Re: [Bluez-users] How to use Bluez with CSR chip ?

[attaboyu@163.com]

[-- Attachment #1.1: Type: text/plain, Size: 4486 bytes --]

   hi raymond
the csr bc4 need to be configured before real running, some pskey should be set and warmreset should be issued. 
1. add --enable-bccmd feature while configure the bluez-utils
2. use bccmd after hci0 is up:
    $bccmd -t hci psload -r /csr.psr
     here csr.psr is the pskey config file, -r means warmreset after pskey configured,there is a example psr file in bluez-utils/tools/example

after that, u can see the other device through hcitool scan

attaboyu

 在2008-06-11，colorant <colorant@163.com> 写道：
>Hi henry
>
>    Thanks for you reply.
>
>    Yes , I am using BC4 A06 Rom version on an arm based embedded board.
>
>    So this one must set pskey before running right ?
>
>    I try to run the CSR's demo first to set the right pskey and run the 
>chip up.
>    After I exit the demo, I can use pc to detect the chip.
>
>    While , then I use :
>
>    hciattach /dev/ttyS1 bcsp 921600
>
>    to attach ttyS1 to hci0
>
>    after that , The PC can not detect the chip anymore.
>
>    and then I try
>    hciconfig hci0 up
>    it can bring up the hci0 interface , but the pc still don't detect the 
>chip.
>
>    for kernel , I only insert bluetooth.ko and hci_uart.ko
>
>    So , can you kindly figure out what might be wrong in my operation ?
>
>    Seems to me the hciattach operation reset the chip. And I might need to 
>modify the hciattach , or ?
>
>Raymond
>
>----- Original Message ----- 
>From: "hong zhang" 
>To: "BlueZ users" 
>Sent: Wednesday, June 11, 2008 8:57 AM
>Subject: Re: [Bluez-users] How to use Bluez with CSR chip ?
>
>
>> Raymond,
>>
>> CSR bc4 is initialized in two ways based on your
>> design. I assum your board is embedded. One is by
>> eeprom and one is using command after build. You need
>> to provide more information.
>>
>> You have to make sure your CSR bc4 chip on your board
>> is up first before using bluez.
>>
>> Regular talking here is based on x86.
>>
>> ---henry
>>
>> --- colorant  wrote:
>>
>>> Hi
>>>
>>>     I am not sure is this the proper place to put up
>>> this question, if not ,
>>> please correct me.
>>>
>>>     I was trying to run bluez on our board with bc4
>>> chip. This chip need to
>>> set pskey before it can run
>>>
>>>     I use hciattach and hciconfig to bring up the
>>> hci0 interface.
>>>
>>>     Then I try hcitool hci0 scan with my earphone
>>> open.
>>>
>>>     Nothing happend.
>>>
>>>     while, if I using CSR's bchs a2dp demo , it's
>>> ok, I can play music. say
>>> hardware is ok.
>>>
>>>     My question is :
>>>
>>>     1. To enable bluez with csr chip, is there
>>> anything need to do vs the
>>> standard kernel and bluez package ? Some config
>>> need?
>>>
>>>     2. Did I need to place the bootrap init sequence
>>> for the bc4 chip in
>>> some place if I using bluez ? say in kernel or in
>>> the bluez user space
>>> scripts? Or , the standard kernel and bluez utility
>>> already hand it, But I
>>> just do the wrong way ?
>>>
>>>
>>> Many thanks.
>>> Raymond
>>>
>>>
>>>
>>>
>>>
>> -------------------------------------------------------------------------
>>> Check out the new SourceForge.net Marketplace.
>>> It's the best place to buy or sell services for
>>> just about anything Open Source.
>>> http://sourceforge.net/services/buy/index.php
>>> _______________________________________________
>>> Bluez-users mailing list
>>> Bluez-users@lists.sourceforge.net
>>>
>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>>
>>
>>
>>
>>
>>
>> -------------------------------------------------------------------------
>> Check out the new SourceForge.net Marketplace.
>> It's the best place to buy or sell services for
>> just about anything Open Source.
>> http://sourceforge.net/services/buy/index.php
>> _______________________________________________
>> Bluez-users mailing list
>> Bluez-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>> 
>
>
>
>
>-------------------------------------------------------------------------
>Check out the new SourceForge.net Marketplace.
>It's the best place to buy or sell services for
>just about anything Open Source.
>http://sourceforge.net/services/buy/index.php
>_______________________________________________
>Bluez-users mailing list
>Bluez-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-users

[-- Attachment #1.2: Type: text/html, Size: 5895 bytes --]

[-- Attachment #2: Type: text/plain, Size: 247 bytes --]

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users