* [Bluez-devel] L2CAP: One failing connection hurts others? @ 2004-09-14 15:20 Stefan Mischke 2004-09-14 18:34 ` Marcel Holtmann 0 siblings, 1 reply; 22+ messages in thread From: Stefan Mischke @ 2004-09-14 15:20 UTC (permalink / raw) To: BlueZ Mailing List Hello! I'm observing the following issue: I have 3 BT devices. 2 in listening state, the 3rd is connecting to both of them repeatingly via L2CAP (polling some data). If one of the listening devices is almost of the range and makes connection attempts fail, this also causes the connection attempts to the other device (which is good in range) to fail with errno 16 "Device or ressource busy". The (almost) out of range device fails as expected with errno 110 "Connection timed out" (since I set a timeout) or 112 "Host is down". Now my question: Is there a way to circumvent this errno 16, so that I can further connect to in range devices even if one device is getting out of range and thus producing errors? What makes L2CAP failing with errno 16? How can I prevent it? Regards Stefan P.S.: Funnily enough, 110 and 112 are the telephone numbers for police and fire department in Germany. I wonder if there's any connection. :) ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-14 15:20 [Bluez-devel] L2CAP: One failing connection hurts others? Stefan Mischke @ 2004-09-14 18:34 ` Marcel Holtmann 2004-09-14 19:11 ` Stefan Mischke 0 siblings, 1 reply; 22+ messages in thread From: Marcel Holtmann @ 2004-09-14 18:34 UTC (permalink / raw) To: Stefan Mischke; +Cc: BlueZ Mailing List Hi Stefan, > I'm observing the following issue: I have 3 BT devices. 2 in listening > state, the 3rd is connecting to both of them repeatingly via L2CAP > (polling some data). If one of the listening devices is almost of the > range and makes connection attempts fail, this also causes the > connection attempts to the other device (which is good in range) to fail > with errno 16 "Device or ressource busy". The (almost) out of range > device fails as expected with errno 110 "Connection timed out" (since I > set a timeout) or 112 "Host is down". > > Now my question: Is there a way to circumvent this errno 16, so that I > can further connect to in range devices even if one device is getting > out of range and thus producing errors? What makes L2CAP failing with > errno 16? How can I prevent it? run "hcidump -x" as root and show us the problematic parts. What kind of dongles are you using? Do you changed any of hcid.conf settings or do you set the master/rswitch on the listening L2CAP socket? Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-14 18:34 ` Marcel Holtmann @ 2004-09-14 19:11 ` Stefan Mischke 2004-09-14 19:24 ` Marcel Holtmann 0 siblings, 1 reply; 22+ messages in thread From: Stefan Mischke @ 2004-09-14 19:11 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List Hi Marcel & List! Marcel Holtmann schrieb: >run "hcidump -x" as root and show us the problematic parts. What kind of >dongles are you using? Do you changed any of hcid.conf settings or do >you set the master/rswitch on the listening L2CAP socket? > > I'm using Acer BT600 Class II dongles (CSR chipset I think). 00:02:72:B1:1D:6C is a listening server (master). 00:02:72:B1:1D:62 is also a listening server (master). 00:02:72:B1:59:46 is the connecting client (slave). The client connects to the servers sequentially, so the slave should not be connected to two masters at the same time. But I don't know how fast the ACL link is disconnected after closing the L2CAP socket. This could be a problem. Although my dongles should be able to manage 1 slave connected to 2 masters, I think it's not a good idea. I don't like to switch the master-slave role, since then, the server could not handle more than 2 clients (if at all). Ok, here comes the hcidump. The first few rounds are ok. Then I put my hand around the dongle 00:02:72:B1:1D:62 so the client 00:02:72:B1:59:46 can't connect to it anymore. But the connection attempts to 00:02:72:B1:1D:6C are also affected by that. They fail almost always. Can anyone see why? Regards Stefan HCIDump - HCI packet analyzer ver 1.7 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Role Change(0x12) plen 8 00 6C 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 29 00 6C 1D B1 72 02 00 01 00 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 29 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 6C 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 29 00 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Max Slots Change(0x1b) plen 3 29 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 < HCI Command: Read RSSI(0x05|0x0005) plen 2 29 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 29 00 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 29 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 29 00 FF < ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x0029 flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x0029 flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x0029 flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x0029 flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 29 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 < HCI Command: Create Connection(0x01|0x0005) plen 13 62 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Disconn Complete(0x05) plen 4 00 29 00 16 > HCI Event: Role Change(0x12) plen 8 00 62 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 2D 00 62 1D B1 72 02 00 01 00 < ACL data: handle 0x002d flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 2D 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 62 1D B1 72 02 00 01 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 2D 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 > HCI Event: Max Slots Change(0x1b) plen 3 2D 00 05 > ACL data: handle 0x002d flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x002d flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 > ACL data: handle 0x002d flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x002d flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x002d flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 2D 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 2D 00 FB > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 2D 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 2D 00 FF < ACL data: handle 0x002d flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x002d flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x002d flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x002d flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 > ACL data: handle 0x002d flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > ACL data: handle 0x002d flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x002d flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x002d flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x002d flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x002d flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x002d flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 > ACL data: handle 0x002d flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x002d flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x002d flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x002d flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x002d flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2D 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 2D 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete(0x05) plen 4 00 2D 00 16 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Role Change(0x12) plen 8 00 6C 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 2A 00 6C 1D B1 72 02 00 01 00 < ACL data: handle 0x002a flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 2A 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 6C 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 2A 00 > HCI Event: Max Slots Change(0x1b) plen 3 2A 00 05 > ACL data: handle 0x002a flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x002a flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > ACL data: handle 0x002a flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x002a flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x002a flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 2A 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 2A 00 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 2A 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 2A 00 FF < ACL data: handle 0x002a flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x002a flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x002a flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x002a flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x002a flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > ACL data: handle 0x002a flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x002a flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x002a flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x002a flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x002a flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x002a flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > ACL data: handle 0x002a flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x002a flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x002a flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x002a flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x002a flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 2A 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 < HCI Command: Create Connection(0x01|0x0005) plen 13 62 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Disconn Complete(0x05) plen 4 00 2A 00 16 > HCI Event: Role Change(0x12) plen 8 00 62 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 2F 00 62 1D B1 72 02 00 01 00 < ACL data: handle 0x002f flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 2F 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 62 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 2F 00 > HCI Event: Max Slots Change(0x1b) plen 3 2F 00 05 > ACL data: handle 0x002f flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x002f flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > ACL data: handle 0x002f flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x002f flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x002f flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 2F 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 2F 00 FC < HCI Command: Get Link Quality(0x05|0x0003) plen 2 2F 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 2F 00 FF < ACL data: handle 0x002f flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x002f flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x002f flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x002f flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > ACL data: handle 0x002f flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > ACL data: handle 0x002f flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x002f flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x002f flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x002f flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x002f flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x002f flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > ACL data: handle 0x002f flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x002f flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x002f flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x002f flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x002f flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 2F 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete(0x05) plen 4 00 2F 00 16 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Role Change(0x12) plen 8 00 6C 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 2B 00 6C 1D B1 72 02 00 01 00 < ACL data: handle 0x002b flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 2B 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 6C 1D B1 72 02 00 01 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 2B 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > ACL data: handle 0x002b flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x002b flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Max Slots Change(0x1b) plen 3 2B 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > ACL data: handle 0x002b flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x002b flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x002b flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 2B 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 2B 00 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 2B 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 2B 00 FF < ACL data: handle 0x002b flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x002b flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x002b flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x002b flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > ACL data: handle 0x002b flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 02 00 > ACL data: handle 0x002b flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x002b flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x002b flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x002b flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x002b flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x002b flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > ACL data: handle 0x002b flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x002b flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x002b flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x002b flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x002b flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 2B 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete(0x05) plen 4 00 2B 00 16 < HCI Command: Create Connection(0x01|0x0005) plen 13 62 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Role Change(0x12) plen 8 00 62 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 29 00 62 1D B1 72 02 00 01 00 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 29 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 62 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 29 00 > HCI Event: Max Slots Change(0x1b) plen 3 29 00 05 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 29 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 29 00 FA < HCI Command: Get Link Quality(0x05|0x0003) plen 2 29 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 29 00 FF < ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x0029 flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x0029 flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x0029 flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x0029 flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 29 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete(0x05) plen 4 00 29 00 16 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Role Change(0x12) plen 8 00 6C 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 2A 00 6C 1D B1 72 02 00 01 00 < ACL data: handle 0x002a flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 2A 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 6C 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 2A 00 > HCI Event: Max Slots Change(0x1b) plen 3 2A 00 05 > ACL data: handle 0x002a flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x002a flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > ACL data: handle 0x002a flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x002a flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x002a flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 2A 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 2A 00 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 2A 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 2A 00 FF < ACL data: handle 0x002a flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x002a flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x002a flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x002a flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > ACL data: handle 0x002a flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > ACL data: handle 0x002a flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x002a flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x002a flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x002a flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x002a flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x002a flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > ACL data: handle 0x002a flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x002a flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x002a flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A < ACL data: handle 0x002a flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 > ACL data: handle 0x002a flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x002a flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 > ACL data: handle 0x002a flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2A 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 2A 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 < HCI Command: Create Connection(0x01|0x0005) plen 13 62 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Disconn Complete(0x05) plen 4 00 2A 00 16 > HCI Event: Role Change(0x12) plen 8 00 62 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 30 00 62 1D B1 72 02 00 01 00 < ACL data: handle 0x0030 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 30 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 62 1D B1 72 02 00 01 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 30 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 > HCI Event: Max Slots Change(0x1b) plen 3 30 00 05 > ACL data: handle 0x0030 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x0030 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 > ACL data: handle 0x0030 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x0030 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x0030 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 30 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 30 00 FD < HCI Command: Get Link Quality(0x05|0x0003) plen 2 30 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 30 00 FF < ACL data: handle 0x0030 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 < ACL data: handle 0x0030 flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x0030 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x0030 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 > ACL data: handle 0x0030 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 > ACL data: handle 0x0030 flags 0x02 dlen 17 > ACL data: handle 0x0030 flags 0x01 dlen 17 > ACL data: handle 0x0030 flags 0x01 dlen 17 > ACL data: handle 0x0030 flags 0x01 dlen 17 > ACL data: handle 0x0030 flags 0x01 dlen 13 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x0030 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x0030 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x0030 flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x0030 flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x0030 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 > ACL data: handle 0x0030 flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x0030 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x0030 flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x0030 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x0030 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 30 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 30 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete(0x05) plen 4 00 30 00 16 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Role Change(0x12) plen 8 00 6C 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 2C 00 6C 1D B1 72 02 00 01 00 < ACL data: handle 0x002c flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 2C 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 6C 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 2C 00 > HCI Event: Max Slots Change(0x1b) plen 3 2C 00 05 > ACL data: handle 0x002c flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x002c flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 > ACL data: handle 0x002c flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x002c flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x002c flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 2C 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 2C 00 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 2C 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 2C 00 FF < ACL data: handle 0x002c flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x002c flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x002c flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x002c flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 > ACL data: handle 0x002c flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 > ACL data: handle 0x002c flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x002c flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x002c flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x002c flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x002c flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x002c flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 > ACL data: handle 0x002c flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x002c flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x002c flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x002c flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x002c flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2C 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 2C 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 < HCI Command: Create Connection(0x01|0x0005) plen 13 62 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Disconn Complete(0x05) plen 4 00 2C 00 16 > HCI Event: Role Change(0x12) plen 8 00 62 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 2F 00 62 1D B1 72 02 00 01 00 < ACL data: handle 0x002f flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 2F 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 62 1D B1 72 02 00 01 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 2F 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > HCI Event: Max Slots Change(0x1b) plen 3 2F 00 05 > ACL data: handle 0x002f flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x002f flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > ACL data: handle 0x002f flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x002f flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x002f flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 2F 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 2F 00 FE < HCI Command: Get Link Quality(0x05|0x0003) plen 2 2F 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 2F 00 FF < ACL data: handle 0x002f flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 < ACL data: handle 0x002f flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x002f flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x002f flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > ACL data: handle 0x002f flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > ACL data: handle 0x002f flags 0x02 dlen 17 > ACL data: handle 0x002f flags 0x01 dlen 17 > ACL data: handle 0x002f flags 0x01 dlen 17 > ACL data: handle 0x002f flags 0x01 dlen 17 > ACL data: handle 0x002f flags 0x01 dlen 13 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x002f flags 0x02 dlen 17 > ACL data: handle 0x002f flags 0x01 dlen 17 > ACL data: handle 0x002f flags 0x01 dlen 11 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x002f flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x002f flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x002f flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x002f flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 > ACL data: handle 0x002f flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x002f flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x002f flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x002f flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x002f flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2F 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 2F 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Disconn Complete(0x05) plen 4 00 2F 00 16 > HCI Event: Role Change(0x12) plen 8 00 6C 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 2B 00 6C 1D B1 72 02 00 01 00 < ACL data: handle 0x002b flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 2B 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 6C 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 2B 00 > HCI Event: Max Slots Change(0x1b) plen 3 2B 00 05 > ACL data: handle 0x002b flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x002b flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > ACL data: handle 0x002b flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x002b flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x002b flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 2B 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 2B 00 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 2B 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 2B 00 FF < ACL data: handle 0x002b flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x002b flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x002b flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 < ACL data: handle 0x002b flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > ACL data: handle 0x002b flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > ACL data: handle 0x002b flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x002b flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x002b flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x002b flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x002b flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x002b flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 > ACL data: handle 0x002b flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x002b flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x002b flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x002b flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x002b flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 2B 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 2B 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 < HCI Command: Create Connection(0x01|0x0005) plen 13 62 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Disconn Complete(0x05) plen 4 00 2B 00 16 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 0C 01 05 04 > HCI Event: Connect Complete(0x03) plen 11 04 00 00 62 1D B1 72 02 00 01 00 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Role Change(0x12) plen 8 00 6C 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 29 00 6C 1D B1 72 02 00 01 00 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 29 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 6C 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 29 00 > HCI Event: Max Slots Change(0x1b) plen 3 29 00 05 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 29 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 29 00 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 29 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 29 00 FC < ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x0029 flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x0029 flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x0029 flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x0029 flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 29 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 < HCI Command: Create Connection(0x01|0x0005) plen 13 62 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Disconn Complete(0x05) plen 4 00 29 00 16 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 0C 01 05 04 > HCI Event: Connect Complete(0x03) plen 11 04 00 00 62 1D B1 72 02 00 01 00 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Role Change(0x12) plen 8 00 6C 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 29 00 6C 1D B1 72 02 00 01 00 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 29 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 6C 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 29 00 > HCI Event: Max Slots Change(0x1b) plen 3 29 00 05 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 29 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 29 00 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 29 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 29 00 FF < ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x0029 flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x0029 flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x0029 flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x0029 flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 > ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 < HCI Command: Disconnect(0x01|0x0006) plen 3 29 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 < HCI Command: Create Connection(0x01|0x0005) plen 13 62 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Disconn Complete(0x05) plen 4 00 29 00 16 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 0C 01 05 04 > HCI Event: Connect Complete(0x03) plen 11 04 00 00 62 1D B1 72 02 00 01 00 < HCI Command: Create Connection(0x01|0x0005) plen 13 6C 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Role Change(0x12) plen 8 00 6C 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 29 00 6C 1D B1 72 02 00 01 00 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 136 scid 0x0040 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 29 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 6C 1D B1 72 02 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 29 00 > HCI Event: Max Slots Change(0x1b) plen 3 29 00 05 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 255 < ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < HCI Command: Read RSSI(0x05|0x0005) plen 2 29 00 > HCI Event: Command Complete(0x0e) plen 7 01 05 14 00 29 00 00 < HCI Command: Get Link Quality(0x05|0x0003) plen 2 29 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Command Complete(0x0e) plen 7 01 03 14 00 29 00 FF < ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 < ACL data: handle 0x0029 flags 0x02 dlen 52 L2CAP(d): cid 0x40 len 48 [psm 136] 73 72 00 21 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 71 75 65 73 74 A1 D5 1D 42 10 6E 06 E0 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 8 L2CAP(d): cid 0x40 len 4 [psm 136] AC ED 00 05 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 81 L2CAP(d): cid 0x40 len 77 [psm 136] 73 72 00 22 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 4E 61 6D 65 52 65 73 70 6F 6E 73 65 76 7D F4 5B 1B FE 13 06 02 00 01 4C 00 04 6E 61 6D 65 74 00 12 4C 6A 61 76 61 2F 6C 61 6E 67 2F 53 74 72 69 6E 67 3B > ACL data: handle 0x0029 flags 0x02 dlen 45 L2CAP(d): cid 0x40 len 41 [psm 136] 78 72 00 1A 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 65 73 73 61 67 65 0B 5E 4A 75 9F 43 6E A7 02 00 00 > ACL data: handle 0x0029 flags 0x02 dlen 6 L2CAP(d): cid 0x40 len 2 [psm 136] 78 70 > ACL data: handle 0x0029 flags 0x02 dlen 17 L2CAP(d): cid 0x40 len 13 [psm 136] 74 00 0A 54 65 73 74 53 65 72 76 65 72 < ACL data: handle 0x0029 flags 0x02 dlen 55 L2CAP(d): cid 0x40 len 51 [psm 136] 73 72 00 24 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 71 75 65 73 74 19 0D EF 40 73 87 D4 D5 02 00 00 < ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 01 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 > ACL data: handle 0x0029 flags 0x02 dlen 71 L2CAP(d): cid 0x40 len 67 [psm 136] 73 72 00 25 64 65 2E 75 70 62 2E 6A 74 6F 6F 74 68 2E 64 65 6D 6F 2E 4D 73 67 43 6F 6E 74 65 6E 74 52 65 73 70 6F 6E 73 65 D0 C0 0F B1 05 F4 9F D7 02 00 01 4C 00 07 63 6F 6E 74 65 6E 74 71 00 7E 00 01 > ACL data: handle 0x0029 flags 0x02 dlen 10 L2CAP(d): cid 0x40 len 6 [psm 136] 78 71 00 7E 00 02 > ACL data: handle 0x0029 flags 0x02 dlen 123 L2CAP(d): cid 0x40 len 119 [psm 136] 74 00 74 3C 68 74 6D 6C 3E 0A 3C 68 65 61 64 3E 0A 3C 68 31 3E 54 68 69 73 20 70 61 67 65 20 77 65 6E 74 20 6F 6E 20 61 69 72 21 21 21 3C 2F 68 31 3E 0A 3C 2F 68 65 61 64 3E 0A 3C 62 6F 64 79 3E 0A 54 65 73 74 50 61 67 65 20 73 75 63 63 65 73 73 66 75 6C 6C 79 20 74 72 61 6E 73 6D 69 74 74 65 64 21 21 21 0A 3C 2F 62 6F 64 79 3E 0A 3C 2F 68 74 6D 6C 3E 0A > ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets(0x13) plen 5 01 29 00 01 00 < HCI Command: Disconnect(0x01|0x0006) plen 3 29 00 13 > HCI Event: Command Status(0x0f) plen 4 00 01 06 04 < HCI Command: Create Connection(0x01|0x0005) plen 13 62 1D B1 72 02 00 18 CC 02 00 00 00 01 > HCI Event: Command Status(0x0f) plen 4 00 01 05 04 > HCI Event: Disconn Complete(0x05) plen 4 00 29 00 16 > HCI Event: Role Change(0x12) plen 8 00 62 1D B1 72 02 00 01 > HCI Event: Connect Complete(0x03) plen 11 00 2D 00 62 1D B1 72 02 00 01 00 < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4 2D 00 0F 00 > HCI Event: Page Scan Repetition Mode Change(0x20) plen 7 62 1D B1 72 02 00 01 > HCI Event: Command Complete(0x0e) plen 6 01 0D 08 00 2D 00 > HCI Event: Max Slots Change(0x1b) plen 3 2D 00 05 ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-14 19:11 ` Stefan Mischke @ 2004-09-14 19:24 ` Marcel Holtmann 2004-09-14 19:37 ` Stefan Mischke 0 siblings, 1 reply; 22+ messages in thread From: Marcel Holtmann @ 2004-09-14 19:24 UTC (permalink / raw) To: Stefan Mischke; +Cc: BlueZ Mailing List Hi Stefan, > >run "hcidump -x" as root and show us the problematic parts. What kind of > >dongles are you using? Do you changed any of hcid.conf settings or do > >you set the master/rswitch on the listening L2CAP socket? > > > I'm using Acer BT600 Class II dongles (CSR chipset I think). > 00:02:72:B1:1D:6C is a listening server (master). > 00:02:72:B1:1D:62 is also a listening server (master). > 00:02:72:B1:59:46 is the connecting client (slave). before I start looking at the dump, include the output of hciconfig -a. Are you sure that both of your listining servers are set for switching the role to master after connection? Remember that the connecting device is master in the first place. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-14 19:24 ` Marcel Holtmann @ 2004-09-14 19:37 ` Stefan Mischke 2004-09-14 19:49 ` Marcel Holtmann 0 siblings, 1 reply; 22+ messages in thread From: Stefan Mischke @ 2004-09-14 19:37 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List Marcel Holtmann schrieb: >before I start looking at the dump, include the output of hciconfig -a. > > I forgot to mention that the hcidump was taken at the connecting client, but that's obvious. Ok, here are the hciconfig -a of all three devices: 00:02:72:B1:1D:6C is a listening server (master). 00:02:72:B1:1D:62 is also a listening server (master). 00:02:72:B1:59:46 is the connecting client (slave). hci0: Type: USB BD Address: 00:02:72:B1:59:46 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:403338 acl:11683 sco:0 events:15307 errors:0 TX bytes:222599 acl:7967 sco:0 commands:4111 errors:0 Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ (0)' Class: 0x000100 Service Classes: Unspecified Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d Manufacturer: Cambridge Silicon Radio (10) hci0: Type: USB BD Address: 00:02:72:B1:1D:6C ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:604827 acl:18955 sco:0 events:25430 errors:0 TX bytes:683933 acl:18133 sco:0 commands:2396 errors:0 Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ (0)' Class: 0x000100 Service Classes: Unspecified Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d Manufacturer: Cambridge Silicon Radio (10) hci0: Type: USB BD Address: 00:02:72:B1:1D:62 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:344077 acl:15137 sco:0 events:11370 errors:0 TX bytes:395720 acl:10616 sco:0 commands:241 errors:0 Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ (0)' Class: 0x000100 Service Classes: Unspecified Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d Manufacturer: Cambridge Silicon Radio (10) >Are you sure that both of your listining servers are set for switching >the role to master after connection? Remember that the connecting device >is master in the first place. > > > Yes, I'm aware of that, but I don't know if this is a problem. It looks like this at the client: Connections: < ACL 00:02:72:B1:1D:62 handle 0 state 5 lm MASTER Connections: < ACL 00:02:72:B1:1D:62 handle 44 state 1 lm SLAVE Connections: < ACL 00:02:72:B1:1D:62 handle 0 state 5 lm MASTER Connections: < ACL 00:02:72:B1:1D:62 handle 48 state 1 lm SLAVE Connections: < ACL 00:02:72:B1:1D:62 handle 0 state 5 lm MASTER Connections: < ACL 00:02:72:B1:1D:62 handle 47 state 1 lm SLAVE Connections: < ACL 00:02:72:B1:1D:6C handle 0 state 5 lm MASTER Connections: < ACL 00:02:72:B1:1D:6C handle 41 state 1 lm SLAVE Connections: < ACL 00:02:72:B1:1D:62 handle 0 state 5 lm MASTER Connections: < ACL 00:02:72:B1:1D:62 handle 46 state 1 lm SLAVE Connections: < ACL 00:02:72:B1:1D:6C handle 0 state 5 lm MASTER Connections: < ACL 00:02:72:B1:1D:6C handle 42 state 1 lm SLAVE Connections: < ACL 00:02:72:B1:1D:62 handle 0 state 5 lm MASTER Connections: < ACL 00:02:72:B1:1D:62 handle 48 state 1 lm SLAVE Connections: < ACL 00:02:72:B1:1D:62 handle 0 state 5 lm MASTER Connections: < ACL 00:02:72:B1:1D:62 handle 47 state 1 lm SLAVE ... Regards Stefan ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-14 19:37 ` Stefan Mischke @ 2004-09-14 19:49 ` Marcel Holtmann 2004-09-14 20:10 ` Stefan Mischke 0 siblings, 1 reply; 22+ messages in thread From: Marcel Holtmann @ 2004-09-14 19:49 UTC (permalink / raw) To: Stefan Mischke; +Cc: BlueZ Mailing List Hi Stefan, > >Are you sure that both of your listining servers are set for switching > >the role to master after connection? Remember that the connecting device > >is master in the first place. > > > Yes, I'm aware of that, but I don't know if this is a problem. It looks > like this at the client: your firmware is HCI 16.4 which is good, but you are going to create a scatternet on your client and that can be the problem. Looks like this is an internal problem of the CSR firmware. Try to introduce some delays between the connections and see if that helps. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-14 19:49 ` Marcel Holtmann @ 2004-09-14 20:10 ` Stefan Mischke 2004-09-14 21:12 ` Marcel Holtmann 0 siblings, 1 reply; 22+ messages in thread From: Stefan Mischke @ 2004-09-14 20:10 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List [-- Attachment #1: Type: text/html, Size: 1979 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-14 20:10 ` Stefan Mischke @ 2004-09-14 21:12 ` Marcel Holtmann 2004-09-14 23:37 ` Stefan Mischke 0 siblings, 1 reply; 22+ messages in thread From: Marcel Holtmann @ 2004-09-14 21:12 UTC (permalink / raw) To: Stefan Mischke; +Cc: BlueZ Mailing List Hi Stefan, > > your firmware is HCI 16.4 which is good, but you are going to create a > > scatternet on your client and that can be the problem. Looks like this > > is an internal problem of the CSR firmware. > You mean the dongles try to create a scatternet (with packet routing > and so on) on their own? I always thought a scatternet has to be > implemented outside the hard-/firmware. no, you only create a scatternet. This means when one device must be member of two different piconets. > Is there a way to upgrade it? Are there better dongles the University > could buy? You can upgrade the D-Link DBT-120 Rev. B3 with the Apple firmware update package to HCI 18.1. > > Try to introduce some delays > > between the connections and see if that helps. > > > I'm experimenting with delays and timeouts for three days now. It > helps... a bit, but not really good. I just tried to switch > master-slave, but it doesn't really help. I think you should avoid the role-switching and keep the listening applications as slaves. In this case the client creates the piconet and can keep both servers in the same piconet. > One year ago, I wrote another Location Awareness App on top of a > modified JBlueZ and it just used ACL links to measure RSSI and LQ. It > worked. I probably have to take care of the ACLs myself (does L2CAP > use existing ACLs?). The only drawback: The App has to run as root :(. The L2CAP creates the same ACL links, so this can't be the problem. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-14 21:12 ` Marcel Holtmann @ 2004-09-14 23:37 ` Stefan Mischke 2004-09-15 7:46 ` Marcel Holtmann 0 siblings, 1 reply; 22+ messages in thread From: Stefan Mischke @ 2004-09-14 23:37 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List [-- Attachment #1: Type: text/html, Size: 3647 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-14 23:37 ` Stefan Mischke @ 2004-09-15 7:46 ` Marcel Holtmann 2004-09-15 14:00 ` Stefan Mischke 2004-09-15 20:37 ` Stefan Mischke 0 siblings, 2 replies; 22+ messages in thread From: Marcel Holtmann @ 2004-09-15 7:46 UTC (permalink / raw) To: Stefan Mischke; +Cc: BlueZ Mailing List Hi Stefan, > > > Is there a way to upgrade it? Are there better dongles the University > > > could buy? > > > > > You can upgrade the D-Link DBT-120 Rev. B3 with the Apple firmware > > update package to HCI 18.1. > > > Would that solve the problem? Actually, is it a known problem? only if there was a bug in previous CSR firmwares, but on the other hand the HCI 18.x firmwares are Bluetooth 1.2 capable. > Btw, I read something about getting RSSI via Inquiry. Is it possible > with BlueZ? This could be used to faster decrease the backoff if the > unavailable device is found by inquiry and probably with a good RSSI > near 0. You need a CSR dongle with HCI 18.x firmware, a newer Silicon Wave or the AVM BlueFRITZ! USB v2.0 to use inquiry with RSSI. The support is already included in BlueZ. > > > One year ago, I wrote another Location Awareness App on top of a > > > modified JBlueZ and it just used ACL links to measure RSSI and LQ. It > > > worked. I probably have to take care of the ACLs myself (does L2CAP > > > use existing ACLs?). The only drawback: The App has to run as root :(. > > > > > The L2CAP creates the same ACL links, so this can't be the problem. > > > Yes, but I could disconnect faster on timeout and make L2CAP throw a > clean error instead of behaving strange. > > Connections: > < ACL 00:02:72:B1:1D:62 handle 0 state 5 lm MASTER > < ACL 00:02:72:B1:1D:6C handle 45 state 1 lm MASTER > > stargazer:~ # hcitool dc 00:02:72:B1:1D:62 > Disconnect failed: Input/output error > > The connection to 62 persists even 5 minutes after I pulled the 62 > Dongle out. A manual disconnect failed. This simply can't be! I > sometimes even have to reboot because BlueZ or something is confused. > I think there is a serious problem. I'll do further testing tomorrow. There are more than one timeouts in the BlueZ stack. Even the ACL disconnect timeout is different for the initiator and the acceptor of and ACL connection. Keep an eye on the HCI disconnect events on each of your devices and compare the timestamps. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-15 7:46 ` Marcel Holtmann @ 2004-09-15 14:00 ` Stefan Mischke 2004-09-15 21:09 ` Marcel Holtmann 2004-09-15 20:37 ` Stefan Mischke 1 sibling, 1 reply; 22+ messages in thread From: Stefan Mischke @ 2004-09-15 14:00 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List, Bernd Eßmann Hello again! Marcel Holtmann schrieb: >There are more than one timeouts in the BlueZ stack. Even the ACL >disconnect timeout is different for the initiator and the acceptor of >and ACL connection. Keep an eye on the HCI disconnect events on each of >your devices and compare the timestamps. > > > Hmmm, these timeouts are really difficult. I've written a script "l2client.sh" (see below) using bluez-utils' l2test to make sure the problem is not inside of my code. I also included the output of a testrun. Take a look at it! #### BEGIN SCRIPT l2client.sh #### #!/bin/bash ROUNDS=10 SLEEP=`which sleep` TSLEEP=5 SERVER1="00:02:72:B1:1D:6C" SERVER2="00:02:72:B1:1D:62" for i in `seq 1 $ROUNDS`; do printf "Round $i of $ROUNDS\n" printf "Connecting to Server $SERVER1...\n" l2test -s -N 1 $SERVER1 printf "\n" printf "Connecting to Server $SERVER2...\n" l2test -s -N 1 $SERVER2 & printf "Waiting for $TSLEEP seconds...\n" $SLEEP ${TSLEEP}s printf "\n" done printf "l2client.sh terminating.\n" #### END SCRIPT l2client.sh #### I ran "l2client.sh" on 00:02:72:B1:59:46 and "l2test -r" on 00:02:72:B1:1D:6C and 00:02:72:B1:1D:62. After the 2nd round, I pulled out dongle 00:02:72:B1:1D:62. See what happens... #### BEGIN OUTPUT OF SCRIPT l2client.sh #### Round 1 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4385]: Connected [imtu 672, omtu 672, flush_to 65535] l2test[4385]: Sending ... l2test[4385]: Closing channel ... l2test[4385]: Done l2test[4385]: Exit Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... l2test[4386]: Connected [imtu 672, omtu 672, flush_to 65535] l2test[4386]: Sending ... l2test[4386]: Closing channel ... l2test[4386]: Done l2test[4386]: Exit Round 2 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4388]: Connected [imtu 672, omtu 672, flush_to 65535] l2test[4388]: Sending ... l2test[4388]: Closing channel ... l2test[4388]: Done l2test[4388]: Exit Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... l2test[4389]: Connected [imtu 672, omtu 672, flush_to 65535] l2test[4389]: Sending ... l2test[4389]: Closing channel ... l2test[4389]: Done l2test[4389]: Exit Round 3 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4391]: Connected [imtu 672, omtu 672, flush_to 65535] l2test[4391]: Sending ... l2test[4391]: Closing channel ... l2test[4391]: Done l2test[4391]: Exit Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... Round 4 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4394]: Can't connect. Device or resource busy(16) Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... Round 5 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4397]: Can't connect. Device or resource busy(16) Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... Round 6 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4400]: Can't connect. Device or resource busy(16) Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... Round 7 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4403]: Can't connect. Device or resource busy(16) Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... l2test[4404]: Can't connect. Host is down(112) l2test[4401]: Can't connect. Host is down(112) l2test[4398]: Can't connect. Host is down(112) l2test[4395]: Can't connect. Host is down(112) l2test[4392]: Can't connect. Host is down(112) Round 8 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4406]: Connected [imtu 672, omtu 672, flush_to 65535] l2test[4406]: Sending ... l2test[4406]: Closing channel ... l2test[4406]: Done l2test[4406]: Exit Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... Round 9 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4409]: Can't connect. Device or resource busy(16) Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... Round 10 of 10 Connecting to Server 00:02:72:B1:1D:6C... l2test[4412]: Can't connect. Device or resource busy(16) Connecting to Server 00:02:72:B1:1D:62... Waiting for 5 seconds... l2client.sh terminating. l2test[4413]: Can't connect. Host is down(112) l2test[4407]: Can't connect. Host is down(112) l2test[4410]: Can't connect. Host is down(112) #### END OUTPUT OF SCRIPT l2client.sh #### After "l2client.sh" tries to contact the unreachable host 00:02:72:B1:1D:62, all connection attempts to the reachable hist 00:02:72:B1:1D:6C fail with errno 16. Just before round 8, all connection attempts to 00:02:72:B1:1D:62 fail together with errno 112 and in round 8 the connection attempt to 00:02:72:B1:1D:6C succeeds. But even after one more connection attempt to the unreachable 00:02:72:B1:1D:62, the connection attempts to 00:02:72:B1:1D:6C fail again. After "l2client.sh" has already terminated, the remaining backgrounded l2sends fail. So there is really a problem if I don't wait for connect to fail with errno 112. My Location Awareness App of course can't afford to wait for 20 seconds. But how to solve this? I hope to get another dongle this evening, so I can equip the client with it and test if the dongle matters. Regards Stefan ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-15 14:00 ` Stefan Mischke @ 2004-09-15 21:09 ` Marcel Holtmann 2004-09-15 22:26 ` Stefan Mischke 2004-09-16 10:30 ` Stefan Mischke 0 siblings, 2 replies; 22+ messages in thread From: Marcel Holtmann @ 2004-09-15 21:09 UTC (permalink / raw) To: Stefan Mischke; +Cc: BlueZ Mailing List, Bernd Eßmann Hi Stefan, > Hmmm, these timeouts are really difficult. I've written a script > "l2client.sh" (see below) using bluez-utils' l2test to make sure the > problem is not inside of my code. I also included the output of a > testrun. Take a look at it! > > #### BEGIN SCRIPT l2client.sh #### > > #!/bin/bash > > ROUNDS=10 > SLEEP=`which sleep` > TSLEEP=5 > SERVER1="00:02:72:B1:1D:6C" > SERVER2="00:02:72:B1:1D:62" > > for i in `seq 1 $ROUNDS`; > do > printf "Round $i of $ROUNDS\n" > > printf "Connecting to Server $SERVER1...\n" > l2test -s -N 1 $SERVER1 > printf "\n" > > printf "Connecting to Server $SERVER2...\n" > l2test -s -N 1 $SERVER2 & > printf "Waiting for $TSLEEP seconds...\n" > $SLEEP ${TSLEEP}s > printf "\n" > done > > printf "l2client.sh terminating.\n" > > #### END SCRIPT l2client.sh #### use the linger support of the L2CAP socket and put a "sleep 2" between the first and the second l2test call. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-15 21:09 ` Marcel Holtmann @ 2004-09-15 22:26 ` Stefan Mischke 2004-09-16 10:30 ` Stefan Mischke 1 sibling, 0 replies; 22+ messages in thread From: Stefan Mischke @ 2004-09-15 22:26 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List, Bernd Eßmann Hi Marcel! Marcel Holtmann schrieb: >use the linger support of the L2CAP socket and put a "sleep 2" between >the first and the second l2test call. > > > I'll give it a try tomorrow. I already tried the lingering option to be able to close the socket directly after the last send, but it didn't work for me. I had to put a sleep 1000 (ms) to prevent read errors. As much as I understood the man pages.... "When enabled, a *close <http://www.die.net/doc/linux/man/man2/close.2.html>*(2) or *shutdown <http://www.die.net/doc/linux/man/man2/shutdown.2.html>*(2) will not return until all queued messages for the socket have been successfully sent or the linger timeout has been reached. Otherwise, the call returns immediately and the closing is done in the background. When the socket is closed as part of *exit*(2), it always lingers in the background." ...disabling linger makes also a clean shutdown in the background. Is there also a timeout for background lingering? Anyway, thanks a lot for your help. I really appreciate it. I'll test your linger suggestion tomorrow. But I'm still of the opinion that l2cap should not return errno 16 to connection attempts to reachable devices even if a connection attempt is in progress to an unreachable device. There should be some concurrency possible. Regards Stefan ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-15 21:09 ` Marcel Holtmann 2004-09-15 22:26 ` Stefan Mischke @ 2004-09-16 10:30 ` Stefan Mischke 2004-09-16 10:34 ` Marcel Holtmann 1 sibling, 1 reply; 22+ messages in thread From: Stefan Mischke @ 2004-09-16 10:30 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List, Bernd Eßmann Hi Marcel! Marcel Holtmann schrieb: >use the linger support of the L2CAP socket and put a "sleep 2" between >the first and the second l2test call. > > > Your suggestions have no effect for me. Still errno 16. I think at the moment it is not possible to connect concurrently via l2cap if one device is down. But as a workaround I can use non-blocking connect (but with a timeout of 60 seconds just to prevent deadlocks) and simply reduce the pageto. My connection attempts are sequential anyway because of the master-slave-limit. But I would suggest to change the behavior of l2cap to allow more concurrent connection attempts even if some devices are down. Regards Stefan ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-16 10:30 ` Stefan Mischke @ 2004-09-16 10:34 ` Marcel Holtmann 2004-09-16 10:39 ` Stefan Mischke 0 siblings, 1 reply; 22+ messages in thread From: Marcel Holtmann @ 2004-09-16 10:34 UTC (permalink / raw) To: Stefan Mischke; +Cc: BlueZ Mailing List, Bernd Eßmann Hi Stefan, > Your suggestions have no effect for me. Still errno 16. I think at the > moment it is not possible to connect concurrently via l2cap if one > device is down. But as a workaround I can use non-blocking connect (but > with a timeout of 60 seconds just to prevent deadlocks) and simply > reduce the pageto. My connection attempts are sequential anyway because > of the master-slave-limit. But I would suggest to change the behavior of > l2cap to allow more concurrent connection attempts even if some devices > are down. use hcidump and check the result code of the failing HCI connection complete event. Look them up in the Bluetooth specification. This may lights this behaviour a little bit more up. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-16 10:34 ` Marcel Holtmann @ 2004-09-16 10:39 ` Stefan Mischke 2004-09-16 11:00 ` Marcel Holtmann 0 siblings, 1 reply; 22+ messages in thread From: Stefan Mischke @ 2004-09-16 10:39 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List, Bernd Eßmann [-- Attachment #1: Type: text/html, Size: 1289 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-16 10:39 ` Stefan Mischke @ 2004-09-16 11:00 ` Marcel Holtmann 2004-09-16 11:10 ` Stefan Mischke 2004-09-16 16:41 ` Stefan Mischke 0 siblings, 2 replies; 22+ messages in thread From: Marcel Holtmann @ 2004-09-16 11:00 UTC (permalink / raw) To: Stefan Mischke; +Cc: BlueZ Mailing List, Bernd Eßmann Hi Stefan, > > > Your suggestions have no effect for me. Still errno 16. I think at the > > > moment it is not possible to connect concurrently via l2cap if one > > > device is down. But as a workaround I can use non-blocking connect (but > > > with a timeout of 60 seconds just to prevent deadlocks) and simply > > > reduce the pageto. My connection attempts are sequential anyway because > > > of the master-slave-limit. But I would suggest to change the behavior of > > > l2cap to allow more concurrent connection attempts even if some devices > > > are down. > > > > > use hcidump and check the result code of the failing HCI connection > > complete event. Look them up in the Bluetooth specification. This may > > lights this behaviour a little bit more up. > > > I guess you mean one paging process at one time per device? :) there is always an underlaying creation of an ACL link and this fails for you. The Bluetooth error codes don't map 1:1 to Unix error codes, so use hcidump to find out the Bluetooth error and look up what it means. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-16 11:00 ` Marcel Holtmann @ 2004-09-16 11:10 ` Stefan Mischke 2004-09-16 16:41 ` Stefan Mischke 1 sibling, 0 replies; 22+ messages in thread From: Stefan Mischke @ 2004-09-16 11:10 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List, Bernd Eßmann [-- Attachment #1: Type: text/html, Size: 1255 bytes --] ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-16 11:00 ` Marcel Holtmann 2004-09-16 11:10 ` Stefan Mischke @ 2004-09-16 16:41 ` Stefan Mischke 1 sibling, 0 replies; 22+ messages in thread From: Stefan Mischke @ 2004-09-16 16:41 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List, Bernd Eßmann Hi! Now all my problems are solved using hci_write_page_timeout and hci_write_supervision_timeout. It's probably not the most elegant way since one has to be root and it disturbs other programs using the same device, but I think there is no other way if you don't want one unreachable device to freeze your whole application. I learned a lot during this long thread and I think we can close it now :). Regards Stefan ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-15 7:46 ` Marcel Holtmann 2004-09-15 14:00 ` Stefan Mischke @ 2004-09-15 20:37 ` Stefan Mischke 2004-09-15 21:06 ` Marcel Holtmann 1 sibling, 1 reply; 22+ messages in thread From: Stefan Mischke @ 2004-09-15 20:37 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List Hello Marcel! I just tested this rather old dongle: hci0: Type: USB BD Address: 00:06:AB:80:6F:5C ACL MTU: 377:10 SCO MTU: 16:0 UP RUNNING PSCAN ISCAN RX bytes:64709 acl:1565 sco:0 events:1055 errors:0 TX bytes:38780 acl:1236 sco:0 commands:297 errors:0 Features: 0xff 0xfd 0x05 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ (0)' Class: 0x000100 Service Classes: Unspecified Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0x2 LMP Ver: 1.1 (0x1) LMP Subver: 0x1007 Manufacturer: Broadcom Corporation (15) Same problem. I tried the same dongle one year ago and it was not supported by BlueZ. Now it is. Thumbs up for that! Marcel Holtmann schrieb: >There are more than one timeouts in the BlueZ stack. Even the ACL >disconnect timeout is different for the initiator and the acceptor of >and ACL connection. Keep an eye on the HCI disconnect events on each of >your devices and compare the timestamps. > > I set my timeouts by setting SO_RCVTIMEO and SO_SNDTIMEO on the L2CAP socket. But I think this is just the socket timeout. Is there a way to influence the internal timeouts of BlueZ (L2CAP, ACL)? Regards Stefan ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-15 20:37 ` Stefan Mischke @ 2004-09-15 21:06 ` Marcel Holtmann 2004-09-15 22:13 ` Stefan Mischke 0 siblings, 1 reply; 22+ messages in thread From: Marcel Holtmann @ 2004-09-15 21:06 UTC (permalink / raw) To: Stefan Mischke; +Cc: BlueZ Mailing List Hi Stefan, > I just tested this rather old dongle: > > hci0: Type: USB > BD Address: 00:06:AB:80:6F:5C ACL MTU: 377:10 SCO MTU: 16:0 > UP RUNNING PSCAN ISCAN > RX bytes:64709 acl:1565 sco:0 events:1055 errors:0 > TX bytes:38780 acl:1236 sco:0 commands:297 errors:0 > Features: 0xff 0xfd 0x05 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH HOLD SNIFF PARK > Link mode: SLAVE ACCEPT > Name: 'BlueZ (0)' > Class: 0x000100 > Service Classes: Unspecified > Device Class: Computer, Uncategorized > HCI Ver: 1.1 (0x1) HCI Rev: 0x2 LMP Ver: 1.1 (0x1) LMP Subver: > 0x1007 > Manufacturer: Broadcom Corporation (15) > > Same problem. I tried the same dongle one year ago and it was not > supported by BlueZ. Now it is. Thumbs up for that! this is supported much longer, but it was not easy to get it working. > >There are more than one timeouts in the BlueZ stack. Even the ACL > >disconnect timeout is different for the initiator and the acceptor of > >and ACL connection. Keep an eye on the HCI disconnect events on each of > >your devices and compare the timestamps. > > > I set my timeouts by setting SO_RCVTIMEO and SO_SNDTIMEO on the L2CAP > socket. But I think this is just the socket timeout. Is there a way to > influence the internal timeouts of BlueZ (L2CAP, ACL)? You must recompile your kernel and actually modifying them makes not really sense, because for example the HCI disconnect timeout is useful to keep the ACL link open for 2-4 seconds so that it can be reused by the next L2CAP connection. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Bluez-devel] L2CAP: One failing connection hurts others? 2004-09-15 21:06 ` Marcel Holtmann @ 2004-09-15 22:13 ` Stefan Mischke 0 siblings, 0 replies; 22+ messages in thread From: Stefan Mischke @ 2004-09-15 22:13 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List Hi Marcel! Marcel Holtmann schrieb: > >this is supported much longer, but it was not easy to get it working. > > > Well, yes, I remember there was a device hci0, but it didn't work. I haven't tried any harder. Now (Kernel 2.6.5) it works just by pluggin it in as ist should. Nice, now I have 4 dongles but I need to assemble another pc from the parts lying around here... > >You must recompile your kernel and actually modifying them makes not >really sense, because for example the HCI disconnect timeout is useful >to keep the ACL link open for 2-4 seconds so that it can be reused by >the next L2CAP connection. > > > I fond something much easier and better: "hciconfig hci0 pageto <slots>". When I use connect() in blocking mode and set the pageto to a small value, the connection attempt failure is reported in acceptable time. Since hcitool can do it programmatically, I can surely do it, too (by simply looking it up). I noticed that I have to increase the pageto up to 10000 or higher for the first paging. I suppose because the clock offset needs to be synchronized and afterwards it work even with a pageto of only 1 slot (but 500 slots = 312,5 ms is ok for me). Regards Stefan ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2004-09-16 16:41 UTC | newest] Thread overview: 22+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-09-14 15:20 [Bluez-devel] L2CAP: One failing connection hurts others? Stefan Mischke 2004-09-14 18:34 ` Marcel Holtmann 2004-09-14 19:11 ` Stefan Mischke 2004-09-14 19:24 ` Marcel Holtmann 2004-09-14 19:37 ` Stefan Mischke 2004-09-14 19:49 ` Marcel Holtmann 2004-09-14 20:10 ` Stefan Mischke 2004-09-14 21:12 ` Marcel Holtmann 2004-09-14 23:37 ` Stefan Mischke 2004-09-15 7:46 ` Marcel Holtmann 2004-09-15 14:00 ` Stefan Mischke 2004-09-15 21:09 ` Marcel Holtmann 2004-09-15 22:26 ` Stefan Mischke 2004-09-16 10:30 ` Stefan Mischke 2004-09-16 10:34 ` Marcel Holtmann 2004-09-16 10:39 ` Stefan Mischke 2004-09-16 11:00 ` Marcel Holtmann 2004-09-16 11:10 ` Stefan Mischke 2004-09-16 16:41 ` Stefan Mischke 2004-09-15 20:37 ` Stefan Mischke 2004-09-15 21:06 ` Marcel Holtmann 2004-09-15 22:13 ` Stefan Mischke
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox