From: Andrei Emeltchenko <andrei.emeltchenko.news@gmail.com>
To: Mat Martineau <mathewm@codeaurora.org>
Cc: linux-bluetooth@vger.kernel.org, gustavo@padovan.org,
sunnyk@codeaurora.org, marcel@holtmann.org
Subject: Re: [PATCHv3 05/18] Bluetooth: Channel move request handling
Date: Fri, 19 Oct 2012 11:00:28 +0300 [thread overview]
Message-ID: <20121019080021.GD4249@aemeltch-MOBL1> (raw)
In-Reply-To: <1350583130-3241-6-git-send-email-mathewm@codeaurora.org>
Hi Mat,
On Thu, Oct 18, 2012 at 10:58:37AM -0700, Mat Martineau wrote:
> On receipt of a channel move request, the request must be validated
> based on the L2CAP mode, connection state, and controller
> capabilities. ERTM channels must have their state machines cleared
> and transmission paused while the channel move takes place.
>
> If the channel is being moved to an AMP controller then
> an AMP physical link must be prepared. Moving the channel back to
> BR/EDR proceeds immediately.
>
> Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
> Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
> ---
> net/bluetooth/l2cap_core.c | 108 ++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 107 insertions(+), 1 deletion(-)
>
> diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
> index e826420..42e20ee 100644
> --- a/net/bluetooth/l2cap_core.c
> +++ b/net/bluetooth/l2cap_core.c
> @@ -734,6 +734,12 @@ static void l2cap_send_cmd(struct l2cap_conn *conn, u8 ident, u8 code, u16 len,
> hci_send_acl(conn->hchan, skb, flags);
> }
>
> +static bool __chan_is_moving(struct l2cap_chan *chan)
> +{
> + return chan->move_state != L2CAP_MOVE_STABLE &&
> + chan->move_state != L2CAP_MOVE_WAIT_PREPARE;
> +}
> +
> static void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb)
> {
> struct hci_conn *hcon = chan->conn->hcon;
> @@ -995,6 +1001,41 @@ void l2cap_send_conn_req(struct l2cap_chan *chan)
> l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_REQ, sizeof(req), &req);
> }
>
> +static void l2cap_move_setup(struct l2cap_chan *chan)
> +{
> + struct sk_buff *skb;
> +
> + BT_DBG("chan %p", chan);
> +
> + if (chan->mode != L2CAP_MODE_ERTM)
> + return;
> +
> + __clear_retrans_timer(chan);
> + __clear_monitor_timer(chan);
> + __clear_ack_timer(chan);
> +
> + chan->retry_count = 0;
> + skb_queue_walk(&chan->tx_q, skb) {
> + if (bt_cb(skb)->control.retries)
> + bt_cb(skb)->control.retries = 1;
> + else
> + break;
> + }
> +
> + chan->expected_tx_seq = chan->buffer_seq;
> +
> + clear_bit(CONN_REJ_ACT, &chan->conn_state);
> + clear_bit(CONN_SREJ_ACT, &chan->conn_state);
> + l2cap_seq_list_clear(&chan->retrans_list);
> + l2cap_seq_list_clear(&chan->srej_list);
> + skb_queue_purge(&chan->srej_q);
> +
> + chan->tx_state = L2CAP_TX_STATE_XMIT;
> + chan->rx_state = L2CAP_RX_STATE_MOVE;
> +
> + set_bit(CONN_REMOTE_BUSY, &chan->conn_state);
> +}
> +
> static void l2cap_chan_ready(struct l2cap_chan *chan)
> {
> /* This clears all conf flags, including CONF_NOT_COMPLETE */
> @@ -4155,6 +4196,7 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
> u16 cmd_len, void *data)
> {
> struct l2cap_move_chan_req *req = data;
> + struct l2cap_chan *chan;
> u16 icid = 0;
> u16 result = L2CAP_MR_NOT_ALLOWED;
>
> @@ -4168,9 +4210,73 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
> if (!enable_hs)
> return -EINVAL;
>
> - /* Placeholder: Always refuse */
> + chan = l2cap_get_chan_by_dcid(conn, icid);
> + if (!chan || chan->scid < L2CAP_CID_DYN_START ||
> + chan->chan_policy == BT_CHANNEL_POLICY_BREDR_ONLY ||
> + (chan->mode != L2CAP_MODE_ERTM &&
> + chan->mode != L2CAP_MODE_STREAMING)) {
> + result = L2CAP_MR_NOT_ALLOWED;
> + goto send_move_response;
> + }
> +
> + if (chan->local_amp_id == req->dest_amp_id) {
> + result = L2CAP_MR_SAME_ID;
> + goto send_move_response;
> + }
> +
> + if (req->dest_amp_id) {
> + struct hci_dev *hdev;
> + hdev = hci_dev_get(req->dest_amp_id);
> + if (!hdev || hdev->dev_type != HCI_AMP ||
> + !test_bit(HCI_UP, &hdev->flags)) {
> + if (hdev)
> + hci_dev_put(hdev);
> +
> + result = L2CAP_MR_BAD_ID;
> + goto send_move_response;
> + }
> + hci_dev_put(hdev);
> + }
> +
> + /* Detect a move collision. Only send a collision response
> + * if this side has "lost", otherwise proceed with the move.
> + * The winner has the larger bd_addr.
> + */
> + if ((__chan_is_moving(chan) ||
> + chan->move_role != L2CAP_MOVE_ROLE_NONE) &&
> + bacmp(conn->src, conn->dst) > 0) {
> + result = L2CAP_MR_COLLISION;
> + goto send_move_response;
> + }
> +
> + chan->ident = cmd->ident;
> + chan->move_role = L2CAP_MOVE_ROLE_RESPONDER;
> + l2cap_move_setup(chan);
> + chan->move_id = req->dest_amp_id;
> + icid = chan->dcid;
> +
> + if (!req->dest_amp_id) {
> + /* Moving to BR/EDR */
> + if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
> + chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
> + result = L2CAP_MR_PEND;
> + } else {
> + chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
> + result = L2CAP_MR_SUCCESS;
> + }
> + } else {
> + chan->move_state = L2CAP_MOVE_WAIT_PREPARE;
> + /* Placeholder - uncomment when amp functions are available */
> + /*amp_accept_physical(chan, req->dest_amp_id);*/
> + result = L2CAP_MR_PEND;
> + }
> +
> +send_move_response:
> l2cap_send_move_chan_rsp(conn, cmd->ident, icid, result);
>
> + if (chan)
> + l2cap_chan_unlock(chan);
> +
> return 0;
> }
>
> --
> 1.7.12.3
>
> --
> Mat Martineau
>
> Employee of Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2012-10-19 8:00 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-18 17:58 [PATCHv3 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
2012-10-18 17:58 ` [PATCHv3 01/18] Bluetooth: Add new l2cap_chan struct members for high speed channels Mat Martineau
2012-10-18 17:58 ` [PATCHv3 02/18] Bluetooth: Add L2CAP create channel request handling Mat Martineau
2012-10-18 17:58 ` [PATCHv3 03/18] Bluetooth: Remove unnecessary intermediate function Mat Martineau
2012-10-19 7:56 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 04/18] Bluetooth: Lookup channel structure based on DCID Mat Martineau
2012-10-19 7:57 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 05/18] Bluetooth: Channel move request handling Mat Martineau
2012-10-19 8:00 ` Andrei Emeltchenko [this message]
2012-10-18 17:58 ` [PATCHv3 06/18] Bluetooth: Add new ERTM receive states for channel move Mat Martineau
2012-10-19 8:06 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 07/18] Bluetooth: Add move channel confirm handling Mat Martineau
2012-10-18 21:03 ` Marcel Holtmann
2012-10-19 8:07 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 08/18] Bluetooth: Add state to hci_chan Mat Martineau
2012-10-19 8:08 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 09/18] Bluetooth: Move channel response Mat Martineau
2012-10-18 21:05 ` Marcel Holtmann
2012-10-18 17:58 ` [PATCHv3 10/18] Bluetooth: Add logical link confirm Mat Martineau
2012-10-18 21:08 ` Marcel Holtmann
2012-10-19 21:21 ` Mat Martineau
2012-10-19 7:53 ` Andrei Emeltchenko
2012-10-19 16:44 ` Mat Martineau
2012-10-18 17:58 ` [PATCHv3 11/18] Bluetooth: Add move confirm response handling Mat Martineau
2012-10-19 8:25 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 12/18] Bluetooth: Handle physical link completion Mat Martineau
2012-10-19 8:32 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 13/18] Bluetooth: Flag ACL frames as complete for AMP controllers Mat Martineau
2012-10-19 8:44 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 14/18] Bluetooth: Do not send data during channel move Mat Martineau
2012-10-19 8:45 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 15/18] Bluetooth: Configure appropriate timeouts for AMP controllers Mat Martineau
2012-10-18 17:58 ` [PATCHv3 16/18] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP Mat Martineau
2012-10-18 17:58 ` [PATCHv3 17/18] Bluetooth: Do not retransmit data during a channel move Mat Martineau
2012-10-19 8:48 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 18/18] Bluetooth: Start channel move when socket option is changed Mat Martineau
2012-10-19 9:37 ` Andrei Emeltchenko
2012-10-19 16:16 ` Mat Martineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121019080021.GD4249@aemeltch-MOBL1 \
--to=andrei.emeltchenko.news@gmail.com \
--cc=gustavo@padovan.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mathewm@codeaurora.org \
--cc=sunnyk@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox