From: Marcos Paulo de Souza <marcos@mpdesouza.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>,
dsterba@suse.com, linux-btrfs@vger.kernel.org
Subject: [PATCH 1/3] progs: Remove manpages of not packaged binaries
Date: Sun, 1 Mar 2020 00:33:42 -0300 [thread overview]
Message-ID: <20200301033344.808-2-marcos@mpdesouza.com> (raw)
In-Reply-To: <20200301033344.808-1-marcos@mpdesouza.com>
From: Marcos Paulo de Souza <mpdesouza@suse.com>
btrfs-find-root and btrfs-select-super stopped to be shipped in 2014, so
remove all references to these manpages as well.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
---
.gitignore | 2 -
Documentation/Makefile.in | 2 -
Documentation/btrfs-find-root.asciidoc | 35 -----------------
Documentation/btrfs-select-super.asciidoc | 46 -----------------------
Documentation/btrfs.asciidoc | 2 -
5 files changed, 87 deletions(-)
delete mode 100644 Documentation/btrfs-find-root.asciidoc
delete mode 100644 Documentation/btrfs-select-super.asciidoc
diff --git a/.gitignore b/.gitignore
index aadf9ae7..2b1c1aef 100644
--- a/.gitignore
+++ b/.gitignore
@@ -73,7 +73,6 @@
/Documentation/btrfs-convert.8
/Documentation/btrfs-device.8
/Documentation/btrfs-filesystem.8
-/Documentation/btrfs-find-root.8
/Documentation/btrfs-image.8
/Documentation/btrfs-inspect-internal.8
/Documentation/btrfs-ioctl.3
@@ -87,7 +86,6 @@
/Documentation/btrfs-rescue.8
/Documentation/btrfs-restore.8
/Documentation/btrfs-scrub.8
-/Documentation/btrfs-select-super.8
/Documentation/btrfs-send.8
/Documentation/btrfs-subvolume.8
/Documentation/btrfs.8
diff --git a/Documentation/Makefile.in b/Documentation/Makefile.in
index d35cb858..ff0459c0 100644
--- a/Documentation/Makefile.in
+++ b/Documentation/Makefile.in
@@ -4,10 +4,8 @@ MAN8_TXT =
# Top level commands
MAN8_TXT += btrfs.asciidoc
MAN8_TXT += btrfs-convert.asciidoc
-MAN8_TXT += btrfs-find-root.asciidoc
MAN8_TXT += btrfs-image.asciidoc
MAN8_TXT += btrfs-map-logical.asciidoc
-MAN8_TXT += btrfs-select-super.asciidoc
MAN8_TXT += btrfstune.asciidoc
MAN8_TXT += fsck.btrfs.asciidoc
MAN8_TXT += mkfs.btrfs.asciidoc
diff --git a/Documentation/btrfs-find-root.asciidoc b/Documentation/btrfs-find-root.asciidoc
deleted file mode 100644
index 652796c8..00000000
--- a/Documentation/btrfs-find-root.asciidoc
+++ /dev/null
@@ -1,35 +0,0 @@
-btrfs-find-root(8)
-==================
-
-NAME
-----
-btrfs-find-root - filter to find btrfs root
-
-SYNOPSIS
---------
-*btrfs-find-root* [options] <device>
-
-DESCRIPTION
------------
-*btrfs-find-root* is used to find the satisfied root, you can filter by
-root tree's objectid, generation, level.
-
-OPTIONS
--------
--a::
-Search through all metadata extents, even the root has been already found.
--g <generation>::
-Filter root tree by it's original transaction id, tree root's generation in default.
--o <objectid>::
-Filter root tree by it's objectid,tree root's objectid in default.
--l <level>::
-Filter root tree by B-+ tree's level, level 0 in default.
-
-EXIT STATUS
------------
-*btrfs-find-root* will return 0 if no error happened.
-If any problems happened, 1 will be returned.
-
-SEE ALSO
---------
-`mkfs.btrfs`(8)
diff --git a/Documentation/btrfs-select-super.asciidoc b/Documentation/btrfs-select-super.asciidoc
deleted file mode 100644
index e3bca98b..00000000
--- a/Documentation/btrfs-select-super.asciidoc
+++ /dev/null
@@ -1,46 +0,0 @@
-btrfs-select-super(8)
-=====================
-
-NAME
-----
-btrfs-select-super - overwrite primary superblock with a backup copy
-
-SYNOPSIS
---------
-*btrfs-select-super* -s number <device>
-
-DESCRIPTION
------------
-Destructively overwrite all copies of the superblock
-with a specified copy. This helps in certain cases, for example when write
-barriers were disabled during a power failure and not all superblocks were
-written, or if the primary superblock is damaged, eg. accidentally overwritten.
-
-The filesystem specified by 'device' must not be mounted.
-
-NOTE: *Prior to overwriting the primary superblock, please make sure that the backup
-copies are valid!*
-
-To dump a superblock use the *btrfs inspect-internal dump-super* command.
-
-Then run the check (in the non-repair mode) using the command *btrfs check -s*
-where '-s' specifies the superblock copy to use.
-
-Superblock copies exist in the following offsets on the device:
-
-- primary: '64KiB' (65536)
-- 1st copy: '64MiB' (67108864)
-- 2nd copy: '256GiB' (274877906944)
-
-A superblock size is '4KiB' (4096).
-
-OPTIONS
--------
--s|--super <superblock>::
-use 'superblock'th superblock copy, valid values are 0 1 or 2 if the
-respective superblock offset is within the device size
-
-SEE ALSO
---------
-`btrfs-inspect-internal`(8),
-`btrfsck check`(8)
diff --git a/Documentation/btrfs.asciidoc b/Documentation/btrfs.asciidoc
index 1625f6d8..e3328942 100644
--- a/Documentation/btrfs.asciidoc
+++ b/Documentation/btrfs.asciidoc
@@ -115,8 +115,6 @@ Tools that are still in active use without an equivalent in *btrfs*:
*btrfs-convert*:: in-place conversion from ext2/3/4 filesystems to btrfs
*btrfstune*:: tweak some filesystem properties on a unmounted filesystem
-*btrfs-select-super*:: rescue tool to overwrite primary superblock from a spare copy
-*btrfs-find-root*:: rescue helper to find tree roots in a filesystem
Deprecated and obsolete tools:
--
2.25.0
next prev parent reply other threads:[~2020-03-01 3:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-01 3:33 [PATCH 0/3] progs: fix testsuite Marcos Paulo de Souza
2020-03-01 3:33 ` Marcos Paulo de Souza [this message]
2020-03-01 8:26 ` [PATCH 1/3] progs: Remove manpages of not packaged binaries Qu Wenruo
2020-03-01 14:28 ` Marcos Paulo de Souza
2020-03-02 20:02 ` David Sterba
2020-03-01 3:33 ` [PATCH 2/3] progs: Include btrfs-find-root and btrfs-select-super in testsuite Marcos Paulo de Souza
2020-03-02 0:02 ` Qu Wenruo
2020-03-01 3:33 ` [PATCH 3/3] progs: tests: misc: btrfs-{find-root,select-super} are internal commands Marcos Paulo de Souza
2020-03-02 0:03 ` Qu Wenruo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200301033344.808-2-marcos@mpdesouza.com \
--to=marcos@mpdesouza.com \
--cc=dsterba@suse.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=mpdesouza@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox