* [Bluez-users] "hciconfig -a" ok, but "hcitools scan" shows no devices
@ 2004-12-11 22:07 Andreas Schrell
2004-12-11 22:41 ` Marcel Holtmann
0 siblings, 1 reply; 11+ messages in thread
From: Andreas Schrell @ 2004-12-11 22:07 UTC (permalink / raw)
To: bluez-users
Hello,
I am new on this list with the following problem:
"hciconfig -a" shows
hci0: Type: USB
BD Address: 00:10:C6:3A:B5:70 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:4187 acl:0 sco:0 events:370 errors:0
TX bytes:1902 acl:0 sco:0 commands:72 errors:0
Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80
Packet type: DM1 DH1 HV1
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'delli-0'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x4f2 LMP Ver: 1.2 (0x2) LMP Subver:
0x4f2
Manufacturer: Cambridge Silicon Radio (10)
"hcitools scan" or "hcitools inq" only show scanning but no device.
Kernel versions tested where 2.6.8.1 and 2.6.10-rc3 and the following
debian packages
ii bluez-firmware 1.0-2
ii bluez-hcidump 1.12-1
ii bluez-pcmcia-support 2.10-5
ii bluez-pin 0.24-1
ii bluez-utils 2.10-5
dmesg:Bluetooth: Core ver 2.7
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.7
Bluetooth: L2CAP ver 2.6
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Tested also with --length=30, --flush
System is a Dell 8600 and a Siemens S65 mobile.
Any idea what to do next???
Thanx a lot
Andreas
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [Bluez-users] "hciconfig -a" ok, but "hcitools scan" shows no devices
2004-12-11 22:07 [Bluez-users] "hciconfig -a" ok, but "hcitools scan" shows no devices Andreas Schrell
@ 2004-12-11 22:41 ` Marcel Holtmann
2004-12-12 7:48 ` [Bluez-users] 'hciconfig -a' ok, but 'hcitools scan' " Andreas Schrell
0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2004-12-11 22:41 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Andreas,
> I am new on this list with the following problem:
>
> "hciconfig -a" shows
>
> hci0: Type: USB
> BD Address: 00:10:C6:3A:B5:70 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:4187 acl:0 sco:0 events:370 errors:0
> TX bytes:1902 acl:0 sco:0 commands:72 errors:0
> Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80
> Packet type: DM1 DH1 HV1
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'delli-0'
> Class: 0x000100
> Service Classes: Unspecified
> Device Class: Computer, Uncategorized
> HCI Ver: 1.2 (0x2) HCI Rev: 0x4f2 LMP Ver: 1.2 (0x2) LMP Subver:
> 0x4f2
> Manufacturer: Cambridge Silicon Radio (10)
>
> "hcitools scan" or "hcitools inq" only show scanning but no device.
>
> Kernel versions tested where 2.6.8.1 and 2.6.10-rc3 and the following
> debian packages
>
> ii bluez-firmware 1.0-2
> ii bluez-hcidump 1.12-1
> ii bluez-pcmcia-support 2.10-5
> ii bluez-pin 0.24-1
> ii bluez-utils 2.10-5
>
> dmesg:Bluetooth: Core ver 2.7
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: HCI USB driver ver 2.7
> Bluetooth: L2CAP ver 2.6
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: RFCOMM ver 1.3
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM TTY layer initialized
>
> Tested also with --length=30, --flush
>
> System is a Dell 8600 and a Siemens S65 mobile.
so this is the original firmware in the Bluetooth chip? You haven't
flashed it? Is there a wireless switch on that machine? Maybe you need
to activate the antenna.
Please show us "/proc/bus/usb/devices" and what "hcidump -X" showing.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] 'hciconfig -a' ok, but 'hcitools scan' shows no devices
2004-12-11 22:41 ` Marcel Holtmann
@ 2004-12-12 7:48 ` Andreas Schrell
2004-12-12 8:06 ` Marcel Holtmann
0 siblings, 1 reply; 11+ messages in thread
From: Andreas Schrell @ 2004-12-12 7:48 UTC (permalink / raw)
To: bluez-users
Marcel,
yes original firmware, internal Bluetooth from Dell
/proc/bus/usb/devices:
delli:~# cat /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-rc3as1 ehci_hcd
S: Product=Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-rc3as1 uhci_hcd
S: Product=Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #3
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-rc3as1 uhci_hcd
S: Product=Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #2
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=120/900 us (13%), #Int= 2, #Iso= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-rc3as1 uhci_hcd
S: Product=Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #1
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05fe ProdID=0011 Rev= 0.10
S: Manufacturer=Cypress Sem
S: Product=PS2/USB Browser Combo Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=413c ProdID=8000 Rev=12.66
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
And hcidump -X from "hciconfig -a" and "hcitool scan":
HCIDump - HCI packet analyzer ver 1.12
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Command Complete (0x0e) plen 252
0000: 01 14 0c 00 64 65 6c 6c 69 2d 30 00 00 00 00 00 ....delli-0.....
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00f0: 00 00 00 00 00 00 00 00 00 00 00 00 ............
< HCI Command: Read Class of Device (0x03|0x0023) plen 0
> HCI Event: Command Complete (0x0e) plen 7
0000: 01 23 0c 00 00 01 00 .#.....
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> HCI Event: Command Complete (0x0e) plen 12
0000: 01 01 10 00 02 f2 04 02 0a 00 f2 04 ............
< HCI Command: Inquiry (0x01|0x0001) plen 5
0000: 33 8b 9e 08 64 3...d
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 01 04 ....
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Inquiry Complete (0x01) plen 1
0000: 00 .
and with S65:
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Command Complete (0x0e) plen 252
0000: 01 14 0c 00 64 65 6c 6c 69 2d 30 00 00 00 00 00 ....delli-0.....
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00f0: 00 00 00 00 00 00 00 00 00 00 00 00 ............
< HCI Command: Read Class of Device (0x03|0x0023) plen 0
> HCI Event: Command Complete (0x0e) plen 7
0000: 01 23 0c 00 00 01 00 .#.....
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> HCI Event: Command Complete (0x0e) plen 12
0000: 01 01 10 00 02 f2 04 02 0a 00 f2 04 ............
< HCI Command: Inquiry (0x01|0x0001) plen 5
0000: 33 8b 9e 08 64 3...d
> HCI Event: Command Status (0x0f) plen 4
0000: 00 01 01 04 ....
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Vendor (0xff) plen 7
CSR: VM (channel 13)
0000: 03 00 04 00 00 00 ......
> HCI Event: Inquiry Complete (0x01) plen 1
0000: 00 .
I think these are the same.
I can switch Bluetooth off and on. If I press the button I get
< HCI Command: Reset (0x03|0x0003) plen 0
Receive failed: Broken pipe
and in syslog
Dec 12 08:44:57 localhost kernel: atkbd.c: Unknown key pressed (translated
set 2, code 0x88 on isa0060/serio0).
Dec 12 08:44:57 localhost kernel: atkbd.c: Use 'setkeycodes e008
<keycode>' to make it known.
Dec 12 08:44:57 localhost kernel: usb 1-2: USB disconnect, address 6
Dec 12 08:44:57 localhost hcid[9862]: HCI dev 0 down
Dec 12 08:44:57 localhost hcid[9862]: Stoping security manager 0
Dec 12 08:44:57 localhost hcid[9862]: HCI dev 0 unregistered
next time I get
Dec 12 08:46:06 localhost hcid[9862]: HCI dev 0 up
Dec 12 08:46:06 localhost hcid[9862]: Starting security manager 0
Dec 12 08:46:09 localhost usb.agent[25983]: hci_usb: already loaded
Dec 12 08:46:09 localhost usb.agent[25988]: hci_usb: already loaded
Dec 12 08:46:09 localhost usb.agent[25993]: hci_usb: already loaded
Look ok for me.
I tested a Nokia 6310i also, which is also not found.
Andreas
> Hi Andreas,
>
>> I am new on this list with the following problem:
>>
>> "hciconfig -a" shows
>>
>> hci0: Type: USB
>> BD Address: 00:10:C6:3A:B5:70 ACL MTU: 192:8 SCO MTU: 64:8
>> UP RUNNING PSCAN ISCAN
>> RX bytes:4187 acl:0 sco:0 events:370 errors:0
>> TX bytes:1902 acl:0 sco:0 commands:72 errors:0
>> Features: 0xff 0xff 0x8f 0x78 0x18 0x18 0x00 0x80
>> Packet type: DM1 DH1 HV1
>> Link policy: RSWITCH HOLD SNIFF PARK
>> Link mode: SLAVE ACCEPT
>> Name: 'delli-0'
>> Class: 0x000100
>> Service Classes: Unspecified
>> Device Class: Computer, Uncategorized
>> HCI Ver: 1.2 (0x2) HCI Rev: 0x4f2 LMP Ver: 1.2 (0x2) LMP Subver:
>> 0x4f2
>> Manufacturer: Cambridge Silicon Radio (10)
>>
>> "hcitools scan" or "hcitools inq" only show scanning but no device.
>>
>> Kernel versions tested where 2.6.8.1 and 2.6.10-rc3 and the following
>> debian packages
>>
>> ii bluez-firmware 1.0-2
>> ii bluez-hcidump 1.12-1
>> ii bluez-pcmcia-support 2.10-5
>> ii bluez-pin 0.24-1
>> ii bluez-utils 2.10-5
>>
>> dmesg:Bluetooth: Core ver 2.7
>> Bluetooth: HCI device and connection manager initialized
>> Bluetooth: HCI socket layer initialized
>> Bluetooth: HCI USB driver ver 2.7
>> Bluetooth: L2CAP ver 2.6
>> Bluetooth: L2CAP socket layer initialized
>> Bluetooth: RFCOMM ver 1.3
>> Bluetooth: RFCOMM socket layer initialized
>> Bluetooth: RFCOMM TTY layer initialized
>>
>> Tested also with --length=30, --flush
>>
>> System is a Dell 8600 and a Siemens S65 mobile.
>
> so this is the original firmware in the Bluetooth chip? You haven't
> flashed it? Is there a wireless switch on that machine? Maybe you need
> to activate the antenna.
>
> Please show us "/proc/bus/usb/devices" and what "hcidump -X" showing.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [Bluez-users] 'hciconfig -a' ok, but 'hcitools scan' shows no devices
2004-12-12 7:48 ` [Bluez-users] 'hciconfig -a' ok, but 'hcitools scan' " Andreas Schrell
@ 2004-12-12 8:06 ` Marcel Holtmann
2004-12-12 10:38 ` [Bluez-users] SOLVED: Dell Inspiron 8600 was: " Andreas Schrell
0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2004-12-12 8:06 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Andreas,
> And hcidump -X from "hciconfig -a" and "hcitool scan":
>
> HCIDump - HCI packet analyzer ver 1.12
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Read Local Name (0x03|0x0014) plen 0
> > HCI Event: Command Complete (0x0e) plen 252
> 0000: 01 14 0c 00 64 65 6c 6c 69 2d 30 00 00 00 00 00 ....delli-0.....
> 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> 00f0: 00 00 00 00 00 00 00 00 00 00 00 00 ............
> < HCI Command: Read Class of Device (0x03|0x0023) plen 0
> > HCI Event: Command Complete (0x0e) plen 7
> 0000: 01 23 0c 00 00 01 00 .#.....
> < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > HCI Event: Command Complete (0x0e) plen 12
> 0000: 01 01 10 00 02 f2 04 02 0a 00 f2 04 ............
> < HCI Command: Inquiry (0x01|0x0001) plen 5
> 0000: 33 8b 9e 08 64 3...d
> > HCI Event: Command Status (0x0f) plen 4
> 0000: 00 01 01 04 ....
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Vendor (0xff) plen 7
> CSR: VM (channel 13)
> 0000: 03 00 04 00 00 00 ......
> > HCI Event: Inquiry Complete (0x01) plen 1
> 0000: 00 .
this looks not good, because you shouldn't get any vendor events from
your Bluetooth chip. Is Bluetooth working for you under Windows?
> I can switch Bluetooth off and on. If I press the button I get
>
> < HCI Command: Reset (0x03|0x0003) plen 0
> Receive failed: Broken pipe
>
> and in syslog
>
> Dec 12 08:44:57 localhost kernel: atkbd.c: Unknown key pressed (translated
> set 2, code 0x88 on isa0060/serio0).
> Dec 12 08:44:57 localhost kernel: atkbd.c: Use 'setkeycodes e008
> <keycode>' to make it known.
> Dec 12 08:44:57 localhost kernel: usb 1-2: USB disconnect, address 6
> Dec 12 08:44:57 localhost hcid[9862]: HCI dev 0 down
> Dec 12 08:44:57 localhost hcid[9862]: Stoping security manager 0
> Dec 12 08:44:57 localhost hcid[9862]: HCI dev 0 unregistered
>
> next time I get
> Dec 12 08:46:06 localhost hcid[9862]: HCI dev 0 up
> Dec 12 08:46:06 localhost hcid[9862]: Starting security manager 0
> Dec 12 08:46:09 localhost usb.agent[25983]: hci_usb: already loaded
> Dec 12 08:46:09 localhost usb.agent[25988]: hci_usb: already loaded
> Dec 12 08:46:09 localhost usb.agent[25993]: hci_usb: already loaded
>
> Look ok for me.
This is exactly how it should be. The complete Bluetooth module is
physically connected/disconnected from the USB bus.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Bluez-users] SOLVED: Dell Inspiron 8600 was: 'hciconfig -a' ok, but 'hcitools scan' shows no devices
2004-12-12 8:06 ` Marcel Holtmann
@ 2004-12-12 10:38 ` Andreas Schrell
2004-12-12 11:42 ` Marcel Holtmann
0 siblings, 1 reply; 11+ messages in thread
From: Andreas Schrell @ 2004-12-12 10:38 UTC (permalink / raw)
To: bluez-users
Marcel,
thanks a lot for your help.
SUMMARY:
hciconfig -a looked right
hcitool scan did not show any devices
RESOLUTION:
Bluetooth was diabled under Windows!
There was no way to start it from Linux as far as I know.
After booting Windows and activation Bluetooth (right click on icon in
task bar, then activate) it works under Linux. Nothing to do with <FN-F2>.
Now the blue Bluetooth LED is on even on Linux startup.
Thank You, Marcel, for your help!
Andreas
> Hi Andreas,
>
>> And hcidump -X from "hciconfig -a" and "hcitool scan":
>>
>> HCIDump - HCI packet analyzer ver 1.12
>> device: hci0 snap_len: 1028 filter: 0xffffffff
>> < HCI Command: Read Local Name (0x03|0x0014) plen 0
>> > HCI Event: Command Complete (0x0e) plen 252
>> 0000: 01 14 0c 00 64 65 6c 6c 69 2d 30 00 00 00 00 00
>> ....delli-0.....
>> 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> ................
>> 00f0: 00 00 00 00 00 00 00 00 00 00 00 00 ............
>> < HCI Command: Read Class of Device (0x03|0x0023) plen 0
>> > HCI Event: Command Complete (0x0e) plen 7
>> 0000: 01 23 0c 00 00 01 00 .#.....
>> < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
>> > HCI Event: Command Complete (0x0e) plen 12
>> 0000: 01 01 10 00 02 f2 04 02 0a 00 f2 04 ............
>> < HCI Command: Inquiry (0x01|0x0001) plen 5
>> 0000: 33 8b 9e 08 64 3...d
>> > HCI Event: Command Status (0x0f) plen 4
>> 0000: 00 01 01 04 ....
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Vendor (0xff) plen 7
>> CSR: VM (channel 13)
>> 0000: 03 00 04 00 00 00 ......
>> > HCI Event: Inquiry Complete (0x01) plen 1
>> 0000: 00 .
>
> this looks not good, because you shouldn't get any vendor events from
> your Bluetooth chip. Is Bluetooth working for you under Windows?
>
>> I can switch Bluetooth off and on. If I press the button I get
>>
>> < HCI Command: Reset (0x03|0x0003) plen 0
>> Receive failed: Broken pipe
>>
>> and in syslog
>>
>> Dec 12 08:44:57 localhost kernel: atkbd.c: Unknown key pressed
>> (translated
>> set 2, code 0x88 on isa0060/serio0).
>> Dec 12 08:44:57 localhost kernel: atkbd.c: Use 'setkeycodes e008
>> <keycode>' to make it known.
>> Dec 12 08:44:57 localhost kernel: usb 1-2: USB disconnect, address 6
>> Dec 12 08:44:57 localhost hcid[9862]: HCI dev 0 down
>> Dec 12 08:44:57 localhost hcid[9862]: Stoping security manager 0
>> Dec 12 08:44:57 localhost hcid[9862]: HCI dev 0 unregistered
>>
>> next time I get
>> Dec 12 08:46:06 localhost hcid[9862]: HCI dev 0 up
>> Dec 12 08:46:06 localhost hcid[9862]: Starting security manager 0
>> Dec 12 08:46:09 localhost usb.agent[25983]: hci_usb: already loaded
>> Dec 12 08:46:09 localhost usb.agent[25988]: hci_usb: already loaded
>> Dec 12 08:46:09 localhost usb.agent[25993]: hci_usb: already loaded
>>
>> Look ok for me.
>
> This is exactly how it should be. The complete Bluetooth module is
> physically connected/disconnected from the USB bus.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] SOLVED: Dell Inspiron 8600 was: 'hciconfig -a' ok, but 'hcitools scan' shows no devices
2004-12-12 10:38 ` [Bluez-users] SOLVED: Dell Inspiron 8600 was: " Andreas Schrell
@ 2004-12-12 11:42 ` Marcel Holtmann
2004-12-13 17:17 ` Andreas Schrell
0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2004-12-12 11:42 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Andreas,
> thanks a lot for your help.
>
> SUMMARY:
>
> hciconfig -a looked right
> hcitool scan did not show any devices
>
> RESOLUTION:
>
> Bluetooth was diabled under Windows!
> There was no way to start it from Linux as far as I know.
>
> After booting Windows and activation Bluetooth (right click on icon in
> task bar, then activate) it works under Linux. Nothing to do with <FN-F2>.
> Now the blue Bluetooth LED is on even on Linux startup.
do you still get vendor event with hcidump?
Maybe they have a special VM application running on the Bluetooth chip
that can enable/disable the antenna or whatever. What Windows stack did
you used?
> Thank You, Marcel, for your help!
You are welcome.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] SOLVED: Dell Inspiron 8600 was: 'hciconfig -a' ok, but 'hcitools scan' shows no devices
2004-12-12 11:42 ` Marcel Holtmann
@ 2004-12-13 17:17 ` Andreas Schrell
2004-12-13 20:01 ` Marcel Holtmann
0 siblings, 1 reply; 11+ messages in thread
From: Andreas Schrell @ 2004-12-13 17:17 UTC (permalink / raw)
To: bluez-users
Marcel,
here is the actual dump from "hcitool scan":
delli:~# hcidump -a
HCIDump - HCI packet analyzer ver 1.12
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Inquiry (0x01|0x0001) plen 5
3 . . . d
> HCI Event: Command Status (0x0f) plen 4
. . . .
> HCI Event: Inquiry Result (0x02) plen 15
. . . C . . . . . . . . r H .
> HCI Event: Inquiry Complete (0x01) plen 1
.
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
. . C . . . . . . .
> HCI Event: Command Status (0x0f) plen 4
. . . .
> HCI Event: Remote Name Req Complete (0x07) plen 255
. . . C . . . A . S c h r e l l . S 6 5
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
On Windows I used the preinstalled Windows XP with the Bluetooth
applications from dell I think. Notebook is normally only used under
Linux. But if you give me some instruction where to look under Windows - I
can give you appnames and version info etc.
Andreas
> Hi Andreas,
>
>> thanks a lot for your help.
>>
>> SUMMARY:
>>
>> hciconfig -a looked right
>> hcitool scan did not show any devices
>>
>> RESOLUTION:
>>
>> Bluetooth was diabled under Windows!
>> There was no way to start it from Linux as far as I know.
>>
>> After booting Windows and activation Bluetooth (right click on icon in
>> task bar, then activate) it works under Linux. Nothing to do with
>> <FN-F2>.
>> Now the blue Bluetooth LED is on even on Linux startup.
>
> do you still get vendor event with hcidump?
>
> Maybe they have a special VM application running on the Bluetooth chip
> that can enable/disable the antenna or whatever. What Windows stack did
> you used?
>
>> Thank You, Marcel, for your help!
>
> You are welcome.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] SOLVED: Dell Inspiron 8600 was: 'hciconfig -a' ok, but 'hcitools scan' shows no devices
2004-12-13 17:17 ` Andreas Schrell
@ 2004-12-13 20:01 ` Marcel Holtmann
2004-12-14 9:36 ` Andreas Schrell
0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2004-12-13 20:01 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Andreas,
> here is the actual dump from "hcitool scan":
>
> delli:~# hcidump -a
> HCIDump - HCI packet analyzer ver 1.12
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Inquiry (0x01|0x0001) plen 5
> 3 . . . d
> > HCI Event: Command Status (0x0f) plen 4
> . . . .
> > HCI Event: Inquiry Result (0x02) plen 15
> . . . C . . . . . . . . r H .
> > HCI Event: Inquiry Complete (0x01) plen 1
> .
> < HCI Command: Remote Name Request (0x01|0x0019) plen 10
> . . C . . . . . . .
> > HCI Event: Command Status (0x0f) plen 4
> . . . .
> > HCI Event: Remote Name Req Complete (0x07) plen 255
> . . . C . . . A . S c h r e l l . S 6 5
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . . . . . . .
> . . . . . . . . . . . . . . .
>
> On Windows I used the preinstalled Windows XP with the Bluetooth
> applications from dell I think. Notebook is normally only used under
> Linux. But if you give me some instruction where to look under Windows - I
> can give you appnames and version info etc.
was this the first time you used Windows on that machine? Maybe your
Bluetooth module was in an undefined state and the Windows stack send
the HCI Reset (which we don't send normally) do reset it. However what
do I know about the Windows operating system ;)
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] SOLVED: Dell Inspiron 8600 was: 'hciconfig -a' ok, but 'hcitools scan' shows no devices
2004-12-13 20:01 ` Marcel Holtmann
@ 2004-12-14 9:36 ` Andreas Schrell
2004-12-14 9:56 ` Marcel Holtmann
0 siblings, 1 reply; 11+ messages in thread
From: Andreas Schrell @ 2004-12-14 9:36 UTC (permalink / raw)
To: bluez-users
Marcel,
no I used Windows sometimes. And as far as I rember I disabled the
Bluetooth in the taskbar. Perhaps some Dell-specific code. Is there a
Windows tool like hcidump? Maybe I can trace what happens when disabling
or enabling it under Win.
Andreas
> Hi Andreas,
>
>> here is the actual dump from "hcitool scan":
>>
>> delli:~# hcidump -a
>> HCIDump - HCI packet analyzer ver 1.12
>> device: hci0 snap_len: 1028 filter: 0xffffffff
>> < HCI Command: Inquiry (0x01|0x0001) plen 5
>> 3 . . . d
>> > HCI Event: Command Status (0x0f) plen 4
>> . . . .
>> > HCI Event: Inquiry Result (0x02) plen 15
>> . . . C . . . . . . . . r H .
>> > HCI Event: Inquiry Complete (0x01) plen 1
>> .
>> < HCI Command: Remote Name Request (0x01|0x0019) plen 10
>> . . C . . . . . . .
>> > HCI Event: Command Status (0x0f) plen 4
>> . . . .
>> > HCI Event: Remote Name Req Complete (0x07) plen 255
>> . . . C . . . A . S c h r e l l . S 6 5
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . . . . . . .
>> . . . . . . . . . . . . . . .
>>
>> On Windows I used the preinstalled Windows XP with the Bluetooth
>> applications from dell I think. Notebook is normally only used under
>> Linux. But if you give me some instruction where to look under Windows -
>> I
>> can give you appnames and version info etc.
>
> was this the first time you used Windows on that machine? Maybe your
> Bluetooth module was in an undefined state and the Windows stack send
> the HCI Reset (which we don't send normally) do reset it. However what
> do I know about the Windows operating system ;)
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] SOLVED: Dell Inspiron 8600 was: 'hciconfig -a' ok, but 'hcitools scan' shows no devices
2004-12-14 9:36 ` Andreas Schrell
@ 2004-12-14 9:56 ` Marcel Holtmann
2004-12-14 21:23 ` Andreas Schrell
0 siblings, 1 reply; 11+ messages in thread
From: Marcel Holtmann @ 2004-12-14 9:56 UTC (permalink / raw)
To: BlueZ Mailing List
Hi Andreas,
> no I used Windows sometimes. And as far as I rember I disabled the
> Bluetooth in the taskbar. Perhaps some Dell-specific code. Is there a
> Windows tool like hcidump? Maybe I can trace what happens when disabling
> or enabling it under Win.
if it is the Widcomm stack then you have something like SpyLite or so,
but the Microsoft stack I don't know. However USBsnoopy can also do the
job.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Bluez-users] SOLVED: Dell Inspiron 8600 was: 'hciconfig -a' ok, but 'hcitools scan' shows no devices
2004-12-14 9:56 ` Marcel Holtmann
@ 2004-12-14 21:23 ` Andreas Schrell
0 siblings, 0 replies; 11+ messages in thread
From: Andreas Schrell @ 2004-12-14 21:23 UTC (permalink / raw)
To: bluez-users
Hi Marcel,
tried it with USB snoopy but didn't get it to work. The Windows Programs can
distinguish between switching off from command tray and <FN><F2>. Both
must be switched on, from command tray under Windows. <FN><F2> works from
Windows and from Linux also. I can live with this solution.
Thank you
Andreas
> Hi Andreas,
>
>> no I used Windows sometimes. And as far as I rember I disabled the
>> Bluetooth in the taskbar. Perhaps some Dell-specific code. Is there a
>> Windows tool like hcidump? Maybe I can trace what happens when disabling
>> or enabling it under Win.
>
> if it is the Widcomm stack then you have something like SpyLite or so,
> but the Microsoft stack I don't know. However USBsnoopy can also do the
> job.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2004-12-14 21:23 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-12-11 22:07 [Bluez-users] "hciconfig -a" ok, but "hcitools scan" shows no devices Andreas Schrell
2004-12-11 22:41 ` Marcel Holtmann
2004-12-12 7:48 ` [Bluez-users] 'hciconfig -a' ok, but 'hcitools scan' " Andreas Schrell
2004-12-12 8:06 ` Marcel Holtmann
2004-12-12 10:38 ` [Bluez-users] SOLVED: Dell Inspiron 8600 was: " Andreas Schrell
2004-12-12 11:42 ` Marcel Holtmann
2004-12-13 17:17 ` Andreas Schrell
2004-12-13 20:01 ` Marcel Holtmann
2004-12-14 9:36 ` Andreas Schrell
2004-12-14 9:56 ` Marcel Holtmann
2004-12-14 21:23 ` Andreas Schrell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox