[Bluez-users] IBM Bluetooth PC Card II

[Bluez-users] IBM Bluetooth PC Card II

[Markus Uhr]

Hello

In http://www.holtmann.org/linux/bluetooth/devices.html the
IBM Bluetooth PC Card II is reported to work with the hci_uart
driver. However, when I insert to card into my computer I get these
Log-Messages:

Jan  1 14:06:08 [cardmgr] socket 0: IBM Bluetooth PC Card II
Jan  1 14:06:08 [cardmgr] executing: 'modprobe serial_cs'
Jan  1 14:06:08 [cardmgr] get dev info on socket 0 failed: No such
device
Jan  1 14:06:08 [kernel] serial_cs: no usable port range found, giving
up
Jan  1 14:06:08 [kernel] serial_cs: RequestIO: No more items

So, has anybody an idea what could be wrong that the PCMCIA subsystem
doesn't initialize the card properly? Do I need to pass some special
parameters?

My config entry in /etc/pcmcia/bluetooth.conf for the card:

card "IBM Bluetooth PC Card II"
  version "IBM", "Bluetooth PC Card II", "", ""
  bind "serial_cs" class "bluetooth"

Is anything wrong with that?

Markus Uhr



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] IBM Bluetooth PC Card II

[Marcel Holtmann]

Hi Markus,

> In http://www.holtmann.org/linux/bluetooth/devices.html the
> IBM Bluetooth PC Card II is reported to work with the hci_uart
> driver. However, when I insert to card into my computer I get these
> Log-Messages:
> 
> Jan  1 14:06:08 [cardmgr] socket 0: IBM Bluetooth PC Card II
> Jan  1 14:06:08 [cardmgr] executing: 'modprobe serial_cs'
> Jan  1 14:06:08 [cardmgr] get dev info on socket 0 failed: No such
> device
> Jan  1 14:06:08 [kernel] serial_cs: no usable port range found, giving
> up
> Jan  1 14:06:08 [kernel] serial_cs: RequestIO: No more items
> 
> So, has anybody an idea what could be wrong that the PCMCIA subsystem
> doesn't initialize the card properly? Do I need to pass some special
> parameters?
> 
> My config entry in /etc/pcmcia/bluetooth.conf for the card:
> 
> card "IBM Bluetooth PC Card II"
>   version "IBM", "Bluetooth PC Card II", "", ""
>   bind "serial_cs" class "bluetooth"
> 
> Is anything wrong with that?

what kernel version is this?

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users