Re: [Bluez-users] Key step in bluetonium setup, bcm203x does not load firmware

[gonzalo briceno <gonzalohbriceno@yahoo.com>]

[-- Attachment #1: Type: text/plain, Size: 1172 bytes --]

Luiz,
 
You are completely right.  I followed your instructions and my Broadcom Bluetonium (bcm203x module) based chip is working.  I hope I did not gloss over any section of information although I am almost positive that I did not.  Anyways, any one having this problem has to simply download bluez-firmware and copy the broadcom files onto /usr/lib/hotplug/firmware.  
Thank you so much.

Luiz Fernando Capitulino <lcapitulino@conectiva.com.br> wrote:

Hello Gonzalo,

gonzalo briceno wrote:

> I installed bluez-firmware-1.0 and bluez-utils-2.9,
> however, the problem is not fixed. When I look at
> /proc/bus/usb/devices the bluetonium chip is listed
> but sure enough, it does not load the usb_hci module.
>
> Any help?

We had the some problem here (but the device is different).

On our setup, we copied the firmware files to:

/usr/lib/hotplug/firmware/

and reloaded the kernel module.

I'm not certain if it is the right thing to do, but
it worked.

Hope it helps,

-- 
Luiz Fernando N. Capitulino


--
Gonzalo Briceno
gonzalohbriceno@yahoo.com
267.679.1289
		
---------------------------------
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.

[-- Attachment #2: Type: text/html, Size: 1603 bytes --]