[Bluez-users] How to use Bluez with CSR chip ?

["colorant" <colorant@163.com>]

Hi

    I am not sure is this the proper place to put up this question, if not , 
please correct me.

    I was trying to run bluez on our board with bc4 chip. This chip need to 
set pskey before it can run

    I use hciattach and hciconfig to bring up the hci0 interface.

    Then I try hcitool hci0 scan with my earphone open.

    Nothing happend.

    while, if I using CSR's bchs a2dp demo , it's ok, I can play music. say 
hardware is ok.

    My question is :

    1. To enable bluez with csr chip, is there anything need to do vs the 
standard kernel and bluez package ? Some config need?

    2. Did I need to place the bootrap init sequence for the bc4 chip in 
some place if I using bluez ? say in kernel or in the bluez user space 
scripts? Or , the standard kernel and bluez utility already hand it, But I 
just do the wrong way ?


Many thanks.
Raymond




-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users