From: Finn Thain <fthain@linux-m68k.org>
To: Jens Axboe <axboe@kernel.dk>, Laurent Vivier <laurent@vivier.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
Joshua Thompson <funaho@jurai.org>,
linux-block@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 28/32] swim: Remove unused macro definitions
Date: Mon, 17 Aug 2026 11:17:10 +1000 [thread overview]
Message-ID: <afb0d02ab268dc56fa0d9139032a4e37330cc229.1786929430.git.fthain@linux-m68k.org> (raw)
In-Reply-To: <cover.1786929430.git.fthain@linux-m68k.org>
Also remove the horizontal rule at the end of the macro definitions as
it doesn't any add value, IMO.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
---
drivers/block/swim.c | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/drivers/block/swim.c b/drivers/block/swim.c
index d7182f95c21d..aebebc7f5d60 100644
--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -130,25 +130,14 @@ struct iwm {
/* Bits in handshake register */
-#define MARK_BYTE 0x01
-#define CRC_ZERO 0x02
-#define RDDATA 0x04
#define SENSE 0x08
-#define MOTEN 0x10
-#define ERROR 0x20
#define DAT2BYTE 0x40
#define DAT1BYTE 0x80
/* bits in setup register */
-#define S_INV_WDATA 0x01
-#define S_3_5_SELECT 0x02
-#define S_GCR 0x04
#define S_FCLK_DIV2 0x08
-#define S_ERROR_CORR 0x10
#define S_IBM_DRIVE 0x20
-#define S_GCR_WRITE 0x40
-#define S_TIMEOUT 0x80
/* bits in mode register */
@@ -157,12 +146,9 @@ struct iwm {
#define ENBL2 0x04
#define ACTION 0x08
#define WRITE_MODE 0x10
-#define HEDSEL 0x20
#define ISM_SELECT 0x40
#define MOTON 0x80
-/*----------------------------------------------------------------------------*/
-
enum drive_location {
NO_DRIVE = 0,
INTERNAL_DRIVE = BIT(1),
--
2.52.0
next prev parent reply other threads:[~2026-08-17 1:58 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-17 1:17 [PATCH v2 00/32] block/swim: Fixes and improvements Finn Thain
2026-08-17 1:17 ` [PATCH v2 11/32] swim: Handle FIFO timeout error Finn Thain
2026-08-17 1:17 ` [PATCH v2 19/32] swim: Deduplicate polling loops Finn Thain
2026-08-17 1:17 ` [PATCH v2 04/32] swim: Don't disable drive after every sector Finn Thain
2026-08-17 1:17 ` [PATCH v2 32/32] swim: Unexport global symbols Finn Thain
2026-08-17 1:17 ` Finn Thain [this message]
2026-08-17 1:17 ` [PATCH v2 13/32] swim: Check for CRC errors Finn Thain
2026-08-17 1:17 ` [PATCH v2 25/32] swim: Remove pointless specifiers Finn Thain
2026-08-17 1:17 ` [PATCH v2 03/32] swim: Enable the drive when probing Finn Thain
2026-08-17 1:17 ` [PATCH v2 24/32] swim: Don't search beyond the first data mark Finn Thain
2026-08-17 1:17 ` [PATCH v2 26/32] swim: Move swd initialization Finn Thain
2026-08-17 1:17 ` [PATCH v2 23/32] swim: Don't needlessly re-read sectors Finn Thain
2026-08-17 1:17 ` [PATCH v2 12/32] swim: Simplify return value initialization Finn Thain
2026-08-17 1:17 ` [PATCH v2 31/32] swim: Define symbols for constants Finn Thain
2026-08-17 1:17 ` [PATCH v2 01/32] swim: Assert strobe with stable outputs Finn Thain
2026-08-17 1:17 ` [PATCH v2 20/32] swim: Check drive ready bit Finn Thain
2026-08-17 1:17 ` [PATCH v2 27/32] swim: Add some helpful references Finn Thain
2026-08-17 1:17 ` [PATCH v2 16/32] swim: Fix buffer overflow Finn Thain
2026-08-17 1:17 ` [PATCH v2 10/32] swim: Add track zero recalibration delay Finn Thain
2026-08-17 1:17 ` [PATCH v2 14/32] swim: Check error register during sector read Finn Thain
2026-08-17 1:17 ` [PATCH v2 21/32] swim: Revisit delays Finn Thain
2026-08-17 1:17 ` [PATCH v2 17/32] swim: Convert to blocking queue Finn Thain
2026-08-17 1:17 ` [PATCH v2 07/32] swim: Enable clock divider only where appropriate Finn Thain
2026-08-31 7:38 ` Geert Uytterhoeven
2026-09-01 7:56 ` Finn Thain
2026-09-01 9:10 ` Geert Uytterhoeven
2026-08-17 1:17 ` [PATCH v2 06/32] swim: Configure parameter memory Finn Thain
2026-08-17 1:17 ` [PATCH v2 09/32] swim: Recalibrate when drive is probed Finn Thain
2026-08-17 1:17 ` [PATCH v2 15/32] swim: Don't use the mark register to read data Finn Thain
2026-08-17 1:17 ` [PATCH v2 02/32] swim: Select appropriate drive once only Finn Thain
2026-08-17 1:17 ` [PATCH v2 08/32] swim: Don't start motor until medium is present Finn Thain
2026-08-17 1:17 ` [PATCH v2 05/32] swim: Perform ISM/IWM mode switching according to specs Finn Thain
2026-08-17 1:17 ` [PATCH v2 22/32] swim: Remove pointless mode0 register write Finn Thain
2026-08-17 1:17 ` [PATCH v2 30/32] swim: Define macros for constants Finn Thain
2026-08-17 1:17 ` [PATCH v2 18/32] swim: Remove redundant RELAX actions Finn Thain
2026-08-17 1:17 ` [PATCH v2 29/32] swim: Clean up whitespace Finn Thain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=afb0d02ab268dc56fa0d9139032a4e37330cc229.1786929430.git.fthain@linux-m68k.org \
--to=fthain@linux-m68k.org \
--cc=axboe@kernel.dk \
--cc=funaho@jurai.org \
--cc=geert@linux-m68k.org \
--cc=laurent@vivier.eu \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox