2:
> - removed whitespaces and breaks
> - added compatibility binding
> - added feature list
> - reformatted Signed-off list
> - Link to v1: https://lore.kernel.org/r/5f5487e1-e458-4a3a-af02-c52e50ca1964@oldschoolsolutions.biz
>
> ---
> Jens Glathe (3):
> dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
> firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
> arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
>
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/sc8280xp-microsoft-blackrock.dts | 1397 ++++++++++++++++++++
> drivers/firmware/qcom/qcom_scm.c | 1 +
> 4 files changed, 1400 insertions(+)
> ---
> base-commit: d61a00525464bfc5fe92c6ad713350988e492b88
> change-id: 20240920-jg-blackrock-for-upstream-7c7aca20e832
>
> Best regards,
> --
> Jens Glathe <jens.glathe@oldschoolsolutions.biz>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/sc8280xp-microsoft-blackrock.dtb' for 20241013-jg-blackrock-for-upstream-v3-0-839d3483a8e7@oldschoolsolutions.biz:
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: pcie@1c00000: Unevaluated properties are not allowed ('pcie-vdda-supply', 'vdda-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@1c06000: 'phy-supply', 'pll-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: pcie@1c20000: max-link-speed: 16 is not one of [1, 2, 3, 4]
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: pcie@1c20000: Unevaluated properties are not allowed ('#address-cells', '#interrupt-cells', '#size-cells', 'aspm-no-l0s', 'bus-range', 'device_type', 'dma-coherent', 'interconnect-names', 'interconnects', 'interrupt-map', 'interrupt-map-mask', 'linux,pci-domain', 'max-link-speed', 'msi-map', 'num-lanes', 'pcie-vdda-supply', 'pcie@0', 'perst-gpios', 'phy-names', 'phys', 'power-domains', 'ranges', 'required-opps', 'vdda-supply', 'vddpe-3v3-supply', 'wake-gpios' were unexpected)
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: pcie@1c20000: max-link-speed: 16 is not one of [1, 2, 3, 4]
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@1c24000: 'phy-supply', 'pll-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@88e5000: 'phy-supply', 'vdda-phy-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@88e7000: 'phy-supply', 'vdda-phy-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@88e8000: 'phy-supply', 'vdda-phy-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@88e9000: 'phy-supply', 'vdda-phy-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@88ea000: 'phy-supply', 'vdda-phy-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@88ef000: 'phy-supply', 'pll-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@88f1000: 'phy-supply', 'pll-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@88eb000: 'phy-supply', 'pll-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@8902000: 'phy-supply', 'vdda-phy-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@8903000: 'phy-supply', 'pll-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: usb@a4f8800: usb@a400000:phy-names: 'oneOf' conditional failed, one must be fixed:
'usb2-port0' is not one of ['usb2-phy', 'usb3-phy']
'usb2-port0' does not match '^usb(2-([0-9]|1[0-4])|3-[0-3])$'
'usb3-port0' is not one of ['usb2-phy', 'usb3-phy']
'usb3-port0' does not match '^usb(2-([0-9]|1[0-4])|3-[0-3])$'
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: usb@a400000: phy-names: 'oneOf' conditional failed, one must be fixed:
'usb2-port0' is not one of ['usb2-phy', 'usb3-phy']
'usb2-port0' does not match '^usb(2-([0-9]|1[0-4])|3-[0-3])$'
'usb3-port0' is not one of ['usb2-phy', 'usb3-phy']
'usb3-port0' does not match '^usb(2-([0-9]|1[0-4])|3-[0-3])$'
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dtb: phy@aec2a00: 'phy-supply', 'pll-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#
^ permalink raw reply [flat|nested] 11+ messages in thread