Linux bluetooth development
 help / color / mirror / Atom feed
From: Mat Martineau <mathewm@codeaurora.org>
To: linux-bluetooth@vger.kernel.org
Cc: padovan@profusion.mobi, pkrystad@codeaurora.org,
	andrei.emeltchenko@intel.com,
	Mat Martineau <mathewm@codeaurora.org>
Subject: [PATCHv2 4/9] Bluetooth: Add AMP-related data and structures for channel signals
Date: Wed, 19 Oct 2011 10:44:02 -0700	[thread overview]
Message-ID: <1319046247-3391-5-git-send-email-mathewm@codeaurora.org> (raw)
In-Reply-To: <1319046247-3391-1-git-send-email-mathewm@codeaurora.org>

AMP channel creation and channel moves are coordinated using the L2CAP
signaling channel.  These definitions cover the "create channel",
"move channel", and "move channel confirm" signals.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
 include/net/bluetooth/l2cap.h |   54 +++++++++++++++++++++++++++++++++++++++-
 1 files changed, 52 insertions(+), 2 deletions(-)

diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index b0c9345..4f4f318 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -94,6 +94,12 @@ struct l2cap_conninfo {
 #define L2CAP_ECHO_RSP		0x09
 #define L2CAP_INFO_REQ		0x0a
 #define L2CAP_INFO_RSP		0x0b
+#define L2CAP_CREATE_CHAN_REQ	0x0c
+#define L2CAP_CREATE_CHAN_RSP	0x0d
+#define L2CAP_MOVE_CHAN_REQ	0x0e
+#define L2CAP_MOVE_CHAN_RSP	0x0f
+#define L2CAP_MOVE_CHAN_CFM	0x10
+#define L2CAP_MOVE_CHAN_CFM_RSP	0x11
 #define L2CAP_CONN_PARAM_UPDATE_REQ	0x12
 #define L2CAP_CONN_PARAM_UPDATE_RSP	0x13
 
@@ -217,14 +223,15 @@ struct l2cap_conn_rsp {
 #define L2CAP_CID_DYN_START	0x0040
 #define L2CAP_CID_DYN_END	0xffff
 
-/* connect result */
+/* connect/create channel results */
 #define L2CAP_CR_SUCCESS	0x0000
 #define L2CAP_CR_PEND		0x0001
 #define L2CAP_CR_BAD_PSM	0x0002
 #define L2CAP_CR_SEC_BLOCK	0x0003
 #define L2CAP_CR_NO_MEM		0x0004
+#define L2CAP_CR_BAD_AMP	0x0005
 
-/* connect status */
+/* connect/create channel status */
 #define L2CAP_CS_NO_INFO	0x0000
 #define L2CAP_CS_AUTHEN_PEND	0x0001
 #define L2CAP_CS_AUTHOR_PEND	0x0002
@@ -318,6 +325,49 @@ struct l2cap_info_rsp {
 	__u8        data[0];
 } __packed;
 
+struct l2cap_create_chan_req {
+	__le16      psm;
+	__le16      scid;
+	__u8        amp_id;
+} __packed;
+
+struct l2cap_create_chan_rsp {
+	__le16      dcid;
+	__le16      scid;
+	__le16      result;
+	__le16      status;
+} __packed;
+
+struct l2cap_move_chan_req {
+	__le16      icid;
+	__u8        dest_amp_id;
+} __packed;
+
+struct l2cap_move_chan_rsp {
+	__le16      icid;
+	__le16      result;
+} __packed;
+
+#define L2CAP_MR_SUCCESS	0x0000
+#define L2CAP_MR_PEND		0x0001
+#define L2CAP_MR_BAD_ID		0x0002
+#define L2CAP_MR_SAME_ID	0x0003
+#define L2CAP_MR_NOT_SUPP	0x0004
+#define L2CAP_MR_COLLISION	0x0005
+#define L2CAP_MR_NOT_ALLOWED	0x0006
+
+struct l2cap_move_chan_cfm {
+	__le16      icid;
+	__le16      result;
+} __packed;
+
+#define L2CAP_MC_CONFIRMED	0x0000
+#define L2CAP_MC_UNCONFIRMED	0x0001
+
+struct l2cap_move_chan_cfm_rsp {
+	__le16      icid;
+} __packed;
+
 /* info type */
 #define L2CAP_IT_CL_MTU		0x0001
 #define L2CAP_IT_FEAT_MASK	0x0002
-- 
1.7.7

--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum


  parent reply	other threads:[~2011-10-19 17:44 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-19 17:43 [PATCHv2 0/9] AMP interface and signal framework Mat Martineau
2011-10-19 17:43 ` [PATCHv2 1/9] Bluetooth: Add BT_CHANNEL_POLICY socket option Mat Martineau
2011-10-19 18:55   ` Marcel Holtmann
2011-10-19 17:44 ` [PATCHv2 2/9] Bluetooth: Change scope of the enable_hs module parameter Mat Martineau
2011-10-19 19:18   ` Marcel Holtmann
2011-10-19 17:44 ` [PATCHv2 3/9] Bluetooth: Add channel policy to getsockopt/setsockopt Mat Martineau
2011-10-19 18:54   ` Marcel Holtmann
2011-10-19 20:39     ` Mat Martineau
2011-10-19 17:44 ` Mat Martineau [this message]
2011-10-19 18:58   ` [PATCHv2 4/9] Bluetooth: Add AMP-related data and structures for channel signals Marcel Holtmann
2011-10-19 17:44 ` [PATCHv2 5/9] Bluetooth: Add signal handlers for channel creation Mat Martineau
2011-10-19 19:02   ` Marcel Holtmann
2011-10-19 20:53     ` Mat Martineau
2011-10-19 17:44 ` [PATCHv2 6/9] Bluetooth: Add definitions for L2CAP fixed channels Mat Martineau
2011-10-19 19:03   ` Marcel Holtmann
2011-10-19 21:25     ` Mat Martineau
2011-10-19 22:02       ` Marcel Holtmann
2011-10-19 17:44 ` [PATCHv2 7/9] Bluetooth: Use symbolic values for the fixed channel map Mat Martineau
2011-10-19 19:09   ` Marcel Holtmann
2011-10-19 21:44     ` Mat Martineau
2011-10-19 22:05       ` Marcel Holtmann
2011-10-19 17:44 ` [PATCHv2 8/9] Bluetooth: Add signal handlers for channel moves Mat Martineau
2011-10-19 19:11   ` Marcel Holtmann
2011-10-19 17:44 ` [PATCHv2 9/9] Bluetooth: Guarantee BR-EDR device will be registered as hci0 Mat Martineau
2011-10-19 19:17   ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1319046247-3391-5-git-send-email-mathewm@codeaurora.org \
    --to=mathewm@codeaurora.org \
    --cc=andrei.emeltchenko@intel.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=padovan@profusion.mobi \
    --cc=pkrystad@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox