* Re: [PATCH v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922
2026-04-24 12:09 [PATCH v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922 zhangchen200426
@ 2026-04-24 12:29 ` Paul Menzel
2026-04-24 12:30 ` Paul Menzel
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Paul Menzel @ 2026-04-24 12:29 UTC (permalink / raw)
To: Chen Zhang
Cc: luiz.von.dentz, chris.lu, floss, sean.wang, en-wei.wu, Zijun.Hu,
chharry, ceggers, johan, linux-bluetooth, Chen Zhang
Dear Chen,
Thank you for your patch.
Am 24.04.26 um 14:09 schrieb zhangchen200426@163.com:
> From: Chen Zhang <zhangchen01@kylinos.cn>
>
> Add the vendor/product ID (0x0bda, 0xd922) to usb_device_id table for
> Realtek RTL8922AE.
>
> The device info from /sys/kernel/debug/usb/devices as below.
>
> T: Bus=10 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0bda ProdID=d922 Rev= 0.00
> S: Manufacturer=Realtek
> S: Product=Bluetooth Radio
> S: SerialNumber=00E04C885A01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
>
> Signed-off-by: Chen Zhang <zhangchen01@kylinos.cn>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index a0a7da498466..d84faad07dd7 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -601,6 +601,8 @@ static const struct usb_device_id quirks_table[] = {
> /* Realtek 8922AE Bluetooth devices */
> { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
> BTUSB_WIDEBAND_SPEECH },
> + { USB_DEVICE(0x0bda, 0xd922), .driver_info = BTUSB_REALTEK |
> + BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK |
> BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK |
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Kind regards,
Paul
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922
2026-04-24 12:09 [PATCH v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922 zhangchen200426
2026-04-24 12:29 ` Paul Menzel
@ 2026-04-24 12:30 ` Paul Menzel
2026-04-24 13:17 ` [v2] " bluez.test.bot
2026-04-24 18:50 ` [PATCH v2] " patchwork-bot+bluetooth
3 siblings, 0 replies; 5+ messages in thread
From: Paul Menzel @ 2026-04-24 12:30 UTC (permalink / raw)
To: Chen Zhang
Cc: luiz.von.dentz, chris.lu, floss, sean.wang, Zijun.Hu, chharry,
ceggers, johan, linux-bluetooth, Chen Zhang
Dear Chen,
Thank you for your patch.
Am 24.04.26 um 14:09 schrieb zhangchen200426@163.com:
> From: Chen Zhang <zhangchen01@kylinos.cn>
>
> Add the vendor/product ID (0x0bda, 0xd922) to usb_device_id table for
> Realtek RTL8922AE.
>
> The device info from /sys/kernel/debug/usb/devices as below.
>
> T: Bus=10 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0bda ProdID=d922 Rev= 0.00
> S: Manufacturer=Realtek
> S: Product=Bluetooth Radio
> S: SerialNumber=00E04C885A01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
>
> Signed-off-by: Chen Zhang <zhangchen01@kylinos.cn>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index a0a7da498466..d84faad07dd7 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -601,6 +601,8 @@ static const struct usb_device_id quirks_table[] = {
> /* Realtek 8922AE Bluetooth devices */
> { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
> BTUSB_WIDEBAND_SPEECH },
> + { USB_DEVICE(0x0bda, 0xd922), .driver_info = BTUSB_REALTEK |
> + BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK |
> BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK |
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Kind regards,
Paul
PS: I removed one bouncing address:
<en-wei.wu@canonical.com>: host mx.canonical.com[185.125.188.69] said: 550
5.1.1 <en-wei.wu@canonical.com>: Recipient address rejected: User
unknown
in relay recipient table (in reply to RCPT TO command)
^ permalink raw reply [flat|nested] 5+ messages in thread* RE: [v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922
2026-04-24 12:09 [PATCH v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922 zhangchen200426
2026-04-24 12:29 ` Paul Menzel
2026-04-24 12:30 ` Paul Menzel
@ 2026-04-24 13:17 ` bluez.test.bot
2026-04-24 18:50 ` [PATCH v2] " patchwork-bot+bluetooth
3 siblings, 0 replies; 5+ messages in thread
From: bluez.test.bot @ 2026-04-24 13:17 UTC (permalink / raw)
To: linux-bluetooth, zhangchen200426
[-- Attachment #1: Type: text/plain, Size: 1576 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1085181
---Test result---
Test Summary:
CheckPatch FAIL 0.59 seconds
GitLint PASS 0.24 seconds
SubjectPrefix PASS 0.46 seconds
BuildKernel PASS 26.51 seconds
CheckAllWarning PASS 29.15 seconds
CheckSparse PASS 27.73 seconds
BuildKernel32 PASS 25.47 seconds
TestRunnerSetup PASS 572.86 seconds
IncrementalBuild PASS 24.70 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922
WARNING: Duplicate signature
#116:
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
total: 0 errors, 1 warnings, 8 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/patch/14537778.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
https://github.com/bluez/bluetooth-next/pull/120
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922
2026-04-24 12:09 [PATCH v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922 zhangchen200426
` (2 preceding siblings ...)
2026-04-24 13:17 ` [v2] " bluez.test.bot
@ 2026-04-24 18:50 ` patchwork-bot+bluetooth
3 siblings, 0 replies; 5+ messages in thread
From: patchwork-bot+bluetooth @ 2026-04-24 18:50 UTC (permalink / raw)
To: chen zhang
Cc: luiz.von.dentz, chris.lu, pmenzel, floss, sean.wang, en-wei.wu,
Zijun.Hu, chharry, ceggers, johan, linux-bluetooth, zhangchen01
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Fri, 24 Apr 2026 20:09:28 +0800 you wrote:
> From: Chen Zhang <zhangchen01@kylinos.cn>
>
> Add the vendor/product ID (0x0bda, 0xd922) to usb_device_id table for
> Realtek RTL8922AE.
>
> The device info from /sys/kernel/debug/usb/devices as below.
>
> [...]
Here is the summary with links:
- [v2] Bluetooth: btusb: Add Realtek RTL8922AE VID/PID 0bda/d922
https://git.kernel.org/bluetooth/bluetooth-next/c/0cbf9408fe30
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 5+ messages in thread