From: Andrei Emeltchenko <andrei.emeltchenko.news@gmail.com>
To: Mat Martineau <mathewm@codeaurora.org>
Cc: linux-bluetooth@vger.kernel.org, gustavo@padovan.org,
sunnyk@codeaurora.org, marcel@holtmann.org
Subject: Re: [PATCHv3 06/18] Bluetooth: Add new ERTM receive states for channel move
Date: Fri, 19 Oct 2012 11:06:02 +0300 [thread overview]
Message-ID: <20121019080601.GE4249@aemeltch-MOBL1> (raw)
In-Reply-To: <1350583130-3241-7-git-send-email-mathewm@codeaurora.org>
Hi Mat,
On Thu, Oct 18, 2012 at 10:58:38AM -0700, Mat Martineau wrote:
> Two new states are required to implement channel moves with the ERTM
> receive state machine.
>
> The "WAIT_P" state is used by a move responder to wait for a "poll"
> flag after a move is completed (success or failure). "WAIT_F" is
> similarly used by a move initiator to wait for a "final" flag when the
> move is completing. In either state, the reqseq value in the
> poll/final frame tells the state machine exactly which frame should be
> expected next.
>
> Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
> Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
> ---
> net/bluetooth/l2cap_core.c | 104 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 104 insertions(+)
>
> diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
> index 42e20ee..ff25bf4 100644
> --- a/net/bluetooth/l2cap_core.c
> +++ b/net/bluetooth/l2cap_core.c
> @@ -4706,6 +4706,12 @@ static int l2cap_reassemble_sdu(struct l2cap_chan *chan, struct sk_buff *skb,
> return err;
> }
>
> +static int l2cap_resegment(struct l2cap_chan *chan)
> +{
> + /* Placeholder */
> + return 0;
> +}
> +
> void l2cap_chan_busy(struct l2cap_chan *chan, int busy)
> {
> u8 event;
> @@ -5211,6 +5217,98 @@ static int l2cap_rx_state_srej_sent(struct l2cap_chan *chan,
> return err;
> }
>
> +static int l2cap_finish_move(struct l2cap_chan *chan)
> +{
> + BT_DBG("chan %p", chan);
> +
> + chan->move_role = L2CAP_MOVE_ROLE_NONE;
> + chan->rx_state = L2CAP_RX_STATE_RECV;
> +
> + if (chan->hs_hcon)
> + chan->conn->mtu = chan->hs_hcon->hdev->block_mtu;
> + else
> + chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
> +
> + return l2cap_resegment(chan);
> +}
> +
> +static int l2cap_rx_state_wait_p(struct l2cap_chan *chan,
> + struct l2cap_ctrl *control,
> + struct sk_buff *skb, u8 event)
> +{
> + int err;
> +
> + BT_DBG("chan %p, control %p, skb %p, event %d", chan, control, skb,
> + event);
> +
> + if (!control->poll)
> + return -EPROTO;
> +
> + l2cap_process_reqseq(chan, control->reqseq);
> +
> + if (!skb_queue_empty(&chan->tx_q))
> + chan->tx_send_head = skb_peek(&chan->tx_q);
> + else
> + chan->tx_send_head = NULL;
> +
> + /* Rewind next_tx_seq to the point expected
> + * by the receiver.
> + */
> + chan->next_tx_seq = control->reqseq;
> + chan->unacked_frames = 0;
> +
> + err = l2cap_finish_move(chan);
> + if (err)
> + return err;
> +
> + set_bit(CONN_SEND_FBIT, &chan->conn_state);
> + l2cap_send_i_or_rr_or_rnr(chan);
> +
> + if (event == L2CAP_EV_RECV_IFRAME)
> + return -EPROTO;
> +
> + return l2cap_rx_state_recv(chan, control, NULL, event);
> +}
> +
> +static int l2cap_rx_state_wait_f(struct l2cap_chan *chan,
> + struct l2cap_ctrl *control,
> + struct sk_buff *skb, u8 event)
> +{
> + int err;
> +
> + if (!control->final)
> + return -EPROTO;
> +
> + clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
> + chan->move_role = L2CAP_MOVE_ROLE_NONE;
> +
> + chan->rx_state = L2CAP_RX_STATE_RECV;
> + l2cap_process_reqseq(chan, control->reqseq);
> +
> + if (!skb_queue_empty(&chan->tx_q))
> + chan->tx_send_head = skb_peek(&chan->tx_q);
> + else
> + chan->tx_send_head = NULL;
> +
> + /* Rewind next_tx_seq to the point expected
> + * by the receiver.
> + */
> + chan->next_tx_seq = control->reqseq;
> + chan->unacked_frames = 0;
> +
> + if (chan->hs_hcon)
> + chan->conn->mtu = chan->hs_hcon->hdev->block_mtu;
> + else
> + chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
> +
> + err = l2cap_resegment(chan);
> +
> + if (!err)
> + err = l2cap_rx_state_recv(chan, control, skb, event);
> +
> + return err;
> +}
> +
> static bool __valid_reqseq(struct l2cap_chan *chan, u16 reqseq)
> {
> /* Make sure reqseq is for a packet that has been sent but not acked */
> @@ -5237,6 +5335,12 @@ static int l2cap_rx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
> err = l2cap_rx_state_srej_sent(chan, control, skb,
> event);
> break;
> + case L2CAP_RX_STATE_WAIT_P:
> + err = l2cap_rx_state_wait_p(chan, control, skb, event);
> + break;
> + case L2CAP_RX_STATE_WAIT_F:
> + err = l2cap_rx_state_wait_f(chan, control, skb, event);
> + break;
> default:
> /* shut it down */
> break;
> --
> 1.7.12.3
>
> --
> Mat Martineau
>
> Employee of Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2012-10-19 8:06 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-18 17:58 [PATCHv3 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
2012-10-18 17:58 ` [PATCHv3 01/18] Bluetooth: Add new l2cap_chan struct members for high speed channels Mat Martineau
2012-10-18 17:58 ` [PATCHv3 02/18] Bluetooth: Add L2CAP create channel request handling Mat Martineau
2012-10-18 17:58 ` [PATCHv3 03/18] Bluetooth: Remove unnecessary intermediate function Mat Martineau
2012-10-19 7:56 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 04/18] Bluetooth: Lookup channel structure based on DCID Mat Martineau
2012-10-19 7:57 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 05/18] Bluetooth: Channel move request handling Mat Martineau
2012-10-19 8:00 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 06/18] Bluetooth: Add new ERTM receive states for channel move Mat Martineau
2012-10-19 8:06 ` Andrei Emeltchenko [this message]
2012-10-18 17:58 ` [PATCHv3 07/18] Bluetooth: Add move channel confirm handling Mat Martineau
2012-10-18 21:03 ` Marcel Holtmann
2012-10-19 8:07 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 08/18] Bluetooth: Add state to hci_chan Mat Martineau
2012-10-19 8:08 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 09/18] Bluetooth: Move channel response Mat Martineau
2012-10-18 21:05 ` Marcel Holtmann
2012-10-18 17:58 ` [PATCHv3 10/18] Bluetooth: Add logical link confirm Mat Martineau
2012-10-18 21:08 ` Marcel Holtmann
2012-10-19 21:21 ` Mat Martineau
2012-10-19 7:53 ` Andrei Emeltchenko
2012-10-19 16:44 ` Mat Martineau
2012-10-18 17:58 ` [PATCHv3 11/18] Bluetooth: Add move confirm response handling Mat Martineau
2012-10-19 8:25 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 12/18] Bluetooth: Handle physical link completion Mat Martineau
2012-10-19 8:32 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 13/18] Bluetooth: Flag ACL frames as complete for AMP controllers Mat Martineau
2012-10-19 8:44 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 14/18] Bluetooth: Do not send data during channel move Mat Martineau
2012-10-19 8:45 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 15/18] Bluetooth: Configure appropriate timeouts for AMP controllers Mat Martineau
2012-10-18 17:58 ` [PATCHv3 16/18] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP Mat Martineau
2012-10-18 17:58 ` [PATCHv3 17/18] Bluetooth: Do not retransmit data during a channel move Mat Martineau
2012-10-19 8:48 ` Andrei Emeltchenko
2012-10-18 17:58 ` [PATCHv3 18/18] Bluetooth: Start channel move when socket option is changed Mat Martineau
2012-10-19 9:37 ` Andrei Emeltchenko
2012-10-19 16:16 ` Mat Martineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121019080601.GE4249@aemeltch-MOBL1 \
--to=andrei.emeltchenko.news@gmail.com \
--cc=gustavo@padovan.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mathewm@codeaurora.org \
--cc=sunnyk@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox