public inbox for linux-aspeed@lists.ozlabs.org
 help / color / mirror / Atom feed
From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 07/10] media: aspeed: refine interrupt handling logic
Date: Fri, 31 May 2019 15:15:45 -0700	[thread overview]
Message-ID: <20190531221548.14757-8-jae.hyun.yoo@linux.intel.com> (raw)
In-Reply-To: <20190531221548.14757-1-jae.hyun.yoo@linux.intel.com>

There are cases that interrupt bits are cleared by a 500ms delayed
work which causes unnecessary irq calls. Also, the current
interrupt handler returns IRQ_HANDLED always but it should return
IRQ_NONE if there is any unhandled interrupt. So this commit
refines the interrupt handling logic to fix these issues.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
---
v2 -> v3:
 None.

v1 -> v2:
 None.

 drivers/media/platform/aspeed-video.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 1cba582918cc..c0b889141b8f 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -488,6 +488,7 @@ static void aspeed_video_off(struct aspeed_video *video)
 
 	/* Disable interrupts */
 	aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
+	aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xffffffff);
 
 	/* Turn off the relevant clocks */
 	clk_disable(video->vclk);
@@ -554,7 +555,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 					    VE_INTERRUPT_MODE_DETECT, 0);
 			aspeed_video_write(video, VE_INTERRUPT_STATUS,
 					   VE_INTERRUPT_MODE_DETECT);
-
+			sts &= ~VE_INTERRUPT_MODE_DETECT;
 			set_bit(VIDEO_MODE_DETECT_DONE, &video->flags);
 			wake_up_interruptible_all(&video->wait);
 		} else {
@@ -599,12 +600,12 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 				    VE_INTERRUPT_COMP_COMPLETE, 0);
 		aspeed_video_write(video, VE_INTERRUPT_STATUS,
 				   VE_INTERRUPT_COMP_COMPLETE);
-
+		sts &= ~VE_INTERRUPT_COMP_COMPLETE;
 		if (test_bit(VIDEO_STREAMING, &video->flags) && buf)
 			aspeed_video_start_frame(video);
 	}
 
-	return IRQ_HANDLED;
+	return sts ? IRQ_NONE : IRQ_HANDLED;
 }
 
 static void aspeed_video_check_and_set_polarity(struct aspeed_video *video)
-- 
2.21.0


  parent reply	other threads:[~2019-05-31 22:15 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-31 22:15 [PATCH v3 00/10] Improve stability and add bug fixes of Aspeed video engine driver Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 01/10] media: aspeed: fix a kernel warning on clk control Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 02/10] media: aspeed: refine clock control logic Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 03/10] media: aspeed: change irq to threaded irq Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 04/10] media: aspeed: remove IRQF_SHARED flag Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 05/10] media: aspeed: reduce noisy log printing outs Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 06/10] media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE Jae Hyun Yoo
2019-05-31 22:15 ` Jae Hyun Yoo [this message]
2019-05-31 22:15 ` [PATCH v3 08/10] media: aspeed: remove source buffer allocation before mode detection Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 09/10] media: aspeed: use different delays for triggering VE H/W reset Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 10/10] media: aspeed: add a workaround to fix a silicon bug Jae Hyun Yoo
2019-06-06  0:53   ` Jae Hyun Yoo
2019-06-12  7:17     ` Hans Verkuil
2019-06-12 15:03       ` Eddie James
2019-06-12 16:13         ` Jae Hyun Yoo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190531221548.14757-8-jae.hyun.yoo@linux.intel.com \
    --to=jae.hyun.yoo@linux.intel.com \
    --cc=linux-aspeed@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox