From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 08/10] media: aspeed: remove source buffer allocation before mode detection
Date: Fri, 31 May 2019 15:15:46 -0700 [thread overview]
Message-ID: <20190531221548.14757-9-jae.hyun.yoo@linux.intel.com> (raw)
In-Reply-To: <20190531221548.14757-1-jae.hyun.yoo@linux.intel.com>
Mode detection doesn't require source buffer allocation so this
commit removes that.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
---
v2 -> v3:
Corrected re-allocation logic of source buffers.
v1 -> v2:
New.
drivers/media/platform/aspeed-video.c | 37 ++++-----------------------
1 file changed, 5 insertions(+), 32 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index c0b889141b8f..d6708ddb0391 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -731,27 +731,6 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
det->height = MIN_HEIGHT;
video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
- /*
- * Since we need max buffer size for detection, free the second source
- * buffer first.
- */
- if (video->srcs[1].size)
- aspeed_video_free_buf(video, &video->srcs[1]);
-
- if (video->srcs[0].size < VE_MAX_SRC_BUFFER_SIZE) {
- if (video->srcs[0].size)
- aspeed_video_free_buf(video, &video->srcs[0]);
-
- if (!aspeed_video_alloc_buf(video, &video->srcs[0],
- VE_MAX_SRC_BUFFER_SIZE)) {
- dev_err(video->dev,
- "Failed to allocate source buffers\n");
- return;
- }
- }
-
- aspeed_video_write(video, VE_SRC0_ADDR, video->srcs[0].dma);
-
do {
if (tries) {
set_current_state(TASK_INTERRUPTIBLE);
@@ -871,20 +850,14 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
size *= 4;
- if (size == video->srcs[0].size / 2) {
- aspeed_video_write(video, VE_SRC1_ADDR,
- video->srcs[0].dma + size);
- } else if (size == video->srcs[0].size) {
- if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
- goto err_mem;
-
- aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
- } else {
- aspeed_video_free_buf(video, &video->srcs[0]);
+ if (size != video->srcs[0].size) {
+ if (video->srcs[0].size)
+ aspeed_video_free_buf(video, &video->srcs[0]);
+ if (video->srcs[1].size)
+ aspeed_video_free_buf(video, &video->srcs[1]);
if (!aspeed_video_alloc_buf(video, &video->srcs[0], size))
goto err_mem;
-
if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
goto err_mem;
--
2.21.0
next prev parent reply other threads:[~2019-05-31 22:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-31 22:15 [PATCH v3 00/10] Improve stability and add bug fixes of Aspeed video engine driver Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 01/10] media: aspeed: fix a kernel warning on clk control Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 02/10] media: aspeed: refine clock control logic Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 03/10] media: aspeed: change irq to threaded irq Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 04/10] media: aspeed: remove IRQF_SHARED flag Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 05/10] media: aspeed: reduce noisy log printing outs Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 06/10] media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 07/10] media: aspeed: refine interrupt handling logic Jae Hyun Yoo
2019-05-31 22:15 ` Jae Hyun Yoo [this message]
2019-05-31 22:15 ` [PATCH v3 09/10] media: aspeed: use different delays for triggering VE H/W reset Jae Hyun Yoo
2019-05-31 22:15 ` [PATCH v3 10/10] media: aspeed: add a workaround to fix a silicon bug Jae Hyun Yoo
2019-06-06 0:53 ` Jae Hyun Yoo
2019-06-12 7:17 ` Hans Verkuil
2019-06-12 15:03 ` Eddie James
2019-06-12 16:13 ` Jae Hyun Yoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190531221548.14757-9-jae.hyun.yoo@linux.intel.com \
--to=jae.hyun.yoo@linux.intel.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox