[Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Sunnan]

Hello, would you please help me?

I'm trying to get an apple wireless mouse working on the apple ibook 
(g4, builtin usb).

I've got the debian bluez packages installed, actually

sudo apt-get install `apt-cache search bluez |cut -f1 -d' '`

(yeah, lazy maybe..)

and I've also got libs2 and utils2 installed from cvs.

Until I ran hid2hci I didn't see anything with hcitool, but hid2hci 
seemed to work fine.

Now running hcitool dev gives me
Devices:
         hci0    00:0D:93:04:19:15

I'm experimenting with running bthid (from bluez cvs utils2).
/var/log/daemon.log has
Feb 13 17:42:20 slowstorm bthid[980]: Bluetooth HID service started

but little else.
Once it got
Feb 13 17:25:20 slowstorm bthid[890]: Bluetooth HID service started
Feb 13 17:26:49 slowstorm bthid[890]: Connected: HID device (ffff:0000)
Feb 13 17:26:49 slowstorm bthid[890]: Connection failed: Connection 
timed out (110)

..but that's all.

I'm also repeatedly grepping ps aux for bthid and it only appears for a 
couple of minutes after starting it, then it's not there (so I usually 
restart it).

I don't see any cursor movement or anything. I don't know so much about 
bluetooth or about computers in general.

For a kernel, I use Linux 2.6.3-rc2-ben1 (on ppc).

lsmod indicates that uinput, hci_usb,rfcomm,l2cap and bluetooth are 
loaded. I've created /dev/input/uinput with mknod as per 
http://www.bueche.ch/comp/mx900/mx900.html

I had the mouse working under Mac OS X before I installed Debian.

What are the other steps I need to take before I can start using the mouse?

Thanks very much in advance, Sunnan


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Marcel Holtmann]

Hi Sunnan,

> I'm trying to get an apple wireless mouse working on the apple ibook 
> (g4, builtin usb).
> 
> I've got the debian bluez packages installed, actually
> 
> sudo apt-get install `apt-cache search bluez |cut -f1 -d' '`
> 
> (yeah, lazy maybe..)
> 
> and I've also got libs2 and utils2 installed from cvs.
> 
> Until I ran hid2hci I didn't see anything with hcitool, but hid2hci 
> seemed to work fine.
> 
> Now running hcitool dev gives me
> Devices:
>          hci0    00:0D:93:04:19:15

what is the output of "hciconfig -a" and the content of
/proc/bus/usb/devices (before and after the run of hid2hci)?

> I'm experimenting with running bthid (from bluez cvs utils2).
> /var/log/daemon.log has
> Feb 13 17:42:20 slowstorm bthid[980]: Bluetooth HID service started
> 
> but little else.
> Once it got
> Feb 13 17:25:20 slowstorm bthid[890]: Bluetooth HID service started
> Feb 13 17:26:49 slowstorm bthid[890]: Connected: HID device (ffff:0000)
> Feb 13 17:26:49 slowstorm bthid[890]: Connection failed: Connection 
> timed out (110)
> 
> ..but that's all.
> 
> I'm also repeatedly grepping ps aux for bthid and it only appears for a 
> couple of minutes after starting it, then it's not there (so I usually 
> restart it).
> 
> I don't see any cursor movement or anything. I don't know so much about 
> bluetooth or about computers in general.

The Apple Bluetooth mouse expects a PIN or a link key even if you only
connect to the SDP service (security mode 3). This is stupid for a HID
mouse, but they did it this way. A working PIN is "0000". So I say you
replace your PIN helper program (from hcid.conf) with the following
executable script

	#!/bin/sh
	echo "PIN:0000"

and put also "0000" into /etc/bluetooth/pin. Restart the hcid and see
how it goes. If this don't work, run "hcidump -w <file>" and send us the
dump file.

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Sunnan]

[-- Attachment #1: Type: text/plain, Size: 2211 bytes --]

Marcel Holtmann wrote:
> what is the output of "hciconfig -a" and the content of
> /proc/bus/usb/devices (before and after the run of hid2hci)?

I don't know how to show how it was before. Now it shows:

slowstorm/home/sunnan% sudo hciconfig -a
hci0:   Type: USB
          BD Address: 00:0D:93:04:19:15  ACL MTU: 192:8  SCO MTU: 64:8
          UP RUNNING PSCAN ISCAN
          RX bytes:6963 acl:399 sco:0 events:198 errors:0
          TX bytes:2109 acl:66 sco:0 commands:62 errors:0
          Features: 0xff 0xff 0x0f 0x00 0x18 0x18 0x00 0x00
          Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
          Link policy: RSWITCH HOLD SNIFF PARK
          Link mode: SLAVE ACCEPT
          Name: 'slowstorm-0'
          Class: 0x000100
          HCI Ver: 1.1 (0x1) HCI Rev: 0x8503  LMP Ver: 1.1 (0x1) LMP
Subver: 0x8503
          Manufacturer: not assigned (2560)


and I've attached the devices.txt that resulted from

cat /proc/bus/usb/devices > devices.txt

(The name 'slowstorm-0' above probably is due to the line
           name "%h-%d";
which I have in my /etc/bluetooth/hcid.conf)

> The Apple Bluetooth mouse expects a PIN or a link key even if you only
> connect to the SDP service (security mode 3). This is stupid for a HID
> mouse, but they did it this way. A working PIN is "0000". So I say you
> replace your PIN helper program (from hcid.conf) with the following
> executable script
> 
> 	#!/bin/sh
> 	echo "PIN:0000"
> 
> and put also "0000" into /etc/bluetooth/pin. Restart the hcid and see
> how it goes. If this don't work, run "hcidump -w <file>" and send us the
> dump file.

One of the more interesting(?) entries in my /var/log/daemon.log after
doing this was:

Feb 13 19:38:29 slowstorm sdpd[25047]: init_server: binding L2CAP
socket: Address already in use

hcidump -w dump.data

printed:
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff

but never quit. I checked dump.data with wc from time to time but it
never appeared to get any largers.

I got childishly impatient after a couple of minutes and hit C-c. I
attached the file anyway. Is it supposed to take very long time? If so,
I could give it another go. Thanks for your patience.

Sunnan

[-- Attachment #2: devices.txt --]
[-- Type: text/plain, Size: 2841 bytes --]


T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.3-rc2-ben1 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0001:01:1b.1
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.3-rc2-ben1 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0001:01:1b.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.3-rc2-ben1 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0001:01:1a.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05ac ProdID=8203 Rev= 9.01
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)


[-- Attachment #3: dump.data --]
[-- Type: application/octet-stream, Size: 612 bytes --]

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Marcel Holtmann]

Hi Sunnan,

> I don't know how to show how it was before. Now it shows:
> 
> slowstorm/home/sunnan% sudo hciconfig -a
> hci0:   Type: USB
>           BD Address: 00:0D:93:04:19:15  ACL MTU: 192:8  SCO MTU: 64:8
>           UP RUNNING PSCAN ISCAN
>           RX bytes:6963 acl:399 sco:0 events:198 errors:0
>           TX bytes:2109 acl:66 sco:0 commands:62 errors:0
>           Features: 0xff 0xff 0x0f 0x00 0x18 0x18 0x00 0x00
>           Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>           Link policy: RSWITCH HOLD SNIFF PARK
>           Link mode: SLAVE ACCEPT
>           Name: 'slowstorm-0'
>           Class: 0x000100
>           HCI Ver: 1.1 (0x1) HCI Rev: 0x8503  LMP Ver: 1.1 (0x1) LMP
> Subver: 0x8503
>           Manufacturer: not assigned (2560)

I don't know what kind of module this is. Please run "hcidump -w <file>"
before running "hciconfig -a" and send us the dump. Maybe we have a big
endian problem here. What bluez-utils version do you have installed?

> One of the more interesting(?) entries in my /var/log/daemon.log after
> doing this was:
> 
> Feb 13 19:38:29 slowstorm sdpd[25047]: init_server: binding L2CAP
> socket: Address already in use

You can't rund sdpd twice, but for HID support this is irrelevant.

> hcidump -w dump.data
> 
> printed:
> HCIDump - HCI packet analyzer ver 1.5
> device: hci0 snap_len: 1028 filter: 0xffffffff
> 
> but never quit. I checked dump.data with wc from time to time but it
> never appeared to get any largers.
> 
> I got childishly impatient after a couple of minutes and hit C-c. I
> attached the file anyway. Is it supposed to take very long time? If so,
> I could give it another go. Thanks for your patience.

This is correct, because you have to terminate it with CTRL-C.

> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=05ac ProdID=8203 Rev= 9.01
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

Reboot your machine and show me this file before you run hid2hci.

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Sunnan]

[-- Attachment #1: Type: text/plain, Size: 1418 bytes --]

Hi again,
after rebooting and loading my modules (and starting hcid, sdpd and 
rfcomm, the latter probably unnecessary but I'm erring on the side of 
caution?), I run:
sudo hcidump -w dumpdata

but just get:

HCIDump - HCI packet analyzer ver 1.5
Can't attach to device hci0. No such device(19)

and it exits without writing anything to the file.

and "hciconfig -a" exits silently.

then I run hid2hci anyway, it prints:
Switching device 05ac:1000 to HCI mode was successful

and then I can do hcidump -w dumpdata
which gives me to stdout:
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff

I had wait a while before it wrote anything to the file.
Then I waited a bit more, and it wrote a bit more. This is normal.
I've attached the file.

 > I don't know what kind of module this is. Please run "hcidump -w <file>"
 > before running "hciconfig -a" and send us the dump. Maybe we have a big
 > endian problem here. What bluez-utils version do you have installed?


2.4-6 from Debian sid, as well as utils2 from bluez cvs. hciconfig comes 
from that cvs checkout (though I have two version in my path, the cvs 
version takes precedence, while hcidump comes out of Edds bluez-hcidump 
package, version 1.5-2 for debian sid.


> Reboot your machine and show me this file before you run hid2hci.

I'm sorry, but it wasn't possible since hcidump wouldn't write one, as 
described above.

[-- Attachment #2: dumpdata --]
[-- Type: application/octet-stream, Size: 612 bytes --]

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Marcel Holtmann]

Hi Sunnan,

> 2.4-6 from Debian sid, as well as utils2 from bluez cvs. hciconfig comes 
> from that cvs checkout (though I have two version in my path, the cvs 
> version takes precedence, while hcidump comes out of Edds bluez-hcidump 
> package, version 1.5-2 for debian sid.

the version of utils2 have a big endian problem, which I have now fixed
in CVS. Try your version from bluez-utils-2.4. Better you call it with
the full path "/sbin/hciconfig -a".

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Sunnan]

Marcel Holtmann wrote:
> the version of utils2 have a big endian problem, which I have now fixed
> in CVS.

Lucky! I always become happy when I find a bug.

> Try your version from bluez-utils-2.4. Better you call it with
> the full path "/sbin/hciconfig -a".


slowstorm/home/sunnan/.dl/mouseemu% sudo /sbin/hciconfig -a
hci0:   Type: USB
         BD Address: 00:0D:93:04:19:15 ACL MTU: 192:8  SCO MTU: 64:8
         UP RUNNING PSCAN ISCAN
         RX bytes:593 acl:2 sco:0 events:40 errors:0
         TX bytes:670 acl:2 sco:0 commands:28 errors:0
         Features: 0xff 0xff 0x0f 0x00 0x18 0x18 0x00 0x00
         Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
         Link policy: RSWITCH HOLD SNIFF PARK
         Link mode: SLAVE ACCEPT
         Name: 'slowstorm-0'
         Class: 0x000100
         Service Classes: Unspecified
         Device Class: Computer, Uncategorized
         HCI Ver: 1.1 (0x1) HCI Rev: 0x385 LMP Ver: 1.1 (0x1) LMP 
Subver: 0x385
         Manufacturer: Cambridge Silicon Radio (10)



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Ramon A Reveron]

[-- Attachment #1: Type: text/plain, Size: 1575 bytes --]

Hi Marcel,

I think this wasn't for me. Mine is a different question...

Thanks...

Regards,
Ramon A. Reveron
IBM Retail Store Solutions
Software Engineer
______________________________________
Phone - (919) 301-5346
Lotus Notes - Ramon A Reveron/Raleigh/IBM
Internet Email- ramon@us.ibm.com
______________________________________




Marcel Holtmann <marcel@holtmann.org>
Sent by: bluez-users-admin@lists.sourceforge.net
02/13/2004 04:50 PM
 
        To:     Sunnan <sunnan@handgranat.org>
        cc:     BlueZ Mailing List <bluez-users@lists.sourceforge.net>
        Subject:        Re: [Bluez-users] apple wireless mouse on apple 
ibook (g4, builtin      usb)


Hi Sunnan,

> 2.4-6 from Debian sid, as well as utils2 from bluez cvs. hciconfig comes 

> from that cvs checkout (though I have two version in my path, the cvs 
> version takes precedence, while hcidump comes out of Edds bluez-hcidump 
> package, version 1.5-2 for debian sid.

the version of utils2 have a big endian problem, which I have now fixed
in CVS. Try your version from bluez-utils-2.4. Better you call it with
the full path "/sbin/hciconfig -a".

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users


[-- Attachment #2: Type: text/html, Size: 2558 bytes --]

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Marcel Holtmann]

Hi Ramon,

> I think this wasn't for me. Mine is a different question...

it was for the mailing list ;)

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Marcel Holtmann]

Hi Sunnan,

> slowstorm/home/sunnan/.dl/mouseemu% sudo /sbin/hciconfig -a
> hci0:   Type: USB
>          BD Address: 00:0D:93:04:19:15 ACL MTU: 192:8  SCO MTU: 64:8
>          UP RUNNING PSCAN ISCAN
>          RX bytes:593 acl:2 sco:0 events:40 errors:0
>          TX bytes:670 acl:2 sco:0 commands:28 errors:0
>          Features: 0xff 0xff 0x0f 0x00 0x18 0x18 0x00 0x00
>          Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>          Link policy: RSWITCH HOLD SNIFF PARK
>          Link mode: SLAVE ACCEPT
>          Name: 'slowstorm-0'
>          Class: 0x000100
>          Service Classes: Unspecified
>          Device Class: Computer, Uncategorized
>          HCI Ver: 1.1 (0x1) HCI Rev: 0x385 LMP Ver: 1.1 (0x1) LMP 
> Subver: 0x385
>          Manufacturer: Cambridge Silicon Radio (10)

this looks much better now. Your laptop contains a CSR chip with the
Bluetooth 1.2 AFH feature. Very nice.

Do you got your mouse working?

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Sunnan]

Hello again,
Marcel Holtmann wrote:
> Do you got your mouse working?

No, not at all. bthid keeps turning itself off (silently disappearing 
from "ps aux|grep bthid" after a while) and I'm not sure how to see if 
or how the mouse connects to the computer. is the dev from hcitool dev 
my bluetooth chip or the mouse? where will the mouse show up, under 
/dev/input/mice or what? I don't really get this basic stuff yet.

I read and followed
  http://www.bueche.ch/comp/mx900/mx900.html
and also read most of
  http://www.holtmann.org/linux/bluetooth/hid.html
but I don't really know how to interpret it.
Sunnan


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

one more thing (was Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb))

[Sunnan]

I need to add that hcitool inq gives me nothing:


slowstorm/home/sunnan% hcitool inq
Inquiring ...
slowstorm/home/sunnan% hcitool dev
Devices:
         hci0    00:0D:93:04:19:15
slowstorm/home/sunnan% hcitool info 00:0D:93:04:19:15
Device is not available or not connected.
slowstorm/home/sunnan% sudo hcitool info 00:0D:93:04:19:15
Device is not available or not connected.


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Marcel Holtmann]

Hi Sunnan,

> No, not at all. bthid keeps turning itself off (silently disappearing 
> from "ps aux|grep bthid" after a while) and I'm not sure how to see if 
> or how the mouse connects to the computer. is the dev from hcitool dev 
> my bluetooth chip or the mouse? where will the mouse show up, under 
> /dev/input/mice or what? I don't really get this basic stuff yet.

the "hcitool dev" shows your local device. The syslog will show your
mouse if it is connected. Take a look at the latest posts on the mailing
list about an Apple keyboard. I think it is the same PIN problem.

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: one more thing (was Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb))

[Marcel Holtmann]

Hi Sunnan,

> slowstorm/home/sunnan% hcitool inq
> Inquiring ...

make sure your mouse is visible.

> slowstorm/home/sunnan% hcitool dev
> Devices:
>          hci0    00:0D:93:04:19:15
> slowstorm/home/sunnan% hcitool info 00:0D:93:04:19:15
> Device is not available or not connected.

This can't work, because you try to connect to your local device ;)

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Marcel Holtmann]

Hi Sunnan,

> slowstorm/home/sunnan% grep pin /etc/bluetooth/hcid.conf
>          pin_helper /usr/local/bin/pin-helper.sh;
> 
> slowstorm/home/sunnan% cat /usr/local/bin/pin-helper.sh
> #!/bin/sh
> echo "PIN:0000"
> slowstorm/home/sunnan% cat /etc/bluetooth/pin
> 0000

is the script executable? Do you restarted hcid?

> could it be that the mouse has been used under OS X? The weird OS X ui 
> blathered something about "pairing" and so on. I haven't used it for a 
> few months so I don't really remember how it was.

Could be, but in general it would pair again in this case.

> I do keep my mouse close at hand, and I've tried turning it on and off 
> and clicking and moving. I don't see what is supposed to happen.

We really need a full binary hcidump to see what is going on.

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Sunnan]

[-- Attachment #1: Type: text/plain, Size: 1493 bytes --]

Marcel Holtmann wrote:
> is the script executable? Do you restarted hcid?

slowstorm/home/sunnan% pin-helper.sh
PIN:0000
slowstorm/home/sunnan% ps aux|grep hcid
root      1668  0.0  0.2  1708  628 ?        S    Feb13   0:00 hcid: 
processing events
root      3763  0.0  0.1  1724  456 pts/3    S    11:51   0:00 hcidump 
-w thirddata
sunnan    3957  0.0  0.2  1656  528 pts/5    R    11:57   0:00 grep hcid
slowstorm/home/sunnan%

And yeah, I've restarted it, both from the /etc/init.d/ scripts and also 
rebooted.

> We really need a full binary hcidump to see what is going on.

I've sent several to the list but I'm unsure of how large they are 
supposed to get before I C-c. I'm attaching one larger now (still only 4 
k... they just don't get very large.). (Are my attachment's getting 
through? Maybe they are stripped somewhere.)

There's been some progress since the last mail. I've run "hcitool scan" 
a couple of times, and _one_ of the times it showed:
slowstorm/home/sunnan% hcitool scan
Scanning ...
         00:0A:95:01:5F:57       sunnan???s mouse

Argh! Why did I give it a name with an apostrophe! Oh, Mac OS, thou 
tempted me to many strange filenames, some even including spaces!
(Note the hexadecimal device number is different from my local device, 
which is 00:0D:93:04:19:15.)

All the other times it just exited after writing "Scanning ...". I've 
been unable to find it again.

As usual, bthid is just quitting after a while without saying so in 
/var/log/daemon.log.

[-- Attachment #2: thirddata --]
[-- Type: application/octet-stream, Size: 2447 bytes --]

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Sunnan]

Hello again,
I still haven't gotten my mouse to work (I know! sorry).
One of the herrings I'm chasing is the name, is the problem the weird
characters in the devices name? if so, can it be renamed?

Or is this completely silly of me and there's something altogether
different that's wrong?

I've been able to find it more often with hcitool by clicking/moving it
while hcitool is searching.

Still no success with bthid, it has never given me anything else than

Feb 15 23:30:04 slowstorm bthid[1035]: Bluetooth HID service started
Feb 15 23:30:30 slowstorm bthid[1035]: Connection failed: Host is down (112)

when I try to connect to my mouse with sudo bthid -c 00:0A:95:01:5F:57

and bthid loves to just exit all the time.



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Marcel Holtmann]

Hi Sunnan,

> I still haven't gotten my mouse to work (I know! sorry).
> One of the herrings I'm chasing is the name, is the problem the weird
> characters in the devices name? if so, can it be renamed?

this must be some Apple specific option. I like to know how it can be
done, but it has nothing to do with your device working or not.

> I've been able to find it more often with hcitool by clicking/moving it
> while hcitool is searching.
> 
> Still no success with bthid, it has never given me anything else than
> 
> Feb 15 23:30:04 slowstorm bthid[1035]: Bluetooth HID service started
> Feb 15 23:30:30 slowstorm bthid[1035]: Connection failed: Host is down (112)
> 
> when I try to connect to my mouse with sudo bthid -c 00:0A:95:01:5F:57
> 
> and bthid loves to just exit all the time.

I think this is an endian problem. From the last dump you send me I saw

< ACL data: handle 0x002d flags 0x02 dlen 24
    L2CAP(d): cid 0x42 len 20 [psm 1]
        SDP SSA Req: tid 0x1 len 0xf
          pat uuid-16 0x0012
          max 0xffff
          aid(s) 0xffff - 0x0000
          cont 00 
> ACL data: handle 0x002d flags 0x02 dlen 15
    L2CAP(d): cid 0x42 len 11 [psm 1]
        SDP SSA Rsp: tid 0x1 len 0x6
          cnt 0x3 len 0x3 frm->len 0x1 n 0x0
          cont 00 

The UUID of the HID service and the attribute id's of the request are
wrong. If it can't find the SDP record for the HID service, it can't
setup the HID descriptor and make your mouse working, but I don't know
why the bthid process exits.

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users