* [PATCH v2] Cycling Speed and Cadence profile (CSCP) API
2012-09-25 15:07 [RFC v2] Cycling Speed and Cadence profile (CSCP) API Andrzej Kaczmarek
@ 2012-09-25 15:07 ` Andrzej Kaczmarek
2012-09-28 13:26 ` Johan Hedberg
0 siblings, 1 reply; 3+ messages in thread
From: Andrzej Kaczmarek @ 2012-09-25 15:07 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Andrzej Kaczmarek
---
doc/cycling-api.txt | 117 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 117 insertions(+)
create mode 100644 doc/cycling-api.txt
diff --git a/doc/cycling-api.txt b/doc/cycling-api.txt
new file mode 100644
index 0000000..6186fe1
--- /dev/null
+++ b/doc/cycling-api.txt
@@ -0,0 +1,117 @@
+Cycling Speed and Cadence API description
+****************************************
+
+Copyright (C) 2012 Tieto Poland
+
+Cycling Speed and Cadence Manager hierarchy
+============================
+
+Service org.bluez
+Interface org.bluez.CyclingSpeedManager
+Object path [variable prefix]/{hci0,hci1,...}
+
+Methods RegisterWatcher(object agent)
+
+ Registers a watcher to monitor cycling speed and cadence
+ measurements.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+
+ UnregisterWatcher(object agent)
+
+ Unregisters a watcher.
+
+Cycling Speed and Cadence Profile hierarchy
+============================
+
+Service org.bluez
+Interface org.bluez.CyclingSpeed
+Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
+
+Methods void SetProperty(string name, variant value)
+
+ Changes the value of the specified property. Only
+ read-write properties can be changed. On success
+ this will emit a PropertyChanged signal.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+
+ dict GetProperties()
+
+ Returns all properties for the interface. See the
+ Properties section for the available properties.
+
+ SetCumulativeWheelRevolutions(uint32 value)
+
+ Sets cumulative wheel revolutions value if
+ Cumulative Wheel Revolutions feature is supported.
+
+ Possible Errors: org.bluez.Error.NotSupported
+
+Signals PropertyChanged(string name, variant value)
+
+ This signal indicates a changed value of the given
+ property.
+
+Properties string Location (optional) [readwrite]
+
+ Current sensor location, if supported.
+ If Multiple Sensor Locations feature is supported,
+ this property can be set to one of values read from
+ SupportedLocations property.
+
+ Possible values: "Other", "Top of shoe", "In shoe",
+ "Hip", "Front Wheel", "Left Crank",
+ "Right Crank", "Left Pedal",
+ "Right Pedal", "Front Hub",
+ "Rear Dropout", "Chainstay",
+ "Rear Wheel", "Rear Hub"
+
+ array{string} SupportedLocations (optional) [readonly]
+
+ List of locations supported by sensor, only present
+ if Multiple Sensor Locations feature is supported.
+
+ boolean WheelRevolutionDataSupported [readonly]
+
+ true if sensor can read and set Cumulative Wheel
+ Revolutions value, false otherwise.
+
+ boolean MultipleSensorLocationsSupported [readonly]
+
+ true if sensor supports Multiple Sensor Locations
+ feature and can set Location, false otherwise.
+
+Cycling Speed and Cadence Watcher hierarchy
+============================
+Service unique name
+Interface org.bluez.CyclingSpeedWatcher
+Object path freely definable
+
+Methods void MeasurementReceived(object device, dict measurement)
+
+ This callback is called whenever wheel and/or crank
+ revolutions measurement is received from sensor.
+
+ Measurement:
+
+ uint32 WheelRevolutions (optional):
+
+ Cumulative number of wheel revolutions.
+
+ uint16 LastWheelEventTime (optional):
+
+ Time of last event from wheel sensor.
+ Value is expressed in 1/1024 second
+ units and can roll over during a ride.
+
+ uint16 CrankRevolutions (optional):
+
+ Cumulative number of crank revolutions.
+ This value can occasionally roll over.
+
+ uint16 LastCrankEventTime (optional):
+
+ Time of last event from crank sensor.
+ Value is expressed in 1/1024 second
+ units and can roll over during a ride.
--
1.7.11.3
^ permalink raw reply related [flat|nested] 3+ messages in thread