From: "Fritz Code" <codefritz@googlemail.com>
To: "BlueZ users" <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] pairing problems
Date: Wed, 11 Jun 2008 00:27:10 +0200 [thread overview]
Message-ID: <3e9cdced0806101527n7d1489fbme492c29ddf394e0b@mail.gmail.com> (raw)
In-Reply-To: <484EFFCF.90708@earthlink.net>
[-- Attachment #1.1: Type: text/plain, Size: 1290 bytes --]
Right Im using hcidump. This tool prints all hci packets.
However, unfortunately no new for my problem....
On Wed, Jun 11, 2008 at 12:27 AM, Mumia W.. <
paduille.4061.mumia.w+nospam@earthlink.net<paduille.4061.mumia.w%2Bnospam@earthlink.net>>
wrote:
> On 06/10/2008 12:21 PM, hong zhang wrote:
> > --- Martin Kupf <mulata@gmx.de> wrote:
> >> [...]
> >> Hcidump says the following:
> >>
> >> HCI Event: Connect Request (0x04) plen 10
> >> 45 61 00 00 18 00 40 25 00 01
> >> < HCI Command: Accept Connection Request
> >> (0x01|0x0009) plen 7
> >> 45 61 00 00 18 00 01
> >>> HCI Event: Command Status (0x0f) plen 4
> >> 00 01 09 04
>
> > Martin,
> >
> > What do you do to turn on these messages?
> >
> > ---henry
> >
>
> Although I'm not too familiar with the command, Martin mentioned
> "hcidump." Read "man hcidump"
>
>
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
--
Regards,
--Codefritz
[-- Attachment #1.2: Type: text/html, Size: 2134 bytes --]
[-- Attachment #2: Type: text/plain, Size: 247 bytes --]
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2008-06-10 22:27 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-09 16:31 [Bluez-users] pairing problems mulata
2008-06-10 7:42 ` Martin Kupf
2008-06-10 9:32 ` Martin Kupf
2008-06-10 17:21 ` hong zhang
2008-06-10 22:27 ` Mumia W..
2008-06-10 22:27 ` Fritz Code [this message]
2008-06-11 0:48 ` [Bluez-users] How to use Bluez with CSR chip ? colorant
2008-06-11 0:57 ` hong zhang
2008-06-11 2:00 ` colorant
2008-06-11 18:04 ` hong zhang
2008-06-12 0:11 ` colorant
2008-06-12 3:15 ` hong zhang
2008-06-12 2:49 ` attaboyu
2008-06-12 3:14 ` hong zhang
-- strict thread matches above, loose matches on Subject: below --
2008-06-09 9:10 [Bluez-users] pairing problems Fritz Code
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3e9cdced0806101527n7d1489fbme492c29ddf394e0b@mail.gmail.com \
--to=codefritz@googlemail.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox