* [Bluez-users] VMWare 5.0 and those timeout messages
@ 2005-09-02 2:07 Clifford Graham
2005-09-03 4:30 ` Mark Rasmussen
2005-09-03 4:30 ` Mark Rasmussen
0 siblings, 2 replies; 4+ messages in thread
From: Clifford Graham @ 2005-09-02 2:07 UTC (permalink / raw)
To: bluez-users
Hello,
I have been having a lot of trouble getting a Broadcom
device working properly under Fedora 4 (Kernel 2.6.11)
in a VMWare 5.0 session. I was wondering if anyone
had managed to get this working? I found an article
in the archives from the beginning of the year with a
similar problem (see
http://sourceforge.net/mailarchive/message.php?msg_id=10640453).
I get the following messages in my /var/log/messages
file.
**************************************************
Sep 1 21:42:22 localhost hcid[2714]: Bluetooth HCI
daemon
Sep 1 21:42:22 localhost kernel: Bluetooth: Core ver
2.7
Sep 1 21:42:22 localhost kernel: NET: Registered
protocol family 31
Sep 1 21:42:22 localhost kernel: Bluetooth: HCI
device and connection manager initialized
Sep 1 21:42:22 localhost kernel: Bluetooth: HCI
socket layer initialized
Sep 1 21:42:39 localhost kernel: usb 1-1: new full
speed USB device using uhci_hcd and address 2
Sep 1 21:42:42 localhost kernel: Bluetooth: Broadcom
Blutonium firmware driver ver 1.0
Sep 1 21:42:42 localhost kernel: usbcore: registered
new driver bcm203x
Sep 1 21:42:42 localhost kernel: Bluetooth: HCI USB
driver ver 2.8
Sep 1 21:42:42 localhost kernel: usbcore: registered
new driver hci_usb
Sep 1 21:42:48 localhost kernel: usb 1-1: USB
disconnect, address 2
Sep 1 21:42:50 localhost kernel: usb 1-1: new full
speed USB device using uhci_hcd and address 3
Sep 1 21:42:51 localhost hcid[2714]: HCI dev 0
registered
Sep 1 21:43:01 localhost hcid[2926]: Can't init
device hci0: Connection timed out (110)
**************************************************
hciconfig -a shows
**************************************************
[root@localhost ~]# hciconfig -a
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO
MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:3 acl:0 sco:0 commands:1 errors:0
**************************************************
and lsusb shows
**************************************************
[root@localhost ~]# lsusb
Bus 001 Device 003: ID 0a5c:2001 Broadcom Corp.
Bus 001 Device 001: ID 0000:0000
**************************************************
I can provide /proc/bus/usb/devices if need be.
I've tried lots of different versions of bluez, and
the old bluefw....nothing seems to work!
Help!
Thank you kindly in advance
Graham
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Bluez-users] VMWare 5.0 and those timeout messages
@ 2005-09-02 3:09 Graham Clifford
0 siblings, 0 replies; 4+ messages in thread
From: Graham Clifford @ 2005-09-02 3:09 UTC (permalink / raw)
To: bluez-users
Hello,
I have been having a lot of trouble getting a Broadcom device working
properly under Fedora 4 (Kernel 2.6.11) in a VMWare 5.0 session. I was
wondering if anyone had managed to get this working? I found an article
in the archives from the beginning of the year with a similar problem
(see http://sourceforge.net/mailarchive/message.php?msg_id=10640453).
I get the following messages in my /var/log/messages file.
**************************************************
Sep 1 21:42:22 localhost hcid[2714]: Bluetooth HCIdaemon
Sep 1 21:42:22 localhost kernel: Bluetooth: Core ver2.7
Sep 1 21:42:22 localhost kernel: NET: Registeredprotocol family 31
Sep 1 21:42:22 localhost kernel: Bluetooth: HCIdevice and connection
manager initialized
Sep 1 21:42:22 localhost kernel: Bluetooth: HCIsocket layer initialized
Sep 1 21:42:39 localhost kernel: usb 1-1: new fullspeed USB device
using uhci_hcd and address 2
Sep 1 21:42:42 localhost kernel: Bluetooth: BroadcomBlutonium firmware
driver ver 1.0
Sep 1 21:42:42 localhost kernel: usbcore: registerednew driver bcm203x
Sep 1 21:42:42 localhost kernel: Bluetooth: HCI USBdriver ver 2.8
Sep 1 21:42:42 localhost kernel: usbcore: registerednew driver hci_usb
Sep 1 21:42:48 localhost kernel: usb 1-1: USBdisconnect, address 2
Sep 1 21:42:50 localhost kernel: usb 1-1: new fullspeed USB device
using uhci_hcd and address 3
Sep 1 21:42:51 localhost hcid[2714]: HCI dev 0registered
Sep 1 21:43:01 localhost hcid[2926]: Can't initdevice hci0: Connection
timed out (110)
**************************************************
hciconfig -a shows
**************************************************
[root@localhost ~]# hciconfig -a
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO
MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:3 acl:0 sco:0 commands:1 errors:0
**************************************************
and lsusb shows
**************************************************
[root@localhost ~]# lsusb
Bus 001 Device 003: ID 0a5c:2001 Broadcom Corp.
Bus 001 Device 001: ID 0000:0000
**************************************************
I can provide /proc/bus/usb/devices if need be.
I've tried lots of different versions of bluez, and
the old bluefw....nothing seems to work!
Help!
Thank you kindly in advance
Graham
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [Bluez-users] VMWare 5.0 and those timeout messages
2005-09-02 2:07 [Bluez-users] VMWare 5.0 and those timeout messages Clifford Graham
@ 2005-09-03 4:30 ` Mark Rasmussen
2005-09-03 4:30 ` Mark Rasmussen
1 sibling, 0 replies; 4+ messages in thread
From: Mark Rasmussen @ 2005-09-03 4:30 UTC (permalink / raw)
To: bluez-users
-----Original Message-----
From: bluez-users-admin@lists.sourceforge.net
[mailto:bluez-users-admin@lists.sourceforge.net] On Behalf Of Clifford
Graham
Sent: Thursday, September 01, 2005 7:07 PM
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] VMWare 5.0 and those timeout messages
Hello,
I have been having a lot of trouble getting a Broadcom
device working properly under Fedora 4 (Kernel 2.6.11)
in a VMWare 5.0 session. I was wondering if anyone
had managed to get this working? I found an article
in the archives from the beginning of the year with a
similar problem (see
http://sourceforge.net/mailarchive/message.php?msg_id=3D10640453).
I get the following messages in my /var/log/messages
file.
**************************************************
Sep 1 21:42:22 localhost hcid[2714]: Bluetooth HCI
daemon
Sep 1 21:42:22 localhost kernel: Bluetooth: Core ver
2.7
Sep 1 21:42:22 localhost kernel: NET: Registered
protocol family 31
Sep 1 21:42:22 localhost kernel: Bluetooth: HCI
device and connection manager initialized
Sep 1 21:42:22 localhost kernel: Bluetooth: HCI
socket layer initialized
Sep 1 21:42:39 localhost kernel: usb 1-1: new full
speed USB device using uhci_hcd and address 2
Sep 1 21:42:42 localhost kernel: Bluetooth: Broadcom
Blutonium firmware driver ver 1.0
Sep 1 21:42:42 localhost kernel: usbcore: registered
new driver bcm203x
Sep 1 21:42:42 localhost kernel: Bluetooth: HCI USB
driver ver 2.8
Sep 1 21:42:42 localhost kernel: usbcore: registered
new driver hci_usb
Sep 1 21:42:48 localhost kernel: usb 1-1: USB
disconnect, address 2
Sep 1 21:42:50 localhost kernel: usb 1-1: new full
speed USB device using uhci_hcd and address 3
Sep 1 21:42:51 localhost hcid[2714]: HCI dev 0
registered
Sep 1 21:43:01 localhost hcid[2926]: Can't init
device hci0: Connection timed out (110)
**************************************************
hciconfig -a shows
**************************************************
[root@localhost ~]# hciconfig -a
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO
MTU: 0:0
DOWN=20
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:3 acl:0 sco:0 commands:1 errors:0
**************************************************
and lsusb shows
**************************************************
[root@localhost ~]# lsusb
Bus 001 Device 003: ID 0a5c:2001 Broadcom Corp.=20
Bus 001 Device 001: ID 0000:0000 =20
**************************************************
I can provide /proc/bus/usb/devices if need be.
I've tried lots of different versions of bluez, and
the old bluefw....nothing seems to work!
Help!
Thank you kindly in advance
Graham=20
=09
____________________________________________________
Start your day with Yahoo! - make it your home page=20
http://www.yahoo.com/r/hs=20
=20
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO =
September
19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile =
&
Plan-Driven Development * Managing Projects & Teams * Testing & QA =
Security
* Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [Bluez-users] VMWare 5.0 and those timeout messages
2005-09-02 2:07 [Bluez-users] VMWare 5.0 and those timeout messages Clifford Graham
2005-09-03 4:30 ` Mark Rasmussen
@ 2005-09-03 4:30 ` Mark Rasmussen
1 sibling, 0 replies; 4+ messages in thread
From: Mark Rasmussen @ 2005-09-03 4:30 UTC (permalink / raw)
To: bluez-users
-----Original Message-----
From: bluez-users-admin@lists.sourceforge.net
[mailto:bluez-users-admin@lists.sourceforge.net] On Behalf Of Clifford
Graham
Sent: Thursday, September 01, 2005 7:07 PM
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] VMWare 5.0 and those timeout messages
Hello,
I have been having a lot of trouble getting a Broadcom
device working properly under Fedora 4 (Kernel 2.6.11)
in a VMWare 5.0 session. I was wondering if anyone
had managed to get this working? I found an article
in the archives from the beginning of the year with a
similar problem (see
http://sourceforge.net/mailarchive/message.php?msg_id=3D10640453).
I get the following messages in my /var/log/messages
file.
**************************************************
Sep 1 21:42:22 localhost hcid[2714]: Bluetooth HCI
daemon
Sep 1 21:42:22 localhost kernel: Bluetooth: Core ver
2.7
Sep 1 21:42:22 localhost kernel: NET: Registered
protocol family 31
Sep 1 21:42:22 localhost kernel: Bluetooth: HCI
device and connection manager initialized
Sep 1 21:42:22 localhost kernel: Bluetooth: HCI
socket layer initialized
Sep 1 21:42:39 localhost kernel: usb 1-1: new full
speed USB device using uhci_hcd and address 2
Sep 1 21:42:42 localhost kernel: Bluetooth: Broadcom
Blutonium firmware driver ver 1.0
Sep 1 21:42:42 localhost kernel: usbcore: registered
new driver bcm203x
Sep 1 21:42:42 localhost kernel: Bluetooth: HCI USB
driver ver 2.8
Sep 1 21:42:42 localhost kernel: usbcore: registered
new driver hci_usb
Sep 1 21:42:48 localhost kernel: usb 1-1: USB
disconnect, address 2
Sep 1 21:42:50 localhost kernel: usb 1-1: new full
speed USB device using uhci_hcd and address 3
Sep 1 21:42:51 localhost hcid[2714]: HCI dev 0
registered
Sep 1 21:43:01 localhost hcid[2926]: Can't init
device hci0: Connection timed out (110)
**************************************************
hciconfig -a shows
**************************************************
[root@localhost ~]# hciconfig -a
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO
MTU: 0:0
DOWN=20
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:3 acl:0 sco:0 commands:1 errors:0
**************************************************
and lsusb shows
**************************************************
[root@localhost ~]# lsusb
Bus 001 Device 003: ID 0a5c:2001 Broadcom Corp.=20
Bus 001 Device 001: ID 0000:0000 =20
**************************************************
I can provide /proc/bus/usb/devices if need be.
I've tried lots of different versions of bluez, and
the old bluefw....nothing seems to work!
Help!
Thank you kindly in advance
Graham=20
=09
____________________________________________________
Start your day with Yahoo! - make it your home page=20
http://www.yahoo.com/r/hs=20
=20
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO =
September
19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile =
&
Plan-Driven Development * Managing Projects & Teams * Testing & QA =
Security
* Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2005-09-03 4:30 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-09-02 2:07 [Bluez-users] VMWare 5.0 and those timeout messages Clifford Graham
2005-09-03 4:30 ` Mark Rasmussen
2005-09-03 4:30 ` Mark Rasmussen
-- strict thread matches above, loose matches on Subject: below --
2005-09-02 3:09 Graham Clifford
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox