[PATCH v2 0/3] Bluetooth: Add btrealtek data struct and improve SCO sound quality of RTK chips

[PATCH v2 0/3] Bluetooth: Add btrealtek data struct and improve SCO sound quality of RTK chips

[hildawu]

From: Hilda Wu <hildawu@realtek.com>

Add btrealtek data struct and use definition of vendor flags to manage
the specific chip.
The Bluetooth: btusb: Workaround for spotty SCO quality patch is for
filter out duplicate packet for avoiding spotty SCO quality.
The Bluetooth: btsub: Ignore zero length of USB packets on ALT 6 patch
is for some Realtek chips need to transmit mSBC data continuously
without the zero length of USB packets.

---
Changes in v2:
 - Set the proper priv_size to hci_alloc_dev_priv().
 - Separate commits for functions.
---
Thank you for your review and suggestions.

Hilda Wu (3):
  Bluetooth: btrtl: Add btrealtek data struct
  Bluetooth: btusb: Workaround for spotty SCO quality
  Bluetooth: btsub: Ignore zero length of USB packets on ALT 6 for the
    specific chip model of Realtek devices

 drivers/bluetooth/btrtl.c | 35 +++++++++++++++++++++++++++++++++++
 drivers/bluetooth/btrtl.h | 30 ++++++++++++++++++++++++++++++
 drivers/bluetooth/btusb.c | 31 ++++++++++++++++++++++++++++++-
 3 files changed, 95 insertions(+), 1 deletion(-)

-- 
2.17.1

[PATCH v2 1/3] Bluetooth: btrtl: Add btrealtek data struct

[hildawu]

From: Hilda Wu <hildawu@realtek.com>

This patch adds a data structure for btrealtek object, and the
definition of vendor behavior flags. It also adds macros to set/test/get
the flags.

Signed-off-by: Hilda Wu <hildawu@realtek.com>
---
Changes in v2:
 - Set the proper priv_size to hci_alloc_dev_priv().
 - Separate commits for functions.
---
---
 drivers/bluetooth/btrtl.h | 22 ++++++++++++++++++++++
 drivers/bluetooth/btusb.c |  3 +++
 2 files changed, 25 insertions(+)

diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
index 2c441bda390a..e2c99684799a 100644
--- a/drivers/bluetooth/btrtl.h
+++ b/drivers/bluetooth/btrtl.h
@@ -47,6 +47,28 @@ struct rtl_vendor_config {
 	struct rtl_vendor_config_entry entry[];
 } __packed;
 
+enum {
+	REALTEK_WBS_FILTER,
+	REALTEK_ALT6_CONTINUOUS_TX_CHIP,
+
+	__REALTEK_NUM_FLAGS,
+};
+
+struct btrealtek_data {
+	DECLARE_BITMAP(flags, __REALTEK_NUM_FLAGS);
+};
+
+#define btrealtek_set_flag(hdev, nr)					\
+	do {								\
+		struct btrealtek_data *realtek = hci_get_priv((hdev));	\
+		set_bit((nr), realtek->flags);				\
+	} while (0)
+
+#define btrealtek_get_flag(hdev)					\
+	(((struct btrealtek_data *)hci_get_priv(hdev))->flags)
+
+#define btrealtek_test_flag(hdev, nr)	test_bit((nr), btrealtek_get_flag(hdev))
+
 #if IS_ENABLED(CONFIG_BT_RTL)
 
 struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c3daba17de7f..4c3aed89ff05 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3749,6 +3749,9 @@ static int btusb_probe(struct usb_interface *intf,
 		/* Override the rx handlers */
 		data->recv_event = btusb_recv_event_intel;
 		data->recv_bulk = btusb_recv_bulk_intel;
+	} else if (id->driver_info & BTUSB_REALTEK) {
+		/* Allocate extra space for Realtek device */
+		priv_size += sizeof(struct btrealtek_data);
 	}
 
 	data->recv_acl = hci_recv_frame;
-- 
2.17.1

RE: Bluetooth: Add btrealtek data struct and improve SCO sound quality of RTK chips

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 1539 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=676514

---Test result---

Test Summary:
CheckPatch                    PASS      5.12 seconds
GitLint                       FAIL      2.46 seconds
SubjectPrefix                 PASS      1.94 seconds
BuildKernel                   PASS      34.34 seconds
BuildKernel32                 PASS      30.14 seconds
Incremental Build with patchesPASS      56.77 seconds
TestRunner: Setup             PASS      501.76 seconds
TestRunner: l2cap-tester      PASS      16.63 seconds
TestRunner: iso-tester        PASS      15.66 seconds
TestRunner: bnep-tester       PASS      6.21 seconds
TestRunner: mgmt-tester       PASS      100.91 seconds
TestRunner: rfcomm-tester     PASS      9.78 seconds
TestRunner: sco-tester        PASS      9.30 seconds
TestRunner: smp-tester        PASS      9.38 seconds
TestRunner: userchan-tester   PASS      6.41 seconds

Details
##############################
Test: GitLint - FAIL - 2.46 seconds
Run gitlint with rule in .gitlint
[v2,3/3] Bluetooth: btsub: Ignore zero length of USB packets on ALT 6 for the specific chip model of Realtek devices
1: T1 Title exceeds max length (116>80): "[v2,3/3] Bluetooth: btsub: Ignore zero length of USB packets on ALT 6 for the specific chip model of Realtek devices"




---
Regards,
Linux Bluetooth

[PATCH v2 2/3] Bluetooth: btusb: Workaround for spotty SCO quality

[hildawu]

From: Hilda Wu <hildawu@realtek.com>

When streaming HFP, once a few minutes a brief pause in audio can be
heard on some platform with Realtek Bluetooth. When the issue occurs,
the system will see the SCO packet for unknown connection handle messages.

Note: This issue affects (e)SCO only, does not affect ACLs.
Because the duplicate packet causing the problem only occurs in Realtek BT.
This is to filter out duplicate packet for avoiding influence.

Signed-off-by: Hilda Wu <hildawu@realtek.com>
---
Changes in v2:
 - Seperate commits for functions
---
---
 drivers/bluetooth/btrtl.c | 28 ++++++++++++++++++++++++++++
 drivers/bluetooth/btrtl.h |  8 ++++++++
 drivers/bluetooth/btusb.c | 14 ++++++++++++++
 3 files changed, 50 insertions(+)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index fb52313a1d45..15223b3ed94d 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -781,6 +781,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 	case CHIP_ID_8852C:
 		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+		btrealtek_set_flag(hdev, REALTEK_WBS_FILTER);
 		hci_set_aosp_capable(hdev);
 		break;
 	default:
@@ -937,6 +938,33 @@ int btrtl_get_uart_settings(struct hci_dev *hdev,
 }
 EXPORT_SYMBOL_GPL(btrtl_get_uart_settings);
 
+int btrtl_usb_recv_isoc(u16 pos, u8 *data, u8 *p, int len,
+			u16 wMaxPacketSize)
+{
+	u8 *prev;
+
+	if (pos >= HCI_SCO_HDR_SIZE && pos >= wMaxPacketSize &&
+	    len == wMaxPacketSize && !(pos % wMaxPacketSize) &&
+	    wMaxPacketSize >= 10 && p[0] == data[0] && p[1] == data[1]) {
+		prev = data + (pos - wMaxPacketSize);
+
+		/* Detect the sco data of usb isoc pkt duplication. */
+		if (!memcmp(p + 2, prev + 2, 8))
+			return -EILSEQ;
+
+		if (wMaxPacketSize >= 12 &&
+		    p[2] == prev[6] && p[3] == prev[7] &&
+		    p[4] == prev[4] && p[5] == prev[5] &&
+		    p[6] == prev[10] && p[7] == prev[11] &&
+		    p[8] == prev[8] && p[9] == prev[9]) {
+			return -EILSEQ;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btrtl_usb_recv_isoc);
+
 MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>");
 MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
index e2c99684799a..79e93a8b229f 100644
--- a/drivers/bluetooth/btrtl.h
+++ b/drivers/bluetooth/btrtl.h
@@ -84,6 +84,8 @@ int btrtl_get_uart_settings(struct hci_dev *hdev,
 			    struct btrtl_device_info *btrtl_dev,
 			    unsigned int *controller_baudrate,
 			    u32 *device_baudrate, bool *flow_control);
+int btrtl_usb_recv_isoc(u16 pos, u8 *data, u8 *buffer, int len,
+				u16 wMaxPacketSize);
 
 #else
 
@@ -127,4 +129,10 @@ static inline int btrtl_get_uart_settings(struct hci_dev *hdev,
 	return -ENOENT;
 }
 
+static inline int btrtl_usb_recv_isoc(u16 pos, u8 *data, u8 *buffer, int len,
+				  u16 wMaxPacketSize)
+{
+	return -EOPNOTSUPP;
+}
+
 #endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 4c3aed89ff05..8e595e03655a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -961,6 +961,7 @@ static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
 	struct sk_buff *skb;
 	unsigned long flags;
 	int err = 0;
+	u16 wMaxPacketSize = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize);
 
 	spin_lock_irqsave(&data->rxlock, flags);
 	skb = data->sco_skb;
@@ -980,6 +981,19 @@ static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
 		}
 
 		len = min_t(uint, hci_skb_expect(skb), count);
+
+		/* Gaps in audio could be heard while streaming WBS using USB
+		 * alt settings 3 on some platforms, since this is only used
+		 * with RTK chips so let vendor function detect it.
+		 */
+		if (test_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags) &&
+			btrealtek_test_flag(data->hdev, REALTEK_WBS_FILTER)) {
+			err = btrtl_usb_recv_isoc(skb->len, skb->data, buffer,
+							len, wMaxPacketSize);
+			if (err)
+				break;
+		}
+
 		skb_put_data(skb, buffer, len);
 
 		count -= len;
-- 
2.17.1

Re: [PATCH v2 2/3] Bluetooth: btusb: Workaround for spotty SCO quality

[Luiz Augusto von Dentz]

Hi Hilda,

On Tue, Sep 13, 2022 at 3:02 AM <hildawu@realtek.com> wrote:
>
> From: Hilda Wu <hildawu@realtek.com>
>
> When streaming HFP, once a few minutes a brief pause in audio can be
> heard on some platform with Realtek Bluetooth. When the issue occurs,
> the system will see the SCO packet for unknown connection handle messages.
>
> Note: This issue affects (e)SCO only, does not affect ACLs.
> Because the duplicate packet causing the problem only occurs in Realtek BT.
> This is to filter out duplicate packet for avoiding influence.
>
> Signed-off-by: Hilda Wu <hildawu@realtek.com>
> ---
> Changes in v2:
>  - Seperate commits for functions
> ---
> ---
>  drivers/bluetooth/btrtl.c | 28 ++++++++++++++++++++++++++++
>  drivers/bluetooth/btrtl.h |  8 ++++++++
>  drivers/bluetooth/btusb.c | 14 ++++++++++++++
>  3 files changed, 50 insertions(+)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index fb52313a1d45..15223b3ed94d 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -781,6 +781,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
>         case CHIP_ID_8852C:
>                 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
>                 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
> +               btrealtek_set_flag(hdev, REALTEK_WBS_FILTER);
>                 hci_set_aosp_capable(hdev);
>                 break;
>         default:
> @@ -937,6 +938,33 @@ int btrtl_get_uart_settings(struct hci_dev *hdev,
>  }
>  EXPORT_SYMBOL_GPL(btrtl_get_uart_settings);
>
> +int btrtl_usb_recv_isoc(u16 pos, u8 *data, u8 *p, int len,
> +                       u16 wMaxPacketSize)
> +{
> +       u8 *prev;
> +
> +       if (pos >= HCI_SCO_HDR_SIZE && pos >= wMaxPacketSize &&
> +           len == wMaxPacketSize && !(pos % wMaxPacketSize) &&
> +           wMaxPacketSize >= 10 && p[0] == data[0] && p[1] == data[1]) {
> +               prev = data + (pos - wMaxPacketSize);

Is this attempting to access before the skb-->data in case
wMaxPacketSize is bigger than pos? Anyway I'm not really following the
reasoning you are comparing the data like that, depending on the codec
there could be frames that match exactly but doesn't necessarily means
they are duplicated.

> +
> +               /* Detect the sco data of usb isoc pkt duplication. */
> +               if (!memcmp(p + 2, prev + 2, 8))
> +                       return -EILSEQ;
> +
> +               if (wMaxPacketSize >= 12 &&
> +                   p[2] == prev[6] && p[3] == prev[7] &&
> +                   p[4] == prev[4] && p[5] == prev[5] &&
> +                   p[6] == prev[10] && p[7] == prev[11] &&
> +                   p[8] == prev[8] && p[9] == prev[9]) {
> +                       return -EILSEQ;
> +               }
> +       }
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL_GPL(btrtl_usb_recv_isoc);
> +
>  MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>");
>  MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION);
>  MODULE_VERSION(VERSION);
> diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
> index e2c99684799a..79e93a8b229f 100644
> --- a/drivers/bluetooth/btrtl.h
> +++ b/drivers/bluetooth/btrtl.h
> @@ -84,6 +84,8 @@ int btrtl_get_uart_settings(struct hci_dev *hdev,
>                             struct btrtl_device_info *btrtl_dev,
>                             unsigned int *controller_baudrate,
>                             u32 *device_baudrate, bool *flow_control);
> +int btrtl_usb_recv_isoc(u16 pos, u8 *data, u8 *buffer, int len,
> +                               u16 wMaxPacketSize);
>
>  #else
>
> @@ -127,4 +129,10 @@ static inline int btrtl_get_uart_settings(struct hci_dev *hdev,
>         return -ENOENT;
>  }
>
> +static inline int btrtl_usb_recv_isoc(u16 pos, u8 *data, u8 *buffer, int len,
> +                                 u16 wMaxPacketSize)
> +{
> +       return -EOPNOTSUPP;
> +}
> +
>  #endif
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 4c3aed89ff05..8e595e03655a 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -961,6 +961,7 @@ static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
>         struct sk_buff *skb;
>         unsigned long flags;
>         int err = 0;
> +       u16 wMaxPacketSize = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize);
>
>         spin_lock_irqsave(&data->rxlock, flags);
>         skb = data->sco_skb;
> @@ -980,6 +981,19 @@ static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
>                 }
>
>                 len = min_t(uint, hci_skb_expect(skb), count);
> +
> +               /* Gaps in audio could be heard while streaming WBS using USB
> +                * alt settings 3 on some platforms, since this is only used
> +                * with RTK chips so let vendor function detect it.
> +                */
> +               if (test_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags) &&
> +                       btrealtek_test_flag(data->hdev, REALTEK_WBS_FILTER)) {
> +                       err = btrtl_usb_recv_isoc(skb->len, skb->data, buffer,
> +                                                       len, wMaxPacketSize);
> +                       if (err)
> +                               break;
> +               }

If we really need to do this then we need a way for vendors to replace
btus_recv_isoc with the vendor function.

>                 skb_put_data(skb, buffer, len);
>
>                 count -= len;
> --
> 2.17.1
>


-- 
Luiz Augusto von Dentz

[PATCH v2 3/3] Bluetooth: btsub: Ignore zero length of USB packets on ALT 6 for the specific chip model of Realtek devices

[hildawu]

From: Hilda Wu <hildawu@realtek.com>

For USB ALT 6 settings some Realtek chips need to transmit mSBC data
continuously without the zero length of USB packets.
In this commit, create BTUSB_ALT6_CONTINUOUS_TX to manage the workaround.
Therefore, create REALTEK_ALT6_CONTINUOUS_TX_CHIP to manage the specific
chip model for the workaround.

Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Hilda Wu <hildawu@realtek.com>
---
 drivers/bluetooth/btrtl.c |  7 +++++++
 drivers/bluetooth/btusb.c | 14 +++++++++++++-
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 15223b3ed94d..6d74175cd25f 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -782,6 +782,13 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
 		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
 		btrealtek_set_flag(hdev, REALTEK_WBS_FILTER);
+
+		/* RTL8852C needs to transmit mSBC data continuously without
+		 * the zero length of USB packets for the ALT 6 supported chips
+		 */
+		if (btrtl_dev->project_id == CHIP_ID_8852C)
+			btrealtek_set_flag(hdev, REALTEK_ALT6_CONTINUOUS_TX_CHIP);
+
 		hci_set_aosp_capable(hdev);
 		break;
 	default:
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8e595e03655a..50a21061350e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -626,6 +626,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
 #define BTUSB_TX_WAIT_VND_EVT	13
 #define BTUSB_WAKEUP_AUTOSUSPEND	14
 #define BTUSB_USE_ALT3_FOR_WBS	15
+#define BTUSB_ALT6_CONTINUOUS_TX	16
 
 struct btusb_data {
 	struct hci_dev       *hdev;
@@ -1284,11 +1285,18 @@ static void btusb_isoc_complete(struct urb *urb)
 static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len,
 					       int mtu, struct btusb_data *data)
 {
-	int i, offset = 0;
+	int i = 0, offset = 0;
 	unsigned int interval;
 
 	BT_DBG("len %d mtu %d", len, mtu);
 
+	/* For mSBC ALT 6 settings some Realtek chips need to transmit the data
+	 * continuously without the zero length of USB packets.
+	 */
+	if (test_bit(BTUSB_ALT6_CONTINUOUS_TX, &data->flags))
+		if (btrealtek_test_flag(data->hdev, REALTEK_ALT6_CONTINUOUS_TX_CHIP))
+			goto ignore_usb_alt6_packet_flow;
+
 	/* For mSBC ALT 6 setting the host will send the packet at continuous
 	 * flow. As per core spec 5, vol 4, part B, table 2.1. For ALT setting
 	 * 6 the HCI PACKET INTERVAL should be 7.5ms for every usb packets.
@@ -1308,6 +1316,7 @@ static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len,
 		urb->iso_frame_desc[i].length = offset;
 	}
 
+ignore_usb_alt6_packet_flow:
 	if (len && i < BTUSB_MAX_ISOC_FRAMES) {
 		urb->iso_frame_desc[i].offset = offset;
 		urb->iso_frame_desc[i].length = len;
@@ -3931,6 +3940,9 @@ static int btusb_probe(struct usb_interface *intf,
 		/* Realtek devices need to set remote wakeup on auto-suspend */
 		set_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags);
 		set_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags);
+
+		/* Some Realtek devices need to transmit mSBC data continuously */
+		set_bit(BTUSB_ALT6_CONTINUOUS_TX, &data->flags);
 	}
 
 	if (!reset)
-- 
2.17.1

[PATCH v3 1/3] Bluetooth: btrtl: Add btrealtek data struct

[hildawu]

From: Hilda Wu <hildawu@realtek.com>

This patch adds a data structure for btrealtek object, and the
definition of vendor behavior flags. It also adds macros to set/test/get
the flags.

Signed-off-by: Hilda Wu <hildawu@realtek.com>
---
Changes in v3:
 - Update private flag.

Changes in v2:
 - Set the proper priv_size to hci_alloc_dev_priv().
 - Separate commits for functions.
---
---
 drivers/bluetooth/btrtl.h | 21 +++++++++++++++++++++
 drivers/bluetooth/btusb.c |  3 +++
 2 files changed, 24 insertions(+)

diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
index 2c441bda390a..ebf0101c959b 100644
--- a/drivers/bluetooth/btrtl.h
+++ b/drivers/bluetooth/btrtl.h
@@ -47,6 +47,27 @@ struct rtl_vendor_config {
 	struct rtl_vendor_config_entry entry[];
 } __packed;
 
+enum {
+	REALTEK_ALT6_CONTINUOUS_TX_CHIP,
+
+	__REALTEK_NUM_FLAGS,
+};
+
+struct btrealtek_data {
+	DECLARE_BITMAP(flags, __REALTEK_NUM_FLAGS);
+};
+
+#define btrealtek_set_flag(hdev, nr)					\
+	do {								\
+		struct btrealtek_data *realtek = hci_get_priv((hdev));	\
+		set_bit((nr), realtek->flags);				\
+	} while (0)
+
+#define btrealtek_get_flag(hdev)					\
+	(((struct btrealtek_data *)hci_get_priv(hdev))->flags)
+
+#define btrealtek_test_flag(hdev, nr)	test_bit((nr), btrealtek_get_flag(hdev))
+
 #if IS_ENABLED(CONFIG_BT_RTL)
 
 struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c3daba17de7f..4c3aed89ff05 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3749,6 +3749,9 @@ static int btusb_probe(struct usb_interface *intf,
 		/* Override the rx handlers */
 		data->recv_event = btusb_recv_event_intel;
 		data->recv_bulk = btusb_recv_bulk_intel;
+	} else if (id->driver_info & BTUSB_REALTEK) {
+		/* Allocate extra space for Realtek device */
+		priv_size += sizeof(struct btrealtek_data);
 	}
 
 	data->recv_acl = hci_recv_frame;
-- 
2.17.1

RE: Bluetooth: Add btrealtek data struct and improve SCO sound quality of RTK chips

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 2148 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=681879

---Test result---

Test Summary:
CheckPatch                    PASS      4.94 seconds
GitLint                       FAIL      2.88 seconds
SubjectPrefix                 FAIL      1.93 seconds
BuildKernel                   PASS      44.62 seconds
BuildKernel32                 PASS      40.86 seconds
Incremental Build with patchesPASS      75.88 seconds
TestRunner: Setup             PASS      694.33 seconds
TestRunner: l2cap-tester      PASS      21.50 seconds
TestRunner: iso-tester        PASS      22.09 seconds
TestRunner: bnep-tester       PASS      8.42 seconds
TestRunner: mgmt-tester       PASS      137.38 seconds
TestRunner: rfcomm-tester     PASS      13.29 seconds
TestRunner: sco-tester        PASS      12.30 seconds
TestRunner: ioctl-tester      PASS      14.72 seconds
TestRunner: smp-tester        PASS      12.54 seconds
TestRunner: userchan-tester   PASS      9.03 seconds

Details
##############################
Test: GitLint - FAIL - 2.88 seconds
Run gitlint with rule in .gitlint
[v3,2/3] Bluetooth: btusb: Workaround for spotty SCO quality
18: B1 Line exceeds max length (85>80): " - Additional info: The comparison of btrtl_usb_recv_isoc here is for invalid handle,"
19: B1 Line exceeds max length (91>80): "   the invalid handle shouldn't appear. So we try to find out the rule and filter out this."

[v3,3/3] Bluetooth:btsub:Ignore zero length of USB packets on ALT 6 for specific chip
1: T1 Title exceeds max length (85>80): "[v3,3/3] Bluetooth:btsub:Ignore zero length of USB packets on ALT 6 for specific chip"
15: B1 Line exceeds max length (86>80): " - For ignore_usb_alt6_packet_flow, manage the common flag by the vendor private flag."


##############################
Test: SubjectPrefix - FAIL - 1.93 seconds
Check subject contains "Bluetooth" prefix
"Bluetooth: " is not specified in the subject



---
Regards,
Linux Bluetooth

[PATCH v4 1/2] Bluetooth: btrtl: Add btrealtek data struct

[hildawu]

From: Hilda Wu <hildawu@realtek.com>

This patch adds a data structure for btrealtek object, and the
definition of vendor behavior flags. It also adds macros to set/test/get
the flags.

Signed-off-by: Hilda Wu <hildawu@realtek.com>
---
Changes in v4:
 - Since the original 0002 patch has no dependency with this 0001 patch.
   So let the 0002 patch submit another.

Changes in v3:
 - Update private flag.

Changes in v2:
 - Set the proper priv_size to hci_alloc_dev_priv().
 - Separate commits for functions.
---
---
 drivers/bluetooth/btrtl.h | 21 +++++++++++++++++++++
 drivers/bluetooth/btusb.c |  3 +++
 2 files changed, 24 insertions(+)

diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
index 2c441bda390a..ebf0101c959b 100644
--- a/drivers/bluetooth/btrtl.h
+++ b/drivers/bluetooth/btrtl.h
@@ -47,6 +47,27 @@ struct rtl_vendor_config {
 	struct rtl_vendor_config_entry entry[];
 } __packed;
 
+enum {
+	REALTEK_ALT6_CONTINUOUS_TX_CHIP,
+
+	__REALTEK_NUM_FLAGS,
+};
+
+struct btrealtek_data {
+	DECLARE_BITMAP(flags, __REALTEK_NUM_FLAGS);
+};
+
+#define btrealtek_set_flag(hdev, nr)					\
+	do {								\
+		struct btrealtek_data *realtek = hci_get_priv((hdev));	\
+		set_bit((nr), realtek->flags);				\
+	} while (0)
+
+#define btrealtek_get_flag(hdev)					\
+	(((struct btrealtek_data *)hci_get_priv(hdev))->flags)
+
+#define btrealtek_test_flag(hdev, nr)	test_bit((nr), btrealtek_get_flag(hdev))
+
 #if IS_ENABLED(CONFIG_BT_RTL)
 
 struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 271963805a38..4243936c0583 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3755,6 +3755,9 @@ static int btusb_probe(struct usb_interface *intf,
 		/* Override the rx handlers */
 		data->recv_event = btusb_recv_event_intel;
 		data->recv_bulk = btusb_recv_bulk_intel;
+	} else if (id->driver_info & BTUSB_REALTEK) {
+		/* Allocate extra space for Realtek device */
+		priv_size += sizeof(struct btrealtek_data);
 	}
 
 	data->recv_acl = hci_recv_frame;
-- 
2.17.1

RE: Bluetooth: Add btrealtek data struct and improve SCO sound quality of RTK chips

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 1537 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=683169

---Test result---

Test Summary:
CheckPatch                    PASS      3.08 seconds
GitLint                       FAIL      1.68 seconds
SubjectPrefix                 PASS      1.21 seconds
BuildKernel                   PASS      39.08 seconds
BuildKernel32                 PASS      35.06 seconds
Incremental Build with patchesPASS      58.68 seconds
TestRunner: Setup             PASS      581.82 seconds
TestRunner: l2cap-tester      PASS      19.08 seconds
TestRunner: iso-tester        PASS      19.65 seconds
TestRunner: bnep-tester       PASS      7.43 seconds
TestRunner: mgmt-tester       PASS      118.61 seconds
TestRunner: rfcomm-tester     PASS      11.81 seconds
TestRunner: sco-tester        PASS      10.97 seconds
TestRunner: ioctl-tester      PASS      12.64 seconds
TestRunner: smp-tester        PASS      10.99 seconds
TestRunner: userchan-tester   PASS      7.79 seconds

Details
##############################
Test: GitLint - FAIL - 1.68 seconds
Run gitlint with rule in .gitlint
[v4,2/2] Bluetooth: btusb: Ignore zero length of USB packets on ALT 6 for specific chip
1: T1 Title exceeds max length (87>80): "[v4,2/2] Bluetooth: btusb: Ignore zero length of USB packets on ALT 6 for specific chip"




---
Regards,
Linux Bluetooth