[PATCH 0/3] Add Ufispace NCPLite platform device tree

[PATCH 0/3] Add Ufispace NCPLite platform device tree

[Jordan Chang]

Add Ufispace NCPLite platform device tree, and add the compatible
string in dt-bindings files.

Jordan Chang (3):
  dt-bindings: vendor-prefixes: Add prefix for Ufi Space
  dt-bindings: arm: aspeed: document Ufispace NCPLite BMC
  ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC

 .../bindings/arm/aspeed/aspeed.yaml           |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/aspeed-bmc-ufispace-ncplite.dts  | 360 ++++++++++++++++++
 4 files changed, 364 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts

-- 
2.39.0


-- 
******************************
This e-mail is confidential. If you are not 
the intended recipient, you must not disclose, distribute or use the 
information in it as this could be a breach of confidentiality.If you have 
received this message in error, please advise us immediately by return 
e-mail and delete the document. The address from which this message has 
been sent is strictly for business mail only and the company reserves the 
right to monitor the contents of communications and take action where and 
when it is deemed necessary.
Thank you for your co-operation.

[PATCH 1/3] dt-bindings: vendor-prefixes: Add prefix for Ufi Space

[Jordan Chang]

Add a vendor prefix for Ufi Space (https://www.ufispace.com).

Signed-off-by: Jordan Chang <jordan.chang@ufispace.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 2f0151e9f6be..ab0dd1cb5ede 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1344,6 +1344,8 @@ patternProperties:
     description: Ubiquiti Networks
   "^udoo,.*":
     description: Udoo
+  "^ufispace,.*":
+    description: Ufi Space Co., Ltd.
   "^ugoos,.*":
     description: Ugoos Industrial Co., Ltd.
   "^uniwest,.*":
-- 
2.39.0


-- 
******************************
This e-mail is confidential. If you are not 
the intended recipient, you must not disclose, distribute or use the 
information in it as this could be a breach of confidentiality.If you have 
received this message in error, please advise us immediately by return 
e-mail and delete the document. The address from which this message has 
been sent is strictly for business mail only and the company reserves the 
right to monitor the contents of communications and take action where and 
when it is deemed necessary.
Thank you for your co-operation.

[PATCH 2/3] dt-bindings: arm: aspeed: document Ufispace NCPLite BMC

[Jordan Chang]

Document Ufispace NCPLite board compatible.

Signed-off-by: Jordan Chang <jordan.chang@ufispace.com>
---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 272626937ecd..0f180aad3a09 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -85,6 +85,7 @@ properties:
               - jabil,rbp-bmc
               - nuvia,dc-scm-bmc
               - quanta,s6q-bmc
+              - ufispace,ncplite-bmc
           - const: aspeed,ast2600
 
 additionalProperties: true
-- 
2.39.0


-- 
******************************
This e-mail is confidential. If you are not 
the intended recipient, you must not disclose, distribute or use the 
information in it as this could be a breach of confidentiality.If you have 
received this message in error, please advise us immediately by return 
e-mail and delete the document. The address from which this message has 
been sent is strictly for business mail only and the company reserves the 
right to monitor the contents of communications and take action where and 
when it is deemed necessary.
Thank you for your co-operation.

[PATCH 3/3] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC

[Jordan Chang]

Add initial version of device tree for Ufispace NCPlite platform
which is equipped with AST2600-based BMC.

Signed-off-by: Jordan Chang <jordan.chang@ufispace.com>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/aspeed-bmc-ufispace-ncplite.dts  | 360 ++++++++++++++++++
 2 files changed, 361 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 2ee9c043218b..d26e0651e805 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1626,6 +1626,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-inventec-transformers.dtb \
 	aspeed-bmc-tyan-s7106.dtb \
 	aspeed-bmc-tyan-s8036.dtb \
+	aspeed-bmc-ufispace-ncplite.dtb \
 	aspeed-bmc-vegman-n110.dtb \
 	aspeed-bmc-vegman-rx20.dtb \
 	aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
new file mode 100644
index 000000000000..7ab29129d1e4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2022 Ufispace Co., Ltd.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ufispace NCPLite BMC";
+	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		fan-status-int-l {
+			label = "fan-status-int-l";
+			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(M, 2)>;
+		};
+
+		allpwr-good {
+			label = "allpwr-good";
+			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(V, 4)>;
+		};
+
+		psu0-alert-n {
+			label = "psu0-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 1)>;
+		};
+
+		psu1-alert-n {
+			label = "psu1-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 2)>;
+		};
+
+		int-thermal-alert {
+			label = "int-thermal-alert";
+			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 2)>;
+		};
+
+		cpu-caterr-l {
+			label = "cpu-caterr-l";
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 3)>;
+		};
+
+		cpu-thermtrip-l {
+			label = "cpu-thermtrip-l";
+			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 5)>;
+		};
+
+		psu0-presence-l {
+			label = "psu0-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		psu1-presence-l {
+			label = "psu1-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		psu0-power-ok {
+			label = "psu0-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 4)>;
+		};
+
+		psu1-power-ok {
+			label = "psu1-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+	};
+};
+
+&mac2 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&fmc {
+	status = "okay";
+	flash at 0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash at 1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_reset {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&udc {
+	status = "okay";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm75 at 48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	lm75 at 49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	lm86 at 4c {
+		compatible = "national,lm86";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	lm75 at 4f {
+		cpmpatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	fan_ioexp: pca9535 at 20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","presence-fan0","",
+		"","","presence-fan1","",
+		"","","presence-fan2","",
+		"","","presence-fan3","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom at 50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	psu at 58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom at 50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	psu at 58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom at 50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	lm75 at 4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","reset-button","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"power-chassis-control0","power-chassis-control1","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","power-chassis-good","","","";
+};
-- 
2.39.0


-- 
******************************
This e-mail is confidential. If you are not 
the intended recipient, you must not disclose, distribute or use the 
information in it as this could be a breach of confidentiality.If you have 
received this message in error, please advise us immediately by return 
e-mail and delete the document. The address from which this message has 
been sent is strictly for business mail only and the company reserves the 
right to monitor the contents of communications and take action where and 
when it is deemed necessary.
Thank you for your co-operation.

[PATCH 1/3] dt-bindings: vendor-prefixes: Add prefix for Ufi Space

[Krzysztof Kozlowski]

On 19/01/2023 11:21, Jordan Chang wrote:
> |This e-mail is confidential. |

Sorry, we cannot work with confidential emails. Everything you send to
mailing list is public and must not be confidential.

Best regards,
Krzysztof

[PATCH 2/3] dt-bindings: arm: aspeed: document Ufispace NCPLite BMC

[Krzysztof Kozlowski]

On 19/01/2023 11:21, Jordan Chang wrote:
> |This e-mail is confidential. If you are not the intended recipient, you
> must not disclose, |

Similar problem. Please drop and resend.

Best regards,
Krzysztof

[PATCH 3/3] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC

[Krzysztof Kozlowski]

On 19/01/2023 11:21, Jordan Chang wrote:
> Add initial version of device tree for Ufispace NCPlite platform
> which is equipped with AST2600-based BMC.
> 
> Signed-off-by: Jordan Chang <jordan.chang@ufispace.com>
> ---
>  arch/arm/boot/dts/Makefile                    |   1 +
>  .../boot/dts/aspeed-bmc-ufispace-ncplite.dts  | 360 ++++++++++++++++++
>  2 files changed, 361 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 2ee9c043218b..d26e0651e805 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1626,6 +1626,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>  	aspeed-bmc-inventec-transformers.dtb \
>  	aspeed-bmc-tyan-s7106.dtb \
>  	aspeed-bmc-tyan-s8036.dtb \
> +	aspeed-bmc-ufispace-ncplite.dtb \
>  	aspeed-bmc-vegman-n110.dtb \
>  	aspeed-bmc-vegman-rx20.dtb \
>  	aspeed-bmc-vegman-sx20.dtb
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
> new file mode 100644
> index 000000000000..7ab29129d1e4
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
> @@ -0,0 +1,360 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright (c) 2022 Ufispace Co., Ltd.
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> +	model = "Ufispace NCPLite BMC";
> +	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
> +
> +	aliases {
> +		serial4 = &uart5;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart5;
> +		bootargs = "console=ttyS4,115200n8 earlycon";

earlycon is debugging tool and not suitable for mainline, wide usage. Drop.

Actually drop entire bootags and use proper stdout-path.

> +	};
> +
> +	memory at 80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x80000000>;
> +	};
> +
> +	iio-hwmon {
> +		compatible = "iio-hwmon";
> +		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
> +			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
> +			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
> +			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		fan-status-int-l {

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

These will bring warnings. Missing generic name,

> +			label = "fan-status-int-l";
> +			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(M, 2)>;
> +		};
> +
> +		allpwr-good {
> +			label = "allpwr-good";
> +			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
> +			linux,code = <ASPEED_GPIO(V, 4)>;
> +		};
> +
> +		psu0-alert-n {
> +			label = "psu0-alert-n";
> +			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(V, 1)>;
> +		};
> +
> +		psu1-alert-n {
> +			label = "psu1-alert-n";
> +			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(V, 2)>;
> +		};
> +
> +		int-thermal-alert {
> +			label = "int-thermal-alert";
> +			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(P, 2)>;
> +		};
> +
> +		cpu-caterr-l {
> +			label = "cpu-caterr-l";
> +			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(N, 3)>;
> +		};
> +
> +		cpu-thermtrip-l {
> +			label = "cpu-thermtrip-l";
> +			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(V, 5)>;
> +		};
> +
> +		psu0-presence-l {
> +			label = "psu0-presence-l";
> +			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(F, 6)>;
> +		};
> +
> +		psu1-presence-l {
> +			label = "psu1-presence-l";
> +			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(F, 7)>;
> +		};
> +
> +		psu0-power-ok {
> +			label = "psu0-power-ok";
> +			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
> +			linux,code = <ASPEED_GPIO(M, 4)>;
> +		};
> +
> +		psu1-power-ok {
> +			label = "psu1-power-ok";
> +			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
> +			linux,code = <ASPEED_GPIO(M, 5)>;
> +		};
> +	};
> +
> +	gpio-keys-polled {
> +		compatible = "gpio-keys-polled";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		poll-interval = <1000>;
> +
> +		fan0-presence {

Same problem - not tested.

> +			label = "fan0-presence";
> +			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
> +			linux,code = <2>;
> +		};
> +
> +		fan1-presence {
> +			label = "fan1-presence";
> +			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
> +			linux,code = <6>;
> +		};
> +
> +		fan2-presence {
> +			label = "fan2-presence";
> +			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
> +			linux,code = <10>;
> +		};
> +
> +		fan3-presence {
> +			label = "fan3-presence";
> +			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
> +			linux,code = <14>;
> +		};
> +	};
> +};
> +
> +&mac2 {
> +	status = "okay";
> +	use-ncsi;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_rmii3_default>;
> +	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
> +		 <&syscon ASPEED_CLK_MAC3RCLK>;
> +	clock-names = "MACCLK", "RCLK";
> +};
> +
> +&fmc {
> +	status = "okay";
> +	flash at 0 {
> +		status = "okay";
> +		m25p,fast-read;
> +		label = "bmc";
> +		spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64.dtsi"
> +	};
> +
> +	flash at 1 {
> +		status = "okay";
> +		m25p,fast-read;
> +		label = "alt-bmc";
> +		spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64-alt.dtsi"
> +	};
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	status = "okay";
> +};
> +
> +&uart5 {
> +	status = "okay";
> +};
> +
> +&kcs3 {
> +	status = "okay";
> +	aspeed,lpc-io-reg = <0xca2>;
> +};
> +
> +&lpc_reset {
> +	status = "okay";
> +};
> +
> +&lpc_ctrl {
> +	status = "okay";
> +};
> +
> +&uart_routing {
> +	status = "okay";
> +};
> +
> +&wdt1 {
> +	status = "okay";
> +};
> +
> +&wdt2 {
> +	status = "okay";
> +};
> +
> +&peci0 {
> +	status = "okay";
> +};
> +
> +&udc {
> +	status = "okay";
> +};
> +
> +&adc0 {
> +	vref = <2500>;
> +	status = "okay";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> +		&pinctrl_adc2_default &pinctrl_adc3_default
> +		&pinctrl_adc4_default &pinctrl_adc5_default
> +		&pinctrl_adc6_default &pinctrl_adc7_default>;
> +};
> +
> +&adc1 {
> +	vref = <2500>;
> +	status = "okay";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
> +		&pinctrl_adc10_default &pinctrl_adc11_default
> +		&pinctrl_adc12_default &pinctrl_adc13_default
> +		&pinctrl_adc14_default &pinctrl_adc15_default>;
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +
> +	lm75 at 48 {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "national,lm75";
> +		reg = <0x48>;
> +	};
> +
> +	lm75 at 49 {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "national,lm75";
> +		reg = <0x49>;
> +	};
> +
> +	lm86 at 4c {

and so on...

> +		compatible = "national,lm86";
> +		reg = <0x4c>;
> +	};
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +
> +	lm75 at 4f {

as well

> +		cpmpatible = "national,lm75";
> +		reg = <0x4f>;
> +	};
> +
> +	fan_ioexp: pca9535 at 20 {

and here

> +		compatible = "nxp,pca9535";
> +		reg = <0x20>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		gpio-line-names =
> +		"","","presence-fan0","",
> +		"","","presence-fan1","",
> +		"","","presence-fan2","",
> +		"","","presence-fan3","";
> +	};
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +
> +	eeprom at 50 {
> +		compatible = "atmel,24c128";
> +		reg = <0x50>;
> +		pagesize = <64>;
> +	};
> +};
> +
> +&i2c4 {
> +	status = "okay";
> +
> +	psu at 58 {
> +		compatible = "pmbus";

Where is this compatible documented?

Did you run checkpatch? Did it pass without warnings?


> +		reg = <0x58>;
> +	};
> +
> +	eeprom at 50 {
> +		compatible = "atmel,24c02";
> +		reg = <0x50>;
> +		pagesize = <1>;
> +	};
> +};
> +
> +&i2c5 {
> +	status = "okay";
> +
> +	psu at 58 {
> +		compatible = "pmbus";
> +		reg = <0x58>;
> +	};
> +
> +	eeprom at 50 {
> +		compatible = "atmel,24c02";
> +		reg = <0x50>;
> +		pagesize = <1>;
> +	};
> +};
> +
> +&i2c8 {
> +	status = "okay";
> +};
> +
> +&i2c10 {
> +	status = "okay";
> +
> +	lm75 at 4d {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "national,lm75";
> +		reg = <0x4d>;
> +	};
> +};
Best regards,
Krzysztof

[PATCH 1/3] dt-bindings: vendor-prefixes: Add prefix for Ufi Space

[Jordan Chang]

Hi Krzysztof,

Thanks for your comment. I will resend the patch.

Best regards,
Jordan Chang


On Thu, Jan 19, 2023 at 6:57 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 19/01/2023 11:21, Jordan Chang wrote:
> > |This e-mail is confidential. |
>
> Sorry, we cannot work with confidential emails. Everything you send to
> mailing list is public and must not be confidential.
>
> Best regards,
> Krzysztof
>

[PATCH 3/3] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC

[Jordan Chang]

Hi Krzysztof,

Thanks for your comments.

On Thu, Jan 19, 2023 at 7:00 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 19/01/2023 11:21, Jordan Chang wrote:
> > Add initial version of device tree for Ufispace NCPlite platform
> > which is equipped with AST2600-based BMC.
> >
> > Signed-off-by: Jordan Chang <jordan.chang@ufispace.com>
> > ---
> >  arch/arm/boot/dts/Makefile                    |   1 +
> >  .../boot/dts/aspeed-bmc-ufispace-ncplite.dts  | 360 ++++++++++++++++++
> >  2 files changed, 361 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 2ee9c043218b..d26e0651e805 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1626,6 +1626,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> >       aspeed-bmc-inventec-transformers.dtb \
> >       aspeed-bmc-tyan-s7106.dtb \
> >       aspeed-bmc-tyan-s8036.dtb \
> > +     aspeed-bmc-ufispace-ncplite.dtb \
> >       aspeed-bmc-vegman-n110.dtb \
> >       aspeed-bmc-vegman-rx20.dtb \
> >       aspeed-bmc-vegman-sx20.dtb
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
> > new file mode 100644
> > index 000000000000..7ab29129d1e4
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
> > @@ -0,0 +1,360 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +// Copyright (c) 2022 Ufispace Co., Ltd.
> > +/dts-v1/;
> > +
> > +#include "aspeed-g6.dtsi"
> > +#include <dt-bindings/i2c/i2c.h>
> > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > +
> > +/ {
> > +     model = "Ufispace NCPLite BMC";
> > +     compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
> > +
> > +     aliases {
> > +             serial4 = &uart5;
> > +     };
> > +
> > +     chosen {
> > +             stdout-path = &uart5;
> > +             bootargs = "console=ttyS4,115200n8 earlycon";
>
> earlycon is debugging tool and not suitable for mainline, wide usage. Drop.
>
> Actually drop entire bootags and use proper stdout-path.
>
Will drop the line.

> > +     };
> > +
> > +     memory at 80000000 {
> > +             device_type = "memory";
> > +             reg = <0x80000000 0x80000000>;
> > +     };
> > +
> > +     iio-hwmon {
> > +             compatible = "iio-hwmon";
> > +             io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
> > +                           <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
> > +                           <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
> > +                           <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
> > +     };
> > +
> > +     gpio-keys {
> > +             compatible = "gpio-keys";
> > +
> > +             fan-status-int-l {
>
> Does not look like you tested the DTS against bindings. Please run `make
> dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
> for instructions).
>
> These will bring warnings. Missing generic name,
>
I have run the `make dtbs_check` command, and did not notice the warning
message 'Missing generic name'. It shows lots of compatible failed messages.
- /ahb/ftgmac at 1e670000: failed to match any schema with compatible:

> > +                     label = "fan-status-int-l";
> > +                     gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
> > +                     linux,code = <ASPEED_GPIO(M, 2)>;
> > +             };
> > +
> > +             allpwr-good {
> > +                     label = "allpwr-good";
> > +                     gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
> > +                     linux,code = <ASPEED_GPIO(V, 4)>;
> > +             };
> > +
> > +             psu0-alert-n {
> > +                     label = "psu0-alert-n";
> > +                     gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
> > +                     linux,code = <ASPEED_GPIO(V, 1)>;
> > +             };
> > +
> > +             psu1-alert-n {
> > +                     label = "psu1-alert-n";
> > +                     gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
> > +                     linux,code = <ASPEED_GPIO(V, 2)>;
> > +             };
> > +
> > +             int-thermal-alert {
> > +                     label = "int-thermal-alert";
> > +                     gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
> > +                     linux,code = <ASPEED_GPIO(P, 2)>;
> > +             };
> > +
> > +             cpu-caterr-l {
> > +                     label = "cpu-caterr-l";
> > +                     gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
> > +                     linux,code = <ASPEED_GPIO(N, 3)>;
> > +             };
> > +
> > +             cpu-thermtrip-l {
> > +                     label = "cpu-thermtrip-l";
> > +                     gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
> > +                     linux,code = <ASPEED_GPIO(V, 5)>;
> > +             };
> > +
> > +             psu0-presence-l {
> > +                     label = "psu0-presence-l";
> > +                     gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
> > +                     linux,code = <ASPEED_GPIO(F, 6)>;
> > +             };
> > +
> > +             psu1-presence-l {
> > +                     label = "psu1-presence-l";
> > +                     gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
> > +                     linux,code = <ASPEED_GPIO(F, 7)>;
> > +             };
> > +
> > +             psu0-power-ok {
> > +                     label = "psu0-power-ok";
> > +                     gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
> > +                     linux,code = <ASPEED_GPIO(M, 4)>;
> > +             };
> > +
> > +             psu1-power-ok {
> > +                     label = "psu1-power-ok";
> > +                     gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
> > +                     linux,code = <ASPEED_GPIO(M, 5)>;
> > +             };
> > +     };
> > +
> > +     gpio-keys-polled {
> > +             compatible = "gpio-keys-polled";
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +             poll-interval = <1000>;
> > +
> > +             fan0-presence {
>
> Same problem - not tested.
>
> > +                     label = "fan0-presence";
> > +                     gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
> > +                     linux,code = <2>;
> > +             };
> > +
> > +             fan1-presence {
> > +                     label = "fan1-presence";
> > +                     gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
> > +                     linux,code = <6>;
> > +             };
> > +
> > +             fan2-presence {
> > +                     label = "fan2-presence";
> > +                     gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
> > +                     linux,code = <10>;
> > +             };
> > +
> > +             fan3-presence {
> > +                     label = "fan3-presence";
> > +                     gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
> > +                     linux,code = <14>;
> > +             };
> > +     };
> > +};
> > +
> > +&mac2 {
> > +     status = "okay";
> > +     use-ncsi;
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_rmii3_default>;
> > +     clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
> > +              <&syscon ASPEED_CLK_MAC3RCLK>;
> > +     clock-names = "MACCLK", "RCLK";
> > +};
> > +
> > +&fmc {
> > +     status = "okay";
> > +     flash at 0 {
> > +             status = "okay";
> > +             m25p,fast-read;
> > +             label = "bmc";
> > +             spi-max-frequency = <50000000>;
> > +#include "openbmc-flash-layout-64.dtsi"
> > +     };
> > +
> > +     flash at 1 {
> > +             status = "okay";
> > +             m25p,fast-read;
> > +             label = "alt-bmc";
> > +             spi-max-frequency = <50000000>;
> > +#include "openbmc-flash-layout-64-alt.dtsi"
> > +     };
> > +};
> > +
> > +&uart1 {
> > +     status = "okay";
> > +};
> > +
> > +&uart4 {
> > +     status = "okay";
> > +};
> > +
> > +&uart5 {
> > +     status = "okay";
> > +};
> > +
> > +&kcs3 {
> > +     status = "okay";
> > +     aspeed,lpc-io-reg = <0xca2>;
> > +};
> > +
> > +&lpc_reset {
> > +     status = "okay";
> > +};
> > +
> > +&lpc_ctrl {
> > +     status = "okay";
> > +};
> > +
> > +&uart_routing {
> > +     status = "okay";
> > +};
> > +
> > +&wdt1 {
> > +     status = "okay";
> > +};
> > +
> > +&wdt2 {
> > +     status = "okay";
> > +};
> > +
> > +&peci0 {
> > +     status = "okay";
> > +};
> > +
> > +&udc {
> > +     status = "okay";
> > +};
> > +
> > +&adc0 {
> > +     vref = <2500>;
> > +     status = "okay";
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> > +             &pinctrl_adc2_default &pinctrl_adc3_default
> > +             &pinctrl_adc4_default &pinctrl_adc5_default
> > +             &pinctrl_adc6_default &pinctrl_adc7_default>;
> > +};
> > +
> > +&adc1 {
> > +     vref = <2500>;
> > +     status = "okay";
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
> > +             &pinctrl_adc10_default &pinctrl_adc11_default
> > +             &pinctrl_adc12_default &pinctrl_adc13_default
> > +             &pinctrl_adc14_default &pinctrl_adc15_default>;
> > +};
> > +
> > +&i2c0 {
> > +     status = "okay";
> > +};
> > +
> > +&i2c1 {
> > +     status = "okay";
> > +
> > +     lm75 at 48 {
>
> Node names should be generic.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Will rename the node with the generic name.

> > +             compatible = "nxp,pca9535";
> > +             reg = <0x20>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +             gpio-controller;
> > +             #gpio-cells = <2>;
> > +
> > +             gpio-line-names =
> > +             "","","presence-fan0","",
> > +             "","","presence-fan1","",
> > +             "","","presence-fan2","",
> > +             "","","presence-fan3","";
> > +     };
> > +};
> > +
> > +&i2c3 {
> > +     status = "okay";
> > +
> > +     eeprom at 50 {
> > +             compatible = "atmel,24c128";
> > +             reg = <0x50>;
> > +             pagesize = <64>;
> > +     };
> > +};
> > +
> > +&i2c4 {
> > +     status = "okay";
> > +
> > +     psu at 58 {
> > +             compatible = "pmbus";
>
> Where is this compatible documented?
Can not find the corresponding document.
>
> Did you run checkpatch? Did it pass without warnings?
Yes, I did run the ./scripts/checkpatch.pl and there were two warnings left.
- WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
- WARNING: line length of 104 exceeds 100 columns
I just ignore those warnings that Joel has informed me in the previous
mail loop.

Best regards,
Jordan Chang

>
>
> > +             reg = <0x58>;
> > +     };
> > +
> > +     eeprom at 50 {
> > +             compatible = "atmel,24c02";
> > +             reg = <0x50>;
> > +             pagesize = <1>;
> > +     };
> > +};
> > +
> > +&i2c5 {
> > +     status = "okay";
> > +
> > +     psu at 58 {
> > +             compatible = "pmbus";
> > +             reg = <0x58>;
> > +     };
> > +
> > +     eeprom at 50 {
> > +             compatible = "atmel,24c02";
> > +             reg = <0x50>;
> > +             pagesize = <1>;
> > +     };
> > +};
> > +
> > +&i2c8 {
> > +     status = "okay";
> > +};
> > +
> > +&i2c10 {
> > +     status = "okay";
> > +
> > +     lm75 at 4d {
>
> Node names should be generic.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
> > +             compatible = "national,lm75";
> > +             reg = <0x4d>;
> > +     };
> > +};
> Best regards,
> Krzysztof
>

[PATCH 3/3] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC

[Krzysztof Kozlowski]

On 01/02/2023 11:06, Jordan Chang wrote:
>>> +     gpio-keys {
>>> +             compatible = "gpio-keys";
>>> +
>>> +             fan-status-int-l {
>>
>> Does not look like you tested the DTS against bindings. Please run `make
>> dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
>> for instructions).
>>
>> These will bring warnings. Missing generic name,
>>
> I have run the `make dtbs_check` command, and did not notice the warning
> message 'Missing generic name'. It shows lots of compatible failed messages.
> - /ahb/ftgmac at 1e670000: failed to match any schema with compatible:

You can run it with DT_SCHEMA_FILES=gpio-keys

> 
>>> +                     label = "fan-status-int-l";
>>> +                     gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
>>> +                     linux,code = <ASPEED_GPIO(M, 2)>;
>>> +             };
>>> +

(...)

>>> +
>>> +&i2c4 {
>>> +     status = "okay";
>>> +
>>> +     psu at 58 {
>>> +             compatible = "pmbus";
>>
>> Where is this compatible documented?
> Can not find the corresponding document.
>>
>> Did you run checkpatch? Did it pass without warnings?
> Yes, I did run the ./scripts/checkpatch.pl and there were two warnings left.
> - WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> - WARNING: line length of 104 exceeds 100 columns
> I just ignore those warnings that Joel has informed me in the previous
> mail loop.
> 

Hm, is it then correct compatible?


Best regards,
Krzysztof

[PATCH 3/3] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC

[Jordan Chang]

Hi Krzysztof,

Thanks for your reply.

On Wed, Feb 1, 2023 at 6:14 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 01/02/2023 11:06, Jordan Chang wrote:
> >>> +     gpio-keys {
> >>> +             compatible = "gpio-keys";
> >>> +
> >>> +             fan-status-int-l {
> >>
> >> Does not look like you tested the DTS against bindings. Please run `make
> >> dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
> >> for instructions).
> >>
> >> These will bring warnings. Missing generic name,
> >>
> > I have run the `make dtbs_check` command, and did not notice the warning
> > message 'Missing generic name'. It shows lots of compatible failed messages.
> > - /ahb/ftgmac at 1e670000: failed to match any schema with compatible:
>
> You can run it with DT_SCHEMA_FILES=gpio-keys
I see. Will fix the naming issue.

>
>
> >>> +
> >>> +&i2c4 {
> >>> +     status = "okay";
> >>> +
> >>> +     psu at 58 {
> >>> +             compatible = "pmbus";
> >>
> >> Where is this compatible documented?
> > Can not find the corresponding document.
> >>
> >> Did you run checkpatch? Did it pass without warnings?
> > Yes, I did run the ./scripts/checkpatch.pl and there were two warnings left.
> > - WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> > - WARNING: line length of 104 exceeds 100 columns
> > I just ignore those warnings that Joel has informed me in the previous
> > mail loop.
> >
>
> Hm, is it then correct compatible?
I think it might be since it did not show the fail message.

Best regards,
Jordan Chang