From: Embedded System <embed.sys@gmail.com>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] Can't init device hci0 (all information included), help! Thanx a lot!!!
Date: Tue, 25 Jan 2005 23:23:55 +0800 [thread overview]
Message-ID: <c93f2a2905012507235443cd88@mail.gmail.com> (raw)
In-Reply-To: <1106569329.9269.67.camel@pegasus>
hi, Marcel
All the following bluez & patches (I only tried these) testings are
ok. Here with my results:
*1, 2.4.20-8 redhat 9 bluez-libs-2.3-3 / bluez-utils-2.2-3 (from
redhat 9.0)
*2, 2.4.22-mh7 redhat 9 bluez-libs-2.3-3 / bluez-utils-2.2-3 (from redhat 9.0)
*3, 2.4.28-mh7 redhat 9 bluez-libs-2.3-3 / bluez-utils-2.2-3 (from redhat 9.0)
*4, 2.4.28-mh7 redhat 9 bluez-libs-2.8.1 / bluez-utils-2.8.1 (from bluez.org )
*5, 2.4.28-mh7 redhat 9 bluez-libs-2.14 / bluez-utils-2.14 (from bluez.org )
It seems Vmware 5.0 beta is the problem.
All the best,
Guangkun
On Mon, 24 Jan 2005 13:22:09 +0100, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi Andy,
>
> > I have reinstalled Vmware (change from 5.0 beta to 4.5.2) and Red Hat
> > 9 (use default bluez-lib-2.3-3 and bluez-util-2.2-3) just now, it
> > WORKS now, at least everything looks fine so far, I can l2ping the
> > device (Nokia 7650) properly.
> >
> > Below is the hciconfig -a output of my usb doggle, you can check it
> > whether it's supported by lastest bluez package.
> >
> > hci0: Type: USB
> > BD Address: 00:10:60:A3:83:0E ACL MTU: 192:8 SCO MTU: 64:8
> > UP RUNNING PSCAN ISCAN
> > RX bytes:1132 acl:2 sco:0 events:44 errors:0
> > TX bytes:423 acl:2 sco:0 commands:26 errors:0
> > Features: 0xff 0xff 0x0f 0x00
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > Link policy: HOLD SNIFF PARK
> > Link mode: SLAVE ACCEPT
> > Name: 'BlueZ (0)'
> > Class: 0x000100
> > Service Classes: Unspecified
> > Device Class: Computer, Uncategorized
> > HCI Ver: 1.1 (0x1) HCI Rev: 0x1e7 LMP Ver: 1.1 (0x1) LMP Subver: 0x1e7
> > Manufacturer: Cambridge Silicon Radio (10)
> >
> > I will try new kernel later, and tell you the outcome. Btw, I noticed
> > that many people talked 'ep0in timed out' problem, maybe it's
> > something wrong with latest usb subsystem?
>
> the bluez-{libs|utils} can't be the problem here. It is the VMware or
> maybe the USB subsystem. Keep testing and try to find the wrong part in
> your puzzle.
>
> Regards
>
> Marcel
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2005-01-25 15:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-23 10:10 [Bluez-users] Can't init device hci0 (all information included), help! Thanx a lot!!! Embedded System
2005-01-23 17:14 ` Marcel Holtmann
2005-01-24 3:54 ` Embedded System
2005-01-24 8:19 ` Michal Semler
2005-01-24 10:05 ` Embedded System
2005-01-24 12:22 ` Marcel Holtmann
2005-01-25 15:23 ` Embedded System [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c93f2a2905012507235443cd88@mail.gmail.com \
--to=embed.sys@gmail.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox